CE-Hydraulic lab

 | Post date: 2020/01/11 | 
Hydraulic Laboratory

Head: Prof. Amir Reza Zarrati
Email: zarratiaut.ac.ir

Technician: Vahid Abdi

Telephone: +98(21)64543072
Address: Hydraulic Laboratory, Negative Second Floor, Building No. 2, Department of Civil and Environmental Engineering, Amirkabir University of Technology, Hafez Ave., Tehran, Iran


The Hydraulic Laboratory of the Department of Civil & Environmental Engineering in Amirkabir University of Technology (Tehran Polytechnic) has been constructed in an area of 32×12 Square meters with a height of 8.5 m. The water rotation system in this lab is in the form of an underground Channel that acts as a water reservoir and flows through pumps with different capacities in flumes and models. Underground Channels have been constructed throughout the laboratory and thus allow water to be drained from all locations. The width of the Channels is one meter and their depths up to 1.8 meters and in total, about 80 cubic meters of water can be stored inside these Channels. The bottom of the Channels is sloping to an overflow and wells to drain in emergencies or to be washed in emergencies.
Professors in response to the need for small and large civil industrial projects are invited to collaborate on various hydraulic and fluid mechanics experiments in various laboratory areas and workshop experiments, demonstrating the activity of this laboratory.
A summary of the major experimental facilities is given below
device name
Numbers, dimensions and accuracy
1 Bed profiler one, adjustable on each flume, millimeter precision Bed topography
2 ADV (16hz) one, usable in flume and in nature, capable of capturing sixteen values per second Impress the speed distribution
3 ADV (200hz) one, usable in flume, capable of capturing 200 values per second Impress the speed distribution
4 Ultra Sonic 8 installable on each flume, millimeter precision Water level
5 Transducer 4 usable per flume, with high accuracy Water pressure
6 Camera high Frequency Fast Flow Changes
7 Point Gage Installable on any flume, millimeter precision Water level and bed topography
8 Lab flume 4 flumes : widths of 25, 50, 60, 75 cm Investigation of all kinds of hydraulic tests
Different parts of the laboratory

The hydraulic laboratory consists of two parts

A. Undergraduate
The undergraduate course in Hydraulics and Fluid Mechanics for students to practice and deal with theoretical issues in the following tests.
  1. Specific 5-meter channel for tests such as hydraulic jump test, wide-flow overflow, uniform flow, rough bed, etc.
  2. Testing of triangular and rectangular overflows
  3. Testing the orifice and launch jet
  4. Motion size test
  5. Reynolds number test
  6. Friction test along pipe line
  7. Wind tunnel device (pressure distribution on objects of different shapes)
B. Graduate
To carry out research projects and graduate studies. This section consists of large flumes that are modeled by placing different types of flow mechanism hydraulic structures, scour mechanism and sediment movement.
The lab also offers hydraulic related research and research projects in the form of master's and doctoral dissertations.
C. the Hydraulic Laboratory is fully prepared to conduct research on the physical models of hydraulic and river structures and to perform physical model experiments to finalize designs for such structures and to provide advice to the water industry.

View: 681 Time(s)   |   Print: 98 Time(s)   |   Email: 0 Time(s)   |   0 Comment(s)