Arman Zarebidaki - Amirkabir University of Technology

Supervised MSc Theses

#

Thesis title

By

Date

1

Synergistic effect of cerium nitrate and plant extracts as a corrosion inhibitor of plain carbon steel

Mohammadmahdi Vafaei & Arman Zarebidaki

March 2024

2

Investigation of coating behavior of Ni-Cu-P-SiC electroless nanocomposite

Mahdi Akbarpour & Arman Zarebidaki

February 2024

3

Design and Construction of Prototype Lander For Shallow Water Buoys

Amirhossein Amini & Arman Zarebidaki

February 2024

4

Investigation of the effect of Ni content on the corrosion behavior of copper-nickel alloys

Pooyan Tahaghoghi Sayar & Arman Zarebidaki

February 2023

5

Investigating the corrosion behavior of electrodeposited Fe-P coatings

Seyed Hesamaldin Lari Seyed Zadeh & Arman Zarebidaki

March 2022

6

Study of the surface morphology and corrosion behavior of alloy coating Ni-Cu-P on steel substrate

Marziye Karimi Haje Khadmi & Arman Zarebidaki

September 2021

7

Investigation of corrosion inhibition of copper-nickel alloy by 2-mercaptobenzothiazole in near-neutral and acidic solution

Farzane Iranmaneshbahri & Arman Zarebidaki

March 2021

8

Analysis ,health monitoring and dimension control of marine structureby cad model and 3d camera

Abdulmotaleb Mirshekari & Arman Zarebidaki

October 2020

9

Application and Evaluation of Corrosion Properties of TiO2 / Hydroxyapatite Nanocomposite Coating via Anodizing Method

Atena Salehi Nodej & Arman Zarebidaki

September 2020

10

An investigation on AZ91 nanocomposite reinforced by carbon nanotubes

Behrouz Mohammadhassanizadeh & Arman Zarebidaki

February 2020

11

Electrodeposition and corrosion resistance behaviour of Zn-Ni/TiO2 composite coatings

Saba Dehghan & Arman Zarebidaki

May 2019

12

Corrosion properties of Mg/Al2O3 composite layer fabricated by friction stir process on Mg alloys

Sohrab Aghevlian & Arman Zarebidaki

March 2019

13

Investigation of corrosion protection behavior of epoxy coating containing calcium carbonate particles modified by cerium sulfate applied on steel

Morteza Rahimi Holori & Arman Zarebidaki

March 2019

14

Investigation of corrosion protection behavior of epoxy coating containing calcium carbonate micro particles modified by cerium nitrate applied on steel

Ali Dastgheib & Arman Zarebidaki

February 2018

15

Investigation of corrosion inhibition behavior of copper by 2-mercaptobenzothiazole in near-neutral solution

Vahid Salarhoseini & Arman Zarebidaki

February 2018

Books

#

Title

Author(s)

Publisher country

publication date

version

Portal Records

1

Green corrosion inhibitors

Arman Zarebidaki, Ali Pourghasemi Hanza, Taher Rabizadeh

Iran (Islamic Republic of)

June 2018

1

2

Green corrosion inhibitors

Arman Zarebidaki, Ali Pourghasemi Hanza, Taher Rabizadeh

Iran (Islamic Republic of)

August 2019

2

Journal Papers

Portal Records

1

Arman Zarebidaki, Pooyan Tahaghoghi Sayar, "Long-Term Corrosion Behavior of Cu-10Ni and Cu-20Ni Alloys in Simulated Seawater", JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, February 2024 Vol. -, Num. 0, Page 0-0, February 2024,

2

Arman Zarebidaki, Soroosh Davoodi, "Electrodeposition and Characterization of Fe-P Coating Applied onto Mild Steel Substrate", JOM, December 2023 Vol. -, Num. 0, Page 1-7, December 2023,

3

Arman Zarebidaki, Seyed Hesamaldin Lari Seyed Zadeh, "Effect of P Content on the Corrosion Behavior of Electrodeposited Fe-P Coatings", JOURNAL OF THE ELECTROCHEMICAL SOCIETY, February 2023 Vol. 170, Num. 22501, Page 1-9, February 2023,

4

Arman Zarebidaki, Seyed Haman Hedaiatmofidi, Farzane Iranmaneshbahri, "Effect of 2-mercaptobenzothiazole on the corrosion inhibition of Cu–10Ni alloy in 3 wt% NaCl solution", JOURNAL OF APPLIED ELECTROCHEMISTRY, September 2022 Vol. 52, Num. 0, Page 1773-1788, September 2022,

5

Arman Zarebidaki, Seyed Haman Hedaiatmofidi, Farzane Iranmaneshbahri, "Evaluation of corrosion behavior of Cu-10Ni alloy in 3 wt% NaCl solution through EIS and ENM methods", MRS Advances, July 2022 Vol. 0, Num. 0, Page 0-0, July 2022,

6

Arman Zarebidaki, Seyed Haman Hedaiatmofidi, Atena Salehi Nodej, "Corrosion mechanism of titanium dioxide nanotubes in Ringer’s solution", Materialstoday Communications, October 2021 Vol. 29, Num. 0, Page 102943-102943, October 2021,

7

Behrouz Mohammadhassanizadeh, Seyed Haman Hedaiatmofidi, Arman Zarebidaki, "Effect of friction stir process on the microstructure and corrosion behavior of AZ91 Mg alloy", MATERIALS CHEMISTRY AND PHYSICS, July 2021 Vol. 267, Num. 1, Page 0-0, July 2021,

8

Ali Dastgheib, Arman Zarebidaki, Mohammad Reza Mohammadzadehattar, "Enhanced barrier properties of epoxy coating containing CaCO3 microparticles modified with cerium nitrate", PROGRESS IN ORGANIC COATINGS, March 2020 Vol. 144, Num. 2020, Page 1-6, March 2020,

9

Saeed Asadi Kouhanjani, Arman Zarebidaki, Ali Akbarib, "The Effect of Sliding Speed and Amount of Loading on Friction and Wear Behavior of Cu-0.65%wt.Cr Alloy", JOURNAL OF ALLOYS AND COMPOUNDS, November 2019 Vol. 489, Num. 0, Page 319-324, November 2019,

10

Abdolreza Mostafanejad, Mehdi Iranmanesh, Arman Zarebidaki, "Investigation of Corrosion Behavior of Submerged Arc Welded A131/A and A131/AH32 Steels in Simulated Seawater", , October 2019 Vol. 22, Num. 32, Page 7-19, October 2019,

11

Abdolreza Mostafanejad, Mehdi Iranmanesh, Arman Zarebidaki, "An experimental study on stress corrosion behavior of A131/A and A131/AH32 low carbon steels in simulated seawater", OCEAN ENGINEERING, September 2019 Vol. 188, Num. 106204, Page 1-9, September 2019,

12

Ali Dastgheib, Mohammad Reza Mohammadzadehattar, Arman Zarebidaki, "Evaluation of Corrosion Inhibition of Mild Steel in 3.5 wt% NaCl Solution by Cerium Nitrate", METALS AND MATERIALS INTERNATIONAL, August 2019 Vol. 0, Num. 0, Page 1-9, August 2019,

13

Nasrollah Eslamzadeh, Reza Ebrahimi-Kahrizsangi, Saeed Karbasi, Arman Zarebidaki, Farhad Gharavi, "Effect of Duty Cycle on the Corrosion of Mg PEO Coatings", INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, June 2018 Vol. 13, Num. 0, Page 6236-6247, June 2018,

14

Vahid Salarhoseini, Arman Zarebidaki, Mohammad Reza Mohammadzadehattar, "The Effect of Concentraton and Temperature on the Behavior of Copper Corrosion Inhibition by 2 - Mercaptobenzothiazole", , May 2018 Vol. 18, Num. 28, Page 37-48, May 2018,

15

Arman Zarebidaki, Amir Seifoddini, Taher Rabizadeh, "Corrosion resistance of Fe77Mo5P9C7.5B1.5in-situ metallic glass matrix composites", JOURNAL OF ALLOYS AND COMPOUNDS, March 2018 Vol. 736, Num. 0, Page 17-21, March 2018,

16

Nasrollah Eslamzadeh, Reza Ebrahimi-Kahrizsangi, Saeed Karbasi, Arman Zarebidaki, Farhad Gharavi, "An Investigation into the Corrosion Behavior of MgO/ZrO2 Nanocomposite Coatings Prepared by Plasma Electrolytic Oxidation on the AZ91 Magnesium Alloy", JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, September 2017 Vol. 0, Num. 0, Page 1-10, September 2017,

17

Z. Shahri, S.R. Allahkaram, Arman Zarebidaki, "Electrodeposition and characterization of Co–BN (h) nanocomposite coatings", APPLIED SURFACE SCIENCE, October 2013 Vol. 276, Num. 276, Page 174-181, October 2013,

18

S.R. Allahkaram, Arman Zarebidaki, T. Rabizadeh, "EVALUATION OF ELECTROLESS NI-P AND NI-P NANO-COMPOSITE COATINGS’ PROPERTIES", International Journal of Modern Physics:Conference Series(IJMPCS), September 2012 Vol. 5, Num. 5, Page 817-824, September 2012,

19

Arman Zarebidaki, S.R. Allahkaram, "Evaluation of corrosion properties of electroless NiP/Nano- SiC composite coatings", Key Engineering Materials, December 2011 Vol. 2011, Num. 471, Page 203-208, December 2011,

20

Arman Zarebidaki, S.R. Allahkaram, "Porosity measurement of electroless Ni–P coatings reinforced by CNT or SiC particles", SURFACE ENGINEERING, November 2011 Vol. 28, Num. 6, Page 400-405, November 2011,

21

Arman Zarebidaki, S.R. Allahkaram, "Corrosion assessment of electroless nickel–phosphorous/nanosilicon carbide composite coatings", MICRO & NANO LETTERS, October 2011 Vol. 11, Num. 6, Page 937-940, October 2011,

22

Arman Zarebidaki, S.R. Allahkaram, "Effect of heat treatment on the properties of electroless Ni–P–carbon nanotube composite coatings", MICRO & NANO LETTERS, September 2011 Vol. 1, Num. 7, Page 90-94, September 2011,

23

Arman Zarebidaki, S.R. Allahkaram, "Effect of surfactant on the fabrication and characterization of Ni-P-CNT composite coatings", JOURNAL OF ALLOYS AND COMPOUNDS, December 2010 Vol. 2011, Num. 509, Page 1836-1840, December 2010,

24

S.R. Allahkaram, M. Honarvar Nazari,, S. Mamaghani,, Arman Zarebidaki, "Characterization and corrosion behavior of electroless Ni–P/nano-SiC coating inside the CO2 containing media in the presence of acetic acid", MATERIALS & DESIGN, July 2010 Vol. 32, Num. 2, Page 750-755, July 2010,

25

T. Rabizadeh, S.R. Allahkaram, Arman Zarebidaki, "An investigation on effects of heat treatment on corrosion properties of Ni–P electroless nano-coatings", MATERIALS & DESIGN, February 2010 Vol. 31, Num. 7, Page 3174-3179, February 2010,

26

Saeed Asadi Kouhanjani, Arman Zarebidaki, Morteza Abedini, Nader Parvin, "Influence of prior cold working on the tribological behavior of Cu–0.65 wt.%Cr alloy", JOURNAL OF ALLOYS AND COMPOUNDS, December 2008 Vol. 2009, Num. 480, Page 505-509, December 2008,

27

F. Akhlaghi, Arman Zarebidaki, "Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024–graphite composites produced by in situ powder metallurgy method", WEAR, December 2007 Vol. 2008, Num. 266, Page 37-45, December 2007,

Conference Papers

Portal Records

1

Arman Zarebidaki, Seyed Hesamaldin Lari Seyed Zadeh, "Effects of electroplating parameters on the properties of Fe-P coating ", The 10th International Conference on Materials and Metallurgical Engineering, November 2021

2

Atena Salehi Nodej, Arman Zarebidaki, Seyed Haman Hedaiatmofidi, "Investigation of the corrosion behavior of nanotubes produced via anodizing process on commercial pure titanium ", 8th Iran International Conference & Exhibition on Materials Science & Metallurgical Engineering, October 2019

3

Behrouz Mohammadhassanizadeh, Seyed Haman Hedaiatmofidi, Arman Zarebidaki, "Investigation of the effect of microstructure on the corrosion behavior of AZ91 magnesium based alloy after stir friction process ", 8th Iran International Conferenece & Exhibition on Materials Science & Metallurgical Engineering, October 2019

4

Morteza Rahimi Holori, Mohammad Reza Mohammadzadehattar, Arman Zarebidaki, "Lanthanum nitrate as a corrosion inhibitor for low carbon steel in 3.5 wt. % NaCl solution ", 7th International Conference on Materials Engineering and Metallurgy, October 2018

5

Arman Zarebidaki, Saba Dehghan, Gholamali Ashoorizadeh Khorgoo, "The effect of nickel content on the corrosion resistance of electroplated Zn-Ni coatings ", 7th International Conference on Materials Engineering and Metallurgy, October 2018

6

Sohrab Aghevlian, Arman Zarebidaki, Seyed Haman Hedaiatmofidi, "Investigating the effect of friction process on the microstructure and corrosion properties of AZ31 alloy ", 7th International Conference on Materials Engineering and Metallurgy, October 2018

7

Vahid Salarhoseini, Arman Zarebidaki, Mohammad Reza Mohammadzadehattar, Ashurizade, "Corrosion inhibition of copper in 3 wt.% NaCl solution by 2-mercaptobenzothiazole ", International color & coating congress, ICCC2017, December 2017

8

Ali Dastgheib, Mohammad Reza Mohammadzadehattar, Arman Zarebidaki, "SMART protective ability of epoxy coatings loaded with CaCO3 microbeads impregnated with cerium nitrate applied on mild steel substrates ", International color & coating congress, ICCC2017, December 2017

9

Ali Dastgheib, Mohammad Reza Mohammadzadehattar, Arman Zarebidaki, Ashid Farokhi, "Electrochemical assessment of cerium nitrate as corrosion inhibitor for mild steel in 3.5 wt.% NaCl solution ", International color & coating congress, ICCC2017, December 2017

10

Arman Zarebidaki, "Effect of Ni Content on Corrosion Resistance of Fe_Based Amorphous Alloys ", 4th International Engineering Materials & Metallurgy Conference, November 2015

11

Parisa Hasanpoor, Amir Seifoddini, Arman Zarebidaki, "Corrosion resistance and thermal stability of amorphous and partially crystalline of Fe73.15Ni3.85Mo5P9C7.5B1.5 bulk metallic glass ", 4th International Engineering Materials & Metallurgy Conference, November 2015

12

A.S. Mozaffari, Amir Seifoddini, Arman Zarebidaki, "The effect of copper addition on the corrosion behavior of Fe41Co7Cr15Mo14Y2C15B6 Bulk glassy alloy ", 4th International Engineering Materials & Metallurgy Conference, November 2015

13

Arman Zarebidaki, "- ", -, November 2015

14

Zahra Kouhi, Faride Shahriari, Amir Seifoddini, Arman Zarebidaki, "Investigation of corrosion behavior of glass matrix composite alloys ", -, November 2015

Taught Courses

#

Course title

Description

Headlines

Date

1

Advance Corrosion Lab

The aim of the advanced corrosion laboratory course is to study the methods of corrosion rate evaluation, assessment or selection of materials in a particular environment with a particular application, evaluation of new and old metals and alloys to d

Spring 2024

2

Corrosion Engineering

The purpose of this course is to introduce the underlying science of corrosion and the fundamentals of corrosion engineering. The deterioration of the metallic components of critical structures by corrosion is often life-limiting. The direct cost of

Spring 2024

3

Corrosion, Repair and Maintenance Engineering

In this lesson, the corrosion processes of marine structures and the principles of maintenance and repair of these infrastructures will be studied.

Spring 2024

4

Materials Science

Materials science is an interdisciplinary field; That is, all its topics are mixed with science, technology, engineering and mathematics. In the field of engineering and material science, by examining the relationship between the properties and struc

Spring 2024

5

Prohibited Materials for Corrosion

The use of chemical inhibitors to decrease the rate of corrosion processes is quite varied. In the oil extraction and processing industries, inhibitors have always been considered to be the first line of defense against corrosion. A great number of s

Spring 2024

6

Advanced Corrosion

The overall aim of this course is to provide a deep understanding of the fundamental processes behind corrosion which is prerequisite for understanding the principles of corrosion protection. This is achieved by analyzing corrosion on several aspects

Fall 2023

7

Corrosion and Decay in Welded Zone

Despite the correct choice of base metal and filler metal, following the instructions, standards, codes and having sufficient penetration Corrosion and failure of the weld occurs in indusial corrosive environments. Generally corrosion resistance of t

Fall 2023

8

High Temperature Oxidation & Hot Corrosion

Oxidation is the most important corrosion reaction at high temperature that take place during the use of metals in oxidant atmosphere in some applications such as gas turbines, steam boilers and heat exchangers. Scaling, tarnishing and dry corrosion

Fall 2023

9

Advance Corrosion Lab

The aim of the advanced corrosion laboratory course is to study the methods of corrosion rate evaluation, assessment or selection of materials in a particular environment with a particular application, evaluation of new and old metals and alloys to d

Spring 2023

10

Prohibited Materials for Corrosion

The use of chemical inhibitors to decrease the rate of corrosion processes is quite varied. In the oil extraction and processing industries, inhibitors have always been considered to be the first line of defense against corrosion. A great number of s

Spring 2023

11

Corrosion and Decay in Welded Zone

Despite the correct choice of base metal and filler metal, following the instructions, standards, codes and having sufficient penetration Corrosion and failure of the weld occurs in indusial corrosive environments. Generally corrosion resistance of t

Fall 2022

12

High Temperature Oxidation & Hot Corrosion

Oxidation is the most important corrosion reaction at high temperature that take place during the use of metals in oxidant atmosphere in some applications such as gas turbines, steam boilers and heat exchangers. Scaling, tarnishing and dry corrosion

Fall 2022

13

New Method of Materials Study & Lab

In this course, the history of X-rays discovery will be reviewed and the physical principles of X-ray production and diffraction will be studied. Furthermore equipments, applications and limitations of XRD technique will be taught.

Fall 2022

Inventions/Patents

#

Invention title

Reg. number

Country

contributers

Reg. date

Exp. date

1

Smart epoxy coating containing calcium carbonate modified via serium nitrate through self healing ability against corrosion

98890

2019/07/1

2038/01/19