AHMAD AREFAZAR - Amirkabir University of Technology

The effect of grafted glycidyl methacrilate on physical and mechanical properties and compatibility of recycled PET and SBR blends in presence of nanoclay

Sadegh Darvishi & Ahmad Arefazar

March 2019

Effect of Compatibilizer and Graphene Oxide on the Morphology and Mechanical Properties PA6/ SBR

Ramin Mirzaee Porkoli & Ahmad Arefazar

February 2019

Effect of morphology on Properties of PC/Nylon6 blend filled by graphene oxide nanoparticle

Mohammad Soroush Abzan & Ahmad Arefazar

February 2019

Effect of graphene oxide nano particle on compatibility and morphology of polycarbonate and SAN blend

Mehrad Zakizadeh Tabari & Ahmad Arefazar

October 2018

Study of morphology in NBR/SBR blends and compatibilization with functionalized SBR

Mohammad Javadzadeh & Ahmad Arefazar

September 2018

study on compatibility of nano graphene on LLDPE / poly(1-hexen) blends

Somayeh Esmaeili & Ahmad Arefazar

February 2018

Investigation of effect modified nano graphene oxide on morphology and performance polycarbonate membrane in order to separation of water and oil

Rasool Behboud & Ahmad Arefazar

February 2018

Effect of percentage of compatibilizing agent on the properties of PA6/SBR blends

Minoo Boroojerdi & Ahmad Arefazar

February 2018

An Investigation of Morphology and Properties of NR/NBR Blends Using Compatibilizer in the of Presence CaCO3 Nanoparticles

Saeid Bolfereisi & Ahmad Arefazar

May 2017

The investigation on the effect of MA and GMA compatibilizer on NBR/PP thermoplastic elastomer

Moslem Behjati & Ahmad Arefazar

October 2016

The functionalized of graphene oxide for application in polymeric nanocomposite membranes

Reihaneh Kaveh & Ahmad Arefazar

August 2015

Influence of multi wall carbon nanotubes on the morphology and mechanical properties of PA6/PC/NBR ternary blend

Mehrdad Zakeri & Ahmad Arefazar

March 2014

Effect of mixing sequence of nanoclay on toughness of PC/NBR blends

Armin Ourang & Ahmad Arefazar

February 2014

Influence of Multiwall Carbon Nanotubes on the Morphology and Mechanical Properties of Polyamide 6/ Styrene Acrylonitrile Copolymer (SAN) Blends

Mohammad Reza Maleki Sedeh & Ahmad Arefazar

October 2013

Study on the morphology and Mechanical propertice of Ternary blend based on PC/ PA6/ SEBS

Seyedh Zeinab Hashemi Asl & Ahmad Arefazar

October 2013

Improved mechanical properties of NR/EPDM blends by maleic-anhydride grafted EPDM

Elaheh Ezati & Ahmad Arefazar

October 2012

Study of nanocomposites based on pet/ single walled carbon nanotubes

Amir Keshavarzi Nezhad & Ahmad Arefazar

October 2012

Effect of compatibilizer on properties of TPV (HDPE/NR

Jaber Khourshid Savar & Ahmad Arefazar

October 2012

Consideration of carbon fibers surface modified using plasma and corona effect on properties of epoxy /carbon fiber composite

Mazdak Estiri & Ahmad Arefazar

October 2011

Effect of morphplogy and nanoclay content on mechanical and thermal properties of ABS/PMMA blends

Tayebeh Nazari & Ahmad Arefazar

January 2011

Astudy on Toughening of PA66/ Nanoclay/ Rubber Hybrid Nanocomposites

Maryam Roshanali & Ahmad Arefazar

November 2010

Study of ternary blend based on PET/PP/EVA

Mohammadmahdi Abolhasani & Ahmad Arefazar

December 2008

PREPARATION AND INVESTIGATION OF PC/PET - BASED BLEND MICROSTRUCTURE WITH LANTHANUM (III)

Payam Zahedi & Ahmad Arefazar

September 2007

PREPARATION OF ABS/GF COMPOSITES AND STUDY OF A NEW COMPATIBILIZERS EFFECT

Shirin Shokohi & Ahmad Arefazar

September 2007

STUDY OF RECYCLING OF PET THROUGH BLENDING WITH ABS AND RELATIONSHIP BETWEEN MORPHOLOGY WITH COMPOSITION AND MECHANICAL

Soheila Lashgari & Ahmad Arefazar

March 2007

STUDY ON MORPHOLOGY IN POLYBLENDS BASED ON PVC/ABS (EVALUATION THE EFFECT OF CONCENTRATION AND COMPATIABILITY) PREPARATI

Yashar Davoodi & Ahmad Arefazar

March 2007

Books

Title

Author(s)

Publisher country

publication date

version

Portal Records

polymer blends

Ahmad Arefazar, Shirin Shokoohi

Iran (Islamic Republic of)

December 2010

Journal Papers

Portal Records

Mohammad Mehdi Seraji, Ahmad Arefazar, "Thermal ablation-insulation performance, microstructure, and mechanical properties of carbon aerogel based lightweight heat shielding composites.", POLYMER ENGINEERING AND SCIENCE, February 2021 Vol. 1, Num. 1, Page 1-15, February 2021,

Mohammad Mehdi Seraji, Ahmad Arefazar, "Microstructural peroperties, thermal insulation and thermal degradition behavior of boron-contaning monolihtic novolac xerogels", JOURNAL OF APPLIED POLYMER SCIENCE, September 2020 Vol. 1, Num. 5, Page 1-14, September 2020,

Azin Paydayesh, Atemeh Pashaei Soorbaghi, Ahmad Arefazar, Azam Jalali Arani, "Electrical Conductivity of Graphene Filled PLA/PMMA Blends: Experimental Investigation and Modeling", POLYMER COMPOSITES, January 2018 Vol. -, Num. 0, Page 0-0, January 2018,

Alireza Baghban, Ahmad Arefazar, "ANFIS modeling of CO2 separation from natural gas using hollow fiber polymeric membrane", ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, November 2017 Vol. 8, Num. 1, Page 1-7, November 2017,

Bentol Hoda Gholi Zadeh Talaboni, Ahmad Arefazar, Mehdi Barikani, Mehdi Hemmti, "Polar/nonpolar gas Transfer through PEO-based copolymers membraines", JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY, October 2017 Vol. 54, Num. 11, Page 796-804, October 2017,

Shahrzad Rahmani, Ahmad Arefazar, Masoud Latifi, "PMMA/PS coaxial electrospinning ; a statical analysis on processing parameters", Materials Research Express, August 2017 Vol. 4, Num. 0, Page 1-9, August 2017,

Samire Sabagh, Ahmad Arefazar, Ahmad Reza Bahramian, "High temperature ablation and thermo-physicalproperties improvment of carbon fiber reinced composites using graphene oxide nanopoder:", COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, July 2017 Vol. 101, Num. 0, Page 326-333, July 2017,

Bentol Hoda Gholi Zadeh Talaboni, Ahmad Arefazar, "Removal of hydrogen sulfide from methane using PEO-segmented copolymer-based multilayer composite membrane", SEPARATION SCIENCE AND TECHNOLOGY, April 2017 Vol. 52, Num. 13, Page 2190-2198, April 2017,

Shahrzad Rahmani, Ahmad Arefazar, Masoud Latifi, "PMMA/PS coaxial electrospinning : core-shell fiber morphology as a function of material parameters", Materials Research Express, March 2017 Vol. 4, Num. 3, Page 1-8, March 2017,

Reihaneh Kaveh, Zahra Shariatinia, Ahmad Arefazar, "Improvement of polyacrylonitrile ultrafiltration membranes’ properties using decane-functionalized reduced graphene oxide nanoparticles", WATER SCIENCE AND TECHNOLOGY, October 2016 Vol. 16, Num. 5, Page 1378-1387, October 2016,

Samire Sabagh, Ahmad Arefazar, Ahmad Reza Bahramian, "Thermomechanical erosion and thermophysical properties of phenolic resin / carbon fiber / graphite nanocomposites", JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, October 2016 Vol. 23, Num. 2, Page 1-12, October 2016,

Azin Paydayesh, Ahmad Arefazar, Azam Jalali Arani, "A morphological study on the migration and selective localization of graphene in the PLA/PMMA blends", JOURNAL OF APPLIED POLYMER SCIENCE, August 2016 Vol. 5, Num. 1, Page 1-12, August 2016,

Amir Kave, Ahmad Arefazar, "Effect of Functionalized Graphene Oxide Nanosheets on the Morphologies and Antifouling Peroperties of Polyamid composites Membranes", JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, January 2016 Vol. 0, Num. 0, Page 1-10, January 2016,

Amir Kave, Ahmad Arefazar, "SURFACE MODIFICATION OF GRAPHENE OXIDE AND INVESTIGATION OF ITS EFFECT ON SURFACE PROPERTIES OF ARAMID MEMBRANE", POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, December 2015 Vol. 54, Num. 15, Page 1606-1614, December 2015,

Amir Kave, Ahmad Arefazar, "Surface Modification of Graphene Oxide and Imvestigation of its Effect on surface Properties of Aramid Membranes", POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, December 2015 Vol. 0, Num. 0, Page 1606-1614, December 2015,

Azin Paydayesh, Ahmad Arefazar, Azam Jalali Arani, "Investigation the effect of Graphene on The Morphology, Mechanical and Thermal properties of PLA/PMMA Blends", Ciencia E Natura, December 2015 Vol. 37, Num. 1, Page 15-22, December 2015,

Azin Paydayesh, Ahmad Arefazar, Azam Jalali Arani, "A Change of phase Morphology in poly lactic acid / methyl methacrylate Blends induced by Graphene nano sheets", JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, December 2015 Vol. 54, Num. 12, Page 1466-1478, December 2015,

Azin Paydayesh, Ahmad Arefazar, Azam Jalali Arani, "A Change of Phase Morphology in Poly Lactic Acid/Poly Methyl Methacrylate Blends Induced by Graphene Nano Sheets", JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, September 2015 Vol. 54, Num. 0, Page 1466-1478, September 2015,

Amir Babaei, Ahmad Arefazar, Mohsen Shahrousvand, Ali Shabani, "Investigation on the Morphological and Mechanical Properties of ( ) Polyamide 6 / ( poly styrene - co - acrylonitrile ) / polystyrene - b - ethylene - co butylene _ b - styrene ) Ternary Blends", JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, July 2015 Vol. 5, Num. 0, Page 1-10, July 2015,

Amir Babaei, Ahmad Arefazar, "Structural, rheological , and mechanical properties of PA6/SAN/SEBS ternary blend/organoclay nanocomposites", JOURNAL OF APPLIED POLYMER SCIENCE, January 2015 Vol. 1, Num. 1, Page 348-356, January 2015,

Alireza Talaei, Faramarz Afshar Taromi, Ahmad Arefazar, Saeid Ahmadjo, , Omid Moini Jazani, "The influence of bridge type on the activity of supported metallocene catalysts in ethylene polymerization", CHINESE JOURNAL OF POLYMER SCIENCE, September 2014 Vol. 32, Num. 2, Page 137-142, September 2014,

Alireza Azizi, Ahmad Arefazar, Omid Moini Jazani, "Tensile behavior of polypropylene/polycarbonate/poly(styrene-b-(ethylene-co- butylene) -b-styrene)ternary blend:effect of core-shell particles", JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, January 2014 Vol. 5, Num. 8, Page 1-15, January 2014,

Amir Babaei, Ahmad Arefazar, "Effect of Maleated styrene/Ethylene-co-Butylene/Styrene on the dispersed particlesSize and Mechanicalproperties of polyamide6/poly(styrene-co-acrylonitrile(/poly(styrene-b-(ethylene-co-butylene)-b-styrene)Ternary Blends", JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, January 2014 Vol. 53, Num. 53, Page 1406-1420, January 2014,

Amir Babaei, Ahmad Arefazar, "Phase Structure of polyamide6/poly (styrene-co-acrylonitrile)and poly(styrene-b-(ethylene-co-butylene)-b-styrene)or poly(maleated styrene-co-butylene/styrene) Ternary Blends", JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, January 2014 Vol. 53, Num. 53, Page 1377-1393, January 2014,

Alireza Azizi, Ahmad Arefazar, Omid Moeini Jazani, "Fracture Micromechanisms of polypropylene/polycarbonate/poly(styrene-co-butylene)-b-styrene)(pp/pc/sebs)Ternary Blends:effect of SEBS content", JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, January 2014 Vol. 53, Num. 53, Page 1103-1115, January 2014,

Alireza Azizi, Ahmad Arefazar, Omid Moini Jazani, "Tensile behavior of polypropylene/polycarbonate/poly(styrene-b-(ethylene-co-butylene)-b-styrene)ternary blend:Effect of core-shell particles", JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, December 2013 Vol. 1, Num. 1, Page 1-15, December 2013,

Alireza Azizi, Ahmad Arefazar, Omid Moeini Jazani, "Effect of core-shell particles onFractuer Micromechanisms of pp/pc/sebs Ternery Blends", POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, December 2013 Vol. 52, Num. 52, Page 1595-1603, December 2013,

Alireza Azizi, Ahmad Arefazar, Omid Moini Jazani, "Effect of core-shell particleson fracture Micromechanisms pof PP/PC/SEBS Ternary Blends", POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, November 2013 Vol. 52, Num. 52, Page 1595-1603, November 2013,

M .R .Peymanfar, Ahmad Arefazar, O .Moini Gazani, M . R .Saeb, Alireza Talaei, B . Bahadory, "The Influence of NBR - g- GMA Compatibilizer on the Morphology and Mechanical Properties of Poly(ethylene terphthalate( / polycarbonate / NBR Ternary Blends", POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, March 2013 Vol. 52, Num. 52, Page 1-7, March 2013,

Ali Ebrahimi Jahromi, Ahmad Arefazar, Omid Moini Jazani, Morteza Ganjee Sari, Mohammad Reza Saeb, Mohammad Salehi, "Taguchi-Based Analysis of polyamide 6 / Acrylonitrile - Butadiene Rbber / Nanoclay Nanocomposites: the Role of processing Variables", JOURNAL OF APPLIED POLYMER SCIENCE, February 2013 Vol. 131, Num. 131, Page 1654-1665, February 2013,

O. Moini Jazani, Ahmad Arefazar, S .H . Jafar I, M . R . Peymanfar, M . R . Saeb, Alireza Talaei, "SEBS-g-MAH as a Reactive Compatibility Precursor for PP / PTT SEBS Ternary Blends : Morphology and Mechanical Properties", POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, November 2012 Vol. 52, Num. 52, Page 1-7, November 2012,

Marzieh Attari, Ahmad Arefazar, Gholamreza Bakhshandeh, "Optimise Toughening of PA6 / HDPE Nanoclay/ SEBS-g-MA Based Nanocomposite Systems", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, September 2012 Vol. 2, Num. 9, Page 642-647, September 2012,

B. Gholizadeh, Ahmad Arefazar, J.Barzin, "Morphology and Gas Permability of Polymeric Membra ne by PC / PA6 / nANOCLAY Ternary Nanocomposites", POLYMERS & POLYMER COMPOSITES, June 2012 Vol. 20, Num. 20, Page 271-278, June 2012,

Tayebeh Nazari, Hamid Garmabi, Ahmad Arefazar, "Effect of Clay Modification On the Morphology and the Mechanical / Physical Properties of ABS / PMMA bLENDS", JOURNAL OF APPLIED POLYMER SCIENCE, May 2012 Vol. 126, Num. 126, Page 1637-1649, May 2012,

Shirin Shokoohi, Ahmad Arefazar, Ghasem Naderi, "Compatibilized PP/EPDM/PA6 ternery blends: extended morphological studies", POLYMERS FOR ADVANCED TECHNOLOGIES, February 2012 Vol. 0, Num. 0, Page 0-0, February 2012,

Omid Moeeni Jazani, Ahmad Arefazar, S.H.Jafari, M.H.Beheshty, Ali Ghaemi, "A study on the Effects of SEBS-g-MAH ON THE PHASE mORPHOLOGY AND mECHANICAL pROPERTIES OF POLYPROPYLENE/POLYCARBONATE/sebs tERNERY POLYMER BLENDS", JOURNAL OF APPLIED POLYMER SCIENCE, August 2011 Vol. 121, Num. 121, Page 2680-2687, August 2011,

Shirin Shokoohi, Ahmad Arefazar, Ghasem Naderi, "Compatibilized polypropylene/ethylene-propylene-diene-monomer/polyamide6 ternery blends:effect oftwin screw extruder processing parameters", Materials and Design, December 2010 Vol. 1, Num. 32, Page 1697-1703, December 2010,

Omid Moeeni Jazani, Ahmad Arefazar, Mohammad Hosien Beheshty, "Study on the effect of processing condition on the mechanical properties ofPP/PC/SEBS ternery blends using Taguchi experimental analysis", e-polymers, December 2010 Vol. 1, Num. 117, Page 1-13, December 2010,

Soheila Lashgari, Ahmad Arefazar, Somayeh Lashgari, Somayyeh Mohammadian Gezaz, "Properties of waste-poly{ethylene terephthalate}/acrylonitrile butadiene styrene blends compatibilized with maleated acrylonitrile butadiene styrene", Journal of vinyl & additive technology, November 2010 Vol. 2, Num. 2, Page 246-253, November 2010,

Paridokht Mahallati, Ahmad Arefazar, Ghasem Naderi, "Thermoplastic Elastomer Nanocomposites based on PA6/NBR", INTERNATIONAL POLYMER PROCESSING, September 2010 Vol. 25, Num. 25, Page 132-138, September 2010,

Mohammad Abolhasanpour, Ahmad Arefazar, [en-name N/A], "effect of dispersed phase composition on morphological and mechanical properties of PET/EVA/PP ternary blends", , March 2010 Vol. , Num. 48, Page 0-0, March 2010,

Shirin Shokoohi, Ahmad Arefazar, "Effect of Coupling Agents on Polymer -Filler Surface Interactions ,Morphology and Properties of Fiber-Reinforced Thermoplastics", , October 2009 Vol. , Num. 17, Page 0-0, October 2009,

Shirin Shokoohi, Ahmad Arefazar, "Effect of Processing Conditions and Coupling Agents on ABS/SGF Composites Properties", , September 2009 Vol. , Num. 9, Page 0-0, September 2009,

Ali Hedayati, Ahmad Arefazar, "Study on dispersion and intercalation of organoclay in PP-g-MA matrices", Polymer Composites, August 2009 Vol. 2, Num. 2, Page 1-15, August 2009,

Ali Hedayati, Ahmad Arefazar, "Multi-scale analysis of polypropylene based organoclay containing composites, Part 1: Morphology", , April 2009 Vol. , Num. 28, Page 0-0, April 2009,

Shirin Shokoohi, Ahmad Arefazar, "A review on ternary immiscible polymer blends: morphology and effective parameters", , March 2009 Vol. , Num. 20, Page 0-0, March 2009,

Mohammadmahdi Abolhasani, Ahmad Arefazar, Shirin Shokoohi, "PET/EVA/PP Ternary Blends:An Investigation of Extended Morphological Properties", , January 2009 Vol. , Num. 112, Page 0-0, January 2009,

Morad Ali Khatibi, Ahmad Arefazar, "Microstructure and Properties of PET/EPDM,EPDM-g-MA/Organoclay Ternary Hybrid Nanocomposites :Effect of Blending Sequence", , December 2008 Vol. , Num. 164, Page 0-0, December 2008,

Payam Zahedi, Ahmad Arefazar, "Blends of Poly(ethylene terephthalate)/Polycarbonate by The Use of Lanthanumm Acetyl Acetonate Catalyst", , January 2008 Vol. , Num. 107, Page 0-0, January 2008,

Shirin Shokoohi, Ahmad Arefazar, Ramin Khosrokhavar, "Silane Coupling Agents in Polymer-Based Reinforced Composites:A Review", , January 2008 Vol. , Num. 5, Page 0-0, January 2008,

Mansoureh Mohseni Garakani, Ahmad Arefazar, Hossein Nazokdast, "Study on Morphological Rheological and Mechanical Properties of PP/SEBS -MA/SGF Hybrid Composites", , May 2007 Vol. , Num. 104, Page 0-0, May 2007,

Omid Moeeni Jazani, Ahmad Arefazar, "Blends of Poly(Ethylene Terephthalate )Bottle Waste With Modified Styrene Butadiene Rubber Through Reactive Mixing", , July 2006 Vol. , Num. 102, Page 0-0, July 2006,

Omid Moeeni Jazani, Ahmad Arefazar, "Study of Maleic Anhydride Melt Grafting Onto Styrene-Butadiene Rubber", , July 2006 Vol. 0, Num. 0, Page 0-0, July 2006,

Mohammadreza Firouzmanesh, Ahmad Arefazar, "Study of the effect of BDMA catalyst in the epoxy novolac curing process by isothermal DSC", , June 2005 Vol. , Num. 4, Page 0-0, June 2005,

Mohammad Reza Firoozmanesh, Ahmad Arefazar, "Study of thermal stability and ablation behavior of carbon/epoxy-novolac composites", , June 2003 Vol. , Num. 88, Page 0-0, June 2003,

Ahmad Arefazar, "polycarbonate/polyamide 6/nanoclay ternary nanocomposite membranes: preparation,characterasition,and gas separation properties", polymers and polymer composites, Vol. 17, Num. 3, Page 0-0, ,

Conference Papers

Portal Records

Mina Teymoori, Ahmad Arefazar, Hormoz Eslami, "Synthesize of poly( methyl methacrylate ) grft polybutadiene particles by dispersion polymerization in non-polar medium. ", The 9th International Chemical E NGINEERING cONGRESS AND eXHIBITION ( ICHEC 2015 ( ., December 2015

Farahnaz Nasiri, Ahmad Arefazar, Hormoz Eslami, "Effect of PH on the Morphology of crosslinked polystyrene/polyaniline Nanostructured Microparticles ", The 9th International chemical Engineering Congress and Exhibition ( ICHEC 2015 ), December 2015

Soheila Niazmand Aghdam, Ahmad Arefazar, Faramarz Afshar Taromi, Alimorad Rashidi, Masoud Dadras Chamachayi, "Investigation and modeling of effective preparation conditions on porosity diameter of polyethersulfone/graphene oxide membrane ", The 12th International Conference on Membrane Science and Technology, November 2015

Bentol Hoda Gholi Zadeh Talaboni, Ahmad Arefazar, Mohammad Hemmati, "Gas separation properties of PEO-based segmented polyurethane membranes ", The second Iran Membrane Conference, May 2015

Reihaneh Kaveh, Zahra Shariatinia, Ahmad Arefazar, Mehran Javanbakht, "Studying the effects of functionalization of nano graphene oxide for application in polymeric nanocomposite membranes ", Second National Conference on the Applied Researches in Chemistry, Biology and Geology Sciences, February 2015

Reihaneh Kaveh, Zahra Shariatinia, Ahmad Arefazar, Mehran Javanbakht, "The effects of modified graphene oxide on the morphology of polyactylonitrile membranes ", 2nd National Congress on Water Reuse, January 2015

Mona Bigdelii, Ali Kargari, Seyed Ali Alavi, Ahmad Arefazar, "Investigating the effect of polymer concentration and solvent of polymeric solution on the structural features of poly acrylonitrile ultrafiltration membrane ", 11th International Seminar on Polymer Science and Technology, October 2014

Sadegh Araski, Ahmad Arefazar, "Thermal and Mechanical properties of PC/SAN Blend andCarbon Nano tube Nanocomposite ", 11th International Seminar on polymer Science and Technology, October 2014

Amir Kave, Ahmad Arefazar, "The surface modification of Graphene Oxide and investigation of its effect on surface properties of Aramide mmembranes ", 11th International Scminar on polymer Science and Technology, October 2014

Farahnaz Nasiri, Abbas Raofian, Ahmad Arefazar, Hormoz Eslami, "Preparation of Micro-sized Styrenicparticle Diiiiiispersions,and polyamide6 composites therof ", 11th International Seminar on polymer Science and Technology, October 2014

Amir Babaei, Ahmad Arefazar, "Phase structure of polyamide6/poly(styrene-co-acrylonitrile) and poly(styrene-b-(ethylene-co-butylene)-b-styrene)Ternary Blends ", 11th International Seminar on polymer Science and Technology, October 2014

Amir Babaei, Ahmad Arefazar, "An Investigation on the correlation between the morphological and mechanical propertiesof PA6/SAN/SEBS Ternary Blends Incorporating SEBS-g-MA ", 11th International Seminar on polymer Science and Technology, October 2014

Farah Salehi Ravesh, Ahmad Arefazar, "The Effect of TIO2 and CaCo3 Nano particles on mechanical and thermal properties of PVC/ABS bLEND ", 11th International Seminar on polymer Science and Technology, October 2014

Alireza Azizi, Ahmad Arefazar, "Effect of SEBS ON mORPHOLOGY AND fRACTURE mICROMECHANISMS OF PP/PC/SEBS Terna ry Blends ", The 8th International Chemical Eng ineering Congress and Exhibition, February 2014

Mohammadreza Yazdani Sarvestani, Ahmad Arefazar, Omid Moeeni Jazani, M . R . Saeb, A . Aghajani, "Reactive compatibilization ofpolyamide 6 / polycarbonate blends by using Maleated SEBS ", The 8th International Seminar on polymer Science and Technology, October 2012

O . Moini Jazani, Ahmad Arefazar, S . H . Jafari, Mohammad Reza Saeb, "The evaluation and optimization of impact strengh of PP / PC / SEBS Ternary blends by Taguchi Methodology ", The 8th International Seminar on polymer Science and Technology, October 2012

Bentol Hoda Gholi Zadeh Talaboni, Ahmad Arefazar, "GaS TRANSPORT PROPERTIES OF BLEND MEMBRANES BASED POLYCARBONATE/POLYAMIDE6:effect of surface roghness ", The 8th International Seminar on polymer Science and Technology, October 2012

O . Moini Jazani, Ahmad Arefazar, S .H .Jafari, M . R .Saeb, "SEBS-g-MAH compatibilizer precursor for PP/PC/SEBS Ternary systems ", The 8 th International Seminar on polymer science and Technology, October 2012

Mostafa Ranjbar, Ahmad Arefazar, Gholam Reza Bakhshandeh, "Study on the Mechanical properties of PP / SEBS - g - MA / OMMT Nanocomposites ", Polymer Processing Society - asia/ australia reginal meeting -2011, November 2011

M.Ranjbar, Ahmad Arefazar, Gh.Bakhshandeh, "Constituting balance betwwn stiffness versus toughness in pp/sebs-g-ma/ organoclay nanocomposites ", The polymer Processing Societyy Asia/Australia Regional Meeting, November 2011

Morad Ali Khatibi, Ahmad Arefazar, Mesfandeh, Omid Moeeni Jazani, M.R. Peymanfar, "Effect of blending sequence on the microstructure and mechanhcal properties of PET/EPDM/EPDM-g-MA/organoclay ternery hybrid nanocomposites ", Polymer processhng society Asia/ Australia Reginal Meeting- pps 2011, November 2011

M.R. Yazdani, Ahmad Arefazar, Omid Moeeni Jazani, M.R. Saeb, A.Aghajani, "Reactive compatibilization of polyamide-6/polycarbonate Blends by using Maleated SEBS ", Polymer processing society Asia / Autralia Reginal Meeting - pps 2011, November 2011

Omid Moeeni Jazani, Ahmad Arefazar, S.H.Jafary, M.R.Saeb, "SEBS-g-MAH compatibilizer precursor for PP/PC/SEBS Terenery systems ", Polymer processing society Asia/ Australia Reginal Meeting - pps 2011, November 2011

M.Rajbar, Ahmad Arefazar, G.R. Bakhshandeh, "Study on the mechanical properties of PP/SEBS-g-MA/OMMT Nanocomposites ", Polymer processing society Asia / Australia Reginal Meeting - pps 2011, November 2011

Omid Moeeni Jazani, Ahmad Arefazar, S.H. Jafary, M.R. Saeb, "The evaluation and optimazation of impact strengthof PP/PC/SEBS ternery blend by using Taguchi Methodology ", Polymer processing society Asia / Australia Reginal Meeting - pps 2011, November 2011

Tayebeh Nazari, Hamid Garmabi, Ahmad Arefazar, "Effect of Polarity of the Organoclay on the Morphology and Mechanical Properties of Poly (acrylonitrile-butadiene-styrene)/Poly (methyl methacrylate) Blends ", 27th world congress of the polymer processing society- PPS27, May 2011

Maryam Roshanali, Hamid Garmabi, Ahmad Arefazar, "investigation of morphology and mechanical properties of rubber-toughened polyamide 66 nanocomposites ", 27th world congress of the polymer processing society- PPS27, May 2011

Amir Ebrahimi Jahromi, Ahmad Arefazar, Gholamreza Bakhshandeh, Omid Moeeni Jazani, "Rubber Toughening nof polyamide 6 Nanocomposites ", International Congress on Nanoscience and Nanotechnology, November 2010

Shirin Shokoohi, Ahmad Arefazar, Ghasem Naderi, "Nanocomposites based on compatibilized ternary blends of PP/EPDM/PA6 ", International Congress on Nanoscience and Nanotechnology, November 2010

Amir Ebrahimi Jahromi, Ahmad Arefazar, Gholamreza Bakhshandeh, Omid Moeeni Jazani, "Effect of Processing parameters on morphology and mechanical properties of polyamide 6/NBR /Organoclay Ternary Nanocomposites ", International Congress on Nanoscience and Nanotechnology, November 2010

Maryam Roshanali, Hamid Garmabi, Ahmad Arefazar, "Response Surface Based Optimization of Toughness of Hybrid Polyamide 66 Nanocomposites ", 13th Iranian National Chemical Engineering Congress, October 2010

Shirin Shokoohi, Ahmad Arefazar, Ghasem Naderi, "Determination of Twin screw extruder operational condition for pp/epdm/ pa6 ternary polymer blends ", 10th Austrian polymer meeting and 2nd joint austrian- slovenian polymer meeting 2010, October 2010

Shirin Shokoohi, Ahmad Arefazar, Ghasem Naderi, "Effect of processing condition on the formation of PP/EPDM/PA6 Ternary blends in a twin screw extruder ", Polymer processing society 26th annual meeting -pps-26, July 2010

Omid Moeeni Jazani, Ahmad Arefazar, Hassan Jafari, Mohammad Hossein Beheshty, Mohammad Reza Saeb, "Study on the effect of processing conditions on the impact strength of PP/SEBS/PC ternary blends using Taguchi analysis ", The Polymer P ROCESSING Society 26th annual meeting-pps26, July 2010

M Ohammad Ranjbar, Ahmad Arefazar, Gholam Reza Bakhshandeh, "Effect of organoclay and sebs-g-ma content on constituting balance between stiffness vs. toughness in PP/SEBS-g-MA/organoclay nanocomposites ", 3rd conference on nanostructures, March 2010

Ahmad Arefazar, "Recycling of PET bottle wastes by blending with modified styrene butadiene rubber through reactive mixing ", , January 2010

Shirin Shokoohi, Ahmad Arefazar, "Effect of organofunctional inorganic coupling agents on morphology and properties of glass fiber reinforced themoplastics ", , October 2009

Mohammadmahdi Abolhasani, Ahmad Arefazar, Azam Jalali Arani, "Effect of Shell Phase Viscosity on Morphological Properties of Core Shell Blends ", , October 2009

Shirin Shokoohi, Ahmad Arefazar, "Effect of silane modification on the morphology and properties of ABS SGF composites ", , October 2008

Mohammadmahdi Abolhasani, Ahmad Arefazar, "An Investigation on the extended composite droplet morphology of PET PP EVA ternary blends ", , October 2008

Shirin Shokoohi, Ahmad Arefazar, "Effect of silane coupling agents on the melt viscosity of glass fiber reinforced composites ", , October 2008

Soheila Lashgari, Ahmad Arefazar, Omid Moeeni Jazani, "Compatibilization and properties of poly ethylene terephthalate ABS blends based on recycled materials ", , June 2008

Ahmad Arefazar, Omid Moeeni Jazani, "Blends of poly ethylene terephtalate PET with modified polypropylene PP through reactive mixing ", , June 2008

Shirin Shokoohi, Ahmad Arefazar, "ABS/SGF composite and effect of coupling agents on morphology and properties ", , February 2008

Siamak Haji Yakhchali, Ahmad Arefazar, [en-name N/A], S.Hassan Ghodsypour, "Possible criticality of paths in networks with imprecise durations and time lags ", , June 2007

Omid Moeeni Jazani, Ahmad Arefazar, "Toughe bottle wastes by bodified SBR elastomer ", , May 2007

Omid Moeeni Jazani, Ahmad Arefazar, "Study of maleic anhydride melt grafting onto styrene butadiene rubber ", , May 2007

Ahmad Arefazar, "The effect of core - twist hybrid yarn GL / PET on mechanical properties of unsaturated polyester ", , September 2005

Mansoureh Mohseni Garakani, Ahmad Arefazar, "evaluation of mechanical properties and morphology of hybrid composites of PP/SEBS-MA/SGF ", , January 2005

Omid Moeeni Jazani, Ahmad Arefazar, "study of maleic anhydride melt grafting onto styrene-butadiene rubber ", , January 2005

Omid Moeeni Jazani, Ahmad Arefazar, "toughening of PET Bottle wastes by modified SBR elastoner ", , January 2005

Omid Moeeni Jazani, Ahmad Arefazar, "Melt grafting of moleic anhvolriele on to SBR ", , July 2004

Seyd Hadi Hosseiny Bafi, Ahmad Arefazar, "Preparation of conducting acrylic and polyester fibers by polypyrrole, polyaniline and polythiophene Using coating and blending Methods ", , May 2003

Seyd Hadi Hosseiny Bafi, Ahmad Arefazar, "Modification of polypropylene filament by oxidation treatment ", , April 2003

S.Mahmud Kasiriha, Ahmad Arefazar, [en-name N/A], Mortza Ahmady, "the study of corrosion protection properties of two coating systems in persian gulf water ", , November 2000

S.Mahmud Kasiriha, Ahmad Arefazar, [en-name N/A], "study of proerties of bioactive self-polishing copolymers used in marine coatings ", , November 2000

S.Mahmud Kasiriha, Ahmad Arefazar, [en-name N/A], Mortza Ahmady, "study and production of self polishing acrylic antifouling paints containing copper ", , November 2000

Mohammad Reza Firoozmanesh, Ahmad Arefazar, "Adhesion of Textile Reinforcing Materials in rubber Industry ", , March 2000

Ahmad Arefazar, "mechanical properties of randomly oriented glass- fibre reinforced phenolic resins- ", , March 1994

Ahmad Arefazar, [en-name N/A], "Effect of blending sequence o n microstructure of PET/EPDM, EPDM- gMA /ORGANOCLEY ternary hybrid nanocomposites ", ,

[en-name N/A], Ahmad Arefazar,, "Study on the effect of processing condition on the impact strength of PP/PC/SEBS TERNARY BLENDS USING tAguchi experimental analysis ", ,