BIJAN MOLLAEI DARIANI - Amirkabir University of Technology

Special services: Faculty Members Students Graduates

Content

Pepole

Amirkabir University of Technology

Resume Service

BIJAN MOLLAEI DARIANI

Professor
Department of Mechanical Engineering
Construction & Manufacturing

Download PDF فارسی

Email:

dariani

aut.ac.ir

Phone:

h-index (Scopus):

24.00

Citations (Scopus):

1554

Educational Records

Degree/Major

University

City

Country

Graduation Date

B.S

Amirkabir University of Technology

Tehran

Iran

1985

M.S

Amirkabir University of Technology

Tehran

Iran

1987

PhD

Amirkabir University of Technology

Tehran

Iran

1999

Research Interests

Title

Start date

Metal Forming

Sheet Metal Forming & Formability Analysis

Powder Metallurgy

Micro Manufacturing Technology

Press Die Design / Forging Die Design & ...

Jig & Fixture Design

Machine Learning

Additive Manufacturing Technolog / 3D & 4D printing

Reverse Engineering

Supervised PhD Theses

Thesis title

Date

Numerical and experimental analysis of the effect if polymeric nanofibers on the reduction of damages occurred during punching process of glass/ epoxy composite laminates improving the residual strength of punched samples.

ALI GHOLIZADEH

2025 Feb

Supervised MSc Theses

Thesis title

Date

Simulation and Die Design Microforming of Connecting button-shaped Parts Related to ECG Machine

SAMIRA PERIM DARYANI

2024 Sep

Manufacturing The Rapid Prototyping Dies for Deep Drawing of Aluminum Application by FDM 3D-Printer

MAHDI LOTFI

2024 Feb

Investigating the Effective Parameters in the Spring Back of Three Layers Sheet Steel/polymer/Steel in the Incremental Sheet Hydroforming

MILAD BAHRAMIAN

2024 Feb

Investigation of failure and effective parameters on it in the process of incremental forming of hole-flanging bilayer sheet

MOHAMMAD EMAMI & ALIREZA FALLAHI AREZODAR

2024 Feb

Determining the appropriate parameters in the design of Alvator bucket with the aim of increasing the transmission capacity

ZOHREH POURHAMZEH

2023 Oct

numerical and experimental investigation of incremental hydro-forming of steel/polymer/steel sandwich sheets for achieving on high forming angle

REZA ZAMANI

2023 Oct

Investigation two-point incremental forming of sandwich sheets with partial die

MORTEZA YAHYAZADEH

2023 Jul

Numerical and experimental study of spring back on Incremental single-point hydroforming process of sheets

SEYEDFARZAD NADERI

2022 Oct

Investigation of residual stresses in friction stir welding of aluminum 6063 pipes

HADI HASANNEZHAD

2022 May

Numerical and experimental investigation of Incremental Sheet Hydro-Forming for achiving on high forming angle

NAHAL TABRIZI MIANDOAB

2022 Mar

Analysis and optimization of the parameters of the hydroforming process and creation of dent in high strength steel tube

AMIR MOHAMMAD ZEINALYAN & DR. FARID REZA BIGLARI

2022 Feb

Design and analysis of an automatic power plant bearing fabrication device by Babbitt casting

ALIREZA BAHMANI

2021 Sep

analysis and optimization of flow forming process parameters of high-strength steel tube

NAVIDREZA PAHLEVANI

2020 Oct

Evaluation of formability and forming analysis of thick Ti-6Al-4V titanium alloy sheets at various temperatures

KAVEH ALIZADEH

2020 Aug

Effect of residual stresses on the fracture toughness of titanium alloy

POUYA MOHAMMAD OLFAT & IRAJ SATTARI FAR

2020 May

Fracture toughness prediction of ferritic steels in the transition region in the presence of residual stresses

MORTEZA SHAHI & IRAJ SATTARI FAR

2019 Dec

Investigation on formability and analysis of forming of turbine compartment fabricated from Inconel alloy 617 thick sheets

MOHAMMAD JAVAD SADEGHI

2019 Sep

formability study of dissimilar tailor welded blanks (TWB) produced by friction stir welding (FSW)

MOHAMMAD AMIN SADEGHI

2019 Jun

Numerical and experimental investigation of micro upsetting process

MOSTAFA KARDAN HALVAEI

2019 May

Numerical and experimental alanalysis of stress-strain distribution and mechanical properties in precision forging process of a spur gear

ALI ROGHANI ARVAJEH

2018 Jul

Experimental investigation and numerical analysis of the effect of variable blank holder force in stamping die for rectangular sheet metal parts with variable depth

MOHSEN AJAM & BEHROOZ AREZOO

2018 Jul

Parameter study of springback in sheet metal stretching by hemispherical punch using homogeneous anisotropic hardening model

HAMED ABDOLLAHI

2018 May

Experimental investigation and finite element simulation of heat distribution in heat assisted turning

EHSAN FEYZABADI & MOHAMMAD REZA RAZFAR

2018 Feb

Comparison and study on formability and mechanical properties of dissimilar welding between316 stainless steel and st37 steel in two ways TIG and FSW

VAHID KARAMI

2018 Feb

exprimental and numerical investigation of micro-extrusion of pins based on crystal plasticty theorem

MORTEZA ALIZAD KAMRAN

2017 Oct

Theoretical and numerical analysis of asymmetrical rolling process of two - layer sheets

BEHNAM KALHOR

2017 Feb

Investigation on the earing in two layer metals sheets deep drawing process

PEJMAN KHALEDIAN

2017 Jan

Fault detection in servo-hydraulic systems using artificial neural networks

SIAVASH SHARIFI & S.MEHDI REZAEI

2016 Feb

Failure analysis of hydromechanical deep drawing of sandwich panels

MAJID FAZLOLLAHI

2016 Feb

Evaluation of distortion in friction stir welding (FSW) of stiffened aluminum sheets

SAJAD SHEIKHAN

2016 Feb

An experimental and numerical investigation on the influence of residual gas on laminar flame speed of natural gas and gas gasoline fuel mixture

MOHSEN MOHSENIRAD & MEHDI AKHLAGHI

2015 Dec

Analysis of springback in fiber metal laminates in bending process

MILAD HOSSEINPOOR & MOJTABA SADIGHI

2015 Oct

Cutting of tungsten carbide by CBN tools

ABDOLMOHAMMAD HAJIESFANDIARI & MOHAMMAD REZA RAZFAR

2015 Aug

Analysis of Springback In Bending Process Of Sandwich Sheet

MOHSEN YAZDI

2015 Jul

Optimizing of grinding parameters for engineering advanced ceramic materials with Minimum Quantity Lubrication (MQL) technique

SEYED MEHRAN HASANZADEH & ABDOLREZA RAHIMI

2015 Feb

Investigation on Influence of MQL Parameters in Grinding and Their Optimization

AMIR SABERI NOBAKHT & ABDOLREZA RAHIMI

2015 Feb

Influence of effective parameters on the strength of electro-magnetically produced jonits

MOHAMMAD ZARE ZARDEINI & MEHDI AKHLAGHI

2015 Feb

Numerical and exprimental analysis of distortion in friction stir welding (FSW) of aluminium sheets

AKBAR ZARINI

2014 Oct

Study and determination of the maximum size of weld undercut defect according to standard and fracture mechanic calculation in an aluminum part

FARSHID JALALI MOGHADAS & IRAJ SATTARI FAR

2014 Sep

evaluation of Mechanical and formability properties of st14 alloys welded by friction stir welding(FSW)

2014 Feb

Analysis of Multi-point Forming and Evaluation of Effective Parameters

PAYAM NOURBAKHSH JAFARY DEHKORDY

2014 Feb

Analysis of two- point incremental forming and study of effective parameters effects

HOSSEIN SEDAGHAT

2013 Oct

Effect of spot welding parameters on mechanical strength and distribution of residual stress in spot welded plates.

ALI AZIZI

2013 Sep

analysis and parameter study on the ECAR process

ALIREZA MOSLEM POR

2013 Feb

Experimental investigation and numerical analysis of incremental forming in two layer sheet metals

ALI ZAHEDI DIZAJ YEKAN

2013 Feb

Influence of ECAR processing and temperature on the microstructure and tensile properties of Al alloy

REZA NEMATI CHARI

2013 Feb

Study of Rheological Behavior of A356 Aluminum Alloy in Semi-Solid State

AMIN JABBARI GULLIJA

2012 Sep

analysis and measurement of surface residual stress in a cylinder which is produced by flow forming process

REZA MARDANSHAHI & IRAJ SATTARI FAR

2012 Feb

Analysis of SPIF (Single Point Incremental Forming) process and parameter study on springback

2012 Feb

Formability evaluation of friction stir welded TWB on the aluminum alloy sheets

MORTEZA GHAFARPOUR

2011 Nov

Analysis of the effective parameters of the backward extrusion process

2011 Oct

An investigation into ECAE process and corresponding effects on materials behavior

2011 Sep

Extrusion Parameters Optimization Using Genetic Algorithm

FATAANE KOOYAKHI NEJAD CHOKAMI

2011 Jun

Optimising the parameters of rectangular deep drawing with genetic algorithm

2011 Mar

Analysis of Tailor-Welded Blanks deep drawing process

MOHAMMAD HOSSEIN ASADIAN ARDAKANI

2010 Aug

Investigation of Tube Push Bending and optimization of effective parameters using Genetic Algorithm

ABDOLVAHED KAMI

2010 Jul

Analysis of the hydromechanical deep drawing process of two-layer sheet metals

SAEED BAGHERZADEH

2010 Feb

Wrinkling analysis of multilayer sheet metal in deep drawing process

MOHAMMADREZA MOROVVATI

2009 Feb

Cladding of sheet metal using cold rolling process

HAMID MALEKI

2009 Jan

Analysis of cold roll forming of channel section

FARZAM FATHOLAHI RAD

2009 Jan

Springback in bending of bimetal Strips

HAMED ADIBI

2008 Sep

THEORETICAL AND EXPERIMENTAL INVESTIGATION OF METAL TUBES EXPLOSIVE FORMING

SIAMAK GHADAMI BADRLOO

2008 May

FEASIBILITY STUDY ON THE MANUFACTURING OF EXHAUST MANIFOLD BY SHEET METAL FORMING PROCESS

ALIREZA MAHDIEH NAJAFABADI

2008 May

WRINKLING ANALYSIS OF CYLINDRICAL DEEP-DRAWN PARTS BY DR

BEHROOZ ABAZARI & ALIREZA FALLAHI AREZODAR

2007 Dec

INVESTIGATION OF DEEP DRAWING PROCESS AND OPTIMIZATION OF EFFECTIVE PARAMETERS WITH GA

PEYMAN MASHHADI KESHTIBAN

2007 Oct

INVESTIGATION OF TWBS FORMABILITY & ANALYSIS OF FORMING

SEYED REZA HAMZEHLOO

2007 Jan

THEORETICAL & EXPERIMENTAL ANALYSIS OF PROFILE AND TUBE SECTION BENDING

AMIR TORABI DELIGANI

2006 Oct

Optimal design of heterogeneous mesh structures using finite element simulation in additive manufacturing process

MILAD MORSHEDI

2026 May

Numerical and experimental investigation of spring back in the micro-bending process

SAJJAD AGHBASHLOO

2025 Sep

Investigating the mechanical properties of thermosetting plastic parts 3d printed on a plastic composite substrate

MOHAMMAD HADI ZAHMATKESHAN & DR. FARID REZA BIGLARI

2025 Sep

Investigating of process parameters of ultrasonic shot peening treatment on the workpiece fatigue life

SEYED AMIRMAHDI MOHAMMADI HARIKANDE & MOHAMMAD REZA RAZFAR

2025 Sep

Analysis of residual stresses in the traditional and hydro-mechanical deep drawing processes

MOHAMMAD FADAKAR

2025 Sep

Investigation on effects of effective parameters considering residual stresses in 3D printing laser cladding

MOHAMMAD ZARE & IRAJ SATTARI FAR

2025 Sep

Investigating the quality of FSW on polymeric materials (polyethylene and polycarbonate)

SEYED MOHMMAD ALI GHARAVY NAKHJAVANI

2025 Apr

Journal Papers

GHOLIZADEH ALI ، NIKBAKHT ALI ، MOLLAEI DARIANI BIJAN ، Yazdani Mojtaba, "Investigating the effect of punch cutting edge and punching velocity on the interlaminar properties of hole punching of glass/epoxy composite laminates modified with Nylon 6.6 nanofiber mats", International Journal of Advanced Manufacturing Technology, 2025 Nov vol. 141, no. , pp.1501-1522, 2025.

ALIZAD KAMRAN MORTEZA ، MOLLAEI DARIANI BIJAN, "Hierarchical multiscale approach in the prediction of forming limits diagram", Archives of Civil and Mechanical Engineering, 2025 Apr vol. 25, no. 0, pp.1-24, 2025.

EMAMI MOHAMMAD ، Mohammadreza Morovvati ، MOLLAEI DARIANI BIJAN ، FALLAHI AREZODAR ALIREZA, "Investigation of the formability of Al 1050/DC01 bi-layer sheet in incremental hole-flanging : Experimental and numerical simulation", European Journal of Mechanics A-Solids, 2025 Jan vol. 111, no. 0, pp.1-20, 2025.

GHOLIZADEH ALI ، NIKBAKHT ALI ، MOLLAEI DARIANI BIJAN, "Investigating the effect of Nylon 6.6 electrospun nanofiber mats and punch-Die clearance on the damaged area and residual strength of punched glass/epoxy composite laminates", Polymer Composites, 2024 Aug vol. 0, no. 0, pp.1-17, 2024.

، MOLLAEI DARIANI BIJAN ، NIAZI ANGILI SAJAD ، Davood Toghraei, "The effects of single-walled carbon nanotubes dispersion and agglomeration in aluminum matrix: Fabrication and finite element simulation", Measurement, 2023 Jun vol. 218, no. 0, pp.1-14, 2023.

، MOLLAEI DARIANI BIJAN ، A. Lalehpour ، D. Toghraie, "Fabrication and finite element simulation of aluminum/carbon nanotubes sheet reinforced with Thermal Chemical Vapor Deposition (TCVD)", Journal of Materials Research and Technology-Jmr and T, 2023 Jan vol. 23, no. 0, pp.1887-1902, 2023.

ALIZAD KAMRAN MORTEZA ، MOLLAEI DARIANI BIJAN, "Accuracy improvement of FLD prediction for anisotropic sheet metals using BBC 2008 advanced yield criterion", Journal of The Brazilian Society of Mechanical Sciences and Engineering, 2022 Sep vol. 44, no. 478, pp.1-16, 2022.

KARAMI VAHID ، MOLLAEI DARIANI BIJAN ، R. Hashemi, "Investigation of forming limit curves and mechanical properties of 316 stainless steel/St37 steel tailor-welded blanks produced by tungsten inert gas and friction stir welding method", Cirp Journal of Manufacturing Science and Technology, 2021 Feb vol. 32, no. 0, pp.437-446, 2021.

SAEEDI MOHAMMADREZA ، ، MOLLAEI DARIANI BIJAN, "Experimental and numerical investigation of impact resistance of aluminum-copper cladded sheets using an energy-based damage model", Journal of The Brazilian Society of Mechanical Sciences and Engineering, 2020 May vol. 42, no. 0, pp.310-320, 2020.

ZAHEDI DIZAJ YEKAN ALI ، MOLLAEI DARIANI BIJAN ، Mohammad Javad Mirnia, "Failure analysis in single-point incremental forming of bilayer sheet using the ductile fracture criterion", Modares Mechanical Engineering, 2020 May vol. 20, no. 6, pp.1543-1554, 2020.

MOLLAEI DARIANI BIJAN ، GHADAMI BADRLOO SIAMAK, "Analytical and numerical modeling of high-strain rate metal -tube forming", International Journal of Advanced Manufacturing Technology, 2019 May vol. 103, no. 0, pp.4147-4160, 2019.

ZAHEDI DIZAJ YEKAN ALI ، MOLLAEI DARIANI BIJAN ، Mohammad Javad Mirnia, "Experimental determination and numerical prediction of necking and fracture forming limit curves of laminated Al/Cu sheets using a damage plasticity model", International Journal of Mechanical Sciences, 2019 Feb vol. 153-154, no. 0, pp.341-358, 2019.

FARAHANI SAEED ، FALLAHI AREZODAR ALIREZA ، MOLLAEI DARIANI BIJAN ، Srikanth Pilla, "An analytical model for non-hydrostatic sheet metal bulging process by means of polymer melt pressure.", Journal of Manufacturing Science and Engineering-Transactions of The Asme, 2018 Sep vol. 140, no. 0, pp.1-15, 2018.

RAZANI NABI ALLAH ، MOLLAEI DARIANI BIJAN ، Mahdi Soltanpour, "Microstructure and mechanical property improvement of X70 in asymmetrical thermomechanical rolling", International Journal of Advanced Manufacturing Technology, 2018 Jun vol. 97, no. 9, pp.3981-3997, 2018.

SHARIFI SIAVASH ، TIVAY ALI ، REZAEI S.MEHDI ، ZAREINEJAD MOHAMMAD ، MOLLAEI DARIANI BIJAN, "Leakage fault detection in Electro-Hydraulic Servo Systems using a nonlinear representation learning approach", Isa Transactions, 2018 Jan vol. 73, no. 0, pp.154-164, 2018.

MOROVVATI MOHAMMAD REZA ، MOLLAEI DARIANI BIJAN, "The formability investigation of CNT-reinforced aluminum Nano- Composite sheets manufactured by accumulative roll bonding", International Journal of Advanced Manufacturing Technology, 2017 Oct vol. 95, no. 9, pp.3523-3533, 2017.

KAMI ABDOLVAHED ، MOLLAEI DARIANI BIJAN ، Dan-Sorin Comsa ، Dorel Banabic ، SADOUGH VANINI Seyed.Ali ، Mathias Liewald, "An Experimental Study on the Formability of a Vibration Damping Sandwich Sheet (Bondal)", Proceedings of The Romanian Academy Series A-Mathematics Physics Technical Sciences Information Science, 2017 Sep vol. 18, no. 2, pp.281-290, 2017.

ZAHEDI DIZAJ YEKAN ALI ، MOLLAEI DARIANI BIJAN ، Mohammad Javad Mirnia, "Experimental Determination and Numerical Prediction of Necking and Fracture Forming Limit Curves of 2024 Aluminum Alloy Sheet Using Damage Criterion", , 2017 Sep vol. 17, no. 9, pp.361-371, 2017.

MOROVVATI MOHAMMAD REZA ، MOLLAEI DARIANI BIJAN, "The effect of annealing on the formability of aluminum 1200 after accumulative roll bonding", Journal of Manufacturing Processes, 2017 Sep vol. 30, no. 0, pp.241-254, 2017.

RAZANI NABI ALLAH ، MOLLAEI DARIANI BIJAN ، M.Soltanpour, "Analytical approach of asymmetrical thermomechanical rolling by slab method", International Journal of Advanced Manufacturing Technology, 2017 Aug vol. 93, no. 5, pp.1-15, 2017.

Mohammad Hossein Asadian-Ardakan ، MOROVVATI MOHAMMAD REZA ، Mohammad Javad Mirnia ، MOLLAEI DARIANI BIJAN, "Theoretical and experimental investigation of deep drawing of tailor-welded IF steel blanks with non-uniform blank holder forces", Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 2017 Jan vol. 23, no. 2, pp.286-300, 2017.

NEMATI CHARI REZA ، MOLLAEI DARIANI BIJAN ، FALLAHI AREZODAR ALIREZA, "Numerical and experimental studies on deformation behavior of 5083 aluminum alloy strips in equal channel angular rolling", Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 2016 Jun vol. 0, no. 0, pp.1-13, 2016.

S.Bagherzadeh ، M.J. Mirnia ، MOLLAEI DARIANI BIJAN, "Numerical and Experimental Investigations of hydro-mechanical deep drawing process of Laminated aluminum / Steel Sheets", Journal of Manufacturing Processes, 2016 Mar vol. 18, no. 0, pp.131-140, 2016.

FATEMI AFSHIN ، MOLLAEI DARIANI BIJAN, "A modified Marciniak-Kuczynski formability prediction model and experimental evaluation of isotropic sheet subjected to non-planar stress state", Caspian Journal of Applied Sciences Research, 2015 Dec vol. 4, no. 10, pp.42-55, 2015.

BALOO MAHDI ، MOLLAEI DARIANI BIJAN ، AKHLAGHI MEHDI ، AGHA MIRSALIM S.MOSTAFA, "Effects of pressure and temperature on laminar burning velocity and flame instability of iso-octane/methane fuel blend", Fuel, 2015 Dec vol. 170, no. 0, pp.235-244, 2015.

M. Mohsenirad ، MOLLAEI DARIANI BIJAN ، AKHLAGHI MEHDI ، M. Baloo, "An experimental investigation of the influence of diluent gas on laminar flame speed of natural gas and gasoline fuel mixture", , 2015 Sep vol. 40, no. 0, pp.47-57, 2015.

FATEMI AFSHIN ، MOLLAEI DARIANI BIJAN, "The effect of normal and through thickness shear stresses on the formability of isotropic sheet metals", Journal of The Brazilian Society of Mechanical Sciences and Engineering, 2015 Sep vol. 0, no. 0, pp.1-13, 2015.

KAMI ABDOLVAHED ، MOLLAEI DARIANI BIJAN ، SADOUGH VANINI Seyed.Ali ، Dan Sorin Comsa ، Dorel Banabic, "Prediction of the forming limit curves using GTN damage model", Romanian Journal of Technical Sciences-Applied Mechanics, 2015 Jun vol. 59, no. 3, pp.24-35, 2015.

MOLLAEI DARIANI BIJAN ، BALOO MAHDI ، AKHLAGHI MEHDI ، Iman Chitsaz, "Effect of iso-octane/methane blend on laminar burning velocity and ?ame instability", Fuel, 2015 Mar vol. 144, no. 0, pp.264-273, 2015.

FATEMI AFSHIN ، MOLLAEI DARIANI BIJAN, "Forming limit prediction of anisotropic material subjected to normal and through thickness shear stresses using a modified M-K model", International Journal of Advanced Manufacturing Technology, 2015 Mar vol. 0, no. 0, pp.1-15, 2015.

M. Javad Mirnia ، MOLLAEI DARIANI BIJAN, "An investigation on multistage incremental forming to control thining in a truncatedcone of an aluminum alloy sheet", , 2015 Feb vol. 14, no. 14, pp.262-270, 2015.

ZAHEDI DIZAJ YEKAN ALI ، MOLLAEI DARIANI BIJAN ، MOROVVATI MOHAMMAD REZA, "Numerical and experimental investigation of single point incremental forming of two layer sheet metals", , 2015 Feb vol. 14, no. 14, pp.1-8, 2015.

، masoud maleki ، MOLLAEI DARIANI BIJAN, "On the effect of eccentricity in precision forging process", Upb Scientific Bulletin, Series D: Mechanical Engineering, 2015 Feb vol. 76, no. 1, pp.123-138, 2015.

BALOO MAHDI ، MOLLAEI DARIANI BIJAN ، AKHLAGHI MEHDI ، Iman Chitsaz, "Effect of iso-octane/methane blend on laminar burning velocity and flame instability", Fuel, 2014 Dec vol. 144, no. 0, pp.264-273, 2014.

KAMI ABDOLVAHED ، MOLLAEI DARIANI BIJAN ، SADOUGH VANINI Seyed.Ali ، Dan-Sorin Comsa ، Dorel Banabic, "Numerical determination of the forming limit curves of anisotropic sheet metals using GTN damage model", Journal of Materials Processing Technology, 2014 Oct vol. 216, no. 0, pp.472-483, 2014.

NEMATI CHARI REZA ، KAMI ABDOLVAHED ، MOLLAEI DARIANI BIJAN, "Modeling and optimization of equivalent plastic strain in equal-channel angular rolling using response surface methodology", Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 2014 Jul vol. 0, no. 0, pp.1-13, 2014.

KAMI ABDOLVAHED ، MOLLAEI DARIANI BIJAN ، SADOUGH VANINI Seyed.Ali ، Dan-Sorin COMSA ، Dorel Banabic, "APPLICATION OF A GTN DAMAGE MODEL TO PREDICT THE FRACTURE OF METALLIC SHEETS SUBJECTED TO DEEP-DRAWING", Proceedings of The Romanian Academy Series A-Mathematics Physics Technical Sciences Information Science, 2014 Apr vol. 15, no. 0, , 2014.

MOLLAEI DARIANI BIJAN ، BALOO MAHDI ، AKHLAGHI MEHDI ، Iman Chitsaz, "investigation of effect of adding natural gas on gasoline flame speed", , 2014 Mar vol. 32, no. 32, pp.49-57, 2014.

SAFFAR SABER ، MALAKI MASSAUD ، MOLLAEI DARIANI BIJAN, "On the effect of eccentricity in precision forging process", Upb Scientific Bulletin, Series D: Mechanical Engineering, 2014 Feb vol. 76, no. 1, pp.123-138, 2014.

RAZANI NABI ALLAH ، Abdolhossein Jalali Aghchai ، MOLLAEI DARIANI BIJAN, "Flow-forming optimization based on hardness flow-formed AISI321 tube using response surface method", International Journal of Advanced Manufacturing Technology, 2014 Jan vol. 70, no. 0, pp.1436-1471, 2014.

MIRNIA HARIKANDEHI SEYED MOHAMMAD JAVAD ، MOLLAEI DARIANI BIJAN ، H. Vanhove ، J. R. Duflou, "Thickness improvement in single point incremental forming deduced by sequential limit analysis", International Journal of Advanced Manufacturing Technology, 2013 Nov vol. 0, no. 0, , 2013.

SAFFAR SABER ، MOLLAEI DARIANI BIJAN ، MALAKI MASSAUD, "Numerical and experimental study on the effect of die shape and billet size in the forging process of axi-symmetric parts", International Journal of Manufacturing Research, 2013 Aug vol. 8, no. 3, pp.262-276, 2013.

MIRNIA HARIKANDEHI SEYED MOHAMMAD JAVAD ، MOLLAEI DARIANI BIJAN ، H.Vanhove ، J.R. Doflou, "An investigation into thickness distribution in single point incremental forming using sequential limit analysis", International Journal of Material Forming, 2013 Aug vol. 0, no. 0, , 2013.

GHAFARPOUR MORTEZA ، Sina Kolahgar ، MOLLAEI DARIANI BIJAN ، DEHGHANI KAMRAN, "Evaluation of Dissimilar Welds of 5083-H12 and 6061-T6 Produced by Friction Stir Welding", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2013 Apr vol. 0, no. 0, , 2013.

، MOLLAEI DARIANI BIJAN ، masoud maleki, "Numerical and Experimental Study on the Effect of Die Shape and Billet Size in the Forging Process of Axi-Symmetric Parts", International Journal of Manufacturing Research, 2013 Feb vol. 8, no. 3, pp.262-276, 2013.

GHAFARPOUR MORTEZA ، MOLLAEI DARIANI BIJAN ، Amir Hossein Kokabi ، Nabi Allah Razani, "Friction stir welding parameters optimization of heterogeneous tailored welded blank sheets of aluminium alloys 6061 and 5083 using response methodology", Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 2012 Dec vol. 226, no. 12, pp.2013-2022, 2012.

Abdolhossein Jalali Aghchai ، Nabi Allah Razani ، MOLLAEI DARIANI BIJAN, "Flow forming optimization based on diametral growth using finite element method and response surface methodology", Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 2012 Nov vol. 226, no. 12, pp.2002-2012, 2012.

MALEKI HAMID ، Saeed Bagherzadeh ، MOLLAEI DARIANI BIJAN ، Karen Abrinia, "Analysis of Bonding Behavior and Critical Reduction of Two-Layer Strips in Clad Cold Rolling Process", Journal of Materials Engineering and Performance, 2012 Aug vol. 1, no. 1, pp.1-11, 2012.

A. Jalali Aghchai ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Influences of material properties of components on formability of two-layer metalic sheets", International Journal of Advanced Manufacturing Technology, 2012 Jul vol. 24, no. 10, pp.1-16, 2012.

MIRNIA HARIKANDEHI SEYED MOHAMMAD JAVAD ، MOLLAEI DARIANI BIJAN, "Analysis of incremental sheet metal forming using the upper-bound approach", Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 2012 May vol. 0, no. 0, pp.1-12, 2012.

Saeed Bagherzadeh ، MOLLAEI DARIANI BIJAN ، K. Malekzadeh, "Theoretical study on hydro-mechanical deep drawing process of bimetallic sheets and experimental observations", Journal of Materials Processing Technology, 2012 Apr vol. 212, no. 212, pp.1840-1849, 2012.

MIRNIA HARIKANDEHI SEYED MOHAMMAD JAVAD ، MOLLAEI DARIANI BIJAN, "An upper-bound prediction of tangential force in Single Point Incremental Forming", Key Engineering Materials, 2012 Feb vol. 504-506, no. 0, pp.833-838, 2012.

ESKANDARI SINA ، MOLLAEI DARIANI BIJAN, "Finite Element Analysis of Formability of Metallic Sheets in High-Velocity Forming Processes", Applied Mechanics and Materials, 2012 Jan vol. 116-110, no. 110, pp.1431-1436, 2012.

KAMI ABDOLVAHED ، MOLLAEI DARIANI BIJAN, "Prediction of wrinkling in thin-walled tube push-bending process using artificial neural network and finite element method", Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 2011 Oct vol. 225, no. 10, pp.1801-1812, 2011.

nabiollah razani ، A. Jalali Aghchai ، MOLLAEI DARIANI BIJAN, "Experimental study on flow forming process of AISI 321 steel tube using the Taguchi method", Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 2011 Sep vol. 225, no. 9, pp.2024-2031, 2011.

MOROVVATI MOHAMMADREZA ، MOLLAEI DARIANI BIJAN ، HADDADZADE BAHABADI MOHAMMAD, "Initial Blank Optimization in Multilayer Deep Drawing Process Using GONNS", Journal of Manufacturing Science and Engineering-Transactions of The Asme, 2010 Dec vol. 132, no. 6, , 2010.

MOROVVATI MOHAMMADREZA ، MOLLAEI DARIANI BIJAN ، ASADIAN ARDAKANI MOHAMMAD HOSSEIN, "A theoretical, numerical, and experimental investigation of plastic wrinkling of circular two-layer sheet metal in the deep drawing", Journal of Materials Processing Technology, 2010 Oct vol. 210, no. 13, , 2010.

BEHROOZI ARASH ، MOLLAEI DARIANI BIJAN ، SHAKERI MAHMOUD, "Tool shape design in V-bending and channel forming processes by inverse analysis of springback", Inverse Problems In Science and Engineering, 2010 Mar vol. 0, no. 0, , 2010.

BEHROOZI ARASH ، MOLLAEI DARIANI BIJAN ، SHAKERI MAHMOUD, "Die Shape Design in Channel Forming Process by Compensation of Springback Error", Mejlesi Journal of Mechanical Engineering, 2010 Feb vol. 3, no. 2, , 2010.

FATEMI AFSHIN ، BIGLARI DR. FARID REZA ، NOGHABI MOHAMMAD ، MOLLAEI DARIANI BIJAN, "Analytical and numerical study of the effect of the parting line position and shape in the forging process of parts with different shapes", Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 2010 Jan vol. 224, no. 1, , 2010.

FATEMI AFSHIN ، BIGLARI DR. FARID REZA ، NOGHABI MOHAMMAD ، MOLLAEI DARIANI BIJAN, "An Analytical,Numerical,and Experimental Study of The Effect of the Parting Line Position in the Forging Process of Axisymmetric Parts With Middle Elements on One Side", , 2009 Oct vol. , no. 223, , 2009.

MOLLAEI DARIANI BIJAN ، ، GERDOOEE MAHDI, "Experimental investigation of sheet metal formability under various strain rates", , 2009 Jun vol. , no. 223, , 2009.

LEXIAN HOSEIN ، MOLLAEI DARIANI BIJAN, "Effect of roller nose radius and release angle on the forming quality of a hot-spinning process using a non-linear finite element shell analysis", , 2009 Jun vol. , no. 223, , 2009.

BEHROOZI ARASH ، MOLLAEI DARIANI BIJAN ، SHAKERI MAHMOUD, "Tool Shape Design in the Sheet Bending Process by Inverse Analysis of Springback", , 2009 Apr vol. , no. 223, , 2009.

LEXIAN HOSEIN ، MOLLAEI DARIANI BIJAN, "A Analytical Contact Model for Finite Element Analysis of Tube Spinning Process", , 2008 Nov vol. , no. 0, , 2008.

GERDOOEE MAHDI ، MOLLAEI DARIANI BIJAN, "Strain-Rate-Dependent Forming Limit Diagrams for Sheet Metals", , 2008 Oct vol. , no. 222, , 2008.

BEHROOZI ARASH ، MOLLAEI DARIANI BIJAN ، SHAKERI MAHMOUD, "A New Approach for Inverse Analysis of Springback in a Sheet-Bending Process", , 2008 Oct vol. , no. 222, , 2008.

JALALI AGHCHAI ABDOL HOSSEIN ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Theoritical and Experimental Formability Study of Two-Layer Metallic Sheet (Al1100/St12)", , 2008 Sep vol. , no. 222, , 2008.

FAZLI ALI ، MOLLAEI DARIANI BIJAN, "Parameter Study of The Axisymmetric Hydromechanical Deep Drawing Process", , 2006 Sep vol. , no. 220, , 2006.

FAZLI ALI ، MOLLAEI DARIANI BIJAN, "Theoretical and Experimental Analysis of The Axisymmetic Hydromechanical Deep Drawing Process", , 2006 Sep vol. , no. 220, , 2006.

MOLLAEI DARIANI BIJAN ، DAYLAMI AZADI HAMED, "Finding the optimum hill index in the determination of the forming limit diagram", , 2003 Dec vol. , no. , , 2003.

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Effect of grain size and prestraining on the sheet metal formability limits", , 2000 Oct vol. , no. , , 2000.

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Teoretical and experimental analysis of sheet metal formability limits", La Revue Metallurgie, 2000 May vol. 0, no. 0, , 2000.

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Analysis experimengal et theorrique de la limite de formage des toles metalliques", , 2000 Mar vol. 0, no. 0, , 2000.

SHAKERI MAHMOUD ، SADOUGH VANINI Seyed.Ali ، MOLLAEI DARIANI BIJAN, "Optimal blank holder force in the deep drawing process", , 2000 Mar vol. , no. , , 2000.

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Effect of pre-straining and grain size on the limit strains in sheet metal forming", , 2000 Jan vol. , no. , , 2000.

SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Effect of discharge voltage on green strength in electrical dicharge powder compaction", , 1989 Jan vol. 0, no. 12, , 1989.

Conference Papers

ALIZADEH KAVEH ، MOLLAEI DARIANI BIJAN ، Mohammadreza Morovvati, "A Computational Study of Plastic Deformation of Nanoscale Freestanding Thin Films Using an Hyperelastic-Viscoplastic Crystal Plasticity Constitutive Model: Application to the Characterization of NEMS Materials And Devices,", 3rd International Conference on Mechanical, Electrical and Computer Engineering, Feb 2021.

ALIZADEH KAVEH ، Mohammadreza Morovvati ، MOLLAEI DARIANI BIJAN, "Forming limit diagram prediction of thick anisotropic sheet metals at warm conditions using finite element modelling of hemispherical-punch stretch forming,", 3rd International Conference on Mechanical Engineering, Materials and Metallurgy, Jul 2020.

TAGHAVIFARAHI MOHAMMADMAHAN ، MOLLAEI DARIANI BIJAN ، GOUDARZI TAHA, "Design and fabrication of the Carbon fiber composite frame of an urban bicycle,", 28th Annual international Conference of Iranian Society of Mechanical Engineers, May 2020.

ROGHANI ARVAJEH ALI ، BIGLARI DR. FARID REZA ، MOLLAEI DARIANI BIJAN, "Design of forging process preform die with Lagrange interpolation method and pressure comparison on final die between two-stage forging and single stage forging,", ICME2017, Oct 2017.

ZAHEDI DIZAJ YEKAN ALI ، MOLLAEI DARIANI BIJAN ، Mohammad Javad Mirnia, "Analysis of Sheet Metal Deformation in Single Point Incremental Forming,", 25th Annual International Mechanical Engineering Conference, May 2017.

BADAKHSHIAN HAMIDREZA ، Mohammad Soroush Mergani ، MOLLAEI DARIANI BIJAN, "Study of Factors Affecting Wear of Stamping Dies Working with Advanced High Strength Steel Sheets,", 13th Iranian Conference on Manufacturing Engineering (ICME2016), Nov 2016.

BADAKHSHIAN HAMIDREZA ، Mohammad Soroush Mergani ، MOLLAEI DARIANI BIJAN, "Experimental Study and Software Analysis of Galling Wear of Stamping Dies Working with Advanced High Strength Steel Sheets,", 2nd International Conference on New Research Achievements in Mechanics, Industrial & Aerospace Engineering, Sep 2016.

MOHSENIRAD MOHSEN ، MOLLAEI DARIANI BIJAN ، AKHLAGHI MEHDI ، BALOO MAHDI, "An experimental investigation of the influence of diluent gas on laminar flame speed of natural gas and gasoline fuel mixture,", 9th international conference on internal combustion engines & oil, Feb 2016.

BALOO MAHDI ، MOLLAEI DARIANI BIJAN ، AKHLAGHI MEHDI ، AGHA MIRSALIM S.MOSTAFA, "Laminar flame speed correlation for methane-isooctane fuel blend,", 8th international conference on Internal combustion engines and Oil, Feb 2016.

YAZDI MOHSEN ، KAMI ABDOLVAHED ، MOLLAEI DARIANI BIJAN, "Springback analysis in bending of metal/polymer/metal laminates,", 3rd National & 1st International Conference on Applied Researches in Electrical, Mechanical and Mechatronics Engineering, Feb 2016.

NEMATI CHARI REZA ، KAMI ABDOLVAHED ، MOLLAEI DARIANI BIJAN, "Response surface modeling and optimization of equivalent plastic strain in equal channel angular rolling,", Proceedings of Iran International Aluminum Conference (IIAC2014)May 25-26, 2014, Tehran, I.R. Iran, May 2014.

، KAMI ABDOLVAHED ، MOLLAEI DARIANI BIJAN, "parameter optimization in square deep drawing process using Tagochi method,", ISME 2014, Apr 2014.

KAMI ABDOLVAHED ، SADOUGH VANINI Seyed.Ali ، MOLLAEI DARIANI BIJAN, "An Investigation on the Effect of Age Hardening on the Formability of 7075 Aluminum Alloy,", 22nd Annual International Conference on Mechanical Engineering, Apr 2014.

BALOO MAHDI ، MOLLAEI DARIANI BIJAN ، AKHLAGHI MEHDI ، Iman Chitsaz, "Laminar flame speed measurement of natural gas and gasoline blended fuel,", 8th international conference on Internal combustion engines and Oil, Feb 2014.

NEMATI CHARI REZA ، MOLLAEI DARIANI BIJAN ، FALLAHI AREZODAR ALIREZA, "Effect of process parameters on mechanical properties in 5083 Aluminum alloy during ECAR,", 4th international conference on Ultrafine Grained and Nanostructured Materials, Nov 2013.

NEMATI CHARI REZA ، MOLLAEI DARIANI BIJAN ، FALLAHI AREZODAR ALIREZA, "Finite element analysis of deformation behavior in two-dimensional ECAR,", 4th international conference on Ultrafine Grained and Nanostructured Materials, Nov 2013.

JABBARI GULLIJA AMIN ، SADOUGH VANINI Seyed.Ali ، MOLLAEI DARIANI BIJAN, "Rheological Model of Semi-Solid Al-Si Alloy in Thixoforming,", JA2012, Oct 2012.

SADOUGH VANINI Seyed.Ali ، JABBARI GULLIJA AMIN ، MOLLAEI DARIANI BIJAN, "Near Liquidus Rheology of Semi?Solid Al?Si Alloy,", JA2012, Oct 2012.

MOSLEM POR ALIREZA ، MOLLAEI DARIANI BIJAN ، NEMATI CHARI REZA, "Finite Element Modeling of ECAR Process,", International Congress on Nanoscience& Nanotechnology (ICNN2012)8 - 10 September 2012, Kashan, I. R. Iran, Sep 2012.

MOSLEM POR ALIREZA ، NEMATI CHARI REZA ، MOLLAEI DARIANI BIJAN, "An Analytical Approach to the ECAR Process,", International Congress on Nanoscience& Nanotechnology (ICNN2012)8 - 10 September 2012, Kashan, I. R. Iran, Sep 2012.

SAMAREH SALAVATI POUR HADI ، KAMI ABDOLVAHED ، Hamid Khdemhosseni Beheshti ، MOLLAEI DARIANI BIJAN, "Prediction of the roll force in hot rolling process with the artificial neural networks,", 3rd International and 12th National Conference on Manufacturing Engineering, Dec 2011.

، MOLLAEI DARIANI BIJAN, "Numerical study on forming force in incremental sheet metal forming,", rd International and 12th National Conference on Manufacturing Engineering 3, Dec 2011.

، MOLLAEI DARIANI BIJAN, "Simulation of inverse extrusion process and study on forming force effective parameters,", Third International and 12th National Conference on Manufacturing Engineering 3, Dec 2011.

Saeed Bagherzadeh ، MOLLAEI DARIANI BIJAN ، keramat malekzadeh ، Karen Abrinia, "Theoretical and experimental analysis of hydromechanical deep drawing of two metalic laminated sheet,", Third International and 12th National Conference on Manufacturing Engineering, Dec 2011.

MIRNIA HARIKANDEHI SEYED MOHAMMAD JAVAD ، MOLLAEI DARIANI BIJAN, "Upper bound estimation of tangential force in incremental sheet metal forming,", Third International and 12th National Conference on Manufacturing Engineering, Dec 2011.

Hosein Lexian ، MOLLAEI DARIANI BIJAN, "Theoretical analysis for tube rotary forming,", Third International and 12th National Conference on Manufacturing Engineering, Dec 2011.

GHAFARPOUR MORTEZA ، MOLLAEI DARIANI BIJAN ، Amirhosein Kokabi ، Sina Kolahgar, "Study on formability of TWB Al. sheet welded by FSW,", MATFORM,90, Oct 2011.

KAMI ABDOLVAHED ، MOLLAEI DARIANI BIJAN, "Investigation of thin-walled tube deformation in bending with critical bend radius,", 5th Iranian National Conference on Metals and Materials Forming (MATFORM 90), Oct 2011.

MOLLAEI DARIANI BIJAN, "Experimental study on out of roundness of flow- formed AISI 321 steel tube by design of experiment,", Oct 2010.

MOLLAEI DARIANI BIJAN, "Hardness prediction of flow-formed AISI 321 steel tube using response surface method,", Oct 2010.

ADIBI HAMED ، ASADIAN ARDAKANI MOHAMMAD HOSSEIN ، MOLLAEI DARIANI BIJAN ، BIGLARI DR. FARID REZA, "Theoretical Prediction of the Springback of Sheet Metal Laminates after U- Bending,", 2010International conference on manufacturing engineering and engineering management (ICMEEM10, Jun 2010.

ADIBI HAMED ، ASADIAN ARDAKANI MOHAMMAD HOSSEIN ، MOLLAEI DARIANI BIJAN, "Springback Analysis of Sheet Metal Laminates after U-bending,", 19th International Conference on Metallurgy and Materials, May 2010.

MOROVVATI MOHAMMADREZA ، MOLLAEI DARIANI BIJAN, "Blank design by ANN in bimetalic deep drawing,", Oct 2009.

GERDOOEE MAHDI ، MOLLAEI DARIANI BIJAN, "Effect of material models on formability of sheet metals in explosive forming,", Jul 2009.

BEHROOZI ARASH ، MOLLAEI DARIANI BIJAN, "A one step analytical approach for springback compensation in channel forming process,", Jul 2009.

LEXIAN HOSEIN ، MOLLAEI DARIANI BIJAN, "Mesh free non-linear model for high order shell to implicit dynamic analysis with contact analysis Part one: Theory,", ISME2009, May 2009.

LEXIAN HOSEIN ، MOLLAEI DARIANI BIJAN, "Mesh free non-linear model for high order shell to implicit dynamic analysis with contact analysis Part two: procedure & results,", ISME2009, May 2009.

BEHROOZI ARASH ، MOLLAEI DARIANI BIJAN ، SHAKERI MAHMOUD, "Correction of die surface to compensate springback error in sheet forming process by inverse sprinback analysis,", Mar 2009.

SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN ، JALALI AGHCHAI ABDOL HOSSEIN, "Finite element analyis of formability of metallic sheets based on M K model comparing the results with theoretical and experimental ones,", Mar 2009.

JALALI AGHCHAI ABDOL HOSSEIN ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Theoretical and experimental investigation and analysis on formability of all 100 st12 two layer sheet based on equivalient layer model,", Mar 2009.

SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Three dimensional elasticty solution for transversally loaded of simply supported fuctionally graded plates using multi layer method,", Sep 2008.

BEHROOZI ARASH ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Inverse analysis of springback in sheet metal forming by finite element method,", Jun 2008.

MASHHADI KESHTIBAN PEYMAN ، MOLLAEI DARIANI BIJAN ، GHAFFARI TARI DARIUSH, "Prediction of wall thicknes in deep drawing process with neural network,", May 2008.

JALALI AGHCHAI ABDOL HOSSEIN ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Investigation and analysis of formability of AL1100/St12 sheet considering properties of layers separately,", May 2008.

BEHROOZI ARASH ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Inverse analysis of springback in sheet metal forming by finite element method,", 2008 Theory, Computation, and Emerging Applications, Mar 2008.

JALALI AGHCHAI ABDOL HOSSEIN ، ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Experimental study on formability of two layer metallic sheets,", Dec 2007.

MASHHADI KESHTIBAN PEYMAN ، MOLLAEI DARIANI BIJAN ، ZAREI OMID, "Infuence of process parameters on the deep drawing of an axisymmetric workpiece,", Dec 2007.

MAHDIEH NAJAFABADI ALIREZA ، FARZIN MAJID ، MOLLAEI DARIANI BIJAN, "Manufacturing of exhaust manifold by sheet metal forming process,", Dec 2007.

MOLLAEI DARIANI BIJAN ، ، GHADAMI BADRLOO SIAMAK, "Analytical and numerical modeling of explosive tube bulging process,", Dec 2007.

MOLLAEI DARIANI BIJAN ، ، GHADAMI BADRLOO SIAMAK, "Analytical modeling of free tube expansion by explosive forming,", Dec 2007.

MASHHADI KESHTIBAN PEYMAN ، MOLLAEI DARIANI BIJAN ، FARROKHI HAMID, "Sensitivity analysis of a deep drawing process for and axisymmetric workpiece,", Dec 2007.

BEHROOZI ARASH ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Inverse analysis of springback by finite element method,", Dec 2007.

BIGLARI DR. FARID REZA ، AGHAI AHMAD ، NIKFARJAM OMID ، MOLLAEI DARIANI BIJAN, "Comparison of optimum and square blanks using the sensitivity approach,", Jul 2007.

BIGLARI DR. FARID REZA ، AGAHI AMIR ، NIKFARJAM OMID ، MOLLAEI DARIANI BIJAN, "Optimum blank design based on modified sensitivity approach,", Jul 2007.

GHADAMI BADRLOO SIAMAK ، MAHDIEH NAJAFABADI ALIREZA ، MOLLAEI DARIANI BIJAN ، SADOUGH VANINI Seyed.Ali ، HOSSEINI ABARDEH REZA, "Investigation of ultrasonic assisted Upsetting process by FEM method,", Dec 2006.

MOLLAEI DARIANI BIJAN, "investigation of friction effect in limit drawing ratio of hydromechanical deep drawing process,", Mar 2005.

MOLLAEI DARIANI BIJAN, "the effect of die parammeters on the stability of sheet in the deep drawing process,", Sep 2004.

MOLLAEI DARIANI BIJAN ، SADOUGH VANINI Seyed.Ali, "The effect of martensite transformation induced by plastic deformation on the stainless steels formability limits,", Mar 2003.

SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN ، SADOUGH VANINI Seyed.Ali, "Formaing Limit Diagram of metal sheet in actual strain respect to forming process .,", Mar 2001.

SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN ، SADOUGH VANINI Seyed.Ali, "Forming Limit Diagram Of Metal Computational Method,", Mar 2001.

SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN ، SADOUGH VANINI Seyed.Ali, "Forming limit diagram of metal sheet In actual strain path with respect to forming process,", Jan 2001.

SHAKERI MAHMOUD ، SADOUGH VANINI Seyed.Ali ، MOLLAEI DARIANI BIJAN, "Influence of Grain Size and Sheet Thickess on the Low Carbon Steel Sheet Formability Limits,", Oct 1999.

MOLLAEI DARIANI BIJAN ، SHAKERI MAHMOUD ، SADOUGH VANINI Seyed.Ali, "Theoretical study of sheet metal formability (second part),", Feb 1999.

MOLLAEI DARIANI BIJAN ، SHAKERI MAHMOUD ، SADOUGH VANINI Seyed.Ali, "Experimental study of sheet metal formability (first part),", Feb 1999.

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Effect of grain size and prestraining on the sheet metal formalaility limits,", Oct 1998.

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Analysis Experimental ET theorique De formage des toles metalliques .,", Sep 1998.

SHAKERI MAHMOUD ، SADOUGH VANINI Seyed.Ali ، MOLLAEI DARIANI BIJAN, "Theoretical and experimental sensitivity analysis of sheet metal formability Limits .,", Sep 1998.

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Effect of prestraining on forming limit diagrams of low carbon steel,", Jul 1998.

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Influence of grain refining annealing on the low carbon steel formability limits,", Mar 1998.

MOLLAEI DARIANI BIJAN ، SHAKERI MAHMOUD ، SADOUGH VANINI Seyed.Ali, "Technique for determining forming limit diagram in sheet metals formability,", May 1996.

Taught Courses

Course title

Description

Headlines

Date

Probability & Statistics

4051

Press Die. Design

4051

Jig & Fixture Design

4051

Probability & Statistics

4042

Jig & Fixture Design

آشنایی با قید و بندها بعنوان تجهیزات ضروری در تولید قطعات یکسان، انجام طراحی و تهیه نقشه های ساختی قید و بندها

4042

Press Die. Design

آشنایی با انواع روشهای پرسکاری ورق و انواع پرسها ، آموزش محاسبات ، طراحی و ارایه نقشه های ساختی قالبهای برش، خمکاری، فرم و کشش عمیق ورق

4042

Sheet Metal Forming Analysis

آشنایی با روشهای مختلف شکلدهی ورق فلزی و تجزیه و تحلیل این فرایندها ( خمکاری، کشش عمیق ، اتساع ، هیدروفورمینگ و ...) تحلیل عیوب برگشت فنری، چ

4042

Design of Welded Structure

4042

Special Topics (Micro-machining Technology)

4042

Metal Forming Analysis

4041

Press Die. Design

4041

Jig & Fixture Design

4041

Probability & Statistics

4041

Sheet Metal Forming Analysis

4032

Press Die. Design

4032

Jig & Fixture Design

4032

Design of Welded Structure

4032

Probability & Statistics

4032

Inventions/Patents

Invention title

Reg. number

Country

contributers

Reg. date

Exp. date

Design and fabrication of electrode dressing apparatus

013822

2030/03/1