HAMED ADIBI - Amirkabir University of Technology

Supervised PhD Theses

#

Thesis title

By

Date

1

Manufacturing of structured surfaces by Grinding Technology

SEYED HASAN MUSAVI & S.MEHDI REZAEI
Other Supervisor:

2022 Sep

Supervised MSc Theses

#

Thesis title

By

Date

1

Polishing Technique of Biomedical Grade NiTi Wire by MAF Process

ABBAS GHAVAMI

2024 Oct

2

Experimental investigation of magnesium alloy grinding process

MAHDI MAHVI AGHBOLAGH
Other Supervisor: S.MEHDI REZAEI

2024 Jun

3

Study of strength properties of printed concrete piece by additive manufacturing

SHARIF GHOWANCHZADE

2024 Feb

4

Design & manufacturing teeth implant with additive manufacturing methode(3D printing)

MOHAMADALI BAGHERKHANI

2024 Jan

5

Surface roughness improvements of human half jaw made by additive manufacturing

AMIR KIADARBANDSARI
Other Supervisor: S.MEHDI REZAEI

2023 Oct

6

Evaluation and analysis of grinding process of polymer composite parts reinforced by carbon fiber

BABAK TAGHIZADEH

2023 Sep

7

Design and Manufacturing of Construction Builder 3D Printer Nozzle Mechanism

ALI BAHADORI JAHROMI
Other Supervisor: S.MEHDI REZAEI

2023 Sep

8

Developing wooden parts production method based on additive manufacturing

MOHAMMAD DAVOUDI

2023 Jun

9

Experimental and Theoretical study on chemical mechanical polishing of optical glass

MAHDI VALIZADEH

2023 Jun

10

experimental investigation on the High speed milling of Aerospace aluminum alloys 7000 and 2000

AMIR TAGHAVIKARGAR

2023 May

11

experimental study on the surface topography in the PEEK grinding process using cryogenic cooling

ABBAS MOGHADDAM

2022 Oct

12

The effect of chemical treatment on the surface roughness and mechanical properties of 3d-printed parts.

SEYED MOHSEN ZAMIRI

2022 Oct

13

Theoretical Modeling and experimental investigation on the surface roughness of parts using barrel finishing method

MAJID DASHTI MALJAIE
Other Supervisor: S.MEHDI REZAEI

2022 Sep

14

Investigation of impact properties and energy absorption in sandwich panels made by FDM technique

MEHDI HASHEMI

2022 Jul

15

Finite Element Analysis and Experimental Study of FDM Parts Mechanical Properties

SOHEIL SHAKER

2022 Mar

16

Design and analysis of temperature adjustment pilot of automatic Babbitt casting device for power plant journal bearengs

MEHDI ZAREIE
Other Supervisor: Rasul Fesharakifard

2021 Sep

17

Application of the auxiliary wheel cleaning jet in the grinding of nickel based super alloy with Minimum Quantity Lubrication technique

OMID HATAMI FARZANEH
Other Supervisor: S.MEHDI REZAEI

2021 Jul

18

Experimental investigation on the process parameters effects on the mechanical strength of printed parts with poly ether ether ketone (PEEK) material fabricated via FDM process.

AMIR ROUHANI
Other Supervisor: S.MEHDI REZAEI

2021 Feb

19

Experimental investigation on the process parameters effects on the wear behavior of ABS parts fabricated by fused deposition modeling.

MOHAMMADHOSSEIN BAHRAMI

2021 Feb

20

Analytical Modeling of cutting forces in grinding process considering micro mechanism of cutting between grain-work piece

FARZAD JAMAATISOMARIN & ABDOLREZA RAHIMI
Other Supervisor:

2020 Dec

21

Experimental Investigation on the process parameter effects on the mechanical properties of Polymer-Metal composites Printed by FDM

SEYEDMOHAMMADREZA HASHEMI

2020 Jan

22

Improvement of cutting fluid application in grinding process using additional nanoparticles

MAJID NAJAFIMEHR
Other Supervisor: S.MEHDI REZAEI

2019 Oct

23

Analysis and investigation of manufacturing of composite ceramic brake pad and performance evaluation

TOFIGH PALIZBAN
Other Supervisor: S.MEHDI REZAEI

2019 Feb

24

Experimental analysis of Electrophoretic Deposition-Assisted Polishing (EPDAP)

MOHSEN KHANI

2018 Dec

25

Experimental study on the surface integrity and residual stress of nickel base super alloy ball burnishing process

HASHEM SABRI & S.MEHDI REZAEI
Other Supervisor:

2018 Dec

26

Performance improvement of nickel based super alloy grinding by using a structured alumina grinding wheel with and without cooling nitrogen liquid

MISAGH KHALEGHBAGHERI & AMIR ABDULLAH
Other Supervisor:

2018 Feb

27

Ultrasonic-Assisted Grinding of Optical Glass

MOHAMMAD ZAREI & S.MEHDI REZAEI
Other Supervisor:

2018 Feb

28

Experimental investigation and finite element modeling of material removal behavior of optical glass in single grit grinding

AKBAR SOLHTALAB & S.MEHDI REZAEI
Other Supervisor:

2018 Jan

29

An Experimental Study On Chemical-Mechanical Polishing Of Optical Glass

MASOUD MOHAMMADI & S.MEHDI REZAEI
Other Supervisor:

2017 Oct

30

Development of magnetic fluid wheel for flat polishing of optical glass

FERDOWS AHMADY VOSTAKOLAEI & S.MEHDI REZAEI
Other Supervisor:

2017 Sep

31

Analysis of NiTi shape memory alloy grinding process

MALEK MAHMOUDI YAMCHI & S.MEHDI REZAEI
Other Supervisor:

2017 Feb

32

Investigation on grindimg process of ceramic matrix composites

HAMED ESMAEILI & S.MEHDI REZAEI
Other Supervisor:

2017 Feb

33

Experimental evaluation of ultrasonic shot peening process effects on mechanical and metallurgical properties of materials fabricated by selective laser melting (SLM)

OMID EYNOLLAHI

2025 Sep

34

Designing & Manufacturing a Cartesian FDM 3D-Printer with 5 Degrees of Freedom

MOHAMMADHOSSEIN ALINAGHIPOUR
Other Supervisor: S.MEHDI REZAEI

2025 Oct

35

Investigating the effects of the geometry of the inner core of sandwich panels made by the fusion deposition method (FDM) on the properties of impact

ALI AKBARI
Other Supervisor: ABDOLREZA RAHIMI

2025 Mar

36

An experimental study of the effects of multi-infill patterns on the mechanical strength of parts made by fused deposition modeling

AMIRALI NAKHAEI
Other Supervisor: ABDOLREZA RAHIMI

2025 Mar

37

Experimental investigation of the sandblast process effects on the surface roughness and mechanical properties of 3d-printed parts

KATAYOUN GHOZATI

2025 Feb

Books

#

Title

Author(s)

Publisher country

publication date

version

1

additive manufacturing technologies 3D printing, and direct digital manufacturing

A. Akbari, A. Nakhaei, H. Adibi

Iran

0

2

practical centrifugal pumps design , operation and maintenance

S. Khani, H. Adibi

Iran

1

Journal Papers

1

M. Tanoorsaz, M. Alinaghipour, H. Adibi, S. Rezaei, "Additive manufacturing approaches to abrasive machining challenges: a comprehensive review", Progress In Additive Manufacturing, 2026 Aug vol. 1, no. 1, pp.1-19, 2026.

2

H. Safikhanlu, M. Ahmadi Najafabadi, H. Adibi, "Mechanical and acoustic emission assessment of drilled GFRP composites under combined static loading", Engineering Failure Analysis, 2026 May vol. 195, no. 110995, pp.1-27, 2026.

3

M. Alinaghipour, H. Adibi, S. Rezaei, "Advancements in five-axis 3D printing for process and surface enhancement: optimizing cartesian FDM through DOE", Progress In Additive Manufacturing, 2026 Apr vol. , no. 1, pp.1-15, 2026.

4

M. Alinaghipour, H. Adibi, "Surface integrity enhancement of additively manufactured parts using various chemical post-processing techniques and treatment durations", Progress In Additive Manufacturing, 2026 Jan vol. 11, no. , pp.181-203, 2026.

5

A. Kiadarbandsari, Mohammad Vahid Ehteshamfar, H. Adibi, "Ensemble machine learning for predicting surface roughness improvement in chemo-mechanical post-processing of additive manufacturing dental parts", Progress In Additive Manufacturing, 2025 Mar vol. 0, no. , pp.1-15, 2025.

6

B. Taghizadeh, M.V. Ehteshamfar, H. Adibi, "Lapping optimization of additively manufactured ABS-carbon fiber composite parts using the soft computing technique", Polymer Testing, 2023 Oct vol. 128, no. 0, pp.1-14, 2023.

7

M. Bayat, H. Adibi, M. Najafimehr, A. Barzegar, "Investigation of sustainability and performance of Ag?coated CuO cutting fluid in grinding of Inconel 738", International Journal of Advanced Manufacturing Technology, 2023 Aug vol. 128, no. 0, pp.3057-3075, 2023.

8

M. Bahrami, M.V. Ehteshamfar, H. Adibi, "The Effect, Prediction, and Optimization of Fe Particles on Wear Behavior of Fe-ABS Composites Fabricated by Fused Deposition Modeling", Arabian Journal For Science and Engineering, 2023 Jul vol. 0, no. 1, pp.1-16, 2023.

9

H. Adibi, O. Hatami Farzaneh, S. Rezaei, "Effects of minimum quantity lubrication (MQL) on grinding processes using eco-friendly nanofluids: a review", Advances In Materials and Processing Technologies, 2023 Apr vol. 0, no. 0, pp.1-43, 2023.

10

O. Hatami Farzaneh, D. Sayadi, M. Razbin, H. Adibi, "Optimization of Grinding Parameters of Tool Steel by the Soft Computing Technique", Computational Intelligence and Neuroscience, 2022 Dec vol. 2022, no. 304213, pp.1-17, 2022.

11

H. Adibi, A. Moghaddam, O. Hatami Farzaneh, "Application of a Cryogenic Cooling System on the Grinding Operation of Polyether Ether Ketone Biomaterial (PEEK)", Arabian Journal For Science and Engineering, 2022 Nov vol. 0, no. 0, pp.1-15, 2022.

12

M. Javadi, M.V. Ehteshamfar, H. Adibi, "A comprehensive analysis and prediction of the effect of groove shape and volume fraction of multi-walled carbon nanotubes on the polymer 3D-printed parts in the friction stir welding process", Polymer Testing, 2022 Oct vol. 117, no. 0, pp.1-17, 2022.

13

S.H. Musavi, H. Adibi, S. Rezaei, "Manufacturing of durable tribological surface by grinding process", International Journal of Advanced Manufacturing Technology, 2022 Sep vol. 122, no. 7, pp.3393-3410, 2022.

14

S.H. Musavi, H. Adibi, S. Rezaei, "An experimental study on bubble dynamics and pool boiling heat transfer of grinding/laser-structured surface", Heat and Mass Transfer, 2022 Sep vol. 0, no. 0, pp.1-18, 2022.

15

R. Nourizadeh Nesheli, M. Zareinejad, S. Rezaei, H. Adibi, "Modeling of Sound Generation Mechanism During the Turning Process", Modares Mechanical Engineering, 2022 Aug vol. 22, no. 8, pp.529-539, 2022.

16

O. Hatami Farzaneh, H. Adibi, S. Rezaei, "Evaluation of the grinding process utilizing an auxiliary compressed air jet on cleaning the grinding wheel surface", Proceedings of The Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 2022 Jun vol. 0, no. 0, pp.1-13, 2022.

17

S.H. Musavi, H. Adibi, S. Rezaei, "Development of an innovative grinding process for producing functional surfaces", Tribology International, 2022 May vol. 173, no. 0, pp.1-20, 2022.

18

O. Hatami Farzaneh, H. Adibi, S. Rezaei, "Application of a compressed air jet for cleaning of wheel surface in grinding nickel-based super alloy Inconel 718", Cirp Journal of Manufacturing Science and Technology, 2022 May vol. 37, no. 0, pp.233-244, 2022.

19

M. Bayat, H. Adibi, A. Barzegar, S. Rezaei, "Experimental and numerical investigation of heat generation and surface integrity of ZrO2 bioceramics in grinding process under MQL condition", Journal of The Mechanical Behavior of Biomedical Materials, 2022 Apr vol. 131, no. 0, pp.1-16, 2022.

20

A. Barzegar, H. Adibi, Mohammad Javad Pakravan, "The surface and subsurface integrity in coupled operation of fused deposited modeling and centrifugal disk finishing", Rapid Prototyping Journal, 2022 Apr vol. 29, no. 9, pp.1731-1749, 2022.

21

R. Nourizadeh Nesheli, S. Rezaei, M. Zareinejad, H. Adibi, "Comprehensive investigation on sound generation mechanisms during machining for monitoring purpose", International Journal of Advanced Manufacturing Technology, 2022 Mar vol. 121, no. 0, pp.1589-1610, 2022.

22

H. Esmaeili, H. Adibi, Reza Rizvi, S. Rezaei, "Coupled thermo-mechanical analysis and optimization of the grinding process for Inconel 718 superalloy using single grit approach", Tribology International, 2022 Mar vol. 171, no. 0, pp.1-20, 2022.

23

M.V. Ehteshamfar, M. Javadi, H. Adibi, "Surface modification of prototypes in fused deposition modelling using lapping process", Rapid Prototyping Journal, 2022 Mar vol. 0, no. 0, pp.1-12, 2022.

24

H. Adibi, F. Jamaatisomarin, A. Rahimi, "Analytical simulation of grinding forces based on the micro-mechanisms of cutting between grain-workpiece", International Journal of Advanced Manufacturing Technology, 2022 Jan vol. 119, no. 0, pp.4781-4801, 2022.

25

F. Jamaatisomarin, H. Adibi, A. Rahimi, "Analytical Modeling of Cutting Forces in Grinding of AISI 1060 Heat Treated Steel Considering Undeformed Chip Thickness Distribution", Modares Mechanical Engineering, 2021 Sep vol. 21, no. 10, pp.685-692, 2021.

26

S. Hashemi, H. Adibi, "Experimental and Numerical Investigation of Fatigue Behavior of Polylactic acid Components Made by Additive Manufacturing Method", Amirkabir Journal of Mechanical Engineering, 2021 Aug vol. 53, no. 6, pp.3703-3716, 2021.

27

H. Adibi, S. Hashemi, "Experimental study on tensile strength of copper microparticles filled polymer composites printed by fused deposition modelling process", Rapid Prototyping Journal, 2021 Jul vol. 0, no. 0, pp.1-11, 2021.

28

H. Adibi, M. Khani, H. Esmaeili, "Experimental evaluation of electrophoretic deposition-assisted polishing", Proceedings of The Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 2021 May vol. 0, no. 0, pp.1-9, 2021.

29

S. Hashemi, H. Adibi, A. Nazeri Astanjin, "Experimental Analysis of Abrasion Resistance of Acrylonitrile Butadiene Styrene Components Made by Fused Deposition Modelling Using Response Surface Method", Modares Mechanical Engineering, 2021 Mar vol. 21, no. 4, pp.235-245, 2021.

30

H. Esmaeili, H. Adibi, S. Rezaei, "Study on surface integrity and material removal mechanism in eco-friendly grinding of Inconel 718 using numerical and experimental investigations", International Journal of Advanced Manufacturing Technology, 2021 Jan vol. 112, no. 0, pp.1797-1818, 2021.

31

S.J. Aaraj Khodaii, H. Adibi, F. Barazandeh, S. Rezaei, Ahmed A.d. Sarhan, "Investigation of the surface integrity, flexural strength on the grinding of alumina for biomedical applications", Precision Engineering-Journal of The International Societies For Precision Engineering and Nanotechnology, 2020 Sep vol. 67, no. 0, pp.110-122, 2020.

32

S.J. Aaraj Khodaii, H. Adibi, F. Barazandeh, A. Solhtalab, S. Rezaei, Ahmed A.d. Sarhan, "Improvement of surface integrity in the grinding of bioceramic partially stabilized zirconia using analytical, numerical, and experimental methods", Ceramics International, 2020 Jun vol. 46, no. 9, pp.13784-13797, 2020.

33

H. Esmaeili, H. Adibi, S. Rezaei, "Surface Quality, Efficiency and Process Optimization of Grinding Carbon Fiber?Reinforced Silicon Carbide Composite", Modares Mechanical Engineering, 2020 Jun vol. 20, no. 6, pp.1409-1421, 2020.

34

H. Adibi, A. Sorati Ashtiani, A. Rahimi, "In-Process Monitoring of Nickel-Based Super Alloy Grinding Using the Acoustic Emission Method", Russian Journal of Nondestructive Testing, 2020 Feb vol. 55, no. 12, pp.909-917, 2020.

35

S.J. Aaraj Khodaii, F. Barazandeh, S. Rezaei, H. Adibi, Ahmed Sarhan, "Surface integrity and flexural strength improvement in grinding partially stabilized zirconia", Journal of Central South University, 2020 Jan vol. 26, no. 12, pp.3261-3278, 2020.

36

S.J. Aaraj Khodaii, F. Barazandeh, S. Rezaei, H. Adibi, Ahmed Sarhan, "Influence of grinding parameters on phase transformation, surface roughness, and grinding cost of bioceramic partially stabilized zirconia (PSZ) using diamond grinding wheel", International Journal of Advanced Manufacturing Technology, 2019 Nov vol. 105, no. 11, pp.4715-4729, 2019.

37

Ebrahim Yarali, Arman Mohammadi, Sheyda Mafakheri, Mostafa Baghani, H. Adibi, "Mathematical modeling and experimental evaluation of a prototype double?tube Magnetorheological damper", Sn Applied Sciences, 2019 Oct vol. 2019, no. 1, pp.13-41, 2019.

38

A. Solhtalab, H. Adibi, A. Esmaeilzare, S. Rezaei, "Cup wheel grinding-induced subsurface damage in optical glass BK7: An experimental, theoretical and numerical investigation", Precision Engineering-Journal of The International Societies For Precision Engineering and Nanotechnology, 2019 Apr vol. 57, no. 0, pp.162-175, 2019.

39

H. Esmaeili, H. Adibi, S. Rezaei, "An efficient strategy for grinding carbon fiber-reinforced silicon carbide composite using minimum quantity lubricant", Ceramics International, 2019 Mar vol. 45, no. 0, pp.10852-10864, 2019.

40

F. Barazandeh, S.J. Aaraj Khodaii, S. Rezaei, H. Adibi, Ahmed Sarhan, "Investigation of grinding partially stabilized zirconia (PSZ) for dental Implant application", , 2018 May vol. 18, no. 4, pp.951-958, 2018.

41

H. Esmaeili, H. Adibi, S. Rezaei, "Experimental study on grinding forces and specific energy in three different environments of grinding carbon fiber reinforced silicon carbide composite", , 2018 Jan vol. 18, no. 1, pp.379-387, 2018.

42

H. Adibi, H. Esmaeili, S. Rezaei, "Study on minimum quantity lubrication (MQL) in grinding of carbon fiber-reinforced SiC matrix composites (CMCs)", International Journal of Advanced Manufacturing Technology, 2017 Dec vol. 0, no. 0, pp.1-15, 2017.

43

H. Adibi, E. Yarali، رمضان شمس, "Design, fabricate and testing the novel Magnetorheological damper involving stabilizer nanoparticles of silicone", , 2017 Oct vol. 17, no. 8, pp.252-258, 2017.

44

H. Esmaeili, H. Adibi, S. Rezaei, "Modelling and optimization of creep feed grinding parameters for gas turbine blades", , 2015 Nov vol. 15, no. 13, pp.318-322, 2015.

45

A. Esmaeilzare, H. Gholipour, H. Adibi, S. Rezaei, "Surface and Subsurface Damage Measurements in Zerodur Glass-Ceramic Grinding Process and their Correlation with Surface Roughness", , 2015 Nov vol. 15, no. 13, pp.332-337, 2015.

46

H. Adibi, A. Akbari, A. Nakhaei, "Unified experimental and finite element analysis of the mechanical performance of 3D-printed honeycomb and auxetic sandwich cores", Composites Part C: Open Access, 2025 Fall vol. 18, no. 1, pp.1-20, 2025.

Conference Papers

1

A.H. Zarghami, H. Adibi, "A review of parameters affecting the dimensional accuracy of parts produced by FDM.,", The 33rd Annual International Conference on Mechanical Engineering of Iran (ISME2025), May 2025.

2

S. Shaker, H. Adibi, "Realistic finite element simulation of components made with fused deposition modeling Process,", The 18th National Conference and 7th International Conference on Manufacturing Engineering, Mar 2022.

3

S. Hashemi, H. Adibi, "Experimental investigation on the FDM process parameters effect on the mechanical properties of polymer-metal composite,", 28th annual international conference of Iranian society of mechanical engineering, May 2020.

4

S. Hashemi, H. Adibi, "experimental analysis and finite element modeling of mechanical properties of additive manufactured parts,", 28th annual international conference of Iranian society of mechanical engineering, May 2020.

5

M. Khani, H. Adibi, Mohadeseh Goldoust, "experimental investigation of Electrophoretic Deposition Assisted Polishing,", The 28th Annual International Conference of Iranian Society of Mechanical Engineers-ISME2020, May 2020.

6

S. Hashemi, H. Adibi, A. Salimi Beni, "Optimization of process parameters on the mechanical properties of additive manufactured parts,", ICME 2019, Dec 2019.

Taught Courses

#

Course title

Description

Headlines

Date

1

Physics of Metrology Lab.(Mechanical Engineering)

4051

2

Physics of Metrology Lab.(Mechanical Engineering)

4051

3

SURFACE FINISHING TECHNIQUES

4051

4

Fundamentals of Additive Manufacturing technologies

4051

5

Physics of Metrology Lab.(Mechanical Engineering)

4051

6

Physics of Metrology Lab.(Manufacturing Engineering)

4051

7

Physics of Metrology Lab.(Manufacturing Engineering)

4051

8

Physics of Metrology Lab.(Manufacturing Engineering)

4051

9

Additive Manufacturing

4051

10

Quality Control

4042

11

Physics of Metrology Lab.(Manufacturing Engineering)

4042

12

Physics of Metrology Lab.(Manufacturing Engineering)

4042

13

Physics of Metrology Lab.(Manufacturing Engineering)

آشنایی با سیستم های اندازه گیری و تجهیزات مربوطه

4042

14

Physics of Metrology

اموزش روشهای اندازه گیری در مهندسی به دانشجو

4042

15

Physics of Metrology Lab.(Mechanical Engineering)

آشنایی با سیستم های اندازه گیری و تجهیزات مربوطه

4042

16

Physics of Metrology Lab.(Mechanical Engineering)

آشنایی با سیستم های اندازه گیری و تجهیزات مربوطه

4042

17

Physics of Metrology Lab.(Mechanical Engineering)

آشنایی با سیستم های اندازه گیری و تجهیزات مربوطه

4042

18

Grinding Technology

4042

19

Fundamentals of Additive Manufacturing technologies

4041

20

Physics of Metrology Lab.(Manufacturing Engineering)

4041

21

Physics of Metrology Lab.(Manufacturing Engineering)

4041

22

Physics of Metrology Lab.(Manufacturing Engineering)

4041

23

Physics of Metrology Lab.(Manufacturing Engineering)

4041

24

Physics of Metrology Lab.(Mechanical Engineering)

4041

25

Physics of Metrology Lab.(Mechanical Engineering)

4041

26

SURFACE FINISHING TECHNIQUES

4041

27

Additive Manufacturing

4041

28

Physics of Metrology Lab.(Mechanical Engineering)

4032

29

Grinding Technology

4032

30

Physics of Metrology Lab.(Mechanical Engineering)

4032

31

Physics of Metrology Lab.(Manufacturing Engineering)

4032

32

Physics of Metrology Lab.(Manufacturing Engineering)

4032

33

Physics of Metrology

4032

34

Physics of Metrology Lab.(Manufacturing Engineering)

4032

35

Physics of Metrology Lab.(Manufacturing Engineering)

4032

Inventions/Patents

#

Invention title

Reg. number

Country

contributers

Reg. date

Exp. date

1

Smart magnetorheological damper involving nanoparticles stabilized MR fluid

2017/10/1

2036/12/1