Amirkabir University of Technology

[{FirstNameE:SHIMA,LastNameE:BAHRAMIZADEH SAJADI,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Miguel Angel Ariza-Gracia,Rank:3},{FirstNameE:,LastNameE:Morteza Gholami,Rank:4},{FirstNameE:,LastNameE:Alireza Baradaran-Rafii,Rank:5},{FirstNameE:,LastNameE:Philippe Bchler,Rank:6}], "Evaluation of design parameters on the outcome of intrastromal ring surgery using biomechanical simulations", Plos One, 2024 Dec vol. 19, no. 12, pp.1-17, 2024.

[{FirstNameE:SEYED AREF,LastNameE:HOSSEINI,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2}], "Comparison of stress distribution in fully porous and dense-core porous scaffolds in dental implantation", Journal of The Mechanical Behavior of Biomedical Materials, 2024 May vol. 156, no. 106602, pp.1-11, 2024.

[{FirstNameE:OMID,LastNameE:GHADERZADEH,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Mohammad Bayat,Rank:3},{FirstNameE:,LastNameE:NAGHMEH BAHRAMI,Rank:4},{FirstNameE:BAHRAM,LastNameE:JAFARI,Rank:5}], "Application and analysis of customized bone graft of a patient undergoing mandible augmentation and dental implantation", Journal of Mechanics In Medicine and Biology, 2023 May vol. 23, no. 3, pp.1-15, 2023.

[{FirstNameE:SHIMA,LastNameE:BAHRAMIZADEH SAJADI,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:MAHTAB,LastNameE:MEHRABBEIK,Rank:3},{FirstNameE:,LastNameE:Alireza Baradaran-Ra?i,Rank:4},{FirstNameE:,LastNameE:Khosrow Jadidi,Rank:5},{FirstNameE:Sajad,LastNameE:Jafari,Rank:6}], "A Fractal Approach to Nonlinear Topographical Features of Healthy and Keratoconus Corneas Pre- and Post-Operation of Intracorneal Implants", Fractal and Fractional, 2022 Nov vol. 6, no. 11, pp.668-688, 2022.

[{FirstNameE:SHIMA,LastNameE:BAHRAMIZADEH SAJADI,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Jiri Nohava,Rank:3},{FirstNameE:,LastNameE:Miguel Angel Ariza-Gracia,Rank:4},{FirstNameE:,LastNameE:Philippe Bchler,Rank:5}], "Effects of corneal preservation on the mechanical response of porcine corneas measured by nano-indentation", Soft Materials, 2022 Jun vol. 20, no. 2, pp.1-10, 2022.

[{FirstNameE:SEYED AREF,LastNameE:HOSSEINI,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2}], "Biomechanical evaluations of the long-term stability of dental implant using finite element modeling method: a systematic review", Journal of Advanced Prosthodontics, 2022 Jun vol. 14, no. 3, pp.182-202, 2022.

[{FirstNameE:SHIMA,LastNameE:BAHRAMIZADEH SAJADI,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Alireza Baradaran-Rafii,Rank:3},{FirstNameE:,LastNameE:Miguel Angel Ariza-Gracia,Rank:4},{FirstNameE:,LastNameE:Philippe Bchler,Rank:5}], "A Comparative Study on Common Scenarios of Single-segment and Double-segment Intracorneal Ring Segments in a Keratoconus Corneal Model", Iranian Journal of Biomedical Engineering, 2022 Mar vol. 15, no. 4, pp.341-352, 2022.

[{FirstNameE:BAHRAM,LastNameE:JAFARI,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:MasoudTahani,Rank:3},{FirstNameE:,LastNameE:NimaAshjaee,Rank:4}], "A comparative study of bone remodeling around hydroxyapatite-coated and novel radial functionally graded dental implants using finite element simulation", Medical Engineering and Physics, 2022 Feb vol. 102, no. 103775, , 2022.

[{FirstNameE:FAEZEH,LastNameE:ESKANDARI,Rank:1},{FirstNameE:SHIMA,LastNameE:BAHRAMIZADEH SAJADI,Rank:2},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:3}], "A new potential indicator in differentiating patients with lumbar spinal stenosis and lumbar intervertebral disc degeneration", Journal of Orthopedic and Spine Trauma, 2021 Sep vol. 7, no. 2, pp.44-47, 2021.

[{FirstNameE:SHIMA,LastNameE:BAHRAMIZADEH SAJADI,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:,Rank:3}], "Effects of lumbar spinal disorders on the vertical ground reaction force and Spatio-temporal parameters in gait", Clinical Biomechanics, 2021 Aug vol. 89, no. 1, pp.1-5, 2021.

[{FirstNameE:,LastNameE:,Rank:1},{FirstNameE:SHIMA,LastNameE:BAHRAMIZADEH SAJADI,Rank:2},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:3}], "A New Potential Indicator in Differentiating Patients with Lumbar Spinal Stenosis and Lumbar Intervertebral Disc Degeneration", Journal of Orthopedic and Spine Trauma, 2021 Aug vol. 7, no. 2, pp.44-47, 2021.

[{FirstNameE:SHIMA,LastNameE:BAHRAMIZADEH SAJADI,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:FAEZEH,LastNameE:ESKANDARI,Rank:3}], "Effects of lumbar spinal disorders on the vertical ground reaction force and Spatio-temporal parameters in gait", Clinical Biomechanics, 2021 Aug vol. 89, no. 1, pp.1-5, 2021.

[{FirstNameE:FATEME,LastNameE:BADIE,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:MOSTAFA,LastNameE:ROSTAMI,Rank:3}], "Dynamic analysis of varus knee using a subject-specific multibody model of the knee before and after osteotomy", Medical Engineering and Physics, 2019 Feb vol. 0, no. 0, pp.1-8, 2019.

[{FirstNameE:FATEME,LastNameE:BADIE,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:MOSTAFA,LastNameE:ROSTAMI,Rank:3}], "A non-invasive measurement of the knee contact force using a subject-specific musculoskeletal model to investigate osteotomy", Journal of Medical Engineering and Technology, 2018 Jun vol. 42, no. 4, pp.251-258, 2018.

[{FirstNameE:MARYAM,LastNameE:GERAMIZADEH,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Reza Amid,Rank:3},{FirstNameE:,LastNameE:Mahdi Kadkhodazadeh,Rank:4}], "Three-dimensional optimization and sensitivity analysis of dental implant thread parameters using finite element analysis", Journal of The Korean Association of Oral and Maxillofacial Surgeons, 2018 Apr vol. 44, no. 2, pp.59-65, 2018.

[{FirstNameE:,LastNameE:David I. Simunic,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Neil Broom,Rank:3},{FirstNameE:,LastNameE:Peter Robertson,Rank:4}], "Mechanically induced disruption of the nucleus pulposus and a computer based predictive model", Bone and Joint Journal, 2018 Feb vol. 84, no. 1, pp.137-137, 2018.

[{FirstNameE:MARYAM,LastNameE:GERAMIZADEH,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Reza Amid,Rank:3},{FirstNameE:,LastNameE:Mahdi Kadkhodazadeh,Rank:4}], "Comparison of finite element results with photoelastic stress analysis around dental implants with different threads", Dental and Medical Problems, 2018 Jan vol. 55, no. 1, pp.17-22, 2018.

[{FirstNameE:,LastNameE:Amirhossein Salimi,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Paniz Naraghi-Bagherpour,Rank:3},{FirstNameE:,LastNameE:Mohammad-Mehdi Khani,Rank:4}], "Coupled boundary element-finite element model to estimate human heel-pad elasticity modulus", Biomedical Engineering-Applications Basis Communications, 2017 Jul vol. 29, no. 3, pp.1-6, 2017.

[{FirstNameE:MARYAM,LastNameE:GERAMIZADEH,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Reza Amid,Rank:3},{FirstNameE:,LastNameE:Mahdi Kadkhodazadeh,Rank:4}], "Finite element analysis of dental implants with and without microthreads under static and dynamic loading", Journal of Long-Term Effects of Medical Implants, 2017 Jan vol. 27, no. 1, pp.25-33, 2017.

[{FirstNameE:MARYAM,LastNameE:GERAMIZADEH,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Reza Amid,Rank:3},{FirstNameE:,LastNameE:Mahdi Kadkhodazadeh,Rank:4}], "Static, Dynamic, and Fatigue Finite Element Analysis of Dental Implants with Different Thread Designs", Journal of Long-Term Effects of Medical Implants, 2016 Nov vol. 26, no. 4, pp.347-355, 2016.

[{FirstNameE:NAVID,LastNameE:SOLTANI HAFSHEJANI,Rank:1},{FirstNameE:,LastNameE:Nima Jamshidi,Rank:2},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:3}], "Finite Element Study of Lumbar Section before and After Disc Arthroplasty with disc implant (SB Charite III) in comparison to PEEK Twin Peaks Lumbar Cage", Ieee Xplore, 2015 Feb vol. 1, no. 1, pp.173-176, 2015.

[{FirstNameE:MIR HOSSEIN,LastNameE:MOUSAVI,Rank:1},{FirstNameE:NASSER,LastNameE:FATOURAEE,Rank:2},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:3},{FirstNameE:,LastNameE:Ali Pashaee,Rank:4},{FirstNameE:,LastNameE:Alejandro F. Frangi,Rank:5}], "USING ATLAS OF HEART SHAPES FOR SIMULATION OF BLOOD FLOW IN LEFT VENTRICLE", Biomedical Engineering-Applications Basis Communications, 2013 Dec vol. 25, no. 6, pp.1-8, 2013.

[{FirstNameE:MINA,LastNameE:SOLEIMANIFAR,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2}], "Energy based simulation of trabecular bone fracture healing using finite element and fuzzy logic", Journal of Applied Mathematics, 2013 May vol. 4, no. 5, pp.49-55, 2013.

[{FirstNameE:MIR HOSSEIN,LastNameE:MOUSAVI,Rank:1},{FirstNameE:NASSER,LastNameE:FATOURAEE,Rank:2},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:3},{FirstNameE:,LastNameE:Ali Pashaee,Rank:4},{FirstNameE:,LastNameE:Oscar Camara,Rank:5},{FirstNameE:,LastNameE:Alejandro F. Frangi,Rank:6}], "Numerical simulation of blood flow in the left ventricle and aortic sinus using magnetic resonance imaging and computational fluid dynamics", Computer Methods In Biomechanics and Biomedical Engineering, 2012 Sep vol. 1, no. 1, pp.1-1, 2012.

[{FirstNameE:,LastNameE:Amir Hossein Saveh,Rank:1},{FirstNameE:,LastNameE:Ali Reza Zali,Rank:2},{FirstNameE:,LastNameE:Seyyed Morteza Kazemi,Rank:3},{FirstNameE:,LastNameE:Sohrab Keyhani,Rank:4},{FirstNameE:,LastNameE:Hanafiah Yussof,Rank:5},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:6},{FirstNameE:,LastNameE:Qureish Vanat,Rank:7},{FirstNameE:,LastNameE:Mahmoud Chizari,Rank:8}], "Knee dynamic analysis based on 2D-to-3D registration of fluoroscopic and angiographic images", Strojniski Vestnik-Journal of Mechanical Engineering, 2012 Jul vol. 9, no. 1, pp.79-97, 2012.

[{FirstNameE:,LastNameE:Mohammad-Mehdi Khani,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Kamran Azma,Rank:3},{FirstNameE:,LastNameE:Iman Naseh,Rank:4},{FirstNameE:AMIR HOSSEIN,LastNameE:SALIMI,Rank:5}], "Hyper-elastic parameter estimation of human heel-pad: A finite element and evolutionary based algorithm", Journal of Mechanics In Medicine and Biology, 2012 Apr vol. 12, no. 3, pp.1-6, 2012.

[{FirstNameE:AZADEH,LastNameE:GHOUCHANI,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Mohammad Ravari,Rank:3}], "Design of an Elastic Arthroplastic Disc Optimized under Different Loads", Iranian Journal of Medical Physics, 2011 Jul vol. 8, no. 2, pp.65-74, 2011.

[{FirstNameE:,LastNameE:Ahmad Raeisi Najafi,Rank:1},{FirstNameE:,LastNameE:Kaveh PourAkbar Saffar,Rank:2},{FirstNameE:AhmadReza,LastNameE:Arshi,Rank:3},{FirstNameE:ERFAN,LastNameE:MALLAKIN,Rank:4},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:5},{FirstNameE:MOHAMMAD REZA,LastNameE:ESLAMI,Rank:6},{FirstNameE:,LastNameE:Manssour H. Moeinzadeha,Rank:7}], "Propagation of Microcracks in Bovine Osteonal Cortical Bone", Akademiea, 2011 Mar vol. 1, no. 1, pp.1-7, 2011.

[{FirstNameE:,LastNameE:Soroush Nobari,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:SHANDIZ,LastNameE:ZOMORODIMOGHADAM,Rank:3}], "Three-dimensional design optimisation of patient-specific femoral plates as a means of bone remodelling reduction", Computer Methods In Biomechanics and Biomedical Engineering, 2010 Dec vol. 13, no. 6, pp.819-827, 2010.

[{FirstNameE:AMIRHOSSEIN,LastNameE:SAVEH,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Mahmoud Chizari,Rank:3}], "B-14 Measurement of an Intact Knee Kinematics Using Gait and Fluoroscopic Analysis; Experimental and Numerical Studies", Journal of Biomechanics, 2010 Jun vol. 43, no. 1, , 2010.

[{FirstNameE:AMIRHOSSEIN,LastNameE:SAVEH,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Mahmoud Chizari,Rank:3}], "Measurement of an intact knee kinematics using gait and fluoroscopic analysis", Knee Surgery Sports Traumatology Arthroscopy, 2010 Jun vol. 19, no. 2, pp.267-272, 2010.

[{FirstNameE:,LastNameE:Seyyed Amir Hooshiar Ahmadi,Rank:1},{FirstNameE:GHOLAMREZA,LastNameE:ROUHI,Rank:2},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:3},{FirstNameE:,LastNameE:Seyyed Ali Hooshiar Ahmadi,Rank:4}], "Simultaneous presence of growth and remodeling in the bone adaptation theory", American Journal of Applied Sciences, 2009 May vol. 6, no. 1, pp.1816-1824, 2009.

[{FirstNameE:MIR HOSSEIN,LastNameE:MOUSAVI,Rank:1},{FirstNameE:NASSER,LastNameE:FATOURAEE,Rank:2},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:3}], "Finite element analysis of blood flow characteristics in a Ventricular Assist Device (VAD)", Simulation Modelling Practice and Theory, 2009 Mar vol. , no. 17, , 2009.

[{FirstNameE:AHMAD,LastNameE:RAESI NAJAFI,Rank:1},{FirstNameE:ERFAN,LastNameE:MALLAKIN,Rank:2},{FirstNameE:,LastNameE:,Rank:3},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:4},{FirstNameE:AhmadReza,LastNameE:Arshi,Rank:5},{FirstNameE:MOHAMMAD REZA,LastNameE:ESLAMI,Rank:6}], "Fracture Test of Bovine Contrical Bone ,Evaluation of Bone Toughness Properties and Consideration of Bone Microstructure Effect on Fracture Behavior", Amirkabir, 2008 Jul vol. 0, no. 0, , 2008.

[{FirstNameE:,LastNameE:Daniel P.Nicolella,Rank:1},{FirstNameE:,LastNameE:Ben H.Thacker,Rank:2},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:3},{FirstNameE:,LastNameE:Dwight T.Davy,Rank:4}], "The effect of three-dimensional shape optimization on the probabilistic response of a cemented femoral hip prosthesis", Journal of Biomechanics, 2006 Sep vol. 39, no. 7, pp.1265-1278, 2006.

[{FirstNameE:YAGHOUB,LastNameE:DABIRI,Rank:1},{FirstNameE:NASSER,LastNameE:FATOURAEE,Rank:2},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:3}], "A computer simulation of blood flow in arterial networks, including blood non-newtonian models and arterial stenosis", Ieee Engineering In Medicine and Biology Magazine, 2006 Apr vol. 3, no. 1, pp.2312-2315, 2006.

[{FirstNameE:,LastNameE:Zohreh Barani,Rank:1},{FirstNameE:,LastNameE:Mohammad Haghpanahi,Rank:2},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:3},{FirstNameE:,LastNameE:Hassan Saeidi,Rank:4}], "A Three Dimensional Stress Analysis Of Diabetic Insole And Evaluation Of Silicone Gel Material Using Finite Element Approach", Iranian Journal of Biomedical Engineering, 2005 Feb vol. 1, no. 2, pp.111-116, 2005.

[{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:1},{FirstNameE:,LastNameE:Zohreh Barani,Rank:2},{FirstNameE:,LastNameE:DWIGHT T. DAVY,Rank:3}], "Adaptive Bone Remodeling Criteria Applied to Design Optimization of Femoral Component of Hip Prostheses", Journal of Mechanics In Medicine and Biology, 2005 Feb vol. 5, no. 1, pp.1-12, 2005.

[{FirstNameE:,LastNameE:Zohreh Barani,Rank:1},{FirstNameE:,LastNameE:Mohammad Haghpanahi,Rank:2},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:3}], "Three dimensional stress analysis of diabetic insole: A finite element approach", Technology and Health Care, 2005 Feb vol. 13, no. 3, pp.185-192, 2005.

[{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:1},{FirstNameE:,LastNameE:Dwight T.Davy,Rank:2}], "Three-dimensional shape optimization of femoral component of hip prostheses with nonlinear frictional interface", Journal of Mechanics In Medicine and Biology, 2004 Jun vol. , no. 2, , 2004.

[{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:1},{FirstNameE:AhmadReza,LastNameE:Arshi,Rank:2}], "Material optimization of femoral component of total hip prosthesis using fiber reinforced polymeric composites", Medical Engineering and Physics, 2001 Sep vol. , no. 23, , 2001.

[{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:1},{FirstNameE:,LastNameE:Dwight T Davy,Rank:2},{FirstNameE:AhmadReza,LastNameE:Arshi,Rank:3},{FirstNameE:YOUSEF,LastNameE:SAADATI,Rank:4}], "Material optimization of femoral component of total hip prosthesis using fiber reinforced polymeric composites", Medical Engineering and Physics, 2001 Sep vol. 23, no. 7, pp.505-511, 2001.

[{FirstNameE:,LastNameE:,Rank:1},{FirstNameE:,LastNameE:,Rank:2},{FirstNameE:ALI,LastNameE:FALLAH,Rank:3},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:4}], "Blood biochemical change following external force application in guonea pig:Early detection of pressure sore", Iranian Biomedical Journal, 2000 Oct vol. , no. , , 2000.

[{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:1},{FirstNameE:,LastNameE:Dwight T.Davy,Rank:2}], "Effects of loading conditions and objective function on three-dimensional shape optimization of femoral components of hip endoprostheses", Medical Engineering and Physics, 2000 Sep vol. 22, no. 4, pp.243-251, 2000.

[{FirstNameE:SHIMA,LastNameE:BAHRAMIZADEH SAJADI,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Miguel Angel Ariza-Gracia,Rank:3},{FirstNameE:,LastNameE:Jiri Nohava,Rank:4},{FirstNameE:,LastNameE:Philippe Bchler,Rank:5}], "EFFECTS OF CORNEAL PRESERVATION ON THE MECHANICAL PROPERTIES OF PORCINE CORNEAS,", 27th Congress of the European Society of Biomechanics (ESB2022), Jun 2022.

[{FirstNameE:MOHAMMAD,LastNameE:HOSSEINALIZADEH,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:SETAREH,LastNameE:KHORSHIDPARAST,Rank:3}], "Finite Element Analysis of an FGM Dental Implant Under Static and Dynamic Loading,", 28th National & 6th International Iranian Conference on Biomedical Engineering, Nov 2021.

[{FirstNameE:SHIMA,LastNameE:BAHRAMIZADEH SAJADI,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Philippe Bchler,Rank:3}], "A Finite Element Study on the Biomechanics of Intracorneal Implants in Keratoconus Corneal Models,", Bern Data Science Day 2021, Apr 2021.

[{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:1},{FirstNameE:SHIMA,LastNameE:BAHRAMIZADEH SAJADI,Rank:2},{FirstNameE:,LastNameE:Mehdi Khanlari,Rank:3},{FirstNameE:,LastNameE:Morteza Gholami,Rank:4}], "Effects of Different Corneal Ring Segments with Identical Total Arc Length on Keratoconic Eyes: A Finite Element Study,", 26th National and 4th International Conference of Biomedical Engineering, Nov 2019.

[{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:1},{FirstNameE:,LastNameE:Mehdi Khanlari,Rank:2},{FirstNameE:SHIMA,LastNameE:BAHRAMIZADEH SAJADI,Rank:3},{FirstNameE:,LastNameE:Morteza Gholami,Rank:4},{FirstNameE:FAEZEH,LastNameE:ESKANDARI,Rank:5}], "A finite element comparative study on the effects of corneal ring segments on keratoconic eyes,", American Society of Biomechanics(ASB)East Coast Meeting, Apr 2019.

[{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:1},{FirstNameE:SHIMA,LastNameE:BAHRAMIZADEH SAJADI,Rank:2},{FirstNameE:FAEZEH,LastNameE:ESKANDARI,Rank:3}], "A study of vertical ground reaction force in gaits of patients with some anatomical spinal disorders,", American Society of Biomechanics(ASB)East Coast Meeting, Apr 2019.

[{FirstNameE:VAHID,LastNameE:MALBOUBY,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Sheida Vafadar,Rank:3}], "Distinguishing between the effect of load magnitude and number of cycles in Nijmengen trabecular bone remodeling model,", American Society of Biomechanics(ASB)East Coast Meeting, Apr 2019.

[{FirstNameE:NAVID,LastNameE:SOLTANI HAFSHEJANI,Rank:1},{FirstNameE:,LastNameE:Nima Jamshidi,Rank:2},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:3}], "Finite Element Study of Lumbar Section before and After Disc Arthroplasty with disc implant (SB Charite III) in comparison to PEEK Twin Peaks Lumbar Cage,", 21th Iranian Conference on Biomedical Engineering (ICBME), Nov 2014.

[{FirstNameE:HANIYEH,LastNameE:HEMMATIAN,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2}], "Meshless modeling of microcrack growth in cortical bone,", 10th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE), Apr 2012.

[{FirstNameE:SEYYED AMIR,LastNameE:HOOSHIAR AHMEDI,Rank:1},{FirstNameE:AhmadReza,LastNameE:Arshi,Rank:2},{FirstNameE:GHOLAMREZA,LastNameE:ROUHI,Rank:3},{FirstNameE:,LastNameE:Ahmad raeisi najafi,Rank:4},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:5}], "An Investigation on the effects of low-amplitude, high frequency (LAHF) Mechanical Stimuli on Matrix-Extracellular Fluid-Osteocyte Complex,", 56th Annual Meeting of the Orthopaedic Research Society, Mar 2010.

[{FirstNameE:MOHAMMAD MEHDI,LastNameE:KHANI,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:ABOLHASAN,LastNameE:SALIMI,Rank:3}], "Nonlinear hyperelastic parameter estimation of human heel-pad: A finite element and evolutionary based algorithm,", Feb 2008.

[{FirstNameE:,LastNameE:A. Raeisi Najafi,Rank:1},{FirstNameE:AhmadReza,LastNameE:Arshi,Rank:2},{FirstNameE:MOHAMMAD REZA,LastNameE:ESLAMI,Rank:3},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:4},{FirstNameE:SAEED,LastNameE:MALEKNIA,Rank:5}], "Propagation of Microcracks in Osteonal Cortical Bone,", 15th Annual (International) Conference on Mechanical EngineeringISME2007, May 2007.

[{FirstNameE:,LastNameE:Nasser Zakeri,Rank:1},{FirstNameE:,LastNameE:Farzam Farahmand,Rank:2},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:3}], "Optimal Design of a Hip Joint Implant With Hollow Stem Using Finite Element Method,", ASME 8th Biennial Conference on Engineering Systems Design and Analysis- American Society of Mechanical Engineers, Jul 2006.

[{FirstNameE:YAGHOUB,LastNameE:DABIRI,Rank:1},{FirstNameE:NASSER,LastNameE:FATOURAEE,Rank:2},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:3}], "A computer model of blood flow in arterial network,", 12th Iranian Conference on Biomedical Engineering, Nov 2005.

[{FirstNameE:YAGHOUB,LastNameE:DABIRI,Rank:1},{FirstNameE:NASSER,LastNameE:FATOURAEE,Rank:2},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:3}], "A Non _ Newtonian Finite Element Analysis of Blood Flow in the Arterial Networks,", Nov 2005.

[{FirstNameE:YAGHOUB,LastNameE:DABIRI,Rank:1},{FirstNameE:NASSER,LastNameE:FATOURAEE,Rank:2},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:3}], "Finite element simulation of blood flow in arteries,", Sep 2005.

[{FirstNameE:YAGHOUB,LastNameE:DABIRI,Rank:1},{FirstNameE:NASSER,LastNameE:FATOURAEE,Rank:2},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:3}], "A Computer simulation of Blood flow in Arterial Networks, Including Blood Non - Newtonian Models and Arterial stenosis,", Sep 2005.

[{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:1},{FirstNameE:,LastNameE:Neil Broom,Rank:2},{FirstNameE:,LastNameE:Peter Robertson,Rank:3},{FirstNameE:,LastNameE:David I. Simunic,Rank:4}], "Investigation of Failure Potential of Intervertebral Disc Using Poroelastic Finite Element Modeling,", 10th Iranian conference on Biomedical Engineering, Oct 2001.

[{FirstNameE:,LastNameE:,Rank:1},{FirstNameE:,LastNameE:,Rank:2},{FirstNameE:ALI,LastNameE:FALLAH,Rank:3},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:4},{FirstNameE:,LastNameE:,Rank:5}], "Biomechanical histological studies of experimental pressure sores in guinea pig,", 10th Iranian conference on Biomedical Engineering, Dec 2000.

[{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:1},{FirstNameE:,LastNameE:Neil Broom,Rank:2},{FirstNameE:,LastNameE:Peter Robertson,Rank:3}], "Poroelastic parameter estimation of intervertebral disc: a finite element and evolutionary based algorithm,", 2000 American Society of Biomechanics Conference, Jul 2000.

[{FirstNameE:,LastNameE:Shermin Kazemkhani,Rank:1},{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:2},{FirstNameE:,LastNameE:Farid Bahrpeyma,Rank:3}], "Effects of heel height on mechanical characteristics of standing still posture in females.,", 9th Iranian Conference on Biomedical Engineering, Feb 2000.

[{FirstNameE:HAMID REZA,LastNameE:Katoozian,Rank:1}], "Efficient adaptive boundary mesh refinement algorithm for two-dimensional potential and elastic problems,", 3th Biennial Joint Conference on Engineering Systems Design and Analysis ESDA- Part 8, Jul 1996.