Mohammad Reza Khedmati
Professor
Department of Maritime Engineering
Structure & Construction Engineering
Department of Maritime Engineering
Structure & Construction Engineering
Download PDF فارسی
Content
Pepole
CV
Download PDF فارسی
Email:
khedmati
aut.ac.ir
aut.ac.irPhone:
021-64543113
h-index (Scopus):
20
Citations (Scopus):
1198
Languages
#
Language
Translation Skill
Dialogue Skill
5
English
Fluent
Fluent
Supervised PhD Theses
#
Thesis title
By
Date
1
INVESTIGATION OF THE GENERAL LOADS ACTING ON A MULTIHULL VESSEL AND EVALUATION OF ITS ULTIMATE STRENGTH IN DIFFERENT DAMAGED CONDITIONS
Karim Akbari Vakil Abadi & Mohammad Reza Khedmati
December 2014
2
ULTIMATE STRENGTH OF COMPOSITE SHIPS CONSIDERING THE EFFECT OF SUPERSTRUCTURE
Fattaneh Morshedsolouk & Mohammad Reza Khedmati
October 2013
3
VIBRATION ANALYSIS OF STIFFENED SHELLS HAVING PARABOLIC CURVATURE WITH APPLICATION TO SHIP STRUCTURES
Pedram Edalat & Mohammad Reza Khedmati
June 2013
4
EFFECT OF CORROSION ON THE ULTIMATE STRENGTH OF AGED SHIPS
Zorareh Nouri & Mohammad Reza Khedmati
September 2011
Supervised MSc Theses
#
Thesis title
By
Date
1
Dynamic modeling of collision between ships and offshore wind turbines using the finite element method
Mahandokht Mashhadi & Mohammad Reza Khedmati
September 2023
2
Structural design and analysis of foils and their joints in a hydrofoil vessel for different operating modes
Seyyed Rouhollah Hosseini & Mohammad Reza Khedmati
August 2023
3
Probabilistic evaluation of the effect of holes with random distribution and specifications on the strength of un-stiffened steel plates under uni-axial in-plane compression
Sara Mottaghi & Mohammad Reza Khedmati
July 2023
4
Study of multi-wall configurations in reducing the consequences induced by bow-to-side collisions in tanker vessels
Kazem Baharvand & Mohammad Reza Khedmati
July 2023
5
Ultimate Strength of Container Ships under Combination of Bending and Torsion Loading
Mohammadamin Safa & Mohammad Reza Khedmati
July 2022
6
Residual strength of offshore platform structure considering corrosion after alternative ship impacts
Reza Zendehdel & Mohammad Reza Khedmati
June 2022
7
Effect of different corrosion models on ultimate strength of bulk carriers
Mohammad Nafar & Mohammad Reza Khedmati
May 2022
8
Numerical analysis of response of stiffened aluminium plates with fixed framing system subject to repeated slamming
Ali Rayzan & Mohammad Reza Khedmati
April 2022
9
Residual ultimate strength analysis of ship damaged plates under uni-axial in-plane compresison
Hamide Mohammadi & Mohammad Reza Khedmati
January 2022
10
Simulation of welding-induced deflections in flat sub-assemblies
Morteza Soltani Nejad & Mohammad Reza Khedmati
October 2021
11
investigation into effects of crack geometric parameters in tensile behavior of un-stiffened/stiffened plates(ignoring crack propagation)
Milad Karami & Mohammad Reza Khedmati
January 2021
12
Study of zone strength of aluminium ship structure considering changes in framing system (fixed, floating or combined)
Zahra Kosar & Mohammad Reza Khedmati
November 2020
13
Investigation on subsea pipelines subjected to dropped objects impact
Parsa Asaseh & Mohammad Reza Khedmati
September 2020
14
investigation intothe load-carrying behaviour of sps (sandwich plate system)plates subject to inplane compression or lateral presure
Sana Kouliyan & Mohammad Reza Khedmati
September 2020
15
modelling and analysis of ship bottom structure when launching on airbags
Fatemeh Barani & Mohammad Reza Khedmati
February 2020
16
Ultimate strength of ships under combined bending considering corrosion damage
Hossein Rahbarimanesh & Mohammad Reza Khedmati
December 2019
17
Numerical simulation of line heating method for forming of aluminium plates
Mehdi Najafi & Mohammad Reza Khedmati
September 2019
18
Numerical analysis of the effect of shear in the ship cross-section on its ultimate strength under
Mehdi Askari & Mohammad Reza Khedmati
July 2019
19
Experimental investigation into strength behavior of pitted plates subject touni-axial in-plane compression
Farshed Mahde Allamdarloo & Mohammad Reza Khedmati
December 2018
20
Preparation of suitable methods for the repair of damaged hull of aluminium and composite high speed crafts
Abbas Karimi Kisoumi & Mohammad Reza Khedmati
November 2018
21
Assessment of the effects of pitting corrosion on static strength of tubular joints under bending
Arno Petrosian & Mohammad Reza Khedmati
November 2018
22
Evaluation of Ultimate Strength of Ship Hulls Girders under Combined Vertical and Horizontal Bending Moments
Azadeh Chamkoori & Mohammad Reza Khedmati
June 2018
23
Analytical study on different manufacturing methods (SKD, CKD and CBU) of lightweight vessels and identification of the application-oriented optimum method
Farshid Aliahmad & Mohammad Reza Khedmati
May 2018
24
Evaluation of Initial Imperfections and corrosion Effects on the Ultimate Strength of Ship Hulls Girders
Zohreh Adibi Pour & Mohammad Reza Khedmati
February 2018
25
Assessment of static strength of tubular members with pitting corrosion under axial compressive loading
Elahe Tavana & Mohammad Reza Khedmati
February 2018
26
Investigation into the vibrational behavior of marine aluminum panel subject to repetitive slamming induced impulses
Mohammad Sadegh Hosein Poor & Mohammad Reza Khedmati
October 2017
27
Assessment of buckling behavior and ultimate strength of corroded tubular members under compressive and lateral impact loads
Mohammad Azimi Ghadikolaei & Mohammad Reza Khedmati
October 2017
28
Investigation into the initial imperfections in aluminum vessels and study of their effects on strength of aluminum stiffened plates
Mohsen Norozi Pour & Mohammad Reza Khedmati
July 2017
29
Study on the effect of variation in framing system (fixed, floating or combined)on the strength of high speed aluminum craft
Pedram Poorabasi Najafabadi & Mohammad Reza Khedmati
July 2017
30
Analysis of Ship Bottom Structures When Launching on Airbags
Amirsalar Haghayeghi & Mohammad Reza Khedmati
July 2017
31
Study on ultimate strength of box girders considering different corrosion models
Hamed Helmi & Mohammad Reza Khedmati
June 2017
32
Evaluation and retrofit of a refinery tower under dynamic and thermal load (modal analysis
Mohammad Poorie & Mohammad Reza Khedmati
February 2017
33
Behavior of Cold-Formed Beam-Column Under Cyclic Loading
Omid Fasihizadeh & Mohammad Reza Khedmati
February 2017
34
Residual strength of an offshore platform following multiple side impacts
Mohammasadegh Dehghan & Mohammad Reza Khedmati
February 2017
35
Lateral-torsional Buckling Analysis of Thin-Walled Cold-Formed Girder With Corrugated Webs Including Opening
Mohammad Tolouei & Mohammad Reza Khedmati
October 2016
36
strength of pitted unstiffened/stiffened plates under tension
Komeil Biniaz & Mohammad Reza Khedmati
September 2016
37
Prediction and Control of Welding Distortion in Plate Structures
Mohamad Mazidi & Mohammad Reza Khedmati
July 2016
38
Investigation of the effects of fabrication tolerances on the buckling strength of submarine pressure hull
Aliasghar Rezaei & Mohammad Reza Khedmati
May 2016
39
Numerical analysis of buckling strength and postbuckling behavior of pitted plates subject to inplane biaxial compression
Saleh Lotfi & Mohammad Reza Khedmati
April 2016
40
Evaluation of causes of marine casaulties related to structural and manufacturing characteristics in traditional and nontraditional ships in jurisdiction regions
Hossein Zare & Mohammad Reza Khedmati
March 2016
41
Derivation of Simple Equations for Estimation of Ultimate Strength of Aged Ship
Najmeh Salemizadeh & Mohammad Reza Khedmati
February 2016
42
Experimental investigation into strength of pitted plates
Gholamreza Abad & Mohammad Reza Khedmati
November 2015
43
Investigation into the Behaviour of Reinforced Concrete Beams Retrofitted With Frp Fabrics subjected to Blast Loading
Mehdi Saloo & Mohammad Reza Khedmati
October 2015
44
Experimental investigation of ultimate strength and buckling behavior of tubular members with corrosion imperfections
Ardalan Farazian Shirazy & Mohammad Reza Khedmati
September 2015
45
Preparation of a preprocessor/postprocessor code for modeling progressive collapse procedure and
ultimate strength analysis of ship hulls girders
Omid Ferdowsi Hossein Abadi & Mohammad Reza Khedmati
September 2015
46
Derivation of Empirical Formulations for Estimation of
Ultimate Strength of Composite Ship Hulls
Mohsen Sarvari & Mohammad Reza Khedmati
July 2015
47
Investigation into the ultimate strength of corroded box girders
Mohammad Mahmoodi Salehabad & Mohammad Reza Khedmati
February 2015
48
Dynamic Stability Analysis Of Composite Plates Using Element Free Galerkin Method
Amin Etemad Shoar & Mohammad Reza Khedmati
February 2015
49
Structural Analysis of Ships Bottom Structure During Launching
Mohsen Drhghani Tafti & Mohammad Reza Khedmati
December 2014
50
Simulation of Aluminum Welded Joints Using Finite Element Method
Hessam Yoosefzadeh & Mohammad Reza Khedmati
October 2014
51
Investigation into initial imperfections during construction of composite ships with VIP method and their numerical simulation
Mojtaba Shomali Varzande & Mohammad Reza Khedmati
October 2014
52
Assessment of buckling behavior and ultimate strength of multiplanar tubular joints with overall scorrosion defects
Majid Rashidi & Mohammad Reza Khedmati
October 2014
53
Assessment of deformation and behavior of stiffened corroded plates with regard to use as the gate of dry docks
Mohammad Amin Kalantari & Mohammad Reza Khedmati
October 2014
54
Buckling distortion of aluminium stiffened plates during welding
Milad Mohamadi & Mohammad Reza Khedmati
October 2014
55
3D Hydroelastic Investigation into the Water Impact on a
Geometrically Imperfect Aluminum Panel
Mohsen Khabir & Mohammad Reza Khedmati
October 2014
56
Assessment of buckling behavior and ultimate strength of imperfect axially pre-stressed tubular members of offshore structures under impact loads considering different shapes of impactors and various
Hassan Fardi & Mohammad Reza Khedmati
November 2013
57
Investigation of the effects of various pitting corrosion parameters with random distribution on the behavior of un-stiffened and stiffened plates under uni-axial in-plane compression
Mojtaba Moosapoor Tooservandani & Mohammad Reza Khedmati
November 2013
58
Investigation into strength and performance of protective plated structures against perforation
Moslem Zebardast & Mohammad Reza Khedmati
October 2013
59
Investigation into buckling and postbuckling Behavior of Sandwich Panels With Belsa or PVC core made by hand layup and Vacum bag Infusion Procedures
Sam Barati Nardin & Mohammad Reza Khedmati
October 2013
60
Experimental and numerical study of geometrical parameters effects on the strength of composite-aluminum adhesively bonded joint in pure tension
Ashkan Babazadeh & Mohammad Reza Khedmati
September 2013
61
Prediction and control of welding distortion in plate structures
Seyed Eshagh Mousavi & Mohammad Reza Khedmati
September 2013
62
Optimization of welding-induced buckling distortion in aluminium stiffened plates
Modjtaba Kaboodvandy Rad & Mohammad Reza Khedmati
March 2013
63
Buckling Behavior of Stiffened Composite Plates by Nonlinear and Finite Element Methods
Abdollsharif Anbia & Mohammad Reza Khedmati
February 2013
64
Determination of equivalent orthotropic parameters of parabolic stiffened curved with ship structure application.
Pouria Bahrami Ataabadi & Mohammad Reza Khedmati
November 2012
65
Global ship structural analysis with FEM method and its reliability analysis
Amirhosein Heydari & Mohammad Reza Khedmati
November 2012
66
A Numerical Study on the Strength Behaviour of metal-composite T-joints and X-joints in high speed crafts
Mahdi Omidali & Mohammad Reza Khedmati
October 2012
67
Structural analysis of a trimaran vessel in different damaged conditions
Mohsen Mohammadi & Mohammad Reza Khedmati
October 2012
68
Free and Forced Vibration Analysis of stiffened and Unstiffened Parabolic Curved plate
Mohammad Mehdi Mobasheri Zafarabadi & Mohammad Reza Khedmati
February 2012
69
Postbuckling and progressive failure of laminate composite plate under uni-axial compression
Yosef Amiriyan & Mohammad Reza Khedmati
February 2012
70
Analysis of buckling/collapse behavior of tubular members in marine platforms considering corrosion damage
Amirfoad Khalaj & Mohammad Reza Khedmati
February 2012
71
Investigation into the effects of impulsive loads on the behavior of stiffened Aluminum plates
considering initial imperfections
Masoud Pedram & Mohammad Reza Khedmati
October 2011
72
Investigation into the effects of cracks on natural frequency and damping ratio in vibration of plates
Ali Beygi Harchegani & Mohammad Reza Khedmati
July 2011
73
Vibration Response Analysis of Stiffened Plates Under Cyclic Load:
Shahed Jafarpour Hamedani & Mohammad Reza Khedmati
March 2011
74
Modeling and Evaluation of Ultimate Strength of Composite Ships Using Finite Element Method
Sepideh Jafar Zadeh & Mohammad Reza Khedmati
February 2011
75
Investigation into Behaviour of Unstiffened/Stiffened Aluminium plate under combined bi-axial compression and lateral pressure
Hamid Reza Memarian & Mohammad Reza Khedmati
January 2011
76
Evaluation of ultimate strength of a product carrier using finite element method
Ahmadreza Rashedi & Mohammad Reza Khedmati
November 2010
77
Investigation into fatigue reliability of jacket-type platforms considering their dynamic behavior.
Mohammadhossin Vatandost Khalilabad & Mohammad Reza Khedmati
October 2010
78
Optimization of location of shaft line bearings in alignment process considering hull deflection in different load conditions
Alireza Karimaghaloo & Mohammad Reza Khedmati
August 2010
79
Elastic stability of plates with linear / nonlinear variable thickness using the finite element and
analytical methods
Zahra Shahrabi Farahani & Mohammad Reza Khedmati
February 2010
80
Finite Element Analysis of Naval Ships Deck Structure under Lateral Blast Loads
Mohammad Hossein Sadeghi & Mohammad Reza Khedmati
January 2010
81
Response Analysis of Dynamically loaded curved composite sandwich panel in high speed
craft
Mehdi Fakori & Mohammad Reza Khedmati
November 2009
82
Elastic Buckling Analysis of Corroded Plates Using Finite Element Method
Mohammad Mehdi Roshanali & Mohammad Reza Khedmati
November 2009
83
Optimization of composite laminates under lateral impact loads using genetic algorithms
Mohammad Rezayi Sangtayi & Mohammad Reza Khedmati
September 2009
84
Numerical Study on the effect of Out-of-Roundness on the Buckling Behavior and Ultimate Strength
of Stiffened Circular Cylindrical Shells
Mohammadali Adl & Mohammad Reza Khedmati
August 2009
85
Fracture and Inelastic Behavior Analysis of Aluminum Panels Repaired with Composite Patches
Mahdi Mohammad Sharifi & Mohammad Reza Khedmati
April 2009
86
Assessment of buckling behavior and ultimate strength of imperfect axially pre-stressed tubular
members of offshore structures under impact loads
Masood Nazari & Mohammad Reza Khedmati
January 2009
87
Finite Element Study of the Effects of Longitudinal/ Transverse Curvature on the Buckling /Ultimate Strength and Behavior of Deck Structure
Pedram Edalat & Mohammad Reza Khedmati
September 2008
88
ANALYSING BEHAVIOR OF STIFFENED PLATE UNDER IMPACT LOADING OF SLAMMING PHENOMENA
Mojtaba Ghafari & Mohammad Reza Khedmati
January 2008
89
RESPONSE ANALYSIS FOR UNSTIFFENED/STIFFENED PLATES SUBJECT TO UNDERWATER EXPLOSION HOCK
Mohamad Vali Nataj Benamiri & Mohammad Reza Khedmati
July 2007
90
ACOMPARATIVE STUDY ON BENDING, BUCKLING AND ULTIMATE STRENGTH OF ALUMINUM PLATES STIFFENED WITH FIXED AND FLOATING FRAME
Kambiz Yahyazadeh & Mohammad Reza Khedmati
February 2007
91
NUMERICAL AND EXPERIMENTAL STUDY ON THE CRUSHING BEHAVIOUR OF ALUMINUM AND COMPOSITE HIGH SPEED CRAFT AT THE EVENT OF BO
Iraj Kaivanfar & Mohammad Reza Khedmati
January 2007
92
STRESS AND STRAIN ANALYSIS OF MARINE PROPELLERS USING FINITE ELEMENT METHOD
Muhammad Ali Tafazzoly & Mohammad Reza Khedmati
September 2006
93
Buckling/Ultimate strength analysis of aluminum stiffened plates under combined in-plane longitudinal compression
Mohammad Reza Zareei & Mohammad Reza Khedmati
March 2006
94
Numerical strength analysis of unstiffened/stiffened ship plates under military blast loads
Mooud Nikfarjam & Mohammad Reza Khedmati
February 2006
95
Study on the buckling/plastic collapse behavior and strength of stiffened circular cylindrical shells
Mohammad Javad Mazaheri & Mohammad Reza Khedmati
May 2005
96
A Benchmark Study on the Ultimate Strength Formulations for Ship Stiffened Plates
Abdollah Barzegar Bargahi & Mohammad Reza Khedmati
April 2005
97
Introduction and Application of ISUM Plate Element in Simulating Average Stress-Average Strain Relationships of Plates under in-plane Compression
Elaheh Kia & Mohammad Reza Khedmati
April 2005
98
OPTIMUM DESIGN OF STIFFENED PLATES FOR BUCKLING UNDER INPLANE UNIAXIAL COMPRESSION
Abolfazl Nazari & Mohammad Reza Khedmati
February 2004
99
Simulation of Average Stress-Average Strain Relationships of Continuous Plates under Combined Biaxial in-plane Compression and Lateral Pressure
Olfat Abplfazli & Mohammad Reza Khedmati
November 2003
100
Study on the Elastic Local Buckling Strength of Stiffened Plates considering Plate/Stiffener Interaction and Lateral Pressure Effects
Eaetemad Al Deen Rabeae Gholami & Mohammad Reza Khedmati
February 2003
101
Study on Buckling, Post-buckling, Plastic Collapse and Post-collapse Behaviour of Continuous Stiffened Plates Subjected to Combined In-plane Compressive Stresses and Lateral Pressure
Hassan Ghazvini & Mohammad Reza Khedmati
November 2002
102
Buckling Strength of Perforated Plates
Mohammad Javad Khashan & Mohammad Reza Khedmati
September 2002
103
STRENGTH ASSESSMENT OF CONTINUOUS PLATES WITH INITIAL IMPERFECTIONS UNDER COMBINED INPLANE COMPRESSION AND LATERAL PRESSURE
Amir Abbas Shafiei Ardestani & Mohammad Reza Khedmati
June 2002
Books
#
Title
Author(s)
Publisher country
publication date
version
Portal Records
1
SHIP INTRODUCTION
Mohammad Reza Khedmati
Iran (Islamic Republic of)
September 2019
2
2
SHIP INTRODUCTION
Mohammad Reza Khedmati
Iran (Islamic Republic of)
September 2018
1
3
Nonlinear Large Deflection Analysis of Stiffened Plates
Khosrow Ghavami, Mohammad Reza Khedmati
Croatia (Hrvatska)
October 2012
1
4
Corrosion of Aluminium
Mohammad Reza Khedmati, Ebrahim Soleimani, Esmaeeil Zavvar
Iran (Islamic Republic of)
May 2019
1
5
Design of Ship Hull Structures-Vol_1: Fundamentals and Theory
Mohammad Reza Khedmati
Iran (Islamic Republic of)
August 2016
2
6
Design of Ship Hull Structures-Vol_2: Applications
Mohammad Reza Khedmati
Iran (Islamic Republic of)
August 2016
2
7
Design of Ship Hull Structures-Vol_1: Fundamentals and Theory
Mohammad Reza Khedmati
Iran (Islamic Republic of)
April 2014
1
8
Design of Ship Hull Structures-Vol_2: Applications
Mohammad Reza Khedmati
Iran (Islamic Republic of)
April 2014
1
9
Design and Performance of Ships
Mohammad Reza Khedmati, Iraj Kaivanfar
Iran (Islamic Republic of)
April 2012
1
Journal Papers
Portal Records
1
Shahed Jafarpour Hamedani, Mohammad Reza Khedmati, "Optimal weather window for transportation of large-scale offshore structures", MARINE STRUCTURES, July 2023
Vol. 92,
Num. 11,
Page 1-16,
July 2023,
2
Omid Ferdowsi Hossein Abadi, Mohammad Reza Khedmati, "A review on ultimate strength of aluminium structural elements and systems for marine applications", OCEAN ENGINEERING, July 2021
Vol. 232,
Num. 7,
Page 109153-109153,
July 2021,
3
Mojtaba Shokri, Mohammad Reza Khedmati, Karim Akbari Vakilabadi, Mohammad Rezayi Sangtabi, "Experimental Analysis of slam-induced pressure on the bow-segment of surface ship", Journal of Marine Engineering, June 2021
Vol. 17,
Num. 33,
Page 77-83,
June 2021,
4
Omid Ferdowsi Hossein Abadi, Mohammad Reza Khedmati, Mohsen Norozi Pour, "Statistical analysis of initial deflection of aluminium plating between stiffeners", THIN-WALLED STRUCTURES, April 2021
Vol. 161,
Num. 4,
Page 107528-107528,
April 2021,
5
Hamid Moaieri, Mohammad Reza Khedmati, "A detailed finite element investigation of the effects of local lateral high-velocity impacts on the ultimate strength of unstiffened steel plates subjected to uniaxial in-plane compression", MARINE STRUCTURES, January 2021
Vol. 75,
Num. 1,
Page 102842-102842,
January 2021,
6
Shahed Jafarpour Hamedani, Mohammad Reza Khedmati, "Vibration analysis of stiffened plates with initial geometric imperfections", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART M:Journal of Engineering for the Maritime Environment, October 2020
Vol. 235,
Num. 2,
Page 521-531,
October 2020,
7
Abbas Hasan Abadi, Karim Akbari Vakilabadi, Mohammad Reza Khedmati, "Analysis of the effect of corrosion on the residual tensile strength of aged ships plate using tensile testing", , October 2020
Vol. 7,
Num. 3,
Page 51-61,
October 2020,
8
Zorareh Nouri, Mohammad Reza Khedmati, "Progressive Collapse Analysis of an FPSO Vessel Hull Girder Under Vertical Bending Considering Different Corrosion Models", Journal of Marine Science and Application(JMSA), October 2020
Vol. 19,
Num. 4,
Page 674-692,
October 2020,
9
Mehdi Saloo, Mohammad Zaman Kabir, Mohammad Reza Khedmati, "Assessment of performance criteria of reinforced concrete beams retrofitted with FRP fabrics subjected to extreme impulsive loading", ADVANCED COMPOSITE MATERIALS, March 2020
Vol. 0,
Num. 0,
Page 1-23,
March 2020,
10
Rohallah Hadipourgodarzi, Mohammad Reza Khedmati, "An experimental and numerical investigation of adhesive bond strength in Al-GFRP single lap and double butt lap joints due to applied longitudinal loads", Ships and Offshore Structures, September 2019
Vol. 15,
Num. 4,
Page 1-14,
September 2019,
11
Masoud Pedram, Mohammad Reza Khedmati, Akbar Esfandiari, Hossein Kazem, "Damage detection in dolphin platform of a wharf by finite element model updating", Amirkabir Journal of Civil Engineering, August 2019
Vol. 51,
Num. 3,
Page 479-490,
August 2019,
12
Ashkan Babazadeh, Mohammad Reza Khedmati, "Semi-analytical simulation of plastic collapse mechanism of cracked continuous unstiffened plates used in ship structure under in-plane longitudinal compression", THIN-WALLED STRUCTURES, June 2019
Vol. 144,
Num. 0,
Page 106264-106264,
June 2019,
13
Ashkan Babazadeh, Mohammad Reza Khedmati, "Empirical formulations for estimation of ultimate strength of cracked continuous unstiffened plates used in ship structure under in-plane longitudinal compression", ENGINEERING FAILURE ANALYSIS, June 2019
Vol. 100,
Num. 6,
Page 470-484,
June 2019,
14
Milad Mohamadi, Mohammad Reza Khedmati, Ehsan Bahmyari, "Elastic local buckling strength analysis of stiffened aluminium plates with an emphasis on the initial deflections and welding residual stresses", Ships and Offshore Structures, February 2019
Vol. 14,
Num. 2,
Page 125-140,
February 2019,
15
Donya Najafzadeh, Saeed Shaikhzadeh Najar, Mohammad Reza Khedmati, "Experimental and theoretical analysis of air inflated circular woven fabric deformation", JOURNAL OF THE TEXTILE INSTITUTE, December 2018
Vol. 109,
Num. 1,
Page 1-10,
December 2018,
16
Karim Akbari Vakilabadi, Mohammad Reza Khedmati, Abbas Hasan Abadi, Alireza Mohammadi, "Resistance Prediction for a Novel Trimaran with Wave Piercing Bow", International Journal of Maritime Technology, December 2018
Vol. 9,
Num. 4,
Page 33-40,
December 2018,
17
Mahdi Omidali, Mohammad Reza Khedmati, "Numerical investigation on novel geometrical configuration for adhesively bonded T-joint between aluminum and sandwich panel", THIN-WALLED STRUCTURES, October 2018
Vol. 131,
Num. 10,
Page 122-134,
October 2018,
18
Ashkan Babazadeh, Mohammad Reza Khedmati, "Ultimate strength of cracked ship structural elements and systems: A review", ENGINEERING FAILURE ANALYSIS, July 2018
Vol. 89,
Num. 0,
Page 242-257,
July 2018,
19
Mahdi Omidali, Mohammad Reza Khedmati, "Reliability-based design of stiffened plates in ship structures subject to wheel patch loading", THIN-WALLED STRUCTURES, June 2018
Vol. 127,
Num. 6,
Page 416-424,
June 2018,
20
Karim Akbari, Mohammad Reza Khedmati, Abbas Hasanabadi, Alireza Mohammadi, "Resistance Prediction for a Novel Trimaran with Wave Piercing Bow", International Journal of Maritime Technology, February 2018
Vol. 9,
Num. 4,
Page 33-40,
February 2018,
21
Ehsan Bahmyari, Mohammad Reza Khedmati, Carlos Guedes Soares, "Stochastic analysis of coupled heave-roll ship motion using the domain decomposition chaotic radial basis function", OCEAN ENGINEERING, August 2017
Vol. 140,
Num. 8,
Page 322-333,
August 2017,
22
Najmeh Salemizadeh, Mohammad Reza Khedmati, "The Effect of Initial Defects, Corrosion and Cracks on The Ultimate Strength of a Bulk Carrier Ship", Iranian Journal of marine Science and Technology, June 2017
Vol. 81,
Num. 81,
Page 18-22,
June 2017,
23
Ehsan Bahmyari, Mohammad Reza Khedmati, "Uncertainty quantification in bending analysis of moderately thick plates with elastically restrained edges using the Chaotic Radial Basis Function", ACTA MECHANICA, June 2017
Vol. 228,
Num. 6,
Page 2083-2105,
June 2017,
24
Ali Dehghanian, Mohammad Reza Khedmati, Hassan Ghassemi, "PRACTICAL APPROACHES OF INDUCING CONTROLLED SIMULATED RESIN STARVATION AREAS INTO VACUUM INFUSION PROCESSED SANDWICH COMPOSITES USED FOR CHARACTERIZATION OF THE SURFACE DEFECTS AND THEIR OUTCOMES", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, June 2017
Vol. 14,
Num. 6,
Page 1170-1182,
June 2017,
25
Mahdi Omidali, Mohammad Reza Khedmati, Rohallah Hadipourgodarzi, "Numerical Investigation on Novel Method for Adhesively Bonded T-joint Between Aluminum and Sandwich Panel", Journal of Marine Science and Technology, May 2017
Vol. 16,
Num. 1,
Page 122-134,
May 2017,
26
Ehsan Bahmyari, Mohammad Reza Khedmati, "Stochastic analysis of thin plates on elastic foundation by combining the generalized polynomial chaos and element free Galerkin method", JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, April 2017
Vol. 31,
Num. 4,
Page 1813-1824,
April 2017,
27
Masoud Pedram, Akbar Esfandiari, Mohammad Reza Khedmati, "Frequency domain damage detection of plate and shell structures by finite element model updating", INVERSE PROBLEMS IN SCIENCE AND ENGINEERING, April 2017
Vol. 26,
Num. 4,
Page 1-33,
April 2017,
28
Ehsan Bahmyari, Mohammad Reza Khedmati, Carlos Guedes Soares, "Stochastic analysis of moderately thick plates using the generalized polynomial chaos and element free Galerkin method", ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS, March 2017
Vol. 79,
Num. 0,
Page 23-37,
March 2017,
29
Masoud Pedram, Akbar Esfandiari, Mohammad Reza Khedmati, "Damage detection by a FE model updating method using power spectral density: Numerical and experimental investigation", JOURNAL OF SOUND AND VIBRATION, February 2017
Vol. 397,
Num. 1,
Page 51-76,
February 2017,
30
Ashkan Babazadeh, Mohammad Reza Khedmati, "FINITE ELEMENT INVESTIGATION OF PERFORMANCE OF COMPOSITE-STEEL DOUBLE LAP ADHESIVE JOINT UNDER TENSILE LOADING", Latin American Journal of Solids and Structures, January 2017
Vol. 14,
Num. 2,
Page 277-291,
January 2017,
31
Majid Rashidi, Masoud Nazari, Mohammad Reza Khedmati, Akbar Esfandiari, "NUMERICAL MODELING OF CORROSION EFFECTS ON ULTIMATE STRENGTH OF DX TUBULAR JOINTS", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, December 2016
Vol. 14,
Num. 2,
Page 217-242,
December 2016,
32
Abdolhosein Mohammadrahimi, Mohammad Reza Khedmati, "Elastic Analysis of Plated Grillages in Ships’ Structures using Finite Element Method", Journal of Marine Science and Technology, April 2016
Vol. 15,
Num. 1,
Page 35-48,
April 2016,
33
Amirmozafar Benshams, Saman Shafeienejad, Mohammad Zaman Kabir, Farzad Hatami, Mohammad Reza Khedmati, Mesbah Sayehbani, "Investigate the Performance of SMA-FRP Composite Bars in Seismic Regions under Corrosion Conditions", World Academy of Science, Engineering and Technology, April 2016
Vol. 2016,
Num. 3,
Page 129-133,
April 2016,
34
Masoud Pedram, Akbar Esfandiari, Mohammad Reza Khedmati, "Finite element model updating using strain-based power spectral
density for damage detection", STRUCTURAL CONTROL & HEALTH MONITORING, February 2016
Vol. 23,
Num. 4,
Page 1-20,
February 2016,
35
Karim Akbari Vakil Abadi, Mohammad Reza Khedmati, Habib A. Sayyari, "Implementation Of Elastic Hinge For Structural Slender Ship Model Test In Towing Tank", , February 2016
Vol. 2,
Num. 2,
Page 54-64,
February 2016,
36
Rohallah Hadipourgodarzi, Mohammad Reza Khedmati, "AN EXPERIMENTAL INVESTIGATION OF STATIC LOAD CAPACITY OF AL-GFRP ADHESIVELY BONDED SINGLE LAP AND DOUBLE BUTT LAP JOINTS", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, August 2015
Vol. 12,
Num. 8,
Page 1583-1594,
August 2015,
37
Mohammad Reza Khedmati, Zorareh Nouri, "Analytical simulation of nonlinear elastic–plastic average stress–average strain relationships for un-corroded/both-sides randomly corroded steel plates under uniaxial compression", THIN-WALLED STRUCTURES, January 2015
Vol. 86,
Num. 1,
Page 132-141,
January 2015,
38
Karim Akbari Vakil Abadi, Mohammad Reza Khedmati, Mohammad Saeid Seif, "Experimental study on heave and pitch motion characteristics of a wave-piercing trimaran", TRANSACTIONS OF FAMENA, December 2014
Vol. 38,
Num. 3,
Page 13-26,
December 2014,
39
Pedram Edalat, Mohammad Reza Khedmati, Carlos Guedes Soares, "Free vibration of stiffened open shells with variable radii of curvature using extended Kantorovich–Ritz method", Ships and Offshore Structures, December 2014
Vol. 9,
Num. 11,
Page 1-14,
December 2014,
40
Abbas Bayatfar, Mohammad Reza Khedmati, Philippe Rigo, "Residual ultimate strength of cracked steel unstiffened and stiffened plates under longitudinal compression", THIN-WALLED STRUCTURES, November 2014
Vol. 84,
Num. 11,
Page 378-392,
November 2014,
41
Masoud Nazari, Mohammad Reza Khedmati, Amirfoad Khalaj, "A numerical investigation into ultimate strength and buckling behavior of locally corroded steel tubular members", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, November 2014
Vol. 11,
Num. 6,
Page 1063-1076,
November 2014,
42
Mohammad Reza Khedmati, Ahmadreza Rashedi, "Nonlinear finite element modeling and progressive collapse analysis of a product carrier under longitudinal bending", APPLIED OCEAN RESEARCH, October 2014
Vol. 48,
Num. 10,
Page 80-102,
October 2014,
43
Pouria Bahrami Ataabadi, Mohammad Reza Khedmati, Mostafa Bahrami Ataabadi, "Free Vibration Analysis of Orthtropic Thin Cylindrical Shells with Variable Thickness by Using Spline Functions", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, September 2014
Vol. 11,
Num. 12,
Page 2099-2121,
September 2014,
44
Fattaneh Morshedsolouk, Mohammad Reza Khedmati, "Parametric study on average stress–average strain curve of composite stiffened plates using progressive failure method", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, September 2014
Vol. 11,
Num. 12,
Page 2203-2226,
September 2014,
45
Mohammad Reza Khedmati, Hamid Reza Memarian, Manouchehr Fadavie, Mohammad Reza Zareei, "Ultimate strength of continuous stiffened aluminium plates under combined biaxial compression and lateral pressure", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, September 2014
Vol. 11,
Num. 15,
Page 20-34,
September 2014,
46
Mohsen Mohammadi, Mohammad Reza Khedmati, Karim Akbari Vakil Abadi, "Effects of hull damage on global loads acting on a trimaran ship", Ships and Offshore Structures, September 2014
Vol. 9,
Num. 12,
Page 1-12,
September 2014,
47
Mohammad Reza Khedmati, Hamid Reza Memarian, Manouchehr Fadavie, Mohammad Reza Zareei, "Empirical formulations for estimation of ultimate strength of continuous aluminium stiffened plates under combined transverse compression and lateral pressure", Ships and Offshore Structures, September 2014
Vol. 9,
Num. 12,
Page 1-10,
September 2014,
48
Ali Beygi Harchegani, Pedram Edalat, Mohammad Reza Khedmati, Manouchehr Fadavie, "A Numerical Investigation into the Crack Effects on the Natural Frequencies of the Plates", International Journal of Maritime Technology, September 2014
Vol. volume 2,
Num. 1,
Page 29-41,
September 2014,
49
Omid Ferdowsi Hossein Abadi, Mohammad Reza Khedmati, "Structural Analysis of an Aluminium High Speed Monohull using Finite Element Software", Iranian Journal of marine Science and Technology, August 2014
Vol. 70,
Num. 1,
Page 1-10,
August 2014,
50
Pedram Edalat, Mohammad Reza Khedmati, Carlos Guedes Soares, "Free vibration analysis of open thin deep shells with variable radii of curvature", MECCANICA, June 2014
Vol. 49,
Num. 6,
Page 1385-1405,
June 2014,
51
Mohammad Reza Khedmati, Masoud Pedram, "A numerical investigation into the effects of slamming impulsive loads on the elastic–plastic response of imperfect stiffened aluminium plates", THIN-WALLED STRUCTURES, March 2014
Vol. 76,
Num. 3,
Page 118-144,
March 2014,
52
Masoud Pedram, Mohammad Reza Khedmati, "The effect of welding on the strength of aluminum stiffened plates subject to combined uniaxial compression and lateral pressure", International Journal of Naval Architecture and Ocean Engineering, March 2014
Vol. 6,
Num. 1,
Page 39-59,
March 2014,
53
Mohammad Reza Khedmati, Masoud Pedram, Philippe Rigo, "The effects of geometrical imperfections on the ultimate strength of aluminium stiffened plates subject to combined uniaxial compression and lateral pressure", Ships and Offshore Structures, February 2014
Vol. 9,
Num. 1,
Page 88-109,
February 2014,
54
Yosef Amiriyan, Fattaneh Morshedsolouk, Mohammad Reza Khedmati, "Investigation of Post-Buckling Behaviour of Hat Stiffened Composite Plate Using Layers Death Method", , December 2013
Vol. 15,
Num. 36,
Page 1-12,
December 2013,
55
Mohammad Reza Khedmati, Mohammad Rezayi Sangtayi, Mehdi Fakori, "Stacking Sequence Optimisation of Composite Panels Subjected to Slamming Impact Loads using a Genetic Algorithm", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, September 2013
Vol. 10,
Num. 5,
Page 1043-1060,
September 2013,
56
Mohammad Reza Khedmati, Pedram Edalat, "Ultimate Strength Characteristics of a Ship’s Deck Stiffened Plate Structure in the Presence of Camber Parabolic Curvature", JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME, August 2013
Vol. 135,
Num. 3,
Page 1-10,
August 2013,
57
Pedram Edalat, Mohammad Reza Khedmati, Carlos Guedes Soares, "Free Vibration and Dynamic Response Analysis of Stiffened Parabolic Shells using Equivalent Orthotropic Shell Parameters", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, July 2013
Vol. 10,
Num. 4,
Page 747-766,
July 2013,
58
Mohammad Hossein Sadeghi, Mohammad Reza Khedmati, Amin Najafi, "Modelling of Blast Wave Loads Imposed on Ship Decks and Analysis of their Local Structural Response", , December 2012
Vol. 28,
Num. 1,
Page 47-56,
December 2012,
59
Zorareh Nouri, Mohammad Reza Khedmati, Shokoufeh Sadeghifard, "An effective thickness proposal for strength evaluation of oneside pitted steel plates under uniaxial compression", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, August 2012
Vol. 9,
Num. 4,
Page 475-496,
August 2012,
60
Mohammad Reza Zareei, Mohammad Reza Khedmati, Philippe Rigo, "Application of artificial neural networks to the evaluation of the ultimate strength of uniaxially compressed welded stiffened aluminium plates", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART M:Journal of Engineering for the Maritime Environment, July 2012
Vol. 226,
Num. 3,
Page 197-213,
July 2012,
61
Mohammad Hossein Sadeghi, Mohammad Reza Khedmati, "Simulation of Gun Wave Blast Load for Different Distances", Iranian Journal of marine Science and Technology, June 2012
Vol. 61,
Num. 1,
Page 1-9,
June 2012,
62
Mohammad Reza Khedmati, Zorareh Nouri, Mohammad Mehdi Roshanali, "A comparative computational investigation on the effects of randomly distributed general corrosion on the post-buckling behaviour of uniaxially loaded plates", JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, March 2012
Vol. 26,
Num. 3,
Page 767-783,
March 2012,
63
Shahed Jafarpour Hamedani, Mohammad Reza Khedmati, "Linear Vibration Analysis of Stiffened Plates", Iranian Journal of marine Science and Technology, February 2012
Vol. 18,
Num. 60,
Page 30-42,
February 2012,
64
Mohammad Reza Khedmati, Zorareh Nouri, Karim Moradi Dohezari, "A computational investigation of the effects of both-sides general corrosion on the buckling plastic collapse behaviour and strength of stiffened plates", JOURNAL OF MARINE SCIENCE AND TECHNOLOGY, February 2012
Vol. 17,
Num. 1,
Page 68-93,
February 2012,
65
Mohammad Reza Khedmati, Masoud Nazari, "A numerical investigation into strength and deformation characteristics of preloaded tubular members under lateral impact loads", MARINE STRUCTURES, January 2012
Vol. 25,
Num. 1,
Page 33-57,
January 2012,
66
Shahed Jafarpour Hamedani, Mohammad Reza Khedmati, Saeed Azkat, "Vibration analysis of stiffened plates using Finite Element Method", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, January 2012
Vol. 9,
Num. 1,
Page 1-20,
January 2012,
67
Pedram Edalat, Mohammad Reza Khedmati, "Elastic-Plastic Analysis Of Ship Bilge Plate Under In-Plane Uniaxial Compressive Load", , December 2011
Vol. 6,
Num. 12,
Page 17-27,
December 2011,
68
Mohammad Rezayi Sangtabi, Mohammad Reza Khedmati, Mehdi Fakori, "Optimization of stacking sequence for composite plates subjected to slamming impact load using genetic algorithm method", , September 2011
Vol. 7,
Num. 13,
Page 29-38,
September 2011,
69
Fattaneh Morshedsolouk, Mohammad Reza Khedmati, "An extension of coupled beam method and its application to study ship’s hull-superstructure interaction problems", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, September 2011
Vol. 8,
Num. 3,
Page 265-290,
September 2011,
70
Mehdi Fakori, Mohammad Reza Khedmati, Mohammad Rezayi Sangtayi, "Progressive Damage Analysis of Curved Marine Composite Sandwich Panels under Lateral Impact Pressure", , May 2011
Vol. 13,
Num. 27,
Page 63-73,
May 2011,
71
Mohammad Reza Khedmati, Iraj Kaivanfar, "A Computational Investigation on the Effects of Hull Geometry and Stiffeners on the Axial Crushing Strength and Behavior of Aluminum High Speed Crafts", JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME, April 2011
Vol. 133,
Num. 3,
Page 1-10,
April 2011,
72
Mohammad Reza Khedmati, Zorareh Nouri, Mohammad Mehdi Roshanali, "An effective proposal for strength evaluation of steel plates randomly corroded on both sides under uniaxial compression", STEEL AND COMPOSITE STRUCTURES, March 2011
Vol. 11,
Num. 3,
Page 183-205,
March 2011,
73
Mohammad Reza Khedmati, Mohammad Mehdi Roshanali, Zorareh Nouri, "Strength of steel plates with both-sides randomly distributed with corrosion wastage under uniaxial compression", THIN-WALLED STRUCTURES, March 2011
Vol. 49,
Num. 2,
Page 0-0,
March 2011,
74
Mohammad Reza Khedmati, Iraj Kaivanfar, "Crushing response of bow structure of aluminium high-speed crafts at the event of inclined collisions: numerical simulation", INTERNATIONAL JOURNAL OF CRASHWORTHINESS, October 2010
Vol. 15,
Num. 5,
Page 0-0,
October 2010,
75
Zorareh Nouri, Mohammad Reza Khedmati, Mohammad Mehdi Roshanali, "Degradation of the compressive strength of unstiffened/stiffened steel plates due to both-sides randomly distributed corrosion wastage", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, September 2010
Vol. 7,
Num. 3,
Page 0-0,
September 2010,
76
Mohammad Reza Khedmati, Pedram Edalat, "A numerical investigation into the effects of parabolic curvature on the buckling strength and behaviour of stiffened plates under in-plane compression", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, September 2010
Vol. 7,
Num. 3,
Page 0-0,
September 2010,
77
Mohammad Reza Khedmati, "Empirical formulations for estimation of ultimate strength of continuous stiffened aluminium plates under combined in-plane compression and lateral pressure", International Jouranl of Thin_ Walled Structures, March 2010
Vol. 48,
Num. 3,
Page 0-0,
March 2010,
78
Mohammad Reza Khedmati, "Post-buckling behaviour and strength of multi-stiffened
aluminium panels under combined axial compression and
lateral pressure", Marine Structures, February 2010
Vol. 23,
Num. 1,
Page 0-0,
February 2010,
79
Mohammad Reza Khedmati, Mohammad Reza Zareei, Philippe Rigo, "Sensitivity analysis on the elastic buckling and ultimate strength of continuous stiffened aluminium plates under combined in-plane compression and lateral pressure", , November 2009
Vol. 47,
Num. 11,
Page 0-0,
November 2009,
80
Mohammad Reza Khedmati, [en-name N/A], "A numerical assessment of the buckling/ultimate strength characteristics of stiffened aluminium plates with fixed/floating transverse frames", , November 2009
Vol. 47,
Num. 11,
Page 0-0,
November 2009,
81
Mohammad Reza Khedmati, [en-name N/A], Pedram Edalat, "static and dynamic structural analysis of aluminium craft deck structures, subjected to repeated impact load", , September 2009
Vol. 6,
Num. 3,
Page 0-0,
September 2009,
82
Mohammad Reza Khedmati, Pedram Edalat, [en-name N/A], "Sensitivity analysis of the elastic buckling of cracked plate elements under axial compression", , May 2009
Vol. 47,
Num. 5,
Page 0-0,
May 2009,
83
Mohammad Reza Khedmati, [en-name N/A], [en-name N/A], "Ultimate strength and ductility characteristics of intermittently welded stiffened plates", , March 2009
Vol. 65,
Num. 3,
Page 0-0,
March 2009,
84
Mohammad Reza Khedmati, [en-name N/A], "Ultimate strength and ductility characteristics of intermittently welded stiffened plates under in-plane axial compression", , February 2008
Vol. 130,
Num. 1,
Page 0-0,
February 2008,
85
Zorareh Nouri, Mohammad Reza Khedmati, "Review Study about the Underwater Explosion", Iranian Journal of marine Science and Technology, December 2007
Vol. 15,
Num. 46,
Page 34-40,
December 2007,
86
Mohammad Reza Khedmati, [en-name N/A], [en-name N/A], "Numerical Study on The Permissible Gap of Intermittent Fillet Welds of Longitudinally Stiffened Plates Under in Plane Axial Compression", , October 2007
Vol. 63,
Num. 10,
Page 0-0,
October 2007,
87
Mohammad Reza Khedmati, [en-name N/A], [en-name N/A], "A comparative study on three different construction methods of stiffened plates- strength behaviour and ductility characteristics", , June 2007
Vol. 60,
Num. 2,
Page 0-0,
June 2007,
88
[en-name N/A], Mohammad Reza Khedmati, "Numerical and Experimental Investigations on the Compression Behaviour of Stiffened Plates", , November 2006
Vol. 62,
Num. 11,
Page 0-0,
November 2006,
89
Mohammad Reza Khedmati, "Simulation of Average Stress_Average Strain Relationship of Ship Unstiffened /Stiffened Plates Subject to in _Plane Compression", , October 2005
Vol. 12,
Num. 4,
Page 0-0,
October 2005,
90
M. Fujikubo, T. Yao, Mohammad Reza Khedmati, Minoru Harada, D Yanagihara, "Estimation of Ultimate Strength of Continuous Stiffened Panel Under Combined Transverse Thrust and Lateral Pressure Part 1:Continuous Plate", , September 2005
Vol. 18,
Num. 0,
Page 0-0,
September 2005,
91
M. Fujikubo, Minoru Harada, T. Yao, Mohammad Reza Khedmati, D Yanagihara, "Estimation of Ultimate Strength of Continuous Stiffened Panel Under Combined Transverse Thrust and Lateral Pressure Part 2 :Continuous Stiffened Panel", , September 2005
Vol. 18,
Num. 0,
Page 0-0,
September 2005,
92
Mohammad Reza Khedmati, "Collapse behaviour of plates under thrust", , June 2004
Vol. 1,
Num. 1,
Page 0-0,
June 2004,
93
Mohammad Reza Khedmati, "Effects of initial imperfections on buckling/plastic collapse behaviour and stiffness of uniaxially loaded rectangular plates", , January 2003
Vol. 21,
Num. 0,
Page 0-0,
January 2003,
94
T. Yao, M. Fujikubo, Mohammad Reza Khedmati, "Progressive collapse analysis of a ship,s hull girder under longitudinal bending considering local pressure loads", , June 2000
Vol. 188,
Num. 0,
Page 0-0,
June 2000,
95
Mohammad Reza Khedmati, M. Fujikubo, D Yanagihara, T. Yao, "Buckling/plastic collapse behaviour and strength of continuous stiffened plates under combined biaxial thrust and lateral pressure", , May 2000
Vol. 100,
Num. 0,
Page 0-0,
May 2000,
96
M. Fujikubo, T. Yao, Mohammad Reza Khedmati, "Estimation of ultimate strength of ship bottom plating under combined transverse thrust and lateral pressure", , June 1999
Vol. 186,
Num. 0,
Page 0-0,
June 1999,
97
M. Fujikubo, T. Yao, Mohammad Reza Khedmati, "Estimation of ultimate strength of ship bottom plating under combined biaxial thrust and lateral pressure", , January 1999
Vol. 99,
Num. 0,
Page 0-0,
January 1999,
Conference Papers
Portal Records
1
Hossein Rahbarimanesh, Mohammad Reza Khedmati, "Review of practical corrosion models for oil tankers ", 21th Marine Industries Conference, January 2020
2
Sana Kouliyan, Mohammad Reza Khedmati, "An overview of buckling, bending and rupture in sandwich structures ", 21th Marine Industries Conference, January 2020
3
Hossein Rahbarimanesh, Mohammad Reza Khedmati, "Evaluation of the ultimate strength of a product tanker, taking into account the corrosion effect ", 21th Marine Industries Conference, January 2020
4
Fatemeh Barani, Mohammad Reza Khedmati, "Modeling and analysis of ship bottom structure when launching on airbags ", 21th Marine Industries Conference, January 2020
5
Mehdi Najafi, Mohammad Reza Khedmati, Mesbah Sayehbani, "Numerical simulation of the deformation of steel plates during forming process by line heating and investigation of factors affecting it ", 8th Iran International Conferenece on Materials Science & Metallurgical Engineering, October 2019
6
Saeed Shaikhzadeh Najar, Donya Najafzadeh, Mohammad Reza Khedmati, "Numerical and Theoretical Study of Circular Inflatable Fabric Deflection ", 15th Asian Textile Conference, ATC-15, September 2019
7
Mehdi Askari, Mohammad Reza Khedmati, "Numerical analysis of the effect of shearing on the transverse section of the ship on its ultimate strength under vertical bending ", 8th International Offshore Industries Conference, June 2019
8
Elahe Tavana, Mohammad Reza Khedmati, Masoud Nazari, "Evaluation of the static strength of the tubular connections with the inclusion of random pitting corrosion under compressive axial force ", 4th International Conference on Structural Engineering, February 2018
9
Mohammad Reza Khedmati, Mohammad Azimi Ghadikolaei, Masoud Nazari, "Investigation of the strength of tubular members of marine platforms with pitting corrosion under axial load and lateral impact ", 4th International Conference on Structural Engineering, February 2018
10
Mohammad Reza Khedmati, Mohammad Azimi Ghadikolaei, Masoud Nazari, "Evaluation of the ultimate strength of the tubular members of marine platforms including pitting corrosion ", 4th International Conference on Structural Engineering, February 2018
11
Shahed Jafarpoor Hamedani, Mohammad Reza Khedmati, Mehdi Iranmanesh, "Analysis of marine pipelines under the influence of peripheral loads during installation ", 19th International Marine Industries Conference, December 2017
12
Ali Dehghanian, Mohammad Reza Khedmati, Hassan Ghassemi, "Investigation of the effects of starvation on strength reduction of VIP-manufactured composite panels under inplane compression ", 18th Marine Industries Conference, October 2016
13
Mohamad Mazidi, Mohammad Reza Khedmati, "Estimation of welding distortion in but-welded plates with different sequences ", 18th Marine Industries Conference, October 2016
14
Majid Rashidi, Mohammad Reza Khedmati, Akbar Esfandiari, Masoud Nazari, "INVESTIGATION ON CORROSION EFFECTS ON ULTIMATE STRENGTH OF DX TUBULAR JOINTS ", 11th International Conference on Coasts, Ports and Marine Structures, October 2016
15
Mohammad Zaman Kabir, Mohammad Tolouei, Mohammad Reza Khedmati, "study on the effect of corrugated web girder angle on buckling capacity ", 1st National conference on applied research in structural engineering and construction management, September 2016
16
Mohammad Zaman Kabir, Mohammad Tolouei, Mohammad Reza Khedmati, "study on the effect of corrugated web girder on lateral-torsional buckling capacity ", 1st National conference on applied research in structural engineering and construction management, September 2016
17
Omid Ferdowsi Hossein Abadi, Mohammad Reza Khedmati, "Evaluation of ultimate strength of box girders simulating middle body of the ships ", 6th Conference on Steel & Structure, December 2015
18
Mehdi Saloo, Mohammad Zaman Kabir, Mohammad Reza Khedmati, Amin Moradi Momen, "The flexural and shear response of retrofitted RC beam by using FRP under explosion loading ", 3rd. international conference on civil Engineering, Architecture, and Urban Development, December 2015
19
Yousof Amirian, Moslem Najafi, Mohammad Reza Khedmati, "Numerical study of high velocity impact response of kevlar and glass woven fabrics ", 16th Marine Industries Conference, December 2014
20
Mohammad Reza Khedmati, Hamid Moaieri, Ali Amini, Hadi Tohidi, "Analysis of cracked plate under undex loading ", 16th Marine Industries Conference, December 2014
21
Omid Ferdowsi Hossein Abadi, Fattaneh Morshedsolouk, Mohammad Reza Khedmati, "Comparison of different models and methods for cost estimation in ship design process ", 16th Marine Industries Conference, December 2014
22
Mohammad Sadegh Hosein Poor, Masoud Pedram, Mohammad Reza Khedmati, "Application of fourier transformation to investigation of slamming pulse iterations on steel stiffened plates ", 16th Marine Industries Conference, December 2014
23
Mohammad Reza Khedmati, Mojtaba Shomali Varzande, Mesbah Sayehbani, "INVESTIGATING THE CORROSION DEFECTS ON STRENGTH OF SANDWICH PANELS COMPOSITE WITH FINITE ELEMENT METHOD ", 16th MARINE INDUSTRIES CONFERENCE, December 2014
24
Ebrahim Soleimani, Mohammad Reza Khedmati, Ali Mohammad Mirjalili, Ali Haji Abadi, "Stacking sequence optimisation of high speed crafts using genetic algorithms ", 16th Marine Industries Conference, December 2014
25
Ali Dehghanian, Mohammad Reza Khedmati, Hassan Ghassemi, "Effect of Dry Void Spaces on Reduction of Bending Strength of Composite Panes fabricated using VIP ", 16th Marine Industries Conference, December 2014
26
Mohammad Mahmoodi Salehabad, Mohammad Reza Khedmati, Omid Ferdowsi Hossein Abadi, "Ultimate strength of corroded stiffened box girder under pure bending ", 16th Marine Industries Conference, December 2014
27
Majid Rashidi, Mohammad Reza Khedmati, Akbar Esfandiari, Masoud Nazari, "Study of effect of thickness on the ultimate strength of a multiplanar tubular joint with corrosion ", The 11th International Conference on Coasts, Ports and Marine Structures, November 2014
28
Ehsan Bahmyari, Mohammad Reza Khedmati, Khosrow Ghavami, "Stochastic bending analysis of thin plates on elastic foundation using generalized polynomial chaos and element free galerkin method ", The 7th International Conference on Thin-Walled Structures, September 2014
29
Sepeh Rezapoor, Mohammad Reza Khedmati, Khosrow Ghavami, "Modeling and Analysis of Bamboo Space Structures using Finite Element Method ", The 4th National Conference on Spatial Structures, May 2014
30
Sepehr Rezapoor, Mohammad Reza Khedmati, "FGM Finite Element Model for Determination of Stress Distribution in Bamboo Simple Support Connection ", First National Conference of Architecture, Civil engineering, Urban Evironment, May 2014
31
Omid Ferdowsi Hossein Abadi, Mohammad Reza Khedmati, "Software for Modeling and Analysis of Monohull High Speed Crafts using Finite Element Method ", 15th Marine Industries Conference, October 2013
32
Ashkan Babazadeh, Mohammad Reza Khedmati, "Numerical Investigation into the Effects of Overlap Length on Mechanical Behaviour of Double-Lap Composite-Aluminium Adhesive Joint under Tensile Loading ", 15th Marine Industries Conference, October 2013
33
Ali Dehghanian, Mohammad Reza Khedmati, Hassan Ghassemi, Ashkan Babazadeh, "Initial Imperfections during Manufacturing Composite Ship Hulls: Review Study ", 15th Marine Industries Conference, October 2013
34
Moslem Zebardast, Mohammad Reza Khedmati, "Investigation of Strength of Unstiffened Flat Plate subject to Penetration ", 15th Marine Industries Conference, October 2013
35
Ali Dehghanian, Mohammad Reza Khedmati, Hassan Ghassemi, "Investigation into the Effects of Initial Imperfections induced in VIP Manufacturing on the Strength of Composite Ship Hulls ", 15th Marine Industries Conference, October 2013
36
Moslem Najafi, Yosef Amiriyan, Mohammad Reza Khedmati, "Investigation of Buckling and Interlaminar Delamination in Composite Stiffened Plates usder Low Speed Impact ", 15th Marine Industries Conference, October 2013
37
Mohammad Reza Khedmati, Philippe Rigo, Amrane, Amirouche, Masoud Nazari, "ASSESSMENT OF FATIGUE RELIABILITY FOR JACKET-TYPE OFFSHORE PLATFORMS CONSIDERING DYNAMIC BEHAVOIR ", ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering OMAE 2013, June 2013
38
Mohsen Khabir, Mohammad Reza Khedmati, Masoud Pedram, Manouchehr Fadavie, "Investigation into Hydroelasticity of Water Impact on Offshore Structures; theories and applications ", 5th Offshore Industrial Conference, May 2013
39
Masoud Nazari, Abbas Rajabi, Mohammad Reza Khedmati, "The methodology of fatigue reliability assessment for marine structures and a case study ", 5th Offshore Industries Conference, May 2013
40
Dariush Maleki, Masood Nazari, Mohammad Reza Khedmati, "Nonlinear Analysis and Analytical Derivation of Ultimate Strength of Multiplanar XX Tubular Joints ", 14th Marine Industries Conference (MIC2012), December 2012
41
Korosh Tafi, Masood Nazari, Mohammad Reza Khedmati, "Investigation into the Nonlinear Buckling of Jackup Legs ", 14th Marine Industries Conference (MIC2012), December 2012
42
Pouria Bahrami Ataabadi, Mohsen Eslami, Mohammad Reza Khedmati, Mostafa Bahrami, "free vibration analysis of parabolic stiffened shell by using finite element B-spline based ", 2nd International Conference on Acoustics and Vibration, December 2012
43
Mahdi Omidali, Mohammad Reza Khedmati, Rohallah Hadipourgodarzi, "Numerical Analysis of New Method of Adhesive Joint between Aluminium and Sandwich Panels ", 14th Marine Industries Conference (MIC2012), December 2012
44
Moslem Zebardast, Fattaneh Morshedsolouk, Mohammad Reza Khedmati, "Progressive Collapse Analysis of Composite Plates Stiffened with Hat-type Stiffeners under Longitudinal Compression ", 14th Marine Industries Conference (MIC2012), December 2012
45
Mohsen Mohammadi, Mohammad Reza Khedmati, Karim Akbari Vakil Abadi, "Stability Performance Analysis of a Wave Piercing Trimaran in Intact and Damaged Conditions ", 14th Marine Industries Conference (MIC2012), December 2012
46
Mohsen Mohammadi, Karim Akbari Vakil Abadi, Mohammad Reza Khedmati, "Estimation and Investigation into the Hydrodynamic Loads on a Trimaran Vessel under Intact and Damaged Conditions ", 14th Marine Industries Conference (MIC2012), December 2012
47
Pouria Bahrami Ataabadi, Mohammad Reza Khedmati, Manouchehr Fadavie, "Determination of equivalent orthotropic parameters of parabolic stiffened curved shell ", 14th Marine Industries Conference, December 2012
48
Mohammad Reza Khedmati, Mohsen Dehghani Tafti, "Calculation of Buckling Load for a Double Skin Structure with the aid of Orthotropic Plate Approach and Comparison of Results with the Results of Finite Element Method and Experiment ", 14th Marine Industries Conference (MIC2012), December 2012
49
Mohammad Reza Khedmati, Mohsen Drhghani Tafti, "Calculation of Buckling Load for a Double Skin Structure with the aid of Orthotropic Plate Approach and Comparison of Results with the Results of Finite Element Method and Experiment ", 14th Marine Industries Conference (MIC2012) iran, December 2012
50
Mohammad Reza Khedmati, Masoud Nazari, Amirfoad Khalaj, "Effect of corrosion on load carrying capacity and buckling behavior of locally corroded offshore tubular members ", The 10th International Conference on Coasts, Ports and Marine Structures (ICOPMAS 2012), November 2012
51
Mohammad Mehdi Mobasheri Zafarabadi, Mohammad Reza Khedmati, Pedram Edalat, "Free vibration parametric study and derivation of empirical formula for estimating the first five natural frequencies of unstiffened shells with parabolic curvature ", 1st International Conference on Acoustics and Vibration, December 2011
52
Fattaneh Morshedsolouk, Mohammad Reza Khedmati, Mohammadhossin Vatandost Khalilabad, "Reliability analysis of the SPD12 fixed platform ", 13th marine industry conference, November 2011
53
Hamid Reza Memarian, Mohammad Reza Khedmati, Mohammad Reza Zareei, "Analysis of stiffened aluminium plates under combined bi-axial compression and lateral pressure and derivation of the ultimate strength formula ", 13th marine industry conference, November 2011
54
Mohammad Reza Khedmati, Karim Akbari Vakil Abadi, "Structural similarity laws for testing marine vehicle models ", 13th marine industry conference, November 2011
55
Yosef Amiriyan, Mohammad Reza Khedmati, Fattaneh Morshedsolouk, "Study of the post-buckling and failure of stiffened composite panels using the numerical method and death of laminates ", 13th marine industry conference, November 2011
56
Mohammad Reza Khedmati, Masoud Pedram, Manouchehr Fadavie, Ali Reza Pedram, "Investigation of the effect of initial imperfection on ultimate strength of Aluminium panels under longitudinal compressions
um ", 13th Marine industries conference (MIC2011), November 2011
57
Mohammad Hossein Sadeghi, Mohammad Reza Khedmati, Manouchehr Fadavie, "Gun wave blast load modeling ", 11th marine industries conference, November 2011
58
Ashkan Babazadeh, Mohammad Reza Khedmati, Manouchehr Fadavie, "Rubber tensile test ", MIC2011, November 2011
59
Yosef Amiriyan, Mohammad Reza Khedmati, Fattaneh Morshedsolouk, "Investigation of the affecting parameters on the post-buckling behaviour and progressive failure of composite plates with hat-type stiffeners ", 13th marine industry conference, November 2011
60
Mohammad Mehdi Mobasheri Zafarabadi, Mohammad Reza Khedmati, Pedram Edalat, Manouchehr Fadavie, "Investigation of effect of Parametere on free vibration of reinforce cylinder with hyperbolic bend ", 13th Marine Industries conference (MIC2011), November 2011
61
Masoud Pedram, Mohammad Reza Khedmati, "studying the effect of slamming on stiffened aluminum panel,considering initial imperfections ", 13th marine industry conference, November 2011
62
Ali Beygi Harchegani, Mohammad Reza Khedmati, Pedram Edalat, Manouchehr Fadavie, "Investigation of the crack effect on natural frequency of Vibrated plate ", 13th Marine industries conference (MIC2011), November 2011
63
Mohsen Mohammadi, Mahdi Omidali, Mohammad Reza Khedmati, Mohammad Reza Zareei, "Investigation into the effects of torsional moment on a composite catamaran using Finite Element Method ", 13th marine industry conference, November 2011
64
Masoud Pedram, Mohammad Reza Khedmati, Modjtaba Kaboodvandy Rad, Manouchehr Fadavie, "hnvestigation of the effect of initial imperfection of on ultimate strength of aluminium panels under longitudinal and transverse pressure ", 13th Marine Industries Conference (MIC2011), November 2011
65
Mohammad Reza Khedmati, Mohammad Javad Ketabdari, Navid Mohammadipour, Hamid Arabzadeh, "The behavior of reinforced concrete slabs due to explosion waves ", The first national congress of Structure - Earthquake-Geotechnics, December 2010
66
Shahed Jafarpour Hamedani, Mohammad Reza Khedmati, "Review of Optimization Methods for Ship Structural Arrangements ", Marine Industries Conference 2010, October 2010
67
Sepideh Jafar Zadeh, Mohammad Reza Khedmati, Ahmadreza Rashedi, Zorareh Nouri, "Ultimate Strength Calculations and Derivation of Progressive Collapse Modes for a Box Girder Model ", Marine Industries Conference 2010, October 2010
68
A. Mohammad Rahimi, Mohammad Reza Khedmati, "Elastic Analysis of Plate Grillages in Ship Structures by Numerical Methods ", , October 2010
69
Ahmadreza Rashedi, Mohammad Reza Khedmati, Sepideh Jafar Zadeh, Zorareh Nouri, "Progressive Collapse Analysis of Nishihara Box Models ", Marine Industries Conference 2010, October 2010
70
Masoud Pedram, Mohammad Reza Khedmati, "Determination of Load Distribution and Evaluation of Structural Response of Ships under Slamming Induced Impacts: A Review ", Marine Industries Conference 2010, October 2010
71
Mohammad Mehdi Mobasheri Zafarabadi, Mohammad Reza Khedmati, Pedram Edalat, "Investigations into the Effects of Parabolic Curvature on Natural Frequencies of Unstiffened Plates applied in Ship Hull Structures ", Marine Industries Conference 2010, October 2010
72
Mohammad Hossein Sadeghi, Mohammad Reza Khedmati, Mehdi Fakori, Mohammad Rezayi Sangtayi, "Finite Element Analysis of Aluminium Ships Decks subjected to Gun Blast Loads ", Marine Industries Conference 2010, October 2010
73
Mohammad Reza Khedmati, Ali Beygi Harchegani, Pedram Edalat, "Investigations into Free Vibration of Plates and Effects of Crack on it ", Marine Industries Conference 2010, October 2010
74
Hamid Reza Memarian, Mohammad Reza Khedmati, Mohammad Reza Zareei, "Ultimate Strength Analysis of Stiffened Aluminium Plates under Combined Transverse Compression and Lateral Pressure ", Marine Industries Conference 2010, October 2010
75
Fattaneh Morshedsolouk, Mohammad Reza Khedmati, Saeeid Nikoyi, "Parametric Study of Mid-Length Superstructures on Longitudinal Strength of Ships ", Marine Industries Conference 2010, October 2010
76
Shahed Jafarpour Hamedani, Mohammad Reza Khedmati, "Vibration of Stiffened Shells: A Review Study ", Marine Industries Conference 2010, October 2010
77
Mohammad Reza Khedmati, "Strength characteristics of two side corroded steel plates subjected to in plane compression ", , November 2009
78
Mohammad Reza Khedmati, Mohammad Mehdi Roshanali, "A proposal on effective thickness for strength evaluation of corroded steel plates under in plane compression ", , November 2009
79
Mohammad Mehdi Roshanali, Mohammad Reza Khedmati, "Computation of ultimate compressive strength of plate with two side randomly distributed corrosion wastage ", , November 2009
80
Saeideh Abshenas, Hamid Sarlak Chivaee, Hassan Sayyadi, Mohammad Reza Khedmati, Mesbah Sayehbani, "gautomation nesting and cutting in marine industry with help of modifying similuated annealing ", first international industrial automation, October 2009
81
Masood Nazari, Mohammad Reza Khedmati, "Assessment of ultimate strength and deformation characteristics off pre loaded tubular members under lateral impact loads ", , May 2009
82
Masood Nazari, Mohammad Reza Khedmati, "Assessment of compressive strength and buckling behavior of locally correded tubular members ", , May 2009
83
Mojtaba Ghafari, Mohammad Reza Khedmati, "Numerical analysis of fluid-struction interaction in green sea ", The 8th International Conference on Coasts, Ports and Marine Structures, November 2008
84
Mohammad Reza Khedmati, Pedram Edalat, Mehran Rastani, "A numerical investigation into the effects of parabolic curvature on the buckling strength of deck stiffened plates ", the 36th solid mechanics conference, September 2008
85
Mohammad Reza Khedmati, Pedram Edalat, [en-name N/A], "Buckling collapse behaviour of cylindrical shells in blige region of ship hull girders under inplane compression ", , September 2008
86
Mohammad Reza Khedmati, "buckling collapse behaviour of cylindrical shells in bilge region of ship hull girders under inplane compression ", , September 2008
87
Mohammad Reza Khedmati, Pedram Edalat, [en-name N/A], "A Numerical investigation into the effects of parabolic curvature on the buckling strength of deck stiffened plates ", , September 2008
88
Mojtaba Ghafari, Mohammad Reza Khedmati, Mahmoud Ghiasi, "Investigation into fluid-structure impact considering damping effect of speed and structural flexibility ", 16th Annual (International) Conference on Mechanical Engineering, May 2008
89
Mohammad Reza Khedmati, "Buckling and Ultimate Strength Characteristics of Aluminium Stiffened Panels with Different Fixed/Floating Frames ", , December 2007
90
Mohammad Reza Khedmati, [en-name N/A], "A Study on the Ultimate Strength of a Tanker under Different Combinations of Vertical and Horizontal Bending Moments ", , October 2007
91
Mohammad Reza Khedmati, "A Numerical Study on the Ultimate Compressive Strength of Damaged Plate between Stiffeners ", , October 2007
92
Mohammad Reza Khedmati, "Post buckling behaviour of high strength aluminium alloy stiffened plates subjected to combined in plane compression and lateral pressure up to collapse ", , July 2007
93
Mohammad Reza Khedmati, "Buckling elastoplastic collapse analysis of corroded steel plates under in plane longitudinal compression ", , July 2007
94
Mohammad Reza Khedmati, "Direct stress analysis of high strength aluminium alloy deck structures subject to high speed impact loads ", , July 2007
95
Mohammad Reza Khedmati, "Crushing Characteristics of Aluminium High Speed Crafts at the Event of Inclined Bow Collisions ", , June 2007
96
Mohammad Reza Khedmati, "A Multi-Criteria Comparative Study on Ultimate Strength Formulations for Axially Loaded Stiffened Plates ", , June 2007
97
Mohammad Reza Khedmati, Mooud Nikfarjam, "Gun blast load modelling and structural respons analysis of stuffened plate structures ", , May 2007
98
[en-name N/A], Mohammad Reza Khedmati, "Sensitivity analysis on the buckling stringth of externally loaded stringer stiffened cylindrical shells ", , May 2007
99
[en-name N/A], Mohammad Reza Khedmati, "Analysis of lateral pressure effects on the Post-buckling behaviour of axially loaded stiffened aluminuim plates ", , May 2007
100
Mohammad Reza Khedmati, Iraj Kaivanfar, [en-name N/A], "Progressive crushing analysis of aluminium high speed crafts with particular reference to bow collisions: numerical investigation ", , October 2006
101
Mooud Nikfarjam, Mohammad Reza Khedmati, "Numerical strength analysis of unstiffened/stiffened ship plates under military
Blast loads ", , October 2006
102
Mohammad Reza Khedmati, "Parametric instability analysis on stringer stiffened circular cylindrical shells under axial compression/external hydrostatic pressure ", , August 2006
103
Mohammad Reza Khedmati, "Ultimate compressive strength of plate elements with randomly distributed corrosion wastage ", , August 2006
104
Mohammad Reza Khedmati, "Nonlinear elastoplastic behaviour of intermittently welded stiffened plates under inplane compression ", , June 2006
105
Mohammad Reza Khedmati, [en-name N/A], Mohammad Reza Zareei, "Sensitivity analysis on ultimate strength of stiffened aluminium plates under combined in-plane compression and lateral pressure ", , June 2006
106
[en-name N/A], Mohammad Reza Khedmati, "Numerical study on ultimate strength and behaviour of plate girders under shear ", , May 2006
107
Mohammad Reza Khedmati, ". Application of advanced iwum plate elements in collapse strength analysis of ship hull plates ", , May 2006
108
Mohammad Reza Khedmati, "A new design equation for estimation of the ultimate compressive strength of aluminum welded panels ", , May 2006
109
[en-name N/A], Mohammad Reza Khedmati, "Collapse behaviour of sttiffned plates in compression: experimental investigations versus finite element simulations ", , October 2005
110
[en-name N/A], Mohammad Reza Khedmati, "Numerical and experimental investigations on the compression behaviour of stiffened plates ", , June 2005
111
Mohammad Reza Khedmati, "Recent advence in the application of finite element method in marine structural design ", , May 2005
112
Mohammad Reza Khedmati, Abdollah Barzegar Bargahi, "Modelling longitudinally stiffenced plates for nonlinear elastoplastic response analysis ", , April 2005
113
Mohammad Reza Khedmati, Mohammad Esmaily, "New aluminum welding techno logies for manu facturing of ltigh speed crafts ", , April 2005
114
Mohammad Reza Khedmati, "Prevention of oil pollution in the event of ship collision or grounding _ new directions for bunker tanks ", , December 2004
115
Mohammad Reza Khedmati, [en-name N/A], "Ballast water exchange prodcedures problems and regulations ", , December 2004
116
Mohammad Reza Khedmati, Olfat Abplfazli, "Simulation of Average Stress _ Average Strain Relationships of Continuous plates Subjected to combined Biaxial Compression and lateral pressore . ", , June 2004
117
Mohammad Reza Khedmati, "Fabrication _ related initial imperfections in large steel plated structures ", , May 2004
118
Mohammad Reza Khedmati, "Effect of aspect ratio.hole shape and size on the elastic buckling behaviour of uniaxially loaded plastes with central holes ", , May 2003
119
Mohammad Reza Khedmati, "The effect of lateral pressure on the bucking/plastic collapse behaviour and strength of continuous stiffened plastes subject to biaxial compression ", , February 2003
120
Mohammad Reza Khedmati, "A parametric study of the buckling/plastic collapse behaviour and strength of continus stiffened plates under combined biaxial compression and lateral pressure ", , May 2002
121
Mohammad Reza Khedmati, "Some considerations on welding-induced imperfections for buckling/plastic collapse analysis of ship structural members and systems ", , March 2002
122
Mohammad Reza Khedmati, "Nonlinear Analysis of Continuous Plates Subjected to Combined Biaxial Compression and Lateral Pressure Based on Analytical Methods ", , February 2001
123
Mohammad Reza Khedmati, "An analysis of torsion in open ships ", , March 1995
Taught Courses
#
Course title
Description
Headlines
Date
1
Design of Ship Structures
Study of Different Topics related to Design of Ship Hull Structures
Fall 2023
2
Finite Element Method & Advanced Numerical Analysis
Introduction to Finite Element Method
Spring 2023
3
Ship Structures (I)
Study of ship structural components and their characteristics
Spring 2023
4
Design of Ship Structures
Study of Different Topics related to Design of Ship Hull Structures
Fall 2022
5
Finite Element Method & Advanced Numerical Analysis
Introduction to Finite Element Method
Spring 2022
6
Ship Structures (I)
Study of ship structural components and their characteristics
Spring 2022