1
Ahmad Ghiasvand, Eslam Ranjbarnoodeh, Seyed Ehsan Mirsalehi, "The microstructure and mechanical properties of
single-pass and double-pass lap joint of Al 5754H-
11 and Mg AZ31-O alloys by friction stir welding", Journal of Materials Research and Technology, March 2023
Vol. 23,
Num. 0,
Page 6023-6038,
March 2023,
2
Ali Nasajpour Esfahani, Ali Farzadi, Seyed Ehsan Mirsalehi, "Effect of diffusion brazing time on microstructure, isothermal solidification completion and microhardness distribution during joining of Nicrofer 5520 superalloy using a liquited Ni-Cr_B inretlayer", Journal of Materials Research and Technology, November 2022
Vol. 21,
Num. 0,
Page 1212-1222,
November 2022,
3
Behruz Bagheri Vanani, Ali Shamsipoor, , Seyed Ehsan Mirsalehi, "Investigation of SiC Nanoparticle Size and Distribution Effects on Microstructure and Mechanical Properties of Al/SiC/Cu Composite during the FSSW Process: Experimental and Simulation", METALS AND MATERIALS INTERNATIONAL, October 2022
Vol. -,
Num. 0,
Page 0-0,
October 2022,
4
Emad Cheraghi Rizi, Eslam Ranjbarnoodeh, Seyed Ehsan Mirsalehi, "Predicting the quantity and type of intermetallic phases in aluminum–steel dissimilar joints produced by zinc interlayer", Welding in the World, October 2022
Vol. 66,
Num. 11,
Page 0-0,
October 2022,
5
Behruz Bagheri Vanani, Medhi Alizadeh, Seyed Ehsan Mirsalehi, Ali Shamsipoor,, "The effect of rotational speed and dwell time on Al/SiC/Cu composite made by friction stir spot welding", Welding in the World, September 2022
Vol. 66,
Num. 0,
Page 2333-2350,
September 2022,
6
Behruz Bagheri Vanani, Medhi Alizadeh, Seyed Ehsan Mirsalehi, Ali Shamsipoor,, "Nanoparticles Addition in AA2024 Aluminum/Pure Copper Plate: FSSW Approach, Microstructure Evolution, Texture Study, and Mechanical Properties", JOM, September 2022
Vol. 74,
Num. 0,
Page 4420-4433,
September 2022,
7
Farshad Jafari, Eslam Ranjbarnoodeh, Seyed Ehsan Mirsalehi, "Finite element simulation of the effect of trailing heat sink on welding induced distortion of Al 3105", , September 2022
Vol. 54,
Num. 8,
Page 12-12,
September 2022,
8
Alireza Heidari Vaneghi, Behruz Bagheri Vanani, Ali Shamsipoor, Seyed Ehsan Mirsalehi,, "Investigations into the formation of intermetallic compounds during pinless friction stir spot welding of AA2024-Zn-pure copper dissimilar joints", Welding in the World, September 2022
Vol. 66,
Num. 0,
Page 2351-2369,
September 2022,
9
Ali Yaghoubi, Seyed Ehsan Mirsalehi, Amir Jamali, "Investigation on microstructure, mechanical properties and tribological behavior of AlZnMgCu1.5-T6/zirconia surface nanocomposites developed by FSP", Journal of Materials Research and Technology, August 2022
Vol. 20,
Num. 0,
Page 397-414,
August 2022,
10
Ali Amirnasiri, Seyed Ehsan Mirsalehi, "Effect of contact time parameter on wettability and interface phenomena of B4C substrate by Ni–Cr–Si–Fe–B–C filler alloy", CERAMICS INTERNATIONAL, July 2022
Vol. 48,
Num. 22,
Page 32777-32786,
July 2022,
11
Amir Jamali, Seyed Ehsan Mirsalehi, "Investigation on effects of traverse speed and number of passes on mechanical and abrasive properties of AA7075-T6/ZrO2 surface nanocomposite produced using friction stir processing", Welding in the World, July 2022
Vol. 0,
Num. 0,
Page 1-17,
July 2022,
12
Hamid Tazikeh, Seyed Ehsan Mirsalehi, Ali Shamsipoor, "Investigation of microstructure evolution of Inconel 939 joint diffusion brazed using an amorphous liquated Ni-Cr-Fe-Si-B interlayer", KOVOVE MATERIALY-METALLIC MATERIALS, June 2022
Vol. 60,
Num. 4,
Page 223-231,
June 2022,
13
Ahmad Malekan, Seyed Ehsan Mirsalehi, Mohammad Farvizi, Noritaka Saito, Konihiko Nakashima, "Microstructural evaluation of Hastelloy-X transient liquid phase bonded joints: Effects of filler metal thickness and holding time", TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, May 2022
Vol. 32,
Num. 5,
Page 1548-1558,
May 2022,
14
Ali Nasajpour Esfahani, Seyed Ehsan Mirsalehi, Ali Farzadi, "Diffusion brazing of Nicrofer 5520 (IN-617) superalloy using an amorphous Ni-Cr-Si-B interlayer: Microstructura characterization and mechanical properties", KOVOVE MATERIALY-METALLIC MATERIALS, May 2022
Vol. -,
Num. 0,
Page 0-0,
May 2022,
15
Hamid Tazikeh, Seyed Ehsan Mirsalehi, Ali Shamsipoor, "Relationship of isothermal solidification completion and precipitate formation with mechanical properties of Inconel 939 joints vacuum TLP bonded by an amorphous Ni-Cr-Fe-Si-B filler alloy", Journal of Materials Research and Technology, May 2022
Vol. -,
Num. 0,
Page 0-0,
May 2022,
16
Kambiz Moradi, Seyed Ehsan Mirsalehi, "Dissimilar Joining of Low-Carbon Steel to 6061-T6 Aluminum Alloy by Novel Method of Pinless Friction Stir Spot Welding-Brazing", METALS AND MATERIALS INTERNATIONAL, May 2022
Vol. -,
Num. 0,
Page 0-0,
May 2022,
17
Ali Nasajpour Esfahani, Seyed Ehsan Mirsalehi, Ali Farzadi, "Effect of Homogenization on Metallurgical Structure of Nicrofer 5520 (IN-617) Superalloy Joints Diffusion-Brazed Using a Ni–Cr–Si–B Interlayer", JOM, April 2022
Vol. -,
Num. 0,
Page 0-0,
April 2022,
18
Amir Jamali, Seyed Ehsan Mirsalehi, "Production of AA7075/ZrO2 nanocomposite using friction stir processing: Metallurgical structure, mechanical properties and wear behavior", CIRP Journal of Manufacturing Science and Technology, December 2021
Vol. -,
Num. 0,
Page 0-0,
December 2021,
19
Ali Amirnasiri, Seyed Ehsan Mirsalehi, "Investigation of interfacial reactions and wetting behavior of boron carbide
by AMS 4777 brazing alloy", CERAMICS INTERNATIONAL, October 2021
Vol. 47,
Num. 24,
Page 34414-34424,
October 2021,
20
Saleh Alaeibehmand, Seyed Ehsan Mirsalehi, Eslam Ranjbarnoodeh, "Pinless FSSW of DP600/Zn/AA6061 dissimilar joints", Journal of Materials Research and Technology, August 2021
Vol. 15,
Num. 0,
Page 996-1006,
August 2021,
21
Hamid Tazikeh, Seyed Ehsan Mirsalehi, Ali Shamsipoor, "The effect of bonding temperature on the microstructure and mechanical properties of 939 super alloy by transient liquid phase bonding method", Journal of Welding Science and Technology of Iran, August 2021
Vol. 7,
Num. 1,
Page 81-88,
August 2021,
22
Saleh Alaeibehmand, Eslam Ranjbarnoodeh, Seyed Ehsan Mirsalehi, "Joining mechanism in pinless FSSW of aluminum-steel with or without Zn and brass interlayer", MATERIALS CHARACTERIZATION, August 2021
Vol. 180,
Num. 111400,
Page 1-10,
August 2021,
23
, Behruz Bagheri Vanani, Mahmoud Abbasi, Farzaneh Sharifi, Seyed Ehsan Mirsalehi, Ahmad Ostovari Moghaddam, "A modified version of friction stir welding process of aluminum alloys: Analyzing the thermal treatment and wear behavior", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, July 2021
Vol. 235,
Num. 10,
Page 2291-2309,
July 2021,
24
Farhad Bakhtiari, Ali Shamsipoor, Seyed Ehsan Mirsalehi, "Preparation of bimetallic nano-composite by dissimilar friction stir welding of copper to aluminum alloy", TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, April 2021
Vol. 31,
Num. 5,
Page 1363-1380,
April 2021,
25
Amirhossein Sadeghian, Seyed Ehsan Mirsalehi, Farzam Arhami, Ahmad Malekan, Noritaka Saito, Konihiko Nakashima, "Effect of Bonding Time on Dissimilar Transient Liquid Phase (TLP) Bonding of IN939 to IN625 Superalloys: Microstructural Characterization and Mechanical Properties", METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, March 2021
Vol. 52A,
Num. 0,
Page 1526-1539,
March 2021,
26
Mohammadreza Amelzadeh, Seyed Ehsan Mirsalehi, "Dissimilar joining of WC-Co to steel by low-temperature brazing", MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, September 2020
Vol. 259,
Num. 0,
Page 114597-0,
September 2020,
27
Behruz Bagheri Vanani, Mahmoud Abbasi, , Seyed Ehsan Mirsalehi, "Effect of second-phase particle size and presence of vibration on AZ91/SiC surface composite layer produced by FSP", TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, April 2020
Vol. 30,
Num. 4,
Page 905-916,
April 2020,
28
Behrooz Rahmatian, Kamran Dehghani, Seyed Ehsan Mirsalehi, "Effect of adding SiC nanoparticles to nugget zone of thick AA5083
aluminium alloy joined by using double-sided friction stir welding", Journal of Manufacturing Processess, April 2020
Vol. 52,
Num. 0,
Page 152-164,
April 2020,
29
Ahmad Malekan, Mohammad Farvizi, Seyed Ehsan Mirsalehi, Noritaka Saito, Konihiko Nakashima, "Holding time influence on creep behavior of transient liquid phase bonded joints of Hastelloy X", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, January 2020
Vol. 772,
Num. 0,
Page 138694-0,
January 2020,
30
Ahmad Malekan, Mohammad Farvizi, Seyed Ehsan Mirsalehi, Noritaka Saito, Kunihiko Nakashima, "Effect of bonding temperature on the microstructure and mechanical properties of Hastelloy X superalloy joints bonded with a Ni–Cr–B–Si–Fe interlayer", Journal of Manufacturing Processess, October 2019
Vol. 47,
Num. 0,
Page 129-140,
October 2019,
31
Mohsen Ataei, Ali Shamsipoor, Seyed Ehsan Mirsalehi, "Microstructural characterization and mechanical properties of diffusion-brazed AZ91C magnesium alloy to 316L stainless steel", KOVOVE MATERIALY-METALLIC MATERIALS, October 2019
Vol. 57,
Num. 5,
Page 299-306,
October 2019,
32
Mohammadreza Amelzadeh, Seyed Ehsan Mirsalehi, "Dissimilar vacuum brazing of cemented carbide to steel using double-layer filler metals", Journal of Manufacturing Processess, September 2019
Vol. 47,
Num. 0,
Page 1-9,
September 2019,
33
Amirhossein Sadeghian, Farzam Arhami, Seyed Ehsan Mirsalehi, "Phase formation during dissimilar transient liquid phase (TLP) bonding of IN-939 to IN-625 using a Ni-Cr-Fe-Si-B interlayer", Journal of Manufacturing Processess, August 2019
Vol. 44,
Num. 0,
Page 72-80,
August 2019,
34
Behrooz Rahmatian, Seyed Ehsan Mirsalehi, Kamran Dehghani, "Metallurgical and Mechanical Characterization of Double-Sided Friction Stir Welded Thick AA5083 Aluminum Alloy Joints", TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, July 2019
Vol. 0,
Num. 0,
Page 0-0,
July 2019,
35
Ali Kavousi Sisi, Seyed Ehsan Mirsalehi, "Effect of PWHT Larson–Miller Parameter on Mechanical Properties and Microstructure of Line Pipe Microalloyed Steel Joints", METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, June 2019
Vol. -,
Num. 0,
Page 0-0,
June 2019,
36
Ahmad Malekan, Mohammad Farvizi, Seyed Ehsan Mirsalehi, Noritaka Saito, Kunihiko Nakashima, "Influence of bonding time on the transient liquid phase bonding behavior of Hastelloy X using Ni-Cr-B-Si-Fe filler alloy", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, May 2019
Vol. 755,
Num. 0,
Page 37-79,
May 2019,
37
Nima Sharifi Asl, Seyed Ehsan Mirsalehi, Kamran Dehghani, "Effect of TiO2 nanoparticles addition on microstructure and mechanical properties of dissimilar friction stir welded AA6063-T4 aluminum alloy and AZ31B-O magnesium alloy", Journal of Manufacturing Processess, April 2019
Vol. 38,
Num. 0,
Page 338-354,
April 2019,
38
Saeed Aliakbari, Mostafa Ketabchi, Seyed Ehsan Mirsalehi, "Effect of Through-Thickness Friction Stir Processing Parameters on Weld Repair and Modification of Fusion-Welded AA6061 Aluminum Alloy", JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, April 2019
Vol. .0,
Num. 0,
Page 0-0,
April 2019,
39
Hamid Kabiri Renani, Seyed Ehsan Mirsalehi, "Optimization of FSW lap joining of pure copper using Taguchi method and grey relational analysis", Materials Research Express, February 2019
Vol. 6,
Num. 5,
Page 56525-0,
February 2019,
40
Farzam Arhami, Seyed Ehsan Mirsalehi, Amirhossein Sadeghian, Mohammad Hossein Johar, "The joint properties of a high-chromium Ni-based superalloy made by
diffusion brazing: Microstructural evolution, corrosion resistance and
mechanical behavior", Journal of Manufacturing Processess, December 2018
Vol. 0,
Num. 0,
Page 0-0,
December 2018,
41
Farhad Bakhtiari, Ali Shamsipoor, Seyed Ehsan Mirsalehi, "Dissimilar Joining of Pure Copper to Aluminum Alloy via Friction Stir Welding", Acta Metallurgica Sinica-English Letters, December 2018
Vol. 31,
Num. 11,
Page 1183-1196,
December 2018,
42
Mohammadreza Amelzadeh, Seyed Ehsan Mirsalehi, "Influence of braze type on microstructure and mechanical behavior of WCCo/
steel dissimilar joints", Journal of Manufacturing Processess, November 2018
Vol. 36,
Num. 0,
Page 450-458,
November 2018,
43
Farzam Arhami, Seyed Ehsan Mirsalehi, "The effect of heat treatment sequence on microstructure and mechanical properties of diffusion brazed IN-939 superalloy", JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, November 2018
Vol. 0,
Num. 0,
Page 0-0,
November 2018,
44
Ali Farzadi, Hassan Esmaeili, Seyed Ehsan Mirsalehi, "Transient liquid phase bonding of Inconel 617 superalloy: effect of filler metal type and bonding time", Welding in the World, October 2018
Vol. 63,
Num. 1,
Page 191-200,
October 2018,
45
Farzam Arhami, Seyed Ehsan Mirsalehi, Amirhossein Sadeghian, "Effect of bonding time on microstructure and mechanical properties of
diffusion brazed IN-939", JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, October 2018
Vol. 0,
Num. 0,
Page 0-0,
October 2018,
46
Farzam Arhami, Seyed Ehsan Mirsalehi, "Microstructural Evolution and Mechanical Properties
Evaluation of IN-939 Bonds Made by Isothermal
Solidification of a Liquated Ni-Cr-B Interlayer", METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, September 2018
Vol. 0,
Num. 0,
Page 0-0,
September 2018,
47
Sohrab Qahri Saremi, Seyed Ehsan Mirsalehi, Ali Shamsipoor, "Transient liquid phase bonding of AZ31 magnesium alloy: Metallurgical
structure and mechanical properties", Journal of Manufacturing Processess, August 2018
Vol. 35,
Num. 0,
Page 140-148,
August 2018,
48
Saeed Aliakbari, Mostafa Ketabchi, Seyed Ehsan Mirsalehi, "Through-thickness friction stir processing; a low-cost technique for fusion
welds repair and modi
fi
cation in AA6061 alloy", Journal of Manufacturing Processess, August 2018
Vol. 35,
Num. 0,
Page 226-232,
August 2018,
49
Reza Aliasgarian, Malek Naderi, Seyed Ehsan Mirsalehi, "Ablation mechanism of ZrB2-SiC coating for SiC-coated graphite under an oxyacetylene flame", SURFACE & COATINGS TECHNOLOGY, July 2018
Vol. 350,
Num. 0,
Page 511-518,
July 2018,
50
Reza Aliasgarian, Malek Naderi, Seyed Ehsan Mirsalehi, ُSaeed Safi, "The Ablation and Oxidation Behaviors of SiC Coatings on Graphite Prepared by Slurry Sintering and Pack Cementation", JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, April 2018
Vol. 0,
Num. 0,
Page 1-11,
April 2018,
51
Hassan Esmaeili, Seyed Ehsan Mirsalehi, Ali Farzadi, "Vacuum TLP bonding of Inconel 617 superalloy using Ni-Cr-Si-Fe-B filler metal: Metallurgical structure and mechanical properties", VACUUM, March 2018
Vol. 152,
Num. 0,
Page 305-311,
March 2018,
52
Reza Aliasgarian, Malek Naderi, Seyed Ehsan Mirsalehi, Saeed Safi, "The ablation behavior of ZrB2-SiC coating prepared by shrouded
plasma spray on SiC-coated graphite", JOURNAL OF ALLOYS AND COMPOUNDS, January 2018
Vol. 742,
Num. 0,
Page 797-803,
January 2018,
53
Hassan Esmaeili, Seyed Ehsan Mirsalehi, Ali Farzadi, "Effect of joining atmosphere in transient liquid phase bonding of Inconel 617 superalloy", METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, September 2017
Vol. 0,
Num. 0,
Page 0-0,
September 2017,
54
Sajad Shakerin, Vahid Maleki, Seyed Alireza Ziaie, Hamid Omidvar, Mohammad Reza Rahimipour, Seyed Ehsan Mirsalehi, "Microstructural and mechanical assessment of transient liquid phase bonded commercially pure titanium", CANADIAN METALLURGICAL QUARTERLY, July 2017
Vol. 56,
Num. 3,
Page 360-367,
July 2017,
55
Mohammadreza Amelzadeh, Seyed Ehsan Mirsalehi, "Investigation on effect of holding time in brazing of steel to
cemented carbide using Cu-Ag alloy filler metal", , February 2017
Vol. 2,
Num. 2,
Page 38-46,
February 2017,
56
Mostaan Lotfalian Saremi, Seyed Ehsan Mirsalehi, Ali Shamsipoor, "Investigation on Metallurgical Structure and Mechanical Properties of Dissimilar Al 2024/Cu FSW T-joints", TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, November 2016
Vol. 0,
Num. 0,
Page 0-0,
November 2016,
57
Eman Hejazi, Seyed Ehsan Mirsalehi, "Mechanical and metallurgical characterization of AA6061 friction stir welded joints using microhardness map", TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, September 2016
Vol. 26,
Num. 9,
Page 2313-2319,
September 2016,
58
Saleh Alaei Behmand, Seyed Ehsan Mirsalehi, Hamid Omidvar, Mohammad Ali Safarkhanian, "Interfacial and Mechanical Behavior of AA5456 Filling Friction-Stir-Welded Lap Joints Using Similar and Dissimilar Pins", METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, June 2016
Vol. 0,
Num. 0,
Page 0-0,
June 2016,
59
Eman Hejazi, Seyed Ehsan Mirsalehi, "Effect of pin penetration depth on double-sided friction stir welded joints of AA6061-T913 alloy", TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, April 2016
Vol. 26,
Num. 3,
Page 676-683,
April 2016,
60
Sajad Shakerin, Hamid Omidvar, Seyed Ehsan Mirsalehi, "The effect of substrates heat treatment on microstructural and mechanical evolution of transient liquid phase bonded IN-738 LC", MATERIALS & DESIGN, January 2016
Vol. 89,
Num. 1,
Page 611-619,
January 2016,
61
Sajad Shakerin, Hamid Omidvar, Seyed Ehsan Mirsalehi, "The effect of substrates heat treatment on microstructural and mechanical evolution of transient liquid phase bonded IN-738 LC", MATERIALS & DESIGN, October 2015
Vol. -,
Num. 0,
Page 0-0,
October 2015,
62
Saleh Alaei Behmand, Seyed Ehsan Mirsalehi, Hamid Omidvar, Mohammad Ali Safarkhanian, "Single- and double-pass FSW lap joining of AA5456 sheets with different thicknesses", MATERIALS SCIENCE AND TECHNOLOGY, July 2015
Vol. 0,
Num. 0,
Page 0-0,
July 2015,
63
Ali Kavousi Sisi, Seyed Ehsan Mirsalehi, "Prediction of microstructure and mechanical properties of line pipe welded joints based on hardness map", SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, July 2015
Vol. -,
Num. 0,
Page 0-0,
July 2015,
64
Mahdi Ahmadi, Seyed Ehsan Mirsalehi, "Investigation on microstructure, mechanical properties and corrosion behavior of AISI 316L stainless steel to ASTM A335-P11 low alloy steel dissimilar welding joints", MATERIALS AT HIGH TEMPERATURES, May 2015
Vol. 0,
Num. 0,
Page 0-0,
May 2015,
65
Saleh Alaei Behmand, Seyed Ehsan Mirsalehi, Hamid Omidvar, Ali Mohammad Safarkhanian, "Filling exit holes of friction stir welding lap joints using consumable pin tools", SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, April 2015
Vol. -,
Num. 0,
Page 0-0,
April 2015,
66
Ali Kavousi Sisi, Seyed Ehsan Mirsalehi, "Effect of post weld heat treatment on microstructure and mechanical properties of X52 linepipe HFIW joints", JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, February 2015
Vol. -,
Num. 0,
Page 0-0,
February 2015,
67
Hamid Reza Esfahani, Seyed Ehsan Mirsalehi, "Investigation on microstructure and mechanical properties of friction stir welded lap joints between commercially pure copper and St37-2 mild steel", Journal of Metallurgy and Materials Science, November 2014
Vol. 56,
Num. 4,
Page 231-238,
November 2014,
68
Seyed Ehsan Mirsalehi, Ali Mohammad Hadian, "Thermodynamic modelling of wetting in a B4C/Ni–Cr–Si system", MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, November 2010
Vol. 18,
Num. 8,
Page 85012-85025,
November 2010,
69
Seyed Ehsan Mirsalehi, Ali Mohammad Hadian, "Study of interface interactions in B4C/Ni–Cr–Si system", APPLIED SURFACE SCIENCE, November 2010
Vol. 257,
Num. 2,
Page 628-634,
November 2010,
70
Amir Hossein Kokabi, Seyed Ehsan Mirsalehi, "Fatigue life estimation of resistance spot welding joints using fracture mechanics", Journal of Welding Engineering, May 2005
Vol. 19,
Num. 19,
Page 18-24,
May 2005,