Majid Safar Johari - Amirkabir University of Technology

Special services: Faculty Members Students Graduates

Content

Pepole

Amirkabir University of Technology

Resume Service

Majid Safar Johari

Professor
Department of Textile Engineering
Textile Technology

Download PDF فارسی

Email:

mjohari

aut.ac.ir

Phone:

h-index (Scopus):

18.00

Citations (Scopus):

797

Supervised PhD Theses

Thesis title

Date

Theoretical and experimental analysis of tensile behavior and damage of hybrid braided composite structures

GHAZAL GHAMKHAR
Other Supervisor: HOSSEIN HOSSEINI TOUDESHKY

2022 Apr

modification of nanofibrous filter structure by pulsed lasers to increase filtration efficiency for nanoparticle removal

MARYAM SALEHI ESFANDARANI
Other Supervisor: REZA AMROLLAHI

2012 Jul

Supervised MSc Theses

Thesis title

Date

Feasibility study of producing hybrid nano/microfiber yarn in short spinning system

ALIREZA ALIKHANI KOPAE & MARYAM YOUSEFZADEH
Other Supervisor:

2023 Sep

braid process modeling to find the relationship between production parameters and produced braid geometry

SAEIDEH BARZEGARI
Other Supervisor: hadi dabiryan

2023 Sep

Impact of front and back top roller pressure and shore hardness of drafting zone of a ring frame on the quality of carded/combed cotton yarn

HABIB AMIRI SAVADROODBARI

2023 Jul

investigating the effect of hybridization on the tensile properties of composites reinforced with hybrid tubular braids

FATEMEH DOLATI & hadi dabiryan
Other Supervisor:

2023 Mar

investigating the effect of production factors on the performance of needle nonwoven filter with the ability to separate organic oil from water

NEGIN EBNABBAS

2022 Jun

Investigation the effect of different types and number of axial yarns on the normal and composite braided structure

RASOOL SHABANLOO & S.MOHAMMAD ETRATI
Other Supervisor:

2022 Jun

Investigating the effects of the number and types of core and axial yarns used in braided structure on their tensile behavior in both normal and composites modes

SONA MADADI & S.MOHAMMAD ETRATI
Other Supervisor:

2022 Jun

Effect of tubular braids parameters on torsional properties of reinforced composites

ELHAM SADAT MIRSHAFIEI

2021 May

Investigating the tensile properties of composite rods reinforced by tubular braids and comparing them with steel armatures of the same longitudinal weight

ALI SHAKERSOUREH

2020 Oct

Investigating the effect of tubular braided structure on the Poisson's ratio

MEHRDAD ARIANPOUR

2019 Oct

investigation the relation between hairiness measurement by sheirly and image processing technique

MAHMOUD SHOKOUHI

2017 Jul

Investigation and comparison of packing density of compact, solo and siro spun yarns

NEDA NAEIMI

2017 Jun

Investigation and comparison of wicking behavior of yarn produced by compact, solo and siro spun systems

ELHAM ZARIFI
Other Supervisor: S.MOHAMMAD HOSSEINI VARKIANI

2017 Jun

investigation the effect of some yarn parameters and production process on the elastic modulus of tubular braid

ELHAM ESKANDARI SHAHRABI
Other Supervisor: hadi dabiryan

2017 Jan

investigation of the hybrid structure on mechanical properties of braid with and without reinforcement with resin composite

MOQADDASEH AFZALI NANIZ

2016 Feb

effect of weave structure and core type on mechanical properties of tubular braid with and without reinforcement with resin composite

HEDIEH NOUGHABI

2016 Feb

Investigation the internal structure of compact yarn produced by Rocos spinning system

MARZIEH RAHIMI BAFRANI

2015 Jan

investigation the hairness of spun yarn produced by compact spinning system (Rocos

GHASEM HEIDARI

2014 Oct

Theoretical and experimental on the potential covering of core spun yarn produced by ring and Rocos spinning systems

FERESHTEH HEIDARPOUR SHAHREZA

2014 Oct

Investigation and comparison of core spun yarn properties produced by siro and compact spinning system (RoCoS

PARVANEH KHEIRKHAH BARZOKI

2014 Sep

Investigation effect of Hybrid structure of braids on tensile behavior

SHOKOOFEH GHASEMI

2013 Dec

Investigation of effect of mechanical parameters yarns on tensile strength of braids

SIMIN BAKHTIYARI

2013 Dec

..... Evolutions of Hairiness in Rotor Spun Yarns by using Neural Netwoks

VAHID GHORBANI

2013 Oct

investigating the effect of yarn packing density on wicking behavior of ring spun yarn

SEYED MOSTAFA TAHERI OTAGHSARA

2012 Oct

assessing appearance of fabrics knitted from siro.single two-fold yarns

MOHSEN TAGHVAIE

2011 Nov

comparision of mechanical properties of tublar braided composites with those of filament-wound structures

ZAHRA TADI BENI

2011 Oct

Investigation of the Effective Processing Factors for Improving the Dynamic Loading of the Carpet

FAEZEH AJAMIN

2010 Nov

Modeling of tensile and air permeability properties of needlr punched nonwoven using artificial neural networks

ZIENAB MOJAHEDIAN
Other Supervisor: S.MOHAMMAD HOSSEINI VARKIANI

2010 Nov

Analysis of Failure Mechanism in Compact , Solo and Siro Spun Yarns

PARHAM SOLTAN MOHMMADI

2010 Sep

The effect of spinning parameters on the physical properties of core spun yarns produce by the three strand modified method of spinning system

ROOHOLLAH MAHLOUJCHI

2010 Apr

Study and analysis the production of yarn from polyvinyl Alcohol nano fibers

MAHSA MOHITI ASLI
Other Supervisor: Aliakbar Gharehaghaji

2009 Jan

A study on the effect of the parameters in the fancy yarn production on the physical and mechanical properties of weft khitted fabrics

SHIMA DANESHVAR
Other Supervisor: ZAHRA KHORRAM TOUSSI

2008 Nov

Influence of some machine variables on Siro Spinning geometry

SAEED KOOCHAKZADEH
Other Supervisor: MOHAMMAD AMANI TEHRAN

2008 Nov

Investigation of the internal structure , physical and mechanical properties of the RoCoS yarn

ZAHRA SAKI
Other Supervisor: S.MOHAMMAD ETRATI

2008 Nov

Investigation of the some effective factores on the packing density of the ring spun yarn

MARYAM SALEHI ESFANDARANI

2008 Sep

EFFECT OF WINDING PROCESS ON YARN HAIRINESS AND REDUCING IT BY MEANS OF AIR JET

VEISS MASOODINIA

2007 Oct

Experimental investigation of the effect of modifying the structure of the pigtail guide ring, balloon control ring, and balloon control plates on reducing yarn lint in the ring spinning system

HANIYE MOHAMADI POUR

2025 Sep

Strengthening of fluid transmission hoses against internal pressure caused by fluid passage and cutting caused by sharp objects using three-axial braiding technology

SADAF KHANIZADEH
Other Supervisor: hadi dabiryan

2025 Aug

Journal Papers

H. Amiri Savadroodbari, M. Razbin, , M. Safar Johari, "Multi-objective optimization of speed frame parameters for polyester spun yarn using artificial intelligence and grey relational analysis", Scientific Reports, 2025 Oct vol. 15, no. , pp.1-17, 2025.

Mohsen Rezahasani, H. Amiri Savadroodbari, M. Razbin, M. Safar Johari, "Optimizing drawing frame variables to enhance polyester spun yarn quality using soft computing techniques", Scientific Reports, 2025 May vol. 0, no. 0, pp.1-15, 2025.

A. Shaker Soureh, M. Safar Johari, S. Khademilkhchi, "Investigating the effect of fiber arrangement on tensile properties of two-dimensional hybrid braided composite rods", Scientific Reports, 2025 Jan vol. 15, no. 3116, pp.1-16, 2025.

H. Amiri Savadroodbari, Milad Razbin, Mohsen Reza Hasani, M. Safar Johari, "Tuning drafting zone parameters for polyester yarn within a ring spinning system: modeling and optimization", Journal of The Textile Institute, 2024 May vol. 1, no. 1, pp.1-15, 2024.

G. Ghamkhar, M. Safar Johari, Mahdi Bodaghi, "Enhancing damage resistance in tubular triaxial hybrid braided composites: Innovative production and tensile modulus prediction with damage analysis", Polymer Composites, 2024 Mar vol. 4, no. 3, pp.1-14, 2024.

G. Ghamkhar, M. Safar Johari, H. Hosseini Toudeshky, Mahdi Bodaghi, "An experimentally validated model for predicting the tensile modulus of tubular biaxial and triaxial hybrid braids", Polymer Composites, 2022 Oct vol. 43, no. 12, pp.9000-9011, 2022.

G. Ghamkhar, M. Safar Johari, H. Hosseini Toudeshky, "An experimental and theoretical investigation into the effect of braiding angle and combination on a tensile modulus of the tubular biaxial hybrid braids", Journal of Industrial Textiles, 2022 Apr vol. 0, no. 0, pp.1-20, 2022.

M. Arianpour, M. Safar Johari, H. Dabiryan, "Investigation on Poisson's ratio of tubular braid's structure, considering different structural deformation regimes, Part 1: experimental study", Journal of The Textile Institute, 2021 Sep vol. 3, no. 40, pp.10-21, 2021.

G. Ghamkhar, M. Safar Johari, H. Hosseini Toudeshky, "A review of the different standard methods of measuring the tubular braiding angle", Aut Journal of Mechanical Engineering, 2021 Apr vol. 5, no. 5, pp.1-20, 2021.

M. Afzali Naniz, Mahdi Bodaghi, M. Safar Johari, Ali Zolfagharian, "Influence of Hybridization on Tensile Behaviors of Non-Absorbable Braided Polymeric Sutures", Polymers, 2020 Mar vol. 12, no. 3, pp.1-13, 2020.

M. Afzali Naniz, M. Safar Johari, "An experimental study of the fiber hybridization effect on the mechanical performance of the 2D braided tubular composites", Materials Research Express, 2019 Oct vol. 6, no. 11, pp.1-11, 2019.

M. Shanbeh, M. Safar Johari, Mohammad Zarrebini, Marcin Barburski, Agnieszka Komisarczyk, "Analysis of shear characteristics of woven fabrics and their interaction with fabric integrated structural factors", Journal of Engineered Fibers and Fabrics, 2019 Jul vol. 14, no. 3, pp.1-13, 2019.

M. Shanbeh, M. Safar Johari, Mohammad Zarrebini, Marcin Barburski, Agnieszka Komisarczyk, Mariusz Urbaniak, "Effect of a weft yarn spinning system on the shear characteristics of plain woven fabrics", Textile Research Journal, 2019 Jun vol. 90, no. 17, pp.1-14, 2019.

H. Noughabi, Morteza Vadood, M. Safar Johari, "Investigating the effect of pattern and core yarn on the mechanical properties of braids and braided composite", Materials Research Express, 2018 Jun vol. 5, no. 6, pp.20-35, 2018.

Morteza Wadood, V. Ghorbani, M. Safar Johari, "Predicting the Hairiness ofCotton Rotor Spinning Yarns by Artifical Inteligence", Journal of Textiles and Polymers, 2018 Jan vol. 6, no. 1, pp.15-21, 2018.

P. Kheirkhah Barzoki, Morteza Vadood, M. Safar Johari, "Multi Objective Optimization of Rotorcraft Compact Spinning Core-Spun Yarn Properties", Journal of Textiles and Polymers, 2018 Jan vol. 6, no. 1, pp.47-53, 2018.

P. Kheirkhah Barzoki, Morteza Vadood, M. Safar Johari, "Investigation the RoCoS Core Spun Compact Yarn Properties", Journal of Textiles and Polymers, 2017 Jun vol. 5, no. 2, pp.91-96, 2017.

Morteza Vadood, P. Kheirkhah Barzoki, M. Safar Johari, "Multi objective optimization of rotorcraft compact spinning system using fuzzy-genetic model", Journal of The Textile Institute, 2017 Apr vol. 1, no. 2, pp.1-7, 2017.

H. Dabiryan, M. Safar Johari, S. Bakhtiyari, E. Eskandari Shahrabi, "Analysis of the tensile behavior of tubular braides using energy method. partII:experimental study", Journal of The Textile Institute, 2017 Feb vol. 3, no. 2, pp.1-6, 2017.

P. Kheirkhah Barzoki, Morteza Vadood, M. Safar Johari, "Modeling the Properties of Core- Compact Spun Yarn Using Artificial Neural Network", Journal of Textiles and Polymers, 2016 Jul vol. 4, no. 2, pp.102-106, 2016.

M.J. Abgary, M. Safar Johari, Sanaz Hassanzadeh, "Effects of OE spinning parameters on cotton rotor-spun yarn hairiness", Indian Journal of Fibre and Textile Research, 2016 Jun vol. 41, no. 2, pp.129-137, 2016.

V. Ghorbani, Morteza Vadood, M. Safar Johari, "Prediction of polyester/cotton blended rotor-spun yarns hairiness based on the machine parameters", Indian Journal of Fibre and Textile Research, 2016 Mar vol. 41, no. 0, pp.19-25, 2016.

M. Vadood, M. Safar Johari, A. Rahai, "New Approach for Simulation of Hot Mix Asphalt; Numerical and Experimental", Journal of Mechanics, 2015 Dec vol. 31, no. 6, pp.701-711, 2015.

M. Vadood, M. Safar Johari, A. Rahai, "Developing a hybrid artifical neoral network-genetic alogorithm model to predict resilient modulus of polypropylene/polyester fiber- reinforced asphalt concrete", Journal of The Textile Institute, 2015 Nov vol. 106, no. 11, pp.1239-1250, 2015.

M. Vadood, M. Salehi Esfandarani, M. Safar Johari, "Developing a new suit sizing system using neural network", Journal of Engineered Fibers and Fabrics, 2015 Jul vol. 10, no. 2, pp.108-112, 2015.

H. Dabiryan, M. Safar Johari, "Analysis of the tensile behavior of tubular braids using energy method, part I: theoretical analysis", Journal of The Textile Institute, 2015 Jul vol. 0, no. 0, , 2015.

M. Vadood, M. Safar Johari, A. Rahai, "Relationship between fatigue life of asphalt concrete and polypropylene/polyester fibers using artificial neoral network and genetic alogorithm", Journal of Central South University, 2015 May vol. 22, no. 6, pp.1936-1946, 2015.

P. Soltani Mohammadi, M. Safar Johari, M.zarrebini, "Tomography based determination of transverse permeability in fibrous porous media", Journal of Industrial Textiles, 2015 Feb vol. 14, no. 5, pp.100-109, 2015.

M. Vadood, M. Safar Johari, A. Rahai, "Developing a hybrid artificial neural network-genetic algorithm model to predict resilient modulus of polypropylene/polyester fiber-reinforced asphalt concrete", Journal of The Textile Institute, 2014 Dec vol. 10, no. 2014, pp.1-12, 2014.

Zahra Tadi Bani, M. Safar Johari, Mohammad Saleh Ahmadi, "Comparison of the Post-Impact Behavior of Tubular Braided and Filament Wound Glass/Polyester Composites under Compression", Journal of Engineered Fibers and Fabrics, 2014 Jun vol. 9, no. 2, pp.140-145, 2014.

P. Soltani Mohammadi, M. Safar Johari, Mohammad Zarrebini, "Effect of 3D fiber orientation on permeability of realistic fibrous porous networks", Powder Technology, 2014 Jan vol. 254, no. 0, pp.44-56, 2014.

M. Salehi Esfandarani, M. Vadood, M. Safar Johari, "Simulation of Cake Formation for Nano-Fibrous Filter Media Using Image processing", Journal of Textiles and Polymers, 2014 Jan vol. 2, no. 1, pp.1-6, 2014.

M. Vadood, M. Safar Johari, A. Rahai, "Introducing a simple method to determine aggregate gradation of hot mix asphalt using image processing", International Journal of Pavement Engineering, 2014 Jan vol. 15, no. 2, pp.142-150, 2014.

S.M. Taheri Otaghsara, M. Vadood, M. Safar Johari, "Investigation the effect of yarn count and twist factor on the packing density and wicking height of lyocell ring spun yarns", Fibers and Polymers, 2013 Sep vol. 14, no. 9, pp.1548-1555, 2013.

P. Soltani Mohammadi, M. Safar Johari, "Effect of Using the New Solo-Siro Spun Process on Structural and Mechanical Properties of Yarns", Fibres and Textiles In Eastern Europe, 2013 Apr vol. 21, no. 0, pp.51-54, 2013.

Z. Tadi Beni, M. Safar Johari, Mohammad Saleh Ahmadi, "Comperession strenght of braided", , 2013 Apr vol. 3, no. 1, pp.11-16, 2013.

P. Soltani Mohammadi, J. Shahrabi, S. Asadi, E. Hadavandi, M. Safar Johari, "A study on siro, solo, compact, and conventional ringspun yarns. part lll: modeling fiber migration using modular adaptive neuro- fuzzy inference system", Journal of The Textile Institute, 2013 Jan vol. زورنال, no. 0, , 2013.

P. Soltani Mohammadi, M. Safar Johari, "Effect of strand spacing and twist multiplier on structural and mechanical properties of Siro-spun yarns", Fibers and Polymers, 2012 Dec vol. 13, no. 1, pp.110-117, 2012.

R. Mahloujchi, P. Soltani Mohammadi, M. Safar Johari, "The effect of spinning parameters on mechanical and physical properties of core-spun yarns produced by the three-strand modified method (TSMM)", Fibers and Polymers, 2012 Sep vol. 13, no. 7, pp.923-927, 2012.

M. Salehi Esfandarani, M. Safar Johari, R. Amrollahi, M. Karimi, "Surface modification of silica-PAN composite nanofibers induced by CO2-pulsed laser", Journal of Applied Polymer Science, 2012 Jul vol. 125, no. 2, pp.9-15, 2012.

P. Soltani Mohammadi, M. Vadood, M. Safar Johari, "Modeling Spun Yarns Migratory Properties Using Artificial Neural Network", Fibers and Polymers, 2012 Jun vol. 13, no. 9, pp.1190-1195, 2012.

M. Safar Johari, "A study on siro-, solo-, compact-, and conventional ring-spun yarns. Part II: yarn strength with relation to physical and structural properties of yarns", Journal of The Textile Institute, 2012 Jun vol. 103, no. 9, pp.921-930, 2012.

E.A. Haghighat, M. Safar Johari, S. Etrati, M. Amani Tehran, "Study of the Hairiness of Polyester - Viscose Blended Yarns . Part IV - Predicting Yarn Hairiness Using Fuzzy Logic.", Fibres and Textiles In Eastern Europe, 2012 Apr vol. 20, no. 0, pp.39-42, 2012.

M. Safar Johari, "A study on siro-, solo-, compact-, and conventional ring-spun yarns. Part I: structural and migratory properties of the yarns", Journal of The Textile Institute, 2012 Mar vol. 103, no. 6, pp.622-628, 2012.

E.A. Haghighat, M. Safar Johari, S. Etrati, M. Amani Tehran, "Study of the Hairiness of Polyester-Viscose Blended Yarns. Part III - Predicting Yarn Hairiness Using an Artificial Neural Network", Fibres and Textiles In Eastern Europe, 2012 Jan vol. 20, no. 1, pp.33-38, 2012.

P. Soltan Mohmmadi, M. Safar Johari, "A study on Siro-,Solo-,Compact-, and conventional ring-spun yarns.PartII:Yarn strength with relation to physical and Structural properties of yarns", Journal of The Textile Institute, 2011 Oct vol. 4, no. 2, pp.1-10, 2011.

P. Soltan Mohmmadi, M. Safar Johari, "A study on Siro-,Solo-,Compact-, and conventional ring-spun yarns.PartI:Structural and migratory properties of the yarns", Journal of The Textile Institute, 2011 Sep vol. ifirst,201, no. 2, pp.1-7, 2011.

A. Pourahmad Nodehi, M. Safar Johari, "Comparison of the properties of ring,solo,siro core-spun yarns", Journal of The Textile Institute, 2011 Jun vol. 102, no. 6, pp.540-547, 2011.

M.varsei, M. Safar Johari, S. Etrati, M.gorji, "Effect of double-nozzle jet on mechanical properties of interlaced self-twist yarn", World Applied Sciences Journal, 2011 Jun vol. 12, no. 1, pp.28-32, 2011.

M. Salehi Esfandarani, M. Safar Johari, R. Amrollahi, M. Karimi, "Laser Induced Surface Modification of Clay-Pan Composite Nanofibers", Fibers and Polymers, 2011 Apr vol. vol12, no. 0, pp.715-720, 2011.

M. Salehi Esfandarani, M. Safar Johari, "Study of Fiber Packing Density of Lyocell Ring-Spun Yarns", Journal of The Textile Institute, 2011 Feb vol. 102, no. 5, pp.389-394, 2011.

N. Mardani Mehrabad, M. Safar Johari, M. Mohammadi Aghdam, "Using Finite- Element Method for Analyzing the Effect of Coriolis Acceleration on the Ring- Spinning Balloon", Chemical, Polymer and Material Science and Technology, Amirkabir, 2011 Feb vol. سال بیست و, no. 72, pp.93-98, 2011.

M. Safar Johari, Ali Rezaian, H. Abedzade Atar, "Prioritizing of Main Factors in Motivation of Human Resources with using AHP In uncertain Condition(In Alyaf Co)", , 2010 Jul vol. 17, no. 41, pp.311-324, 2010.

M.S. Ahmadi, M. Safar Johari, M. Sadighi, "An experimental study on mechanical properties of GFRP braid-pultruded composite rods", Express Polymer Letters, 2009 Sep vol. 0, no. 9, , 2009.

N. Mardani Mehrabad, M. Safar Johari, M. Mohammadi Aghdam, "Finite-Element and Multivariate Analyses of Tension Distribution and Spinning Parameters Effects on the Ring-Spinning Balloon", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2009 Sep vol. 224, no. 2, , 2009.

A. Pourahmad Nodehi, M. Safar Johari, "Production of Core-Spun Yarn by The Three -Strand Modified Method", Journal of The Textile Institute, 2009 Apr vol. , no. 3, , 2009.

E. Haghighat, M. Safar Johari, S. Etrati, "Study of Hairiness of Polyester-Viscose Blended Yarns,PartII.Winding Section Parameters", Fibres and Textiles In Eastern Europe, 2008 Sep vol. , no. 3, , 2008.

E. Haghighat, M. Safar Johari, S. Etrati, "A Study of Hairiness of Polyester-Viscose Blended Yarns,Part1.Drafting System Parameters", Fibres and Textiles In Eastern Europe, 2008 Jun vol. , no. 2, , 2008.

E. Ekhtiyari Kasnaviyeh Yazd, M. Safar Johari, M. Abedi, "Digital control of ambient relative humidity for the measurement of electrical resistance of cashmere fiber", , 2002 Dec vol. , no. 27, , 2002.

E. Ekhtiyari Kasnaviyeh Yazd, M. Safar Johari, M. Abedi, "The effect of percentage of remaining hair breed and ambient relative humidity on electrical resistance of cashmere fiber", , 2002 Jul vol. , no. , , 2002.

M. Safar Johari, M. Latifi, M. Amani Tehran, H. Tajeri, "Measurement of Yarn Diameter and Hairiness by Means of Image Analysis System", Amirkabir Journal of Science & Technology, 1998 Jun vol. 0, no. 37, , 1998.

A.A. Asgharian Jeddi, M. Safar Johari, A.A. Marati, "A study of structural and physical properties of cotton covered nylon filament core spun yarns", Journal of The Textile Institute, 1997 Mar vol. , no. , , 1997.

A.A. Asgharian Jeddi, M. Safar Johari, A. Merati, "A Study of the Structural and Physical Properties of Cotton-Covered Nylon Filament Core-Spun Yarns", Journal of The Textile Institute, 1997 Jan vol. 88, no. 1, pp.12-20, 1997.

M. Safar Johari, "Finite - element and multivariate analyses of tension distribution and spinning parameter effects on a ring - spinning balloon", Journal of Mechanical Engineering Science.Part C, vol. 0, no. 2, , .

Taught Courses

Course title

Description

Headlines

Date

Structure Mechanics of Yarn

Fundamental investigation of structural mechanics of yarns

4051

Modern Spinning Systems

4042

Structural Mechanics of Yarns

4041

Modern Spinning Systems

4032

Inventions/Patents

Invention title

Reg. number

Country

contributers

Reg. date

Exp. date

Development of a New Method for Weaving Multi axis Three Dimensional Woven fabric

2014/07/1