MOHAMMAD REZA MOHADDES MOJTAHEDI - Amirkabir University of Technology

Melt spinning and investigation of microstructure and its effect on physical and mechanical properties of polyethylene terephthalate/polylactic acid blend fibers

MARYAM KHEYRANDISH

2024 Mar

effect of hot multistage drawing on microstructure and physical properties of nylon 6 multifilament yarn

ROHOLAH SEMNANI RAHBAR

2011 Sep

Theoretical and Experimental Study on Draw Ability of Filament Yarns Produced From Used Pet Bottle

MARJAN ABBASI

2008 Mar

Supervised MSc Theses

Thesis title

Date

The effect of linear density of filaments in polyester filament yarn on the physical properties of weft knitted fabric

MAHDI YADEGARI
Other Supervisor: NAZANIN EZAZSHAHABI

2024 Dec

comparing physical , microstructure and comfort properties of polyester solid and hollow filament yarns

FATEME EZATI
Other Supervisor: NAZANIN EZAZSHAHABI

2023 Oct

A study on some physical properties of polypropylene filament yarn blended with a low melt copolyester during the melt spinning process

RAYHANEH ASADI & Mohammadali Tavanei
Other Supervisor:

2023 Aug

The effect of intrinsic viscosity on the physical properties of polyester filament yarn

ELHAM JALALI
Other Supervisor: Mohammadali Tavanei

2023 Mar

Predicting the effect of Air Texturing process variables on the properties of textured yarn

ZOHREH MOHAMMADI YAZANI
Other Supervisor: MOHAMMAD AMANI TEHRAN

2022 Jul

Investigation of the physical and antimicrobial properties of melt spun PET yarn impregnated with nanosilver filled spin finish

MOJGAN HOMAYOUNFAR
Other Supervisor: Mohammadali Tavanei

2022 Mar

studying of physical and comfort properties fabric made of polyster filament yarn with grooved plus and circular filament cross section

MAHSA TALEBIPANAH

2021 Feb

Producing Investigating the physical and luminescence properties of nylon/phosphor strontium aluminate melt-spun luminescent

SOHEIL GHASEMI
Other Supervisor: S.HAJIR BAHRAMI

2020 Jun

Investigation of physical and micro-structure properties of filament yarns produced from the mixture of virgin and reused polypropylene

SARA RAHIMPOUR KALKHORAN

2019 Sep

Manufacturing and comparing the physical and microstructure properties of polyester filament yarn with grooved oval and circular cross section

MEHRAD BASTANI
Other Supervisor: FATEMEH DADASHIAN

2019 Feb

production and comparing the physical and microstructure properties of polypropylene filament yarn with grooved oval and circular filament cross section

ELNAZ ATAEI FARD
Other Supervisor: TAHEREH MOIENI

2018 Oct

Investigating the physical properties,microstructure and dyeability of polypropylene /modified Nanoclay nanocomposite filament yarn

SEYED MANSOUR MOUSAVI
Other Supervisor: PARVIZ NOURPANAH

2018 Oct

Fabrication of porous PET yarns by using sodium chloride and investigation their properties

NEDA AZIZIHA
Other Supervisor: AHMAD MOUSAVI SHOUSHTARI

2018 Oct

melt spinning of luminescence polyester nanocomposite fiber and studying physical properties of fibers

ALIREZA BASTANY & AHMAD MOUSAVI SHOUSHTARI
Other Supervisor:

2018 Feb

Investigating the physical / mechanical properties of polyporopylene porous melt spun filaments

SHAHRZAD BIDRAM & S.MOHAMMAD HOSSEINI VARKIANI
Other Supervisor:

2017 Dec

effect of drawing process on the physical properties and microstructures of poly(ethylene) terephthalate yarns containing modified clay nanoparticles

SEPIDEH KAZEMI MOGHADDAM
Other Supervisor: Mohammadali Tavanei

2017 Oct

production and Investigating the physical properties of polypropylene filament yarn containing filament with irregular blades section

MOSTAFA DEHESTANI

2017 Feb

Magnetic nanofibrous composite yarn fabrication from iron oxide and poly caprolactone using electrospinning technique

ROJIN MAREFAT & Aliakbar Gharehaghaji
Other Supervisor:

2017 Feb

Electrospinning PCL/Aloe vera and investigating nanofibrous antimicrobial properties

SOMAYEH BAGHERSAD & S.HAJIR BAHRAMI
Other Supervisor:

2016 Oct

investigating the physical properties of melt spun filament yarn from gamma radiated polypropylene

MARZIYEH HAJIBEYGI

2016 Feb

Determination of process condition for producing non - circular filament yarns

BATOUL IBRAHIMY ZADEH

2016 Feb

investigating the physical and structural properties of poly propylene / strontium aluminate melt - spun iuminous fiber

AMIN EBRAHIMZADE

2016 Feb

Producing of PAN/PEG phase change nano fibers containing of nano particles and investigation on their morphology and thermal behaviors

ZAHRA ESMAIELZADE & AHMAD MOUSAVI SHOUSHTARI
Other Supervisor:

2014 Oct

Investigating physical properties and microstructure of PP/PCM melt spun yarn

SAMA HASANI

2013 Oct

production of nano clay/polypropylene composite fibers and studies the effect of nano clay composition on their thermal physical properties

REZA FAGHIRI GHEYBGHOLI & AHMAD MOUSAVI SHOUSHTARI
Other Supervisor:

2013 Oct

comparing the physical structure and properties of needle punch nonwoven fabrics made up of fibers with different cross section in filter productions

SAMANEH FAKHIMI
Other Supervisor: S.MOHAMMAD HOSSEINI VARKIANI

2012 Oct

effects of simultaneous application of PP fiber and nano particles on physical and mechanical properties of fiber reinforced concrete

MOEIN MEHDIPOOR MIR MAHALE & AHMAD MOUSAVI SHOUSHTARI
Other Supervisor:

2012 Sep

investigating the structural,physical and antimaicrobial properties of polyamid6/nanosilver nanocomposite filament yarns

NAZANIN SHAFAEI
Other Supervisor: Aliakbar Gharehaghaji

2012 Feb

investigating the effect of temperature and time on the crimp development of false-twist textured yarn

MARJANALSADAT SAFISHAHI

2011 Nov

Investigating the Effect of Mixing Inorganic Nanofillers With Polyamide 6 on the U V Protection of Produced Fibers

SOMAYEH GHAFFARI

2011 Feb

Producing , Processing and Investigating Physical Properties of PET/Nanosilver Composite Filament Yarns

SHABNAM SHAHABI

2010 Nov

Production and Application of Cellulose Acetate- Nanosilver fibers in Tissue Engineering

MARZIEH GHAEMIZADEH & S.HAJIR BAHRAMI
Other Supervisor:

2009 Dec

investigating the effects of size of nozzle and stuffer box on the physical properties of B>C>F. polypropylene yarns

MARYAM SHAFAGHTIAN & S.MOHAMMAD ETRATI
Other Supervisor:

2009 Dec

Comparison of impact Resistance of semi isotropic reinforced with basalt and Glass fibers

REZA NATEGHI JAHROMI & S.HAJIR BAHRAMI
Other Supervisor:

2009 Nov

Predicting the color variation of dope-dyed polyester yarns via texturing process

BAHAREH AZIMI & MOHAMMAD AMANI TEHRAN
Other Supervisor:

2009 Oct

Investigating the changes in the fiber structure and physical properties of polyamide 6 subjected to the false twist texturing

MORTEZA NOEE

2009 Jan

EFFECTIVE FACTORS OF YARN FALSE TWIST TEXTURING ON THE WATER CAPILLARY PENETRATION

HOSSIEN MAHMODI MEABADI & NAHID ANSARI
Other Supervisor:

2007 Dec

INVESTIGATION ON THE EFFECT OF THE TYPE OF RAW MATERIAL AND SOME MELT SPINNING CONDITIONS ON THE PROPERTIES OF TEXTURED PET YARN

IMANEH IZADI & MIR HADI SEYED ESFAHANI
Other Supervisor:

2007 Oct

INVESTIGATION ON THE PHYSICAL PROPERTIES & FINE STRUCTURE DRAWABILIRTY & TEXTURABILIRITY OF MELT-SPUN FILAMENT YARNS PRODUCED FROM BLEND OF PP/OPP

AMIR GHASSEMI

2007 Oct

INVESTIGATION ON THE EFFECT OF BLENDING PPS HAVING DIFFERENT MOLECULAR WEIGHT DISTRIBUTIONS ON THE PHYSICAL PROPERTIES AND MICROSTRUCTURE OF MELT SPUN FILAMENT YARNS

ZAHRA TALEBI MAZREHESHAHI

2007 Oct

Study of the physical properties of low-melting temperature polyethylene terephthalate and copolyethylene multifilament blended yarn

AMIRMASOUD MIRASHEH
Other Supervisor: Mohammadali Tavanei

2025 Mar

Books

Title

Author(s)

Publisher country

publication date

version

Process of Fiber Production

M. Tavanei, M.R. Mohaddes Mojtahedi

Iran

Journal Papers

R. Seyedi, S. Shaikhzadeh Najar, M.R. Mohaddes Mojtahedi, "Characterization and Electromechanical Behavior of Developed PVDF Yarn and Fabric as Pressure Sensor", Acs Applied Electronic Materials, 2024 Aug vol. 6, no. 8, , 2024.

M. Kheyrandish, M.R. Mohaddes Mojtahedi, H. Nazokdast, "Assessing compatibility, tansesterification, and disintegration of PET/PLA fiber blend in composting conditions", Frontiers In Materials, 2023 Oct vol. 10, no. 10, pp.1-17, 2023.

M. Kheyrandish, M.R. Mohaddes Mojtahedi, H. Nazokdast, "Investigating of Transesterification and Properties of Polyethylene Terephthalate/Polylactic Acid Blend Film", Journal of Textiles and Polymers, 2023 Apr vol. 11, no. 2, pp.3-15, 2023.

Rouhollah Semnani Rahbar, B. Kalantari, M.R. Mohaddes Mojtahedi, "Crystal Morphology of Polypropylene/Graphene Nanoplatelets (PP/GnPs) Fibers in Isothermal and Non-isothermal Crystallization", Journal of Textiles and Polymers, 2021 Sep vol. 9, no. 4, pp.57-69, 2021.

Marjan Abbasi, M.R. Mohaddes Mojtahedi, Richard Kotek, "Experimental study on texturability of filament yarns produced from recycled PET", Textile Research Journal, 2020 May vol. 90, no. 0, pp.2703-2713, 2020.

Rouhollah Semnani Rahbar, B. Kalantari, M.R. Mohaddes Mojtahedi, "An Investigation on Microstructure, Morphology and Tensile Properties of Polypropylene/Graphene Nanoplatelets Nanocomposite Fiber in the Presence of Compatibilizer", Journal of Applied Researches of Chemical - Polymer, 2020 May vol. 4, no. 1, pp.13-30, 2020.

A. Ebrahimzade, Rouhollah Semnani Rahbar, M.R. Mohaddes Mojtahedi, Milad Valibeigi, "Probing the Photoluminescence Characteristics and Dyeability of Dyed Luminous Polypropylene Fabric", Fibers and Polymers, 2019 Dec vol. 20, no. 12, pp.2529-2539, 2019.

Rouhollah Semnani Rahbar, B. Kalantari, M.R. Mohaddes Mojtahedi, "Crystallization Behavior of Polypropylene/Graphene Nanoplatelets Nanocomposite Fiber II. Non-Isothermal Crystallization Kinetics", , 2019 Jul vol. 30, no. 30, pp.2152-2165, 2019.

Rouhollah Semnani Rahbar, B. Kalantari, M.R. Mohaddes Mojtahedi, "Crystallization Behavior of Polypropylene/Graphene Nanoplatelets Nanocomposite Fiber I. Isothermal Crystallization Kinetics", , 2019 May vol. 28, no. 28, pp.2022-2035, 2019.

S. Saeediasl, N. Ezazshahabi, M.R. Mohaddes Mojtahedi, "Characterization of fabric properties knitted from multifilament polyester textured yarns with various number of filaments", Journal of The Textile Institute, 2019 May vol. 0, no. 0, pp.1-10, 2019.

S. Baghersad, S. Bahrami, Marziyeh Ranjbar Mohammadi, M.R. Mohaddes Mojtahedi, Peyman Brouki Milan, "Development of biodegradable electrospun gelatin/aloe-vera/poly (??caprolactone) hybrid nanofibrous scaffold for application as skin substitutes", Materials Science and Engineering C-Materials For Biological Applications, 2018 Aug vol. 93, no. 0, pp.367-379, 2018.

Marjan Abbasi, M.R. Mohaddes Mojtahedi, Richard Kotek, "Effect of Melt Spinning Variables on the Structural Changes of Recycled and Bottle Grade Filament Yarn PET", Journal of Textiles and Polymers, 2018 Jun vol. 6, no. 2, pp.67-75, 2018.

A. Ebrahimzade, M.R. Mohaddes Mojtahedi, R. Semnani Rahbar, "Study on characteristics and afterglow properties of luminous polypropylene/ rare earth strontium aluminate fiber", Journal of Materials Science-Materials In Electronics, 2017 Jun vol. 28, no. 11, pp.8167-8176, 2017.

A. Ebrahimzade, M.R. Mohaddes Mojtahedi, R. Semnani Rahbar, "Preparation and characterisation of luminous polypropylene/phosphor strontium aluminate nanocomposite fibres with enhanced dyeability", Plastics Rubber and Composites, 2016 Sep vol. 45, no. 8, pp.368-373, 2016.

K. Nasouri, A. Mousavi Shoushtari, M.R. Mohaddes Mojtahedi, "Synthesis and characterization of highly dispersed multi-walled carbon nanotubes/polyvinylpyrrolidone composite nanofibers for EMI shielding application", Polymer Composites, 2016 Mar vol. 38, no. 9, pp.2026-2034, 2016.

K. Nasouri, A. Mousavi Shoushtari, M.R. Mohaddes Mojtahedi, "Theoretical and experimental studies on EMI shielding mechanisms of multi-walled carbon nanotubes reinforced high performance composite nanofibers", Journal of Polymer Research, 2016 Mar vol. 23, no. 3, pp.71-78, 2016.

Z. Esmaeilzadeh, B. Rezaei, A. Mousavi Shoushtari, M.R. Mohaddes Mojtahedi, "Enhancing the Thermal Characteristics of Shape-Stabilized Phase Change Nanocomposite Nanofibers by Incorporation of Multiwalled Carbon Nanotubes within the Nanofibrous Structure", Advances In Polymer Technology, 2016 Feb vol. 37, no. 1, pp.185-193, 2016.

Roya Dastjerdi, M.R. Mohaddes Mojtahedi, Mohammad Ali Tavanaei, "High Speed Spun PET Nanocomposites for Smart Multifunctional Approaches", Advances In Polymer Technology, 2016 Jan vol. 0, no. 0, pp.84-93, 2016.

K. Nasouri, A. Mousavi Shoushtari, M.R. Mohaddes Mojtahedi, "Effects of Polymer/Solvent Systems on Electrospun Polyvinylpyrrolidone Nanofiber Morphology and Diameter", Polymer Science Series A, 2015 Oct vol. 57, no. 6, pp.747-755, 2015.

K. Nasouri, A. Mousavi Shoushtari, M.R. Mohaddes Mojtahedi, "Evaluation of Effective Electrospinning Parameters Controlling Polyvinylpyrrolidone Nanofibers Surface Morphology via Response Surface Methodology", Fibers and Polymers, 2015 Sep vol. 16, no. 9, pp.1941-1954, 2015.

B. Kalantari, M.R. Mohaddes Mojtahedi, F. Sharif, Rouhollah Semnani Rahbar, "Flow-induced crystallization of polypropylene in the presence of graphene nanoplatelets and relevant mechanical properties in nanocompsoite fibres", Composites Part A-Applied Science and Manufacturing, 2015 Sep vol. 76, no. 76, pp.203-214, 2015.

K. Nasouri, A. Mousavi Shoushtari, M.R. Mohaddes Mojtahedi, "Thermodynamic Studies on Polyvinylpyrrolidone Solution Systems Used for Fabrication of Electrospun Nanostructures: Effects of the Solvent", Advances In Polymer Technology, 2015 Jul vol. 34, no. 3, pp.21495-21502, 2015.

S. Ghaffari, M.R. Mohaddes Mojtahedi, Roya Dastjerdi, "Comparison of the Morphological, Mechanical, and UV Protection Properties of TiO2/Polyamide 6 (PA6), and ZnO/PA6 Nanocomposite Multifilament Yarns", Journal of Macromolecular Science Part B-Physics, 2015 May vol. 54, no. 7, pp.783-798, 2015.

M. A. Tavanaie, N. Esmaeilian, M.R. Mohaddes Mojtahedi, "Olive hue visible-near infrared camouflage properties of high speed melt spun poly(ethylene terephthalate) multifilament yarn", Dyes and Pigments, 2015 Apr vol. 114, no. 0, pp.267-272, 2015.

B. Kalantari, M.R. Mohaddes Mojtahedi, F. Sharif, Ruhollah Semnani Rahbar, "Effect of Graphene Nanoplatelets Presence on the Morphology, Structure, and Thermal Properties of Polypropylene in Fiber Melt-Spinning Process", Polymer Composites, 2015 Mar vol. 36, no. 2, pp.367-375, 2015.

B. Mehrabli, M.R. Mohaddes Mojtahedi, A. Mousavi Shoushtari, "Investigation on physical properties of textured yarns produced from PP/ LDPE blends", Journal of Engineered Fibers and Fabrics, 2015 Jan vol. 9, no. 4, pp.135-139, 2015.

Foruzan Fasahat, Roya Dastjerdi, M.R. Mohaddes Mojtahedi, P. Hoseini, "Wear properties of high speed spun multi-component PA6 nanocomposite fabrics; abrasion resistance mechanism of nanocomposites", Wear, 2015 Jan vol. 322-323, no. 0, pp.117-125, 2015.

S. Kazemi, M.R. Mohaddes Mojtahedi, Wataru Takarada, Takeshi Kikutani, "Morphology and crystallization behavior of nylon 6 clay/neat nylon 6 bicomponent nanocomposite fibers", Journal of Applied Polymer Science, 2014 Mar vol. 131, no. 6, pp.1-8, 2014.

B. Azimi, M. Amani Tehran, M.R. Mohaddes Mojtahedi, "Predicting of Properties of False Twist Textured Yarns by Artificial Neural Network", Journal of Engineered Fibers and Fabrics, 2013 Sep vol. 8, no. 3, pp.1-5, 2013.

S. Kazemi, M.R. Mohaddes Mojtahedi, Ruhollah Semnani Rahbar, Wataru Takarada, Takeshi Kikutani, "Preparation and Characterization of Nylon 6-Clay Hybrid/Neat Nylon 6 Bicomponent Nanocomposite Fibers", World Academy of Science, Engineering and Technology, 2013 Jun vol. 7, no. 6, pp.994-997, 2013.

Mohammad Ali Tavanaie, A. Mousavi Shoushtari, F. Goharpey, M.R. Mohaddes Mojtahedi, "Matrix-fibril morphology development of polypropylene/poly(butylenes terephthalate) blend fibers at different zones of melt spinning process and its relation to mechanical properties", Fibers and Polymers, 2013 Mar vol. 14, no. 3, pp.396-404, 2013.

Roya Dastjerdi, M.R. Mohaddes Mojtahedi, "Multifunctional melt-mixed Ag/TiO2 nanocomposite PP fabrics: Water vapour permeability, UV resistance, UV protection and wear properties", Fibers and Polymers, 2013 Feb vol. 14, no. 2, pp.298-303, 2013.

B. Kalantari, M.R. Mohaddes Mojtahedi, A. Mousavi Shoushtari, Aminoddin Haji, "Effect of Hot Drawing Process on Physical and Thermal Properties of Polypropylene Fiber Containing Selective Peroxide and Comparison with Conventional Polypropylene Fibers", Polimeros-Ciencia E Tecnologia, 2012 Nov vol. 22, no. 5, pp.467-474, 2012.

Roya Dastjerdi, M.R. Mohaddes Mojtahedi, Naghmeh Heidari, "Developing Chromic Dyeable PET Nanocomposites: The Dye Absorption and Complex Formation Mechanisms", Journal of Applied Polymer Science, 2012 Sep vol. 125, no. 5, pp.3688-3694, 2012.

M. Amani Tehran, B. Azimi, M.R. Mohaddes Mojtahedi, "Investigating the Effect of False Twist Texturing Process on the Color Coordinates Variation of Spun-dyed Polyester Filament Yarns", Journal of Engineered Fibers and Fabrics, 2011 Dec vol. 6, no. 4, pp.54-62, 2011.

A. Ghassemi, M.R. Mohaddes Mojtahedi, R. Semnani Rahbar, "Investigation on the physical and structural properties of melt-spun multifilament yarns, drawn yarns and textured yarns produced from blend of PP and oxidized PP", Fibers and Polymers, 2011 Sep vol. 12, no. 6, pp.789-794, 2011.

M.R. Mohaddes Mojtahedi, R. Semnani Rahbar, "Influence of hot multistage drawing on structure and mechanical properties of nylon 6 multifilament yarn", Journal of Engineered Fibers and Fabrics, 2011 Aug vol. 6, no. 2, pp.7-14, 2011.

Z. Talebi Mazreheshahi, M.R. Mohaddes Mojtahedi, "Effect of blending two fiber grade polypropylenes with different molecular weight distributions on the physical and structural properties of melt spun filament yarns", The Journal of The Textile Institute, 2010 May vol. 101, no. 6, , 2010.

R. Semnani Rahbar, M.R. Mohaddes Mojtahedi, M. Maroufi, "Effect of yarn wetting on some physical properties of polyamide 6 false twist textured yarn", Research Journal of Textile and Apparel, 2010 Feb vol. 14, no. 1, , 2010.

R. Dastjerdi, M.R. Mohaddes Mojtahedi, A. Mousavi Shoushtari, A. Khosro Shahi, "Fiber to Fabric Processability of Silver /zinc -Loaded Nanocomposite Yarns", Textile Research Journal, 2009 Dec vol. 0, no. 12, , 2009.

R. Dastjerdi, M.R. Mohaddes Mojtahedi, A. Mousavi Shoushtari, "Comparing thr effect of three processing methods for modification of filament yarns with inorganic nanocomposite filler and their bioactivity against staphylococcus aureus", Macromolecular Research, 2009 Jun vol. 0, no. 17, , 2009.

R. Dastjerdi, M.R. Mohaddes Mojtahedi, A. Mousavi Shoushtari, "Investigating the effect of various blend ratios of prepared masterbatch containing Ag/TiO2 nanocomposite on the properties of bioactive continuous filament yarns", Fibers and Polymers, 2008 Dec vol. 0, no. 6, , 2008.

M.A. Tavanaie, A. Mousavi Shoushtari, F. Goharpey, M.R. Mohaddes Mojtahedi, "Matrix-fibril morphology and structure of polyblend fibers in melt spinning process: A review", Iranian Journal of Polymer Science and Technology, 2008 Dec vol. 0, no. 5, , 2008.

R. Dastjerdi, M.R. Mohaddes Mojtahedi, A. Mousavi Shoushtari, "Processing and Properties of Nanocomposite Filament Yarns With Various Filler Concentrations From Two Different Modification Methods", Macromolecular Symposia, 2008 Dec vol. 0, no. 274, , 2008.

B. Mehrabli, A. Mousavi Shoushtari, M.R. Mohaddes Mojtahedi, A. Khosro Shahi, "Structural and physical properties of melt spun multifilament yarn from PP/LDPE blend before and after texturing", Iranian Journal of Polymer Science and Technology, 2008 May vol. 0, no. 1, , 2008.

B. Kalantary, R. Semnani Rahbar, M.R. Mohaddes Mojtahedi, A. Mousavi Shoushtari, A. Khosro Shahi, "Production and Characterization of Polypropylene Fiber Upon Addition of Selective Peroxide During Melt Spinning and Comparison With Conventional Polypropylene Fibers", Journal of Applied Polymer Science, 2007 Aug vol. 0, no. 105, , 2007.

R. Semnani Rahbar, M.R. Mohaddes Mojtahedi, B. Kalantary, "Comparison of Crimp Properties Measuring Methods of PA 6 Textured Yarns", Chemical Fibers International, 2007 Jun vol. 0, no. 3, , 2007.

M. Abbasi, M.R. Mohaddes Mojtahedi, A. Khosro Shahi, "Effect of Spinning Speed on The Structure and Physical Properties of Filament Yarns Produced From Used PET Bottles", Journal of Applied Polymer Science, 2007 Mar vol. 0, no. 103, , 2007.

M.R. Mohaddes Mojtahedi, M.A. Tavanaie, "Study of draw ratio distribution in the sequential false-twist texturing of PET yarn", , 2006 Oct vol. 0, no. 5, , 2006.

M. Nazi, M.R. Mohaddes Mojtahedi, R. Mohammad Ali Malek, "Continuous Dyeing and False -Twist Texturing of Polyamide 6 Yarns", Coloration Technology, 2006 Jun vol. 0, no. 122, , 2006.

R. Semnani Rahbar, M.R. Mohaddes Mojtahedi, M. Heidaro Nia, B. Bakhshandeh, "Effect of setting zone variables on the physical properties of PET textured yarns", Chemical Fibers International, 2006 Feb vol. 0, no. 0, , 2006.

M. Yousefzadeh, M. Amani Tehran, M. Latifi, M.R. Mohaddes Mojtahedi, "Characterizing Bulkiness and Hairiness of air -Jet Textured Yarn Using Imaging Techniques", Journal of The Textile Institute, 2005 Aug vol. 0, no. 0, , 2005.

M. Yousefzadeh, M. Amani Tehran, M. Latifi, M.R. Mohaddes Mojtahedi, "Determination of Crimp Indexes of False Twist and Knit de Knit Textured Yarns Using Computer Vision", Amirkabir Science and Research Journal, 2005 May vol. 0, no. 0, , 2005.

M.R. Mohaddes Mojtahedi, B. Tajali, "A comparison of the properties and behaviour of circular and triangular cross-section polyamide 6 filament yarns in pin and disc false-twist texturing", Iranian Polymer Journal, 2004 Aug vol. 0, no. 4, , 2004.

M.A. Tavanaie, M.R. Mohaddes Mojtahedi, M. Haghighat Kish, "The effect of some drawing process variables on physical properties of polyamide 6 multifilament yarn", Iranian Journal of Polymer Science and Technology, 2003 Oct vol. 0, no. 4, , 2003.

N. Golshan Ebrahimy, , M.R. Mohaddes Mojtahedi, "Producing dyeable polypropylene fibers by blendng PP/PET", Iranian Journal of Polymer Science and Technology, 2000 Sep vol. 0, no. 2, , 2000.

M. Haghighat Kish, M.R. Mohaddes Mojtahedi, "The effect of machine variables and twist of polyester yarn on the properties of bulked yarns by air texturing", Amirkabir Science and Research Journal, 1992 Sep vol. 0, no. 21, , 1992.

M. Haghighat Kish, M.R. Mohaddes Mojtahedi, "Analysis of producing bulked yarns by air texturing", Amirkabir Science and Research Journal, 1988 Mar vol. 0, no. 8, , 1988.

Taught Courses

Course title

Description

Headlines

Date

Fibers Production Process

4051

Yarn Texturing Technology

4051

Fibers Production Process

4042

Manmade Fiber Technology

4042

Yarn Texturing Technology

4041

Fibers Production Process

4041

Manmade Fiber Technology

4032

Inventions/Patents

Invention title

Reg. number

Country

contributers

Reg. date

Exp. date

Producing texturisable filament yarn from PP/LDPE blend

2006/12/1

2026/12/1

Production and processing of polypropylene nanocomposite filament yarns with stable antibacterial properties

2006/10/1

2026/10/1