MOHAMMAD ZAMAN KABIR - Amirkabir University of Technology

Identification and evaluation of safety risk factors in the phases of drilling and construction of urban tunnels - a casestudy of Mashhad metro tunnel

Seyyed Reza Mirakbari & Mohammad Zaman Kabir

September 2023

Experimental and Numerical Evaluation of Dynamic Response of Reinforced Concrete Beam Retrofitted with CFRP Strips and GFRP Bars Under Impact Loading Using NSM Method

Amirali Hosseinnia & Mohammad Zaman Kabir

June 2023

investigation of lateral-torsional buckling of reinforced thin-walled pultruded beams by shape memory alloys under mechanical and thermo-mechanical loading

Ariz Rezaei & Mohammad Zaman Kabir

March 2023

Accident Causation Model for Fire Occurrence of Atmospheric Storage Tanks

Seyed Ali Mirabolhasani & Mohammad Zaman Kabir

February 2023

Production of Self Compacting Ultra High Performance Concrete with Nano Silica or Other Nano Pozzolans

Amirreza Abdollahi Mofrad & Mohammad Zaman Kabir

October 2022

Assessment of lightweight concrete slab reinforced with polymer fiber subjected to impact loading

Javad Haghniaroshanfekr & Mohammad Zaman Kabir

July 2022

Seismic performance of 3D wall connection by considering Nano-particle

Ramin Dinar & Mohammad Zaman Kabir

May 2022

Damage assessment of RC beams under coupled corrosion-fatigue progress

Shakiba Azimi & Mohammad Zaman Kabir

November 2021

assessment of mechanical performance of green concrete beams under statics and cyclic progressive loading

Saba Khaksarian & Mohammad Zaman Kabir

November 2021

Elastic buckling analysis of pultruded FRP plane frames reinforced with SMA wires

Mahsa Haghani & Mohammad Zaman Kabir

October 2021

Experimental and numerical Stability Strength assessment at Tubular sections using 3D printing process

Sara Golbabapour & Mohammad Zaman Kabir

September 2021

Provide an Optimal HSE Management system model in Bridge Construction project Study of the First Phase of Freeway of Tehran - North

Alireza Amanzadeh & Mohammad Zaman Kabir

January 2021

Stress Analysis of Composite Pressure Vessels constructed by the 3-D print method

Tara Habibi & Mohammad Zaman Kabir

January 2020

Snap-through buckling of membrane structures construction using the 3D print method

Farid Vafadar Estiar & Mohammad Zaman Kabir

January 2020

Provide an Optimal Model for HSE Management System in Tunneling Construction Projects ; case of study first phase of Freeway of Tehran - North

Adel Gholami & Mohammad Zaman Kabir

December 2019

stress analysis on a cracked square steel plate , strengthened by FRP covers under the boundary stress field

Mohammad Mahdi Talebi & Mohammad Zaman Kabir

July 2019

Analysis of crack and determine the stress intensity factor under cyclic loads in the joints of the steel piped members , strengthened by FRP covers

Mohammadsadegh Pakdel & Mohammad Zaman Kabir

June 2019

experimental and numerical investigations of beam to column bolted joints for FRP pultruded

Mohsen Abbasi Ghahfarrokhi & Mohammad Zaman Kabir

March 2019

Optimization of 3d steel frame with variable inertia members with emphasis on performance

Mohammad Mahdi Bohlool & Mohammad Zaman Kabir

February 2019

Seismic Performance Retrofitting of RC Columns with FRP and SMA Externally Bounded Patches

Saeed Parandeh Khozani & Mohammad Zaman Kabir

June 2018

Numerical analysis of FRP laminates of marine structure piers under static and hydrodynamic hoading

Arang Shaafi & Mohammad Zaman Kabir

March 2018

Experimental investigation on FRP super laminate mechanical characteristics and piers retrofitted using externally bonded polymeric fabrics

Hossein Parsaeian & Mohammad Zaman Kabir

March 2018

Stability analysis of thin-walled cold-formed beams used in composite sections

Ali Shokri & Mohammad Zaman Kabir

February 2018

Micro-damage assessment of adobe element reinforced with short-fibers under various type of loads

Mohsen Khanverdi & Mohammad Zaman Kabir

October 2017

experimental investigation of flexural behavior of reinforced concrete slabs using pultruded grfp grating

Amir Marvan Ahrabi & Mohammad Zaman Kabir

July 2017

An investigation on flexural performance of reinforced beam with composite bars (FRP

Milad Ghorbanpoor & Mohammad Zaman Kabir

July 2017

behavior evaluation of concrete bean with FRP rods under impact loading

Nariman Aminakbari & Mohammad Zaman Kabir

July 2017

Behavior of Cold-Formed Beam-Column Under Cyclic Loading

Omid Fasihizadeh & Mohammad Zaman Kabir

February 2017

Numerical and experimental evaluation on performance of composite floor under impact loading

Fakhreddin Emami & Mohammad Zaman Kabir

February 2017

Lateral-torsional Buckling Analysis of Thin-Walled Cold-Formed Girder With Corrugated Webs Including Opening

Mohammad Tolouei & Mohammad Zaman Kabir

October 2016

Optimum beam-column connection in flexural frames made of cold-formed steel sections

Mina Kargar & Mohammad Zaman Kabir

August 2016

Performance of cold formed corrugated steel shear walls in multi- story buildings

Ali Karbassi & Mohammad Zaman Kabir

March 2016

strengthening of masonry Arches and domes with FRP strips

Ehsan Harati Khalilabad & Mohammad Zaman Kabir

February 2016

Buckling & Post-Buckling Strenght improvement of Laminated Plates using SMA wires

Behrang Tavousi Tehrani & Mohammad Zaman Kabir

February 2016

Numerical investigation of active confinement of shape memory alloy in overwrapped RC column with FRP under axial and shear loading

Moloud Ashtari Larki & Mohammad Zaman Kabir

November 2015

Post-buckling strength of FRP partial retrofitted thin metal plate with internal crack under combined in-plane loading

Mohamadreza Sahraban & Mohammad Zaman Kabir

November 2015

Investigation into the Behaviour of Reinforced Concrete Beams Retrofitted With Frp Fabrics subjected to Blast Loading

Mehdi Saloo & Mohammad Zaman Kabir

October 2015

strengthening of metallic tubular T joints under axial cyclic load using FRP wrapping

Amin Yazdi & Mohammad Zaman Kabir

October 2015

SEISMIC performance and energy dissipation characteristics of cold_formed steel plates with an opening

Milad Bahrebar & Mohammad Zaman Kabir

February 2015

Progressive failure assessment of composite stress soncentrated in Glass/Epoxy plate under tension

Seyed Mohammad Mehdi Noorbakhsh Dehkordi & Mohammad Zaman Kabir

February 2015

A performance based comparison between confined & reinforced masonry walls under progressive back and forth lateral loading

Bahman Shakarami & Mohammad Zaman Kabir

February 2015

Buckling and post-buckling analysis of cracked FGM plates under mechanical loadings

Mohammad Navi & Mohammad Zaman Kabir

July 2014

considering the stability of FGM spherical shells under external pressure and thermal changes

Mohammad Amin Shahmohammadi & Mohammad Zaman Kabir

October 2013

CFS Seismic Evaluation of Bending Frames Made of Cold-rolled Sections

Seyyed Mohammad Mojtabaie & Mohammad Zaman Kabir

October 2013

Assessment Of Seismic Rehabilitation Bending RC Frames Retrofitted Using FRP Fabrics

Shohreh Alaedini & Mohammad Zaman Kabir

October 2013

Investigation on bucking modes of thin-walled cold-formed steel compound sections considering residual stresses

Arash Askari & Mohammad Zaman Kabir

January 2013

Lateral-torsional bucking analysis of cold-formed open sections underin-plain loading, considering residual stress

Mehdi Parvizi & Mohammad Zaman Kabir

October 2012

Repair of demaged steel-concrete composite girders using CFRP plates

Mehdi Motaleb & Mohammad Zaman Kabir

October 2012

modeling of crack propagation in RC slender piers retrofitted with FRP under simultaneous axial, shear and flexural forces

Farhad Salehi & Mohammad Zaman Kabir

October 2012

Buckling of initialy delaminated composite beams

Mehdi Taherzadeh Esfahani & Mohammad Zaman Kabir

September 2012

Investigation on Behavior of LSF Panels with Steel Strap Bracing Under Cyclic Loading

Mostafa Bagheriha Kelishami & Mohammad Zaman Kabir

February 2012

Numerical Investigation of Interfacial Stresses in NSM Method of Shear Strengthening of RC Beams

Hossein Momenilarimi & Mohammad Zaman Kabir

February 2012

Seismic retrofitting of slender RC columns using FRP fabric

Hamed Zadmehr & Mohammad Zaman Kabir

March 2011

retrofittingof masonry walls containing openung against out of plane load using FRP fabric

Hassein Kolahi & Mohammad Zaman Kabir

February 2011

Strengthening of hollow and box section RC beam under torsion with FRP fabrics

Alireza Zojaji & Mohammad Zaman Kabir

February 2011

Enhancing the seismic performance of 3D wall system on pilotis RC frame

Parisa Shadan & Mohammad Zaman Kabir

February 2011

Lateral-Torsional buckling of Steel beam using FRP sheets

Ali Ehsan Seif & Mohammad Zaman Kabir

June 2010

Seismic Performance of L-Shaped Wall to Wall Connections of ICF Panels

Aman Karamlou & Mohammad Zaman Kabir

June 2010

Seismic Performance of Steel Shear Wall under Cyclic & Transient Loading

Ramin Mahmoodzade Andvari & Mohammad Zaman Kabir

March 2009

seismic analysis of 3D walls with opening under cyclic & transient loading

Majid Taheri & Mohammad Zaman Kabir

February 2009

The buckling of cracked aluminium cylindrical shells stiffened with FRP patch

Alireza Nazari & Mohammad Zaman Kabir

February 2009

Numerical Investigation of Cyclic Performance of Retrofitted Beam Column joint by External FRP fabric

Hamzeh Khamehchian & Mohammad Zaman Kabir

February 2009

Effects of opening on the post- buckling of thin walled cylindrical composite shells subjected to axial load

Ali Ehsanbakhsh & Mohammad Zaman Kabir

December 2008

Analytical Study of Externally Retrofitted RC Beams by FRP under Low Velocity Impact

Erfan Shafei & Mohammad Zaman Kabir

September 2008

Numerical buckling analysis of thin-walled cold-form girder section with corrugated webs under bending and shear loading

Shahram Ebrahimi & Mohammad Zaman Kabir

May 2008

INELASTIC SEISMIC RESPONSE OF PRECAST 3D WALL STRUCTURES WITH DISCONTINUOUS SHEAR WALLS SUPPORTED ON FRAMES

Amir Homayoon Kosarieh & Mohammad Zaman Kabir

March 2008

FLEXURAL AND SHEAR PERFORMANCE OF ONE AND TWO WAYS CONCRETE SLABS UPGRADING WITH FRP FABRICS

Hossein Ghaednia & Mohammad Zaman Kabir

March 2008

BEHAVIOR AND ANALYSIS OF FRP WRAPPED CONCRETE COLUMNS UNDER ECCENTRIC LOADING

Ali Mansouri & Mohammad Zaman Kabir

February 2008

STUDY OF NEAR SURFACE MOUNTED (NSM) TECHNIQUE FOR STRENGTHENING OF RC BEANS USING CFRP STRIPS

Hamid Yadollahi Omran & Mohammad Zaman Kabir

February 2008

SEISMIC PERFORMANCE OF UPGRADED RC FRMES USING PREFABRICATED LIGHTWEIGHT SANDWICH PANELS

Majid Safehian & Mohammad Zaman Kabir

February 2008

STRESS AND FAILURE ANALYSIS OF PIN-LOADED HOLE ANISOTROIC PLATE UNDER IN PLANE LOADING

Mohammad Gholami & Mohammad Zaman Kabir

September 2007

Books

Title

Author(s)

Publisher country

publication date

version

Portal Records

seismic performance of 3D panel buildings

Mohammad Zaman Kabir, Omid Rezaeifar

Iran (Islamic Republic of)

December 2014

Journal Papers

Portal Records

Ali Ehsan Seif, Mohammad Zaman Kabir, "CLOSED-FORM SOLUTION OF A METAL PLATE WITH A CENTRAL CRACK UNDER TENSION", JOURNAL OF THE SERBIAN SOCIETY FOR COMPUTATIONAL MECHANICS, December 2023 Vol. 17, Num. 1, Page 41-55, December 2023,

Nariman Aminakbari, Mohammad Zaman Kabir, Alireza Rahai, Amirali Hosseinnia, "Experimental and Numerical Evaluation of GFRP-Reinforced Concrete Beams under Consecutive Low-Velocity Impact Loading", INTERNATIONAL JOURNAL OF CIVIL ENGINEERING, August 2023 Vol. 1, Num. 1, Page 1-12, August 2023,

Sara Golbabapour, Mohammad Zaman Kabir, "Material characterization and micro-damage detection of additive manufactured poly-lactic-acid products using material extrusion-based technique", PROGRESS IN ADDITIVE MANUFACTURING, July 2023 Vol. 1, Num. 1, Page 1-24, July 2023,

Mahdieh Sabbaghian, Mohammad Zaman Kabir, "INNOVATIVE USE OF SHAPE MEMORY ALLOYS AS REINFORCEMENTS FOR CONCRETE BEAM-COLUMN JOINTS: AN OVERVIEW", Kufa Journal of Engineering, April 2023 Vol. 14, Num. 2, Page 24-42, April 2023,

Razieh Sistani Nezhad, Mohammad Zaman Kabir, Mehdi Banazadeh, "Strength Evaluation of Masonry Walls Externally Bonded Using FRP Fabrics Under Out-Of-Plane Loading Through Fragility Curves", INTERNATIONAL JOURNAL OF CIVIL ENGINEERING, July 2022 Vol. 1, Num. 1, Page 1-18, July 2022,

Fatemeh Faghih Khorasani, Mohammad Zaman Kabir, "Experimental study on the effectiveness of short fiber reinforced clay mortars and plasters on the mechanical behavior of adobe masonry walls", Case Studies in Construction Materials -OPEN, January 2022 Vol. 16, Num. 1, Page 1-17, January 2022,

Mohammad Amin Mirdarsoltany, Alireza Rahai, Mohammad Zaman Kabir, "Performance Evaluation of CFRP Strengthened Corrosion- Proof Columns", SHOCK AND VIBRATION, September 2021 Vol. 2021, Num. 1, Page 1-14, September 2021,

Fatemeh Faghih Khorasani, Mohammad Zaman Kabir, Khosrow Ghavami, "A mathematical model for predicting complete compressive stress-strain curve of plain and short fiber reinforced clay adobes", AUT Journal of Civil Engineering, April 2021 Vol. 5, Num. 1, Page 1-12, April 2021,

Bahman Shakarami, Mohammad Zaman Kabir, Raziyeh Sistaninejad, "Numerical modeling of a new reinforced masonry system subjected to in-plane cyclic loading", SCIENTIA IRANICA TRANSACTION A-CIVIL ENGINEERING, December 2020 Vol. 27, Num. 6, Page 2790-2807, December 2020,

Shohreh Alaedini, Mohammad Zaman Kabir, Riadth Al-Mahaidi, "Stability Performance of thin-walled Pultruded Beams with geometric Web-Flange Junction Imperfections", Journal of Building Engineering, December 2020 Vol. 33, Num. 1, Page 1-22, December 2020,

Hossein Zarrinzadeh, Mohammad Zaman Kabir, A. Varvani-Farahani, "Static and dynamic fracture analysis of 3D cracked orthotropic shells using XFEM method", THEORETICAL AND APPLIED FRACTURE MECHANICS, May 2020 Vol. 108, Num. 0, Page 1-11, May 2020,

Fatemeh Faghih Khorasani, Mohammad Zaman Kabir, "The effectiveness of rubber short fibers reinforcing on mechanical characterization of clay adobe elements under static loading", EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING, March 2020 Vol. 0, Num. 0, Page 1-33, March 2020,

Mehdi Saloo, Mohammad Zaman Kabir, Mohammad Reza Khedmati, "Assessment of performance criteria of reinforced concrete beams retrofitted with FRP fabrics subjected to extreme impulsive loading", ADVANCED COMPOSITE MATERIALS, March 2020 Vol. 0, Num. 0, Page 1-23, March 2020,

Fatemeh Faghih Khorasani, Mohammad Zaman Kabir, Mehdi Ahmadi Najafabadi, Khosrow Ghavami, "Predicting compressive stress?strain curves of structural adobe cubes based on Acoustic Emission (AE) hits and Weibull distribution", international Journal of Structural Integrity, November 2019 Vol. 10, Num. 6, Page 776-791, November 2019,

Mohammad Zaman Kabir, Omid Rezaeifar, "Shaking table examination on dynamic characteristics of a scaled down 4story building constructed with 3D-panel system", Structures, June 2019 Vol. 20, Num. 1, Page 411-424, June 2019,

Ali Kaveh, Mohammad Zaman Kabir, Mohammad Mahdi Bohlool, "Optimum design of three-dimensional steel frames with prismatic and non-prismatic elements", ENGINEERING WITH COMPUTERS, April 2019 Vol. 1, Num. 1, Page 1-19, April 2019,

Mohammad Zaman Kabir, Mehdi Parvizi, "The effects of residual stresses and strains on Lateral-torsional buckling behaviour of cold formed steel channel and built-up I-sections beams", international Journal of Structural Integrity, April 2019 Vol. 10, Num. 2, Page 230-243, April 2019,

Fakhreddin Emami, Mohammad Zaman Kabir, "Performance of Composite metal deck slabs under impact loading", Structures, March 2019 Vol. 19, Num. 1, Page 476-489, March 2019,

Ali Ehsan Seif, Mohammad Zaman Kabir, "Spline finite strip modelling of post-buckling behavior in the notched tensioned sheets considering analytical approaches for fracture and fatigue", THIN-WALLED STRUCTURES, January 2019 Vol. 137, Num. 0, Page 541-560, January 2019,

Ghazaleh Soltanieh, Mohammad Zaman Kabir, Mohammad Shariyat, "Improvement of the dynamic insatbility of shallow hybrid composite cylindrical shells under ompulse loads using shape memory alloy wires", COMPOSITES PART B-ENGINEERING, January 2019 Vol. 167, Num. 0, Page 167-179, January 2019,

Ali Kaveh, Mohammad Zaman Kabir, Mohammad Mahdi Bohlool, "Optimal Design of Multi-Pitched Roof Frames with Tapered Members", PERIODICA POLYTECHNICA-CIVIL ENGINEERING, October 2018 Vol. 0, Num. 0, Page 1-10, October 2018,

Alireza Nazari, Mohammad Zaman Kabir, Hossein Hosseini Toudeshky, "Development of work-hardening performance in stainless-steel cylindrical columns bu application of CFRP jackets", COMPOSITE STRUCTURES, July 2018 Vol. 203, Num. 0, Page 38-49, July 2018,

Parisa Shadan, Mohammad Zaman Kabir, "Enhancing local buckling behavior of SHS braces using GFRP and CFRP wrap", JOURNAL OF COMPOSITES FOR CONSTRUCTION, June 2018 Vol. 0, Num. 10, Page 1-16, June 2018,

Alireza Nazari, Mohammad Zaman Kabir, Hossein Hosseini Toudeshky, "Evaluation of enhancement in the mechanical properties of the glass/vinylester composite laminates under flexural load using progressive failure analysis", Journal of Sciences and Technology of Composites, May 2018 Vol. 5, Num. 1, Page 51-60, May 2018,

Bahman Shakarami, Mohammad Zaman Kabir, Raziyeh Sistaninejad, "Parametric study on confined masonry walls subjected to in-plane cyclic loading through numerical modeling", AUT Journal of Civil Engineering, May 2018 Vol. 2, Num. 1, Page 49-58, May 2018,

Parisa Shadan, Mohammad Zaman Kabir, "Experimantal and numerical investigation of FRP-confined SHS brace members under cyclic loading", THIN-WALLED STRUCTURES, April 2018 Vol. 130, Num. 0, Page 132-147, April 2018,

Behrang Tavousi Tehrani, Mohammad Zaman Kabir, "Non-linear Load-Deflection Response of SMA Composite Plate Resting on Winkler-Pasternak Type Elastic Foundation under Various Mechanical and Thermal Loading", THIN-WALLED STRUCTURES, April 2018 Vol. 129, Num. 391, Page 391-403, April 2018,

Ali Ehsan Seif, Mohammad Zaman Kabir, "Innovative Fixture for the Buckling Measurements of the Notched Plates under Monotonic and Cyclic Tensile Loading", EXPERIMENTAL TECHNIQUES, February 2018 Vol. 0, Num. 0, Page 1-12, February 2018,

Ghazaleh Soltanieh, Mohammad Shariyat, Mohammad Zaman Kabir, "Influence of the 3D material tailoring on snap-thtrough and snap-back post-buckling behaviors of steel-wire-reinforced hybrid 3D graded orthotropic shallow cylindrical panels", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, January 2018 Vol. 0, Num. 0, Page 1-17, January 2018,

Seyyed Mohammad Mojtabaie, Mohammad Zaman Kabir, Iman Hajirasouliha, Mina Kargar, "Analytical and experimental study on the seismic performance of cold-formed steel frames", JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, January 2018 Vol. 143, Num. 0, Page 18-31, January 2018,

Mehdi Motaleb, Mohammad Zaman Kabir, "Finite element modelling of notched steel concrete composite girder repaired using FRP plates", Asian Journal of Civil Engineering (Building and Housing), September 2017 Vol. 18, Num. 8, Page 1-20, September 2017,

Ghazaleh Soltanieh, Mohammad Zaman Kabir, Mohammad Shariyat, "Snap insatbility of shallow laminated cylindrical shells reinforced with functionally graded shape memory alloy wires", COMPOSITE STRUCTURES, August 2017 Vol. 180, Num. 0, Page 581-595, August 2017,

Alireza Nazari, Mohammad Zaman Kabir, Hossein Hosseini Toudeshky, Younes Alizadeh Vaghasloo, Sepideh Najafian, "Investigation of progressive failure in the composite sandwich panels with elastomeric foam core under concentrated loading", JOURNAL OF SANDWICH STRUCTURES & MATERIALS, July 2017 Vol. 0, Num. 0, Page 1-31, July 2017,

Ghazaleh Soltanieh, Mohammad Zaman Kabir, Mohammad Shariyat, "A robust algorithm for behavior and effectiveness investigations of super-elastic SMA wires embedded in composite plates under impulse loading", COMPOSITE STRUCTURES, July 2017 Vol. 179, Num. 0, Page 355-367, July 2017,

Alireza Nazari, Mohammad Zaman Kabir, Hossein Hosseini Toudeshky, "On the decreasing flexural modulus of glass/vinylester composite beams up to failure state", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, June 2017 Vol. 0, Num. 0, Page 1464-1489, June 2017,

Alireza Nazari, Hossein Hosseini Toudeshky, Mohammad Zaman Kabir, "Experimental investigation on the sandwich composite beams and panels with elastomeric foam core", JOURNAL OF SANDWICH STRUCTURES & MATERIALS, May 2017 Vol. 1, Num. 1, Page 1-30, May 2017,

Mohammad Amin Shahmohammadi, Mohammad Zaman Kabir, "Effects of Shear deformation on mechanical and thermo-mechanical nonlinear stability of FGM shallow spherical shells subjected to uniform external pressure", SCIENTIA IRANICA TRANSACTION A-CIVIL ENGINEERING, April 2017 Vol. 24, Num. 2, Page 584-596, April 2017,

Alireza Nazari, Mohammad Zaman Kabir, Hossein Hosseini Toudeshky, "Investigation of Elastomeric foam response applied as core for composite sandwich beams through progressive failure of the beams", JOURNAL OF SANDWICH STRUCTURES & MATERIALS, April 2017 Vol. 0, Num. 0, Page 1-35, April 2017,

Ata Hojjat Kashani, Mohammad Zaman Kabir, "Innovative experimental and finite element assessments of the performance of CFRP retrofitted RC beams under fatigue loading", SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, March 2017 Vol. 0, Num. 0, Page 1-18, March 2017,

Raziyeh Sistaninejad, Mohammad Zaman Kabir, "Experimental investigation on out-of-plane behavior of GFRP retrofitted masonry panels", CONSTRUCTION AND BUILDING MATERIALS, January 2017 Vol. 131, Num. 0, Page 630-640, January 2017,

Mohammad Zaman Kabir, Behrang Tavousi Tehrani, "Closed-form solution for thermal, mechanical, and thermo-mechanical buckling and post-buckling of SMA composite plates", COMPOSITE STRUCTURES, January 2017 Vol. 168, Num. 0, Page 535-548, January 2017,

Hossein Zarrinzadeh, Mohammad Zaman Kabir, Ardeshir Deylami, "Crack growth and debonding analysis of an aluminum pipe repaired by composite patch under fatigue loading", THIN-WALLED STRUCTURES, January 2017 Vol. 112, Num. 0, Page 140-148, January 2017,

Ali Ehsan Seif, Mohammad Zaman Kabir, "Experimental study on the fracture capacity and fracture capacity and fatigue life reduction of the tensioned cracked plate due to the local buckling", ENGINEERING FRACTURE MECHANICS, January 2017 Vol. 0, Num. 0, Page 1-10, January 2017,

Hossein Zarrinzadeh, Mohammad Zaman Kabir, Ardeshir Deylami, "Experimental and numerical fatigue crack growth of an aluminum pipe repaired by composite patch", ENGINEERING STRUCTURES, January 2017 Vol. 133, Num. 0, Page 24-32, January 2017,

Mehdi Taherzadeh Esfahani, Mohammad Zaman Kabir, M. Heidari Rarani, "An analytical approach for local buckling analysis of initially delaminated composite thin-walled columns with open and closed sections", ADVANCED COMPOSITE MATERIALS, November 2016 Vol. 1, Num. 1, Page 1-21, November 2016,

Ali Ehsan Seif, Mohammad Zaman Kabir, "THE GENERAL FORM OF THE ELASTIC STRESS AND DISPLACEMENT FIELDS OF THE FINITE CRACKED PLATE", JOURNAL OF THEORETICAL AND APPLIED MECHANICS, October 2016 Vol. 54, Num. 4, Page 1271-1283, October 2016,

Milad Bahrebar, Mohammad Zaman Kabir, Mohammad Hajsadeghi, Tadeh Zirakian, James B. P. Lim, "Structural Performance of Steel Plate Shear Walls with Trapezoidal Corrugations and Centrally-Placed Square Perforations", INTERNATIONAL JOURNAL OF STEEL STRUCTURES, September 2016 Vol. 16, Num. 3, Page 845-855, September 2016,

Raziyeh Sistaninejad, Mohammad Zaman Kabir, Mehdi Banazadeh, "Shaking Table test of Fibre Reinforced Masonry Walls under out-of-Plane Loading", CONSTRUCTION AND BUILDING MATERIALS, May 2016 Vol. 120, Num. 0, Page 89-103, May 2016,

Amirmozafar Benshams, Saman Shafeienejad, Mohammad Zaman Kabir, Farzad Hatami, Mohammad Reza Khedmati, Mesbah Sayehbani, "Investigate the Performance of SMA-FRP Composite Bars in Seismic Regions under Corrosion Conditions", World Academy of Science, Engineering and Technology, April 2016 Vol. 2016, Num. 3, Page 129-133, April 2016,

Milad Bahrebar, Mohammad Zaman Kabir, Tadeh Zirakian, Mohammad Hajsadeghi, James B. P. Lim, "Structural performance assessment of trapezoidally-corrugated and centrally-perforated steel plate shear walls", JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, March 2016 Vol. 122, Num. 0, Page 584-594, March 2016,

Hossein Zarrinzadeh, Mohammad Zaman Kabir, Ardeshir Deylami, "Extended Finite Element Fracture analysis of a cracked isotropic shell repaired by composite patch", FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, March 2016 Vol. 0, Num. 0, Page 1-13, March 2016,

Mohammad Zaman Kabir, Hadi Hejabi, "An Experimental study on FRP strengthened reinforced concrete frames under simulated seismic loading", Iranian Journal of Science and Technology Transactions of Civil Engineering, December 2015 Vol. 39, Num. 2, Page 435-447, December 2015,

Shohreh Alaedini, Mohammad Zaman Kabir, Hadi Hejabi, "Seismic Ductility Evaluation of Shear-Deficient RC Frames Strengthened by Externally Bonded CFRP Sheets", KSCE JOURNAL OF CIVIL ENGINEERING, October 2015 Vol. 0, Num. 0, Page 1-11, October 2015,

Hadi Hejabi, Mohammad Zaman Kabir, "Analytical model for predicting the shear strength of FRP-retrofitted exterior reinforced concrete beam-column joints", SCIENTIA IRANICA TRANSACTION A-CIVIL ENGINEERING, August 2015 Vol. 22, Num. 4, Page 1363-1372, August 2015,

Ghazaleh Eslami, Mohammad Zaman Kabir, "Multi-objective optimization of orthogonally stiffened cylindrical shells using optimality criteria method", SCIENTIA IRANICA TRANSACTION A-CIVIL ENGINEERING, August 2015 Vol. 22, Num. 3, Page 717-727, August 2015,

Ali Ehsan Seif, Mohammad Zaman Kabir, "An efficient analytical model to evaluate the first two loacal buckling modes of finite cracked plate under tension", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, July 2015 Vol. 1, Num. 1, Page 2078-2079, July 2015,

Mehdi Motaleb, Mohammad Zaman Kabir, "Flexural behaviour of notched steel beams repaired with FRP plates: parametric studies", SCIENTIA IRANICA TRANSACTION A-CIVIL ENGINEERING, July 2015 Vol. 22, Num. 4, Page 1390-1401, July 2015,

Mohammad Zaman Kabir, Shohreh Alaedini, Hadi Hejabi, "Performance of fiber reinforced polymers (FRPs) retrofitting used in RC frames", , November 2014 Vol. 14, Num. 3, Page 117-127, November 2014,

Erfan Shafei, Mohammad Zaman Kabir, "Effects of CFRP Retrofit on Impact Response of Shear Deficient Scaled Reinforced Concrete Beams", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, November 2014 Vol. 11, Num. 14, Page 1-10, November 2014,

Shohreh Alaedini, Mohammad Zaman Kabir, "Assessment of damage index of retrofitted RC frame by using CFRP under cyclic loading", , October 2014 Vol. 1, Num. 1, Page 45-52, October 2014,

Mohammad Zaman Kabir, Ata Hojatkashani, "Experimental Examination of Intact and CFRP retrofitted RC beams under Monotonic and High-Cycle Fatigue Loading", International Journal of Advanced Design and Manufacturing Technology, September 2014 Vol. 6, Num. 3, Page 63-70, September 2014,

Ata Hojatkashani, Mohammad Zaman Kabir, "Experimental and Numerical investigation of stress distribution at interfacial zones of intact and CFRP retrofittited RC beams", JOURNAL OF ENGINEERING TECHNOLOGY, June 2013 Vol. 30, Num. 1, Page 8-18, June 2013,

َAmir Hossein Sangaki, Abolhasan Vafaei, Mohammad Zaman Kabir, Tayebeh Goli, "Ductility of L and T shape connection of 3D wall under lateral and vertical loading", Civil Engineering Sharif, March 2013 Vol. 29-2, Num. 1, Page 129-139, March 2013,

Ata Hojatkashani, Mohammad Zaman Kabir, "Interfacial stress assessment at the cracked zones in CFRP retrofitted RC beams", STRUCTURAL ENGINEERING AND MECHANICS, December 2012 Vol. 44, Num. 6, Page 705-733, December 2012,

Ata Hojatkashani, Mohammad Zaman Kabir, "Experimental examination of CFRP strengthened RC beams under high cycle fatigue loading", INTERNATIONAL JOURNAL OF CIVIL ENGINEERING, December 2012 Vol. 10, Num. 4, Page 1-1, December 2012,

Mohammad Zaman Kabir, Arsalan Kalali, "In-Plane Numerical Modelling of Strengthened Perforated Masonry Walls using FRP under Cyclic Loading", Asian Journal of Civil Engineering (Building and Housing), May 2012 Vol. 14, Num. 1, Page 161-179, May 2012,

Mohammad Zaman Kabir, Erfan Shafei, "Plasticity Modeling of FRP-Confined Circular Reinforced Concrete Columns Subjected to Eccentric Axial Loading", COMPOSITES PART B-ENGINEERING, April 2012 Vol. -, Num. 43, Page 3497-3506, April 2012,

Arsalan Kalali, Mohammad Zaman Kabir, "Cyclic behavior of perforated masonry walls strengthened with glass fiber reinforced polymers", SCIENTIA IRANICA TRANSACTION A-CIVIL ENGINEERING, February 2012 Vol. 20, Num. 1, Page 134-146, February 2012,

Alireza Zojaji, Mohammad Zaman Kabir, "Analytical approach for predicting full torsional behavior of reinforced concrete beams strengthened with FRP materials", SCIENTIA IRANICA TRANSACTION A-CIVIL ENGINEERING, January 2012 Vol. 19, Num. 1, Page 51-63, January 2012,

Arsalan Kalali, Mohammad Zaman Kabir, "Experimental response of double-wythe masonry panels strengthened with glass fiber reinforced polymers subjected to diagonal compression tests", ENGINEERING STRUCTURES, January 2012 Vol. 1, Num. 39, Page 24-37, January 2012,

Aman Karamlou, Mohammad Zaman Kabir, "Experimental study of L-shaped slender R-ICF shear walls under cyclic lateral loading", ENGINEERING STRUCTURES, January 2012 Vol. 36, Num. 0, Page 134-146, January 2012,

Mohammad Zaman Kabir, Alireza Nazari, "Enhancing Ultimate Compressive Strength of Notch Embedded Steel Cylinder using overwrap CFRP Patch", APPLIED COMPOSITE MATERIALS, December 2011 Vol. on line, Num. 0, Page 0-0, December 2011,

Erfan Shafei, Mohammad Zaman Kabir, "Dynamic Stability Optimization of Laminated Composite Plates under Combined Boundary Loading", APPLIED COMPOSITE MATERIALS, July 2011 Vol. on line, Num. 0, Page 1-19, July 2011,

Arsalan Kalali, Mohammad Zaman Kabir, "Determination of Linear Elastic Constant of Unreinforced Brick Walls in In-Plane and Out-of Plane Performance Based on Homogenization and Micromechanics Approach", , June 2011 Vol. 45, Num. 2, Page 203-217, June 2011,

Mohammad Zaman Kabir, Alireza Nazari, "The study of ultimate strength in notched cylinders subjected to axial compression", JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, May 2011 Vol. 0, Num. 67, Page 1442-1452, May 2011,

Mohammad Zaman Kabir, Erfan Shafei, "Interactive Instabilities of Thin-Walled Laminated Composite Pultrusion Box Columns", STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS, December 2010 Vol. 10, Num. 4, Page 131-140, December 2010,

Arsalan Kalali, Mohammad Zaman Kabir, "Modeling of Unreinforced Brick Walls under In-plane Shear & Compression Loading", STRUCTURAL ENGINEERING AND MECHANICS, October 2010 Vol. 36, Num. 3, Page 247-278, October 2010,

Mohammad Zaman Kabir, Alireza Nazari, "Numerical study on reinforcing of thin walled cracked metal cylindrical columns using FRP patch", SCIENTIA IRANICA TRANSACTION A-CIVIL ENGINEERING, October 2010 Vol. 17, Num. 5, Page 407-414, October 2010,

Mohammad Zaman Kabir, Ali Ehsan Seif, "Lateral-torsional buckling of retrofitted steel I-beams using FRP sheets", SCIENTIA IRANICA TRANSACTION A-CIVIL ENGINEERING, August 2010 Vol. 17, Num. 4, Page 262-272, August 2010,

Mohammad Zaman Kabir, Shapour Tahouni, Majid Safehian, "Experimental and numerical study of the seismic behavior of combined RC frame with sandwich panel or shear wall", , February 2010 Vol. 12, Num. 3, Page 31-38, February 2010,

Mohammad Zaman Kabir, Mohsen Eshaghian, "Flexural upgrading of steel- concrete composite Girders using externally bonded CFRP reinforcement", APPLIED COMPOSITE MATERIALS, November 2009 Vol. 17, Num. 17, Page 209-224, November 2009,

Mohammad Zaman Kabir, Reza Vasheghani Farahani, "experimental investigation of performance in L-shaped wall to wall corner connections of 3D panels subjected to lateral cyclic loading", , November 2009 Vol. , Num. 33, Page 0-0, November 2009,

Mohammad Zaman Kabir, Erfan Shafei, "Analytical and Numerical Study of FRP Retrofitted RC Beams Under Low Velocity Impact", , October 2009 Vol. , Num. 5, Page 0-0, October 2009,

Omid Rezaifar, Mohammad Zaman Kabir, [en-name N/A], "Shaking Table Test of a 1:2.35 Scale 4-Story Building Constructed With a 3D Panel System", , June 2009 Vol. , Num. 3, Page 0-0, June 2009,

Mohammad Zaman Kabir, Arsalan Kalali, "Investigation of Effective Length Factor Method in Satisfying Overall Stability of the Structural System", , December 2008 Vol. 0, Num. 0, Page 0-0, December 2008,

Mohammad Zaman Kabir, Arash Rojhani Shirazi, "Optimum Design of Filament -Wound Laminated Conical Shells for Buckling Using the Penalty Function", , September 2008 Vol. , Num. 3, Page 0-0, September 2008,

Mohammad Zaman Kabir, Ata Hojatkashani, "A Comparison Between Finite Element and Analytical Solutions of Interfacial Stress Distribution in a RC Beam Retrofitted With FRP Composites", , May 2008 Vol. 0, Num. 0, Page 0-0, May 2008,

Omid Rezaifar, Mohammad Zaman Kabir, Masood Taribakhsh, Amir Tehranian, "Dynamic behaviour of 3D-panel single-storey system using shaking table testing", , February 2008 Vol. , Num. 30, Page 0-0, February 2008,

Mohammad Zaman Kabir, Omid Rezaifar, Mohammad Reza Rahbar, "Upgrading Flexural Performance of Prefabricated Sandwich Panels Under Vertical Loading", , January 2007 Vol. , Num. 3, Page 0-0, January 2007,

Davood Poorveis, Mohammad Zaman Kabir, "Buckling of Discretely Stringer- Stiffened Composite Cylindrical Shells Under Combined Axial Compression and External Pressure", , April 2006 Vol. , Num. 2, Page 0-0, April 2006,

Mohammad Zaman Kabir, Ata Hojatkashani, "Distortional Buckling of Thin-Walled Open Section Beams", , February 2006 Vol. , Num. 5, Page 0-0, February 2006,

Mohammad Zaman Kabir, "Structural Performance of 3-D Sandwich Panels Under Shear and Flexural Loading", , October 2005 Vol. , Num. 1, Page 0-0, October 2005,

Mohammad Zaman Kabir, Davood Poorveis, "Stability Analysis of Laminated Cylindrical Shells under Combined Axial Compression and Non-Uniform External Pressure", , September 2005 Vol. , Num. 3, Page 0-0, September 2005,

Mohammad Zaman Kabir, Afshin Moslehi Tabar, "Elastic Post -Buckling Stiffness of Rectangular Frames Using Perturbation Technique", , May 2005 Vol. 0, Num. 0, Page 0-0, May 2005,

Mohammad Zaman Kabir, Afshin Moslehi Tabar, "Non-linear elastic stability of rectangular frames under various loading", , October 2004 Vol. , Num. 1, Page 0-0, October 2004,

Mohammad Zaman Kabir, "Finite element analysis of composite pressure vessels", , July 2000 Vol. , Num. , Page 0-0, July 2000,

Mohammad Zaman Kabir, "Shear strain effects on flexure and torsion of thin_walled pultruded composite beams", , December 1999 Vol. , Num. , Page 0-0, December 1999,

Mohammad Zaman Kabir, Archibald N.Sherbourne, "local buckling of thin_walled fibre composite beams under transverse loading", , February 1999 Vol. , Num. 26, Page 0-0, February 1999,

Mohammad Zaman Kabir, Archibald N.Sherbourne, "Lateral _ torsional buckling of post _ local buckled fibrous composite beams", , July 1998 Vol. , Num. 7, Page 0-0, July 1998,

100

Mohammad Zaman Kabir, Archibald N.Sherbourne, "Shear strain effect in latear", , May 1998 Vol. , Num. 5, Page 0-0, May 1998,

101

Mohammad Zaman Kabir, "Local buckling of fibre composite beams under stress gradient", , January 1998 Vol. , Num. 1, Page 0-0, January 1998,

102

Mohammad Zaman Kabir, "Optimal fibre orientation in lateral stability of laminated channel section beams", , January 1998 Vol. , Num. , Page 0-0, January 1998,

103

Mohammad Zaman Kabir, "optimal orientation", , January 1997 Vol. , Num. , Page 0-0, January 1997,

104

Mohammad Zaman Kabir, "Flexaral tarsinel stabilit", , January 1995 Vol. , Num. 3, Page 0-0, January 1995,

Conference Papers

Portal Records

Morteza Khomami Abadi, Mohammad Zaman Kabir, "Investigation of the behavior of intact and cracked steel plates under static and dynamic loading ", 24th International Conference on Computer Methods in Mechanics (CMM) and the 42nd Solid Mechanics Conference (SolMech)., September 2022

Ramin Dinar, Javad Haghniaroshanfekr, Mohammad Zaman Kabir, "Experimental evaluation effect of the microsilica on improving the mechanical properties of Shotcrete ", 13th National Congress on civil Engineering-Isfahan University of Technology, May 2022

Javad Haghniaroshanfekr, Ramin Dinar, Mohammad Zaman Kabir, "Numerical Investigation of Impact Performance of Reinforced Concrete Slabs Reinforced with CFRP Strips ", 13th national congress on civil engineering-Isfahan University of technology, May 2022

Sara Golbabapour, Mohammad Zaman Kabir, "Buckling and Post-Buckling Behavior of Tubular Columns Made of Shape Memory Alloys ", :The 7th International Conference on Composites (Characterization, Fabrication and Application (CCFA-7, December 2020

Fatemeh Faghih Khorasani, Mohammad Zaman Kabir, "Experimental study on shear response of clay adobe beam reinforced using randomly distributed short fibers ", 2nd International Conference on Engineering Sciences, March 2018

Seyed Arvin Senobar Tahaei, Mohammad Zaman Kabir, Saeed Saber Samandari, "The investigation of mechanical properties and the enhancement of ductility of glass fiber reinforced polymer composites, using carbon nano tube addition ", Proceedings of the 7th International Conference on Nanostructures, February 2018

Fatemeh Faghih Khorasani, Mohammad Zaman Kabir, M. A. Rastak, "Tensile Characterization of Composite Adobe Specimens Reinforced with Short Fibers, an Experimental study ", The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), February 2018

Shohreh Alaedini, Mohammad Zaman Kabir, "Investigation of lateral-torsional buckling and post buckling analysis of thin walled pultruded composite beams possessing initial imperfections ", 6th national and 2nd international conference on new materials and structures in civil engineering, October 2017

Mohammad Amin Shahmohammadi, Mohammad Zaman Kabir, "Nonlinear stability of FGM shallow spherical shells including the effects of transverse shear deformation using analytical approach ", 6th national and 2nd international conference on new materials and structures in civil engineering, October 2017

Hamid Reza Moniri Abianeh, Mohammad Zaman Kabir, "optimization of tunnel structures behavior reinforced using FRP under cyclic loading ", 5th National and 1th International Conference on Modern Materials and Structures in Civil Engineering, October 2016

Ghazaleh Soltanieh, Mohammad Zaman Kabir, Mohammad Shariyat, "Dynamic response of shallow cylindrical shell with embedded SMA wires under impulse load ", 5th National and 1th International Conference on Modern Materials and Structures in Civil Engineering, October 2016

Mehdi Saloo, Mohammad Zaman Kabir, "Evaluation of shear-deficient RC beams strengthened by externally bonded FRP sheets subjected to impact loading ", 5th National and 1th International Conference on Modern Materials and Structures in Civil Engineering, October 2016

Moloud Ashtari Larki, Mohammad Zaman Kabir, "Numerical investigation of concrete cylinders confined with CFRP and SMA wires under axial loading ", 5th National and 1th International Conference on Modern Materials and Structures in Civil Engineering, October 2016

Raziyeh Sistaninejad, Mohammad Zaman Kabir, "Out-of-plane behavior of masonry walls retrofitted with FRP ", 5th National and 1th International Conference on Modern Materials and Structures in Civil Engineering, October 2016

Ghazaleh Soltanieh, Mohammad Zaman Kabir, Mohammad Shariyat, "The effect of shape memory alloy wires in behavior modification of composite plates with embedded SMA wires under impulse load ", 5th National and 1th International Conference on Modern Materials and Structures in Civil Engineering, October 2016

Mohammad Zaman Kabir, Mohammad Tolouei, Mohammad Reza Khedmati, "study on the effect of corrugated web girder angle on buckling capacity ", 1st National conference on applied research in structural engineering and construction management, September 2016

Mohammad Zaman Kabir, Mohammad Tolouei, Mohammad Reza Khedmati, "study on the effect of corrugated web girder on lateral-torsional buckling capacity ", 1st National conference on applied research in structural engineering and construction management, September 2016

Hossein Zarrinzadeh, Mohammad Zaman Kabir, Ardeshir Deylami, "Experimental and Numerical Fatigue Crack Growth of an Aluminum Pipe under Mixed Mode Fracture Condition ", 40th Solid Mechanics Conference, August 2016

Mohammad Zaman Kabir, Ali Ehsan Seif, "Special Design and Production of Fixture to Measure the Symmetric and Anti-symmetric Tensile Buckling Load of the Notched Thin Plates ", 40th Solid Mechanics Conference, August 2016

Amin Yazdi, Mohammad Zaman Kabir, "FRP effects on improvement of buckling modes in tubular T joints ", first National Conference on Composites for construction Application, May 2016

Behrang Tavousi Tehrani, Mohammad Zaman Kabir, "Thermal Buckling and Post-buckling of SMA Composite plates with various boundary conditions ", The 15th International Conference of Iranian Aerospace Society Civil Aviation Technology College, Tehran, 23-25 February, 2016, February 2016

Behrang Tavousi Tehrani, Mohammad Zaman Kabir, "Buckling of Rectangular Plates Partially Restrained along opposite Edges ", 3Th National Conference and 1th International Conference on Applied Researches in Electrical, Mechanical and Mechtronics Engineering, February 2016

Mehdi Saloo, Mohammad Zaman Kabir, Mohammad Reza Khedmati, Amin Moradi Momen, "The flexural and shear response of retrofitted RC beam by using FRP under explosion loading ", 3rd. international conference on civil Engineering, Architecture, and Urban Development, December 2015

Amin Kashi, Mohammad Zaman Kabir, Faramarz Moodi, "Numerical study on effect os ductility in the flextural capacity enhancement of RC beam strengthened with FRP ", Concrete Repair, rahabilitation and Retrofitting IV, October 2015

Mohammad Zaman Kabir, Seyyed Mohammad Mojtabaie, Mina Kargar, "Experimental and Numerical Investigation of Lateral Performance of Moment-Resisting Frames made of Cold-formed Steel Sections ", International Conference on Architecture, Structure and Civil Engineering (ICASCE15), September 2015

Mohammad Zaman Kabir, Erfan Shafei, "The Experimental Response Measurements of CFRP Retrofitted Shear Deficient RC beams under Concentrated Load ", International Conference on Architecture, Structure and Civil Engineering (ICASCE 15), September 2015

Seyed Mohammad Mehdi Noorbakhsh Dehkordi, Amir Moulavi Zadeh, Mohammad Zaman Kabir, "Study on the progressive failure of composite plate with opening based on the Puck criteria ", 23rd International Mechanical Engineers Conference, May 2015

Seyed Mohammad Mehdi Noorbakhsh Dehkordi, Mohammad Zaman Kabir, "Tensile buckling of orthotropic thin plate with open hole ", 23rd International Iranian Mechanical Engineers Conference, May 2015

Mohammad Zaman Kabir, Seyyed Mohammad Mojtabaie, "An analytical investigation of ductile moment-resisting connections using cold-formed steel sections ", 10th international congress on Civil Engineering, May 2015

Ali Karbassi, Mohammad Zaman Kabir, Amir Karbassi, "Theoretical and Numerical Study On Shear Buckling Of Flat and Corrugated Low-Gauge Steel Walls ", 10th International Congress on Civil Engineering, May 2015

Mohammad Zaman Kabir, Ata Hojatkashani, "Failure mechanism and Interfacial stress investigations into the CFRP retrofitted RC beams under high cycle fatigue loading considering experimental and numerical approaches ", 4th International Conference on Bridges, January 2015

Mohammad Zaman Kabir, Ali Karbassi, "Study of shear buckling of plain and corrugated thin walled steel shear wall ", 1st National Conference on Iranian Structural Engineering, January 2015

Mohammad Navi, Mohammad Zaman Kabir, "Buckling analysis of cracked FGM plate under mechanical loadings ", The 4th International Conference on Composites: Characterization, Fabrication and Application, December 2014

Hossein Zarrinzadeh, Mohammad Zaman Kabir, Ardeshir Deylami, "Extended Finite element analysis of Fatigue crack growth for a cracked shell repaired by composite patch ", The 4th International Conference on Composites: Characterization, Fabrication and Application, December 2014

Fatemeh Faghih Khorasani, Mohammad Zaman Kabir, Khosrow Ghavami, "A Review of Adobe Constructions, Properties and Rules ", 15th NOCMAT 2014-30 years, November 2014

Mohammad Zaman Kabir, Shohreh Alaedini, "Performance Estimation of CFRP retrofitted RC frames under cyclic loading ", The 7th international Conference on Fiber Reinforced Polymer (FRP) Composites in Civil Engineering, August 2014

Mohammad Amin Shahmohammadi, Mohammad Zaman Kabir, "Considering the nonlinear stability of functionally graded composites (FGC) under uniform internal and external pressure ", 2nd National conference on new material and structures, February 2014

Mohammad Zaman Kabir, Seyyed Mohammad Mojtabaie, "Seismic Performance of Innovative Flexural Bolted Connection of Portal Steel Frame of Cold Formed Members ", 2th National conference on Materials and innovative structures in Civil Engineering, February 2014

Mohammad Zaman Kabir, Alireza Nazari, Hossein Hosseini Toudeshky, "Damage Progression Characterization of GFRP composite Plates by 3D FE Modeling in Various Loading Conditions ", The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics, February 2014

Younes Alizadeh Vaghasloo, Alireza Nazari, Mohammad Zaman Kabir, "Investigation Of Load bearing behavior in composite sandwich 3pb beams with elastomeric foam core ", The Bi-Annual International conference on experimental solid mechanics and Dynamics (X-Mesh-2014), February 2014

Younes Alizadeh Vaghasloo, Alireza Nazari, Mohammad Zaman Kabir, "Investigation of Load bearing behavior in composite sandwich 3PB beams with elastomeric foam core ", The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics, February 2014

Erfan Shafei, Mohammad Zaman Kabir, "Response spectrum features of shear strengthened concrete beams under impact loading ", The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics, February 2014

Mohammad Zaman Kabir, Alireza Nazari, "ٍExperimental Measurements and Finite Element Characterization of hyperelastic Behavior in Elastomeric EVA Foam under uniaxial loading ", The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics ), February 2014

Mohammad Zaman Kabir, Shohreh Alaedini, "Application of Nanotechnology and Nanomaterials in civil Engineering ", The 5th International Conference on Structural Analysis of Advanced Materials( ICSAAM 2013 ), September 2013

Mohammad Zaman Kabir, Shohreh Alaedini, "seismic evaluation of FRP strengthened RC frame subjected to cyclic loading ", The 5th International Conference on Structural Analysis of Advanced Materials( ICSAAM 2013 ), September 2013

Mohammad Zaman Kabir, Erfan Shafei, "Modeling of shear failure type RC beams strengthened with FRP composite Laminates subjected to low velocity impact ", 17th International Conference on Composite Structures, June 2013

Mohammad Zaman Kabir, Mehdi Parvizi, Arash Askari, "Determination of residual stresses and strains in cold-formed steel members due to roll forming process ", 21th annual international conference on mechanical engineering, May 2013

Ghazaleh Eslami, Mohammad Zaman Kabir, "Multi objective optimization of orthogonally stiffened cylindrical shells subjected to non uniform external pressure ", 21th Annual International Conference on Mechanical Engineering, May 2013

Mohammad Zaman Kabir, Hadi Hejabi, "Experimental investigation of strengthened RC portal frame under combined cloading ", 4th international conference on concrete and development, April 2013

Mohammad Zaman Kabir, Shohreh Alaedini, "The influence of externally bonded FRP on performance and failure mechanism of 3D RC beam-column connection under combined axial and cyclic loading ", 4th international conference on concrete and development, April 2013

Mohammad Zaman Kabir, Hadi Hejabi, "Experimental investigation of GFRP strengthened RC portal frame under combined loading ", The 3th International Conference on Composite Charaterization, Fabrication and Application CCFA-3, December 2012

Mehdi Taherzadeh Esfahani, Mohammad Zaman Kabir, Hamid Reza Ovesy, "Local buckling of initially delaminated composite columns, using first order shear deformation theory ", The 3rd International Conference on Composite Charaterization, Fabrication and Application CCFA-3, December 2012

Mehdi Taherzadeh Esfahani, Mohammad Zaman Kabir, Hamid Reza Ovesy, "Local buckling of initially delaminated composite columns, using first order shear deformation theory ", The 3th International Conference on Composite Charaterization, Fabrication and Application CCFA-3, December 2012

Mohammad Zaman Kabir, Mehdi Motaleb, "Numerical flexural investigation of damaged steel concrete composite girders repaired by CFRP plates ", The 3th International Conference on Composite Charaterization, Fabrication and Application CCFA-3, December 2012

Mohammad Zaman Kabir, Arsalan Kalali, Reza Shahmoradi, "Cyclic behavior of perforated masonry walls strengthened with fiber reinforced polymers ", 15th world conference on earthquake engineering, September 2012

Hossein Momenilarimi, Mohammad Zaman Kabir, "Study on shear strengthening of RC beams with Near surface mounted method using FRP composite sheets ", 9th International Congress on Civil Engineering, May 2012

Mohammad Zaman Kabir, Ahmad Reza Jafari, "Numerical study on LAteral Torsional Buckling of Girders containing opening in web ", 9th International Congress on Civil Engineering, May 2012

Mohammad Zaman Kabir, Mehdi Motaleb, "Optimum Strengthening of Steel-Concrete Composite Beams using Pre-Stressed FRP Plates ", 9th International Congress on Civil Engineering, May 2012

Hossein Hosseini Toudeshky, Alireza Nazari, Mohammad Zaman Kabir, "Repair of Delaminated Composite Beams using FRP Jacket under Fatigue Loading Conditions ", 9th International Congress on Civil Engineering, May 2012

Mohammad Zaman Kabir, Ata Hojatkashani, "Experimental investigation of CFRP strengthened RC beams under monotonic and fatigue loading ", The international conference on experimental solid mechanics and dynamics, March 2012

Mohammad Zaman Kabir, Alireza Nazari, "Experimental study on the compressive load carrying capacity of FRP wrapped steel cylinders ", The International Conference on Experimental Solid Mechanics and Dynamics, March 2012

Mohammad Zaman Kabir, Parisa Shadan, "Seismic Performance of 3D Panel wall on Piloti RC Frame using Shaking Table Equipment ", 8th International Conference on Structural Dynamics, July 2011

Mohammad Zaman Kabir, Parisa Shadan, Fariba Shadan, "Enhancing the seismic performance of 3D panel wall on piloti frame using FRP laminated ", 6th International Conference on Seismology and Earthquake Engineering, May 2011

Mohammad Zaman Kabir, Hassein Kolahi, "Optimum Design of Girders with corrugated web ", 6th National Congress of Civil Engineering, April 2011

Mohammad Zaman Kabir, Erfan Shafei, "Flutter & Divergence Based Optimization of Laminated Composite Plates under Combined Loadings ", The Second International Conference on Composites: Characterization, Fabrication and Application, December 2010

Mohammad Zaman Kabir, Ali Ehsan Seif, "Inter-laminar stress consideration of lateral-torsional buckling of FRP-retrofitted steel-beam using first order shear deformation ", The Second International Conference on Composites: Characterization, Fabrication and Application, December 2010

Mohammad Zaman Kabir, Hamed Zadmehr, "Numerical investigation of micro-buckling failure mode in composite materials ", The Second International Conference on Composites: Characterization, Fabrication and Application, December 2010

Mohammad Zaman Kabir, Ata Hojatkashani, "Examination of interfacial stresses due to crack propagation in FRP retrofitted RC beams ", The 5th International Conference on FRP Composites in Civil Engineering- CICE 2010, September 2010

Mohammad Zaman Kabir, Ali Ehsan Seif, "Lateral torsional buckling of steel I-beam retrofitted using FRP sheets: analytical solution and optimization ", The 5th International Conference on FRP Composites in Civil Engineering-CICE 2010, September 2010

Hamid Reza Kazemi Nia Korrani, Mohammad Zaman Kabir, "‍Comparison on Lateral Torsional Buckling mode between Honey comb Girders and I sections ", 5th National congress on Civil Engineering, May 2010

Mohammad Zaman Kabir, Alireza Nazari, "Experimental investigation on repair of cracked steel cylinder under compression loading using FRP materials ", IMS/4 International conference on the application of traditional and high performance materials in harsh environment, March 2010

Mohammad Zaman Kabir, Ata Hojatkashani, "On the examination of the CFRP retrofitted RC beams at the critical region under fatigue loading ", IMS/4 International conference on the application of traditional and high performance materials in harsh, March 2010

Mohammad Zaman Kabir, Amir Homayoon Kosarieh, "The effects of stiffness alteration of the first floor in concrete precast 3D panel system supported on RC frames on its seismic responses ", 8th International Congress on Civil Engineering, May 2009

Mohammad Zaman Kabir, Amir Homayoon Kosarieh, "The effects of steel amount of the concrete precast 3D panel welded wire frame on their nonlinear and seismic behaviors ", 8th Int. Congress on Civil Engineering, May 2009

Mohammad Zaman Kabir, Alireza Nazari, "Reinforcement of Plates with various Aspect Ratios against Elastic Axial Buckling using Externally bonded FRP Patches ", 8th International conference on Civil Engineering, May 2009

Ramin Mahmoodzade Andvari, Mohammad Zaman Kabir, "Performance Factor estimation of steel non-stiffened shear wall ", 8th International Congress on Civil Engineering, May 2009

Mohammad Zaman Kabir, Alireza Nazari, "Reinforcement of plastes with various aspect ratios against eleastic axial buckling using externally bonded FRP patches ", , May 2009

Mohammad Zaman Kabir, Ramin Mahmoodzade Andvari, "Study of cyclic behavior of steel shear wall ", 8th International Congress on Civil Engineering, May 2009

Mohammad Zaman Kabir, "Flexural upgrading of steel concrete composite girders using externally bonded CFRP reinforcement ", , December 2008

Mohammad Zaman Kabir, "Enhancing of stability capacity of thin metal plates using bonded composite patch ", , December 2008

Mohammad Zaman Kabir, "Inelastic seismic performance of concrete precast 3D panel system with discontinuous shear walls supported on RC frames ", , October 2008

Mohammad Zaman Kabir, "Structural perfomance of retrofitting bridge deck slabs using CFRP strips under cycleic loading ", , October 2008

Mohammad Zaman Kabir, Hamid Yadollahi Omran, "Study of RC beams strengthened in flexure with near surface mounted CFRP strips by numerical and analytical modeling ", , September 2008

Mohammad Zaman Kabir, "Numerical investigation of strengthening twoway concrete slabs with FRP strips subjected to transverse loading ", , September 2008

Mohammad Zaman Kabir, Ali Mansouri, "Numerical investigation of the behavior of FRP wrapped RC slender columns under eccentric loading ", , September 2008

Mohammad Zaman Kabir, Hamid Yadollahi Omran, "Numerical and analytical modeling of RC beams strengthened in flexure with near surface mounted CFRP strips ", 4th National congress on Civil Engineering, May 2008

Hamid Yadollahi Omran, Mohammad Zaman Kabir, "Cost optimization of composite floor using I shape steel girders ", 4th National Congress on Civil Engineering, May 2008

Mohammad Zaman Kabir, [en-name N/A], "Evaluation of the accuracy of white light PIV technique for flow velocity measurement ", , September 2007

Mohammad Zaman Kabir, "An investigation on ductility of RC frame in filled with un- reinforced masonry wall subjected to cyc ", , September 2006

Mohammad Zaman Kabir, "Numerical study of single story building constructed using 3D panel prefabricated system under seismic ground motions ", , September 2006

Mohammad Zaman Kabir, "Shaking table test of full- scale single story building of 3D - panel prefabricated system ", , September 2006

Mohammad Zaman Kabir, Said Reza Shahmoradi, Omid Rezaifar, "Non-linear response of experimental and numerical modelling of combined system, 3D wall panel and bending RC frame, subjected to seismic loading ", , August 2006

Mohammad Zaman Kabir, Omid Rezaifar, Masood Taribakhsh, Amir Tehranian, "Shaking table test of full scale single storey building of 3D panel prefabricated system ", , May 2006

Mohammad Zaman Kabir, Omid Rezaifar, Masood Taribakhsh, Amir Tehranian, "Stude of seismic performance of building constructed in 3D panel pre-fabricated system using shaking table ", , April 2006

Mohammad Zaman Kabir, "Experimental relation between non destructive test and standard cylinder in shotcrete used in bearing 3D wall panels ", , September 2005

Mohammad Zaman Kabir, "Experimental and numerical investigation of combined system,3d wall panels and bending frame subjected to cyclic loading. ", , June 2005

Mohammad Zaman Kabir, "Non _ linear response of combined system,3D wall panels and bearing steel frame subjected to seismic loading. ", , May 2005

Mohammad Zaman Kabir, "experimental and numerical investigation of combined system 30 wall panels and bending frame subjected to cyclic loading ", , March 2005

Mohammad Zaman Kabir, Ali Reza Karimi Khoshhal, "Upgradieg shear resistance of deep rc beams with composite fibrics ", , July 2004

100

Mohammad Zaman Kabir, Davood Poorveis, "stability Analysis of circumferentially stiffened tamirated cylindrical shells under combined axial and external pressure ", , June 2004

101

Mohammad Zaman Kabir, Omid Rezaifar, "non _ linear dynamic behavior of combined system on rc frame precast 3d wall panels with irregularities in vertical stiffness ", , March 2004

102

Mohammad Zaman Kabir, , Alireza Rahbar, "An Estimation of Ductility and Behaviour Factor of 3D Sandwich Panels Subjected to Shear Loading. ", , September 2003

103

Mohammad Zaman Kabir, Davood Poorveis, [en-name N/A], "Stability Analysis of Stiffened Laminated Cylindrical Shells Under Combined Axial and external loads . ", , January 2003

104

Mohammad Zaman Kabir, Hamidreza Ashrafi, Mohsen Najimi Varzaneh, "Mechanical properties of 3D wall panels under shear and flexural loading ", , June 2002

105

Mohammad Zaman Kabir, Hamidreza Ashrafi, Mohsen Najimi Varzaneh, "upgrading dactilty of rc beam _ column connetion with high per fer mance 4rp ", , March 2002

106

Mohammad Zaman Kabir, Ali Reza Taghavee Kanee, "Non _ linear Behavior of thin _ walled cylindrical shells with lateral open .... ", , August 2001

107

Mohammad Zaman Kabir, Seyedhossein Mousavi, "Non linear behanior of thin walled open section composite beams in lateral stability ", , September 2000

108

Mohammad Zaman Kabir, Mohammd Ali Pourakgtarieh, "OPTIMAL FIBRE ORIENTATIONS ON POSTBUCKLING STIFFNESS OF RECTANGULAR LAMINATED COMPOSITE PLATES ", , May 2000

109

Mohammad Zaman Kabir, Seyedhossein Mousavi, "interactive buckling of: I- section composite beams ", , December 1997

110

Mohammad Zaman Kabir, "A finite element prescutation of an optimum design for filament winding compnsite pressure vessels ", , January 1997

111

Mohammad Zaman Kabir, "interactive buckling in fibrous pultruded: I-Section composite beams ", , January 1997

112

Mohammad Zaman Kabir, "Interactive bucking in composite: I beams: ", , January 1996

113

Mohammad Zaman Kabir, "Computer analysis of filament over wrapped metalic pressure vessels with an optimun head shape ", ,

Taught Courses

Course title

Description

Headlines

Date

Structural Stability

To introduce grad structure students with principles of stability of members, structures and their application in design criteria

Spring 2024

Strength of Material Lab.

Learning of under graduate students with experimental measurements of deformation and stresses in structural members under various loading

Spring 2024

Strength of Materials (I)

Introducing fundamental concepts of Solid Mechanics to the 2th year Civil Engineering Students including: stress and strength deformation and rigidity in elastic and non elastic domain under various static loading

Spring 2024

Strength of Material Lab.

Learning of under graduate students with experimental measurements of deformation and stresses in structural members under various loading

Spring 2024

Mechanics of Composite Materials

Learning of Postgraduate students with fundamental concept of mechanical behavior and strength of polymeric based composite materials.

Fall 2023

Strength of Material Lab.

Learning of under graduate students with experimental measurements of deformation and stresses in structural members under various loading

Fall 2023

Strength of Materials (I)

Fall 2023

Structural Stability

To introduce grad structure students with principles of stability of members, structures and their application in design criteria

Spring 2023

Optimization

Introduction and basic concept to structural optimization for post graduate students in the field of Civil and Mechanical engineering

Spring 2023

Strength of Material Lab.

Learning of under graduate students with experimental measurements of deformation and stresses in structural members under various loading

Spring 2023

Strength of Materials (I)

Spring 2023

Mechanics of Composite Materials

Learning of Postgraduate students with fundamental concept of mechanical behavior and strength of polymeric based composite materials.

Fall 2022

Strength of Material Lab.

Learning of under graduate students with experimental measurements of deformation and stresses in structural members under various loading

Fall 2022

Strength of Material Lab.

Learning of under graduate students with experimental measurements of deformation and stresses in structural members under various loading

Fall 2022

Strength of Materials (I)

Fall 2022