Nader Parvin - Amirkabir University of Technology

Special services: Faculty Members Students Graduates

Content

Pepole

Amirkabir University of Technology

Resume Service

Nader Parvin

Professor
Department of Materials and Metallurgical Engineering
Materials Production and Synthesis

Download PDF فارسی

Email:

nparvin

aut.ac.ir

Phone:

+9821 64542911

h-index (Scopus):

34.00

Citations (Scopus):

4559

Supervised PhD Theses

Thesis title

Date

Fatigue and compressive behavior of functionally graded Titanium-Nano Hydroxyapatite produced by powder metallurgy method

BITA DERAKHSHANI

2023 Dec

Cold Sintering of ZnO-Based Nanocomposite Containing MoS2 Nanoparticles to Modify Tribological Properties

KAVEH RAHIMI MAMAGHANI

2023 Oct

Supervised MSc Theses

Thesis title

Date

Fabrication and Investigation of Biocompatibility of Biodegradable Ureteral Stent Using Magnesium-Based Alloy

FATEMEH AKHLAGHI

2024 Oct

Evaluation Of Mechanical Properties Of TPMS-Based Nitinol with Gradient Lattice Structures For Bone Implants

SEPEHR SALIMY

2024 Sep

Investigation of Nickel-base Super alloy Brazing behavior of IN738 by modified Ancorbraze AB72

MAJID KESHAVARZIAN

2024 Aug

Investigation wear properties of Ti-HA composite by powder metallurgy

YEGANE SAEED GHANEI

2024 Jul

Synthesis of mesoporous multi-layer core-shell silica nanostructure powder and investigation of its specific surface area and porosity

MARZIEH ALIKHANI GALEH

2024 Jun

Synthesis, characterization and investigation of electrical properties of V2O5/RGO nanocomposite by cold sintering

NIMA SAATIAN

2023 Jul

Synthesis and characterization of multi-layer core-shell silica nanostructure

SAMIRA RANJBAR

2023 Jul

Densification and strengthening of mechanically activated Mg/Ca alloys by spark plasma sintering

PARISA GOLMOHAMMADI

2022 Jun

Synthesis and Characterization of Nickel-based Brazing pastes for repair of Superalloy components

ALI ZANDIFAR

2021 Sep

Synthesis and characterization of Nickel-base Nano-powders which use in brazing of Gas Turbine components and study about effects of additive elements on that properties

SEYED EMADODDIN HOSSEINI

2020 Aug

Synthesis, Characterization and Cytotoxicity of Co1-xNixFe2O4/ Polymer Nanoparticles by Sol Gel method

AMIRHOSSEIN ESMAEIL KHANIAN

2020 Feb

Synthesis and characterization of bioactive glass containing zinc oxide and strontium oxide by sol-gel method

ZAHRA GOUDARZI

2020 Jan

Effect of process parameters on permeability and mechanical properties of Stainless Steel 316L Filters

HAMED GHOLAMZADEH

2019 Apr

The effect of additives on compressibility and sinterability of porous x2crNiMo18 steel by Process of Powder Metallurgy

AMIR IJADI

2019 Apr

The Effect of selective laser melting parameter on Microstructure and Porosity morphology of stainless steel 316L

YASHAR AZARMEHR

2018 Feb

Characterization of NiTi Coating on Stainless Steel 3161 substrate with Laser Cladding

KIAN ZARGHAMI

2018 Feb

Effect of ZrO2 volume fraction on mechanical and corrosion properties of Cr2O3-SiC-ZrO2 Plasma coatings

MILAD YOUSEFI MOKRI

2017 Jul

Investigation of properties of brazed powder metallurgy compacts using Ancorbraze 72

ADNAN NAJI SHAKEER AL DUJAILI

2017 May

The effect of soldering prameters on mechanical and electrical properties of silver joint

SEPEDEH MOUSAVI & HAMID OMIDVAR

2016 May

Fabrication and Characterization of W-Cu Functionally graded Material by Powder Metallurgy

ALI YUSEFI

2016 Jan

Compaction Behavior of Powder Metallurgy Processed of AL/SiC Composite

HADI NADERI SEGHIN SARA & ALIREZA FALLAHI AREZODAR

2015 Dec

Comparison and characterization of Al-Al203 composite made by powder metallurgy and accumulative press bonding processes

MASOOMEH ASKARIAN

2015 Dec

Design of joint and brazing of tungsten carbide to a drilling stabilizer

ALI AMIRNASIRI

2015 Oct

The effect of pin geometry on the flow of material in friction stir welding of AA 6061 plates with nanoparticles

RAMONA JAVADI DOODRAN

2015 Oct

Investigation of microstructure and mechanical properties of brazed WC/Steel joint zone

MAHDI SHAFIEI HAGHSHENAS

2015 Feb

.Optimization Hydrothermal Synthesis of Sr Hexaferrite for Absorbing Electromagnetic Waves in the Range of 8-12 GHz

EBRAHIM ZADEH SOLEIMANI

2014 Dec

Effect of reinforcing nano particles on the properties of friction stir welding of aluminium 6061

MOHSEN FARAHMAND NIKOO

2014 Sep

The effect of plasid deformation and aging on nickel-rich NiTi Shape memory alloy microstrucure and trnsformation temperatures

SAKO PIRANI

2014 Jan

Brazing of copper foil to brass and investigation of electrical properties

MANOOCHEHR EBADI ASAR

2013 Oct

Study of the corrosion behavior of anodized Ni-Ti shape memory alloy

MARYAM POURMAHDAVI

2013 Oct

Synthesis of nano-porous magnesium oxide powder by hydrothermal method

ABDOLLAH ALLAHVERDIZADEH

2013 Oct

Preparation and characterizations of uniform TiO2 membrane on porous 316L stainless steel by sol-geldip coating for nanofiltration process

FATEMEH MOHAMADI HAJIBEKANDEH

2013 Feb

Self-propagating high-temperature synthesis of two reinforcers simultaneous reinforced NiAl nano composite powder

ALI AKBAR SHOKATI

2012 Feb

ELHAM SALEHOON

2012 Jan

The effect of Nobel metal on the properties of SnO2 nano composite

ALI SHARIFIAN JAZI

2011 Oct

Fabrication of Stainless Steel ultrafine pore Membrane Supports

SEYED MOHAMMAD HOSSEIN PIGHANBARZADEH

2011 Jun

Effect of

MEHDI TAHERI SHARGH & HAMID OMIDVAR

2011 Feb

Investigation of effective parameters on oxidation resistance of Al-Cr coating after Aluminizing-Chromizing process

YOUSEF SEDIGH BIJARPAS

2011 Feb

SANAM ABEDINI DERESHGY

2011 Feb

bbba

SEYEDALI HOSSEINI

2011 Feb

manufacturing of Cu-based shape memory alloy by powder metallurgy

SAJJAD POURKHORSHIDI

2010 Jun

Synthesis of ultra magnetic alloy particles by reduction of their chlorides in vapor phase

ALI BATENI & Sadegh Firoozi

2010 Jun

Synthesis of Ag-ZnO nano composite by coprecipitation process

MOHAMMAD REZA RABIEI

2010 Jun

synthesis of Ag-SnO2 nano composite by coprecipitation process

FARIDEH SHAKERIAN

2010 Jan

casting of A356/TiB2pcomposite based on the TiB2/CMC/PPS mortar

MOHAMMAD HIZOMBAR & SEYED MOHAMMAD H. MIRBAGHERI

2009 Feb

THE EFFECT OF ADDITIVES ON INTERNAL OXIDATION OF Ag-Cd ALLOY

ASHKAN NASEH

2008 Sep

INVESTIGATION ON TOUGHNES OF GEOPOLYMER COMPOSITES WITH REINFORCED FIBER

EHSAN GOHARI BEHJAT ABADI & JAMSHID AGHAZADEH MOHANDESI

2007 May

EFFECTS OF MILLING PARAMETERS ON CHARACTERISTICS OF W-CU NAOCOMPOSITE, PREPARED BY MECHANICAL MILLING

SIAMAK EGHTESADI

2007 Feb

THE EFFECT OF THERMO MECHANICAL TREATMENT ON THE PROPERTIES OF POWDER METALLURGY TUNGSTAN ALLOYS

HOOYAR ATTAR

2007 Feb

Mechanical and Wear Properties of ZnO/WC Ceramics Synthesized By Cold Sintering method

HADI PIRJAMALI

2025 Oct

Journal Papers

RAHIMI MAMAGHANI KAVEH ، Parvin Nader, "Cold sintering for in-space materials fabrication: a science, engineering, and future directions", Multiscale and Multidisciplinary Modeling Experiments and Design, 2026 Dec vol. 9, no. 86, pp.-, 2026.

Fartashvand Vahid ، ABDULLAH AMIR ، Abedini Rezvan ، Parvin Nader, "Analytical Evaluation of High Power Ultrasonic Assisted Cold Compaction of Titanium Powder", Journal of Particle Science and Technology, 2026 Jul vol. , no. , pp.1-17, 2026.

RAHIMI MAMAGHANI KAVEH ، Parvin Nader, "Designing the Future of Hardmetals Through Cold Sintering and Green Processing", Journal of The American Ceramic Society, 2026 Jul vol. 109, no. , pp.1-24, 2026.

RAHIMI MAMAGHANI KAVEH ، Alikarami Marzieh ، Saremi Hossein ، Parvin Nader, "Antifungal Nanoparticles in Microbial Biotechnology: Multisector Mechanisms, Applications, and Future Frontiers", Iet Nanobiotechnology, 2026 Jan vol. 2026, no. , pp.1-24, 2026.

RAHIMI MAMAGHANI KAVEH ، Parvin Nader ، Rajabzadeh Mostafa, "Cold-sintered hybrid nanostructures for biomedical drug delivery: A nanomanufacturing pathway toward clinical translation", Nano Trends, 2025 Oct vol. 12, no. , pp.1-18, 2025.

RAHIMI MAMAGHANI KAVEH ، Parvin Nader, "Cold sintering for quantum ceramics: A low-temperature route to topological and spin-orbit-coupled materials", Journal of Alloys and Compounds Communications, 2025 Sep vol. 8, no. , pp.1-13, 2025.

RAHIMI MAMAGHANI KAVEH ، Parvin Nader, "The measurement and improvement of tensile strength in cold sintered Zinc Oxide", Materials Chemistry and Physics, 2025 Mar vol. , no. , pp.-, 2025.

GOLMOHAMMADI PARISA ، ، ، Parvin Nader ، Woo Jin Kim, "Spark plasma sintering of a novel Mg-0.7 Ca alloy: A comprehensive study", Journal of Magnesium and Alloys, 2025 Feb vol. , no. , pp.-, 2025.

Fartashvand Vahid ، Abedini Rezvan ، KHAN MOHAMMADI RAHELEH ، ABDULLAH AMIR ، Parvin Nader, "Ultrasonic Assisted Cold Compaction of CP-Titanium and Ti-6Al-4V Alloy", Journal of Particle Science and Technology, 2024 Nov vol. 2, no. 10, pp.87-96, 2024.

DERAKHSHANI BITA ، Parvin Nader ، Mohammad Khodai, "Influence of sintering temperature on the mechanical properties and biocompatibility of titanium-nano hydroxyapatite functionally graded materials", Journal of Materials Research and Technology-Jmr and T, 2023 Oct vol. 27, no. 0, pp.2538-2547, 2023.

RAHIMI MAMAGHANI KAVEH ، Parvin Nader, "The mechanical and tribological properties of ZnO/MoS2 Nanocomposite fabricated by cold sintering", Materialia, 2023 Jul vol. 30, no. 844, pp.1529-1539, 2023.

RAHIMI MAMAGHANI KAVEH ، Parvin Nader, "Preparation and properties of bulk Zno/MoS2 nanocomposite by cold sintering process with three component solvent", International Journal of Material Science(Ijmsci), 2023 Jul vol. 1223, no. 58, pp.12182-12201, 2023.

IJADI AMIR ، NAYEBI BEHZAD ، Parvin Nader ، Ali Kaflou, "Characteristics of porous SS316L Influences of Sn additive on interfacial phenomena during pressureless sintering.", Materials Chemistry and Physics, 2022 Nov vol. 295, no. 1, pp.1-12, 2022.

NAYEBI BEHZAD ، Seyed Ali Delbari ، Mehdi Shahedi Asl ، Ehsan Ghasali ، Parvin Nader ، Mohammadreza Shokouhimehr, "A nanostructural approach to the interfacial phenomena in spark plasma sintered TiB2 ceramics with vanadium and graphite additives", Composites Part B-Engineering, 2021 Oct vol. 0, no. 222, pp.1-13, 2021.

ESMAEIL KHANIAN AMIRHOSSEIN ، fariborz sharifian jazi ، Parvin Nader ، Mohammad Amin Kooti, "Cytotoxicity of thermoresponsive core/shell NixCo1?xFe2O4/PEG nanoparticles synthesized by the sol-gel method", Journal of Physics D-Applied Physics, 2021 Jul vol. 54, no. 29, , 2021.

ZARGHAMI KIAN ، Saeed Khademzadeh ، Parvin Nader ، AZARMEHR YASHAR, "The role of scanning velocity on laser cladding of NiTi alloy onto stainless steel 316L substrate", International Journal of Advanced Manufacturing Technology, 2021 May vol. 117, no. 21, pp.2029-2039, 2021.

Mehdi Shahedi Asl ، NAYEBI BEHZAD ، Soroush Parvizi ، Zohre Ahmadi ، Parvin Nader ، Mohammadreza Shokouhimehr ، Mohsen Mohammadi, "Toughening of ZrB2-based composites with in-situ synthesized ZrC from ZrO2 and graphite precursors", Journal of Science-Advanced Materials and Devices, 2021 Mar vol. 1, no. 6, pp.42-48, 2021.

NAYEBI BEHZAD ، Parvin Nader ، Mehdi Shahedi Asl ، Amir Motallebzadeh ، Mohamadreza Shokouhimehr, "Nanostructural and nanoindentation characterization of ZrB2 ceramics toughened with in situ synthesized ZrC", International Journal of Refractory Metals and Hard Materials, 2020 Oct vol. 94, no. 105391, pp.1-11, 2020.

AKHLAGHI PARISA ، Mostafa Amirjan ، Parvin Nader, "The effect of processing parameters and heat treatment on the microstructure and mechanical properties of PM CoCrFeMnNiTi0.1 high entropy alloy", Materials Chemistry and Physics, 2020 Sep vol. 257, no. 123722, pp.1-9, 2020.

NAYEBI BEHZAD ، Parvin Nader ، AGHAZADEH MOHANDESI JAMSHID ، Mehdi Shahedi Asl, "Effect of Zr and C co-addition on the characteristics of ZrB2-based ceramics: Role of spark plasma sintering temperature", Ceramics International, 2020 Jul vol. 16, no. 46, pp.24975-24986, 2020.

NAYEBI BEHZAD ، Parvin Nader ، AGHAZADEH MOHANDESI JAMSHID ، Mehdi Shahedi Asl, "Densification and toughening mechanisms in spark plasma sintered ZrB2-based composites with zirconium and graphite additives", Ceramics International, 2020 Jun vol. 46, no. 9, pp.13685-13694, 2020.

SHARIFIAN JAZI FARIBORZ ، mostafa moradi ، Parvin Nader ، ali nemati ، azadeh jafari rad ، nilofar sheysi ، aliasghar abochenari ، ali mohamadi ، saeed karbasi ، zohre ahmadi ، ESMAEIL KHANIAN AMIRHOSSEIN ، mohammad irani ، Amirhosein Pakseresht ، Saeid Shamani ، Mehdi Shahedi Asl, "Magnetic CoFe2O4 nanoparticles doped with metal ions: A review", Ceramics International, 2020 Apr vol. 46, no. 11, pp.18391-18412, 2020.

TASHI ZEINAB ، ZARE MOHADESEH ، Parvin Nader, "Application of phytic-acid as an in-situ crosslinking agent in electrospun gelatin-based scaffolds for skin tissue engineering", Materials Letters, 2019 Dec vol. 264, no. 127275, , 2019.

HASHEMI SEYED MAHDI ، Parvin Nader ، Zia Valefi ، Mostafa Alishahi, "Comparative study on tribological and corrosion protection properties of plasma sprayed Cr2O3-YSZ-SiC ceramic coatings", Ceramics International, 2019 Dec vol. 45, no. 17, pp.21108-21119, 2019.

Vahid Salimian Rizi ، Fariborz Sharifianjazi ، Hassan Jafarikhorami ، Parvin Nader ، Leyla Saei fard ، Mohammad Irani ، ESMAEIL KHANIAN AMIRHOSSEIN, "Sol-gel derived SnO2/Ag2O ceramic nanocomposite for H2 gas sensing applications", Materials Research Express, 2019 Nov vol. 6, no. 11, pp.12-18, 2019.

Maryam Akbari ، Asal Hosseini Monazzah ، Parvin Nader ، Khosrow Rahmani, "Fabrication and Characterization of NiO/YSZ Composite via Cold Press-Sintering Method", , 2019 Nov vol. 52, no. 10, pp.2759-2778, 2019.

AMIRNASIRI ALI ، SHAFIEI HAGHSHENAS MAHDI ، Parvin Nader, "Damaging of cemented carbide end mill with different grain sizes: experimental and simulation", Rare Metals, 2019 Nov vol. 0, no. 0, pp.671-678, 2019.

ZARE MOHADESEH ، Parvin Nader ، Molamma Prabhakaran ، AGHAZADEH MOHANDESI JAMSHID ، Seeram Ramakrishna, "Highly porous 3D sponge-like shape memory polymer for tissue engineering application with remote actuation potential", Composites Science and Technology, 2019 Oct vol. 184, no. 0, pp.1-10, 2019.

Ali sebea hammood ، L.Thair ، Hanaa Diab Altawaly ، Parvin Nader, "Tribocorrosion Behaviour of Ti-6Al-4V Alloy in Biomedical Implants: Effects of Applied Load and Surface Roughness on Material Degradation", Journal of Bio- and Tribo-Corrosion, 2019 Aug vol. 5, no. 85, , 2019.

AMIRNASIRI ALI ، Parvin Nader ، SHAFIEI HAGHSHENAS MAHDI, "Investigation of Surface Roughness Parameter in DissimilarDiffusion Brazing of WC-Co to AISI 4145 Steel", Welding In The World, 2019 Jul vol. 0, no. 0, , 2019.

GOUDARZI ZAHRA ، Parvin Nader ، SHARIFIAN JAZI FARIBORZ, "Formation of hydroxyapatite on surface of SiO2- P2O5-CaO-SrO-ZnO bioactive glass synthesized through sol-gel route", Ceramics International, 2019 Jun vol. 0, no. 0, , 2019.

ESMAEIL KHANIAN AMIRHOSSEIN ، SHARIFIAN JAZI FARIBORZ ، aliasghar abochenari ، amirreza rohani ، Parvin Nader ، mohammad irani, "Synthesis and Characterization of Natural Nano-hydroxyapatite Derived from Turkey Femur-Bone Waste", Applied Biochemistry and Biotechnology, 2019 May vol. 2019, no. 189, pp.919-932, 2019.

ZARE MOHADESEH ، molamma p prabhakaran ، Parvin Nader ، seeram ramakrishna, "Thermally-induced two-way shape memory polymers: Mechanisms, structures, and applications", Chemical Engineering Journal, 2019 May vol. 374, no. 1, pp.706-720, 2019.

HASHEMI SEYED MAHDI ، Parvin Nader ، Zia Valefi, "Effect of Addition of Multimodal YSZ and SiC Powders on the Mechanical Properties of Nanostructured Cr2O3 Plasma-Sprayed Coatings", Journal of Thermal Spray Technology, 2019 Feb vol. 28, no. 3, pp.544-562, 2019.

HASHEMI SEIEDMAHDI ، Parvin Nader ، ziyae valefi, "Comparison of mechanical properties of nanostructured Cr2O3 and Cr2O3-20YSZ plasma-sparayed coatings", , 2019 Jan vol. 14, no. 38, pp.1-17, 2019.

HASHEMI SEIEDMAHDI ، Parvin Nader ، ziyae valefi, "Improving mechanical properties of nanostructured Cr2O3 plasma sprayed coating through formation of Cr2O3-20YSZ-10SiC nanocomposite coatings", Journal of Advanced Materials In Engineering, 2018 Dec vol. 7, no. 4, pp.11-23, 2018.

HASHEMI SEYED MAHDI ، Parvin Nader ، ZOHOR VALEFI, "Effect of microstructure and mechanical properties on wear behavior of plasma-sprayed Cr2O3-YSZ-SiC coatings", Ceramics International, 2018 Nov vol. 0, no. 0, , 2018.

Maryam Akbari ، Asal Hoseini Monazah ، Parvin Nader ، khosro rahmani, "Synthesis and Characterization of NiO/YSZ Composite by Cold Pressing and Sintering", Amirkabir Journal of Mechanical Engineering, 2018 Jun vol. 50, no. 4, pp.525-532, 2018.

HASHEMI SEIEDMAHDI ، Parvin Nader ، ziyae valefi, "Corrosion behaviour of plasma-aprayed Cr2o3 and Cr2o3-20YSZ coating in 3.5wt% NACL solution with and without sealing", , 2018 May vol. 8, no. 19, pp.1-15, 2018.

YUSEFI ALI ، Parvin Nader ، MOHAMMADI HOSSEIN, "WCu functionally graded material: Low temperature fabrication and mechanical characterization", Journal of Physics and Chemistry of Solids, 2017 Dec vol. 115, no. 0, pp.26-35, 2017.

SHARIFIAN JAZI FARIBORZ ، Parvin Nader ، Mohammadreza Tahriri, "Synthesis and characteristics of sol-gel bioactive SiO2-P2O5-CaO-Ag2O glasses", Journal of Non-Crystalline Solids, 2017 Nov vol. 476, no. 0, pp.108-113, 2017.

SHAFIEI HAGHSHENAS MAHDI ، Parvin Nader ، AMIRNASIRI ALI, "Effect of Bonding Temperature on Microstructure and Mechanical Properties of WC-Co/Steel Diffusion Brazed Joint", Transactions of The Indian Institute of Metals, 2017 Sep vol. 71, no. 3, pp.649-658, 2017.

HASSANEN L.JABER ، ALI SABEA HAMMOOD ، Parvin Nader, "Synthesis and characterization of hydroxyapatite powder from natural Camelus bone", Journal of The Australian Ceramic Society, 2017 Aug vol. 0, no. 0, , 2017.

SHARIFIAN JAZI FARIBORZ ، Parvin Nader ، mohamadreza tahriri, "Formation of apatite nano-needles on novel gel derived SiO2-P2O5-CaO-SrO-Ag2O bioactive glasses", Ceramics International, 2017 Aug vol. 43, no. 17, pp.15214-15220, 2017.

AMIRNASIRI ALI ، Parvin Nader ، SHAFIEI HAGHSHENAS MAHDI, "Dissimilar Diffusion Brazing of WC-Co to AISI 4145 steel using RBCuZn-D interlayer", Journal of Manufacturing Processes, 2017 Jun vol. 28, no. 1, pp.82-93, 2017.

YUSEFI ALI ، Parvin Nader, "Fabrication of three layered W-Cu functionally graded composite via spark plasma sintering", Fusion Engineering and Design, 2016 Dec vol. 114, no. 0, pp.196-202, 2016.

SALEHOON ELHAM ، seyed javad ahmadi ، Seyed Mohammad Razavi ، Parvin Nader, "Thermal and corrosion resistance properties of unsaturated polyester/clay nanocomposites and the effect of electron beam irradiation", Polymer Bulletin, 2016 Aug vol. 5, no. 74, pp.1629-1647, 2016.

AMIRKHANLOU SAJJAD ، MEHDI RAHIMIAN ، KETABCHI MOSTAFA ، Parvin Nader ، YAGHINALI PARISA ، FERNANDO CARRENO, "Strengthening Mechanisms in Nanostructured Al/SiCp Composite Manufactured by Accumulative Press Bonding", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2016 Jul vol. ., no. 0, , 2016.

FARAHMAND NIKOO MOHSEN ، AZIZI VARZEGHANI HESAM ، Parvin Nader ، YOSEFPOUR NAGHIBI HASSAN, "The influence of heat treatment on microstructure and wear properties of friction stir welded AA6061-T6/Al2O3 nanocomposite joint at four different traveling speed", Journal of Manufacturing Processes, 2016 Apr vol. 22, no. 0, pp.90-98, 2016.

KHADEMZADEH SAEED ، somone carmignato ، Parvin Nader ، filippo zanini ، PAOLO.F BARIANI, "Micro porosity analysis in additive manufactured NiTi parts using micro computed tomography and electron microscopy", Materials and Design, 2016 Jan vol. 90, no. 0, pp.745-752, 2016.

ehsan gharibshahian ، abas honarbaksh raouf ، Parvin Nader, "Microstructural evolution in friction stir welded API 5L-X52 steel", International Advanced Research Journal In Science ,Engineering and Technology, 2015 Nov vol. 2, no. 11, pp.64-70, 2015.

KHADEMZADEH SAEED ، MOHAMMAD REZA TOROGHI NEJAD ، FAHKREDIDIN ASHRAFIZADEH ، Parvin Nader, "Microstructure and mechanical properties of Al-Cu composite produced by accumulative roll bonding and folding (ARBF)", International Journal of Microstructure and Materials Properties, 2015 Oct vol. 10, no. 3, pp.159-171, 2015.

FARAHMAND NIKOO MOHSEN ، Parvin Nader ، BAHRAMI MOHSEN, "Al2O3-fortifed AA6061-T6 joint produced via friction stir welding: The effects of traveling speed on microstructure, mechanical, and wear properties", Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 2015 Oct vol. 0, no. 0, pp.1-10, 2015.

HAMDOLLAHZADEH KIVI ARZHANG ، BAHRAMI MOHSEN ، FARAHMAND NIKOO MOHSEN ، YUSEFI ALI ، mohamad kazem besharati givi ، Parvin Nader, "Microstructure evolutions and mechanical properties of nano-SiC-fortified AA7075 friction stir weldment: The role of second pass processing", Journal of Manufacturing Processes, 2015 Sep vol. 0, no. 0, pp.376-373, 2015.

KHADEMZADEH SAEED ، Parvin Nader ، PAOLO.F BARIANI ، FEDERICO MAZZUCATO, "Effects of micro laser sintering process parameters on quality of nickel-titanium single tracks and thin walls", Metals and Materials International, 2015 Aug vol. 0, no. 0, , 2015.

KHADEMZADEH SAEED ، Parvin Nader ، paolo f. bariani, "Production of NiTi alloy by direct metal deposition of mechanically alloyed powder mixtures", International Journal of Precision Engineering and Manufacturing, 2015 Aug vol. 16, no. 11, pp.2333-2338, 2015.

MAJID KHODAEI ، Parvin Nader, "The effect of different melt treatments on alloying element distribution and mechanical properties of A356 aluminum alloy", Russian Journal of Non-Ferrous Metals, 2015 Jul vol. 56, no. 3, pp.261-266, 2015.

MANSOURI TEHRANI ARIA ، SHAHROKHSHAHI HAMIDREZA ، Parvin Nader ، j.rgoch, "Influencing the martensitic phase transformation in NiTi through point defects", Journal of Applied Physics, 2015 Jul vol. 118, no. 0, pp.1-5, 2015.

HAMDOLLAHZADEH KIVI ARZHANG ، BAHRAMI MOHSEN ، FARAHMAND NIKOO MOHSEN ، YUSEFI ALI ، mohamad kazem besharati givi ، Parvin Nader, "Studying the effects of second pass processing on the microstructure and mechanical properties of AA7075/SiC joint produced via friction stir welding", Journal of Manufacturing Processes, 2015 Jun vol. 0, no. 0, , 2015.

MOHAMADI HAJIBEKANDEH FATEMEH ، Parvin Nader, "Preparation and characterization of TiO2 membrane on porous 316 L stainless steel substrate with high mechanical strengh", Membrane and Water Treatment, 2015 Mar vol. 6, no. 3, pp.251-262, 2015.

AMIRKHANLOU SAJJAD ، KETABCHI MOSTAFA ، Parvin Nader ، Alberto Orozco-Caballero ، Fernando Carreno, "Homogeneous and ultrafine-grained metal matrix nanocomposite achieved by accumulative press bonding as a novel severe plastic deformation process", Scripta Materialia, 2015 Feb vol. 100, no. 0, pp.40-43, 2015.

AMIRKHANLOU SAJJAD ، KETABCHI MOSTAFA ، Parvin Nader ، ASKARIAN MASOOMEH ، FERNANDO CARRENO, "Achieving ultrafine grained and homogeneous AA1050/ZnO nanocomposite with well-developed high angle grain boundaries through accumulative press bonding", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2015 Jan vol. 627, no. 1, pp.374-380, 2015.

Parvin Nader ، Reza Derakhshandeh Haghighi ، Mahdi Naeimi ، Reza Parastar Namin ، mohammad Mehdi Hadavi, "EFFECT OF NICKEL AND COBALT ADDITIONS ON INFILTRATION BEHAVIOR, MICROSTRUCTURE AND HARDNESS OF W-AG COMPOSITES", Iranian Journal of Materials Science and Engineering, 2014 Dec vol. 4, no. 11, pp.8-11, 2014.

AMIRKHANLOU SAJJAD ، KETABCHI MOSTAFA ، Parvin Nader ، G.P.C. DRUMMEN, "Structural Evaluation and Mechanical Properties of Aluminum/ Tungsten Carbide Composites Fabricated by Continual Annealing and Press Bonding (CAPB) Process", Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2014 Oct vol. ., no. 0, , 2014.

TAMIMI SAEED ، KETABCHI MOSTAFA ، Parvin Nader ، Mehdi Sanjari ، Augusto Lopes, "Accumulative Roll Bonding of Pure Copper and IF Steel", International Journal of Metals, 2014 Sep vol. 2014, no. 179723, pp.1-9, 2014.

BAHRAMI MOHSEN ، mohammad kazem besharati givi ، DEHGHANI KAMRAN ، Parvin Nader, "On the role of pin geometry in microstructure and mechanical properties of AA7075/SiC nano-composite fabricated by friction stir welding technique", Materials and Design, 2014 Feb vol. 53, no. 0, pp.519-527, 2014.

SHARIFIAN JAZI FARIBORZ ، Parvin Nader ، TAHRIRI MOHAMMADREZA ، morteza alizade ، ABEDINI DERESHGY SANAM ، lehdi alizade, "The Relationship Between the Synthesis and Morphology of SnO2-Ag2O Nanocomposite", Synthesis and Reactivity In Inorganic Metal-Organic and Nano-Metal Chemistry, 2013 Dec vol. 5, no. 44, pp.759-764, 2013.

Parvin Nader ، ali doryab, "The Application of Response Surface Methodology for the Optimization of Compaction Parameters in the Cu-Al2O3 Composite", Journal of Powder Metallurgy & Mining, 2013 Dec vol. 2, no. 2, pp.1-3, 2013.

AMIRKHANLOU SAJJAD ، KETABCHI MOSTAFA ، Parvin Nader ، shohreh khorsand ، BAHRAMI REZA, "Accumulative press bonding; a novel manufacturing process of nanostructured metal matrix composites", Materials and Design, 2013 Oct vol. 51, no. 0, pp.367-374, 2013.

SHOKATI ALI AKBAR ، Parvin Nader ، mohamad shokati, "Combustion synthesis of NiAl matrix composite powder reinforced by TiB2 and TiN particulates from Ni-Al-Ti-BN reaction system", Journal of Alloys and Compounds, 2013 Sep vol. 0, no. 0, , 2013.

ABEDINI DERESHGY SANAM ، Parvin Nader ، parviz ashtari ، SHARIFIAN JAZI FARIBORZ, "Microstructure, strength and CO2 separation characteristics of ?-alumina supported ?-alumina thin film membrane", Advances In Applied Ceramics, 2013 Jan vol. 112, no. 1, pp.17-22, 2013.

POURMAHDAVI MARYAM ، Parvin Nader, "Effects of anodic in ethylene glycol based electrolyte on the corrosion resistance and biocompatibility of Ni Ti shape memory alloy", Advanced Materials Research, 2013 Jan vol. 0, no. 829, pp.431-435, 2013.

SHARIFIAN JAZI FARIBORZ ، Parvin Nader ، RABIEI MOHAMMAD REZA ، TAHRIRI MOHAMMADREZA ، MOSHEFI SHABESTARI ZAHRA ، AZADMEHR AMIR REZA, "The effect of the synthesis route on the grain size and morphology of ZnO/Ag nanocomposite", Journal of Ceramic Processing Research, 2012 Dec vol. 13, no. 5, pp.523-526, 2012.

AMIRKHANLOU SAJJAD ، KETABCHI MOSTAFA ، Parvin Nader, "Nanocrystalline/nanoparticle ZnO synthesized by high energy ball milling process", Materials Letters, 2012 Nov vol. 86, no. 1, pp.122-124, 2012.

SHOKATI ALI AKBAR ، Parvin Nader ، SABZIANPOOR NASER ، mohamad shokati ، HAMATY ALI, "In situ synthesis of NiAl-NbB2 composite powder through combustion synthesis", Journal of Alloys and Compounds, 2012 Aug vol. 0, no. 0, , 2012.

SHAKERIAN FARIDEH ، Parvin Nader ، AZADMEHR AMIR REZA ، RABIEI MOHAMMAD REZA, "Synthesis of silver tin oxide nanocomposite powders via chemical coprecipitation method", Comptes Rendus Chimie, 2012 Jul vol. 15, no. 1, pp.633-638, 2012.

Sajjad Pourkhorshidi ، KENEVISI MOHAMMAD SALEH ، Parvin Nader ، Mohammad Naeimi ، Hamid Ebrahimnia Khaniki, "A study on the microstructure and properties of Cu-based shape memory alloy produced by hot extrusion of mechanically alloyed powders", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2012 Jul vol. 556, no. 3, pp.658-663, 2012.

parviz asadi ، m.kbesharati givi ، Parvin Nader ، ali araei ، TAHERI SHARGH MEHDI ، s.tutunchilar, "On the role of cooling and tool rotational direction on microstructure and mechanical properties of friction stir processed AZ91", International Journal of Advanced Manufacturing Technology, 2012 Mar vol. 0, no. 0, , 2012.

SHARIFIAN JAZI ALI ، Parvin Nader ، AZADMEHR AMIR REZA ، TAHRIRI MOHAMMADREZA, "Influence of annealing temperature on distribution and morphology of silver powder in SnO2-Ag2O nanocomposite", Advances In Applied Ceramics, 2012 Jan vol. 0, no. 0, pp.1-6, 2012.

ABEDINI DERESHGY SANAM ، Parvin Nader ، parviz ashtari, "Preparation, characterization and microstructural optimization of a thin ?-alumina membrane on a porous stainless steel substrate", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2012 Jan vol. 0, no. 533, pp.1-8, 2012.

Parvin Nader ، mehdi rahimiyan, "The Characteristics of Alumina Particle Reinforced Pure Al Matrix Composite", Acta Physica Polonica A, 2012 Jan vol. 121, no. 1, pp.108-110, 2012.

SHARIFIAN JAZI FARIBORZ ، Parvin Nader ، AZADMEHR AMIR REZA ، TAHRIRI MOHAMMADREZA, "Influence of annealing temperature on distribution and morphology of silver powder in Sn2-Ag2O nanocomposite", Advances In Applied Ceramics, 2012 Jan vol. 0, no. 0, pp.1-6, 2012.

Maysam Mohammadpour ، Parvin Abachi ، Parvin Nader ، Kazem Pourazrang, "Study of cemented carbonitrides with nickel as binder: Experimental investigations and computer calculations", International Journal of Refractory Metals and Hard Materials, 2011 Nov vol. 0, no. 0, , 2011.

BATENI ALI ، Parvin Nader ، AHMADI NAJAFABADI MEHDI, "Density evaluation of powder metallurgy compacts using in situ X-ray radiography", Powder Metallurgy, 2011 Sep vol. 54, no. 3, pp.1-4, 2011.

Ehsan Gharibshahian ، Abbas Honarbakhsh Raouf ، Parvin Nader ، Mehdi Rahimian, "The effect of microstructure on hardness and toughness of low carbon welded steel using inert gas welding", Materials and Design, 2011 Apr vol. 32, no. 4, pp.2042-2048, 2011.

mehdi rahimian ، Parvin Nader ، naser ehsani, "The effect of production parameters on microstructure and wear resistance of powder metallurgy Al-Al2O3 composite", Materials and Design, 2011 Feb vol. 32, no. 2, pp.1031-1038, 2011.

Mostafa Amirjan ، Parvin Nader ، Karim Zanganehmadar, "Mutual dependency of mechanical properties and contiguity in w-cu composites", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2010 Oct vol. 527, no. 26, , 2010.

mostafa amirjan ، Karim Zanganeh Madar ، Parvin Nader, "Preparation of tungsten base composite powder by electroles nickel plating", Powder Metallurgy, 2010 Sep vol. 53, no. 3, pp.218-222, 2010.

، Parvin Nader ،, "Investigation of particle size and amount of alumina on microstructure and mechanical properties of Al matrix composite made by powder metallurgy", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2010 Feb vol. 527, no. 4, , 2010.

، ، Parvin Nader, "Characterization and formation mechanism of nanocrystalline W-Al alloy prepared by mechanical alloying", Journal of Alloys and Compounds, 2010 Jan vol. , no. 489, , 2010.

Parvin Nader, "The mechanism of copper penetration into the grain boundary of Fe-Cu and Fe-Cu-C Compacts", Amirkabir International Journal of Electrical and Electronics Engineering, 2009 Dec vol. 8, no. 28, , 2009.

ATTAR HOOYAR ، Parvin Nader, "The effect of warm rolling on the wear resistance of W-20 wt% Cu composite", Amirkabir International Journal of Electrical and Electronics Engineering, 2009 Nov vol. 20, no. 71, , 2009.

، Parvin Nader ،, "The effect of sintering temperature and the amount of reinforcement on the properties of Al-Al2O3 composite", , 2009 Sep vol. , no. 30, , 2009.

TAMIMI SAEED ، KETABCHI MOSTAFA ، Parvin Nader, "Microstructural evolution and mechanical properties of accumulative roll bonded interstitial free steel", , 2009 Aug vol. , no. 30, , 2009.

، ، Marashi Pirooz ، Parvin Nader, "The effect of intercritical heat treatment temperature on the tensile properties and work hardening behavior of ferrite-martensite dual phase steel sheets", , 2009 Aug vol. , no. 518, , 2009.

، ، Parvin Nader, "Evaluation of microstructure and contiguity of W/Cu composites prepared by coated tungsten powders", , 2009 Jul vol. , no. 27, , 2009.

، ، Parvin Nader ،, "The effect of particle size, sintering temperature and sintering time on the properties of Al-Al2O3 composites, made by powder metallurgy", Journal of Materials Processing Technology, 2009 Jul vol. , no. 209, , 2009.

ASDI KOOHENGANI SAEED ، Parvin Nader, "Influence of prior cold working on the tribological behavior of Cu-0.65 wt.%Cr alloy", Journal of Alloys and Compounds, 2009 Jul vol. , no. 480, , 2009.

Parvin Nader ، ATTAR HOOYAR ، SHAHSAVARI SHAHRAM, "The Effect of Tungsten ,Molybdenum and Tantalum on The Characteristics of Cu-Pb Shaped Charge Liners", , 2009 May vol. 0, no. 0, , 2009.

100

، ، Parvin Nader, "Improvement of physical properties of Cu-infiltrated W compacts via electroless nickel plating of primary tungsten powder", , 2009 May vol. , no. 203, , 2009.

101

EGHTESADI SIAMAK ، Parvin Nader ، SALARI RAD MOHAMMAD MEHDI, "Mechanically induced driving forces in preparing W-Cu nanocomposite", Journal of Alloys and Compounds, 2009 Apr vol. , no. 473, , 2009.

102

Saeed Asadi Kouhanjani ، Zarebidaki Arman ، Morteza Abedini ، Parvin Nader, "Influence of prior cold working on the tribological behavior of Cu-0.65 wt.%Cr alloy", Journal of Alloys and Compounds, 2008 Dec vol. 2009, no. 480, pp.505-509, 2008.

103

Parvin Nader ، ASADIFARD REZA ، SAFFARZADEH PAYMAN ، SHEIBANY SHAHAB ، Marashi Pirooz, "Preparation and mechanical properties of SiC-reinforced Al6061 composite by mechanical alloying", , 2008 Sep vol. , no. 492, , 2008.

104

، Parvin Nader, "Pressure measurement and some observation in lost foam casting", Journal of Materials Processing Technology, 2008 Sep vol. , no. 206, , 2008.

105

TAMIMI SAEED ، KETABCHI MOSTAFA ، Parvin Nader, "The Effects of Accumulative Roll Bonding Process on Microstructure and Mechanical Properties of if Steel", International Journal of Modern Physics B, 2008 May vol. , no. 0, , 2008.

106

HAGHIRI ALI ، KETABCHI MOSTAFA ، Parvin Nader, "The Effect of Annealing Time on the Physical and Mechanical Properties of Interface in Cu-Ag Bimetallic Strips", , 2008 May vol. 0, no. 0, , 2008.

107

HAGHIRI ALI ، KETABCHI MOSTAFA ، Parvin Nader, "The Effect of Annealing Temperature on The Bond Strength and Structure of Interface in Ag/Cu Strips", , 2008 Mar vol. , no. , , 2008.

108

ali mahdi poor omrani ، mahdi zohor ، seyed mohamad reza khalili ، Parvin Nader, "Explosive powder metallurgy, a novel metal powder forming process", , 2006 Nov vol. 2, no. 3, pp.55-65, 2006.

Conference Papers

SABBAGHIAN MAHDIEH ، KABIR MOHAMMAD ZAMAN ، Parvin Nader ، Sadrnezhaad Sayed Khatiboleslam, "Characterization of a Novel Composition of Cu-30.3Al-9.7Mn (at%) Alloy for Structural Applications,", 14th International Congress on Civil Engineering, 21-23 October 202514th International Congress on Civil Engineering, 21-23 October 2025Sharif University of Technology, Tehran, Iran, Oct 2025.

HOSSEINI SEYED EMADODDIN ، Parvin Nader ، Mostafa Amirjan, "Design, analyse and comparison of brazing nickel-based superalloy without boron,", 8th Iran International Conference on Materials and Metallurgical Engineering - iMat2019, Oct 2019.

HASHEMI SEYED MAHDI ، Parvin Nader ، Zia Valefi, "Effect of YSZ and SiC Reinforcements on the Mechanical Properties of Cr2O3 Plasma-sprayed Nanocoatings,", The 6th International Conference on Composites: Characterization, Fabrication and Application, Dec 2018.

mohammad naeimi ، SOLTANALINEZHAD MEHDI ، sadegh qazvinian ، majid asgari ، Parvin Nader, "An overview on the production of single crystal and polycrystalline materials by Powder Bed Additive Manufacturing,", 7th international conference and exhibition of metallurgy and materials engineering, Oct 2018.

RASHIDNEJAD ALIREZA ، EBRAHIMI ALIREZA ، Parvin Nader, "Brazing of iron powder metallurgy parts with different porosity percentage,", 7th international conference and exhibition of metallurgy and materials engineering, Oct 2018.

YUSEFI ALI ، Parvin Nader, "Method of manipulation functionally graded tungesten-copper composites,", 6TH INTERNATIONAL CONFERENCE ON POWDER METALLYRGY FOR AUTOMOTIVE PARTS, Apr 2018.

RASHIDNEJAD ALIREZA ، EBRAHIMI ALIREZA ، Parvin Nader, "The effect of graphite upon brazability of ferrous powder metallurgy components using Anchorbraze 72 filler metal,", PM AUTO 2018 International Conference, Apr 2018.

SAJAD AMIRKHANLOU ، KETABCHI MOSTAFA ، Parvin Nader ، FERNANDO CARRENO, "Continuous Dynamic Recovery in Pure Aluminum Deformed to High Strain by Accumulative Press Bonding,", 3rd Pan American Materials Congress, Feb 2017.

TAVAKOLKHAH VAHID ، Maryam Faridzadeh ، ABDULLAH AMIR ، Parvin Nader ، FARTASHVAND VAHID, "Theoretical and numerical investigation of hot of compaction of Ti-6Al-4V,", ICME2016, Nov 2016.

HESHMATI NIUSHA ، Parvin Nader, "Synthesis and evaluation of bioactive glass contaning MgO, prepared by Sol-Gel method,", 5th international on materials engineering and methodology, Nov 2016.

AMIRNASIRI ALI ، Parvin Nader ، KHOSRAVANIAN RASOOL ، MERATI HAMID, "Designing & Perfect Study on Manufacturing Process of Drilling Stabilizer for Developing Technology in Iran,", International Congress on Engineering Innovation and Technology Development, May 2016.

AMIRKHANLOU SAJJAD ، mohammad ebrahim bajgholi ، KETABCHI MOSTAFA ، Parvin Nader, "Accumulative press bonding: a novel process for manufacturing Al/ZnO metal matrix nanocomposites,", فصلنامه علمی پژوهشی فرآیندهای نوین در مهندسی مواد, Jan 2016.

AMIRNASIRI ALI ، Parvin Nader ، mahmod tabrizi, "Complete interoduction of drilling stabilizer and types of this tool: attributes, traits and usages,", International conference on modern research results in sciences,engineering& technology, Jan 2016.

YUSEFI ALI ، Parvin Nader ، saeed khademzadeh ، mahmoud sadat kiai ، mohamad kazem besharati givi, "Synthesis and characterization of W-Cu Functionally graded composites by spark plasma sintering,", 4th International Engineering Materials & Metallurgy Conference, Nov 2015.

ASKARIAN MASOOMEH ، Parvin Nader, "Evaluation of micro structural and mechanical properties of Al/Al2O3 composite fabricated by APB,", 4th International Joint Conference of Iranian Metallurgical Engineering and Iranian Foundry men Society, Nov 2015.

JAVADI DOODRAN RAMONA ، Parvin Nader, "Investigating the effect of pin geometry on mechanical properties of AA6061-T6 composites fabricated by friction stir welding,", 4th international engineering material and metallurgy conference, Nov 2015.

MOUSAVI SEPEDEH ، OMIDVAR HAMID ، Parvin Nader ، Jafar Jolokhani, "Effect of surface roughness and time on wetting behavior of Sn-3.5%Ag and Sn-5%Ag on pure silver,", 4th International Engineering Materials and Metallurgy Conference, Nov 2015.

MOUSAVI SEPEDEH ، OMIDVAR HAMID ، Parvin Nader ، jaafar jelokhani, "Effect of surface roughness and time on the wetting behavior of Sn-3.5%Ag and Sn-5%Ag alloy of Ag substrate,", 4th International Engineering Materials & Metallurgy Conference, Nov 2015.

MOUSAVI SEPEDEH ، OMIDVAR HAMID ، Parvin Nader ، jaafar jelokhani, "effect of surface roughness and time on the wetting behavior of solder alloy Sn-3.5%Ag and Sn-5%Ag on pure silver substrate,", 4th International joint conference of Iranian Metallurgical Engineering & Iranian Foundry man soceity, Nov 2015.

SHAFIEI HAGHSHENAS MAHDI ، Parvin Nader ، mahmod tabrizi, "The Investigation of Microstructure and Phases Formed in the Interface of AISI4145/WC-Co Joint Zone Connected by Brazing,", 2nd National Conference on Materials Engineering, Feb 2015.

AMIRKHANLOU SAJJAD ، KETABCHI MOSTAFA ، Parvin Nader ، Fernando Carre?o, "Mechanical properties of ultra-fine grained metal matrix nanocomposite proceed by accumulative press bonding (APB) process,", 3rd International Engineering Materials and Metallurgy conference, Nov 2014.

AMIRKHANLOU SAJJAD ، KETABCHI MOSTAFA ، Parvin Nader, "Combination of stir casting and accumulative roll bonding processes: a way for fabrication of nanostructured aluminum/alumina composite,", 3rd International Engineering Materials and Metallurgy conference, Nov 2014.

Ehsan Gharibshahiyan ، abas honarbakhsh raouf ، Parvin Nader, "Experimental investigation and finite elements simulation on friction stir welding processes of API - 5L,", 8th Congress & 3rd International Engineering Materials & Metallurgy, Nov 2014.

SHAFIEI HAGHSHENAS MAHDI ، Parvin Nader ، GOUDARZI MAHDI ، mahmod tabrizi, "The investigation of hardness variations and element diffusion in the interface of AISI 4145/WC- Co joint zone connected by torch brazing,", 8th Congress & 3rd International Engineering Materials & Metallurgy, Nov 2014.

KHADEMZADEH SAEED ، Parvin Nader ، federico mazzucato ، paolo.f bariani, "Geometrical characterization of thin walls produced by micro laser sintering,", International Conference onAdditive Technologies, Oct 2014.

AMIRKHANLOU SAJJAD ، KETABCHI MOSTAFA ، Parvin Nader ، shohreh khorsand ، Fernando Carre?o, "Effect of processing cycles on aluminum/tungsten carbide composites prepared by continual annealing and press bonding process,", 6th International Conference on Nanomaterials by Severe Plastic Deformation, Jun 2014.

AMIRKHANLOU SAJJAD ، KETABCHI MOSTAFA ، Parvin Nader ، shohreh khorsand ، fernando carreno, "Manufacturing of nanostructured Al/WCp metal- matrix composites by accumulative press bonding,", 6th International Conference on Nanomaterials by Severe Plastic Deformation, Jun 2014.

AMIRKHANLOU SAJJAD ، KETABCHI MOSTAFA ، Parvin Nader, "Successful production of Al/ZnO nanocomposite by accumulative press bonding process,", 6th International Conference on Nanomaterials by Severe Plastic Deformation, Jun 2014.

EBADI ASAR MANOOCHEHR ، Parvin Nader ، MIRSALEHI SEYED EHSAN, "Investigation on effect of filler metal type on copper foil to brass sheet brazing joint,", 14th National Conference on Welding & Inspection (14th NCWI) & 3rd National Conference on NDT (3rd NCNDT), Feb 2014.

ZADEH SOLEIMANI EBRAHIM ، Parvin Nader ، RAZZAGHI KASHANI MARJAN, "Investigation of magnetic properties of synthesized Sr hexaferrite nanopowders prepared by sol gel auto combustion and coprecipitation methods,", The 8th international chemical engineering congress & exhibition (ICHEC2014), Feb 2014.

ehsan gharibshahian ، abas honarbakhsh raouf ، Parvin Nader, "Effect of welding speed on microstructure and mechanical propertes API-5L steel,", 5th iranian pipe& pipeline conference, Dec 2013.

SHOKATI ALI AKBAR ، Parvin Nader ، Mohammad Shokati, "Fabrication and characterization of NiAl matrix composite reinforced by nanosized particulates from Ni-Al-Ti-BN reaction system,", 4th International Biennial Conference on Ultra Grained and Nanostructured Materials, Nov 2013.

SHOKATI ALI AKBAR ، Parvin Nader ، Mohammad Shokati, "Combustion synthesis of a novel NiAl matrix nanocomposite from Ni-Al-Ti-B4C reaction system,", 4th International Biennial Conference on Ultra Grained and Nanostructured Materials, Nov 2013.

ehsan gharibshahian ، abas honar bakhsh raouf ، Parvin Nader, "Evaluation of mechanical properties and stell microstructure of welded oil piplines by turbulent friction,", The second international and seventh joint conference of iranian metallurgical engineering and iranian foundrymen scientific societies, Oct 2013.

MOHAMADI HAJIBEKANDEH FATEMEH ، Parvin Nader ، AZADMEHR AMIR REZA, "PREPARATION AND CHARACTERIZATION OF UNIFORM TIO2 MEMBRANE ON POROUS 316L STAINLESS STEEL SUBSTRATE,", Porous and Powder Materials Symposium and Exhibition PPM 2013, Sep 2013.

NAEIMI MOHAMMAD ، HASHEMI SEYED MAHDI ، Parvin Nader ، mohammad hadi elahinia, "Investigating the surface modification of porous nitinol implants,", The First International and the Sixth Joint Conference of Iranian Metallurgical Engineering Society and Iranian Founderymens Society, Nov 2012.

Parvin Nader ، HASHEMI ZAHRA ، PEIGHAMBAR ZADEH SEYYED MOHMMAD HOSSE ، NAEIMI MOHAMMAD, "Fractography of Steam Treated Sintered Steel Compacts,", 2nd International Conferenceon Recent Trends in Structural Materials, Nov 2012.

Parvin Nader ، HASHEMI ZAHRA ، PEIGHAMBAR ZADEH SEYYED MOHMMAD HOSSE ، NAEIMI MOHAMMAD, "Investigating the Effect of Type and Thickness of the Oxide Layer Produced by Steam Treatment on Wear Behavior of Sintered Steel Compacts,", 2nd International Conferenceon Recent Trends in Structural Materials, Nov 2012.

Parvin Nader ، DERAKHSHANDEH HAGHIGHI REZA ، NAEIMI MOHAMMAD ، PARASTARNAMINI REZA ، mohammad mahdi hadavi, "Effect of Nickel and Cobalt addition on infiltration behavior , microstructure and hardness of W-Ag composites,", The First International and the Sixth Joint Conference of Iranian Metallurgical Engineering Society and Iranian Founderymens Society, Nov 2012.

SHARIFIAN JAZI FARIBORZ ، Parvin Nader ، ABEDINI DERESHGY SANAM ، mehrnoush arefian, "Synthesis of SnO2-Ag2O Nanocomposite and Investigation of Morphology and Distribution of the Constituents,", International Congress on Nanoscience & Nanotechnology - ICNN2012, Sep 2012.

SHOKATI ALI AKBAR ، Parvin Nader ، ئخاشئئشی ساخنشفه, "Fabrication of NiAl Matrix Nanocomposite from the Ni-Al-Ti-BN System via Combustion Synthesis,", (International Congress on Nanoscience & Nanotechnology (ICNN2012, Sep 2012.

POURMAHDAVI MARYAM ، Parvin Nader ، NAEIMI MOHAMMAD, "Overview of microstructural and corrosion behavior of anodize NiTi shape memory alloys,", International congress on nanoscience and nanotechnology, Sep 2012.

POURKHORSHIDI SAJJAD ، NAEIMI MOHAMMAD ، Parvin Nader ، ZAMANI SEYED MOHAMMAD MAHDI ، hamid ebrahiminia, "Manufacturing and Evaluating of Cu-based Shape Memory Alloys by Hot Extrusion of PM Samples Made by Mechanical Alloying,", 21st International Conference on Metallurgy and Materials, May 2012.

OMIDVAR HAMID ، SAJJADNEJAD MOHAMMAD ، davar rezakhani ، Parvin Nader ، HOSSEINI SEYEDALI, "Investigation of welded zone in carbon steels with different electrodes in sea water environment,", 13th national congress of corrosion, May 2012.

Parvin Nader ، DERAKHSHANDEH HAGHIGHI REZA ، NAEIMI MOHAMMAD, "Effect of Nickel and Cobalt Addition on Infiltration Behavior and Electrical Resistivity of W-Ag Composite,", ASIAN INTERNATIONAL CONFERENCE ON MATERIALS, MINERALS, AND POLYMER(MAMIP 2012), Mar 2012.

ABDULLAH AMIR ، TAVAKOLKHAH VAHID ، ABEDINI REZVAN ، Parvin Nader, "Analytical Model for Hot Ti-6Al-4V Powder Compaction and comparison with Experimental Results,", 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Dec 2011.

SHOKATI ALI AKBAR ، Parvin Nader ، mohammad shoukati ، SABZIANPOOR NASER ، HAMATY ALI, "SYNTHESIS OF ULTRAFINE COMPOSITE FROM ELEMENTAL POWDERS OF Ni-Al-Nb-B VIA COMBUSTION SYNTHESIS,", 3rd International Conference on UltraFine Grained and Nano-Structured Materials, Nov 2011.

SHOKATI ALI AKBAR ، Parvin Nader ، GHAZANFARI HADI ، MOHAMMAD SHOUKATI, "FABRICATION OF Ni Al MATRIX HYBRID ULTRAFINE COMPOSITE FROM THE Ni- Al-Ti-B4C SYSTEM VIA COMBUSTION SYNTHESIS,", 3rd International Conference on UltraFine Grained and Nano-Structured Materials, Nov 2011.

SHOKATI ALI AKBAR ، Parvin Nader ، HAMATY ALI ، naser sabzyan pour ، mohammad shoukati, "Investigation of the products in the combustion synthesis of Ni-Al-Nb-B,", The Fifth Joint Congress of Iranian Metallurgical Engineering and Iranian Pounding Societies, Oct 2011.

DORYAB ALI ، Parvin Nader ، davoud haghshenas, "THE IMPLENTATION OF RESPONSE SURFACE METHODOLOGY FOR THE OPTIMIZATION OF MILLING PARAMETERS IN THE SYNTHESIS OF CU-AL2O3 POWDER,", 6th International Powder Metallurgy Conference and Exhibition, Oct 2011.

SHARIFIAN JAZI ALI ، Parvin Nader ، AZADMEHR AMIR REZA, "Synthesis and characterization of AgSnO2 by sol-gel method for gas sensors,", 15th Iranian Chemistry Congress Bu-Ali Sina university -, Sep 2011.

Parvin Nader ، NASER EHSANI, "FABRICATION OF AL-AL2O3 COMPOSITES by POWDER METALLURGY METHOD and THEIR CHARACTERISTIC,", ADVANCES IN APPLIED PHYSICS & MATERIALS SCIENCE CONGRESS, May 2011.

RABIEI MOHAMMAD REZA ، Parvin Nader ، AZADMEHR AMIR REZA ، SHAKERIAN FARIDEH, "Synthesis of Ag/ZnO nanocomposite via coprecipitaion method,", ( The 2nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-2, Dec 2010.

ABEDINI DERESHGY SANAM ، Parvin Nader ، parviz Ashtari, "Investigation of Composite Membranes by Developing Mesoporous Alumina Layer on Stainless Steel Substrate,", (The 2nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-2, Dec 2010.

TAHERI SHARGH MEHDI ، Parvin Nader ، OMIDVAR HAMID ، parviz Asadi ، Mohsen Barmous, "A New Friction Stir Processing Method for Fabricating AZ91/SiC Nano-composite,", (The 2nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-2, Dec 2010.

HOSSEINI SEYEDALI ، Parvin Nader ، OMIDVAR HAMID, "Corrosion behavior of plain carbon steel welded with rutile, cellulose and basic electrodes,", The 4th common congress of Iranian Metallurgical Engineering and Foundry Society of Iran, Nov 2010.

Parvin Nader ، vahid javaheri ، mohammad khan beiki, "Comparison of Copper Powder Corrosion Inhibitors,", 4th Common Conference of Metallurgical Engineering Society and Iranian Foundry Society, Nov 2010.

TAHERI SHARGH MEHDI ، Parvin Nader ، OMIDVAR HAMID, "Effect of pin length and rotational speed of electrode on micro-structure of AZ91/SiC made by friction stir processing,", 11th Conference on Manufacturing Engineering, Oct 2010.

ABEDINI DERESHGY SANAM ، Parvin Nader ، Parviz Ashtari, "Production of the membranes used in water and sewerage purification,", The 4th Conference and Exhibition on Environmental Engineering, Oct 2010.

TAHERI SHARGH MEHDI ، Parvin Nader, "Effect of processing parameters on thermo-mechanically affected zone of friction stir processed AZ91 magnesium alloy,", ASME 2010 10th biennial conference on engineering systems design and analysis, Jul 2010.

SHAKERIAN FARIDEH ، Parvin Nader ، AZADMEHR AMIR REZA ، RABIEI MOHAMMAD REZA, "Synthesis of silver tin oxide nano composite powders by co precipitation method,", The 3rd Conference on NanostructuresKish Island, I. R. Iran -NS2010, Mar 2010.

Parvin Nader ، PIGHANBARZADEH SEYED MOHAMMAD HOSSEIN ، MOHAMMAD ALINEZHAD DALALI MOJTABA, "The effect of phosphorus and processing parameters on wear behavior of steam treated sintered Iron compacts,", PM auto 08, 5th International congress on powder metallurgy for automotive parts, Apr 2009.

Mojtaba Naserian ، Parvin Nader ، PIGHANBARZADEH SEYED MOHAMMAD HOSSEIN ، MOHAMMAD ALINEZHAD DALALI MOJTABA ، Firooz Irani, "Wear properties of steam treated porous Iron-phosphrous compacts,", Proceedings on the honor of Prof. P.Davami - Academy of Science of Islamic Republic of Iran, Dec 2008.

BATENI ALI ، MOHAMMADI AGHDAM MOHAMMAD ، Parvin Nader, "Prediction of Density in Porous Materials by X-ray Techniques,", Oct 2008.

BATENI ALI ، AHMADI NAJAFABADI MEHDI ، Parvin Nader, "Prediction of density in porous materials by x-ray techniques,", 17th World Conference on Nondestructive Testing, Oct 2008.

Mostafa Amirjan ، Karim Zanganehmadar ، Parvin Nader, "The effect of electroless Nickel plating of Tungsten particles on infiltration process and density of W-Cu composite,", PM Auto 08, 5th International congress on powder metallurgy for automotive parts, Apr 2008.

BATENI ALI ، AHMADI NAJAFABADI MEHDI ، Parvin Nader, "Determination of green density of PM compacts by in situ X-RAY radiography,", 5th International congress on powder metallurgy for automotive parts - PM AUTO 08, Apr 2008.

Mehdi Rahimian ، Naser Ehsani ، Parvin Nader ، Hamid Reza Baharvandi, "The effect of particle size of Alumina on properties of Al-Al2O3 composite, made by powder metallurgy,", PM Auto 08, 5th International congress on powder metallurgy for automotive parts, Apr 2008.

TAMIMI SAEED ، KETABCHI MOSTAFA ، Parvin Nader, "Mechanical properties of ultra fine grained aluminum and iron produced by accumulative roll bonding method,", Annual Conference and Exhibition of American Society of Materials, Metals and Minerals, Mar 2008.

TAMIMI SAEED ، KETABCHI MOSTAFA ، Parvin Nader, "Investigation of micro structure and mechanical properties of IF steel - Al 1100 and Copper after accumulative roll bonding,", Third Students National Congress on Nano Technology, Feb 2008.

TAMIMI SAEED ، KETABCHI MOSTAFA ، Parvin Nader, "Ultrafine Grained Aluminum and Iron Produced by Accumulative Roll Bonding Method,", Dec 2007.

Parvin Nader, "Role of electroless plating on the production of W-Cu EDM electrodes,", Tehran international congress on manufacturing engineering, Dec 2007.

Parvin Nader, "The effect of AL2O3 particle content on properties of AL matrix composite,", 2nd International congress (8th national conference) of Iranian Manufacturing Society, Dec 2007.

TAMIMI SAEED ، KETABCHI MOSTAFA ، Parvin Nader, "The effects of acdumulative roll bonding process on microstructure and mechanical properties of IF steel,", Nov 2007.

TAMIMI SAEED ، KETABCHI MOSTAFA ، Parvin Nader, "Micro-structural studies of ultra fine grained IF steel produced by Accumulative Roll Bonding,", 2nd International congress (8th national conference) of Iranian Manufacturing Society, Nov 2007.

TAMIMI SAEED ، KETABCHI MOSTAFA ، Parvin Nader, "Development of UFG structure in Al 1100 and IF Steel by Accumulative Roll Bonding process,", 2nd International congress of Iranian Manufacturing Engineering Society, Nov 2007.

FALAHATI NEZHAD MOJTABA ، Parvin Nader ، DEHGHANI KAMRAN, "The effect of Nb on mechanical properties of high alloy TRIP steel,", Steel Symposium 85, Feb 2007.

، Parvin Nader ، DEHGHANI KAMRAN, "The effect of Niobium on strength and ductility of high alloy TRIP steel,", Tenth National Congress of Metallurgical Eng. Society, Feb 2007.

ATTAR HOOYAR ، Parvin Nader ، HADAVI MOHAMMAD ALI ، EGHTESADI SIAMAK ، DERAKHSHANDEH HAGHIGHI REZA, "The effect of warm rolling on the properties of W-Cu powder metallurgy compacts,", Tenth National Congress of Metallurgical Eng. Society, Dec 2006.

EGHTESADI SIAMAK ، Parvin Nader ، ATTAR HOOYAR ، DERAKHSHANDEH HAGHIGHI REZA, "The effect of PCA on particle size in W-20Cu nano-composite produced by mechanical alloying,", Tenth National Congress of Metallurgical Eng. Society, Dec 2006.

، ، Parvin Nader ،, "Numerical simulation and experimental study of explosive compaction of tungsten powder,", Nov 2006.

REZAEE MASIH ، Parvin Nader, "The effect of raw material on microstructure and mechanical properties of Tungsten based heavy metals,", Tenth National Congress of Metallurgical Eng. Society, Nov 2006.

DERAKHSHANDEH HAGHIGHI REZA ، Parvin Nader ، ATTAR HOOYAR ، EGHTESADI SIAMAK, "The effect of Cobalt and Nickel distribution on infiltration of porous Tungsten with silver,", Eleventh National Congress of Metallurgical Eng. Society, Nov 2006.

HAGHIRI ALI ، KETABCHI MOSTAFA ، Parvin Nader, "The effect of interface composition, on hardness and electrical resistance of rolled Cu-Al strips,", Third metal forming conference, May 2006.

HAGHIRI ALI ، KETABCHI MOSTAFA ، Parvin Nader, "The effect of diffusion annealing on microstructure and bond strength in Cu-Ag bimetallic strips,", Third metal forming conference, May 2006.

، ، Parvin Nader ،, "Underwater explosive forming of Tungsten powder metallurgy compacts,", 14th national congress of mechanical engineers society, May 2006.

، ، ، Parvin Nader, "A novel explosive powder metallurgy process for the fabrication of Tungsten powder metallurgy compacts,", The first international conference of Iranian manufacturing engineers society, Dec 2005.

MEHRABI SAHAR ، Parvin Nader ، KETABCHI MOSTAFA ، MAPAR ABOOZAR, "Rolling ability of Ag-20Ni sintered alloy compacts,", Ninth Iranian metallurgical engineers society, Nov 2005.

Parvin Nader ، DEHGHANI KAMRAN ، FALAHATI NEZHAD MOJTABA, "Martensitic transformation of plastically deformed TRIP steel,", Ninth Iranian metallurgical engineers congress, Nov 2005.

HAGHIRI ALI ، KETABCHI MOSTAFA ، Parvin Nader ، ZARE MORTAZA, "The effect of diffusion annealing temperature on the microstructure and microhardness of interface in copper - silver bimetalllic strips,", Mar 2005.

Parvin Nader, "The effect of mechanical allaying on the distribution of Sic particles in Al-Sic composites,", The fifth international congress on Powder Metallurgy in automotive industry, Mar 2005.

ASADIFARD REZA ، Parvin Nader ، AGHAZADEH MOHANDESI JAMSHID ، SAFFARZADEH PAYMAN, "The effect of mechanical alloying on morphology and size of composite powders,", The Eighth Congress of Iranian Metallurgical Engineers Society, Oct 2004.

Parvin Nader ، AHMADY MEHDI, "Manipulation and Investigation of the Properties of G23-Cu73 Copper - Graphite Electrical Brushes,", The Fifth Congress of Iranian Manufacturing Engineering Society, Jan 2003.

ZANGENEHZAD REZA ، Parvin Nader ، Zahra Moshefi Shabestari ، s.Mahdi Hadavi, "Chemical Etching and Stablization of of Electrolytic and Atomised Copper Powder,", Fifth Congress of Iranian Metallurgical Engineers Society, Mar 2001.

Parvin Nader ، ، MOSLEM KAYVAN, "Mechanical properties of powder forged connectting rod,", The Third Conference of Iranian Manufacturing Engineering Society, Dec 1996.

Parvin Nader ، FAGHEDI MOHAMMADREZA ، AGHAZADEH MOHANDESI JAMSHID, "The effect of grain size and precipitation hardening on stretch ability of 1100 and 2024 Aluminium alloys,", The Third Conference of Iranian Manufacturing Engineering Society, Mar 1996.

Taught Courses

Course title

Description

Headlines

Date

Technical Language

4041

Advanced Powder Metallurgy

4032

Technical Language

4031

Advanced Powder Metallurgy

4022

Inventions/Patents

Invention title

Reg. number

Country

contributers

Reg. date

Exp. date

Nano crystalline Aurivillius Layered Perovskite for Optical Thermal Sensing Applications at High Temperatures and Acidic Environment

98088

2038/01/19

Fabrication of silver cadmium contact materials by casting method

55953

Production of a light composite brick using mineral pumice

67759

Self propagating high temperature synthesis of Ni-Al-NbB2 composite

72261

2011/10/1

Direct density measurement of of porous powder metallurgy compacts by radio-graphic method

59020

Synthesis of a tungsten based composite powder by electroless plating

62039

Design of an autoclave for the synthesis of nano-powders through hydrothermal and salvo-thermal methods

60244

Production of a light composite brick using rice husk

67757

Directional oxidation of contact materials by shielding

55955

Synthesis of Ag-SnO2 nano composite suitable for gas sensing applications

71646

2031/12/1

Synthesis of a novel three layer composite membranes , comprising a porous gamma alumina layer, middle layer and a porous stainless steel substrate

73631

2031/12/1

METALLIC-CERAMIC COMPOSITE MEMBRANES AND METHODS FOR THEIR PRODUCTION

US 2012/0118815

2038/01/19

FUNCTIONALLY GRADED W-CU COMPOSITE

US 20170368607A

2037/12/1

Development of a polymer based binder for metal injection molding of metal and ceramic powders

69760