1
Vahid Maleki, Sajad Shakerin, Seyed Alireza Ziaie, Hamid Omidvar, Seyed Ehsan Mirsalehi, "The Effect of Bonding Temperature on the Microstructural
and Mechanical Properties of Transient Liquid Phase
Bonded Commercially Pure Ti Joint", JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, February 2024
Vol. 1,
Num. 1,
Page 1-7,
February 2024,
2
Mohammad Amin Bakhtiarian, Hamid Omidvar, Amirhossein Mashhuriazar, Zainuddin Sajuri, C. Hakan Gur, "The effects of SLM process parameters on the relative density and hardness of austenitic stainless steel 316L", Journal of Materials Research and Technology, January 2024
Vol. 29,
Num. 1,
Page 1616-1629,
January 2024,
3
Mahmood Jalali Bidakhavidi, Hamid Omidvar, Ali Zamanian, "Effect of Graded Coating on the Nanoindentation Properties of HA/Ti Composite Coatings Synthesized by Mechanical Coating Technique on Ti-6Al-4V Substrate", Advanced Materials and Technologies (JAMT), December 2023
Vol. 4,
Num. 12,
Page 38-47,
December 2023,
4
Shabnam Saadi Motaallagh, Mehran Javanbakht, Hamid Omidvar, Sajad Habibzadeh, Biao Gao, "Nanostructure Design of MnO2/Partially Oxidized Graphene Nanocomposite Cathode via One-Step Pulse Potential Strategy: Toward Ultralong-Life Zinc-Ion Batteries", ACS Applied Energy Materials, November 2023
Vol. 1,
Num. 11,
Page 2941-2953,
November 2023,
5
Matin Vafaei, Amirhossein Mashhuriazar, Hamid Omidvar, Zeinuddin Sajuri, "In-service welding of X70 steel gas pipeline: Numerical and experimental investigations", Journal of Materials Research and Technology, September 2023
Vol. 26,
Num. 26,
Page 6907-6918,
September 2023,
6
Shabnam Saadi Motaallagh, Mehran Javanbakht, Hamid Omidvar, Sajad Habibzadeh, "A Novel Ni-doped ZnMn2O4/Mn2O3 nanocomposite synthesized by pulsed potential as superior zinc ion battery cathode material", JOURNAL OF ALLOYS AND COMPOUNDS, June 2023
Vol. 963,
Num. 1,
Page 171119-171129,
June 2023,
7
Amirhossein Mashhuriazar, Mohammad Hassan Badiheh Aghdam, C. Hakan Gur, Murat Tolga Ertürk, Caner Batigün, Suha Tirkes, Zainuddin Sajuri , Hamid Omidvar, "Investigating the Effects of Repair Welding on Microstructure, Mechanical Properties, and Corrosion Behavior of IN-939 Superalloy", JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, November 2022
Vol. 14,
Num. 1,
Page 1-13,
November 2022,
8
Amirhossein Mashhuriazar, Ali Ebrahimzadeh Pilehrood, Hossein Moghanni Alghalandis, Amir Hossein Baghdadi, Hamid Omidvar, "Finite Element Analysis and Optimization of Equal-Channel Angular Rolling Process by Using Taguchi Methodology", JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, June 2022
Vol. 32,
Num. 1,
Page 176-184,
June 2022,
9
Shabnam Saadi Motaallagh, Mehran Javanbakht, Hamid Omidvar, Sajad Habibzadeh, "Pulsed electro-synthesized tunable crystallite sizes ZnMn2O4/Mn2O3 nanocomposite as high-performance cathode material for aqueous zinc-ion batteries", JOURNAL OF ALLOYS AND COMPOUNDS, April 2022
Vol. 914,
Num. 1,
Page 165249-165259,
April 2022,
10
Ali Ebrahimzadeh Pilehrood, Amirhossein Mashhuriazar, Amir Hossein Baghdadi, Zainuddin Sajuri , Hamid Omidvar, "Effect of Laser Metal Deposition Parameters on the Characteristics of Stellite 6 Deposited Layers on Precipitation-Hardened Stainless Steel", Materials, September 2021
Vol. 14,
Num. 19,
Page 1-14,
September 2021,
11
Amirhossein Mashhuriazar, C. Hakan Gur, Zainuddin Sajuri , Hamid Omidvar, "Effects of Heat Input on Metallurgical Behavior in HAZ of Multi-Pass and Multi-Layer Welded IN-939 Superalloy", Journal of Materials Research and Technology, September 2021
Vol. 15C (2021),
Num. 0,
Page 1590-1603,
September 2021,
12
Nazanin Jafaripour, Hamid Omidvar, Saeed Saber Samandari, Mohammadi, Foroushani, Moghadas, Soleimani, Noshadi,, "Synthesize and characterization of a novel cadmium selenide nanoparticle with iron precursor applicable in hyperthermia of cancer cells", International Journal of Nanoscience and Nanotechnology, April 2021
Vol. 17,
Num. 2,
Page 77-90,
April 2021,
13
Amirhossein Mashhuriazar, Hamid Omidvar, C. Hakan Gur, Zainuddin Sajuri, "Effect of Welding Parameters on the Liquation Cracking Behavior of High-Chromium Ni-Based Superalloy", JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, November 2020
Vol. 29,
Num. 12,
Page 7843-7852,
November 2020,
14
Amirhossein Mashhuriazar, Hamid Omidvar, Zainuddin Sajuri, C. Hakan Gur, Amir Hossein Baghdadi, "Effects of pre-weld heat treatment and heat input on metallurgical and mechanical behaviour in HAZ of multi-pass welded IN-939 superalloy", Metals, October 2020
Vol. 10,
Num. 11,
Page 1453-1470,
October 2020,
15
Saeid Abbaszadeh, , Hamid Omidvar, Ali Shafiei, "Investigation of the High-Temperature Oxidation Behavior of the
Al0.5CoCrFeNi High Entropy Alloy", SURFACES AND INTERFACES, October 2020
Vol. 21,
Num. 1,
Page 100724-100724,
October 2020,
16
Javad Asadi, Seyed Abdolkarim Sajjadi, Hamid Omidvar, "Creep properties of Ni-based superalloy GTD-111 joints produced by transient liquid phase method using BNi-3 filler", Journal of Manufacturing Processess, September 2020
Vol. 58,
Num. 0,
Page 1103-1114,
September 2020,
17
Alireza Doroudi, Ali Ebrahimzadeh Pilehrood, Mohammadjavad Mohebinia, Ali Dastgheib, Armin Rajabi, Hamid Omidvar, "Effect of the isothermal solidification completion on the mechanical properties of Inconel 625 transient liquid phase bond by changing bonding temperature", Journal of Materials Research and Technology, July 2020
Vol. 9,
Num. 5,
Page 10355-10365,
July 2020,
18
Vahid Tavakoli, Hamid Omidvar, Ali Sharifian Jazi,, "Hot corrosion behavior of aluminized and Si-modified aluminized coated IN-
738LC produced by a novel hot-dip process", SURFACES AND INTERFACES, July 2020
Vol. 21,
Num. 1,
Page 100599-100599,
July 2020,
19
Ali Ebrahimzadeh Pilehrood, Hamid Omidvar, Ali Shamsipoor, Zainuddin Sajuri, "Influence of transient liquid phase bonding followed by homogenization on the fatigue lifetimes of inconel 738 at elevated temperature", Journal of Manufacturing Processess, July 2020
Vol. 55,
Num. 0,
Page 348-358,
July 2020,
20
Ali Ebrahimzadeh Pilehrood, Hamid Omidvar, Ali Shamsipoor, Meysam Khakian-Ghomi, "Effect of transient liquid phase bonding followed by homogenization on the microstructure and hot tensile behavior of Inconel 738 superalloy", Journal of Manufacturing Processess, October 2019
Vol. 48,
Num. 48,
Page 110-118,
October 2019,
21
Majid Karami Keshmarzi, Ahmad Ahmadi Daryakenari, Hamid Omidvar, Mehran Javanbakht, Zahed Ahmadi, Jean-Jacques Delaunay, Ramin Badrnezhad, "Pulsed electrophoretic deposition of nanographitic flake-nanostructured Co3O4 layers for efficient lithium-ion-battery anode", JOURNAL OF ALLOYS AND COMPOUNDS, October 2019
Vol. 805,
Num. 0,
Page 924-933,
October 2019,
22
Behruz Bagheri Vanani, Mahmoud Abbasi, Amin Abdollahzadeh, Hamid Omidvar, "Advanced Approach to Modify Friction Stir Spot Welding Process", METALS AND MATERIALS INTERNATIONAL, August 2019
Vol. 26,
Num. 10,
Page 1562-1573,
August 2019,
23
Mojtaba Zar, S.Hadi Tabaian, Hamid Omidvar, Ali Saberi Mehr, Ghader Hosseinzadeh, "Kinetic Study of Ethanol and Methanol Electro-oxidation on Pd-vulcan XC-72R/Cu Electrocatalyst in Alkaline Media", Journal of Nanostructures, July 2019
Vol. 9,
Num. 3,
Page 539-546,
July 2019,
24
A.H. Pakseresht, Mohsen Saremi, Hamid Omidvar, Masoud Alizadeh, "Micro-structural study and wear resistance of thermal barrier coating reinforced by alumina whisker", SURFACE & COATINGS TECHNOLOGY, March 2019
Vol. 366,
Num. 0,
Page 338-348,
March 2019,
25
Mohadeseh Rastgooy Deylami, Mehran Javanbakht, Hamid Omidvar, "Structural and electrochemical investigation of new integrated layered-layered-spinel composite, Li 1.1 Mn 0.97 Ni 0.265 Cr 0.1 Co 0.065 O 3, as cathode material for high performance lithium ion battery", IONICS, March 2019
Vol. 0,
Num. 0,
Page 1-17,
March 2019,
26
Alireza Doroudi, Ali Shamsipoor, Hamid Omidvar, Masoud Vatanara, "Effect of transient liquid phase bonding time on the microstructure isothermal solidifcation completion and the mechanical properties during bonding of Inconel 625 superalloy using Cr-Si-B-Ni filler metal", Journal of Manufacturing Processess, January 2019
Vol. 38,
Num. 1,
Page 235-243,
January 2019,
27
Mohadeseh Rastgooy Deylami, Mehran Javanbakht, Hamid Omidvar, "Enhanced performance of layered Li1.2Mn0.54Ni0.13Co0.13O2 cathode material in Li-ion batteries using nanoscale surface coating with fluorine-doped anatase TiO2", SOLID STATE IONICS, January 2019
Vol. 331,
Num. 0,
Page 74-80,
January 2019,
28
Seyed Ali Moochani, Hamid Omidvar, S.Reza Ghaffarian Anbaran, Seyed Mohammad Goushegir, "Friction stir welding of thermoplastics with a new heat-assisted tool design: mechanical properties and microstructure", Welding in the World, January 2019
Vol. 63,
Num. 1,
Page 181-190,
January 2019,
29
Mohadeseh Rastgooy Deylami, Mehran Javanbakht, Hamid Omidvar, "High Performance Nano Sponge Li1. 2Mn0. 54Ni0. 13Co0. 13O2 Cathode via Synthesizing Nano Plate Precursor for Lithium Ion Battery", Analytical and Bioanalytical Electrochemistry, January 2019
Vol. 11,
Num. 1,
Page 59-69,
January 2019,
30
Elham Ahounbar, S.Mohammad Musavi Khoei, Hamid Omidvar, "Characteristics of in-situ synthesized Hydroxyapatite on TiO2 ceramic via plasma electrolytic oxidation", CERAMICS INTERNATIONAL, October 2018
Vol. 45,
Num. 3,
Page 3118-3125,
October 2018,
31
Reyhaneh Sahraeian, Hamid Omidvar, S. M. Mehdi Hadavi, Sajad Shakerin, Vahid Maleki, "An Investigation on High-Temperature Oxidation and Hot Corrosion Resistance Behavior of Coated TLP (Transient Liquid Phase)-Bonded IN738-LC", TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, October 2018
Vol. 71,
Num. 12,
Page 2903-2918,
October 2018,
32
Amin Abdollahzadeh, Ali Shokuhfar, Jose Maria Cabrera, A.P. Zhilyaev, Hamid Omidvar, "In-situ nanocomposite in friction stir welding of 6061-T6 aluminum alloy to
AZ31 magnesium alloy", JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, August 2018
Vol. 263,
Num. 0,
Page 296-307,
August 2018,
33
Amin Abdollahzadeh, Ali Shokuhfar, Jose Maria Cabrera, Alexander Zhilyaev, Hamid Omidvar, "The effect of changing chemical composition on dissimilar Mg/Al friction
stir welded butt joints using zinc interlayer", Journal of Manufacturing Processess, May 2018
Vol. 34,
Num. 0,
Page 18-30,
May 2018,
34
Vahid Maleki, Hamid Omidvar, Mohammad-Reza Rahimipour, "Influences of gap size and cyclic-thermal-shock treatment on
mechanical properties of TLP bonded IN-738LC superalloy", TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, April 2018
Vol. 28,
Num. 5,
Page 920-930,
April 2018,
35
Arzhang Hamdollahzadeh Kivi, Hamid Omidvar, Ali Amirnasiri, "MICROSTRUCTURE AND MECHANICAL CHARACTERIZATION OF X70 STEEL WELDED JOINTS THROUGH HARDNESS MAPPING AND TENSILE STRENGTH TESTING", ARCHIVES OF METALLURGY AND MATERIALS, December 2017
Vol. 62,
Num. 4,
Page 2021-2027,
December 2017,
36
Mahyar Hasanabadi, Ali Shamsipoor, Hassan Najafi Sani, Hamid Omidvar, Sima Sakhaei, "Interfacial microstructure and mechanical properties of tungsten carbide brazed joints using Ag-Cu-Zn+ Ni/Mn filler alloy", TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, December 2017
Vol. 27,
Num. 12,
Page 2638-2646,
December 2017,
37
Mohammad Sajjadnejad, Nader Setoudeh, Ali Mozafari, Ali Isazadeh, Hamid Omidvar, "Alkaline Electrodeposition of Ni–ZnO Nanocomposite Coatings: Effects of Pulse Electroplating Parameters", TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, August 2017
Vol. 70,
Num. 6,
Page 1533-1541,
August 2017,
38
Mahyar Hasanabadi, Hamid Omidvar, Ali Shamsipoor, "Effect of BAg1 Ni-Electroplating on microstructure and properties of WC-Co-brazed joints", MATERIALS SCIENCE AND TECHNOLOGY, July 2017
Vol. 33,
Num. 17,
Page 2110-2119,
July 2017,
39
Sajad Shakerin, Vahid Maleki, Seyed Alireza Ziaie, Hamid Omidvar, Mohammad Reza Rahimipour, Seyed Ehsan Mirsalehi, "Microstructural and mechanical assessment of transient liquid phase bonded commercially pure titanium", CANADIAN METALLURGICAL QUARTERLY, July 2017
Vol. 56,
Num. 3,
Page 360-367,
July 2017,
40
Mohammad Sajjadnejad, Hamid Omidvar, Mehran Javanbakht, "influence of pulse operational parameters on electrodeposition, morphology and micro structure of Ni/nano-diamond composite coatings", INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, April 2017
Vol. 12,
Num. 0,
Page 3635-3651,
April 2017,
41
Mohammad Sajjadnejad, Hamid Omidvar, Mehran Javanbakht, Ali Asghar Mozafari,, "Textural and structural evolution of pulse electrodeposited Ni/diamond nanocomposite coatings", JOURNAL OF ALLOYS AND COMPOUNDS, December 2016
Vol. 704,
Num. 0,
Page 809-817,
December 2016,
42
Mohammad Sajjadnejad, Hamid Omidvar, Mehran Javanbakht, "Influence of pulse operational parameters on pure nickel electrodeposits: Part II. Microhardness and corrosion resistance", SURFACE ENGINEERING, July 2016
Vol. 33,
Num. 2,
Page 94-101,
July 2016,
43
Hassan Yosefpour Naghibi, Hamid Omidvar, Mohsen Farahmand Nikoo, "Investigating the effects of traveling speeds and post-weld heat treatment on mechanical properties of nano-Al2O3-fortified AA6061-T6 friction stir welds", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, June 2016
Vol. 232,
Num. 10,
Page 816-828,
June 2016,
44
Saleh Alaei Behmand, Seyed Ehsan Mirsalehi, Hamid Omidvar, Mohammad Ali Safarkhanian, "Interfacial and Mechanical Behavior of AA5456 Filling Friction-Stir-Welded Lap Joints Using Similar and Dissimilar Pins", METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, June 2016
Vol. 0,
Num. 0,
Page 0-0,
June 2016,
45
Mahmoud Abbasi, Amin Abdollahzadeh, Hamid Omidvar, Behruz Bagheri Vanani, Milad Rezaei, "Incorporation of SiC particles in FS welded zone of AZ31 Mg alloy to improve the mechanical properties and corrosion resistance", INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, May 2016
Vol. 107,
Num. 6,
Page 566-572,
May 2016,
46
Vahid Maleki, Hamid Omidvar, Mohammad-Reza Rahimipour, "Effect of gap size on microstructure of transient liquid phase bonded IN-738LC superalloy", TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, February 2016
Vol. 26,
Num. 0,
Page 437-447,
February 2016,
47
Sajad Shakerin, Hamid Omidvar, Seyed Ehsan Mirsalehi, "The effect of substrates heat treatment on microstructural and mechanical evolution of transient liquid phase bonded IN-738 LC", MATERIALS & DESIGN, January 2016
Vol. 89,
Num. 1,
Page 611-619,
January 2016,
48
Mahmoud Abbasi , Amin Abdollahzadeh, Behruz Bagheri Vanani, Hamid Omidvar, "The Effect of SiC Particle Addition During FSW on Microstructure and Mechanical Properties of AZ31 Magnesium Alloy", JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, December 2015
Vol. 24,
Num. 12,
Page 5037-5045,
December 2015,
49
Mohammad Reza Pishevare Daem, Jamshid Aghazadeh Mohandesi, Hamid Omidvar, Mohammadali Safarkhanian, "Influences of Friction Stir Welding Parameters on Microstructural and Mechanical Properties of AA5456 (AlMg5) at Different Lap Joint Thicknesses", JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, October 2015
Vol. 24,
Num. 10,
Page 3835-3844,
October 2015,
50
Sajad Shakerin, Hamid Omidvar, Seyed Ehsan Mirsalehi, "The effect of substrates heat treatment on microstructural and mechanical evolution of transient liquid phase bonded IN-738 LC", MATERIALS & DESIGN, October 2015
Vol. -,
Num. 0,
Page 0-0,
October 2015,
51
Saleh Alaei Behmand, Seyed Ehsan Mirsalehi, Hamid Omidvar, Mohammad Ali Safarkhanian, "Single- and double-pass FSW lap joining of AA5456 sheets with different thicknesses", MATERIALS SCIENCE AND TECHNOLOGY, July 2015
Vol. 0,
Num. 0,
Page 0-0,
July 2015,
52
Mohammad Sajjadnejad, Hamid Omidvar, Mehran Javanbakht, Mozafari, Ali Asghar, "Characterization of Pure Nickel Coatings Fabricated
under Pulse Current Conditions", World Academy of Science, Engineering and Technology, June 2015
Vol. 9,
Num. 8,
Page 998-1002,
June 2015,
53
Saleh Alaei Behmand, Seyed Ehsan Mirsalehi, Hamid Omidvar, Ali Mohammad Safarkhanian, "Filling exit holes of friction stir welding lap joints using consumable pin tools", SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, April 2015
Vol. -,
Num. 0,
Page 0-0,
April 2015,
54
Fatemeh Fathollahi, Mehran Javanbakht, Hamid Omidvar, Mehdi Ghaemi, "LiFePO4/C composite cathode via CuO modified graphene nanosheets
with enhanced electrochemical performan", JOURNAL OF ALLOYS AND COMPOUNDS, April 2015
Vol. 1,
Num. 643,
Page 40-48,
April 2015,
55
Hadi Sohrabi, S.Hadi Tabaian, Hamid Omidvar, Mohammad Sajjadnejad, Mozafari, Ali Asghar, "Synthesis of Nanostructured TiO2 Coatings by Sol-Gel Method: Structural and Morphological Studies", SYNTHESIS AND REACTIVITY IN INORGANIC METAL-ORGANIC AND NANO-METAL CHEMISTRY, April 2015
Vol. 46,
Num. 3,
Page 414-422,
April 2015,
56
Hamid Omidvar, M. Sajjadnejad, G. Stremsdoerfer, Yunny Meas, A. Mozafari, "Characterization of NiBP-graphite composite coatings deposited by dynamic chemical plating", ANTI-CORROSION METHODS AND MATERIALS, February 2015
Vol. 62,
Num. 2,
Page 116-122,
February 2015,
57
Hamid Omidvar, M.Sajjadnejad, G. Stremsdoerfer, Y. Meas, A. Mozafari, "Manufacturing Ternary Alloy NiBP-PTFE Composite
Coatings by Dynamic Chemical Plating Process", MATERIALS AND MANUFACTURING PROCESSES, January 2015
Vol. 0,
Num. 0,
Page 0-0,
January 2015,
58
Mahdi Karimimanesh, Iraj Sattari Far, Hamid Omidvar, "EFFECTS OF ARC HEAT INPUT AND WELDING SPEED ON THE CRYOGENIC IMPACT STRENGTH OF TYPE 304L AUSTENITIC STAINLESS STEEL WELD METAL", , January 2015
Vol. 15,
Num. 2,
Page 205-213,
January 2015,
59
Hamid Omidvar, Mohammad Sajjadnejad, Stremsdoerfer, Guy , Meas, Yunny Meas, Mozafari, Ali Asghar, "Composite NiB–Graphite and NiB–PTFE Surface Coatings Deposited by the Dynamic Chemical Plating Technique", MATERIALS AND MANUFACTURING PROCESSES, January 2015
Vol. 31,
Num. 0,
Page 24-30,
January 2015,
60
Fatemeh Fathollahi, Mehran Javanbakht, Hamid Omidvar, Mehdi Ghaemi, "Improved electrochemical properties of LiFePO4/graphene cathode
nanocomposite prepared by one-step hydrothermal method", JOURNAL OF ALLOYS AND COMPOUNDS, December 2014
Vol. 627,
Num. 0,
Page 146-152,
December 2014,
61
M. Abbasi, Behruz Bagheri Vanani, M. Dadaei, Hamid Omidvar, Milad Rezaei, "The effect of FSP on mechanical, tribological, and corrosion behavior of composite layer developed on magnesium AZ91 alloy surface", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, November 2014
Vol. 0,
Num. 0,
Page 0-0,
November 2014,
62
Amin Abdollahzadeh, Hamid Omidvar, Mohammad Ali Safarkhanian, Mohsen Bahrami, "Studying microstructure and mechanical properties of SiC-incorporated AZ31 joints fabricated through FSW: the effects of rotational and traveling speeds", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, August 2014
Vol. 75,
Num. 0,
Page 1189-1196,
August 2014,
63
Mohammad Sajjadnejad, Hamid Omidvar, Mehran Javanbakht, R. Pooladi, A. Mozafari, "Direct current electrodeposition of Zn and
Zn–SiC nanocomposite coatings", TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, July 2014
Vol. 92,
Num. 4,
Page 227-232,
July 2014,
64
Yosef Arman, Hamid Omidvar, S.Hadi Tabaian, M.Sajjadnejad, Shahpar Fouladvand, Shahrara Afshar, "Evaluation of nanostructured S-doped TiO2 thin films and their photoelectrochemical application as photoanode for corrosion protection of 304 stainless steel", SURFACE & COATINGS TECHNOLOGY, July 2014
Vol. 251,
Num. 1,
Page 162-169,
July 2014,
65
Shima Damghanian, Hamid Omidvar, S.Hadi Tabaian, Amir Reza Azadmehr, "FABRICATION OF A “CONE PAA NANOSTRUCTURE” BY GRADUAL DECREASE OF VOLTAGE", Iranian Journal of Materials Science and Engineering, June 2014
Vol. 11,
Num. 2,
Page 71-78,
June 2014,
66
Vahid Mazinani, S.Hadi Tabaian, Milad Rezaei, Mahdiyeh Mallahi, Mohsen Mohammadijoo, Hamid Omidvar, "Synthesis and Characterization of Nafion-ZrOH-CaO Hybrid Membrane for Proton Exchange Membrane Fuel Cell", JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, May 2014
Vol. 11,
Num. 11,
Page 1-6,
May 2014,
67
Mostafa Dadaei, Hamid Omidvar, Behruz Bagheri Vanani, Mohammad Jahazi, Mahmoud Abbasi, "The effect of SiC/Al2O3 particles used during FSP on mechanical properties of AZ91 magnesium alloy", INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, April 2014
Vol. 105,
Num. 4,
Page 369-374,
April 2014,
68
Vahid Jalilvand, Hamid Omidvar, Hamid Khorrami, "Effect of welding parameters on the mechanical properties of AA2024 aluminium alloy joints welded by resistance seam welding", CANADIAN METALLURGICAL QUARTERLY, April 2014
Vol. 53,
Num. 2,
Page 117-124,
April 2014,
69
Mehran Javanbakht, Mohadeseh Rastgooy Deylami, Mehdi Ghaemi, Laila Naji, Hamid Omidvar, Mohammad Reza Ganjali, "Synthesis and Electrochemical Properties of Rhombohedral LiFePO4/C Microcrystals Via a Hydrothermal Route for Lithium Ion Batteries", INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, March 2014
Vol. 9,
Num. 1,
Page 3199-3208,
March 2014,
70
Ali Alavi Nia, Hamid Omidvar, S.H. Nourbakhsh, "Effects of an overlapping multi-pass friction stir process and rapid cooling on the mechanical properties and microstructure of AZ31 magnesium alloy", MATERIALS & DESIGN, March 2014
Vol. 58,
Num. 0,
Page 298-304,
March 2014,
71
Ali Alavi Nia, Hamid Omidvar, S. H. Nourbakhsh, "Effect of overlapping ratio and rapid cooling in friction stir process on the microstructure and mechanical properties of AZ31 alloy", , February 2014
Vol. 13,
Num. 15,
Page 126-135,
February 2014,
72
Reza Ranjbar, Malek Naderi, Hamid Omidvar, Gh. Amoabediny, "Gold Recovery From Copper Anode Slime By Means of Magnetite Nanoparticles (MNPs)", HYDROMETALLURGY, January 2014
Vol. 143,
Num. 0,
Page 54-59,
January 2014,
73
M. Sajjadnejad, Ali Mozafari, Hamid Omidvar, Mehran Javanbakht, "Preparation and corrosion resistance of pulse electrodepositedZn and Zn–SiC nanocomposite coatings", APPLIED SURFACE SCIENCE, January 2014
Vol. 300,
Num. 300,
Page 1-7,
January 2014,
74
Khadijeh Esmati, Hamid Omidvar, J. Jelokhani, Malek Naderi, "Study on the microstructure and mechanical properties of diffusion brazing joint of C17200 Copper Beryllium alloy", MATERIALS & DESIGN, December 2013
Vol. 53,
Num. 0,
Page 766-773,
December 2013,
75
M.Sajjadnejad, A. Yazdani, Hamid Omidvar, A. Mozafari, "Investigation of the corrosion and morphological behavior of Zn-SiC nanocomposite thin film produced under pulse current conditions", , December 2013
Vol. 3,
Num. 9,
Page 63-72,
December 2013,
76
Hojatolah Rezaei, Hamid Omidvar, Reza Pooladi, "Increasing the Performance of Machinery Tools by Super Hard Nanostructured Materials Reinforced with Nanoporous Aluminium Oxide", Advanced Materials Research (AMR), November 2013
Vol. 829,
Num. 0,
Page 482-486,
November 2013,
77
Mohadeseh Rastgooy Deylami, Mehran Javanbakht, Mehdi Ghaemi, Hamid Omidvar, Hossein Ghfarian Zahmatkesh, "Effect of first stage temperature on the hydrothermal synthesis of flower-like lithium iron phosphate", Analytical and Bioanalytical Electrochemistry, August 2013
Vol. 5,
Num. 4,
Page 506-516,
August 2013,
78
A. Alavi Nia, Hamid Omidvar, S. H. Nourbakhsh, "Investigation of the effects of thread pitch and water cooling action on the mechanical strength and microstructure of friction stir processed AZ31", MATERIALS & DESIGN, June 2013
Vol. 52,
Num. 0,
Page 615-620,
June 2013,
79
Nafiseh Hassanzadeh Yazdi, Hamid Omidvar, Mojtaba Pourbafrani, S.Hadi Tabaian, "Infuence of Anodizing Parameters on Pore Diameter of Anodic Aluminium Oxide (AAO) Films Using Taguchi Design", ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, June 2013
Vol. 38,
Num. 38,
Page 1305-1312,
June 2013,
80
Vahid Jalilvand, Hamid Omidvar, M. R. Rahimipour, H. R. Shakeri, "Influence of bonding variables on transient liquid phase bonding behavior of nickel based superalloy IN-738LC", MATERIALS & DESIGN, May 2013
Vol. 52,
Num. 0,
Page 36-46,
May 2013,
81
Reza Bahrami, Hamid Omidvar, Shahab Aldin Zangeneh, Mostafa Ketabchi, "Solid state diffusion bonding of Ti-6Al-4V and Co-28Cr-5Mo-0.3C", MATERIALS SCIENCE AND TECHNOLOGY, May 2013
Vol. 29,
Num. 8,
Page 908-912,
May 2013,
82
Vahid Jalilvand, Hamid Omidvar, Mohammad Reza Rahimipour, Hamid Reza Shakeri, "Investigation on microstructural properties of transient liquid phase (TLP) bonded IN-738LC superalloy with AMS 4776 filler metal", MATERIALS SCIENCE AND TECHNOLOGY, March 2013
Vol. 29,
Num. 4,
Page 439-445,
March 2013,
83
Vahid Jalilvand, Hamid Omidvar, Hamid Reza Shakeri, Mohammad Reza Rahimipour, "A study on the effect of process parameters on the properties of joint in TLP bonded Inconel 738LC superalloy", METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, March 2013
Vol. 0,
Num. 0,
Page 0-0,
March 2013,
84
Vahid Jalilvand, Hamid Omidvar, Hamid Reza Shakeri, Mohammad Reza Rahimipour, "Microstructural evolution during transient liquid phase (TLP) bonding of Inconel 738LC using AMS 4777 filler alloy", MATERIALS CHARACTERIZATION, January 2013
Vol. 75,
Num. 0,
Page 20-28,
January 2013,
85
Ahmad Ahmadi Daryakenari, Mohammad Ahmadi Daryakenari, Yaser Bahari, Hamid Omidvar, "Preparation and Ethanol Sensing Properties of ZnO Nanoparticles via a Novel Sol-Gel Method", International Scholarly Research Network ISRN Applied Mathematics, December 2012
Vol. 2012,
Num. 2012,
Page 1-6,
December 2012,
86
Hamid Omidvar, Keivan Mirzaeie Fashalami , Mohammad Hosein Rahimi, Zahra Sadeghian, "A method for coating carbon nanotubes with titanium", NEW CARBON MATERIALS, December 2012
Vol. 27,
Num. 6,
Page 401-408,
December 2012,
87
Hamid Omidvar, Kaveh Kolahgar Azari, Ali Mohammad Taheri, Ali Akbar Saghafi, "Impact and Ballistic Behavior Optimization of Kevlar–Epoxy Composites by Taguchi Method", ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, November 2012
Vol. 0,
Num. 0,
Page 1-7,
November 2012,
88
Mohammad Sajjadnejad, Ali Yazdani, Hamid Omidvar, "Electrochemical deposition of Zn-Sic Nano composite coating and investigation of its corrosion behavior in marine environments", , September 2012
Vol. 2,
Num. 3,
Page 7-16,
September 2012,
89
Nafiseh Hassanzadeh Yazdi, Hamid Omidvar, S.Hadi Tabaian, "The Effect of Gradual Varying of Anodizing Voltage on the Morphology of Alumina Nanochannels", Nanoscience and Nanotechnology Letters, August 2012
Vol. 4,
Num. 0,
Page 553-558,
August 2012,
90
Hamid Omidvar, Hossein Heirani, Seied Reza Taghavipour, Naser Bagheri Moghadam, "Mapping of research system processes case study: passive defense of ministry of science research and technology", Rahyaft Journal, June 2012
Vol. 51,
Num. 2,
Page 51-64,
June 2012,
91
Aida Hosseinian, S.M.Hadavi, Hamid Omidvar, S.Hadi Tabaian, "Atmospheric Corrosion and Tarnishing of Pd-Ag Alloy (Using Taguchi Design of Experiment(", , December 2011
Vol. 1,
Num. 2,
Page 41-51,
December 2011,
92
Nafiseh Hassanzadeh Yazdi, Hamid Omidvar, S.Hadi Tabaian, "Chemical synthesis of high density and long polypyrrole nanowire arrays using alumina membrane and their hydrogen sensing properties", SUPERLATTICES AND MICROSTRUCTURES, December 2011
Vol. 1,
Num. 1,
Page 1-1,
December 2011,
93
Mohammad Amin Shafaat Gharamaleki, Hamid Omidvar, Behzad Falahe Ghanbari, "Prediction of hot compression flow curves of Ti-6Al-4V alloy in alpha + beta phase region", MATERIALS & DESIGN, December 2011
Vol. 32,
Num. 10,
Page 4689-4695,
December 2011,
94
Hamid Omidvar, Behzad Falahe Ghanbari, Morteza Tamizifar, "Flow behavior of commercial gradeTi-6Al-4V with lamellar structure in isotherm forging and kinetic analysis of process", , September 2011
Vol. 30,
Num. 2,
Page 23-35,
September 2011,
95
Hamid Omidvar, Saba Goodarzi, Ahmad Seif, Amir Reza Azadmehr, "Influence of anodization parameters on the morphology
of TiO2 nanotube arrays", SUPERLATTICES AND MICROSTRUCTURES, May 2011
Vol. 50,
Num. 1,
Page 26-39,
May 2011,
96
Hamid Omidvar, "Nanoscale Membrane Based on Filled nanoporous anodic alumina with proton-conducting polymer for fuel cell applications: Primary morphological evaluation", ECS Transactions, October 2009
Vol. 25,
Num. 1,
Page 0-0,
October 2009,
97
Hamid Omidvar, "Deposition of thin films of Ni-P and Ni-B-P by Dynamic Chemical Plating", Journal of Alloys and Compounds, October 2008
Vol. 466,
Num. 0,
Page 0-0,
October 2008,
98
Hamid Omidvar, "FORMATION OF COMPOSITE CU-GRAPHITE AND CU-PTFE COATINGS AND THEIR TRIBOLOGICAL CHARACTERIZATION", J Mater Sci, August 2008
Vol. 43,
Num. 0,
Page 0-0,
August 2008,
99
Tolaminejad, Behzad, Hamid Omidvar, Ali Mehriab, "An investigation into the effect of sintering heat treatment on the WHA alloy properties", , November 2007
Vol. 1,
Num. 3,
Page 43-47,
November 2007,
100
Guy Stremsdoerfer, Hamid Omidvar, Yunny Meas, "TiO2 nanoparticles role in NiB films formation with the Dynamic Chemical Plating deposition method", ECS Transactions (ECST), July 2007
Vol. 3,
Num. 21,
Page 105-109,
July 2007,
101
M.Tamizifar, Hamid Omidvar, S.Mohammad Taghi Salehi, Zahra Salehpour, Omid Khoshkalam, "The effect of processing parameters on shear bands in non-isothermal hot forging of Ti-6Al-4V", JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, January 2002
Vol. 18,
Num. 1,
Page 0-0,
January 2002,
aut.ac.ir