Pirooz Marashi - Amirkabir University of Technology

Special services: Faculty Members Students Graduates

Content

Pepole

Amirkabir University of Technology

Resume Service

Pirooz Marashi

Associate Professor
Department of Materials and Metallurgical Engineering
Materials Production and Synthesis

Download PDF فارسی

Email:

pmarashi

aut.ac.ir

Phone:

h-index (Scopus):

35.00

Citations (Scopus):

4765

Supervised PhD Theses

Thesis title

Date

Developing polyaniline nanocomposite coating on 304 stainless steel substrate to improve corrosion resistance

MOBINA MORADI
Other Supervisor: MILAD REZAEI

2024 Sep

Correlation of microstructure and high-temperature strength of Inconel 738LC joined using wide gap brazing

HOSSEIN ALINAGHIAN
Other Supervisor: ALI FARZADI

2021 Feb

Analysis of Hot Cracking Phenomena during Laser Metal Deposition of Inconel 718 Powder on A-286 Substrate

MASOUD ALIZADEH SHAMSABADI
Other Supervisor: Eslam RanjbarNoodeh

2020 Sep

Wear Properties of AZ31 Mg/ Graphene Surface Nanocomposite Produced by Friction Stir Processing

MOHSEN ARAB

2019 Feb

Numerical simulation of hydrogen cracking in X70 steel welds

ALI TALEBI HANZAEI

2018 Oct

Study the Effective Parameters in Production of Graphene-Silver Nanowire Hybrids via Chemical Methods and Their Physical Properties

ATIYEH NEKAHI

2015 Oct

Changing the Surface Chemistry with complex hamostructured layer (S/B/C/N) using plasma electrolysis

HOSSEIN TAVAKOLI & S.MOHAMMAD MUSAVI KHOEI
Other Supervisor:

2014 Jun

The effect of Sn dopant in LFS-N doped Graphene nanocomposite on the electrochemical properties of Li-ion batteries

SABA ZOMORRODI

2025 Aug

Supervised MSc Theses

Thesis title

Date

Fabrication and characterization of electrospun based-cellulose nanofibers loaded with Hypericum perforatum extract

KOSAR KABIR

2024 Oct

Investigation of Synthesis and Properties of Carbon-Based Composite Anode for Li-Batteries

ALI MANSOURI

2024 Oct

Investigation of synthesis and properties of LLZO garnet electrolyte for Li batteries

SHAHAAB SHIRANI

2024 Aug

Applying Ni-W-P Coatings containing Nano WS2 particles on Aluminium and investigating their wear and corrosion resistance

ZAHRA SADAT MAZLOOMTABAEE

2024 May

Fabrication and characterization of electrospun cinnamon loaded Zein-based Nanofibers

SEPIDEH GHANNAD NASHRY

2023 Jul

Fabrication and Investigation on Electrochemical Properties of ESB-GDC Composite Electrolyte in Low Temperature Solid Oxide Fuel Cells (LSOFCS)

MILAD ASGARI

2023 Jul

Investigation of catalyst infiltration on microstructure and electrochemical properties of LSCF cathode in low temperature solid oxide fuel cell

MARYAM IRANDOST

2023 Mar

Synthesis and analysis of microstructure and electrochemical properties of compounds containing ceria as electrolyte in low temperature solid oxide fuel cell

ALI ASKARI

2022 Oct

Synthesis and characterization of microstructure and electrochemical properties of ceria based cathode in low temperature SOFC

MARYAM HAGHANI

2022 Mar

Evaluation of the microstructure and tribological behaviour of stellite 6 coating produced by GTAW process

SEYYEDALI SEYYEDI

2021 Sep

Synthesis of MoS2-Graphene nanocomposite and investigation on its Photocatalyst Properties

MOHADESEH POUDINE

2021 Mar

Synthesis and characterization of hybrid graphene oxide-MOF for adsorption of methane gas

VAHID KAMRANI POUYA

2020 Sep

Synthesis and immobilization of silver nanoparticles on polydimethylsiloxane (PDXS) substrate

GHAZALEH LASHGARI

2019 Jul

Investigation on microstructural and electrochemical properties of Ni(OH)2-YSZ, Ni(OH)2-YSZ-rGO and NiO-YSZ nanocomposite coatings using electrophoretic deposition

DELARAM SALEHZADEH

2019 Feb

Study on the effect of Repair Welding on microstrocture and Mechnical Properties of 30ChN2MA Steel.

REZA ZAREI & Eslam RanjbarNoodeh
Other Supervisor:

2018 Sep

effect of radiation on the order of nanopores formed by the anodizing method

ZAHRA GHAEMI
Other Supervisor: shahyar Saramad

2018 Feb

Failure analysis of ethoxylate reactors coils of and proposing a solution for the problem

SADEGH BORJALI
Other Supervisor: Eslam RanjbarNoodeh

2017 Jul

Investigation of the effect of preheat, diameter and type of electrode on the microstructure and mechanical properties of SMAW welded X70 pipeline

MASOUD BASTANI & Eslam RanjbarNoodeh
Other Supervisor:

2017 Feb

Fabrication and charecterization of nano-fiber Polycaprolactone scaffold by using CNT for application in neural tissue engineering

FARNAZ GHONJIZADEHSAMANI & JAMSHID AGHAZADEH MOHANDESI
Other Supervisor:

2016 Sep

Investigation of the weld nugget growth and mechanical behavior of resistance spot welds

HASSAN EIZADI

2016 Mar

Cu-Ag Bimetallic nanoparticles synthesis synthesis by Polyol method

YASAMAN NIKNAFS
Other Supervisor: Davoud Haghshenas

2016 Jan

Improvement of ordering by irradiation methods in fabrication of nano-wires

MOHSEN REZAEI SHAHMIRZADI
Other Supervisor: ALI FARZADI

2015 Dec

Synthesis of Ag-Cu one dimensional structures by Polyol method

MARAL AFSHAR
Other Supervisor: Davoud Haghshenas

2015 Nov

molecular dynamic simulation of mechanical properties of ZnO nanowire

SHIMA GHAEMI

2015 Jan

synthesis of ZnO nanowire/nanorod by wet chemical method

MAHSHID POORNAJAR
Other Supervisor: Davoud Haghshenas

2014 Dec

molecular dynamic simulation of heat distribution and sttee on nanoscale linear friction welding between Ni-Al

SAYYED MOHAMMAD YOUSEF TAHERI

2014 Oct

Friction Stir Spot Welding of Advance High Strength Steels (AHSS

OMID ABEDINI
Other Supervisor: Eslam RanjbarNoodeh

2014 Oct

Microstructure and mechanical properties of Magnesium alloy AZ31/ZrO2 surface nanocomposite produced by Friction Stir Processing (FSP

ABBAS RASHVAND

2013 Oct

Study of the effective parameters on the synthesis of Copper Nanowires by wet chemical method

MARYAM SADAT HOSSEINI
Other Supervisor: Davoud Haghshenas

2013 Oct

Investigation of Metallurgical and Mechanical Characteristics of Resistance Spot Welds of Stainless Steels

MASOUD ALIZADEH SHAMSABADI

2013 Oct

investigation of electrochemical parameters on electrodeposition of ZnO nanowires

ELAHE AKBARI

2013 Feb

Study the effect of isometric specification and heat treatment on piezoelectric property of ZnO nanowires

NOOSHIN SADAT AYATI

2013 Feb

Synthesize of Zirconium conductive ceramic membrane with NASICON nanostructure

FAEZEH EJEHEI

2012 Jan

Separation of lithium ions by electrodialysis using NASICON nanostructure

SIMA AREFI

2011 Oct

Microstructure and Failure Behavior of Similar and Dissimilar Resistance Spot Welds of Martensitic Advanced High Strength Steels

DORSASADAT SAFANAMA

2011 Jul

Fabrication and

ELMIRA SHAFIEE

2011 Jan

properties

PEGAH EMAMGHOLYZADEH SAYYAR

2011 Jan

fabrication

SHIMA MONTAZERI NAMIN
Other Supervisor: shahyar Saramad

2011 Jan

Astudy on the structure , mechanical strength and failure behavior of laser spot welds of carbon steel sheets

MARYAM MASOUMI

2010 Jan

investigation and manufacturing of ceramic ion exchange membrane for electrodialysis process

MOHAMMAD REZA GHAANI

2010 Jan

investigation of the influence of PH and temperature on the magnetic properties of Fe-Co nanowires

MINA SALEHI
Other Supervisor: shahyar Saramad

2009 Nov

Production of Porous Alumina Membrane and Synthesis of alloyed Fe-Co nanowires by Electroplating Method by Means of Taguchi Approch

MOHSEN ARAB

2009 Feb

The effects of austempering temperature and time , and quenching temperature on the structure and mechanical properties of austempered ductile irons (ADI

KAJAL SOHRABI
Other Supervisor: SEYED MOHAMMAD H. MIRBAGHERI

2009 Feb

PREPARATION OF MEMBRANE AND FABRICATION OF METAL NANOWIRE BY ELECTRODEPOSITION PROCESS

YOUNES ETEMAD & S.HADI TABAIAN
Other Supervisor:

2008 Apr

ALLOY MAKING AND PRESSURE DIE CASTING OF ALUMINUM ALLOY A242.2

VAHID ASHOFTEH

2007 Dec

COMPARISON OF DIFFERENT XRD METHODS, TEM AND AFM FOR MEASURING ALUMINA NANO POWEDERS

NARGES ASADPOOR CHALO

2007 Sep

Synthesis and characterization of amino alcohol-based poly(esteramide)

ASMA REZAIAN

2026 May

Books

Title

Author(s)

Publisher country

publication date

version

Crystallography in Materials Engineering

P. Marashi, Majid Pouranvari, Masih Rezaie, Dorsasadat Safanama

Iran

Nanocrystals: Synthesis, Properties and Applications

P. Marashi, A. Amirjani, D. Haghshenas

Iran

mechanical behavior of materials

J. Aghazadeh Mohandesi, P. Marashi, M. Rezaee

Iran

mechanical behavior of materials

J. Aghazadeh Mohandesi, P. Marashi, M. Rezaee

Iran

Physics and Chemistry of Interfaces

Alireza Zolfaghari, P. Marashi, D. Haghshenas Fatmehsari

Iran

Fundamentals and Applications of Electron Microscopes and Analysis Methods as Nano World Investigation Tools (second edition)

P. Marashi, Saeed Kaviani, Hossein Sarpoolaky, Alireza Zolfaghari

Iran

Mechanical Properties of Nanomaterials

J. Aghazadeh Mohandesi, P. Marashi, M. Rezaee

Iran

Fundamentals of Metals Casting

, P. Marashi, M. Rezaee

Iran

Scanning Probe Microscope, a lab on a tip

P. Marashi, Alireza Zolfaghari, Mohammad Almasi, Mehrdad Nojaba, Omid Seify

Iran

Scanning Probe Microscopy, a Lab on a Tip

Alireza Zolfaghari, Mohammad Almasi, P. Marashi,

Iran

Fundamentals and Applications of Electron Microscopes and Analysis Methods as Nano World Investigation Tools (second edition)

P. Marashi, , , A. Zolfaghary

Iran

Journal Papers

A.T. Hanzaei, E. Mueller, P. Marashi, E. Ranjbarnodeh, E. Cheraghi Rizi, "Numerical evaluation of hydrogen-induced cracking susceptibility in X70 steel welds using finite-element method", Journal of Materials Research and Technology-Jmr and T, 2026 Jun vol. 42, no. , pp.11376-11387, 2026.

A. Babaei, M. Rezaei, P. Marashi, W.M. Rainforth, "Synergistic Cu-Sb oxide electrocatalyst synthesized by sol-gel method for high-efficiency nitrate reduction to ammonia with suppressed hydrogen evolution", Scientific Reports, 2025 Dec vol. , no. , pp.1-29, 2025.

M. Hajiha, A. Farzadi, P. Marashi, E. Raji, H. Alinaghian, "Solidification microstructure, post-braze heat treatment, and stress rupture of wide gap brazed Inconel 738", Welding In The World, 2025 Sep vol. 0, no. 0, , 2025.

M. Moradi, M. Rezaei, P. Marashi, William Mark Rainforth, "Theoretical evaluation of anti-corrosion PANI-composite coating based on protection and interface mechanical features using Molecular dynamics, Monte Carlo, and DFT simulations", Surfaces and Interfaces, 2025 Aug vol. 73, no. 107492, pp.1-18, 2025.

S. Zomorrodi, P. Marashi, Zahra Sadeghian, Soheila Javadian, "Synergistic enhancement of Li 2 FeSiO 4 cathode material via Sn (IV) and nitrogen-doped rGO co-doping strategy for lithium-ion batteries", Ionics, 2025 Jul vol. 9, no. 2, pp.167-178, 2025.

A. Seifi, M. Ghasemi, Movaffaq Kateb, P. Marashi, "Challenges in determining the thermal conductivity of core-shell nanowires by atomistic simulation", Journal of Chemical Physics, 2025 Mar vol. 162, no. 124706, pp.1-10, 2025.

M. Moradi, M. Rezaei, P. Marashi, William Mark Rainforth, "Evaluation of localized corrosion resistance in wireless anodic protection of PANI-304SS galvanic couple in the presence of gabapentin inhibitor: Molecular dynamics, Monte Carlo and electrochemical noise measurements", Journal of Molecular Liquids, 2025 Jan vol. 423, no. 126952, pp.1-13, 2025.

Mahyar Ghasemi، علیرضا سیفی, Movaffaq Kateb, Jon Tomas Gudmundsson, Pascal Brault, P. Marashi, "Probing trade-off between critical size and velocity in cold-spray: An atomistic simulation", Journal of Vacuum Science and Technology A, 2024 Nov vol. 42, no. 6, pp.1-13, 2024.

M. Moradi, M. Rezaei, P. Marashi, William Mark Rainforth, "Poly(aniline/aminophenol)-wrapped graphene nanoplates loaded with gabapentin inhibitor as a filler in poly(aniline/vinylalcohol/aminophenol)/acrylic coating to endow corrosion/wear durability by triple protection mechanism", Journal of Industrial and Engineering Chemistry, 2024 Sep vol. 0, no. 0, pp.1-15, 2024.

M. Moradi, M. Rezaei, P. Marashi, William Mark Rainforth, "Enhanced Anticorrosion, Antifouling, and Tribological Properties of PANI Composite Coating Reinforced by PVA, 2-Aminophenol, and Acrylic to Fabricate Sustainable Passive Film on 304 SS", Acs Applied Polymer Materials, 2024 Sep vol. 6, no. 18, pp.11586-11603, 2024.

M. Moradi, M. Rezaei, P. Marashi, William Mark Rainforth, "Smart Doped Polyaniline Coating for Wireless Anodic Protection of AISI 304 Stainless Steel in a Corrosive Medium Containing Sulfate and Chloride Ions: Electrochemical and DFT Evaluations", Langmuir, 2024 Jun vol. 40, no. 1, pp.13303-13318, 2024.

M. Moradi, P. Marashi, M. Rezaei, "An experimental study and Monte Carlo simulation about the polyaniline coating dopants impact on long-time corrosion resistance of 304 SS", Journal of Industrial and Engineering Chemistry, 2023 Aug vol. 128, no. 1, pp.1-16, 2023.

Majid Pouranvari, Hosein Albari, Mohammad Reza Passandeh, Hamid Sabahi, P. Marashi, "Metallurgical Failure Analysis of Cast HK40 Steel U-Clamp: Role of Shrinkage-Related Porosity", Journal of Failure Analysis and Prevention, 2023 Feb vol. 23, no. 1, pp.306-313, 2023.

H. Alinaghian, A. Farzadi, P. Marashi, M. Pouranvari, "Wide gap brazing using Ni-B-Si and Ni-B-Si-Cr-Fe filler metals: Microstructure and high-temperature mechanical properties", Journal of Materials Research and Technology-Jmr and T, 2023 Feb vol. 23, no. 0, pp.2329-2349, 2023.

H. Alinaghian, P. Marashi, A. Farzadi, Majid Pouranvari, "Microstructure and mechanical properties of Inconel 738LC joint by wide gap brazing using Amdry 718", , 2020 Dec vol. 52, no. 10, pp.1-10, 2020.

Mohammad Reza Ghaani, Amir Masoud Mohtasebi, Razie Tajeri, P. Marashi, "A Comparison of the Role of the Chelating Agent on the Structure of Lithium Conducting Solid Electrolyte Li1. 4Al0. 4Ti1. 6 (PO4) 3: Pechini vs. Modified Pechini-Type Methods", Batteries, 2020 Dec vol. 6, no. 4, pp.1-13, 2020.

H. Alinaghian, A. Farzadi, P. Marashi, Majid Pouranvari, "Wide Gap Brazing of Inconel 738LC Nickel-Based Superalloy: Metallurgical and Mechanical Characteristics", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2020 Dec vol. 51, no. 12, pp.6283-6293, 2020.

M. Alizadeh Shamsabadi, P. Marashi, E. Ranjbarnoodeh, Reza Shoja-razavi, "Laser cladding of Inconel 718 powder on a non-weldable substrate: Clad bead geometry-solidification cracking relationship", Journal of Manufacturing Processes, 2020 Aug vol. 56, no. 0, pp.54-62, 2020.

M. Alizadeh Shamsabadi, P. Marashi, E. Ranjbarnoodeh, Reza Shoja-razavi, Jo?o Pedro Oliveira, "Prediction of solidification cracking by an empirical-statistical analysis for laser cladding of Inconel 718 powder on a non-weldable substrate", Optics and Laser Technology, 2020 Aug vol. 128, no. 106244, pp.106244-106244, 2020.

D. Salehzadeh, Morteza Torabi, Zahra Sadeghian, P. Marashi, "A multiscale-architecture solid oxide fuel cell fabricated by electrophoretic deposition technique", Journal of Alloys and Compounds, 2020 Jul vol. 830, no. 4, pp.1-10, 2020.

M. Alizadeh Shamsabadi, P. Marashi, E. Ranjbarnoodeh, Reza Shoja Razavi, J. P. Oliveira, "Dissimilar laser cladding of Inconel 718 powder on A-286 substrate: Microstructural evolution", Journal of Laser Applications, 2020 May vol. 32, no. 0, pp.1-9, 2020.

D. Salehzadeh, Zahra Sadeghian, P. Marashi, "Enhanced protective properties of hydrothermally synthesized Ni(OH)2-YSZ/reduced graphene oxide (rGO) nanocomposite coating", Diamond and Related Materials, 2020 Jan vol. 101, no. 1, pp.1-7, 2020.

D. Salehzadeh, P. Marashi, Zahra Sadeghian, "Electrophoretic deposited Ni (OH) 2-YSZ and NiO-YSZ nanocomposite coatings, microstructural and electrochemical evaluation", Surface and Coatings Technology, 2019 Nov vol. 381, no. 11, pp.1-8, 2019.

M. Azadeh, Movaffaq Kateb, P. Marashi, "Determining phase transition using potential energy distribution and surface energy of Pd nanoparticles", Computational Materials Science, 2019 Aug vol. 170, no. 12, pp.1-11, 2019.

M. Arab, P. Marashi, "Effect of Graphene Nanoplatelets (GNPs) Content on Improvement of Mechanical and Tribological Properties of AZ31 Mg Matrix Nanocomposite", Tribology International, 2019 Jan vol. 132, no. 0, pp.1-5, 2019.

O. Abedini, M. Behroozi, P. Marashi, E. Ranjbarnoodeh, Majid Pouranvari, "Intercritical Heat Treatment Temperature Dependence of Mechanical Properties and Corrosion Resistance of Dual Phase Steel", Materials Research-Ibero-American Journal of Materials, 2019 Jan vol. 22, no. 1, pp.1-10, 2019.

M. Arab, P. Marashi, "Graphene Nanoplatelet (GNP)-Incorporated AZ31 Magnesium Nanocomposite: Microstructural, Mechanical and Tribological Properties", Tribology Letters, 2018 Dec vol. 66, no. 156, pp.1-11, 2018.

M.R. Ghaani, P. Marashi, "L16 orthogonal design synthesis of NASICON-Type Li1.4Al0.4Ti1.6(PO4)3 solid electrolyte by Pechini method for process optimization", Iranian Journal of Materials Science and Engineering, 2018 Sep vol. 15, no. 3, pp.60-71, 2018.

A. Talebi Hanzaei, P. Marashi, E. Ranjbarnoodeh, A. Hamdollahzadeh, "The Effect of Hydrogen Content and Welding Conditions on the Hydrogen Induced Cracking of the API X70 steel weld", , 2018 Aug vol. 4, no. 1, pp.29-41, 2018.

Rouholah Ashiri, P. Marashi, Yeong-do Park, "Weld Processing and Mechanical Responses of 1-GPa TRIP Steel Resistance Spot Welds", Welding Journal, 2018 May vol. 97, no. 5, pp.157-169, 2018.

A. Talebi Hanzaei, P. Marashi, E. Ranjbarnoodeh, "The effect of hydrogen content and welding conditions on the hydrogen induced cracking of the API X70 steel weld", International Journal of Hydrogen Energy, 2018 Apr vol. 43, no. 19, pp.9399-9407, 2018.

O. Abedini, E. Ranjbarnoodeh, P. Marashi, "Effect of tool geometry and welding parameters on the microstructure and static strength of the friction stir welded DP780 dual phase steels", Materiali In Tehnologije, 2017 Aug vol. 51, no. 4, pp.687-694, 2017.

M. Alizadeh Shamsabadi, P. Marashi, "Resistance spot welding of dissimilar austenitic/duplex stainless steels: Microstructural evolution and failure mode analysis", Journal of Manufacturing Processes, 2017 Jun vol. 28, no. 0, pp.186-196, 2017.

A. Jahangiri, P. Marashi, M. Mohammadaliha, V. Ashofteh, "The effect of pressure and pouring temperature on the porosity, microstructure, hardness and yield stress of AA2024 aluminum alloy during the squeeze casting process", Journal of Materials Processing Technology, 2017 Feb vol. 245, no. 1, pp.1-6, 2017.

Y. Niknafs, A. Amirjani, P. Marashi, D. Haghshenas, "Synthesis of Ag-Cu and Ag-Cu2O alloy nanoparticles using a seed-mediated polyol process, thermodynamic and kinetic aspects", Materials Chemistry and Physics, 2016 Dec vol. 189, no. 0, pp.1-17, 2016.

H. Eizadi, P. Marashi, "On the rsistace spot welding of four-sheet stack of unequal sheet thickness", Science and Technology of Welding and Joining, 2016 Oct vol. 21, no. 8, pp.632-635, 2016.

A. Nekahi, P. Marashi, D. Haghshenas, "High yield polyol synthesis of round- and sharp-end silver nanaowires with high aspect ratio", Materials Chemistry and Physics, 2016 Oct vol. 184, no. 10, pp.130-137, 2016.

H. L. Jaber, Majid Pouranvari, K. Salim, F. A. Hashim, P. Marashi, "Peak load and energy absorption of DP600 advanced steel resistance spot welds", Ironmaking and Steelmaking, 2016 Sep vol. 44, no. 9, pp.699-706, 2016.

P. Marashi, "DISSIMILAR SPOT WELDING OF DQSK/DP600 STEELS: THE WELD-NUGGET GROWTH", Materiali In Tehnologije, 2016 May vol. 50, no. 5, pp.761-765, 2016.

Majid Pouranvari, Mohammad Khorramifar, P. Marashi, "Ferritic-austenitic stainless steels dissimilar resistance spot welds: metallurgical and failure characteristics", Science and Technology of Welding and Joining, 2016 Apr vol. 21, no. 6, pp.438-445, 2016.

A. Nekahi, P. Marashi, D. Haghshenas, "Modified structure of graphene oxide by investigation of structure evolution", Bulletin of Materials Science, 2015 Dec vol. 38, no. 7, pp.1717-1722, 2015.

M. Poornajar, P. Marashi, D. Haghshenas, Mohammadreza Kolahdouz Esfahani, "Synthesis of ZnO nanorods via chemical bath deposition method: The effects of physicochemical factors", Ceramics International, 2015 Nov vol. 42, no. 0, pp.173-184, 2015.

A. Amirjani, P. Marashi, D. Haghshenas, "The effect of agitation state on polyol synthesis of silver nanowire", International Nano Letters, 2015 Nov vol. 6, no. 1, pp.41-44, 2015.

Masoud Alizadeh Shamsabadi, Majid Pouranvari, P. Marashi, "Welding metallurgy of stainless steels during resistance spot welding Part II-heat affected zone and mechanical performance", Science and Technology of Welding and Joining, 2015 Oct vol. 20, no. 6, pp.512-521, 2015.

Amirmostafa Amirjani, D. Haghshenas, P. Marashi, "Interactive effect of agitation rate and oxidative etching on growth mechanisms of silver nanowires during polyol process", Journal of Experimental Nanoscience, 2015 Oct vol. 10, no. 18, pp.1387-1400, 2015.

Majid Pouranvari, P. Marashi, Hassanen Latif Jaber, "DP780 DUAL-PHASE-STEEL SPOT WELDS: CRITICAL FUSION-ZONE SIZE ENSURING THE PULL-OUT FAILURE MODE", Materiali In Tehnologije, 2015 Oct vol. 49, no. 4, pp.579-585, 2015.

Majid Pouranvari, Masoud Alizadeh Shamsabadi, P. Marashi, "Welding metallurgy of stainless steels during resistance spot welding Part I: fusion zone", Science and Technology of Welding and Joining, 2015 Oct vol. 20, no. 6, pp.502-511, 2015.

Hossein Tavakoli, S. Musavi Khoei, F. Rasuli Nozari, P. Marashi, F. Momeni, "Electrochemical and physical characteristics of the steel treated by plasma-electrolysis boronizing", Surface and Coatings Technology, 2015 Aug vol. 276, no. 8, pp.529-533, 2015.

M.S. Hosseini, D. Haghshenas, P. Marashi, "Synthesis of different copper nanostructures by the use of polyol technique", Applied Physics A-Materials Science and Processing, 2015 Aug vol. 120, no. 8, pp.1579-1586, 2015.

Majid Pouranvari, P. Marashi, M. Alizadeh Shamsabadi, "Welding Metallurgy of Dissimilar AISI 430/DQSK Steels Resistance Spot Welds", Welding Journal, 2015 Jun vol. 94, no. 6, pp.203-210, 2015.

M. Salehi, P. Marashi, Maryam Salehi, R. Ghanad, "Optimization of the FeCo nanowire fabrication embeded in anodic aluminum oxide template by response surface methodology", Journal of Ultrafine Grained and Nanostructured Materials-Open, 2015 Jan vol. 47, no. 1, pp.27-35, 2015.

M. Alizadeh Shamsabadi, P. Marashi, Majid Pouranvari, "Microstructure-properties relationships in martensitic stainless steel resistance spot", Science and Technology of Welding and Joining, 2014 Aug vol. 19, no. 7, pp.595-602, 2014.

H. L. Jaber, Majid Pouranvari, P. Marashi, M. Alizadeh Shamsabadi, R. K. Salim, F. A. Hashim, "Dissimilar spot welding of dual phase steel/ferritic stainless steel: phase transformations", Science and Technology of Welding and Joining, 2014 Aug vol. 19, no. 7, pp.565-571, 2014.

A. Amirjani, P. Marashi, D. Haghshenas, "The effects of physicochemical parameters on the synthesis of silver nanowires via polyol method", International Nano Letters, 2014 May vol. 4, no. 108, pp.1-5, 2014.

A. Nekahi, P. Marashi, D. Haghshenas, "Transparent conductive thin film of ultra large reduced graphene oxide monolayers", Applied Surface Science, 2014 Feb vol. 295, no. 295, pp.59-65, 2014.

H. Tavakoli, S. Musavi Khoei, P. Marashi, S.a. Hosseini Mogadam, "Characterization of submicron-size layer produced by pulsed bipolar plasma electrolytic carbonitriding", Journal of Alloys and Compounds, 2014 Jan vol. 1, no. 583, pp.382-389, 2014.

M. Alizadeh Shamsabadi, P. Marashi, Majid Pouranvari, "Resistance spot welding of AISI 430 ferritic stainless steel: Phase transformations and mechanical properties", Materials and Design, 2014 Jan vol. 56, no. 1, pp.258-263, 2014.

E. Akbari, N.S. Ayati, P. Marashi, "Influence of deposition voltage on growth of ZnO nanowires by cathodic electrodeposition", Advanced Materials Research, 2014 Jan vol. 829, no. 1, pp.732-736, 2014.

Amirmostafa Amirjani, P. Marashi, D. Haghshenas Fatmehsari, "Effect of AgNO3addition rate on aspect ratio of CuCl2-mediatedsynthesized silver nanowires using response surface methodology", Colloids and Surfaces A-Physicochemical and Engineering Aspects, 2014 Jan vol. 444, no. 1, pp.33-39, 2014.

N.S. Ayati, E. Akbari, P. Marashi, S. Saramad, "Template assisted Growth of Zinc Oxide-based nanowires and piezoelectric properties", Advanced Materials Research, 2013 Dec vol. 829, no. 1, pp.757-761, 2013.

M. Alizadeh Shamsabadi, F. Falsafi, M. Masoumi, P. Marashi, Majid Pouranvari, "Laser spot welding of AISI 304L: metallurgical and mechanical properties", Ironmaking and Steelmaking, 2013 Apr vol. 0, no. 0, , 2013.

Majid Pouranvari, P. Marashi, "Critical review of automotive steels spot welding: process, structure and properties", Science and Technology of Welding and Joining, 2013 Apr vol. 0, no. 0, , 2013.

H. Tavakoli, S. Musavi Khoei, P. Marashi, Lomid Bolhasani, "Effect of Electrolyte Composition on Characteristics of Plasma Electrolysis Nitrocarburizing", Journal of Materials Engineering and Performance, 2013 Feb vol. 0, no. 0, , 2013.

F. Ejehei, P. Marashi, Mohammadreza Ghaani, D. Haghshenas Fatmehsari, "The synthesis of NaSICON-type ZrNb(PO4)3 structure by the use of Pechini method", Ceramics International, 2012 Dec vol. 38, no. 8, pp.6857-6863, 2012.

Majid Pouranvari, P. Marashi, "Failure Mode Transition in AISI 304 Resistance Spot Welds", Welding Journal, 2012 Nov vol. 91, no. 11, pp.303-309, 2012.

Majid Pouranvari, P. Marashi, "Failure Behavior of Three-Steel Sheets Resistance Spot Welds: Effect of Joint Design", Journal of Materials Engineering and Performance, 2012 Aug vol. 21, no. 8, pp.1669-1675, 2012.

E. Keshavarz Alamdari, Dariush Darvishi, M. Samadi Khoshkhoo, F.a. Javid, P. Marashi, "On the way to develop co-containing lead anodes for zinc electrowinning", Hydrometallurgy, 2012 May vol. 119-120, no. 0, pp.77-86, 2012.

Majid Pouranvari, P. Marashi, "On failure mode of resistance spot welded DP980 advanced high strength steel", Canadian Metallurgical Quarterly, 2012 Apr vol. 51, no. 4, pp.447-455, 2012.

D. Safanama, P. Marashi, Majid Pouranvari, "Similar and dissimilar resistance spot welding of martensitic advanced high strength steel and low carbon steel: metallurgical characteristics and failure mode transition", Science and Technology of Welding and Joining, 2012 Mar vol. 17, no. 4, pp.288-294, 2012.

Majid Pouranvari, P. Marashi, "Failure of resistance spot welds: tensile shear versus coach peel loading conditions", Ironmaking and Steelmaking, 2012 Feb vol. 39, no. 2, pp.104-111, 2012.

M.H. Rahimi, S. Tabaian, P. Marashi, S. Saramad, M. Arab, Ali Hemasian, "Heat treatment of aluminum in preparing porous anodic alumina templates", Micro and Nano Letters, 2012 Feb vol. 7, no. 2, pp.125-129, 2012.

Majid Pouranvari, P. Marashi, "Weld nugget formation and mechanical properties of three-sheet resistance spot welded low carbon steel", Canadian Metallurgical Quarterly, 2012 Jan vol. 51, no. 1, pp.105-109, 2012.

T. Shadloo, S. Firoozi, P. Marashi, Alireza Zolfaghari Hesari, M. Rezaee, Somayeh Jalilzadeh, "DETERMINATION OF THE ADHESION PROPERTIES OF MICA VIA ATOMIC FORCE SPECTROSCOPY", International Journal of Modern Physics:conference Series(Ijmpcs), 2012 Jan vol. 5, no. 1, pp.33-40, 2012.

D. Safanama, P. Marashi, Alireza Zolfaghari Hesari, S. Firoozi, Seyed Hamed Aboutalebi, Somayeh Jalilzadeh, "ELASTIC MODULUS MEASUREMENT OF NANOCOMPOSITE MATERIALS BY ATOMIC FORCE MICROSCOPY", International Journal of Modern Physics:conference Series(Ijmpcs), 2012 Jan vol. 5, no. 1, pp.502-509, 2012.

Majid Pouranvari, P. Marashi, "Dissimilar Spot Welds of AISI 304/AISI 1008: Metallurgical and Mechanical Characterization", Steel Research International, 2011 Dec vol. 82, no. 12, pp.1355-1361, 2011.

Majid Pouranvari, P. Marashi, "Failure mode transition in AHSS resistance spot welds. Part I. Controlling factors", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2011 Nov vol. 528, no. 29, pp.8337-8343, 2011.

Majid Pouranvari, P. Marashi, D. Safanama, "Failure mode transition in AHSS resistance spot welds. Part II: Experimental investigation and model validation", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2011 Nov vol. 528, no. 29, pp.8344-8352, 2011.

Majid Pouranvari, P. Marashi, Mostafa Mousavizadeh, "Dissimilar resistance spot welding of DP600 dual phase and AISI 1008 low carbon steels: correlation between weld microstructure and mechanical properties", Ironmaking and Steelmaking, 2011 Aug vol. 38, no. 6, pp.471-480, 2011.

Amir Abedi, P. Marashi, K. Sohrabi, S.M. Marvastian, S.M.H. Mirbagheri, "The effect of heat treatment parameters on microstructure and toughness of autempered ductile iron (ADI)", Advanced Materials Research, 2011 Jun vol. 264-265, no. 1, pp.409-414, 2011.

S.N. Mortazavi, P. Marashi, Majid Pouranvari, M. Masoumi, "Investigation on joint strength of dissimilar resistance spot welds of aluminum alloy and low carbon steel", Advanced Materials Research, 2011 Jun vol. 264, no. 1, pp.384-389, 2011.

Majid Pouranvari, Mostafa Mousavizadeh, P. Marashi, Masoud Goodarzi, Masoud Ghorbani, "Infuence of fusion zone size and failure mode on mechanical performance of dissimilar resistance spot welds of AISI 1008 low carbon steel and DP600 advanced high strength steel", Materials and Design, 2011 Mar vol. 32, no. 3, pp.1390-1398, 2011.

Majid Pouranvari, P. Marashi, "Critical sheet thickness for weld nugget growth during resistance spot welding of three-steel sheets", Science and Technology of Welding and Joining, 2011 Feb vol. 6, no. 2, pp.162-165, 2011.

Majid Pouranvari, P. Marashi, "Resistance Spot Welding of Unequal Thickness Low Carbon Steel Sheets", Advanced Materials Research, 2011 Jan vol. 83-86, no. 1, pp.1205-1211, 2011.

A. Tavassolizadeh, P. Marashi, Majid Pouranvari, "Mechanical performance of three thickness resistance spot welded low carbon steel", Materials Science and Technology, 2011 Jan vol. 27, no. 1, pp.219-224, 2011.

M. Salehi, P. Marashi, "Investigation of the influence of temberature and pH on the magnetic properties of FexCo1-x nanowires embeddd in porous anodic alumina template using response surface methodology", , 2010 Dec vol. 13, no. 39, pp.45-50, 2010.

Majid Pouranvari, P. Marashi, Seyed Mostafa Mousavizadeh, "The Effect of Welding Parameters on the Tensile-Shear Performance of Dissimilar DP600/St14 Resistance Spot Welds", Aip Advances, 2010 Dec vol. 1, no. 1, pp.831-836, 2010.

M. Masoumi, P. Marashi, Majid Pouranvari, "Metallurgical and Mechanical characterization of laser spot welded low carbon steel sheets", Steel Research International, 2010 Dec vol. 81, no. 12, pp.1144-1150, 2010.

Majid Pouranvari, P. Marashi, "The effect of expulsion on the energy absorption of low carbon steel resistance spot welds", Majlesi Journal of Mechanical Engineering, 2010 Dec vol. 4, no. 2, pp.43-48, 2010.

Majid Pouranvari, P. Marashi, "Resistance spot welding of AISI304 stainless steel and AISI1008 low carbon steel: macrocharacteristics, microcharacteristics and mechanical properties interrelations", , 2010 Dec vol. 4, no. 2, pp.35-49, 2010.

P. Marashi, Majid Pouranvari, M. Salehi, Amir Abedi, Saeed Kaviani, "Overload failure behaviour of dissimilar thickness resistance spot welds during tensile shear test", Materials Science and Technology, 2010 Oct vol. 26, no. 10, pp.1220-1225, 2010.

Majid Pouranvari, P. Marashi, "Factors affecting mechanical properties of resistance spot welds", Materials Science and Technology, 2010 Sep vol. 26, no. 9, pp.1137-1144, 2010.

Majid Pouranvari, P. Marashi, "On the failure of low carbon steel resistance spot welds in quasi-static tensile-shear loading", Materials and Design, 2010 Sep vol. 31, no. 8, pp.3647-3652, 2010.

Majid Pouranvari, P. Marashi, Masoud Goodarzi, "Failure mode transition and mechanical properties of similar and dissimilar resistance spot welds of DP600 and low carbon steels", Science and Technology of Welding and Joining, 2010 Jul vol. 15, no. 7, pp.625-631, 2010.

Fariba Nikoosohbat, Shahram Kheirandish, Masoud Goodarzi, Majid Pouranvari, P. Marashi, "Microstructure and failure behaviour of resistance spot welded DP980 dual phase steel", Materials Science and Technology, 2010 Jun vol. 26, no. 6, , 2010.

Majid Pouranvari, P. Marashi, "Minimum fusion zone size required to ensure pullout failure mode of resistance spot welds during tensile-shear test", Kovove Materialy-Metallic Materials, 2010 Mar vol. 48, no. 3, pp.197-202, 2010.

Majid Pouranvari, P. Marashi, "Key factors influencing mechanical performance of dual phase steel resistance spot welds", Science and Technology of Welding and Joining, 2010 Feb vol. 15, no. 2, pp.149-155, 2010.

Majid Pouranvari, P. Marashi, "Similar and dissimilar RSW of low carbon and austenitic stinless steels: effect of weld microstructure and hardness profile on failure mode", Materials Science and Technology, 2009 Dec vol. 25, no. 12, pp.1411-1416, 2009.

M.H. Rahimi, S. Saramad, S. Tabaian, P. Marashi, "Study the effect of striping in two-step anodizing process on pore arrangement of nano-porous alumina", Applied Surface Science, 2009 Oct vol. 256, no. 12, , 2009.

Majid Pouranvari, P. Marashi, Mostafa Mousavizadeh, "Microstructure and failure behavior of dissimilar resistance spot welding of DP600 and low carbon St14 steels", , 2009 Sep vol. 3, no. 3, pp.15-27, 2009.

100

, P. Marashi, N. Parvin, "The effect of intercritical heat treatment temperature on the tensile properties and work hardening behavior of ferrite-martensite dual phase steel sheets", , 2009 Aug vol. , no. 518, , 2009.

101

M. Salari, M. Rezaee, P. Marashi, "Solid State Preparation of TiO2 Nanoparticles in Optimal NaCl: TiOSO4 Weight Ratio and Milling Time", Journal of Nano Research, 2009 Jun vol. 6, no. 6, pp.1-7, 2009.

102

P. Marashi, C.m Davies, "Effect of Melt-Spinning Roll Speed on the Nanostructure and Magnetic Properties of Stoichiometric and Near Stoichiometric Nd-Fe-B Alloy Ribbons", , 2009 May vol. , no. 42, , 2009.

103

M. Goudarzi, P. Marashi, M. Pouran-vary, "Dependence of overload performance on weld attributes for resistance spot welded galvanized low carbon steel", Journal of Materials Processing Technology, 2009 May vol. , no. 209, , 2009.

104

M. Salari, M. Rezaee, P. Marashi, Seyed Hamed Aboutalebi, "The role of the diluent phase in the mechanochemical preparation of TiO2 nanoparticles", Powder Technology, 2009 May vol. 192, no. 1, pp.54-57, 2009.

105

Majid Pouranvari, P. Marashi, "FAILURE BEHAVIOUR OF RESISTANCE SPOT WELDED LOW CARBON STEEL IN TENSILE-SHEAR AND COACH-PEEL TESTS: A COMPARATIVE STUDY", Metalurgija, 2009 Feb vol. 15, no. 3, pp.149-155, 2009.

106

M. Salari, S. Musavi Khoei, P. Marashi, M. Rezaee, "Synthesis of TiO2 nanoparticles via a novel mechanochemical method", Journal of Alloys and Compounds, 2009 Feb vol. , no. 469, , 2009.

107

P. Marashi, M. Pouran-vary, , "Relationship Between Failure Behaviour and Weld Fusion Zone Attributes of Austenitic Stainless Steel Resistance Spot Welds", Materials Science and Technology, 2008 Nov vol. , no. 12, , 2008.

108

N. Parvin, R. Asadifard, P. Saffarzadeh, S. Sheibany, P. Marashi, "Preparation and mechanical properties of SiC-reinforced Al6061 composite by mechanical alloying", , 2008 Sep vol. , no. 492, , 2008.

109

M. Salari, M. Rezaee, S. Musavi Khoei, P. Marashi, "Effect of Milling Time on Mechanochemical Synthesis of Tio2 Nanoparticles", International Journal of Modern Physics B, 2008 Aug vol. , no. 22, , 2008.

110

P. Marashi, M. Pouran-vary, , "Microstructure and failure behavior of dissimilar resistance spot welds between low carbon galvanized and austenitic stainless steels", Materials Science and Engineering A, 2008 May vol. , no. 480, , 2008.

111

M.H. Rahimi, S. Tabaian, P. Marashi, , , S. Saramad, A. Ramezani, "The Effect of Aluminum Electropolishing on Nano-Pores Arrangement in Anodic Alumina Membranes", International Journal of Modern Physics B, 2008 May vol. , no. 0, , 2008.

112

M. Pouran-vary, A. Abedi, P. Marashi, "Effect of Expulsion on Peak Load and Energy Absorption of Low Carbon Steel Resistance Spot Welds", Science and Technology of Welding and Joining, 2008 Jan vol. , no. 1, , 2008.

113

M. Nurmohammadi, M. Zarei, P. Marashi, "Optimum Self -Ordered Nanopore Arrays With 130-270 NM Interpore Distances Formed By Hard Anodization in Sulfuric/Oxalic Acid Mixtures", , 2007 Nov vol. , no. 40, , 2007.

114

Majid Pouranvari, P. Marashi, Masoud Goodarzi, Hamed Bahmanpur, "Metallurgical Factors Affecting Failure Mode of Resistance Spot Welds", Materials Science and Technology, 2007 Oct vol. 1, no. 1, pp.2465-2473, 2007.

115

M. Salari, M. Rezaee, S. Musavi Khoei, P. Marashi, "Titanium Oxide Synthesis Methods", , 2007 Jul vol. , no. 10, , 2007.

116

M. Pouran-vary, H.R. Asghary, P. Marashi, M. Goudarzi, "Effect of Weld Nugget Size on Overload Failure Mode of Resistance Spot Welds", Science and Technology of Welding and Joining, 2007 Jan vol. , no. 3, , 2007.

117

S.R. Younesi, , E. Keshavarz Alamdari, P. Marashi, "Kinetic Mechanisms of Cementation of Cadmium Ions by Zinc Powder From Sulphate Solutions", Hydrometallurgy, 2006 Nov vol. , no. 84, , 2006.

118

P. Marashi, "Tem investigation of rapidily solidified NdFeB hard magnetic material", Iranian Journal of Materials Science and Engineering, 2004 Apr vol. , no. 3, , 2004.

119

P. Marashi, "MFM of Nanocrystalline NdFeB:a Study of The Effect of Processing Rout on The Micromagnetic Structure", , 1998 Jan vol. , no. , , 1998.

Conference Papers

N. Alinejadghomi, , P. Marashi, "The Study Of The Effect Of Green Inhibitors On Iron Corrosion Using Molecular dynamics simulation,", The 12th international conference on materials science & metallurgical engineering, Nov 2023.

M. Irandost, Niloufar Afshar, P. Marashi, Zahra Sadeghian, "Investigation of the effect of inoculation of copper and cerium as electrocatalysts on the microstructure of LSM cathode of high temperature solid oxide fuel cell,", 3rd Iranian Catalyst Conference (ICC2022), May 2022.

A. Mohammadsadegh, E. Ranjbarnoodeh, P. Marashi, "Lap joining of Al 5083 to polyamide 6 using TIG welding process,", 4th International Conference on Welding and Non Destructive Testing(ICWNDT 2022(, Mar 2022.

S. Seyyedi, P. Marashi, Amin Owhadi Esfahani, M.H. Yazdani, "Optimization of Satellite 6 repairing coating on L316 stainless steel using response surface methodology,", 10th International Conference on Materials Science & Metallurgical Engineering (iMat2021), Nov 2021.

S. Seyyedi, P. Marashi, M. Poudine, Zakaria Rostamkhani, "Investigation of microstructure and erosion behavior of Satellite 6 repairing coating on Globe valve sealing parts made of stainless steel L316,", The First National Conference On Advanced Technologies In The Oil, Gas, Refining & Petrochemical Industries, Oct 2021.

M. Bastani, E. Ranjbarnoodeh, P. Marashi, Mohammad Abdolvand, "Investigation of the effect of E8010, E8018 electrodes, Size and Preheat on substructures and mechanical properties of SMAW welded X70 pipeline,", 5th international conference on materials engineering&metallurgy, Nov 2016.

Z. Tajbakhshjou, E. Ranjbarnoodeh, A. Farzadi, P. Marashi, "Finite element simulation of heat transfer during pulsed laser welding of dissimilar joint of low carbon steel to stainless steel,", 16th National conference on welding and inspection, Dec 2015.

M. Afshar, P. Marashi, D. Haghshenas, A. Amirjani, "Synthesis of Ag-Cu2O one dimensional nanostructures by Polyol method,", 3rd International Engineering Materials & metallurgy, Nov 2015.

M. Rezaei Shahmirzadi, P. Marashi, S. Saramad, "Study the effect of alpha radiation on regularity of nano porous anodic alumina fabricated by anodizing,", 4th International Conference on Materials Engineering and Metallurgy, Nov 2015.

Y. Niknafs, P. Marashi, D. Haghshenas, A. Amirjani, "Size-controlled synthesis of silver-Copper bimetallic nanoparticles using Ammonia in Polyol process,", 4th International Engineering Materials and Metallurgy Conference, Nov 2015.

M. Rezaei Shahmirzadi, P. Marashi, S. Saramad, "Investigating the effect of alpha irradiation on the order of Anodic Aluminum Oxide (AAO) template, prepared by anodizing method.,", 4th International Conference & 9th Congress Iranian Metallurgical & Materials Engineering Society & Iranian Foundrymen Society, Nov 2015.

M. Afshar, Amir Mostafa Amirjani, P. Marashi, D. Haghshenas, "The influence of phisicochemical parameters on synthesized Copper nanostructures by polyol method,", The 3rd National Conference on Nanotechnology from Theory to application, Feb 2015.

Y. Niknafs, Amir Mostafa Amirjani, P. Marashi, D. Haghshenas, "Size-controlled synthesis of silver nanoparticles using Ammonia in Polyol process,", Third national nano conference(from theory to application, Feb 2015.

S. Ghaemi, P. Marashi, Movafagh Kateb, "Molecular dynamic simulation of the effect of point defect on zinc oxide nanowire,", Third national nano conference (from theory to application), Feb 2015.

M. Rahmati, P. Marashi, Movafagh Kateb, "Molecular dynamic simulation of Cu nanoparticle behavior during surface indentations,", 8th Congress & 3rd International Engineering Materials & Metallurgy Conference, Nov 2014.

A. Nekahi, P. Marashi, D. Haghshenas, "Growth of long silver nanowires in high yield polyol process,", 5th international congress on nanoscience and nanotechnology, Oct 2014.

A. Nekahi, P. Marashi, D. Haghshenas, "Production ultra large reduced graphene oxide sheets and its transparent conductive thin film,", 5th International Congress on Nanoscience and Nanotechnology, Oct 2014.

A. Nekahi, P. Marashi, D. Haghshenas, "Production ultra large reduced graphene oxide sheets and its transparent conductive thin film,", 5th international congress on nanoscience and nanotechnology, Oct 2014.

M. Poornajar, P. Marashi, D. Haghshenas, Mohammadreza Kolahdouz, "Hydrothermal Growth of ZnO nanorods with the addition of polyethyleneimine: effect of HMT/Zinc Nitrate molar ratio,", 2nd International Conference on Nanotechnology (ICN 2014), Jul 2014.

M. Poornajar, P. Marashi, Mohammadreza Kolahdooz, D. Haghshenas, "growth of ZnO nanorods by wet chemical bath deposition method with the addition of polyethyleneimine : effect of HMTA/ Zinc Nitrate molar ratio,", 2nd international conference on nanotechnology, Jul 2014.

Mohammad Khoramifar, P. Marashi, Majid Pouranvari, "Resistance spot welding of dissimilar AISI 430 ferritic and AISI 304 austenitic stainless steels: Failure mode and mechanical properties,", The 22nd Annual International Conference on Mechanical Engineering, ISME2014, Apr 2014.

A. Amirjani, Faezeh, P. Marashi, D. Haghshenas, "Agitation-based Shape Controlled Synthesize of Silver Nanocrystals,", 5th International Conference on Nanostructures (ICNS5), Mar 2014.

A. Amirjani, P. Marashi, Davoud Haghshenas, "High-Yield Synthesis of Uniform Silver Nanowires with High Aspect Ratio,", 4th International Conference on Ultrafine Grained and Nano-Structured Materials, Nov 2013.

A. Amirjani, P. Marashi, D. Haghshenas, "High-Yield Synthesis of Uniform Silver Nanowires with High Aspect Ratio,", 4th International Conference on Ultrafine Grained and Nano-Structured Materials, Nov 2013.

M.S. Hosseini, P. Marashi, Davoud Haghshenas, "Soft and facile synthesis and size control of Copper one dimensional nanostructures using polyol method,", 4th International Conference on Ultrafine Grained and Nano-Structured Materials, Nov 2013.

A. Rashvand, P. Marashi, "Investigation of microstructure and hardness of AZ31/TiB2 surface composite produced by Friction Stir Processing (FSP),", 4th International Conference on Materials Heat Treatment (ICMH) and 2nd International Congress on New and Advanced Materials (NAMIC), Aug 2013.

N.S. Ayati, E. Akbari, P. Marashi, "Influence of precipitation voltage on zinc nanowires growth in electrochemical route,", 1st National Congress and Workshop on Nanoscience and Nanotechnology, May 2013.

A. Rashvand, M. Navazani, P. Marashi, "Effect of Heat Input (w/v) on Mechanical Properties of AZ31 Magnesium Alloy in Friction Stir Processing,", 13th National Conference of Welding & Inspection And 2th National Conference Non Destructive Testing, Dec 2012.

A. Nikkhoo, P. Marashi, Majid Pouranvari, M. Alizadeh Shamsabadi, "The impact of welding current on the structure and mechanical properties of resistance spot welding of AISI 430 ferritic stainless steel,", ّirst joint conference of the Sixth International Conference of Iranian Metallurgical Engineers Society, Nov 2012.

F. Ejehei, P. Marashi, H. Sarkheil, M.R. Ghaani, A. Nekahi, "Synthesis of a New NASICON Structure by Pechini-Type Sol-Gel Method,", 4th International Conference on Nanostructures (ICNS4), Mar 2012.

S. Montazeri Namin, P. Marashi, S. Saramad, A. Nekahi, "PIEZOELECTRIC PROPERTIES OF ZNO NANOWIRE ARRAYS GROWN IN ORDERED ANODIC ALUMINUM OXIDE TEMPLATE,", 3rd International Conference on Ultrafine Grained and Nanostructured Materials, Nov 2011.

M. Arab, P. Marashi, Saeedeh Yoonesian, S. Saramad, "INFLUENCE OF LONG-TERM AND SHORT-TERM STRIPPING ON THE FINAL NANOPORES ARRANGEMENT BY TOW-STEP ANODIZING,", International Congress on Nanoscience and Nanotechnology, Nov 2010.

M. Salari, M. Abbaci, Yadollah Gahngkhanlou, Seyed Hamed Aboutalebi, P. Marashi, Alireza Zolfaghari Hesari, "Microstructural Evaluation of Mechanochemially Synthesized Nanocrystalline TiO 2 Powder via Rietveld Refinement Method,", International Conference on Nanotechnology: Fundamentals and Applications, Aug 2010.

D. Safanama, Alireza Zolfaghari Hesari, Seyed Hamed Aboutalebi, P. Marashi, Somayeh Jalilzadeh, "Distant Dependent Measurement of Elastic Modulus of Polymer Nanocomposite Fibers via Atomic Force Spectroscopy,", International Conference on Nanotechnology: Fundamentals and Applications, Aug 2010.

T. Shadloo, P. Marashi, Alireza Zolfaghari Hesari, M. Rezaee, Somayeh Jalilzadeh, "Adhesion Forces on Polymer Hybrid Materials by Distant Dependant Measurement,", INTERNATIONAL CONFERENCE ON NANOTECHNOLOGY: FUNDAMENTALS AND APPLICATIONS,, Aug 2010.

P. Marashi, S. Saramad, "The Arrangement of Alumina Nanopores Formed in Various Stripping Durations,", Conference on Nanostructures, Mar 2010.

Majid Pouranvari, P. Marashi, Zahed Salimi, "R09167-EFFECT OF PROCESS PARAMETERS ON MECHINICAL PERFORMANCE OF LOW CARBON STEEL RESISTANCE SPOT WELDS,", 2nd international Conference on Recent Advances in Material Processing Technology, Jan 2010.

Majid Pouranvari, P. Marashi, A. Tavassolizadeh, "R09169- MECHANICAL PROPERTIES OF THREE THICKNESS RESISTANCE SPOT WELDS FOR LOW CARBON STEEL,", 2nd international Conference on Recent Advances in Material Processing Technology, Jan 2010.

Majid Pouranvari, P. Marashi, "R09168- QUASI-STATIC FAILURE MODE OF DP980 RESISTANCE SPOT WELDS,", 2nd international Conference on Recent Advances in Material Processing Technology, Jan 2010.

Bahram Shayegh, Majid Pouranvari, P. Marashi, "R09165- EFFECT OF MARTENSITE VOLUM FRACTION ON TENSILE PROPERTIES OF DUAL PHASE STEELS,", 2nd international Conference on Recent Advances in Material Processing Technology, Jan 2010.

M. Salehi, P. Marashi, "Investigating the effects of temperature and pH on the magnetic properties of FexCo1-x nanowires synthesized in porous anodized alumina template by surface response,", 3rd Joint Conference of Iran Metallurgical Engineers and Casting Scientific Society, Nov 2009.

S. Firoozi, P. Marashi, "Determination of the Adhesion Properties of Mica via Atomic Force Spectroscopy,", 2nd International Conference on Ultrafine Grained and Nanostructured Materials, Nov 2009.

Majid Pouranvari, Seyed Mostafa Mousavizadeh, P. Marashi, Masoud Goodarzi, Masoud Ghorbani, "Effect of failure on the mechanical properties of dissimilar resistance spot welds between DP600 and St14 Steels,", IIW International Congress on Welding and Joining, Nov 2009.

M. Masoumi, P. Marashi, Majid Pouranvari, Jamshid Sabbaghzadeh, Mohammad Javad Torkamany, "Assessment of the effect of laser spot welding parameters on the joint quality using Taguchi method,", 18th International Metallurgical & Materials Conference, METAL 2009, May 2009.

P. Marashi, "effect of temperature and pressure of squeeze casting on porosity and density of AA2024 alloy,", Apr 2009.

M. Salehi, P. Marashi, Majid Pouranvari, Masoud Goodarzi, "Structure and failure behavior of resistance spot welding of similar thickness, low carbon steel sheets,", Steel Syposium 87, Mar 2009.

, M.H. Rahimi, S. Tabaian, P. Marashi, "The effect of aluminum electropolishing on nano pores arrangement in AAMs,", International Conference on Ultrafine Grained and Nanostructured Materials, Nov 2008.

M. Arab, P. Marashi, "The effect of oxalic acid concentration and stripping time on noanopore ordering in anodic alumina,", 2nd International Nano Science and Nano Technology Congress, Oct 2008.

G. Heidari, S. Musavi Khoei, A. Hasanzadeh, P. Marashi, H. Keshmiri, A. Shahhosseini, "Investigation of zinc thermal diffused coatings by solid state diffusion method,", Materials Science and Technology 2008, Oct 2008.

Seyyed Ali Azimifar, Atena Mirhashemi, S. Musavi Khoei, P. Marashi, "Effect of surface severe plastic deformation (S. S. P. D.) time on surface properties of AISI304 austenitic stainless and ST12 steels,", 9th Surface Engineering and Heat Treatment Seminar, May 2008.

M. Pouran-vary, P. Marashi, "Failure behavior of low carbon steel resisyance spot welds under tensile shear and coach peel static loading condition,", May 2008.

Majid Pouranvari, P. Marashi, Masoud Goodarzi, "Failure mode of resistance spot welds during tensile-shear test: interfacial versus pullout,", 16 th. Annual (International) Conference on Mechanical Engineering-ISME2008, May 2008.

Seyyed Ali Azimifar, A. Mirhashemi Rooteh, S. Musavi Khoei, P. Marashi, "Kinetic and thermodynamic investigation of nitriding of nanocrystals produced by surface severe plastic deformation (S. S. P. D.),", 9th Surface Engineering and Heat Treatment Seminar, May 2008.

S. Musavi Khoei, Seyyed Ali Azimifar, Atena Mirhashemi, P. Marashi, "Comparing diffusion in nanocrystalls produced by surface severe plastic deformation (S. S. P. D.) and conventional coarse grains,", 9th Surface Engineering and Heat Treatment Seminar, May 2008.

M. Pouran-vary, P. Marashi, "An analytical model predicting failure mode of resistance spot welds,", May 2008.

M. Pouran-vary, P. Marashi, "Failure mode of dissimilar resistance spot welds between austenitic stainless and low carbon steels,", May 2008.

Atena Mirhashemi, Seyyed Ali Azimifar, S. Musavi Khoei, P. Marashi, "Creating nanocrystalline surface layer by surface severe plastic deformation (S. S. P. D.),", 9th Surface Engineering and Heat Treatment Seminar, May 2008.

P. Marashi, "The effect of asid concentration on nano a alumina particle size in sol gel method,", Iran Zeolite International Conference, Apr 2008.

M. Salari, M. Rezaee, S. Musavi Khoei, P. Marashi, "Effect on NaCl/TiOSO4 ratio on mechanochemical synthesis of TiO2 nanoparticles,", Mar 2008.

M.H. Rahimi, S. Tabaian, P. Marashi, "Effect of oxide removing time between anodizing steps on final ordering of AAO,", 3rd Nanotechnology Student Conference, Feb 2008.

S.A. Azimifar, S. Musavi Khoei, P. Marashi, "Effect of nanocrystal layer produced by surface severe plastic deformation (S. S. P. D.) on liquid nitriding and the properties of nitride layer,", 3rd Nanotechnology Student Conference, Feb 2008.

N. Asadpoor Chalo, P. Marashi, "Measuring particle size and particle size distribution by x-ray diffraction methods for nanocrystalline alumina powders,", Nov 2007.

N. Asadpoor Chalo, P. Marashi, "Particle size and size distribution determined by x-ray diffraction in nanocrystalline alumina powders,", Nov 2007.

, S. Tabaian, P. Marashi, S. Saramad, "The effect of aluminum electropolishing on nano-pores arrangement in Anodic Alumina Membranes,", International Conference on Ultrafine Grained and Nanostructured Materials, Nov 2007.

, , P. Marashi, "Effect of annealing on single layer cocrpt Al2O3 nanostructured materials,", Nov 2007.

, H. Zolfaghari, , P. Marashi, "Study of titanium oxide nanolayer as photoelectrochemical catalyst,", Nov 2007.

S. Musavi Khoei, P. Marashi, "Effect of Milling Time on Mechanochemical Synthesis of TiO2 Nanoparticles,", Nov 2007.

, P. Marashi, "Study of Titanium Oxide Nanolayer as Photoelectrochemical Catalyst,", Dec 2006.

, P. Marashi, "Effect o annealing on single layer CoCrPr Al2O3 nanostructured materials,", Dec 2006.

, , , P. Marashi, "Fabrication of ordered nonporous alumina and its characterization by atomic force microscope (AFM),", Sep 2005.

, P. Marashi, "Study of ultrasonic effect on self-assembled nano arrays of anodic aluminum oxide by atomic force microscope,", May 2005.

Taught Courses

Course title

Description

Headlines

Date

Adv. Method of Materials Analysis Lab.

Developing the ability to interpret and analyze elemental analysis and X-ray analysis data, familiarize with software related to X-ray diffraction, and quantitative evaluation of microscopic images

4051

Materials Characterization and Analysis Techniques

Introducing New Analysis Methods, describing different concepts in analyzing, possible analyzing methods and their applications in research and industries

4051

Adv. Methods of Materials Analysis

Describing advanced methods of materials analysis, especially those that have more applications in research projects

4051

Lab of Advanced Methods of Materials Analysis

ایجاد توانایی تجریه و تحلیل داده های آنالیزهای عنصری و آنالیزهای مبتنی بر اشعه ایکس، آشنایی با نرم افزارهای مرتبط با پراش اشعه ایکس و ارز�

4042

Materials Characterization and Analysis Techniques

4042

Advanced Methods of Materials Analysis

4042

Crystallography

آشنایی با انواع ساختارهای مواد بلوری و خواص آنها و روشهای شناسایی ساختارهای بلوری، با توجه به مباحثی که برای فراگرفتن مطالب دروس بعدی، مو

4042

Materials Characterization and Analysis Techniques

4041

Lab of Advanced Methods of Materials Analysis

4041

Advanced Methods of Materials Analysis

4041

Materials analysis and characterization methods

4041

crystallography

4032

Materials Characterization and Analysis Techniques

4032

Advanced Methods of Materials Analysis

4032

Lab of Advanced Methods of Materials Analysis

4032