Content
Pepole
CV
Email:
razfar
aut.ac.ir
aut.ac.irPhone:
h-index (Scopus):
29
Citations (Scopus):
2438
Supervised PhD Theses
#
Thesis title
By
Date
1
Experimental and Numerical Study of the Effect of 3D Printing Parameters with Biological Application on Printability and Accuracy Improvement
Ardeshir Hemasian Etefagh & Mohammad Reza Razfar
May 2024
2
The effect of process parameters on reducing stresses in turning Inconel 718 using experimental, and numerical methods
Sayed Mohamad Nikouei & Mohammad Reza Razfar
October 2022
3
Numerical and Experimental Study of Laser Micromachining of Glass under Magnetic Field
Naser Abbasi & Mohammad Reza Razfar
May 2022
Supervised MSc Theses
#
Thesis title
By
Date
1
Experimental and Numerical Study of Mechanical Strength Properties of Optimal Unit Cell Designed for Bone Implants Made by Selective Laser Melting
Mohammad Khorasani & Mohammad Reza Razfar
July 2024
2
Experimental and Numerical Study on the Effects of SLM Process Pparameters on the Mechanical Strength of Bone Implants
Nima Tabei & Mohammad Reza Razfar
March 2024
3
Application of Machine Learning Algorithm in Optimization of Metal Printing Parameters by Selective Laser Melting
Masoud Nezarati & Mohammad Reza Razfar
March 2024
4
Investigation of the effect of lattice architecture on the mechanical strength properties of parts fabricated by laser selective melting
Sajjad Asli & Mohammad Reza Razfar
March 2024
5
Investigating the effect of Scanning Strategy and Re-Melting on Residual Stresses in Printed Parts Fabricated by Selective Laser Melting (SLM)
Sina Qavipeykar & Mohammad Reza Razfar
June 2023
6
Experimental Study on Effect of Process Parameters on Porosity in Selective Laser Melting
Sajjad Rajabi & Mohammad Reza Razfar
May 2023
7
Fabrication of Functionally Graded Materials (FGM) via Selective Laser Melting (SLM) Technology
Masood Amirshami & Mohammad Reza Razfar
May 2023
8
Determination of percentage of hydrogel compounds and printing parameters in order to improve printability
Mahdie Khattati & Mohammad Reza Razfar
March 2023
9
Investigating the effect of post-processing on fatigue strength in metal 3D printed parts
Hossein Rangrizian & Mohammad Reza Razfar
March 2023
10
Design and Development of Pigmented layer of Skin equivalent structure with 3D Bioprinting Technology
Niusha Ghanbarnejad Daryani & Mohammad Reza Razfar
March 2023
11
Experimental Investigating on the effect of Applying Magnetic Field on Laser Cladding Process
Farid Abdolalizade & Mohammad Reza Razfar
October 2022
12
Experimental investigation of residual stresses,hardness and surface roughness during laser assisted ball burnishing
Alireza Khodabandeh & Mohammad Reza Razfar
June 2022
13
Experimental study on the effect of pulse current waveform on tool wear in electrochemical discharge drilling
Reza Zafarian & Mohammad Reza Razfar
June 2022
14
Experimental Investigation on the Effect of Machining Parameters on Electro-Chemical Corrosion Resistance of Machined Parts Produced by 1D Ultrasonic Assisted Turning
Faramarz Mehdikhani & Mohammad Reza Razfar
October 2021
15
Experimental Study on the effect of Hybrid Laser Ultrasonic Surface Hardening Process on AISI 4140 Fatigue Strength
Hossein Taheri & Mohammad Reza Razfar
September 2021
16
Fabrication and study of mechanical characterization of polycaprolactone based scaffold for dental applications by 3D bioprinting
Mohammadmahan Taghavifarahi & Mohammad Reza Razfar
September 2021
17
Bio-printing Software Development to Modify Printing Path for a 3D Bio-Printer
Masumeh Mansour & Mohammad Reza Razfar
July 2021
18
Experimental Investigation on the Effect of Residual Stresses and Surface Roughness induced by Roller Burnishing Process on Corrosion Resistances
Daniyal Sayadi & Mohammad Reza Razfar
July 2021
19
Analysis of tool deflection error and implementation a hydraulic mechanism for error compensation in machining
Nasser Malboobi & Mohammad Reza Razfar
June 2021
20
Experimental study on the effect of ultrasonic vibration on tool wear in electrochemical discharge drilling
Mohammad Bagheri & Mohammad Reza Razfar
June 2021
21
Experimental investigation and finite element simulation of heat distribution in laser assisted grinding
Mohsen Nadi & Mohammad Reza Razfar
September 2020
22
Experimental Study and Finite Element Simulation of Residual Stress in Laser Assisted Turning
Aref Bakhtiari Renani & Mohammad Reza Razfar
September 2020
23
Experimental investigation of vibrational parameters effect on Ultrasonic Assisted Laser Drilling
Soheil Amiri & Mohammad Reza Razfar
February 2020
24
Experimental Study and Finite Element Simulation of Cutting Force and Temperature in Laser Assisted Milling
Akhtar Haji Esmaeilzadeh & Mohammad Reza Razfar
February 2020
25
Experimental investigation and Theoretical modeling of tool mean temperature during ultrasonic elliptical vibration turning
Mahdi Ghaderi & Mohammad Reza Razfar
February 2019
26
Experimental investigation of cutting forcese and surface roughness during ultrasonic elliptical and Plasma assisted turning
Mohammad Reza Beyki Sarveolya & Mohammad Reza Razfar
February 2019
27
Experimental investigation of cutting tool flank wear in ultrasonic elliptical assisted turning
Omid Boostanipour & Mohammad Reza Razfar
February 2019
28
Experimental study on the effect of magnetic field on the electrochemical discharge drilling of ceramic material
Tahoura Sharifinia & Mohammad Reza Razfar
October 2018
29
Experimental investigation and finite element simulation of residual stresses during ultrasonic assisted turning
Majid Karimi Rizi & Mohammad Reza Razfar
February 2018
30
Experimental investigation and finite element simulation of residual stresses during ultrasonic and Plasma assisted turning
Behnam Mehrabi & Mohammad Reza Razfar
February 2018
31
Experimental Study and Finite Element Simulation of Residual Stress in Heat Assisted Turning
Sepideh Amirhoseini & Mohammad Reza Razfar
February 2018
32
Experimental investigation and finite element simulation of heat distribution in heat assisted turning
Ehsan Feyzabadi & Mohammad Reza Razfar
February 2018
33
Experimental Investigation of Electro Chemical Discharge Turning Parameters on Dimensional Accuracy and Surface Quality in Groove Turning of a Glass Bar
Hootan Najafian & Mohammad Reza Razfar
October 2017
34
Experimental investigation and optimization of miniature – cutting of glass using electrochemical discharge wire cutting machining
Sasan Jahangirzadeh Bigdiloo & Mohammad Reza Razfar
October 2016
35
Experimental investigation and optimization of tool parameters affecting surface roughness and slit on the glass by wire electrochemical discharge machining
Ardeshir Hemasian Etefagh & Mohammad Reza Razfar
October 2016
36
Experimental investigation on the single-pass and multi-pass microdrlling in electrochemical discharge machining process on the glass
Pargol Rezvani Hamedani & Mohammad Reza Razfar
October 2016
37
Investigation of effecting electrochemical parameters on the surface quality and material removal rate of
Nasim Sabahi & Mohammad Reza Razfar
February 2016
38
Investigation of the effect of tool parameters on miniature channel quality and glass removal rate by electrodischarge machining method
Pouya Mohamadi Ahari & Mohammad Reza Razfar
February 2016
39
Experimental Investigation of tool wear, surface Roughness and cutting force during hard turning process of hardened steel using TiO2 nano Fluids
Javad Moradpour & Mohammad Reza Razfar
January 2016
40
Optimization of machining parameters in milling and drilling of nanocomposites
Milad Moradian & Mohammad Reza Razfar
October 2015
41
Cutting of tungsten carbide by CBN tools
Abdolmohammad Hajiesfandiari & Mohammad Reza Razfar
August 2015
42
Study of Effects of the Tool Parameters in Micro-Machining of Glass Using Electrochemical Discharge Machining
Ali Heidari & Mohammad Reza Razfar
February 2015
43
Eperimental Investigation and Optimization of Micro-Drilling of Ceramics Using Electrochemical Discharge Machining
Majid Kavousi & Mohammad Reza Razfar
February 2015
44
Feature Recognition and Tolerance Chart Analysis of Turning Parts Using STEP Format
Ali Reza Ghahri & Mohammad Reza Razfar
July 2014
45
Numerical and Experimental Study of Temperature Distribution in Continuous and Interrupted Machining
Naser Abbasi & Mohammad Reza Razfar
February 2014
46
Experimental and Finite Element Study of Ultrasonic Aided Continuous Machining
& Mohammad Reza Razfar
February 2014
47
Optimization of cutting parameters in cryogenic turning of steel
Salman Khani & Mohammad Reza Razfar
September 2013
48
Experimental investigation of Milling of steel using Ultrasonic and High Temperature-Aided Machining (UHTAM)
Sadegh Elhami Joosheghan & Mohammad Reza Razfar
January 2013
49
Experimental and Theoretical Study Of Frictional Model For Different Tool Materials
& Mohammad Reza Razfar
November 2012
50
Investigating the Effect of Friction stir process Operation on the Machining Forces and Surface Roughness in machining
Yaser Rasti Kouche & Mohammad Reza Razfar
May 2012
51
Investigation of Tool Life in Ultrasonically Assisted Milling
& Mohammad Reza Razfar
January 2012
52
Optimization of Datum Selection and Machining Tolerance Allocation for Cylindrical Parts Using 2D Tolerance Chart
Razegheh Malakalaei & Mohammad Reza Razfar
January 2012
53
Optimization of cutting parameter for machining of stainless steel
& Mohammad Reza Razfar
October 2011
54
Experimental and statistical investigation of friction model in machining
Amir Mehdi Ahadi & Mohammad Reza Razfar
September 2011
55
An Experimental and Numerical Investigation of Temperature Rise in Milling
Behrouz Mohammad Pour & Mohammad Reza Razfar
February 2011
56
An experimental investigation on ultrasonic-assisted drilling for high alloyed steels
Bijan Vakili Azghandi & Mohammad Reza Razfar
September 2010
57
Optimization of turning parameters via Harmony Search and Genetic Algorithm and Taguchi method
Reza Farshbaf Zinati & Mohammad Reza Razfar
September 2010
58
Computerization of 2D Tolerance Chart for Cylinderical Parts
Mohsen Khajehzadeh & Mohammad Reza Razfar
September 2009
59
Fabrication of an angle measurement sensor
Nima Sayyaf Dezfooli & Mohammad Reza Razfar
September 2009
60
Integrating process planning and scheduling in a job shop environment for rotary parts
Masoud Farahnakian & Mohammad Reza Razfar
September 2009
61
An experimental investigation of ultrasonic vibrations effects on surface roughness and cutting forces in milling
Parviz Sarvi Hampa & Mohammad Reza Razfar
May 2009
62
Study of the cutting conditions on residual stresses in the orthogonal cutting
Mohammad Mohammadpour & Mohammad Reza Razfar
March 2009
63
Integrating process planning and scheduling in a job shop environment for prismabic parts
Mohammad Haddadzade Bahabadi & Mohammad Reza Razfar
January 2009
64
Experimental investigation and modification of milling parameters in composite materials
Seyedmohammadreza Zanjanizadeh Esfehani & Mohammad Reza Razfar
November 2008
65
RECONSTRUCTION OF ACOUSTIC EMISSION WAVES CAUSED BY LEAKAGE
Amir Ahmadi & Mohammad Reza Razfar
September 2008
66
Determination of the optimized machining parameters by using GONNS
Mahdiyar Haghshenas Astarabadi & Mohammad Reza Razfar
May 2008
67
ACOUSTIC EMISSION APPLICATION FOR TOOL WEAR MONITORING IN FACE MILLING
Hamed Sadeghinia & Mohammad Reza Razfar
March 2008
68
CONTROL OF TENSILE MODULUS IN INJECTION MOLDING BY NEURAL NETWORK
Hamed Vaeez & Mohammad Reza Razfar
February 2007
69
PREDICTION OF SHRINKAGE & WARPAGE IN INJECTION - MOLDED PARTS USING NEURAL NETWORKS
Hamid Farrokhi & Mohammad Reza Razfar
February 2007
70
INSPECTION OF TOOL TEMPERATURE FIELD IN ORTHOGONAL MACHINING BY FINITE ELEMENT METHOD
Ali Fata & Mohammad Reza Razfar
February 2007
71
analysis of tool deflection and correlated errors in end milling
Reza Jalili Safar & Mohammad Reza Razfar
January 2007
72
EXPERIMENTAL STUDY OF DRILLING REINFORCED PLASTICS AND INVESTIGATION OF DAMAGE ZONE BY NDT METHODS
Peyman Moradi & Mohammad Reza Razfar
May 2006
Books
#
Title
Author(s)
Publisher country
publication date
version
Portal Records
1
Tooling systems and Advanced
Mohammad Reza Razfar, Sadegh Elhami Joosheghan
Iran (Islamic Republic of)
October 2020
1
2
Fundamentals of Machining and Machine Tools
Mohammad Reza Razfar, Mohsen Khajehzadeh
Iran (Islamic Republic of)
November 2020
1
3
process planing for machining parts
Mohammad Reza Razfar, Mohsen Khajehzadeh, Masoud Farahnakian
Iran (Islamic Republic of)
June 2011
1
4
process planing for machining parts
Mohammad Reza Razfar, Mohsen Khajehzadeh, Masoud Farahnakian
Iran (Islamic Republic of)
December 2013
2
Journal Papers
Portal Records
1
Daniyal Sayadi, Hossein Rangrizian, Alireza Khodabandeh, Mohammadreza Khosrojerdi, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Improving fatigue behavior of selective laser melted 316 L stainless steel by ultrasonic-assisted burnishing", Rapid Prototyping Journal, August 2024
Vol. 0,
Num. 0,
Page 1-34,
August 2024,
2
Sajjad Rajabi, Alireza Khodabandeh, Mohamad Sina Sadeghi, Masood Amirshami, Ardeshir Hemasian Etefagh, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Efficient utilization of remelt strategy for improving relative density and surface integrity to eliminate necessity of performing post-processing of additively manufactured 316L stainless steel", PROGRESS IN ADDITIVE MANUFACTURING, May 2024
Vol. 0,
Num. 0,
Page 1-18,
May 2024,
3
Alireza Khodabandeh, Daniyal Sayadi, Sajjad Rajabi, Mohammadreza Khosrojerdi, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Surface integrity and fatigue behavior of AISI 4340 steel after hybrid laser-ultrasonic assisted ball burnishing process", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, February 2024
Vol. 0,
Num. 0,
Page 1-20,
February 2024,
4
Daniyal Sayadi, Hossein Rangrizian, Alireza Khodabandeh, Masoud Nezarati, Ardeshir Hemasian Etefagh, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Using shot peening and burnishing to improve fatigue performance of additively manufactured 316L stainless steel", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, August 2023
Vol. 0,
Num. 0,
Page 1-16,
August 2023,
5
Daniyal Sayadi, Faramarz Mehdikhani, Mohsen Khajehzadeh, Mohammadreza Khosrojerdi, Mohammad Reza Razfar, "Corrosion resistance improvement of 6061 aluminum alloy by 2D ultrasonic vibrations assisted turning", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, June 2023
Vol. 0,
Num. 0,
Page 1-12,
June 2023,
6
Daniyal Sayadi, Mohammad Bagheri, Mohammadreza Khosrojerdi, Mohsen Khajehzadeh, Mohammad Reza Razfar, "2D Ultrasonic-Assisted Burnishing to Control Surface Integrity and Electrochemical Behavior of AA7075-T6 Aluminum Alloys", JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, June 2023
Vol. 0,
Num. 0,
Page 1-13,
June 2023,
7
Daniyal Sayadi, Mohammad Bagheri, Mohammadreza Khosrojerdi, Mohsen Khajehzadeh, Mohammad Reza Razfar, "The influence of vibration amplitude on AA7075-T6 corrosion resistance improvement during ultrasonic-assisted burnishing", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, April 2023
Vol. 0,
Num. 0,
Page 1-19,
April 2023,
8
Yahya Choopani, Mohsen Khajehzadeh, Mohammad Reza Razfar, "An experimental study on the abrasive flow machining of aluminum
alloy (AA 2024)", SN Applied Sciences, April 2023
Vol. 0,
Num. 0,
Page 1-12,
April 2023,
9
Mohsen Nadi, Akhtar Haji Esmaeilzadeh, Omid Rohani Raftar, Mohsen Khajehzadeh, Mohammad Reza Razfar, "An experimental study on the creep feed grinding of laser macro-structured alumina considering constant material removal volume", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, February 2023
Vol. 0,
Num. 0,
Page 1-13,
February 2023,
10
Nasser Malboobi, Mohammad Reza Razfar, Rasul Fesharakifard, "The Analysis of Tool Deflection Error and Hydraulic Mechanism for Its Compensation in Machining", Modares Mechanical Engineering, December 2022
Vol. 23,
Num. 1,
Page 57-66,
December 2022,
11
Mohammadreza Khosrojerdi, Mohammad Reza Razfar, Rasul Fesharakifard, Mohsen Khajehzadeh, "Improvement of the frictional behavior of Al 7075-T6 by ultrasonic-assisted ball burnishing process", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, December 2022
Vol. 0,
Num. 0,
Page 1-11,
December 2022,
12
Mohammad Bagheri, Daniyal Sayadi, Ardeshir Hemasian Etefagh, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Drilling of Al2O3 ceramic using ultrasonic assisted electrochemical discharge machining process", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, November 2022
Vol. 0,
Num. 0,
Page 1-16,
November 2022,
13
Seyyed Sajjad Ahmadpoor, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Finite element simulation and experimental investigation of machining induced residual stresses in ultrasonic elliptical vibration-assisted turning", MACHINING SCIENCE AND TECHNOLOGY, October 2022
Vol. 26,
Num. 3,
Page 1-19,
October 2022,
14
Sayed Mohamad Nikouei, Mohammad Reza Razfar, Mohsen Khajehzadeh, "Experimental Study and Finite Element Simulation of Cutting Tool Temperature in Laser Assisted Machining", , September 2022
Vol. 54,
Num. 6,
Page 1-15,
September 2022,
15
Yahya Choopani, Mohammad Reza Razfar, Mohsen Khajehzadeh, Mohammadreza Khosrojerdi, "Design and development of ultrasonic assisted-rotational magnetorheological abrasive flow finishing (UA-RMRAFF) process", APPLIED ACOUSTICS, July 2022
Vol. 197,
Num. 0,
Page 1-21,
July 2022,
16
Yahya Choopani, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Experimental investigations into the nano-finishing of Al2024 tubes using the rotational-magnetorheological abrasive flow finishing (R-MRAFF) process", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, April 2022
Vol. 0,
Num. 0,
Page 1-13,
April 2022,
17
Moosa Arsalani, Mohammad Reza Razfar, Amir Abdullah, Mohsen Khajehzadeh, "Experimental Study of the Effect of Initial Surface Roughness on Ball Burnishing Forces and Endurance Limit of AISI 4130 Hardened Steel", , February 2022
Vol. 53,
Num. 12,
Page 5627-5644,
February 2022,
18
Naser Abbasi, Mohammad Reza Razfar, S.Mehdi Rezaei, Khosro Madanipour, Mohsen Khajehzadeh, "Investigation of laser induced plasma assisted ablation of glass in presence of magnetic field", AUT Journal of Mechanical Engineering, January 2022
Vol. 0,
Num. 0,
Page 1-23,
January 2022,
19
Sayed Mohamad Nikouei, Mohammad Reza Razfar, Mohsen Khajehzadeh, "Influence of nanoparticles’ size on Inconel 718 machining induced residual stresses", MATERIALS AND MANUFACTURING PROCESSES, December 2021
Vol. 0,
Num. 0,
Page 1-10,
December 2021,
20
Naser Abbasi, Mohammad Reza Razfar, S.Mehdi Rezaei, Khosro Madanipour, Mohsen Khajehzadeh, "Experimental investigation of deep-hole micro-drilling of glass using LIPAA process", MATERIALS AND MANUFACTURING PROCESSES, November 2021
Vol. 0,
Num. 0,
Page 1-11,
November 2021,
21
Yahya Choopani, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Novel polishing media based on fiber for finishing hip joint implants", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, September 2021
Vol. 0,
Num. 0,
Page 1-17,
September 2021,
22
Moosa Arsalani, Mohammad Reza Razfar, Amir Abdullah, Mohsen Khajehzadeh, "Experimental Study of the Effect of Initial Surface Roughness on Ball Burnishing Forces and Endurance Limit of AISI 4130 Hardened Steel", AUT Journal of Mechanical Engineering, August 2021
Vol. 0,
Num. 0,
Page 1-14,
August 2021,
23
Omid Rohani Raftar, Soheil Amiri, Mohsen Khajehzadeh, Mohammad Reza Razfar, "The influence of ultrasonic vibration amplitude and magnetic field intensity on microstructural characteristics in laser drilling of Ti6Al4V", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, July 2021
Vol. 0,
Num. 0,
Page 1-17,
July 2021,
24
Yahya Choopani, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Development of fiber flow finishing (FFF) process for polishing hip prostheses", Journal of Manufacturing Processess, July 2021
Vol. 68,
Num. 0,
Page 1245-1260,
July 2021,
25
Salman Khani , Hamidreza Shahabi Haghighi, Mohammad Reza Razfar, Masoud Farshnakian, "Improvement of thread turning process using micro-hole textured solid-lubricant embedded tools", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, May 2021
Vol. 235,
Num. 0,
Page 0-0,
May 2021,
26
Salman Khani , Hamidreza Shahabi Haghighi, Mohammad Reza Razfar, Masoud Farahnakian, "Optimization of dimensional accuracy in threading process using Solid-lubricant embedded textured tools", MATERIALS AND MANUFACTURING PROCESSES, May 2021
Vol. 0,
Num. 0,
Page 0-0,
May 2021,
27
Omid Rohani Raftar, Mahdi Kaveh, Mohsen Khajehzadeh, Abdolreza Rahimi, Mohammad Reza Razfar, "Nano-lubricant influence on surface residual stresses in hard milling", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, March 2021
Vol. 0,
Num. 0,
Page 1-12,
March 2021,
28
S.M.M. Zamani, K. Behdinan, Mohammad Reza Razfar, Davoud Haghshenas, Jamshid Aghazadeh Mohandesi, "studying the effects of process parameters on the mechanical properties in friction stir welding of Al-SiC composite sheets", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, March 2021
Vol. 113,
Num. 113,
Page 3629-3641,
March 2021,
29
Yahya Choopani, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Optimal parameters of abrasive flow finishing for hip joint implants", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, February 2021
Vol. 0,
Num. 0,
Page 1-14,
February 2021,
30
Mohsen Khajehzadeh, Seyyed Sajjad Ahmadpoor, Omid Rohani Raftar, Mohammad Reza Beyki Sarveolya, Mohammad Reza Razfar, "Process parameters influence on cutting force and surface roughness during hybrid laser- and ultrasonic elliptical vibration-assisted machining", JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, January 2021
Vol. 0,
Num. 0,
Page 1-17,
January 2021,
31
Arsalan Torabi, Mohammad Reza Razfar, "The capability of ECDM in creating effective microchannel on the PDMS", PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, November 2020
Vol. 68,
Num. 0,
Page 10-19,
November 2020,
32
Arsalan Torabi, Mohammad Reza Razfar, "Improvement of Surface Integrity of PDMS Micro-channel in the Micro Electrochemical Discharge Milling Process", Modares Mechanical Engineering, November 2020
Vol. 20,
Num. 11,
Page 2605-2615,
November 2020,
33
Yahya Choopani, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Using inverse replica fixture technique for improving nano-finishing of hip joint implant in abrasive flow finishing process", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, September 2020
Vol. 0,
Num. 0,
Page 1-16,
September 2020,
34
Soheil Amiri, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Magnetic field and ultrasonic aided laser drilling effect on Ti6Al4V microstructural characteristics", MATERIALS AND MANUFACTURING PROCESSES, August 2020
Vol. 0,
Num. 0,
Page 1-10,
August 2020,
35
Moosa Arsalani, Mohammad Reza Razfar, Amir Abdullah, Mohsen Khajehzadeh, "Fatigue behavior improvement of hardened parts using sequential hard turning, grinding, and ball burnishing operations", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, August 2020
Vol. 0,
Num. 0,
Page 1-13,
August 2020,
36
Mohsen Khajehzadeh, Mohammad Reza Razfar, "Process parameters influence on laser-assisted machining-induced residual stresses", MATERIALS AND MANUFACTURING PROCESSES, July 2020
Vol. 0,
Num. 0,
Page 1-10,
July 2020,
37
Mohsen Khajehzadeh, Omid Boostanipour, Soheil Amiri, Mohammad Reza Razfar, "The influence of ultrasonic elliptical vibration amplitude on cutting tool flank wear", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, June 2020
Vol. 0,
Num. 0,
Page 1-14,
June 2020,
38
Mohsen Khajehzadeh, Omid Boostanipour, Mohammad Reza Razfar, "Finite Element Simulation and Experimental investigation of Residual Stresses in Ultrasonic Assisted Turning", ULTRASONICS, June 2020
Vol. 108,
Num. 106208,
Page 0-0,
June 2020,
39
Mohsen Khajehzadeh, Mohammad Reza Razfar, "Experimental Study of Machining Residual Stresses in Plasma Assisted Turning Process", , May 2020
Vol. 0,
Num. 0,
Page 1-19,
May 2020,
40
Salman Khani , Mohammad Reza Razfar, Hamidreza Shahabi Haghighi, Masoud Farshnakian, "Optimization of microtextured tools parameters in thread turning process of
aluminum 7075 aerospace alloy", MATERIALS AND MANUFACTURING PROCESSES, May 2020
Vol. 35,
Num. 12,
Page 1330-1338,
May 2020,
41
Reza Farshbaf Zinati, Mohammad Reza Razfar, "Multi-objective Constrained Optimization of Turning Process via Modified Harmony Search Algorithm", Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, June 2019
Vol. 43,
Num. 2,
Page 375-382,
June 2019,
42
Yahya Choopani, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Optimization of parameters affecting the magnetic abrasive finishing process using response surface method", , April 2019
Vol. 0,
Num. 0,
Page 1-16,
April 2019,
43
Mohsen Khajehzadeh, Javad Moradpour, Mohammad Reza Razfar, "Influence of nanolubricant particles’ size on flank wear in hard turning", MATERIALS AND MANUFACTURING PROCESSES, December 2018
Vol. 0,
Num. 0,
Page 1-8,
December 2018,
44
Mohsen Khajehzadeh, Javad Moradpour, Mohammad Reza Razfar, "Influence of nanofluids application on contact length during hard turning", MATERIALS AND MANUFACTURING PROCESSES, August 2018
Vol. 0,
Num. 0,
Page 1-9,
August 2018,
45
Naser Abbasi, Mohammad Reza Razfar, Mohsen Khajehzadeh, "Experimental Investigation and Finite difference modeling of cutting tool temperature distribution during ultrasonically assisted turning", , May 2018
Vol. 50,
Num. 3,
Page 657-670,
May 2018,
46
Nasim Sabahi, Mohammad Reza Razfar, "Investigating the effect of mixed alkaline electrolyte (NaOH + KOH) on the improvement of machining efficiency in 2D electrochemical discharge machining (ECDM)", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, October 2017
Vol. 0,
Num. 0,
Page 1-15,
October 2017,
47
Nasim Sabahi, Mohammad Reza Razfar, Mansour Hajian, "Experimental investigation of surfactant-mixed electrolyte into electrochemical discharge machining (ECDM) process", JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, July 2017
Vol. 250,
Num. 0,
Page 190-202,
July 2017,
48
Sadegh Elhami Joosheghan, Mohammad Reza Razfar, "Effect of ultrasonic vibration on the single discharge of electrochemical discharge machining", MATERIALS AND MANUFACTURING PROCESSES, June 2017
Vol. 0,
Num. 0,
Page 1-8,
June 2017,
49
Sadegh Elhami Joosheghan, Mohammad Reza Razfar, "Study of the current signal and material removal during ultrasonic-assisted electrochemical discharge machining", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, March 2017
Vol. 0,
Num. 0,
Page 1-9,
March 2017,
50
Sadegh Elhami Joosheghan, Mohammad Reza Razfar, "Analytical and experimental study on the integration of ultrasonically vibrated tool into the micro electro-chemical discharge drilling", PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, September 2016
Vol. 47,
Num. 0,
Page 424-433,
September 2016,
51
Masoud Farahnakian, Sadegh Elhami Joosheghan, Hossein Daneshpajooh, Mohammad Reza Razfar, "Mechanistic modeling of cutting forces and tool flank wear in the thermally enhanced turning of hardened steel", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, June 2016
Vol. 0,
Num. 0,
Page 1-15,
June 2016,
52
Masoud Farahnakian, Seyed Mohammad Ebrahim Keshavarz, Sadegh Elhami Joosheghan, Mohammad Reza Razfar, "Effect of cutting edge modification on the tool flank wear in ultrasonically assisted turning of hardened steel", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, April 2016
Vol. 0,
Num. 0,
Page 1-12,
April 2016,
53
Mansour Hajian, Mohammad Reza Razfar, Saeed Movahed, "An experimental study on the effect of magnetic field orientations and electrolyte concentrations on ECDM milling performance of glass", PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, March 2016
Vol. 45,
Num. 0,
Page 322-331,
March 2016,
54
Nasim Sabahi, Mohammad Reza Razfar, Mansour Hajian, Pouya Mohamadi Ahari, "Investigating the effect of the electrolyte concentration and type of electrolyte on the surface quality and depth of micro-channels produced by electrochemical discharge machining (ECDM)", , November 2015
Vol. 15,
Num. 13,
Page 401-405,
November 2015,
55
Ardeshir Hemasian Etefagh, Mansour Hajian, Mohammad Reza Razfar, "Experimental investigation of continuous voltage and pulsed voltage into electrochemical discharge machining", , November 2015
Vol. 15,
Num. 13,
Page 397-400,
November 2015,
56
Pouya Mohamadi Ahari, Mohammad Reza Razfar, Mansour Hajian, Nasim Sabahi, "A study on the effect of tool travel speed and tool rotational speed on the surface quality and depth of micro-channels in electrochemical discharge machining", , November 2015
Vol. 15,
Num. 13,
Page 406-409,
November 2015,
57
Sadegh Elhami Joosheghan, Mohammad Reza Razfar, Masoud Farahnakian, "Analytical, numerical and experimental study of cutting force during thermally enhanced ultrasonic assisted milling of hardened AISI 4140", INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, September 2015
Vol. 103,
Num. 0,
Page 158-171,
September 2015,
58
Yahya Choopani, Mohammad Reza Razfar, Payam Saraean, Masoud Farahnakian, "Experimental investigation of external surface finishing of AISI 440C stainless steel cylinders using the magnetic abrasive finishing process", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, August 2015
Vol. 0,
Num. 0,
Page 1-11,
August 2015,
59
M.M Abootorabi Zarchi, Mohammad Reza Razfar, Amir Abdullah, "The Effect of Cutting Parameters and Vibration Amplitude on Cutting Forces in Vibration - Assisted Side Milling Process of A17022 Aluminum", , July 2015
Vol. 15,
Num. 5,
Page 392-396,
July 2015,
60
Ali Behroozfar, Mohammad Reza Razfar, "Experimental and Numerical Study of Material Removal in Electrochemical Discharge Machining (ECDM)", MATERIALS AND MANUFACTURING PROCESSES, June 2015
Vol. 0,
Num. 0,
Page 1-33,
June 2015,
61
Sadegh Elhami Joosheghan, Mohammad Reza Razfar, Masoud Farahnakian, "Experimental Study of Surface Roughness and Tool Flank Wear During Hybrid Milling", MATERIALS AND MANUFACTURING PROCESSES, May 2015
Vol. 0,
Num. 0,
Page 1-8,
May 2015,
62
Masoud Farahnakian, Mohammad Reza Razfar, Dr. Farid Reza Biglari, "Analytical and experimental modeling of cutting force in plasma assisted turning of hardened steel", , April 2015
Vol. 15,
Num. 1,
Page 108-116,
April 2015,
63
Mohsen Khajehzadeh, Mohammad Reza Razfar, "FEM and Experimental Investigation of Cutting Force During UAT Using Multicoated Inserts", MATERIALS AND MANUFACTURING PROCESSES, April 2015
Vol. 0,
Num. 0,
Page 1-10,
April 2015,
64
Mohammad Haddadzade Bahabadi, Mohammad Reza Razfar, Mohammad Hossein Fazel Zarandi, "Multipart setup planning through integration of process planning and scheduling", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, February 2015
Vol. 0,
Num. 0,
Page 1-17,
February 2015,
65
Mohammad Mahdi Abootorabi Zarchi, Mohammad Reza Razfar, Amir Abdullah, "Research on the importance of tool–workpiece separation in ultrasonic vibration–assisted milling", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, January 2015
Vol. 0,
Num. 0,
Page 1-8,
January 2015,
66
Ali Behroozfar, Mohammad Reza Razfar, "Experimental Study of the Tool Wear during the Electrochemical Discharge Machining (ECDM)", MATERIALS AND MANUFACTURING PROCESSES, January 2015
Vol. 0,
Num. 0,
Page 1-28,
January 2015,
67
Mohammad Mehdi Abootorabi Zarchi, Amir Abdullah, Mohammad Reza Razfar, "Modeling the cutting force in ultrasonic-vibration assisted milling and its
empirical study", , December 2014
Vol. 14,
Num. 9,
Page 10-16,
December 2014,
68
Reza Farshbaf Zinati, Mohammad Reza Razfar, "Experimental and modeling investigation of surface roughness in end-milling of polyamide 6/multi-walled carbon nano-tube composite", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, November 2014
Vol. 75,
Num. 5,
Page 979-989,
November 2014,
69
Salman Khani , Masoud Farahnakian, Mohammad Reza Razfar, "Experimental study on hybrid cryogenic and plasma enhanced turning of 17-4PH stainless steel", MATERIALS AND MANUFACTURING PROCESSES, November 2014
Vol. 0,
Num. 0,
Page 1-32,
November 2014,
70
Mohsen Khajehzadeh, Mohammad Reza Razfar, Mehdi Akhlaghi, "Experimental Investigation of Tool Temperature During
Ultrasonically Assisted Turning of Aerospace Aluminum", MATERIALS AND MANUFACTURING PROCESSES, October 2014
Vol. 29,
Num. 0,
Page 1453-1460,
October 2014,
71
Parviz Sarvi Hampa, Mohammad Reza Razfar, Massaud Malaki, Aziz Maleki, "The Role of Dry Aero-acoustical Lubrication and Material Softening in Ultrasonically Assisted Milling of Difficult-to-Cut AISI 304 Steels", TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, September 2014
Vol. 68,
Num. 1,
Page 43-49,
September 2014,
72
Mohsen Khajehzadeh, Mohammad Reza Razfar, "Theoretical modeling of tool mean temperature during ultrasonically assisted turning", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, September 2014
Vol. 0,
Num. 0,
Page 1-19,
September 2014,
73
Reza Farshbaf Zinati, Mohammad Reza Razfar, "Finite element simulation and experimental investigation of friction stir processing of Polyamide 6", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, September 2014
Vol. 0,
Num. 0,
Page 1-11,
September 2014,
74
Reza Farshbaf Zinati, Mohammad Reza Razfar, Hossein Nazokdast, "Surface Integrity Investigation for Milling PA 6/MWCNT", MATERIALS AND MANUFACTURING PROCESSES, September 2014
Vol. 30,
Num. 8,
Page 1035-1041,
September 2014,
75
Mohsen Khajehzadeh, Mehdi Akhlaghi, Mohammad Reza Razfar, "Finite element simulation and experimental investigation of tool temperature during ultrasonically assisted turning of aerospace aluminum using multicoated carbide inserts", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, August 2014
Vol. 73,
Num. 0,
Page 9-12,
August 2014,
76
Masoud Farahnakian, Mohammad Reza Razfar, Dr. Farid Reza Biglari, "Multi-constrained optimization in ultrasonic-assisted turning of hardened
steel by electromagnetism-like algorithm", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, July 2014
Vol. 0,
Num. 0,
Page 1-12,
July 2014,
77
Masoud Farahnakian, Mohammad Reza Razfar, "CONSTRAINED OPTIMIZATION OF PLASMA ENHANCED TURNING BY ELECTROMAGNETISM-LIKE ALGORITHM", Indian Journal of Scientific Research, June 2014
Vol. 1,
Num. 2,
Page 335-343,
June 2014,
78
Reza Farshbaf Zinati, Mohammad Reza Razfar, Hossein Nazokdast, "Numerical and experimental investigation of FSP of PA 6/MWCNT composite", JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, May 2014
Vol. 214,
Num. 0,
Page 2300-2315,
May 2014,
79
Mohammad Reza Razfar, Ali Behroozfar, Jun Ni, "Study of the effects of tool longitudinal oscillation on the machining speed of electrochemical discharge drilling of glass", PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, May 2014
Vol. 38,
Num. 0,
Page 885-892,
May 2014,
80
Masoud Farahnakian, Mohammad Reza Razfar, "Experimental Study on Hybrid Ultrasonic and Plasma Aided Turning of Hardened Steel AISI 4140", MATERIALS AND MANUFACTURING PROCESSES, April 2014
Vol. 29,
Num. 0,
Page 550-556,
April 2014,
81
M. M. Abotorabi, Amir Abdullah, Mohammad Reza Razfar, "Influence of vibration direction on cutting forces in ultrasonic assisted milling", , March 2014
Vol. 2,
Num. 4,
Page 15-23,
March 2014,
82
Ramezanali Mahdavinejad, Mohammad Khajeh-Afzali, Mohammad Reza Razfar, "Investigation of Machining Force and Heat Flux on Tool/workpiece Surface Area via Finite element Method in Turning Process", Aerospace Mechanics Journal, December 2013
Vol. 9,
Num. 3,
Page 77-85,
December 2013,
83
Mohsen Sadeghbeigi Olyaie, Mohammad Reza Razfar, Semyung Wang, "Reliability-based topology optimization design of a linear piezoelectric micromotor using an optimum finite element method", Proceedings of the Institution of Mechanical Engineerings,Part O:Journal of Risk and Reliability, November 2013
Vol. 227,
Num. 6,
Page 586-598,
November 2013,
84
Mohammad Haddadzade Bahabadi, Mohammad Reza Razfar, Mohammad Hossein Fazel Zarandi, "Integration of process planning and job shop scheduling
with stochastic processing time", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, November 2013
Vol. -,
Num. 0,
Page 0-0,
November 2013,
85
Reza Farshbaf Zinati, Mohammad Reza Razfar, "An investigation of the machinability of PA 6/nano-CaCO3 composite", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, October 2013
Vol. 68,
Num. 0,
Page 2489-2497,
October 2013,
86
, Mohammad Reza Razfar, Mohammad Mahdi Aboutorabi, "Effect of cutting speed on tool life in ultrasonic-assisted milling process", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, August 2013
Vol. 227,
Num. 8,
Page 1157-1164,
August 2013,
87
Mehdi Haghi, Reza Farshbaf Zinati, Mohammad Reza Razfar, "Experimental and Modeling Study of the Turning Process of PA 6/Nano Calcium Carbonate Composite", Journal of Composites, May 2013
Vol. 2013,
Num. 970954,
Page 1-7,
May 2013,
88
Mohsen Sadeghbeigi Olyaie, Mohammad Reza Razfar, "Numerical characterizations of a Piezoelectric Micromotor Using Topology Optimization Design", SMART STRUCTURES AND SYSTEMS, March 2013
Vol. 11,
Num. 3,
Page 241-259,
March 2013,
89
Mohamad Mahdi Abootorabi, Mohammad Reza Razfar, Amir Abdullah, "Influence of ultrasonic vibrations on side milling of AISI 420 stainless steel", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, June 2012
Vol. 0,
Num. 0,
Page 0-0,
June 2012,
90
Mohamad Mahdi Abootorabi, Mohammad Reza Razfar, Amir Abdullah, "Investigation of the Effect of Cutting Speed and Vibration Amplitude on Cutting Forces in Ultrasonic-Assisted Milling", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, February 2012
Vol. 0,
Num. 0,
Page 1-7,
February 2012,
91
Masoud Farahnakian, Mohammad Reza Razfar, Kourank Beheshti, "A hybrid electromagnetism-like algorithm for integration of process planning and capacitated lot-sizing problem", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, February 2012
Vol. 226,
Num. 2,
Page 326-338,
February 2012,
92
Mohsen Sadeghbeigi Olyaie, Mohammad Reza Razfar, Semyung Wang , Edward J. Kansa, "Topology Optimization of a Linear Piezoelectric Micromotor Using the Smoothed Finite Element Method", CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, December 2011
Vol. 82,
Num. 1,
Page 55-81,
December 2011,
93
, Mohammad Reza Razfar, "Setup Planning Automation of Turned Parts Based on STEP-NC Standard", International Journal of Mechanical and Industrial Engineering (IJMIE), November 2011
Vol. 1,
Num. 2,
Page 1-6,
November 2011,
94
Mohsen Sadeghbeigi Olyaie, Mohammad Reza Razfar, Edward J.Kansa, "Reliability Based Topology Optimization of a Linear Piezoelectric Micromotor Using the Cell- Based Smoothed Finite Element Method", CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, October 2011
Vol. 75,
Num. 1,
Page 43-88,
October 2011,
95
Mr Soleymani Yazdi, Mohammad Reza Razfar, Mohsen Asadnia, "Modelling of the thrust force of the drilling operation on PA6 nanoclay nanocomposites using particle swarm optimization", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, October 2011
Vol. 225,
Num. 10,
Page 1757-1771,
October 2011,
96
Bijan Vakili Azghandi, Mohammad Reza Razfar, "An Experimental Study on the Effects of Ultrasonic Assisted Drilling on Chip Characteristics and Tool Life", Advanced Materials Research (AMR), October 2011
Vol. 325,
Num. 0,
Page 351-356,
October 2011,
97
Mohsen Khajehzadeh, Mohammad Reza Razfar, Masoud Farahnakian, "Computerization of One Dimensional Tolerance Charting", , September 2011
Vol. 2,
Num. 5,
Page 22-28,
September 2011,
98
Mohammad Reza Razfar, Parviz Sarvi Hampa, Mohamad Mahdi Abootorabi, "Experimental investigation of the surface roughness in ultrasonic-assisted milling", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, September 2011
Vol. 225,
Num. 9,
Page 1615-1620,
September 2011,
99
Mohamad Mahdi Abootorabi, Hamed Zoghi Shal, Mohammad Reza Razfar, "Numerical, Analytical and Experimental Study of Structural Properties of Cutting Tool in Endmilling Process", Advanced Materials Research (AMR), June 2011
Vol. 264-265,
Num. 0,
Page 1039-1043,
June 2011,
100
Reza Farshbaf Zinati, Mohammad Reza Razfar, "Constrained optimum surface roughness prediction in turning of X20Cr13 by coupling novel modified harmony search-based neural network and modified harmony search algorithm", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, June 2011
Vol. Published Online,
Num. 0,
Page 0-0,
June 2011,
101
Masoud Farahnakian, Mohammad Reza Razfar, Mehdi Moghri, Mohsen Asadnia, "The Selection of Milling Parameters by the PSO-based Neural Network Modeling Method", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, April 2011
Vol. 0,
Num. 0,
Page 0-0,
April 2011,
102
Ali Fata, Mohammad Reza Razfar, "Determination of Tool Temperature in Orthogonal Metal Cutting by Finite Element Method and its Comparison with Experimental Work", , December 2010
Vol. 42,
Num. 3,
Page 49-59,
December 2010,
103
Mohammad Reza Razfar, Mohsen Asadnia, Mahdiyar Haghshenas Astarabadi, Masoud Farahnakian, "Optimum surface roughness prediction in face milling
X20Cr13 using particle swarm optimization algorithmg", Journal Of Engineerin Manufacturing-Part B, November 2010
Vol. 224,
Num. 11,
Page 1645-1653,
November 2010,
104
Mohammad Reza Soleymani Yazdi, Mohammad Reza Razfar, Mohsen Asadnia, "Using Particle Swarm Optimization based Neural Network For Modeling of Thrust Force Drilling of PA-6/ Nanoclay Nanocomposites", Aplied Mechanics and Materials, October 2010
Vol. 35,
Num. 0,
Page 722-726,
October 2010,
105
Mohamad Mahdi Abootorabi, Mohammad Reza Razfar, "Analytical and Experimental Investigations of Instability in Milling Process
and Studying the Effect of Cutting Parameters and Tool Stiffness", Mechanic & Aerospace Journal, September 2010
Vol. 5,
Num. 3,
Page 81-90,
September 2010,
106
Mohammad Reza Razfar, Reza Farshbaf Zinati, Mahdiyar Haghshenas Astarabadi, "Optimum surface roughness prediction in face milling by using neural network and harmony search algorithm", International Journal of Advanced Manufacturing Technology, June 2010
Vol. 0,
Num. 0,
Page 0-0,
June 2010,
107
Masoud Farahnakian, Mohammad Reza Razfar, Mohammad Haddadzade Bahabadi, Mohsen Khajehzadeh, "Automation in Preparation of Process Sheets", , April 2010
Vol. 1,
Num. 2,
Page 48-53,
April 2010,
108
Mohammad Mohammadpour, Mohammad Reza Razfar, Reza Jalili Safar, "Numerical Investigating the Effect of Machining Parameters on Residual Stresses in Orthognal Cutting", Simulation Modelling Practice and Theory, March 2010
Vol. 18,
Num. 3,
Page 0-0,
March 2010,
109
Reza Jalili Safar, Mohammad Reza Razfar, "Simulation of End Milling Operation for predicting Cutting Forces To Minimize Tool Deflection By Genitic Algorithm", MACHINING SCIENCE AND TECHNOLOGY, March 2010
Vol. 14,
Num. 1,
Page 81-101,
March 2010,
110
Mohammad Haddadzade Bahabadi, Mohammad Reza Razfar, Mohammadreza Morovvati, "Novel approach to initial blank design in deep drawing using artificial neural network", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, October 2009
Vol. 223,
Num. 10,
Page 0-0,
October 2009,
111
Mohammad Reza Razfar, "Optimum Damage and Surface Roughness Prediction in end Milling Glass Fibre-Reinforced Plastics,Using Neural Network and Genetic Algorithm", , May 2009
Vol. ,
Num. 223,
Page 0-0,
May 2009,
112
Mahdiyar Haghshenas Astarabadi, Mohammad Reza Razfar, "Optimum surface roughness prediction in face milling X20Cr13 by using a neural network and a genetic algorithm", , March 2009
Vol. ,
Num. 4,
Page 0-0,
March 2009,
113
Reza Jalili Safar, Mohammad Reza Razfar, "Optimization of Machining Parameters to Minimize Tool Deflection in the End Milling Operation Using Genetic Algorithm", , March 2009
Vol. ,
Num. 6,
Page 0-0,
March 2009,
114
Mohammad Fesanghary, Reza Jalili Safar, Mohammad Reza Razfar, "Optimization of multi-passface-milling via harmony search algorithm", Journal of Materials Processing Technology, February 2009
Vol. 209,
Num. 5,
Page 0-0,
February 2009,
115
Reza Jalili Safar, Mohammad Reza Razfar, "Simulation of three-dimension cutting force and tool deflection in the end milling operation based on finite element method", , November 2008
Vol. ,
Num. 16,
Page 0-0,
November 2008,
116
Amir Mostafapourasl, Mohammad Reza Razfar, "Tool Wear Estimation in Face Milling Using Spindle Motor Parameters With Neural Networks", , July 2005
Vol. ,
Num. 1,
Page 0-0,
July 2005,
Conference Papers
Portal Records
1
Yahya Choopani, Mohammad Bayat, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Principles of Design and Analysis of 12-Speed Gearbox Machine Lathe using Step-by-Step Method ", 27th Annual International Conference on Mechanical Engineering, April 2019
2
Omid Rohani Raftar, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Multi Criteria Optimization of Laser Percussion Drilling Parameters on Titanium Alloy Sheet Ti6Al4V ", 27th Annual International Conference on Mechanical Engineering, April 2019
3
Sepideh Amirhoseini, Behnam Mehrabi, Majid Karimi Rizi, Mohammad Reza Razfar, Mohsen Khajehzadeh, "Finite Element Study of cutting parameters effects on residual stresses during the machining of Ti-6AL-4V ", 25th Annual International Conference on Mechanical Engineering, May 2017
4
Majid Karimi Rizi, Behnam Mehrabi, Sepideh Amirhoseini, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Finite element Simulation and Experimental Study of the cutting tool rake angle effect on the residual stresses during machining 20NiCrMo5 Steel ", 25th Annual International Conference on Mechanical Engineering, May 2017
5
Ali Behroozfar, Mohammad Reza Razfar, "An investigation on the electrochemical discharge drilling of glass through the machined structure analysis ", 23rd Annual International Mechanical Engineering Conference, May 2015
6
Mostafa Memarian, Mohammad Reza Razfar, M.Farahnakien, "experimental investigation of cutting force on AISI440C hardened steel for using on solenoid valve usable on offshore BOP ", international conference of oil, gas and petrochemical engineering with focus on sustainable development, February 2015
7
Ali Heidari, Mohammad Reza Razfar, Ali Behroozfar, Majid Kavousi, "Experimental study of tool shape effects on material removal rate of glass micro-drilling using ECDM process ", 1st international conference on MEMS and Microfabrication, February 2014
8
Majid Kavousi, Mohammad Reza Razfar, Ali Behroozfar, Ali Heidari, "Micro drilling of glass-ceramics using electrochemical discharge machining (ECDM) ", 1st international conference on MEMS and Microfabrication, February 2014
9
M. M. Abotorabi, Amir Abdullah, Mohammad Reza Razfar, "ٍEffect of Vibration Direction on Cutting Forces in ultrasonic Assisted Milling ", 3rd International Conference on Acoustics and Vibration, December 2013
10
Mohammad Reza Razfar, Jun Ni, Ali Behroozfar, Shuhuai Lan, "AN INVESTIGATION ON ELECTROCHEMICAL DISCHARGE MICRO-DRILLING OF GLASS ", ASME 2013 International Manufacturing Science and E#ngineering Conference MSEC2013, June 2013
11
Mohammad Mahdi Aboutorabi, Mohammad Reza Razfar, Amir Abdullah, "Experimental Investigation of chip formation and surface topology in ultrasonic-assisted milling of X20Cr13 stainless steel ", ASME 2013 International Manufacturing Science and Engineering Conference, June 2013
12
, Mohammad Reza Razfar, "modeling machining parameters by response surface method ", International Conference on Mechanical Engineering and Advanced Technology, October 2012
13
Salman Khani , Mohammad Reza Razfar, M.Ghorbani, Masoud Farahnakian, "Experimental and statistical study of cutting forces and surface roughness in cryogenic turning of Ti-6Al-4V ", International Conference on Mechanical Engineering and Advanced Technology, October 2012
14
Reza Farshbaf Zinati, Mohammad Reza Razfar, Mehdi Haghi, "INVESTIGATION OF THE MACHINABILITY OF PA-6/NANO-CACO3 COMPOSITE ", Proceedings of the ASME 2011 International Manufacturing Science and Engineering Conference, June 2012
15
, Mohammad Reza Razfar,, "The effect of number of inserts on tool life in milling of steels ", 3rd International and 12th National Conference on Manufacturing Engineering, December 2011
16
Mohammad Reza Razfar, Mohsen Khajehzadeh, Masoud Farahnakian, "Optimum selection of machine tool and tolerance allocating in chamfered parts by genetic algorithm ", 3rd International and 12th National Conference on Manufacturing Engineering, December 2011
17
, Mohammad Reza Razfar, Ehsan Khosro Jerdi, "Multi objection optimization in turning of Stainless steel 1.4542 by using particle swarm (PSO) method ", 3rd International and 12th National Conference on Manufacturing Engineering, December 2011
18
, Mohammad Reza Razfar, Amir Abdullah, "Tool Life in Ultrasonic Assisted Milling ", 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011, December 2011
19
Sadegh Elhami Joosheghan, Amir Rasti, Mohammad Reza Razfar, Masoud Farahnakian, "experimental study and determination of optimum cutting conditions in end milling of high level of silicon stainless steel ", 3rd International and 12th National Conference on Manufacturing Engineering, December 2011
20
N.Khani, R. A. Mahdavinejad, S.Pedrammehr, M.Cheraghi, Mohammad Reza Razfar, "Utilization of SPH method for simulation of milling process ", 3rd International and 12th National Conference on Manufacturing Engineering, December 2011
21
, Mohammad Reza Razfar, "Setup Planning automation of turned parts based on STEP-NC Standard ", International Conference on Mechanical and Industrial Engineering, November 2011
22
Reza Farshbaf Zinati, Mohammad Reza Razfar, "Constrained Optimization of Surface Roughness in Longitudinal Turning Via Novel Modified Harmony Search ", Proceedings of the ASME 2011 International Manufacturing Science and Engineering Conference, June 2011
23
Amir Rasti, Sadegh Elhami Joosheghan, Mohammad Reza Razfar, Masoud Farahnakian, "Surface roughness optimization in face milling of DURCOMET5 by using GONNS ", 19th annual conference on mechanical engineering, May 2011
24
Reza Farshbaf Zinati, Mohammad Reza Razfar, "Multi-objective constrained optimization of turning process via Harmony search algorithm ", 11th Iranian Conference on Manufacturing Engineering, October 2010
25
, Masoud Farahnakian, Mohammad Reza Razfar, "Computer aided set up planning for turining parts ", 11th Iranian Conference on Manufacturing Engineering, October 2010
26
Mohammad Reza Razfar, Reza Farshbaf Zinati, Mahdiyar Haghshenas Astarabadi, "Optimizing Surface Roughness in Face Milling Using a New Meta-Heuristic Method of Harmony Search ", 10th Biennial Conference on Engineering Systems Design and Analysis ESDA2010
ASME2010, July 2010
27
Masoud Farahnakian, Mohammad Reza Razfar, Mohammad Haddadzade Bahabadi, Mohsen Khajehzadeh, "A New Model for Integration of Process Planning and Production Planning for Cylindrical Parts ", Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, July 2010
28
Mohamad Mahdi Abootorabi, Hamed Zoghi Shal, Mohammad Reza Razfar, "Analytical Investigation of Chatter and Its Effective Parameters in Milling: Using Modal Experiment ", Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, July 2010
29
Farhad Saffar Aval, Alireza Siami, Naser Mokhtarifar, Majid Saffar-Avval, Mohammad Reza Razfar, Zohreh Mansoori, Yousef Imani, Mahmood Abolghasemi, "Experimental Setup to Investigate Gas Solid Heat Transfer in a Riser ", 7th International Conference on Multiphase Flow
ICMF 2010, May 2010
30
Mohamad Mahdi Abootorabi, Hamed Zoughi-Shal, Mohammad Reza Razfar, "Numerical analytical and experimental study of structural properties of cutting tool in endmiling process ", , October 2009
31
Mohammad Haddadzade Bahabadi, Mohammad Reza Razfar, Masoud Farahnakian, "Integrating Process Planning and Scheduling for
Prismatic Parts Regard to Due Date ", PROCEEDINGS OF WORLD ACADEMY OF SCIENCE, ENGINEERING AND TECHNOLOGY, March 2009
32
[en-name N/A], Mohammad Reza Razfar, "Optimum surface roughness prediction in face milling X20Cr13 by using neural network and genetic algorithm ", , April 2008
33
[en-name N/A], [en-name N/A], [en-name N/A], Mohammad Reza Razfar, "Optimization of workpiece elastic deflection in machining operations using ant colony system ", , December 2007
34
Hamed Sadeghinia, Mohammad Reza Razfar, Jafar Takabi, "2D finite element modeling of face milling with damage effects ", , December 2007
35
[en-name N/A], Mohammad Reza Razfar, "Finit elenent modeling and analytical analysis of workpiece eleatic deflection under cutting forces in turning operation ", , November 2007
36
Reza Jalili Safar, Mohammad Reza Razfar, "Optimization of machining parameters for minimizing toll deflection in end milling operation by using genetic algorithm ", , June 2007
37
Reza Jalili Safar, Mohammad Reza Razfar, "Simulation (FEM) of end milling operation for predicting the forces machining ", , June 2007
38
Hamid Farrokhi, Mohammad Reza Razfar, "Optimization of warpage and shrinkage in injection molded parts using taguchi method ", , January 2007
39
Mohammad Reza Razfar, [en-name N/A], "Experimental investigation of temperature at tool chip intrface inorthogonal machining dependingon cutting parameters ", , January 2007
40
Mohammad Reza Razfar, "Finite Element Simulationof Crack Grpwth in Blanking Process using floating Collapsed Elements ", , August 2005
Taught Courses
#
Course title
Description
Headlines
Date
1
Computer Aided Process Planning (C. a. P. P)
اهداف این درس طراحی فرایند ساخت یک قطعه (عملیات ماشینکاری) و کامپیوتری شدن این فرایند می باشد.
Spring 2023
2
Machining and Machine Tools
The purpose of this course is to give students basic training in the operation of machine tools and metal cutting process. In addition, the students will be trained with the latest developments in conventional machining processes.
Spring 2023
Inventions/Patents
#
Invention title
Reg. number
Country
contributers
Reg. date
Exp. date
1
Ultrasonic and plasma assisted milling
83063
2014/06/1
-
2
Plasma assisted milling
79117
2013/04/1
2032/11/1
3
Cryogenic machining of high strength steels
78487
2013/02/1
2032/09/1