Seyed.Ali SADOUGH VANINI - Amirkabir University of Technology

Special services: Faculty Members Students Graduates

Content

Pepole

Amirkabir University of Technology

Resume Service

Seyed.Ali SADOUGH VANINI

Professor
Department of Mechanical Engineering
(Emeritus)

Download PDF فارسی

Email:

sadough

aut.ac.ir

Phone:

h-index (Scopus):

23.00

Citations (Scopus):

1536

Supervised PhD Theses

Thesis title

Date

Influence of Ultrasonic Peening Treatment at Room and CryogenicTemperatures on Transformation of Austenitic Stainless Steel and Fatigue Life

ALI GHASEMI

2023 Jul

Supervised MSc Theses

Thesis title

Date

Investigating the property of self-diagnosis of composite materials and its use in damage detection

ERFAN GHANBARI FASHI

2024 Sep

Phase-field Modeling of the Microstructural Evolution of 304 Austenitic Stainless Steel Under Ultrasonic Shot Peening

SEYYED HOSSEIN ALAVI

2024 Jul

Numerical Analysis of Bending and buckling Behavior of Sandwich Curved Beams with Auxetic Honeycomb Core

MOHAMMADREZA NASRI

2023 Oct

buckling analysis of composite shell reinforced by nano-clay and nano-silica in corrosive environment

SEYED MASOUD MONTAZERI

2023 Jun

Experimental and numerical determination of mechanical properties in the surface layers of 304 stainless steel after peeninig treatment by indentation test.

SEYYED PARSA POURSAFAVI

2023 Mar

Vibration analysis of composite cylindrical shell reinforced with nanoclay and nanoslica in acidic environment

MAYSAM ALINIA

2023 Feb

Influence of mechanical behavior of Adhesive bound layer on Electro-mechanical Impedance method

SEYEDE ZAHRA SHARIFI SHURKAIE & MAHNAZ SHAMSHIRSAZ

2023 Feb

Improved piezoresistivity and damage detection application of hybrid carbon nanotube sheetgraphite, carbon fiber prepreg composites

MOHAMAD SHARIFI SHIR MOHAMADI

2022 Oct

Behavior simulation of composite materials with self-diagnostic feature

KIOUMARS JAFARI KHALAFLOO & ALI NIKBAKHT

2021 Oct

Extende Finite Element Method Analysis of continuum damage mechanics in particulate biocomposites

MOHAMMAD KARIMI

2018 Nov

The Study of Fracture behavior of Bioglass composites using eXtended Finite Element Method

ARANG PAZHOUHESHGAR

2018 Oct

Vibration and thermal buckling analysis of piezoelectric functionally graded nanobeams

ALI RAHMANI

2018 Jun

Numerical and experimental study of mechanical properties of nanoparticle reinforced polymericed foams

MOHAMMAD BAHRANI

2017 Jul

Analysis of failure and crack constitution in cupper cast with electronless crystallization blast furnace and recover ways by welding process

HAMIDREZA ALINAGHIAN ELYADERANI

2017 Feb

Effects of ultrasonic impact treatment in fatigue-corrosion of weld toe stainless steel tube

BABAK FEREIDOONI

2016 Jul

Modeling of Impact Resistance of Shear Thickening Fluid. Silica nano particlespolyethylene Glycol

AMIR SEDIEQYMOQADAMPOUR

2016 Apr

Investigation of Semisolid Process Welding Characteristics of Tools Steels

SEYED MOSTAFA SHEKARABI

2015 Sep

Rheology investigation of shear thickening fluids under low velocity impact loading

ESMAIL BALALI

2015 Feb

Investigation the effects of ultrasonic impact treatment on corrosion fatigue behavior of high temperature steels

MORTEZA DAAVARI

2014 Oct

A numerical & experimental study on high - velocity impact of elastomeric and elastic - plastic foams

ALI TAHERKHANI

2014 Feb

Effect of Carbonn Nanotube in Mechanical Properties of Nanocomposites Joints

MOHAMMAD REZA BAGHERI

2013 Oct

Elastic stress analysis and prediction of failure initiation in FGS interfacial phase

2013 Mar

theoretical analysis of structural nanocomposites elastic modulus and comprasion with experimental results

REZVAN ADIBIPOUR

2012 Nov

Buckling of laminated panels reinforced with Shape Memory Alloys

& Manouchehr Salehi

2012 Oct

Investigation of elasto-plastic crack evolution in functionally graded steel

2012 Sep

Study of Rheological Behavior of A356 Aluminum Alloy in Semi-Solid State

AMIN JABBARI GULLIJA & BIJAN MOLLAEI DARIANI

2012 Sep

Modeling of Failure Strength and impact in functionally graded steels

2012 Feb

Theoretical and experimental analysis shape control of composite beam with shape memory alloy(SMA) actuator

HASAN GHAEDALI

2009 Mar

Evaluation of the effects of process parameters on the mechanical properties of thixoextruded parts

SEYED MEGHDAD SHARIAT ZADEH

2009 Jan

investigation of mechanical properties and adhesion of coating deposited using a spin- coating technique

EHSAN MOAZAMI GOODARZI & DR. FARID REZA BIGLARI

2008 Mar

NUMERICAL AND PHYSICAL MODELLING OF FLOW PATTERN OF METERIAL IN FORGING PROCESS WITH PREFORMS DESIGNED THROUGH THE METHOD OF INTERPOLATION OF BOUNDARY ELEMENTS

MASOUD MIRSAEIDI & DR. FARID REZA BIGLARI

2008 Feb

MODELING AND SIMULATION OF THIXOBACKWARD-EXTRUSION PROCESS AND TEMPERATURE EFFECT ON FLOW CHARACTERISTICS OF THE SEMI-SOLID MATERIAL

FARZAD HOSSEINI YEKTA & DR. FARID REZA BIGLARI

2008 Feb

A NUMERICAL & EXPERIMENTAL STUDY OF THE BEHAVIOR OF ELASTOMERS UNDER IMPACT LOADING

SATTAR JEDARI SALAMI

2008 Feb

ARTIFICIAL NEURAL NETWORKS FOR FATIGUE LIFE PREDICTION OF COMPOSITES

SEYED HOSSEIN PARHIZGAR

2007 Nov

MODELING AND SIMULATION OF THIXOFORGING PROSESS

VAHID POUYAFAR & DR. FARID REZA BIGLARI

2007 Jan

ANALYSIS OF COMPOSITE SHEET THERMOFORMING

MEHDI SHIRANI & DR. FARID REZA BIGLARI

2007 Jan

Application of Artificial Neural Networks in Predicting the Behavior of Sandwich Structures with Cellular Core and Composite Face Sheets Under Bending Load

AMIRHOSSEIN MASHHOUR

2025 Sep

Mechanical Behavior and Nonlinear Bending Analysis of Sandwich Plate with Foam Core and 3D-Printed Continuous Fiber Reinforced Polylactic Acid Composite Face-sheets

PARSA MASDAR

2025 Sep

An Experimental Study on the Bending Behavior of Eco-Friendly Sandwich Beams under Humid Environment

HOSEIN MAHMOUDIAN ALIABADI

2025 Sep

Books

Title

Author(s)

Publisher country

publication date

version

Introduction to Materials Science

SADOUGH VANINI Seyed.Ali

Iran

Introduction to Materials Science

SADOUGH VANINI Seyed.Ali

Iran

Heat Treatment of Metals and Alloys

SADOUGH VANINI Seyed.Ali

Iran

Composite Technology

SADOUGH VANINI Seyed.Ali

Iran

Heat Treatment of Metals and Alloys

SADOUGH VANINI Seyed.Ali

Iran

Introduction to Materials Science

SADOUGH VANINI Seyed.Ali

Iran

Introduction to Materials Science

SADOUGH VANINI Seyed.Ali

Iran

The Shape memory Alloys in Medical Engineering

SADOUGH VANINI Seyed.Ali

Iran

Journal Papers

Salari Erfan ، Ghasemi Fatemeh ، Masdar Parsa ، Salari Arshia ، Ebrahimi Farzad ، SADOUGH VANINI Seyed.Ali ، Rastgoo Abbas, "Nonlinear in-plane buckling of 3D-printed sandwich shallow arch metastructures with carbon fiber reinforced polylactic acid composite layers", Mechanics of Advanced Materials and Structures, 2026 Oct vol. , no. 1, pp.1-26, 2026.

MONTAZERI SEYED MASOUD ، SABER SAMANDARI SAEED ، SADOUGH VANINI Seyed.Ali, "Thermal buckling analysis of reinforced composite conical shells in acidic environments: Numerical and experimental investigation on the effects of nanoparticles", Heliyon, 2024 Sep vol. 10, no. 1, pp.37443-37443, 2024.

GHASEMI ALI ، SADOUGH VANINI Seyed.Ali ، Maryam Alizadeh Zolbin ، Ramin Aghababaei, "Exploring the influence of ultrasonic peening treatment at ambient and cryogenic conditions on the surface characteristics and fatigue life of austenitic stainless steel 304?L", Surface and Coatings Technology, 2024 Sep vol. 494, no. 0, pp.1-18, 2024.

NASRI MOHAMMADREZA ، erfan salari ، arshia salari ، SADOUGH VANINI Seyed.Ali, "Nonlinear bending and buckling analysis of 3D-printed meta-sandwich curved beam with auxetic honeycomb core", Aerospace Science and Technology, 2024 Jun vol. 152, no. 0, pp.1-23, 2024.

GHASEMI ALI ، SADOUGH VANINI Seyed.Ali, "Experimental and numerical investigation of martensite phase transformation in austenitic stainless steel subjected to ultrasonic nanocrystal surface modification at room and cryogenic temperatures", Surface and Coatings Technology, 2023 Oct vol. 474, no. 0, pp.1-20, 2023.

NIKBAKHT ALI ، JAFARI KHALAFLOO KIOUMARS ، SADOUGH VANINI Seyed.Ali, "Investigating the effect of delamination on self-diagnostic behavior of carbon/CNT epoxy composites", Advanced Materials Materials and Novel Coatings, 2023 Aug vol. 0, no. 0, , 2023.

ALINIA MAYSAM ، SABER SAMANDARI SAEED ، SADOUGH VANINI Seyed.Ali, "On the mechanical properties and vibrational characteristics of the nanoparticle-reinforced composite cylindrical panels in the acidic environment: Numerical and experimental investigation", Journal of Reinforced Plastics and Composites, 2023 Aug vol. 0, no. 0, pp.1-19, 2023.

GHASEMI ALI ، SADOUGH VANINI Seyed.Ali, "A comprehensive investigation on the effect of controlling parameters of ultrasonic peening treatment on residual stress and surface roughness: Experiments, numerical simulations and optimization", Surface and Coatings Technology, 2023 Apr vol. 464, no. 0, pp.1-19, 2023.

LAK MEHDI ، SADOUGH VANINI Seyed.Ali ، GHASEMI ALI, "Investigation on experiments and numerical modeling of the residual stress distribution in deformed surface layer of Al6061 alloy after ultrasonic peening treatment", Materialwissenschaft Und Werkstofftechnik, 2022 Aug vol. 53, no. 8, pp.876-887, 2022.

SALARI ERFAN ، ASHOORI ALIREZA ، SADOUGH VANINI Seyed.Ali ، A H Akbarzadeh, "Nonlinear dynamic buckling and vibration of thermally post-buckled temperature-dependent FG porous nanobeams based on the nonlocal theory", Physica Scripta, 2022 Jul vol. 97, no. 0, pp.1-25, 2022.

SALARI ERFAN ، SADOUGH VANINI Seyed.Ali, "Nonlocal nonlinear static/dynamic snap-through buckling and vibration of thermally post-buckled imperfect functionally graded circular nanoplates", Waves In Random and Complex Media, 2022 Mar vol. 0, no. 0, pp.1-47, 2022.

SALARI ERFAN ، SADOUGH VANINI Seyed.Ali, "Small/large amplitude vibration, snap?through and nonlinear thermo?mechanical instability of temperature?dependent FG porous circular nanoplates", Engineering With Computers, 2022 Mar vol. 0, no. 0, pp.1-32, 2022.

LAK MEHDI ، SADOUGH VANINI Seyed.Ali ، SALARI ERFAN, "Investigation of thermo-mechanical loading effect on the residual stress relaxation in Al6061 alloy using simulation and experiments", Journal of The Brazilian Society of Mechanical Sciences and Engineering, 2021 Oct vol. 43, no. 0, pp.1-9, 2021.

SALARI ERFAN ، SADOUGH VANINI Seyed.Ali ، ASHOORI ALIREZA ، A.H.Akbarzadeh, "Nonlinear thermal behavior of shear deformable FG porous nanobeams with geometrical imperfection: snap-through and postbuckling analysis", International Journal of Mechanical Sciences, 2021 Mar vol. 178, no. 0, pp.1-19, 2021.

SALARI ERFAN ، SADOUGH VANINI Seyed.Ali, "Investigation of thermal preloading and porosity effects on the nonlocal nonlinear instability of FG nanobeams with geometrical imperfection", European Journal of Mechanics A-Solids, 2020 Dec vol. 86, no. 0, pp.1-22, 2020.

PAZHOUHESHGAR ARANG ، Amirhossein Moghanian ، SADOUGH VANINI Seyed.Ali, "The extended finite elements method numerical and experimental analysis of mechanical behavior of polysulfone/58s bioactive glass synthesized through solvent casting method", Modares Mechanical Engineering, 2020 Aug vol. 20, no. 8, pp.2061-2073, 2020.

GHASEMI ALI ، SHAKERI MAHMOUD ، SADOUGH VANINI Seyed.Ali, "A multi-objective optimization of energy absorption properties of thin-walled circular tube with combined bar extrusion under quasi-static axial loading: Experiments and numerical simulation", International Journal of Mechanical Sciences, 2020 May vol. 180, no. 0, pp.1-14, 2020.

ALINAGHIAN ELYADERANI HAMIDREZA ، SADOUGH VANINI Seyed.Ali ، seyed mahmoud monir vaghefi, "Evaluation of microstructure and hardness in repair with OAWmethod in copper DHP moulds", Journal of Welding Science and Technology of Iran, 2020 Mar vol. 6, no. 1, pp.67-80, 2020.

SALARI ERFAN ، SADOUGH VANINI Seyed.Ali ، ASHOORI ALIREZA, "Nonlinear thermal stability and snap-through buckling of temperature-dependent geometrically imperfect graded nanobeams on nonlinear elastic foundation", Materials Research Express, 2020 Feb vol. 6, no. 12, pp.1-22, 2020.

Naser Kordani ، SADOUGH VANINI Seyed.Ali ، ADIBIPOUR REZVAN, "NEW THEORY TO PREDICT THE ELASTIC MODULUS OF CARBON NANOTUBE BASED-COMPOSITES", Journal of Theoretical and Applied Mechanics, 2019 Nov vol. 49, no. 4, pp.360-368, 2019.

Kamran Hajihassani ، Vahid Pouyafar ، SADOUGH VANINI Seyed.Ali, "Study of microstructure and mechanical properties of aluminum 7075 alloy extruded in a semi-solid state", Materials Research Express, 2019 Oct vol. 6, no. 11, pp.116591-116602, 2019.

PAZHOUHESHGAR ARANG ، SADOUGH VANINI Seyed.Ali ، Amirhosein moghanin, "The experimental and numerical study of fracture behavior of 58s bioactive glass/polysulfone composite using the extended finite elements metho", Materials Research Express, 2019 Aug vol. 6, no. 9, pp.1-22, 2019.

SALARI ERFAN ، ASHOORI ALIREZA ، SADOUGH VANINI Seyed.Ali, "Porosity-dependent asymmetric thermal buckling of inhomogeneous annular nanoplates resting on elastic substrate", Advances In Nano Research, 2019 Feb vol. 7, no. 1, pp.25-38, 2019.

FEREIDOONI BABAK ، MOROVVATI MOHAMMAD REZA ، SADOUGH VANINI Seyed.Ali, "Influence of severe plastic deformation on fatigue life applied by ultrasonic peening in welded pipe 316 Stainless Steel joints in corrosive environment", Ultrasonics, 2018 Mar vol. 88, no. 0, pp.137-147, 2018.

BAGHERI MOHAMMAD REZA ، Nasser Kordani ، SADOUGH VANINI Seyed.Ali, "Multi-scale Simulation of Double-Walled Carbon Nanotube-Reinforced Composites", Iranian Journal of Science & Technology, 2017 Nov vol. 0, no. 0, pp.1-8, 2017.

KAMI ABDOLVAHED ، MOLLAEI DARIANI BIJAN ، Dan-Sorin Comsa ، Dorel Banabic ، SADOUGH VANINI Seyed.Ali ، Mathias Liewald, "An Experimental Study on the Formability of a Vibration Damping Sandwich Sheet (Bondal)", Proceedings of The Romanian Academy Series A-Mathematics Physics Technical Sciences Information Science, 2017 Sep vol. 18, no. 2, pp.281-290, 2017.

ASHOORI ALIREZA ، SADOUGH VANINI Seyed.Ali, "Vibration of circular functionally graded piezoelectric plates in pre-/postbuckled configurations of bifurcation/limit load buckling", Acta Mechanica, 2017 May vol. 228, no. 9, pp.2945-2964, 2017.

BALALI ESMAIL ، SADOUGH VANINI Seyed.Ali ، Naser Kordani ، Ghodratalah Ekafis, "EEXPERIMENTAL ANALYSIS OF PENETRATION INTO WOVEN FABRIC TARGET IMPREGNATED WITH SHEAR THICKENING FLUID WITH CLAY NANOPARTICLES", , 2017 May vol. 33-3, no. 1, pp.49-54, 2017.

ASHOORI ALIREZA ، SADOUGH VANINI Seyed.Ali ، SALARI ERFAN, "Size-dependent axisymmetric vibration of functionally graded circular plates in bifurcation/limit point instability", Applied Physics A-Materials Science and Processing, 2017 Mar vol. 123, no. 3, pp.226-240, 2017.

GHAEDALI HASAN ، SADOUGH VANINI Seyed.Ali ، SADIGHI MOJTABA, "Experimental and Theoretical evaluation of Bending Behavior of Shape Memory Actuator", , 2016 Dec vol. 48, no. 4, pp.355-362, 2016.

ASHOORI ALIREZA ، SALARI ERFAN ، SADOUGH VANINI Seyed.Ali, "Size-dependent thermal stability analysis of embedded functionally graded annular nanoplates based on the nonlocal elasticity theory", International Journal of Mechanical Sciences, 2016 Nov vol. 119, no. 0, pp.396-411, 2016.

ASHOORI ALIREZA ، SADOUGH VANINI Seyed.Ali, ": Nonlinear bending, postbuckling and snap-through of circular size-dependent functionally graded piezoelectric plates", Thin-Walled Structures, 2016 Nov vol. 111, no. 0, pp.19-28, 2016.

FARTASHVAND VAHID ، ABDULLAH AMIR ، SADOUGH VANINI Seyed.Ali, "Effects of High Power Ultrasonic Vibration on the Cold Compaction of Titanium", Ultrasonics Sonochemistry, 2016 Nov vol. 36, no. 0, pp.155-161, 2016.

Naser Kordani ، SADOUGH VANINI Seyed.Ali, "Investigation of penetration into woven fabric specimens impregnated with shear thickening fluid", Science and Engineering of Composite Materials, 2016 Sep vol. 25, no. 1, pp.205-212, 2016.

Shahriar alikarami ، Naser Kordani ، SADOUGH VANINI Seyed.Ali ، Hosein Amiri, "Effect of the yarn pull-out velocity of shear thickening fluid-impregnated Kevlar fabric on the coefficient of friction", Journal of Mechanical Science and Technology, 2016 Aug vol. 36, no. 8, pp.3559-3565, 2016.

FARTASHVAND VAHID ، ABDULLAH AMIR ، SADOUGH VANINI Seyed.Ali, "Investigation of Ti-6Al-4V alloy acoustic softening", Ultrasonics Sonochemistry, 2016 Jul vol. 38, no. 0, pp.744-749, 2016.

ASHOORI ALIREZA ، SADOUGH VANINI Seyed.Ali, "Nonlinear thermal stability and snap-through behavior of circular microstructure-dependent FGM plates", European Journal of Mechanics A-Solids, 2016 May vol. 59, no. 0, pp.323-332, 2016.

BALALI ESMAIL ، Naser Kordani ، SADOUGH VANINI Seyed.Ali, "Response of glass fiber-reinforced hybrid shear thickening fluid (STF) under low-velocity impact", Journal of The Textile Institute, 2016 May vol. 107, no. 8, pp.1-12, 2016.

Naser Kordani ، SADOUGH VANINI Seyed.Ali ، Hosein Amiri, "Numerical solution of penetration into woven fabric target impregnated with shear thickening fluid", Polymers and Polymer Composites, 2016 Feb vol. 24, no. 4, pp.281-288, 2016.

DAAVARI MORTEZA ، SADOUGH VANINI Seyed.Ali ، Eskandar Fereiduni ، HOSSEINPOURROKNI MOHSEN, "Mechanical and electrochemical behaviors of butt-welded high temperature steel pipes", Engineering Failure Analysis, 2016 Jan vol. 62, no. 0, pp.287-299, 2016.

TAHERKHANI ALI ، SADIGHI MOJTABA ، SADOUGH VANINI Seyed.Ali ، ZAREI MAHMOUDABADI MOHSEN, "An experimental study of high-velocity impact on elastic-plastic crushable polyurethane foams", Aerospace Science and Technology, 2015 Nov vol. 50, no. 0, pp.245-255, 2015.

DAAVARI MORTEZA ، SADOUGH VANINI Seyed.Ali ، Ashouri Gholamali, "Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment", , 2015 Nov vol. 6, no. 1, pp.83-95, 2015.

ASHOORI ALIREZA ، SADOUGH VANINI Seyed.Ali, "Thermal buckling of annular microstructure-dependent functionally graded material plates resting on an elastic medium", Composites Part B-Engineering, 2015 Oct vol. 87, no. 0, pp.245-255, 2015.

HOSSEINIYEKTA FARZAD ، SADOUGH VANINI Seyed.Ali, "Simulation the Flow of Semi-Solid Steel Alloy Using an Enhanced Model", Journal of The Korean Institute of Metals and Materials, 2015 Sep vol. 21, no. 5, pp.913-922, 2015.

Naser Kordani ، SADOUGH VANINI Seyed.Ali, "Yarn pulling out test and numerical solution of penetration into woven fabric target impregnated with shear thickening fluid using SiO2 /Polyethylene Glycol", International Journal of Nano Dimension, 2015 Sep vol. 6, no. 4, pp.409-416, 2015.

DAAVARI MORTEZA ، SADOUGH VANINI Seyed.Ali, "The Effect of Ultrasonic Peening on Service Life of the Butt-Welded High Temperature Steel Pipes", Journal of Materials Engineering and Performance, 2015 Aug vol. 24, no. 9, pp.3658-3665, 2015.

BAGHERI MOHAMMAD REZA ، SADOUGH VANINI Seyed.Ali ، naser kordani ، SADIGHI MOJTABA, "The effect of nanoparticles in single-lap composite joints studied by experimental and numerical analyses", Iranian Polymer Journal, 2015 Jul vol. 24, no. 8, pp.629-640, 2015.

KAMI ABDOLVAHED ، MOLLAEI DARIANI BIJAN ، SADOUGH VANINI Seyed.Ali ، Dan Sorin Comsa ، Dorel Banabic, "Prediction of the forming limit curves using GTN damage model", Romanian Journal of Technical Sciences-Applied Mechanics, 2015 Jun vol. 59, no. 3, pp.24-35, 2015.

HOSSEINIYEKTA FARZAD ، SADOUGH VANINI Seyed.Ali, "MODELING OF SEMI-SOLID BEHAVIOR OF STEELS USING A MICROMECHANICAL APPROACH", Proceedings of The Romanian Academy Series A-Mathematics Physics Technical Sciences Information Science, 2015 May vol. 16, no. 2, pp.193-200, 2015.

naser kordani ، ADIBIPOUR REZVAN ، SADOUGH VANINI Seyed.Ali ، A. Zare ، V.gil, "Theoretical models and experimental study on mechanical properties of reinforced polymer matrix using different kinds of carbon nanotubes", Polymers and Polymer Composites, 2015 May vol. 23, no. 4, pp.205-214, 2015.

DAAVARI MORTEZA ، SADOUGH VANINI Seyed.Ali, "Corrosion fatigue enhancement of welded steel pipes by ultrasonic impact treatment", Materials Letters, 2014 Oct vol. 139, no. 0, pp.462-466, 2014.

KAMI ABDOLVAHED ، MOLLAEI DARIANI BIJAN ، SADOUGH VANINI Seyed.Ali ، Dan-Sorin Comsa ، Dorel Banabic, "Numerical determination of the forming limit curves of anisotropic sheet metals using GTN damage model", Journal of Materials Processing Technology, 2014 Oct vol. 216, no. 0, pp.472-483, 2014.

SADOUGH VANINI Seyed.Ali ، ، KORDANI NASER, "Numerical Investigation of Sliding Frictional Contact in Functionally Graded Steels (FGS", Materials Research-Ibero-American Journal of Materials, 2014 Jul vol. 0, no. 0, pp.1-8, 2014.

Amin jabbari ، SADOUGH VANINI Seyed.Ali ، Vahid pouyafar, "Rotational Rheology of A356 Semi-Solid Alloy at Low Solid Fractions", Advanced Materials Research, 2014 Jul vol. 1019, no. 0, pp.74-80, 2014.

HOSSEINIYEKTA FARZAD ، SADOUGH VANINI Seyed.Ali ، V.Pouyafar, "Feasibility of partial remelting process in globular microstructure preparation for semi-solid processing of M2 high-speed steel", Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 2014 Jun vol. 0, no. 0, pp.1-8, 2014.

HOSSEINIYEKTA FARZAD ، SADOUGH VANINI Seyed.Ali, "Flow Behavior and Rheological Properties of M2 High Speed Steel in Semi-solid State", Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 2014 May vol. 0, no. 0, pp.1-10, 2014.

KAMI ABDOLVAHED ، MOLLAEI DARIANI BIJAN ، SADOUGH VANINI Seyed.Ali ، Dan-Sorin COMSA ، Dorel Banabic, "APPLICATION OF A GTN DAMAGE MODEL TO PREDICT THE FRACTURE OF METALLIC SHEETS SUBJECTED TO DEEP-DRAWING", Proceedings of The Romanian Academy Series A-Mathematics Physics Technical Sciences Information Science, 2014 Apr vol. 15, no. 0, , 2014.

SADOUGH VANINI Seyed.Ali ،, "Analytical modeling of fracture toughness JIC of austenitic-martensitic functionally graded steels with crack arrester layers", , 2014 Jan vol. 13, no. 11, pp.110-121, 2014.

KORDANI NASER ، SADOUGH VANINI Seyed.Ali, "Optimizing the Ethanol Content of Shear Thickening Fluid/ Fabric Composites under Impact Loading", Journal of Mechanical Science and Technology, 2014 Jan vol. 28, no. 2, pp.663-667, 2014.

KORDANI NASER ، SADOUGH VANINI Seyed.Ali, "Different Method to make Laminates by Shear Thickening Flouid", Science and Engineering of Composite Materials, 2013 Jul vol. 21, no. 3, pp.421-425, 2013.

SADOUGH VANINI Seyed.Ali ، ، ASSADI ABBAS, "Generalized Constitutive-Based Theoretical and Empirical Models for Hot Working Behavior of Functionally Graded Steels", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2013 Jun vol. 44, no. 7, pp.3376-3384, 2013.

PUYA FAR VAHID ، SADOUGH VANINI Seyed.Ali, "An Enhanced Herschel-Bulkley Model for Thixotropic Flow Behavior of Semi-Solid Steel Alloys", Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2013 Jun vol. 0, no. 0, pp.0-10, 2013.

Ab Fereidoon ، Y. Rostamiyan ، A. M. Babaee ، SADOUGH VANINI Seyed.Ali ، KORDANI NASER, "Application of the Generalized Differential Quadrature Method to the Nonlinear Analysis of Pull-In Phenomena in Nano-Electro-Mechanical Coupled Systems", Journal of Computational and Theoretical Nanoscience, 2013 Jun vol. 10, no. 6, pp.1-12, 2013.

J.khaleghinia ، SADOUGH VANINI Seyed.Ali ، ، KORDANI NASER, "Simulation of critical J-integral in functionally graded steels components weakened by U and blunt V-shape notches under Charpy test", Computational Materials Science, 2013 Jan vol. 70, no. 0, pp.123-132, 2013.

PUYA FAR VAHID ، SADOUGH VANINI Seyed.Ali ، HOSSEINIYEKTA FARZAD ، JABBARI GULLIJA AMIN, "The Influence of Reheating Profile on the Final Microstructure of the Semi-Solid S600 and K100 Tool Steels", Solid State Phenomena, 2013 Jan vol. 192, no. 192, pp.204-208, 2013.

HOSSEINIYEKTA FARZAD ، SADOUGH VANINI Seyed.Ali ، PUYA FAR VAHID ، JABBARI GULLIJA AMIN, "FLOW BEHAVIOUR OF M2 STEEL ALLOY DURING SEMI SOLID ISOTHERMAL RAPID COMPRESSION", Solid State Phenomena, 2013 Jan vol. 192, no. 192, pp.311-316, 2013.

HOSSEINIYEKTA FARZAD ، SADOUGH VANINI Seyed.Ali ، PUYA FAR VAHID ، JABBARI GULLIJA AMIN, "The Rheological Behavior of HS6-5-2 Tool Steel For Non-Isothermal Processing", Solid State Phenomena, 2013 Jan vol. 192, no. 192, pp.317-322, 2013.

PUYA FAR VAHID ، SADOUGH VANINI Seyed.Ali ، HOSSEINIYEKTA FARZAD ، JABBARI GULLIJA AMIN, "HIGH TEMPERATURE FLOW BEHAVIOUR OF SEMI-SOLID STEEL ALLOYS", Solid State Phenomena, 2013 Jan vol. 192, no. 192, pp.365-369, 2013.

KORDANI NASER ، SADOUGH VANINI Seyed.Ali ، ASADI ALI, "Research on angle of the failure cone of lightweight nanoceramic/metal laminated composite in the impact test", Neural Computing and Applications, 2012 Dec vol. 0, no. 0, pp.1-6, 2012.

KORDANI NASER ، SADOUGH VANINI Seyed.Ali ، ASADI ALI ، JABBARI GULLIJA AMIN, "Optimization of fracture behavior of alumina/silicon carbide nano ceramic", Neural Computing and Applications, 2012 Oct vol. 0, no. 0, , 2012.

SADOUGH VANINI Seyed.Ali ، ، ASSADI ABBAS ، ALIZADEH VAGHASLOO YOUNES, "Investigation of strain rate and temperature effects on mechanical behavior of functionally graded steels (FGSs) under hot compression", International Journal of The Physical Sciences, 2012 Aug vol. 7, no. 32, pp.5230-5238, 2012.

SADOUGH VANINI Seyed.Ali ، ، KORDANI NASER ، SARMADIAN MOSTAFA, "Dynamic notch fracture toughness JVC assessment of functionally austenitic-martensitic graded steels", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2012 Jun vol. 546, no. 0, pp.198-206, 2012.

FARTASHVAND VAHID ، ABDULLAH AMIR ، SADOUGH VANINI Seyed.Ali ، ABEDINI REZVAN, "Investigation of ultrasonic waves application in feeding of powder", , 2012 May vol. 21, no. 82, pp.50-58, 2012.

ASADI ALI ، SADOUGH VANINI Seyed.Ali ، JABBARI GULLIJA AMIN, "Heat treatment of Al2O3-SiC-MgO nanoceramic and optimizing the fracture performance", International Journal of The Physical Sciences, 2011 Oct vol. 6, no. 22, pp.5253-5260, 2011.

ASADI ALI ، SADOUGH VANINI Seyed.Ali, "Modeling of impact behavior of lightweight composites under metallic Projectile", Applied Mechanics and Materials, 2011 Aug vol. 88-89, no. 1, pp.214-218, 2011.

ASADI ALI ، SADOUGH VANINI Seyed.Ali ، FARROKHI ARASH, "Optimization of mechanical properties of Al2O3/SiC nanocomposite body", Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 2011 Aug vol. 225, no. 0, pp.266-276, 2011.

ASADI ALI ، SADOUGH VANINI Seyed.Ali ، JABBARI GULLIJA AMIN, "Investigation on the impact behavior of Al 2O3 -SiC -MgO nanoceramic/metal laminated composite", Journal of Mechanical Science and Technology, 2011 May vol. 25, no. 9, pp.2179-2184, 2011.

KOUHIKAMALI RAMIN ، ABBASSI ABBAS ، SADOUGH VANINI Seyed.Ali ، SAFFAR-AVVAL MAJID, "Numerical simulation and parametric study of forced convective condensation in vertical channel", , 2011 Apr vol. 43, no. 1, pp.25-34, 2011.

SHAYAN MOHSEN ، AREZOO BEHROOZ ، SADOUGH VANINI Seyed.Ali ، Ali Amani, "silicon (100) undercutting modelling and corner compensation structures design in wet anisotrpic etching process", Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 2011 Apr vol. 225, no. 1, pp.1-10, 2011.

Alireza alikhani ، Aria Alasti ، SADOUGH VANINI Seyed.Ali ، Farbod Ghahremani, "Control and simulation of an new Large Scale Cable Driven Robot with three Dof Translational for big applications", Iranian Journal of Mechanical Engineering Transactions of The Isme, 2011 Mar vol. 13, no. 1, pp.66-84, 2011.

ALIKHANI ALIREZA ، SADOUGH VANINI Seyed.Ali, "Design of a Large-scale cable-driven robot with translational motion", Robotics and Computer-Integrated Manufacturing, 2010 Nov vol. 0, no. 0, , 2010.

SADOUGH VANINI Seyed.Ali ، studente Mohammad reza rahmani ، PUYA FAR VAHID, "Rheological behavior, microstructure and hardness of A356 aluminum alloy in semisolid state using backward extrusion process", Transactions of Nonferrous Metals Society of China, 2010 Aug vol. 20, no. 3, pp.906-910, 2010.

PUYA FAR VAHID ، SADOUGH VANINI Seyed.Ali ، HOSSEINIYEKTA FARZAD, "Design of experiments for determination of influence of different parameters on mechanical properties of semi-solid extruded parts", Transactions of Nonferrous Metals Society of China, 2010 Aug vol. 20, no. 3, , 2010.

ALIKHANI ALIREZA ، SADOUGH VANINI Seyed.Ali ،, "Workspace Analysis of a Three Dof Cable -Driven Mechanism", Journal of Mechanisms and Robotics, 2009 Nov vol. 1, no. 41005, , 2009.

ALIKHANI ALIREZA ، SADOUGH VANINI Seyed.Ali ،, "Investigation and analysis of a new Mechanism for Large Scale Cable Driven Robot with Three Dof Translational", , 2009 May vol. , no. 14, , 2009.

، ABBASSI ABBAS ، SADOUGH VANINI Seyed.Ali, "A simulation model and parametric study of MED-TVC process", Desalination, 2009 Jan vol. , no. 235, , 2009.

RASH AHMADI SAMRAND ، SHAKERI MAHMOUD ، SADOUGH VANINI Seyed.Ali, "Stress analysis in thin coatings and substrate subjected to point contact loading (mechanics of scratch test)", Journal of Materials Processing Technology, 2008 Aug vol. , no. 205, , 2008.

، ABBASSI ABBAS ، SADOUGH VANINI Seyed.Ali ، SAFFAR-AVVAL MAJID, "Thermodynamic Design and Parametric Study of MED-TVC", Desalination, 2008 Mar vol. , no. 222, , 2008.

SHAKERI MAHMOUD ، SADOUGH VANINI Seyed.Ali ، RASH AHMADI SAMRAND, "Elastic stress analysis of bi-layered isotropic coatings and substrate subjected to line scratch indentation", Journal of Materials Processing Technology, 2008 Jan vol. , no. 196, , 2008.

SHAKERI MAHMOUD ، SADOUGH VANINI Seyed.Ali, "Elastic stress analysis of bi-layered isotropic coatings and substrate subjected to line scratch indentation", Journal of Materials Processing Technology, 2007 Jun vol. , no. , , 2007.

ROUZITALAB SAEID ، AREZOO BEHROOZ ، SADOUGH VANINI Seyed.Ali, "Using and Transfering of Graphical File in CAD/CAM/CAE/Systems", , 2006 Sep vol. , no. 41, , 2006.

JAMSHIDI HASSAN ، SADOUGH VANINI Seyed.Ali, "Investigation of creep feed grinding parameters and heat treatment effects on the nickel-base superalloys", Transactions of Materials and Heat Treatment, 2005 Aug vol. 25, no. 5, , 2005.

SADOUGH VANINI Seyed.Ali, "Metalization of polymer/copper on cyclotene", Estghlal J of Isphan Industrial University, 2003 Aug vol. , no. 1, , 2003.

SADOUGH VANINI Seyed.Ali, "Metalization of polymer/copper on cyclotene", , 2003 Jan vol. , no. , , 2003.

SADOUGH VANINI Seyed.Ali, "Interfacial adhesion enhancement of sputter-deposited copper onto dow cyclotene 3022", , 2002 Jun vol. , no. , , 2002.

SADOUGH VANINI Seyed.Ali, "Copper clusters formation and stability on benzocyclobutene", , 2002 Mar vol. , no. , , 2002.

SADOUGH VANINI Seyed.Ali, "Surface modification by Ion implantation of 304 stainless steel ,orthopedic implants .part 1", , 2002 Mar vol. 0, no. 49, , 2002.

SADOUGH VANINI Seyed.Ali ، D.Q YANG ، L. MARTINU ، E. SACHER, "The adhesion of evaporated copper to dow cyclotene 3022 ,determined by microscratch testing", Journal of Adhesion Science and Technology, 2001 Dec vol. , no. , , 2001.

SADOUGH VANINI Seyed.Ali, "Surface modification of a polymer to enhane metal/polymer interface taughness", , 2001 Dec vol. 0, no. 48, , 2001.

100

SADOUGH VANINI Seyed.Ali ، D.Q YANG ، L. MARTINU ، E. SACHER, "Nitrogen plasma treatment of the dow cyclotene 3022 surface and its reaction with evaporated copper", Applied Surface Science, 2001 Jun vol. , no. , , 2001.

101

SADOUGH VANINI Seyed.Ali, "Chemical composition, chemical states and resistance to localized corrosion of passive film on the nitrogen and molybdenum implanted austenitic stainless", , 2000 Oct vol. 0, no. 0, , 2000.

102

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Effect of grain size and prestraining on the sheet metal formability limits", , 2000 Oct vol. , no. , , 2000.

103

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Teoretical and experimental analysis of sheet metal formability limits", La Revue Metallurgie, 2000 May vol. 0, no. 0, , 2000.

104

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Analysis experimengal et theorrique de la limite de formage des toles metalliques", , 2000 Mar vol. 0, no. 0, , 2000.

105

SHAKERI MAHMOUD ، SADOUGH VANINI Seyed.Ali ، MOLLAEI DARIANI BIJAN, "Optimal blank holder force in the deep drawing process", , 2000 Mar vol. , no. , , 2000.

106

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Effect of pre-straining and grain size on the limit strains in sheet metal forming", , 2000 Jan vol. , no. , , 2000.

107

SADOUGH VANINI Seyed.Ali, "Chemical composition, chemical states and resistance to localized corrosion of passive film on the nitrogen and molybdenum containing stainless steels", , 1995 Jan vol. 0, no. 27, , 1995.

108

SADOUGH VANINI Seyed.Ali ، P Lehr, "Comportement en fatigue oligocylique de p, aceir inoxydable Z3CN18-10 a er- 196 deg,es", La Revue Metallurgie, 1994 May vol. 0, no. 0, , 1994.

109

SADOUGH VANINI Seyed.Ali, "Surface enrichment of nitrogen during passivation of austenitic stainless", , 1994 Jan vol. , no. , , 1994.

110

SADOUGH VANINI Seyed.Ali, "Surface enrichment of nitrogen during passivation of austenitic steels", , 1994 Jan vol. 0, no. 26, , 1994.

111

SADOUGH VANINI Seyed.Ali ، J Paudouard ، P Marcus, "The role of nitrogen in the passivity of austenitic stainless steel", Corrosion Science, 1994 Jan vol. , no. , , 1994.

112

SADOUGH VANINI Seyed.Ali ، P Lehr, "Low cycle fatigue behavior of 18% cr 10% ni stainless steel(304L) at room and liquid nitrogen tempratures", , 1994 Jan vol. 0, no. 0, , 1994.

113

ADIBI NAZGOL ، FARAJI GHOLAMREZA ، SADOUGH VANINI Seyed.Ali ، RAHMANIAN MASOUD, "Spherodisation phenomena in boiler tubes", , 1994 Jan vol. , no. , , 1994.

114

SADOUGH VANINI Seyed.Ali, "Investigation of martensite transformation induced by plastic deformation on an austenitic stainless steel using XRD and OM methods", , 1991 Jan vol. 0, no. 17, , 1991.

Conference Papers

SALARI ERFAN ، Fatemeh ghasemi ، SADOUGH VANINI Seyed.Ali, "Snap-through instability behavior of thermally preloaded graded nanobeams with porosities,", ISME2020, May 2020.

Fatemeh ghasemi ، SALARI ERFAN ، SADOUGH VANINI Seyed.Ali, "Nonlocal nonlinear thermal bending and postbuckling analysis of FG porous nanobeams,", ISME2020, May 2020.

ASHOORI ALIREZA ، SALARI ERFAN ، SADOUGH VANINI Seyed.Ali, "A thermo-electro-mechanical vibration analysis of size-dependent functionally graded piezoelectric nanobeams,", 9TH INTERNATIONAL CONFERENCE ONHIGH TEMPERATURE CERAMICMATRIX COMPOSITES - HTCMC 9, Jun 2016.

SALARI ERFAN ، ASHOORI ALIREZA ، SADOUGH VANINI Seyed.Ali, "Vibration analysis of higher-order shear deformable functionally graded beams with porosities,", 9TH INTERNATIONAL CONFERENCE ONHIGH TEMPERATURE CERAMICMATRIX COMPOSITES - HTCMC 9, Jun 2016.

TAHERKHANI ALI ، ZAREI MAHMOUDABADI MOHSEN ، SADOUGH VANINI Seyed.Ali, "An experimental study of density and thickness on mechanical behavior of hard polyurethane foams,", 24th Annual International conference on mechanical engineering ISME2016, Apr 2016.

naser kordani ، SADOUGH VANINI Seyed.Ali, "Investigating the resistance of impregnated with the shear thickening fluid,", Nanostructure and graphon conference, May 2015.

naser kordani ، SADOUGH VANINI Seyed.Ali ، H. Salarian ، M. Hosseiny ، V.gil, "Analyzing the Quasi-static Puncture Resistance Performance,", Development of engineering sciences, May 2015.

naser kordani ، SADOUGH VANINI Seyed.Ali, "Analyzing the Quasi-static Puncture Resistance Performance of Shear Thickening Fluid,", Nanostructrues and graphon conference, May 2015.

DAAVARI MORTEZA ، SADOUGH VANINI Seyed.Ali ، Gholamali Ashouri, "Comparison between effectiveness of ultrasonic peening on fatigue and corrosion fatigue behavior of welded steel pipe,", 3rd international engineering materials and metallurgy conference, Nov 2014.

DAAVARI MORTEZA ، SADOUGH VANINI Seyed.Ali, "Investigation the effects of ultrasonic impact treatment on corrosion fatigue behavior of high temperature A106-B steels,", 2th local conf. weld engineering, Oct 2014.

KAMI ABDOLVAHED ، SADOUGH VANINI Seyed.Ali ، MOLLAEI DARIANI BIJAN, "An Investigation on the Effect of Age Hardening on the Formability of 7075 Aluminum Alloy,", 22nd Annual International Conference on Mechanical Engineering, Apr 2014.

TAHERKHANI ALI ، ZAREI MAHMOUDABADI MOHSEN ، SADOUGH VANINI Seyed.Ali ، SADIGHI MOJTABA, "High velocity impact behavior of elastomeric foams,", ISME2014, Apr 2014.

Mohammad Jafarpour Alamdari ، TAHERKHANI ALI ، HEDAYATI REZA ، SADIGHI MOJTABA ، SADOUGH VANINI Seyed.Ali, "Numerical investigation of energy absorption capacity of metallic foam-filled tubes,", (ICMEM13), Aug 2013.

HEDAYATI REZA ، SADOUGH VANINI Seyed.Ali ، JAFARPOOR ALAMDARI MOHAMAD, "Investigation of Bird Strike on Different Spots of Airplane Stabilizer Using LS-DYNA,", 2nd International Conference on Mechanical Engineering and MechatronicsToronto, Ontario, Canada, August 8-9 2013, Aug 2013.

JAFARPOOR ALAMDARI MOHAMAD ، TAHERKHANI ALI ، HEDAYATI REZA ، SADIGHI MOJTABA ، SADOUGH VANINI Seyed.Ali, "Numerical Investigation on Energy Absorption Capacity of Metallic Foam-Filled Tubes,", 2nd International Conference on Mechanical Engineering and MechatronicsToronto, Ontario, Canada, August 8-9 2013, Aug 2013.

ADIBIPOUR REZVAN ، SADOUGH VANINI Seyed.Ali ، KORDANI NASER, "Application of Modified Halpin-Tsai Equation in Nanocomposite Reinforced Carbon Nanotubes,", 2nd International Conference on Mechanical Engineering and MechatronicsToronto, Ontario, Canada, August 8-9 2013, Aug 2013.

ADIBIPOUR REZVAN ، SADOUGH VANINI Seyed.Ali ، KORDANI NASER, "Modeling reinforced polymer by carbon nanotubes for prediction of elastic modul,", The first national conference on building new facilities, Feb 2013.

FARTASHVAND VAHID ، ABDULLAH AMIR ، SADOUGH VANINI Seyed.Ali ، ABEDINI REZVAN, "Acoustic field of ultrasonic transducer in air,", ISAV 2012, Dec 2012.

Salehi Manouchehr ، ، SADOUGH VANINI Seyed.Ali, "Buckling analysis of multilayer composite curved panel with embedded shape memory alloy,", The 3rd International Conference on Composites:Characterization, Fabrication and Application, Dec 2012.

SADOUGH VANINI Seyed.Ali ، JABBARI GULLIJA AMIN ، KORDANI NASER, "Mechanical Characteristics of Nanoceramic/Metal Laminated composite in the Impact Test,", Les Journes Spcialises Rfractaires 2012, Nov 2012.

JABBARI GULLIJA AMIN ، SADOUGH VANINI Seyed.Ali ، KORDANI NASER, "Microstructure and Fracture Behavior of Alumina/Silicon Carbide Nano Ceramic,", Les Journes Spcialises Rfractaires 2012, Nov 2012.

SADOUGH VANINI Seyed.Ali ، JABBARI GULLIJA AMIN ، MOLLAEI DARIANI BIJAN, "Near Liquidus Rheology of Semi?Solid Al?Si Alloy,", JA2012, Oct 2012.

JABBARI GULLIJA AMIN ، SADOUGH VANINI Seyed.Ali ، MOLLAEI DARIANI BIJAN, "Rheological Model of Semi-Solid Al-Si Alloy in Thixoforming,", JA2012, Oct 2012.

SADOUGH VANINI Seyed.Ali ، ADIBIPOUR REZVAN ، KORDANI NASER, "A new modeling for prediction of elastic mechanical properties of nanocomposites,", 10th international seminar on polymer science and technology, Oct 2012.

MOROVVATI MOHAMMAD REZA ، Atefeh Alimadadi ، SADOUGH VANINI Seyed.Ali ، KORDANI NASER, "Grafting of Poly [1-(N,N-bis-carboxymethyl)amino-3-allylglycerolCodimethylacrylamide] Copolymer onto Nano Graphite Support for Preconcentration and Determination of Ephedrine in Human Plasma and Biological Samples,", 3rd International conference on Nanotechnology: Fundamentals and Applications, Oct 2012.

PUYA FAR VAHID ، SADOUGH VANINI Seyed.Ali ، HOSSEINIYEKTA FARZAD ، JABBARI GULLIJA AMIN, "HIGH TEMPERATURE FLOW BEHAVIOUR OF SEMI-SOLID STEEL ALLOYS,", 12th International Conference on Semi-Solid Processing of Alloys and Composites October 2011, Cape Town, South Africa, Oct 2012.

SADOUGH VANINI Seyed.Ali ، JABBARI GULLIJA AMIN ، PUYA FAR VAHID, "Characterizing Rheology of Semi-Solid A356 Aluminum Alloy at Low Solid Fractions,", 51st Annual Conference of Metallurgists COM2012, Sep 2012.

SADOUGH VANINI Seyed.Ali ، ، KORDANI NASER ، SARMADIAN MOSTAFA, "Experimental Study on Fracture Toughness of Functionally Graded Steels,", 51st Annual Conference of Metallurgist COM2012, Sep 2012.

SADOUGH VANINI Seyed.Ali ،, "Two-dimensional sliding frictional contact of functionally graded Steels (FGS),", 51st Annual Conference of Metallurgist COM2012, Sep 2012.

KORDANI NASER ، SADOUGH VANINI Seyed.Ali, "Microscopic Activation Energies for Some Typical Surface Atoms by Study on Atomistic Model,", 3rd International conference on Nanotechnology: Fundamentals and Applications, Aug 2012.

KORDANI NASER ، SADOUGH VANINI Seyed.Ali, "Simulation of Anisotropic Wet Etching by Study on Atomistic Model,", Proceedings of the 3rd International Conference on Nanotechnology: Fundamentals and ApplicationsMontreal, Quebec, Canada, 7-9 August 2012, Aug 2012.

KORDANI NASER ، SADOUGH VANINI Seyed.Ali ، ASADI ALI ، JABBARI GULLIJA AMIN, "Fracture Behavior of Alumina/Silicon Carbide Nano Ceramic,", 3rd International conference on Nanotechnology: Fundamentals and Applications, Aug 2012.

KORDANI NASER ، SADOUGH VANINI Seyed.Ali ، ASADI ALI, "Angle of the failure Cone of Nanoceramic/metal Laminated Composite in the Impact Test,", 3rd International conference on Nanotechnology: Fundamentals and Applications, Aug 2012.

KORDANI NASER ، SADOUGH VANINI Seyed.Ali ، SADIGHI MOJTABA, "INVESTIGATION OF MECHANICAL BEHAVIOR OF NANOCOMPOSITE UTILIZING CARBON NANOTUBES,", Mechanics of Nano, Micro and Macro Composite Structures, Jun 2012.

KORDANI NASER ، SADOUGH VANINI Seyed.Ali ، BAKHTIARI NEJAD FIROOZ ، SAMAREH SALAVATI POUR HADI, "OPTIMIZATION OF NATURAL FREQUENCY OF THE COMPOSITE CONE STRUCTURE LAYERS,", Mechanics of Nano, Micro and Macro Composite Structures, Jun 2012.

SADOUGH VANINI Seyed.Ali ، ، SARMADIAN MOSTAFA, "Assessment of critical J-integral of functionally graded steels with charpy specimen notch under impact loading,", ISME2012, May 2012.

، SADOUGH VANINI Seyed.Ali ، ، Majid Rastgoo, "Mechanical Behavior Investigation Of Austenitic Functionally Graded Steels Utilizing The Hopkinson Pressure Bar In Charpy Impact Test,", ISME2012, May 2012.

TAVAKOLKHAH VAHID ، FARTASHVAND VAHID ، ABDULLAH AMIR ، SADOUGH VANINI Seyed.Ali, "Mechanical Properties and Surface Quality of Graphite-Polyethylene Composite produced by Friction-Agitation-Heat process,", 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Dec 2011.

SADOUGH VANINI Seyed.Ali ، HABIBOLAHIAN MOHAMMAD ، FARTASHVAND VAHID, "Effect of Precipitation hardening on formability of 2024 Aluminum alloy,", ISME2011, Dec 2011.

NASEHI MOHAMMADHOSSEIN ، SADOUGH VANINI Seyed.Ali, "Narrow gap Welding,", ISME2011, Dec 2011.

PASHAJAVID BABAK ، SADOUGH VANINI Seyed.Ali, "Mathematical Analysis of Mechanical Vibration Absorber Piezoelectric and SMA,", ISAV2011, Dec 2011.

KORDANI NASER ، SADOUGH VANINI Seyed.Ali ، ALIZADEH VAGHASLOO YOUNES ، Naser dashtiani grami ، SAMAREH SALAVATI POUR HADI, "Study of Carbon Nanotube type on Mechanical properties - Vibration of (Epoxy/CNT) Nanocomposite,", ISAV2011, Dec 2011.

SADOUGH VANINI Seyed.Ali ، KORDANI NASER ، Naser Dashtyani gerami ، NAZEMIZADEH MOSTAFA, "Effect of CNT in Mechanical Behavior of nano composites,", 1st conference on mechanical engineering islamic azad university abhar branch nov 2011, Nov 2011.

HOSSEINIYEKTA FARZAD ، SADOUGH VANINI Seyed.Ali ، PUYA FAR VAHID ، JABBARI GULLIJA AMIN, "The Rheological Behavior of HS6-5-2 Tool Steel For Non-Isothermal Processing,", 12th International Conference on Semi-Solid Processing of Alloys and Composites, Oct 2011.

PUYA FAR VAHID ، SADOUGH VANINI Seyed.Ali ، HOSSEINIYEKTA FARZAD ، JABBARI GULLIJA AMIN, "The Influence of Reheating Profile on the Final Microstructure of the Semi-Solid S600 and K100 Tool Steels,", 12th International Conference on Semi-Solid Processing of Alloys and Composites, Oct 2011.

HOSSEINIYEKTA FARZAD ، SADOUGH VANINI Seyed.Ali ، PUYA FAR VAHID ، JABBARI GULLIJA AMIN, "FLOW BEHAVIOUR OF M2 STEEL ALLOY DURING SEMI SOLID ISOTHERMAL RAPID COMPRESSION,", 12th International Conference on Semi-Solid Processing of Alloys and Composites, Oct 2011.

SADOUGH VANINI Seyed.Ali ، M. M. A. MOSHIZI ، SAMAREH SALAVATI POUR HADI ، ABOLPOUR MASHIZI SAJAD, "Nonlinear Solution of Circular Composite Plates with Piezoelectric Layers Utilizing Third-Order Shear Deformation Theory,", ASC 26th Technical Conference/Second Joint US-Canada Conference on Composites, Sep 2011.

SADOUGH VANINI Seyed.Ali ، KORDANI NASER ، N. D. GERAMI, "Effect of Carbon Nanotubes on Mechanical Properties of Polymer Matrix,", The 26th Technical Conference/Second Joint US-Canada Conference on Composites - ASC, Sep 2011.

SADOUGH VANINI Seyed.Ali ، PAZOKI MAHDI, "Large Deformation of Smart Functionally Graded Beams under Thermal Loadings,", The 26th Technical Conference/Second Joint US-Canada Conference on Composites - ASC, Sep 2011.

MOROVVATI MOHAMMAD REZA ، SADOUGH VANINI Seyed.Ali ، SADEGHI SEYEDNIMA, "Buckling of Generally Anisotropic Sandwich Shells,", The 26th Technical Conference/Second Joint US-Canada Conference on Composites - ASC, Sep 2011.

SADOUGH VANINI Seyed.Ali ، KAMI ABDOLVAHED, "Theoretical and Experimental Investigation of a Shape Memory Alloy/Elastomer Composite Actuator,", The 26th Technical Conference/Second Joint US-Canada Conference on Composites - ASC, Sep 2011.

SADOUGH VANINI Seyed.Ali ، ALIZADEH VAGHASLOO YOUNES ، ، GHANBARZADEH ALI, "Investigation of Strain Rate and Temperature Effects on the Mechanical Behavior of Functionally Graded Steels,", The 26th Technical Conference/Second Joint US-Canada Conference on Composites - ASC, Sep 2011.

SADOUGH VANINI Seyed.Ali ، ASADI ALI ، JABBARI GULLIJA AMIN, "Heat Treatment of Al2O3-SiC-MgO Nanocomposite ceramic and Optimizing Fracture Performance,", The 26th Technical Conference/Second Joint US-Canada Conference on Composites - ASC, Sep 2011.

HOSSEINIYEKTA FARZAD ، PUYA FAR VAHID ، SADOUGH VANINI Seyed.Ali, "Wire drawing process and comparison the analytical methods with finite element,", Journes Annuellesde la SF2M 2011, Jul 2011.

ASADI ALI ، SADOUGH VANINI Seyed.Ali, "A stress Wave Propagation Analysis of Lightweight Composites,", The 2th International Conference on CompositesCharacterization, Fabrication and Application (CCFA2)2, Dec 2010.

SADOUGH VANINI Seyed.Ali ، JEDARI SALAMI SATTAR, "Comparative Analysis of Dynamic Coefficients for Structural foams (EPP & Pu) under Low- Velocity Impact,", CellMat 2010, Oct 2010.

SADOUGH VANINI Seyed.Ali ، RASH AHMADI SAMRAND ، SHAKERI MAHMOUD, "Crack propagation in thin coatings subjected to contact loading using dislocation method,", MATERIAUX 2010, Oct 2010.

SADOUGH VANINI Seyed.Ali ، PUYA FAR VAHID, "Microstructural and Mechanical Properties of Back Ward Extruded Al356 Alloy in Semisolid State,", S2P2010, Sep 2010.

SADOUGH VANINI Seyed.Ali ، PUYA FAR VAHID, "The Investigation of Rheological Behavior, of A356 in Semisolid State Using Backward Extrusion Process,", S2P2010, Sep 2010.

SADOUGH VANINI Seyed.Ali ، ASADI ALI ، FARROKHI ARASH, "Physical and Mechanical Properties Optimization of Al2O3-SiC With Small Amount of MgO,", Twelfth European Inter-Regional Conference on Ceramics - CIEC 12, Sep 2010.

PUYA FAR VAHID ، SADOUGH VANINI Seyed.Ali ، HOSSEINIYEKTA FARZAD, "Design of experiments for determination of the influence of different parameters on the mechanical properties of semi-solid extruded parts,", S2P2010, Sep 2010.

SADOUGH VANINI Seyed.Ali ، PUYA FAR VAHID, "Numerical Simulation and Experimental Investigation of Rheological Behavior of Semi-Solid A356 Alloy Using Backward Extrusion,", S2P2010, Sep 2010.

SADOUGH VANINI Seyed.Ali ، PUYA FAR VAHID, "The effect of Temperature on Microstructure and Mechanical Propertiesof an A356 Aluminium Alloy in the Semi-Solid state using Back-Extruded process,", SF2M Annual Meeting - JA2010, Jun 2010.

RASH AHMADI SAMRAND ، SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD, "Stress distribution in thin coatings subjected to cylindrical contact loading,", SF2M Annual Meeting - JA2010, Jun 2010.

RASH AHMADI SAMRAND ، SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD, "Investigation of the coated system with crack normal to surface subjected to contact loading,", SF2M Annual Meeting - JA2010, Jun 2010.

RASH AHMADI SAMRAND ، SADOUGH VANINI Seyed.Ali, "Experimental method for repairing damaged turbine rotors using tempering heat treatment process,", SF2M Annual Meeting - JA2010, Jun 2010.

AKBARZADEH SHAFAROUDI ABDOL HAMID ، KOMEILI AMIN ، SADOUGH VANINI Seyed.Ali ، ESLAMI MOHAMMAD REZA, "VIBRATION CHARACTERISTICS OF SHAPE MEMORY ALLOY COMPOSITE PLATES,", ICCS1515th International Conference on Composite StructuresFaculdade de Engenharia da Universidade do Porto, Mar 2010.

AKBARZADEH SHAFAROUDI ABDOL HAMID ، KOMEILI AMIN ، ، SADOUGH VANINI Seyed.Ali ، ESLAMI MOHAMMAD REZA, "Vibration Analysis of Functionally Graded Plate under Dynamic Mechanical Loadinng,", CIMSC 091st International Conference on Composite Materials and structures, Nov 2009.

ALIKHANI ALIREZA ، SADOUGH VANINI Seyed.Ali, "Modeling control and simulation of a new large scale cable driven robot,", Aug 2009.

SHAYAN MOHSEN ، SADOUGH VANINI Seyed.Ali ، AREZOO BEHROOZ, "Computer aided etching simulation using cellular automata method,", 11th annual conference YUCOMAT 2009 Herceg-Novim August 31-September 4,2009, Aug 2009.

MIRSAEIDI MASOUD ، BIGLARI DR. FARID REZA ، SADOUGH VANINI Seyed.Ali ، BAGHERZADEH SAEED, "Optimum forging preform shape design by interpolation of boundary nodes,", Jul 2009.

HOSSEINI ZAD SEYED KASRA ، KOMEILI AMIN ، SADOUGH VANINI Seyed.Ali ، ESLAMI MOHAMMAD REZA, "Vibration Characteristics of Shape Memory Alloy Composite Plates,", 15th International Conference on Composites StructuresICCS15, Jun 2009.

SADOUGH VANINI Seyed.Ali ، PARHIZKAR GHAZANI HAMIN, "Artificial neural networks for fatigue life prediction of composites,", Jun 2009.

PAZOKI MAHDI ، SADOUGH VANINI Seyed.Ali ، SADOUGH VANINI ZAKIEH, "Deformation analysis of smart functionally graded beams under thermal loading,", JA2009 SF2M, Jun 2009.

HOSSEINIYEKTA FARZAD ، PUYA FAR VAHID ، SADOUGH VANINI Seyed.Ali, "Finite-difference solutions of a non-linear Schrodinger,", 11th WSEAS International Conference on Mathematical and Computational Methods in Science and Engineering, May 2009.

HABIBOLLAHI NAJAFABADI HOSSEIN ، SADOUGH VANINI Seyed.Ali, "Hysteresis identification and compensation in peizo actuator system by neural network,", May 2009.

JEDARI SALAMI SATTAR ، SADOUGH VANINI Seyed.Ali ، SADIGHI MOJTABA, "Determination of dynamic coefficients for structural expanded polypropylene EPP and poly urthane rigid PU foams under low velocity impact,", Mar 2009.

PUYA FAR VAHID ، HOSSEINIYEKTA FARZAD ، SADOUGH VANINI Seyed.Ali, "Investigation of microstructural changes in thixoforging of A17Si0.3Mg alloy,", Sep 2008.

PUYA FAR VAHID ، SADOUGH VANINI Seyed.Ali, "Investigation of microstructural changes in thixoforging of AL7Si0.3M Allooy,", Sep 2008.

SADOUGH VANINI Seyed.Ali ، SADIGHI MOJTABA, "Numerical and experimental study of mechanical behaviour for elastomeric EPDM foam and structural EPP foam under quasi static and impact loadings,", Jul 2008.

HOSSEINIYEKTA FARZAD ، PUYA FAR VAHID ، SADOUGH VANINI Seyed.Ali, "Simulation of backward thixoextrusion and investigation of temperature effect on flow behavior on semisolid state,", Jun 2008.

GHAFFARI TARI DARIUSH ، BIGLARI DR. FARID REZA ، MASHHADI KESHTIBAN PEYMAN ، SADOUGH VANINI Seyed.Ali, "Optimum bydroforming preform design by shape sensitivity analysis,", May 2008.

GHAFFARI TARI DARIUSH ، BIGLARI DR. FARID REZA ، SADOUGH VANINI Seyed.Ali ، MASHHADI KESHTIBAN PEYMAN, "Numerical optimisation of a two-layered X-shape hydroforming joint by finite element and response surface methodology,", Feb 2008.

PUYA FAR VAHID ، HOSSEINIYEKTA FARZAD ، SADOUGH VANINI Seyed.Ali, "Modeling the flow behavior of semisolid metals in thixoforming proccess,", Dec 2007.

HAGHI POORYA ، NARAGHI MAHYAR ، SADOUGH VANINI Seyed.Ali, "Adaptive position and attitude tracking of an AUV in the presence of ocean current disturbances,", Oct 2007.

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD, "Surface investigation and stress analysis of coated systems under contact loading using FEM modeling,", Sep 2007.

GHAFFARI TARI DARIUSH ، BIGLARI DR. FARID REZA ، SADOUGH VANINI Seyed.Ali, "Finite element simulation and parameter study of T shape tube hydroforming,", May 2007.

GHADAMI BADRLOO SIAMAK ، MAHDIEH NAJAFABADI ALIREZA ، MOLLAEI DARIANI BIJAN ، SADOUGH VANINI Seyed.Ali ، HOSSEINI ABARDEH REZA, "Investigation of ultrasonic assisted Upsetting process by FEM method,", Dec 2006.

ABBASZADEH ALI ، SADOUGH VANINI Seyed.Ali ، ESLAMI MOHAMMAD REZA, "Active control of piezo-FGM beams,", Nov 2006.

SIBOOYEH ALI ، AGAHI AMIR ، SHIRANI MEHDI ، SADOUGH VANINI Seyed.Ali ، ALIKHANI ALIREZA, "Box drawing modeling of two different contours; a square and a rectangular contour with experimental verification,", Nov 2006.

AGAHI AMIR ، SHIRANI MEHDI ، SADOUGH VANINI Seyed.Ali ، BIGLARI DR. FARID REZA, "A numerical and experimental investigation to the optimization of the thermoplastic reinforced sheet deep drawing,", Nov 2006.

SHIRANI MEHDI ، AGAHI AMIR ، SADOUGH VANINI Seyed.Ali ، BIGLARI DR. FARID REZA, "Experimental and analytical analysis of thermoplastic reinforced composite sheet deep drawing,", Nov 2006.

AGHAI AHMAD ، SHIRANI MEHDI ، SADOUGH VANINI Seyed.Ali, "a numerical experimental investigation to the optimizatiom of the thermoplastic reinforced sheet deep drawing,", Nov 2006.

SHIRANI MEHDI ، AGHAI AHMAD ، SADOUGH VANINI Seyed.Ali, "exprimental and analythical analysis of thermoplastic reinforced composite sheet deep drawing,", Nov 2006.

SHIRANI MEHDI ، AGHAI AHMAD ، SADOUGH VANINI Seyed.Ali, "Experimental study of thermoplastic reinforced composite sheet deep drawing,", Nov 2006.

SHIRANI MEHDI ، AGAHI AMIR ، SADOUGH VANINI Seyed.Ali ، BIGLARI DR. FARID REZA, "Experimental study of thermoplastic reinforced composite sheet deep drawing,", Nov 2006.

، ABBASSI ABBAS ، SADOUGH VANINI Seyed.Ali, "A Simulation model and parametric study of MED- TVC process,", EUROMED 06, Aug 2006.

SADOUGH VANINI Seyed.Ali ،, "Finite deformation of functionally graded plate under thermo- mechanical loadings,", Aug 2006.

SADOUGH VANINI Seyed.Ali ، BIGLARI DR. FARID REZA, "Reinforced thermoplastic sheet composite deep drawing investigation,", Aug 2006.

100

SADOUGH VANINI Seyed.Ali ، BIGLARI DR. FARID REZA, "Optimal blank design in thermoplastic reinforced sheet drawing using FEM,", Aug 2006.

101

YEILAGHI TAMIJANI ALI ، ، OHADI HAMADANI ABDOLREZA ، SADOUGH VANINI Seyed.Ali ، ESLAMI MOHAMMAD REZA, "Analytical vibration analysis of Functionally Graded material beams with bonded piezoelectric sensors and actuators,", Aug 2006.

102

SADOUGH VANINI Seyed.Ali ،, "Large Deformation of Functionally Graded Plate,", Aug 2006.

103

KHALILI SEYEDMAHDI ، SADOUGH VANINI Seyed.Ali, "Finite element analyses of two and three-dimensional crack problem in fiber metal laminated cylinder,", Aug 2006.

104

SADOUGH VANINI Seyed.Ali ،, "Vibration Analyzes of Functionally Graded Plate by Using of Boundary Element Method,", Aug 2006.

105

SADOUGH VANINI Seyed.Ali ، BIGLARI DR. FARID REZA ، SHIRANI MEHDI ، AGHAI AHMAD, "Reinforced thermoplatic sheet coposite deep drawing investigation,", Jun 2006.

106

FAZELI SAEED ، ABBASZADEH ALI ، SADOUGH VANINI Seyed.Ali, "On functionally graded beam with integrated surface shape memory alloy layer,", May 2006.

107

PUYA FAR VAHID ، HOSSEINIYEKTA FARZAD ، SADOUGH VANINI Seyed.Ali ، BIGLARI DR. FARID REZA ، ALIKHANI ALIREZA, "Analysis of the deformation behavior of semi-solid materials as porous media,", May 2006.

108

SADOUGH VANINI Seyed.Ali ، BIGLARI DR. FARID REZA ، SHIRANI MEHDI ، AGAHI AMIR, "Deep drawing simulation of thermoplastic reinforced composite sheet,", May 2006.

109

ALIKHANI ALIREZA ، NARAGHI MAHYAR ، SADOUGH VANINI Seyed.Ali, "Control the swing and position of a gantry crane with full state feedback control,", May 2006.

110

SADOUGH VANINI Seyed.Ali ، BIGLARI DR. FARID REZA ، AGAHI AMIR ، SHIRANI MEHDI, "Initial blank design in thermoplastic reinforced sheet drawing based on sensitivity analysis,", May 2006.

111

BAKHTIARI NEJAD FIROOZ ، SADOUGH VANINI Seyed.Ali ، SHOKROLLAHNIA ROSHAN MAJID, "Simulation and control of furnace temperature for obtaining temperature-time curve with computer,", Apr 2006.

112

SADOUGH VANINI Seyed.Ali ، BIGLARI DR. FARID REZA ، SHIRANI MEHDI, "New sheets drawing Simulation Composite Process,", Apr 2006.

113

SADOUGH VANINI Seyed.Ali ، BIGLARI DR. FARID REZA ، SHIRANI MEHDI ، AGAHI AMIR, "Sheet drawing Simulation of Thermoplastic Reinforced with synthetic fibers,", Apr 2006.

114

SADOUGH VANINI Seyed.Ali, "Comprehensive couplod field simulation of a compliant microactuator using nonlinear finite element analysis,", Mar 2006.

115

SADOUGH VANINI Seyed.Ali, "Stochastic estimation of microactuator backling,", Mar 2006.

116

SADOUGH VANINI Seyed.Ali ،, "Reduction of thermal stresses in thermal barrier coatings,", Oct 2005.

117

SADOUGH VANINI Seyed.Ali ، ALIKHANI ALIREZA ، SHAKERI MAHMOUD ، DANESH MEHR ALI REZA, "Active Reduction of vibration of the shell panel composites embedded with Piezoelectric Actuators,", Oct 2005.

118

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD ، RASH AHMADI SAMRAND, "Development of a model to predict the stresses in thin coatings induced by a scratch indenter for two elastic layers system,", Oct 2005.

119

MASAFY SAAID ، SADOUGH VANINI Seyed.Ali, "Effect of martensite induced plasticity on sheet formability of stainless steel,", May 2005.

120

، SADOUGH VANINI Seyed.Ali, "A Transient simulation model for A CAE model for,", Mar 2005.

121

SADOUGH VANINI Seyed.Ali ، L. MARTINU, "Measurement and improvement of the adhesion inthe copper/polymer interface,", Nov 2004.

122

JAMSHIDI HASAN ، SADOUGH VANINI Seyed.Ali, "Investigation of creep feed Grinding parameters and Heat treatmant Effects on The Nickel _ base saperallogs,", Oct 2004.

123

SADOUGH VANINI Seyed.Ali ،, "A CAE model for lnvestigotion of materials temperature variation lnside the vehicle,s compartnant,", Oct 2003.

124

SADOUGH VANINI Seyed.Ali ، RASH AHMADI SAMRAND ، RAZAVI SEYED ALIREZA, "Theoretical and experimental analysis of hot spoting surface hea treatment of urbine rotors,", Oct 2003.

125

MOLLAEI DARIANI BIJAN ، SADOUGH VANINI Seyed.Ali, "The effect of martensite transformation induced by plastic deformation on the stainless steels formability limits,", Mar 2003.

126

SADOUGH VANINI Seyed.Ali, "Microscratch analysis of enhanced adhesion of copper film to polymer,", Sep 2002.

127

SADOUGH VANINI Seyed.Ali, "Surface modification of Dow Cyclotene 3022 for enhanced adhesion of copper overlagers,", Oct 2001.

128

SADOUGH VANINI Seyed.Ali ، L. MARTINU ، E. SACHER, "Surface modification of dow cyclotene 3022 for enhanced adhension of copper over layers,", Mar 2001.

129

SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN ، SADOUGH VANINI Seyed.Ali, "Forming Limit Diagram Of Metal Computational Method,", Mar 2001.

130

SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN ، SADOUGH VANINI Seyed.Ali, "Formaing Limit Diagram of metal sheet in actual strain respect to forming process .,", Mar 2001.

131

SADOUGH VANINI Seyed.Ali ، D.Q YANG ، L. MARTINU ، E. SACHER, "The Adhesion of Deposited Copper To Dow Cyclotene 3022, as Determined by Microscratch Testing,", Feb 2001.

132

SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN ، SADOUGH VANINI Seyed.Ali, "Forming limit diagram of metal sheet In actual strain path with respect to forming process,", Jan 2001.

133

L. MARTINU ، M. Meunier ، K. Piyakis ، S. Poulin ، S. Rodrigues ، E. SACHER ، SADOUGH VANINI Seyed.Ali ، D.J. Smith ، D.Q YANG, "Cluster Formation Of Copper Deposited onto Treated and Untreated Dow Cyclotene 3022 E Grswold,", Oct 2000.

134

SADOUGH VANINI Seyed.Ali, "The Resistance to Localized Corrosion in Acidic_Chloride Medium. Of a 304_Type Stainless Steel Co_Implanted with Nitrogen_Molybdenum,", Jun 2000.

135

SHAKERI MAHMOUD ، SADOUGH VANINI Seyed.Ali ، MOLLAEI DARIANI BIJAN, "Influence of Grain Size and Sheet Thickess on the Low Carbon Steel Sheet Formability Limits,", Oct 1999.

136

MOLLAEI DARIANI BIJAN ، SHAKERI MAHMOUD ، SADOUGH VANINI Seyed.Ali, "Theoretical study of sheet metal formability (second part),", Feb 1999.

137

MOLLAEI DARIANI BIJAN ، SHAKERI MAHMOUD ، SADOUGH VANINI Seyed.Ali, "Experimental study of sheet metal formability (first part),", Feb 1999.

138

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Effect of grain size and prestraining on the sheet metal formalaility limits,", Oct 1998.

139

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Analysis Experimental ET theorique De formage des toles metalliques .,", Sep 1998.

140

SHAKERI MAHMOUD ، SADOUGH VANINI Seyed.Ali ، MOLLAEI DARIANI BIJAN, "Theoretical and experimental sensitivity analysis of sheet metal formability Limits .,", Sep 1998.

141

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Effect of prestraining on forming limit diagrams of low carbon steel,", Jul 1998.

142

SADOUGH VANINI Seyed.Ali ، SHAKERI MAHMOUD ، MOLLAEI DARIANI BIJAN, "Influence of grain refining annealing on the low carbon steel formability limits,", Mar 1998.

143

MOLLAEI DARIANI BIJAN ، SHAKERI MAHMOUD ، SADOUGH VANINI Seyed.Ali, "Technique for determining forming limit diagram in sheet metals formability,", May 1996.

144

SADOUGH VANINI Seyed.Ali ، SOLTANKHAH BIDOKHTI FARAMARZ, "The effect of alloy making method in mechanical behavior of powder metallurgy steels,", Jan 1996.

145

SADOUGH VANINI Seyed.Ali ، MAHDAVY JAVAD, "The effect on pitting corrosion of Mo,N and W in austenitic stainless steels,", Dec 1995.

146

SADOUGH VANINI Seyed.Ali ، P Marcus, "Role of nitrogen in the passivity of austenitic stainless steels,", May 1995.

147

SADOUGH VANINI Seyed.Ali, "The effect on dissolution and passivation of ion implatation of nitrogen and molybdenum in austenitic stainless steels,", May 1995.

148

SADOUGH VANINI Seyed.Ali, "The resistance to localized corrosion and chemical composition of passive film in ausenitic stainless steels,", May 1995.

149

SADOUGH VANINI Seyed.Ali ، P Lehr, "Comportement en fatigue oligocylique de i,acier inoxydable Z3CN18-10 a 2o et-196 degr,es,", May 1994.

150

SADOUGH VANINI Seyed.Ali ، P Lehr, "Low cycle fatigue behavior of 18% Cr 10% Ni stainless steel (304L),", Jan 1994.

151

SADOUGH VANINI Seyed.Ali ، R. Chikhi ، P Marcus, "The role of nitrogen and molybdenum in the passivity of austenitic stainless steel,", Jan 1994.

152

ADIBI NAZGOL ، FARAJI GHOLAMREZA ، SADOUGH VANINI Seyed.Ali ، RAHMANIAN MASOUD, "Spherodisation phenomena in boiler tubes,", Jan 1994.

153

SADOUGH VANINI Seyed.Ali, "Role of nitrogen in the passivity of austenitic stainless steel second,", Jan 1994.

154

SADOUGH VANINI Seyed.Ali, ".Ionic implantation technic mechanical engineering department,", Jan 1992.

155

SADOUGH VANINI Seyed.Ali, "Stress corrosion cracking of austenitic stainless steels in refinery environments,", Oct 1991.

156

SADOUGH VANINI Seyed.Ali, "Low cycle fatigue behavior and strain induced martensitic transformation on an low carbon austenitic stainless steel at room and liquid nitrogen temperatures,", Jan 1991.

Taught Courses

Course title

Description

Headlines

Date

Advanced Heat Treatment

4042

Material Science Lab

4042

Science of Materials

4042

Seminar

4041

Seminar

4032

Mechanical Behavior of Materials

4031

Science of Materials

4031