IRAJ SATTARI FAR
Associate Professor
Department of Mechanical Engineering
(Emeritus)
Department of Mechanical Engineering
(Emeritus)
Download PDF فارسی
Content
Pepole
CV
Download PDF فارسی
Email:
sattari
aut.ac.ir
aut.ac.irPhone:
h-index (Scopus):
2
Citations (Scopus):
15
Supervised PhD Theses
#
Thesis title
By
Date
1
Fatigue analysis of the components containing residual stress by using fracture mechanics and continuum damage mechanics approaches
Mohammad Javad Attarha & Iraj Sattari Far
January 2024
2
Analysis of Fatigue Crack Growth in Residual Stresses Field
Mohammad Noghabi & Iraj Sattari Far
February 2023
Supervised MSc Theses
#
Thesis title
By
Date
1
Study on reduction of residual stresses in using TIG and LASER welfing processes
Ali Safarisouri & Iraj Sattari Far
February 2024
2
Determining the appropriate parameters in the design of Alvator bucket with the aim of increasing the transmission capacity
Zohreh Pourhamzeh & Iraj Sattari Far
October 2023
3
Development of a hybrid welding method in this sheets
Ali Abed Khosravi & Iraj Sattari Far
March 2023
4
Development of a method based on cooling or heating during welding (online cooling) in order to reduce welding residual stress in aluminum alloy 6061-T6
Hamed Hemmatpour & Iraj Sattari Far
March 2023
5
Investigation of ARCOR coating process on wear and corrosion resistance properties of 304 steel welded by stainless electrodes
Seyedehsan Mousavi Khoee & Iraj Sattari Far
March 2022
6
Welding Reinforcement Cold Work Effect to Create Compressive Residual Stresses
Reza Rostami & Iraj Sattari Far
October 2021
7
Compilation of friction stir welding technology in butt joint of ABS sheets
Mohammadsadegh Javadi & Iraj Sattari Far
October 2021
8
Performance of compressive residual stress by High Frequency Ultrasonic Impact method to improve fatigue strength in the weld zone
Mahshid Mahdiun & Iraj Sattari Far
October 2021
9
Failure analysis and remaining life estimation of a gas turbine disk under Fatigue and Creep Condition.
Mehdi Soleyman Nejad & Iraj Sattari Far
December 2020
10
Study on high- cycle fatigue on a high strength steel
Mohsen Faramarzi Tabar & Iraj Sattari Far
July 2020
11
Effect of residual stresses on the fracture toughness of titanium alloy
Pouya Mohammad Olfat & Iraj Sattari Far
May 2020
12
Fracture toughness prediction of ferritic steels in the transition region in the presence of residual stresses
Morteza Shahi & Iraj Sattari Far
December 2019
13
Residual stresses and HAZ simulation in welding of Nickel-base supperalloy considering phase transformations
Erfan Amini & Iraj Sattari Far
July 2019
14
Reliability evaluation of welded joint using lower transformation temperature fillers
Moeinadin Farsinejad Marj & Iraj Sattari Far
June 2019
15
Study on Effect of residual stresses on fatigue crack growth of titanium alloy
Amirmohammad Zangeneh Einaloo & Iraj Sattari Far
February 2019
16
study on non-destructive method in measuring residual stress with reasonable accuracy
Arman Mirzayimunesyar & Iraj Sattari Far
February 2018
17
optimization of a technology for active TIG welding of thick plates austenitic stainless steel
Omid Mohamadi & Iraj Sattari Far
February 2018
18
study on residual stresses in circumferential weding of two pipes and effects of thickness and heat input
Majid Hemmatzadeh & Iraj Sattari Far
February 2016
19
study on welding of the main nozzle in a welding plant reactor
Eiman Masoumi & Iraj Sattari Far
February 2016
20
study on shear strength of welds from friction stir lap welding in aluminum matrix composites
Hojjat Samarikhalaj & Iraj Sattari Far
November 2015
21
( Buckling Analysis on Welds in Pressure Vessels
Payam Seyedmonir & Iraj Sattari Far
October 2015
22
Study on residual stresses in welding by LTT fillers
Kaveh Azizpour & Iraj Sattari Far
October 2015
23
Study on the effect of warm pre-stressing (WPS) on brittle fracture behavior of cracked
Rasoul Ahmadi & Iraj Sattari Far
February 2015
24
Welding technology compilation for manufacturing of a cryogenic pressure vessel
Mahdi Karimimanesh & Iraj Sattari Far
October 2014
25
Partial Safety Factor Approach to Design of a pressure Vessel and Comparing the results With Classic Pressure Vessel Design Based on ASME Standard
Hadi Shokraneh & Iraj Sattari Far
October 2014
26
Study and determination of the maximum size of weld undercut defect according to standard and fracture mechanic calculation in an aluminum part
Farshid Jalali Moghadas & Iraj Sattari Far
September 2014
27
Study of welding frequence in reduction of weld defects in TIG welding of aluminum alloy
Salman Jafari & Iraj Sattari Far
August 2014
28
Design and manufacturing of a control system for resistance spot welding process
Nima Haghshenas & Iraj Sattari Far
February 2014
29
Evaluation mechanical properties of high strength aluminum alloy welded by friction stir welding(FSW)
Mohammad Javad Mohammadi Sefat & Iraj Sattari Far
February 2014
30
Investigation on cracking and delamination of cladded plates in head manufacturing
Mahmoud Afshari & Iraj Sattari Far
February 2014
31
Study of Crack Growth Initiation in 3PB Specimen Using Local Approach
Ahmad Mohammadi & Iraj Sattari Far
February 2014
32
Study of precision in Fatigue assessment of a fillet weld based on the four methods in the international institute of welding
Atabak Dindarsafa & Iraj Sattari Far
January 2014
33
study of the effects of arc cleaning method in resistance spot welding of aluminum alloys
Sajjad Mohseni & Iraj Sattari Far
September 2013
34
Development of application of ultrasonic method for measurement of residual stresses in butt weld joint
& Iraj Sattari Far
October 2012
35
Stress analysis of weld joints in stiffener rings in an aluminum cylinder and finding appropriate method for determining its fatigue strength
Amir Rasti & Iraj Sattari Far
October 2012
36
Final Element Analysis and Measurement of Residual Stress by Ultrasonic Method in Heat Affected Zone of a Wellded Connectin
& Iraj Sattari Far
September 2012
37
High frequency TIG welding technology for aluminum 5xxx series
& Iraj Sattari Far
February 2012
38
analysis and measurement of surface residual stress in a cylinder which is produced by flow forming process
Reza Mardanshahi & Iraj Sattari Far
February 2012
39
Study on welding residual stresses on high strength aluminum pressure vessels and development of relationships between residual stress and geometrical parameters
& Iraj Sattari Far
February 2012
40
Study of welding distortions and residual stresses in a welded thin-wall vessel of aluminum alloy of type 5000
& Iraj Sattari Far
November 2011
41
The effect of mismatch on mechanical properties and distortation welding in a welded vessel of high strenght aluminium alloy
Ali Ghasemi & Iraj Sattari Far
October 2011
42
The effect of welding sequences on welding distortion in an aluminium pressure vessel
& Iraj Sattari Far
October 2011
43
Study on distortion of welding nozzles to a large pressure vessel
Mohammad Najafi & Iraj Sattari Far
October 2011
44
Finite element analysis of welding residual stresses of a high strength aluminum alloy
Hadi Moein & Iraj Sattari Far
February 2011
45
Study on crack growth in welding residual stress field
Mohammad Amin Nasiri & Iraj Sattari Far
October 2010
46
Numerical and experimental analysis of resistance spot welding process
Hessamoddin Moshayedi & Iraj Sattari Far
September 2010
47
Study on the Effect of Post Weld Heat Treatment Parameters (Temperature - Time) and the Creep Behavior of Materials on the Distribution and Magnitude of Residual Stresses in a Welded Pipe Sample
Iman Akbarzadeh & Iraj Sattari Far
April 2010
48
FEM analysis of fusion Welds to determine a monitoring sysmtem for quality control of welds
Mohammad Javad Attarha & Iraj Sattari Far
January 2010
49
Prediction of Welding Residual Stress Considering Phase Transformation
Mohammad Hosein Zeinali & Iraj Sattari Far
September 2009
50
Study of the cutting conditions on residual stresses in the orthogonal cutting
Mohammad Mohammadpour & Iraj Sattari Far
March 2009
51
Detection defect and Analysis of Cylindrical vessel under Pressure usingTheoretical and Experimental Modal analysis
Mahdi Yoosefzad & Iraj Sattari Far
February 2009
52
Analysis on the Effect of Welding Sequence on Distortion
Farzad Ghanbari & Iraj Sattari Far
October 2008
53
THERMO-MECHANICAL STRESS ANALYSIS AND LIFE ASSESSMENT OF CYLINDER HEAD IN MEDIUM SPEED HEAVY DUTY DIESEL ENGINE
Hamid Reza Chamani & Iraj Sattari Far
May 2008
54
STUDY ON RESIDUAL STRESS AND STRESS RELIEF HEAT TREATMENT IN WELDED JOINT WITH USING FEM
Atefeh Ghalami & Iraj Sattari Far
October 2007
55
STUDY ON WELD DESIGN ON MAGNITUDE AND DISTRIBUTION OF WELDING RESIDUAL STRESS
Mohammadreza Najafabadi Farahani & Iraj Sattari Far
November 2006
56
ANALYSING AND MINIMIZING DISTORTION IN A WELDING STRUCTURE
Yashar Javadi & Iraj Sattari Far
October 2006
Journal Papers
Portal Records
1
Mohammad Javad Attarha, Iraj Sattari Far, "Comparison of the continuum damage and fracture mechanics in fatigue assessment of components containing residual stresses", MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, September 2023
Vol. 0,
Num. 0,
Page 1-19,
September 2023,
2
Amirmohammad Zangeneh Einaloo, Iraj Sattari Far, Mohammad Noghabi, "A Numerical and Experimental Study on Fatigue Crack Growth of Ti-6Al-4V
Specimens in Presence of Tensile Residual Stresses", , June 2023
Vol. 55,
Num. 4,
Page 543-554,
June 2023,
3
Mohammad Javad Attarha, Iraj Sattari Far, "Application of Continuum Damage Mechanics in Fatigue Assessment of A516 Steel Specimens Considering Residual Stresses", INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, June 2023
Vol. 0,
Num. 0,
Page 1-21,
June 2023,
4
Amirmohammad Zangeneh Einaloo, Iraj Sattari Far, محمد نوقابی, "The study on the influences of residual stresses on fatigue crack propagation in
titanium alloy specimens", journal of mechanical engineering and sciences, December 2022
Vol. 16,
Num. 4,
Page 9187-9196,
December 2022,
5
Mohammad Noghabi, Iraj Sattari Far, Hossein Hosseini Toudeshky, "The study on the overloading effect on fatigue crack growth considering residual stress relaxation in Al 5456-H38", MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, May 2022
Vol. 1,
Num. 1,
Page 1-20,
May 2022,
6
Mohammad Noghabi, Iraj Sattari Far, Hossein Hosseini Toudeshky, "Estimation of Fatigue Life in AI alloy Specimens Using FEA", , November 2021
Vol. 1,
Num. 1,
Page 56-71,
November 2021,
7
Mohammad Noghabi, Iraj Sattari Far, Hossein Hosseini Toudeshky, "The study of redistribution in residual stresses during fatigue crack growth", Journal of Mechanical Engineering and Sciences(JMES), November 2021
Vol. 15,
Num. 4,
Page 8565-8579,
November 2021,
8
Mahmoud Afshari, Alireza Fallahi Arezodar, Iraj Sattari Far, Amirhossein Alavi, "Effective Parameters on Cladded Plate Delamination During Pressure Vessels Head Manufacturing bY FEM and DOE", Turkish Journal of Computer and Mathematics Education, February 2021
Vol. 12,
Num. 14,
Page 1789-1801,
February 2021,
9
Mastaneh Moattari, Hessamoddin Moshayedi, Iraj Sattari Far, "Application of new constraint based Master Curve in fracture assessment of pressure vessels", INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, May 2019
Vol. 174,
Num. 0,
Page 25-31,
May 2019,
10
Kaveh Azizpour, حسام الدین مشیدی , Iraj Sattari Far, "Application of low transformation-temperature filler to reduce the residual stresses in welded component", journal of mechanical engineering and sciences, March 2019
Vol. 13,
Num. 1,
Page 4536-4557,
March 2019,
11
Eiman Masoumi, Hessamoddin Moshayedi, Iraj Sattari Far, Alireza Fallahi Arezodar, "Residual stresses due to cladding, buttering and dissimilar welding of the main feed
water nozzle in a power plant reactor", INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, May 2017
Vol. 152,
Num. 0,
Page 56-64,
May 2017,
12
Majid Hemmatzadeh Dastgerdi, Hessamoddin Moshayedi, Iraj Sattari Far, "Influence of heat input and radius to pipe thickness ratio on the residual stresses in circumferential arc welded pipes of API X46 steels", INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, January 2017
Vol. 150,
Num. 0,
Page 62-71,
January 2017,
13
Eiman Masoumi, Alireza Fallahi Arezodar, Iraj Sattari Far, "Numerical and Experimental Investigation of Layer Number Effect on Residual Stresses Cladding Process", , November 2016
Vol. 49,
Num. 4,
Page 839-850,
November 2016,
14
Mohammad Noghabi, Iraj Sattari Far, Hossein Hosseini Toudeshky, "The Effect of Fatigue Crack Growth on Mechanical Residual Stress Redistribution", , May 2016
Vol. 27,
Num. 2,
Page 1-10,
May 2016,
15
Mastaneh Moattari, Iraj Sattari Far, Nicola Bonora, "The effect of subcritical ductile crack growth on cleavage fracture probability in the transition regime using continuum damage mechanics simulation", THEORETICAL AND APPLIED FRACTURE MECHANICS, April 2016
Vol. 82,
Num. 0,
Page 125-135,
April 2016,
16
Mastaneh Moattari, Iraj Sattari Far, Italo Persechino, Nicola Bonora, "Prediction of fracture toughness in ductile-to-brittle transition region using combined CDM and Beremin models", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, March 2016
Vol. 657,
Num. 0,
Page 161-172,
March 2016,
17
Rasoul Ahmadi, Ahmad Mohammadi Najafabadi, Iraj Sattari Far, "Weibull Parameters Transformability of Local Approach to Fracture in Specimens of Different Shapes", , July 2015
Vol. 15,
Num. 5,
Page 185-192,
July 2015,
18
Amir Rasti, Iraj Sattari Far, Manouchehr Salehi,, "Stress analysis of welded joints in internal
stiffener rings in an aluminum cylinder", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, May 2015
Vol. 0,
Num. 0,
Page 1-10,
May 2015,
19
Ahmad Mohammadi, Iraj Sattari Far, Mohsen Rezaeian Akbarzadeh, "Calibration of Weibull Parameters of Local Approach to Fracture by Using Experimental Cleavage Fracture data of Three Point Bending Specimens", , April 2015
Vol. 15,
Num. 1,
Page 412-418,
April 2015,
20
Hessamoddin Moshayedi, Iraj Sattari Far, "Interaction of welding residual stresses and warm pre-stressing on brittle fracture of a pipe containing an internal semi-elliptical crack", ENGINEERING FAILURE ANALYSIS, March 2015
Vol. 52,
Num. 0,
Page 116-128,
March 2015,
21
Hessamoddin Moshayedi, Iraj Sattari Far, "The effect of welding residual stresses on brittle fracture in an internal surface cracked pipe", INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, January 2015
Vol. 126-127,
Num. 0,
Page 29-36,
January 2015,
22
Mahdi Karimimanesh, Iraj Sattari Far, Hamid Omidvar, "EFFECTS OF ARC HEAT INPUT AND WELDING SPEED ON THE CRYOGENIC IMPACT STRENGTH OF TYPE 304L AUSTENITIC STAINLESS STEEL WELD METAL", , January 2015
Vol. 15,
Num. 2,
Page 205-213,
January 2015,
23
Hessamoddin Moshayedi, Iraj Sattari Far, "Resistance spot welding and the effects of welding time and current on residual stresses", JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, May 2014
Vol. 214,
Num. 11,
Page 2545-2552,
May 2014,
24
Hadi Moein, Iraj Sattari Far, "Different finite element techniques to predict welding residual stresses in aluminum alloy plates", JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, February 2014
Vol. 28,
Num. 2,
Page 679-689,
February 2014,
25
Mohammad Najafi, , Iraj Sattari Far, "Decreasing welding distortions in penetration nozzles by applying proper welding sequences", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, May 2012
Vol. 226,
Num. 9,
Page 1519-1526,
May 2012,
26
Hessamoddin Moshayedi, Iraj Sattari Far, "Numerical and experimental study of nugget size growth in resistance spot welding of austenitic stainless steels", JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, January 2012
Vol. 212,
Num. 2,
Page 347-354,
January 2012,
27
Mohammadreza Farahani, Iraj Sattari Far, "Effects of residual stresses on crack-tip constraints", Scientia Iranica, December 2011
Vol. 18,
Num. 6,
Page 1267-1276,
December 2011,
28
Mohammad Javad Attarha, Iraj Sattari Far, "Study on welding temperature distribution in thin welded plates through experimental measurements and finite element simulation", JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, March 2011
Vol. 211,
Num. 4,
Page 688-694,
March 2011,
29
Iman Akbarzadeh, Iraj Sattari Far, Manouchehr Salehi, "Numerical and experimental study of the effect of short-term and long-term creep modeling in stress relaxation of a multi-pass welded austenitic stainless steel pipe", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, February 2011
Vol. 528,
Num. 4,
Page 2118-2127,
February 2011,
30
Iman Akbarzadeh, Mohammad Javad Attarha, Manouchehr Salehi, Iraj Sattari Far, "Numerical and experimental study of the effect of post-weld heat treatment parameters on the relaxation of welding residual stresses", JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, January 2011
Vol. 46,
Num. 0,
Page 0-0,
January 2011,
31
Hamid Reza Chamani, Iraj Sattari Far, Mohammad Mohammadi Aghdam, "A study on the thermal boundary condition effects on the distribution of temperature inside diesel engines", , February 2010
Vol. 5,
Num. 17,
Page 71-81,
February 2010,
32
Davood Akbari, Iraj Sattari Far, "Effects of the welding heat input on residual stresses in butt-welds of dissimilar pipe joints", INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, September 2009
Vol. 86,
Num. 11,
Page 769-776,
September 2009,
33
Iraj Sattari Far, Mohammadreza Farahani, "Effect of the weld groove shape and pass number on residual stresses
in butt-welded pipes", International Journal of Pressure Vessels and Piping, June 2009
Vol. 86,
Num. 11,
Page 0-0,
June 2009,
34
Rasoul Moharrami, Iraj Sattari Far, "Experimental and Numerical Study of Measuring High Welding Residual Stresses by Using The Blind Hole -Drilling Technique", , October 2008
Vol. ,
Num. 43,
Page 0-0,
October 2008,
35
Mohammadreza Farahani, Davood Akbari, Iraj Sattari Far, Dr. Farid Reza Biglari, "Effect of Weld Geometry On Residual Stress In Butt Welded Pipes", Amirkabir Journal of Sience and Technology, September 2008
Vol. 19,
Num. 0,
Page 37-44,
September 2008,
36
Iraj Sattari Far, Yashar Javadi, "Influence of welding sequence on welding distortions in pipes", INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, April 2008
Vol. 85,
Num. 4,
Page 265-274,
April 2008,
37
Dr. Farid Reza Biglari, Ali Reza Rezai Nasab, [en-name N/A], Iraj Sattari Far, "Finite Element Simulation of Dynamic Crack Propagation for Complex Geometris Without Remeshing", , September 2006
Vol. ,
Num. 0,
Page 0-0,
September 2006,
38
Iraj Sattari Far, L. Dahlberg, "Fracture assessment of a brittle reactor pressure vessel under cold loading approved to be appeared", , March 2004
Vol. ,
Num. ,
Page 0-0,
March 2004,
39
Iraj Sattari Far, Mohammad Moallemi, "Failure study of stainless digester shafts in a paper production plant", , December 2003
Vol. ,
Num. ,
Page 0-0,
December 2003,
40
Iraj Sattari Far, P. Dillstrom, "Finite element limit load solutions for surface cracks in plates and cylinders", , December 2003
Vol. ,
Num. ,
Page 0-0,
December 2003,
41
Iraj Sattari Far, "Failure study of connecting shafts of a plug screw feeder in a paper production plant", , June 2003
Vol. ,
Num. ,
Page 0-0,
June 2003,
42
Iraj Sattari Far, "Crack growth in cladded cruciform specimens under uniaxial and biaxial loading", , March 2003
Vol. ,
Num. ,
Page 0-0,
March 2003,
43
Iraj Sattari Far, "Procedures used in sweden for safety assessment of components with cracks", , December 2000
Vol. ,
Num. ,
Page 0-0,
December 2000,
44
Iraj Sattari Far, B. Brickstad., "Crack shape developments for LBB application", , December 2000
Vol. ,
Num. ,
Page 0-0,
December 2000,
45
Iraj Sattari Far, R.A. Ainsworth., A.H. Sherry, D.G. Hooton, I. Hadley, "Methods for including constraint effects within the SINTAP procedures", , December 2000
Vol. ,
Num. ,
Page 0-0,
December 2000,
46
Iraj Sattari Far, L. Dahlberg, "Pretest fracture assessment on the NESC-1 spinning cylinder under a PTS transient", , March 1998
Vol. ,
Num. ,
Page 0-0,
March 1998,
47
Iraj Sattari Far, "Constraint effects on behavior of surface cracks in cladded reactor pressure vessels subjected to PTS transients", , January 1996
Vol. ,
Num. ,
Page 0-0,
January 1996,
48
Iraj Sattari Far, "Constraint effects on ductile crack growth in cladded components subjected to uniaxial loading", , January 1995
Vol. ,
Num. 18,
Page 0-0,
January 1995,
49
Iraj Sattari Far, "Finite element analysis of limit loads for surface cracks in plates", , January 1994
Vol. ,
Num. ,
Page 0-0,
January 1994,
50
Iraj Sattari Far, "Finite element and experimental studies of crack growth in cladded SEN(B) specimens", , January 1994
Vol. ,
Num. ,
Page 0-0,
January 1994,
51
Iraj Sattari Far, "Stress intensity factors for circumferential through-thickness cracks in cylinders subjected to local bending", , January 1992
Vol. ,
Num. ,
Page 0-0,
January 1992,
Conference Papers
Portal Records
1
Mahshid Mahdiun, Iraj Sattari Far, Amir Abdullah, "Creating compressive residual stress by high frequency ultrasonic shock method ", 18th National Conference and 7th International Conference on Manufacturing Engineering, March 2022
2
Mohammad Javad Attarha, Iraj Sattari Far, "Developments in considering residual stresses in the fatigue assessments of welded structures ", IIW-2018 Assembly and Conference, July 2018
3
Mastaneh Moattari, Iraj Sattari Far, Hessamoddin Moshayedi, "Application of new constraint based Master Curve in fracture assessment of pressure vessels ", IIW-2018 Assembly and Conference, July 2018
4
Hessamoddin Moshayedi, Iraj Sattari Far, Mastaneh Moattari, "Application of Local Approach to Fracture for Integrity Assessment of Cracked Components in Presence of Preloads and Residual Stresses ", IIW-2018 Assembly and Conference, July 2018
5
Mohammad Noghabi, Iraj Sattari Far, Hossein Hosseini Toudeshky, "Using the J-integral to estimate the fatigue life of aluminum structures ", The 15th International Conference of the Iranian Aerospace Society, February 2016
6
Hadi Moein, Iraj Sattari Far, "Investigation of the Effect of Welding Energy and Preheat on Distribution of Residual Stresses in Inconet Alloy Plates ", Proceedings of the Canadian Society for Mechanical Engineering International Congress 2014, June 2014
7
Nima Jalili, Hassan Basirat Tabrizi, Iraj Sattari Far, "Effect of Simultaneous Cooling on Temperature Field in Friction Stir Welding Process of Aluminum Alloy ", Iran international conference of aluminum, May 2014
8
Ahmad Mohammadi, Mohsen Rezaeian Akbarzadeh, Iraj Sattari Far, "Statistical Analysis of the Experimental data on Behavior of Brittle Fracture Modeling Based on Local Approach ", Third International conference on Reliability Engineering, February 2014
9
Farshid Jalali Moghadas, Iraj Sattari Far, "comparison of different standard on acceptability of weld undercut defect size and acceptance limits at different quality levels ", 14th National Conference on Welding & Inspection, February 2014
10
Farshid Jalali Moghadas, Iraj Sattari Far, "study of the effect of geometric parameters of weld undercut defect on static strength of a weld structure by ABAQUS ", 14th National Conference on Welding & Inspection, February 2014
11
Nima Haghshenas, Iraj Sattari Far, Farshad Barazandeh, "Measuring Contact Resistance in Resistance Spot Welding ", 14th National Conference on Welding & Inspection (14th NCWI)
& 3rd National Conference on NDT (3rd NCNDT), February 2014
12
Mahmoud Afshari, Alireza Fallahi Arezodar, Iraj Sattari Far, "Evaluation effects of annealing on the mechanical properties of Roll-Bonded clad plates ", 1st Conference on Oil and Gas Storage Tanks, October 2013
13
, Hassan Basirat Tabrizi, Iraj Sattari Far, "Experimental and numerical investigation of heat transfer in friction stir welding process ", 21th Annual International Conference on Mechanical Engineering-ISME2013, May 2013
14
Amir Rasti, Iraj Sattari Far, Manouchehr Salehi, Hessamoddin Moshayedi, "Stress anlysis of welded internal ring-stiffened pressure vessel ", ISME2013, May 2013
15
, Mehdi Ahmadi Najafabadi, Iraj Sattari Far, "Residual stress measurement in aluminum plate joint weld by ultrasonic method ", National Symposium on Mechanical Engineering NCME 2013, March 2013
16
Hadi Moein, Iraj Sattari Far, "Investigation of the effect of welding energy and preheat on distribution of residual stresses n inconel alloy plates ", Proceedings of the ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis ESDA2012, July 2012
17
, Iraj Sattari Far, Alireza Fallahi Arezodar, Mohammad Reza Ranjbaraki, "Effects Of High Frequency Pulsed Current Tig (HF-PTIG) On Small Scale Welding Distortion Of Aluminum High Strength Alloys ", 20th Annual international Iranian Mechanical Engineering Conference – ISME2012, May 2012
18
, Iraj Sattari Far, Alireza Fallahi Arezodar, Mohammad Reza Ranjbaraki, "Microstructure refinement for improvement of metallurgical properties of Pulsed TIG welded joint with high frequency pulse technique ", 11th Conference of Iranian Aerospace Society, February 2012
19
Mohammad Najafi, Iraj Sattari Far, Dr. Farid Reza Biglari, Alireza Hosseinkhani, "Study effect of welding sequence on distortion in a Nazel to a pressure vessel ", 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), December 2011
20
, Iraj Sattari Far, Mehdi Akhlaghi, Mohammad Reza Ranjbaraki, "Study the effect of local chilling on decreasing welding distortions in a high-strength alluminium pressure vessel ", 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), December 2011
21
, Iraj Sattari Far, Mehdi Akhlaghi, Mohammad Reza Ranjbaraki, "Investigation of the Influence of Mechanical Clamping on the Reduction of Welding Distortions in an High Strength Aluminum Vessel ", 12th National Conference of Iran Welding and Inspection, December 2011
22
Ali Ghasemi, , Iraj Sattari Far, Dr. Farid Reza Biglari, "Study of fracture behavior in tensile test of spot welding using FEM ", International Conference on Manufacturing Engineering, December 2011
23
, Iraj Sattari Far, Alireza Fallahi Arezodar, Mohammad Reza Ranjbaraki, "Optimizition of HF-PTIG Welding Process Parameters For Improvment
Mechanical and Microstructure of High Strength Aluminum Alloys ", 3rd International and 12th National Conference on Manufacturing Engineering, December 2011
24
, Iraj Sattari Far, Alireza Fallahi Arezodar, Mohammad Reza Ranjbaraki, "The effect of HF-Pulsed TIG weling parameters on fusion weld metal microstructure of aluminum 5000 series ", 12th Conference of Iran Welding & Inspection, December 2011
25
Ali Ghasemi, Iraj Sattari Far, Mohsen Rezaeian Akbarzadeh, "Effect of misalignment on welding distortion in aluminium vessels using FEM ", International Conference on Manufacturing Engineering, December 2011
26
, , , Amir Abdullah, Iraj Sattari Far, "Modeling of Ultrasonic Effects on Residual Stresses of Welding ", 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), December 2011
27
, Amir Abdullah, Iraj Sattari Far, "Modeling of Ultrasonic Effects on Residual Stresses of Welding ", ISAV 2011, December 2011
28
, Iraj Sattari Far, Majid Mahmoodi Ghaznavi, ,, "Reduction of Welding Distortions With Reduction of Thermal Gradient in an Aluminum Vessel ", 12th National Conference of Iran Welding and Inspection, December 2011
29
Hessamoddin Moshayedi, Iraj Sattari Far, "Analytical Solution for Thermal Analysis of Resistance Spot Welding Process ", International Congress on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems (AWST - 2011), October 2011
30
Hessamoddin Moshayedi, Iraj Sattari Far, "Study of the Effect of Welding Time and Current on Dimensions of Weld Nuggte in Resistance Spot Welding Process ", 19th Annual International Iranian Mechanical Engineering Confrence, May 2011
31
Hessamoddin Moshayedi, Iraj Sattari Far, "Simulation of Welding Residual Stresses in Resistance Spot Welding of Steel Plates ", 19th Annual International Iranian Mechanical Engineering Confrence, May 2011
32
M. Mirzaali, Iraj Sattari Far, "Finite Element Analysis of Full Penetration and Fillet Welds in Cantilever Beams ", The ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis - ESDA2010, July 2010
33
Iman Akbarzadeh, Iraj Sattari Far, "A Study on the Effect of Convection Modeling on the Distribution and Magnitude of Welding Temperature Fields and Residual Stresses ", IIW International Congress on Welding & Joining, November 2009
34
Mohammad Javad Attarha, Iraj Sattari Far, "Effects of Conductivity and Expansion Coefficient Variations on the Distribution and Magnitude of Residual Stresses in Welded Plates ", IIW International Congress on Welding & Joining, November 2009
35
Iraj Sattari Far, Mohammad Mirzaali, Mehdi Ghnad, "Finite Element Analysis of Full Penetration and Fillet Welds in Cantilever Beams ", IIW International Congress on Welding & Joining, November 2009
36
Nasrin Taheri Nassaj, Iraj Sattari Far, Parvin Abachi, "Effect of Shot Peening and Pre-loading on Mechanical Properties of Al-Mg Welded Joints ", 9th National Conference of Iran Welding and Inspection, October 2008
37
Iraj Sattari Far, Atefeh Ghalami, Rasoul Moharrami, "Study of the Effect of Creep in Stress Releasing Heat Treatment of A Welded Joint By Use of Finite Element and Experimental Methods ", 16th Annual International Iranian Mechanical Engineering Confrence, May 2008
38
Iraj Sattari Far, Davood Akbari, "Study of the Effect of Heat Input on Welding Residual Stresses in Welding of Dissimilar Pipes ", 2nd International (8th National) Conference on Manufacturing Engineering, December 2007
39
[en-name N/A], Iraj Sattari Far, "Effect of welding pass number on residual stresses in butt- welded plates ", , December 2007
40
[en-name N/A], Iraj Sattari Far, "Effect of welding pass number on residual stresses in butt- welded plates ", , December 2007
41
Amir Malakizadi, Hamid Reza Chamani, Seyed Navid Shahangian, Seyed Ali Jazayeri, Iraj Sattari Far, "Thermo-mechanical fatigue life prediction of a heavy duty diesel engine liner ", The ASME Internal Combustion Engine Division 2007 Fall Technical Conference - ICEF2007, October 2007
42
Davood Akbari, Mohammadreza Farahani, Iraj Sattari Far, "Effect of welding heat input and travelling speed on residual stresses in butt welds ", Tehran International Congress on Manufacturing Engineering (TICME2005), December 2005
43
Hamed Bahman Pour, Iraj Sattari Far, "Engineering estimation of the amount of delta ferrite in the weld metal of the stainless steels ", 7th National Conference of Iran Welding and Inspection, December 2005
44
Mohammad Abotalebi, Iraj Sattari Far, "Development of a Welding Technology For Manufacturing of Pressure Vessels of Low Alloy Steel of Type AISI 4130 ", Tehran International Congress on Manufacturing Engineering (TICME2005), December 2005
45
Iraj Sattari Far, Mansour Hajian, "Diffusion bonding between a reactive metal and austenitic stainless steel ", Tehran International Congress on Manufacturing Engineering (TICME2005), December 2005
46
Dr. Farid Reza Biglari, Ali Reza Rezai Nasab, Iraj Sattari Far, [en-name N/A], "Simulation of Dynamic Crack Propogation for Complex Geometries without Remeshing ", , May 2005
47
Iraj Sattari Far, "effect of welding heat input and travelling speed on residual stresses in butt welds ", , March 2005
48
Arash Nikkhah, Iraj Sattari Far, Kamran Sepanloo, "Study on Different Engineering Methods in Applied Fracture Mechanics ", 2nd International Conference of Nuclear Science and Technology in Iran, April 2004
49
Iraj Sattari Far, "Study of fracture behaviour in clad cruciform specimens under biaxial loading ", , August 2003
50
Iraj Sattari Far, L. Dahlberg, "Structural integrity study on an old reactor pressure vessel subjected to cold over-pressurization ", , July 2001
51
Iraj Sattari Far, "Structural integrity assessment:NESC-1 project overviwe ", , March 2000
52
Iraj Sattari Far, L. Dahlberg, "Solutions of crack-tip constraint for surface cracks in plates under different loading conditions ", , January 2000
53
Iraj Sattari Far, "Welding Residual Stresses and their Influence on the Strength of the loaded Constructions ", 4th National Conference on Manufacturing Engineering, February 1999
54
Jalal Manouchehrian, Iraj Sattari Far, "Measuring of Residual Stresses in Repair Welds ", 4th National Conference on Welding and Inspection, March 1998
55
P. Delfin, B. Brickstad., Iraj Sattari Far, "The effects of welded-induced residual stresses on CTOD and j-integral in elastic-plastic fracture analysis ", , January 1998
56
B. Brickstad., M. Bergman, P. Andersson, L. Dahlberg, Iraj Sattari Far, F. Nilsson, "Evaluation of flaws and remaining lifetime estimation of structures and components ", , January 1998
57
Iraj Sattari Far, L. Dahlberg, "A sensitivity study of the pretest analysis of the NESC-1 spinning cylinder experiment ", , January 1998
58
R.A. Ainsworth., Iraj Sattari Far, A.H. Sherry, D.G. Hooton, I. Hadley, "Development of methods for including constraint effects within the SINTAP procedures ", , January 1998
59
Iraj Sattari Far, "Numerical and experimental studies of crack growth in cladded specimens ", , March 1993
60
M. Bergman, B. Brickstad., L. Dahlberg, Iraj Sattari Far, F. Nilsson, "A procedure for safety assessment of components with cracks ", , January 1991
61
M. Bergman, B. Brickstad., L. Dahlberg, Iraj Sattari Far, F. Nilsson, "Practical safety assessment of cracks in pressure vessels ", , January 1991
62
Iraj Sattari Far, "3 dimensinal elastic-plastic FE-analysis of cladded reactor pressure vessels containing surface flaws ", , January 1991
Taught Courses
#
Course title
Description
Headlines
Date
1
Special Topics (Stress-Analysis & Design of Welded Structures)
This course aims to give introduction of weld design to graduate students
Spring 2024
2
Welding Methods Technology
This course aims to give introduction of welding technology and its applications to undergraduate students
Spring 2024
3
Special Topics (Residual Stresses & Deformations Due to Welding)
Wedling residual stresses and distorsions are important in the field of welding engineering. This course aims to give fundamental aspects of these two issues and methods of their measurement and assessment
Spring 2024
4
Special Topics (Engineering Materials Selection for Design and Manufacturing)
. Materials Selection for Design and Manufacturing to increase students capability in design and manufacturing activities
Spring 2024
5
Welding
This course aims to give advanced welding technology and its applications to graduate students
Fall 2023
6
Fracture Mechanics
This course aims to give theoretical grounds of different theories in fracture mechanics and their applications to graduate students.
Fall 2023
7
Special Topics (Residual Stresses & Deformations Due to Welding)
Wedling residual stresses and distorsions are important in the field of welding engineering. This course aims to give fundamental aspects of these two issues and methods of their measurement and assessment
Spring 2023
8
Welding Methods Technology
This course aims to give introduction of welding technology and its applications to undergraduate students
Spring 2023
9
Special Topics (Stress-Analysis & Design of Welded Structures)
This course aims to give introduction of weld design to graduate students
Spring 2023
10
Fracture Mechanics
This course aims to give theoretical grounds of different theories in fracture mechanics and their applications to graduate students.
Fall 2022
11
Welding Methods Technology
This course aims to give introduction of welding technology and its applications to undergraduate students
Fall 2022
12
Welding
This course aims to give advanced welding technology and its applications to graduate students
Fall 2022