Ali Shamsipoor - Amirkabir University of Technology

Supervised PhD Theses

#

Thesis title

By

Date

1

Strengthening Mechanisms and Biocompatibility Properties of Mg-Zn-Mn/Graphene Nanocomposite by Powder Metallurgy

Somayeh Abazari Sivandi & Ali Shamsipoor

July 2022

Supervised MSc Theses

#

Thesis title

By

Date

1

Hybrid friction stir and GTA welding of AA7075 alloy by adding SiC particles

Mostafa Hosseinpurseraji & Ali Shamsipoor

June 2023

2

The Effects Of Friction Stir Welding Parameters On Microstructure And Mechanical Properties Of Dissimilar Butt Joining Of Aluminum 6061 To St37 Carbon Steel

Saman Rasoulpour & Ali Shamsipoor

March 2023

3

Joining of 5754 Aluminum to CuZn35 Brass Sheets by Friction Stir Spot Welding

Ali Tavakoli & Ali Shamsipoor

September 2022

4

The effect of friction stir processing on microstructure and properties of AZ31/SiC surface nanocopmposite fabricated by laser method

Javad Hamidi & Ali Shamsipoor

October 2020

5

Investigation the Effect of addition of zn interlayer on the microstructrue and mechanical propeties of friction stir spot lap welded Mg AZ31 to Al6061

Vahid Monjezi Veysi & Ali Shamsipoor

June 2020

6

the study of the effective operational key parameters on the specific drilling energy with the completion of related experimental set up and performing the calibration tests

Majid Asali & Ali Shamsipoor

June 2020

7

Influence of Zn interlayer and nano-SiC particles addition on microstructure and mechanical properties of friction stir spot welded AZ31 Mg alloy

Millad Amraee & Ali Shamsipoor

June 2019

8

Investigation of Microstructure and Mechanical Properties of Brazed 5754 to 2618 Aluminum Alloy Joint

Samane Baghbani Talemi & Ali Shamsipoor

March 2019

9

Friction stir spot joining of Al to Cu by usning interlayer

Alireza Heidari Vaneghi & Ali Shamsipoor

February 2019

10

Life Prediction of TLP Joints IN-738

Ali Ebrahimzadeh Pilehrood & Ali Shamsipoor

February 2019

11

Friction stir spot welding of dissimilar joints of aluminum - copper with nanoparticles

Medhi Alizadeh & Ali Shamsipoor

February 2019

12

Simulation of material flow in Friction Stir Welding of Stainless Steel 321 & Incoloy 825

Navid Safara & Ali Shamsipoor

January 2019

13

The effect of Process parameters on the microstructure and mechanical properties of transient liquid-phase super Alloy Inconel 625 and comparison with Hastelloy X

Alireza Doroudi & Ali Shamsipoor

January 2018

14

Friction stir welding of Cu-Al dissimilar joint by addition of SiC nano particles

Farhad Bakhtiari & Ali Shamsipoor

February 2017

15

Investigation mechanical properties of a 5xxx Aluminum Alloy sheet joints with metallic interlayer addition by Friction Stir Welding

Amir Anvari & Ali Shamsipoor

February 2017

16

Investigation on microstructure and mechanical properties of transient liquid phase bonded joint of AZ31 magnesium alloy

Sohrab Qahri Saremi & Ali Shamsipoor

October 2016

17

Joining of dissimilar AZ91C Magnesium alloy and stainless steel 316 using pure Cu interlayer by transient liquid phase bonding

Mohsen Ataei & Ali Shamsipoor

March 2016

18

Friction stir welding of dissimilar AL2024 to Copper T-joint

Mostaan Lotfalian Saremi & Ali Shamsipoor

March 2016

19

Investigation on mechanism of drilling and penetration in rock: based on laboratory testing

Hamidreza Karimi Andani & Ali Shamsipoor

November 2015

20

production of surface nano composite on pure copper plate by Friction Strip processing SIC nano particles and graphite micro particles

Sanaz Asadkarami & Ali Shamsipoor

October 2015

Journal Papers

Portal Records

1

Daavood Mirahmadi Khaki, Kamran Dehghani, Ali Shamsipoor, Ali Kalaki, "Hot deformation behavior, microstructure evolution and processing map of Cu–2Be alloy", Journal of Materials Research and Technology, March 2023 Vol. 24, Num. 0, Page 376-394, March 2023,

2

Behruz Bagheri Vanani, Ali Shamsipoor, , Seyed Ehsan Mirsalehi, "Investigation of SiC Nanoparticle Size and Distribution Effects on Microstructure and Mechanical Properties of Al/SiC/Cu Composite during the FSSW Process: Experimental and Simulation", METALS AND MATERIALS INTERNATIONAL, October 2022 Vol. -, Num. 0, Page 0-0, October 2022,

3

Alireza Heidari Vaneghi, Behruz Bagheri Vanani, Ali Shamsipoor, Seyed Ehsan Mirsalehi,, "Investigations into the formation of intermetallic compounds during pinless friction stir spot welding of AA2024-Zn-pure copper dissimilar joints", Welding in the World, September 2022 Vol. 66, Num. 0, Page 2351-2369, September 2022,

4

Behruz Bagheri Vanani, Medhi Alizadeh, Seyed Ehsan Mirsalehi, Ali Shamsipoor,, "Nanoparticles Addition in AA2024 Aluminum/Pure Copper Plate: FSSW Approach, Microstructure Evolution, Texture Study, and Mechanical Properties", JOM, September 2022 Vol. 74, Num. 0, Page 4420-4433, September 2022,

5

Behruz Bagheri Vanani, Medhi Alizadeh, Seyed Ehsan Mirsalehi, Ali Shamsipoor,, "The effect of rotational speed and dwell time on Al/SiC/Cu composite made by friction stir spot welding", Welding in the World, September 2022 Vol. 66, Num. 0, Page 2333-2350, September 2022,

6

Hamid Tazikeh, Seyed Ehsan Mirsalehi, Ali Shamsipoor, "Investigation of microstructure evolution of Inconel 939 joint diffusion brazed using an amorphous liquated Ni-Cr-Fe-Si-B interlayer", KOVOVE MATERIALY-METALLIC MATERIALS, June 2022 Vol. 60, Num. 4, Page 223-231, June 2022,

7

Hamid Tazikeh, Seyed Ehsan Mirsalehi, Ali Shamsipoor, "Relationship of isothermal solidification completion and precipitate formation with mechanical properties of Inconel 939 joints vacuum TLP bonded by an amorphous Ni-Cr-Fe-Si-B filler alloy", Journal of Materials Research and Technology, May 2022 Vol. -, Num. 0, Page 0-0, May 2022,

8

Hamid Tazikeh, Seyed Ehsan Mirsalehi, Ali Shamsipoor, "The effect of bonding temperature on the microstructure and mechanical properties of 939 super alloy by transient liquid phase bonding method", Journal of Welding Science and Technology of Iran, August 2021 Vol. 7, Num. 1, Page 81-88, August 2021,

9

Iman Saadat, Majid Asali, Parviz Maarefvand, , Ali Shamsipoor, "Experimental study of drilling operation with changing the effective parameters on drilling specific energy", Journal of Petroleum Geomechanics, May 2021 Vol. 4, Num. 1, Page 53-66, May 2021,

10

Farhad Bakhtiari, Ali Shamsipoor, Seyed Ehsan Mirsalehi, "Preparation of bimetallic nano-composite by dissimilar friction stir welding of copper to aluminum alloy", TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, April 2021 Vol. 31, Num. 5, Page 1363-1380, April 2021,

11

Somayeh Abazari Sivandi, Ali Shamsipoor, Hamid Reza Bakhsheshi-Rad, Ahmad Fauzi Ismail, Safian Sharif , Mahmood Razzaghi , Seeram Ramakrishna, Filippo Berto, "Carbon Nanotubes (CNTs)-Reinforced Magnesium-Based Matrix Composites: A Comprehensive Review", Materials, October 2020 Vol. 13, Num. 19, Page 1-38, October 2020,

12

Somayeh Abazari Sivandi, Ali Shamsipoor, Hamid Reza Bakhsheshi-Rad , Seeram Ramakrishna, Filippo Berto, "Graphene Family Nanomaterial Reinforced Magnesium-Based Matrix Composites for Biomedical Application: A Comprehensive Review", Metals, July 2020 Vol. 10, Num. 8, Page 1-42, July 2020,

13

Ali Ebrahimzadeh Pilehrood, Hamid Omidvar, Ali Shamsipoor, Zainuddin Sajuri, "Influence of transient liquid phase bonding followed by homogenization on the fatigue lifetimes of inconel 738 at elevated temperature", Journal of Manufacturing Processess, July 2020 Vol. 55, Num. 0, Page 348-358, July 2020,

14

Mohsen Ataei, Ali Shamsipoor, Seyed Ehsan Mirsalehi, "Microstructural characterization and mechanical properties of diffusion-brazed AZ91C magnesium alloy to 316L stainless steel", KOVOVE MATERIALY-METALLIC MATERIALS, October 2019 Vol. 57, Num. 5, Page 299-306, October 2019,

15

Ali Ebrahimzadeh Pilehrood, Hamid Omidvar, Ali Shamsipoor, Meysam Khakian-Ghomi, "Effect of transient liquid phase bonding followed by homogenization on the microstructure and hot tensile behavior of Inconel 738 superalloy", Journal of Manufacturing Processess, October 2019 Vol. 48, Num. 48, Page 110-118, October 2019,

16

Ali Shamsipoor, Sanaz Asadkarami, "Microstructure and mechanical properties of copper surface composite layers reinforced by nano and microscale SiC particles via friction stir processing", ADVANCED COMPOSITE MATERIALS, June 2019 Vol. 0, Num. 0, Page 1-16, June 2019,

17

Alireza Doroudi, Ali Shamsipoor, Hamid Omidvar, Masoud Vatanara, "Effect of transient liquid phase bonding time on the microstructure isothermal solidifcation completion and the mechanical properties during bonding of Inconel 625 superalloy using Cr-Si-B-Ni filler metal", Journal of Manufacturing Processess, January 2019 Vol. 38, Num. 1, Page 235-243, January 2019,

18

Farhad Bakhtiari, Ali Shamsipoor, Seyed Ehsan Mirsalehi, "Dissimilar Joining of Pure Copper to Aluminum Alloy via Friction Stir Welding", Acta Metallurgica Sinica-English Letters, December 2018 Vol. 31, Num. 11, Page 1183-1196, December 2018,

19

Ali Shamsipoor, Farzad Hojjatian Mokhaddam, "Microstructure and Mechanical Properties of the Al/AlN Composite Layer Formed In Situ on Aluminum by FSP in the Presence of Nitrogen Gas", , December 2018 Vol. 14, Num. 38, Page 69-78, December 2018,

20

Ali Shamsipoor, Mohammad Sadegh Pezeshki, Saleh Alaeibehmand, Milad Rezaei, "Improvement in surface specifications of AZ31B magnesium alloy by friction stir processing under nitrogen environment", Materials Research Express, November 2018 Vol. 6, Num. 1, Page 1-10, November 2018,

21

Sohrab Qahri Saremi, Seyed Ehsan Mirsalehi, Ali Shamsipoor, "Transient liquid phase bonding of AZ31 magnesium alloy: Metallurgical structure and mechanical properties", Journal of Manufacturing Processess, August 2018 Vol. 35, Num. 0, Page 140-148, August 2018,

22

Ali Shamsipoor, Amir Anvari, Ahmad Keyvani, "Improvement of microstructure and corrosion properties of friction stir welded AA5754 by adding Zn interlayer", INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, August 2018 Vol. 25, Num. 8, Page 967-973, August 2018,

23

Mahyar Hasanabadi, Ali Shamsipoor, Hassan Najafi Sani, Hamid Omidvar, Sima Sakhaei, "Interfacial microstructure and mechanical properties of tungsten carbide brazed joints using Ag-Cu-Zn+ Ni/Mn filler alloy", TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, December 2017 Vol. 27, Num. 12, Page 2638-2646, December 2017,

24

Mahyar Hasanabadi, Hamid Omidvar, Ali Shamsipoor, "Effect of BAg1 Ni-Electroplating on microstructure and properties of WC-Co-brazed joints", MATERIALS SCIENCE AND TECHNOLOGY, July 2017 Vol. 33, Num. 17, Page 2110-2119, July 2017,

25

Ali Shamsipoor, Seyed-Farshid Kashani-Bozorg, Abbas Zarei-Hanzaki, "Surface Modification of Titanium by Producing Ti/TiN Surface Composite Layers via FSP", Acta Metallurgica Sinica-English Letters, February 2017 Vol. 30, Num. 6, Page 550-557, February 2017,

26

Mostaan Lotfalian Saremi, Seyed Ehsan Mirsalehi, Ali Shamsipoor, "Investigation on Metallurgical Structure and Mechanical Properties of Dissimilar Al 2024/Cu FSW T-joints", TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, November 2016 Vol. 0, Num. 0, Page 0-0, November 2016,

27

Samira Kariminia, Ali Shamsipoor, Mogtaba Shamsipur, "Analytical characteristics and application of novel chitosan coated magnetic nanoparticles as an efficient drug delivery system for ciprofloxacin. Enhanced drug release kinetics by low-frequency ultrasounds", JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS, October 2016 Vol. 129, Num. 0, Page 450-457, October 2016,

28

Mojtaba Shamsipur, Zhba Karimi, Mahmoud Amouzadeh Tabrizi, Ali Shamsipoor, "Electrocatalytic Determination of Traces of Hydrazine by a Glassy Carbon Electrode Modified with Palladium-Gold Nanoparticles", ELECTROANALYSIS, September 2014 Vol. 26, Num. 26, Page 1994-2001, September 2014,

Conference Papers

Portal Records

1

Ali Ebrahimzadeh Pilehrood, Ali Shamsipoor, Hamid Omidvar, "Effect of homogenization of transient liquid phase bonding of Inconel 738 superalloy on properties and high temperature ّFatigue Life of joints ", 8th international conference of metallurgy and materials engineering, October 2019

2

Ali Ebrahimzadeh Pilehrood, Hamid Omidvar, Ali Shamsipoor, "Effect of homogenization of transient liquid phase bonding of Inconel 738 superalloy on microstructure and high temperature tensile properties of joints ", 8th international conference of metallurgy and materials engineering, October 2019

3

Seyed Mohamad Reza Hosseini, Ali Shamsipoor, "Joining of 5754 Aluminum Sheets Using Friction Stir Welding by Adding Ceramic Reinforcement Particle ", 8th international conference of metallurgy and materials engineering, October 2019

4

Ali Ebrahimzadeh Pilehrood, Kazem Abbasi Valikandi, Ali Shamsipoor, "Optimization of laser Cladding Process on 17-4-PH Stainless Steel ", 8th international conference of metallurgy and materials engineering, October 2019

5

Ali Shamsipoor, Horieh Jalali Khazrai Moghadam, "Effect of reinforcing particles percentage on the microstructure and wear properties of Ti/SiC surface nanocomposite produced by the friction stir processing ", 7th international conference of metallurgy and materials engineering, October 2018

6

Ali Ebrahimzadeh Pilehrood, Hamid Omidvar, Ali Shamsipoor, "The effect of isothermal solidi?cation on the high temperature tensile properties of the inconel 738 superalloy bonded by TLP ", 7th international conference of metallurgy and materials engineering, October 2018

7

Hamid Omidvar, Mehran Javanbakht, Alireza Doroudi, Ali Shamsipoor, "The effect of transient liquid phase bonding temperature on microstructural characteristics of Hastelloy X superalloy joints ", (426th International Confertence on Metallurgy and Materials(ICMTM, August 2018

8

Behrouz Chahushizadeh, Ali Shamsipoor, "Corrosion behavior of Ti/TiN and Ti/SiC surface composites produced by FSP on CP-Ti in Ringer environment ", 17th National Corrosion Congress, December 2016

9

Amir Anvari, Ali Shamsipoor, "Investigation of Mechanical and metallurgical properties of 5754 aluminum similar joint by adding a layer using friction stir welding ", 5th International Conference on materials Engineering and Metallurgy, November 2016

10

Farhad Bakhtiari, Ali Shamsipoor, Seyed Ehsan Mirsalehi, "Influence of addition SiC nano powder on mechanical properties of Cu-Al dissimilar joints with Friction Stir welding ", 5th INTERNATIONAL CONFERENCE ON ENGINEERING MATERIALS AND METALLURGY, November 2016

11

Behnam Karimzadeh, Ali Shamsipoor, "Effects of TIG welding on mechanical properties of stainless steel ", 5th International Conference on materials Engineering and Metallurgy, November 2016

12

Mostaan Lotfalian Saremi, Seyed Ehsan Mirsalehi, Ali Shamsipoor, "Weldability and mechanical properties of t-joint fsw of Al alloy to Cu ", 4th International Engineering Materials & Metallurgy Conference, November 2015

13

Ahmad Haddadi, Ali Shamsipoor, Farzad Hojjatian Mokhaddam, Seyed Farshid Kashani-Bozorg, "producing Al/AlN surface composite layer on Al by FSP in nitrogen invironment ", The 4th international engineering materials & metallurgy conference, November 2015

14

Mahyar Hasanabadi, Hamid Omidvar, Ali Shamsipoor, Hasan Najafi Sani, "Effect of brazing time and size gap on mechanical properties and microstructure of tungsten carbide Joints Brazed with BAg22 ", The second regional conference on welding engineering and inspection, October 2014

Taught Courses

#

Course title

Description

Headlines

Date

1

Surface Engineering and Coating

Learning The Science of Coating Materials and Surface Engineering and Acquaintance with Surface Operation Processes to Improve Surface Properties

Fall 2022

2

Materials Physics

Introduction to electrical, thermal, optic, and magnetic properties of materials; Relationship between properties and electronic structure; Introduction to semiconductors, dielectric materials and magnetic materials

Spring 2022