Ali Shamsipoor - Amirkabir University of Technology

Special services: Faculty Members Students Graduates

Content

Pepole

Amirkabir University of Technology

Resume Service

Ali Shamsipoor

Associate Professor
Department of Materials and Metallurgical Engineering
Manufacturing Processes

Download PDF فارسی

Email:

shamsipur

aut.ac.ir

Phone:

h-index (Scopus):

24.00

Citations (Scopus):

1767

Supervised PhD Theses

Thesis title

Date

Self-healing of copper-beryllium alloys by precipitation

DAAVOOD MIRAHMADI KHAKI & KAMRAN DEHGHANI

2024 May

Strengthening Mechanisms and Biocompatibility Properties of Mg-Zn-Mn/Graphene Nanocomposite by Powder Metallurgy

SOMAYEH ABAZARI SIVANDI

2022 Jul

Supervised MSc Theses

Thesis title

Date

Improvement in parameters of selective laser melting using image processing and machine learning

MOHAMMAD AZIM MEMARI

2024 May

In situ Additive manufacturing of CoCrFeMnNihigh entropy alloy by direct laser deposition method

MUSTAPHA MASHHADI

2024 Mar

Hybrid friction stir and GTA welding of AA7075 alloy by adding SiC particles

MOSTAFA HOSSEINPURSERAJI

2023 Jun

The Effects Of Friction Stir Welding Parameters On Microstructure And Mechanical Properties Of Dissimilar Butt Joining Of Aluminum 6061 To St37 Carbon Steel

SAMAN RASOULPOUR

2023 Mar

Joining of 5754 Aluminum to CuZn35 Brass Sheets by Friction Stir Spot Welding

ALI TAVAKOLI

2022 Sep

The effect of friction stir processing on microstructure and properties of AZ31/SiC surface nanocopmposite fabricated by laser method

JAVAD HAMIDI

2020 Oct

Investigation the Effect of addition of zn interlayer on the microstructrue and mechanical propeties of friction stir spot lap welded Mg AZ31 to Al6061

VAHID MONJEZI VEYSI

2020 Jun

the study of the effective operational key parameters on the specific drilling energy with the completion of related experimental set up and performing the calibration tests

MAJID ASALI

2020 Jun

Influence of Zn interlayer and nano-SiC particles addition on microstructure and mechanical properties of friction stir spot welded AZ31 Mg alloy

MILAD AMRAEI

2019 Jun

Investigation of Microstructure and Mechanical Properties of Brazed 5754 to 2618 Aluminum Alloy Joint

SAMANE BAGHBANI TALEMI

2019 Mar

Friction stir spot welding of dissimilar joints of aluminum - copper with nanoparticles

MEDHI ALIZADEH

2019 Feb

Life Prediction of TLP Joints IN-738

ALI EBRAHIMZADEH PILEHROOD & HAMID OMIDVAR

2019 Feb

Friction stir spot joining of Al to Cu by usning interlayer

ALIREZA HEIDARI VANEGHI & SEYED EHSAN MIRSALEHI

2019 Feb

Simulation of material flow in Friction Stir Welding of Stainless Steel 321 & Incoloy 825

NAVID SAFARA & KAMRAN DEHGHANI

2019 Jan

The effect of Process parameters on the microstructure and mechanical properties of transient liquid-phase super Alloy Inconel 625 and comparison with Hastelloy X

ALIREZA DOROUDI & HAMID OMIDVAR

2018 Jan

Investigation mechanical properties of a 5xxx Aluminum Alloy sheet joints with metallic interlayer addition by Friction Stir Welding

AMIR ANVARI

2017 Feb

Friction stir welding of Cu-Al dissimilar joint by addition of SiC nano particles

FARHAD BAKHTIARI

2017 Feb

Investigation on microstructure and mechanical properties of transient liquid phase bonded joint of AZ31 magnesium alloy

SOHRAB QAHRI SAREMI & SEYED EHSAN MIRSALEHI

2016 Oct

Joining of dissimilar AZ91C Magnesium alloy and stainless steel 316 using pure Cu interlayer by transient liquid phase bonding

MOHSEN ATAEI & SEYED EHSAN MIRSALEHI

2016 Mar

Friction stir welding of dissimilar AL2024 to Copper T-joint

MOSTAAN LOTFALIAN SAREMI & SEYED EHSAN MIRSALEHI

2016 Mar

Investigation on mechanism of drilling and penetration in rock: based on laboratory testing

HAMIDREZA KARIMI ANDANI & PARVIZ MAAREFVAND

2015 Nov

production of surface nano composite on pure copper plate by Friction Strip processing SIC nano particles and graphite micro particles

SANAZ ASADKARAMI

2015 Oct

Friction stir processing of precipitation hardening Al-7075 alloy

EMAD BADRI

2025 Sep

Industrial application of vanadium obtained from electric arc furnace slag

MASOUD KHANJARI

2025 Oct

Journal Papers

MEMARI MOHAMMAD AZIM ، FARZADI ALI ، Davarzani Hossein ، Shamsipoor Ali, "Integrated image processing and machine learning framework for defect detection and prediction in selective laser melting of Hastelloy X", Welding In The World, 2026 May vol. 0, no. 0, , 2026.

MEMARI MOHAMMAD AZIM ، FARZADI ALI ، Karami Fini AmirHossein ، Aliabadi Mohsen ، Shamsipoor Ali, "Correlation between Process Parameters and Defects in Additively Manufactured Components Using Image Processing and Machine Learning", International Journal of Precision Engineering and Manufacturing, 2025 Dec vol. 0, no. 0, , 2025.

SANAEI SHIRIN BOLAGH ZAHRA ، Shamsipoor Ali ، Bahram Ramezanzadeh, "Rationally designed phosphate-doped zinc-cobalt based MOFs wrapped ZnAl-LDH decorated LGO; towards designing epoxy coating with enhanced mechanical & thermal properties", Journal of Industrial and Engineering Chemistry, 2024 Mar vol. 1, no. 1, pp.1-20, 2024.

MIRAHMADI KHAKI DAAVOOD ، DEHGHANI KAMRAN ، Shamsipoor Ali ، KALAKI ALI, "Mechanism of self-healing behavior in rolled Cu-2Be flat product", Engineering Failure Analysis, 2023 Dec vol. 156, no. 156, pp.1-13, 2023.

ABAZARI SIVANDI SOMAYEH ، Shamsipoor Ali ، Hamid Reza Bakhsheshi-Rad ، Jaroslaw W. Drelich ، Jeremy Goldman ، Safian Sharif ، Ahmad Fauzi Ismail ، Mohammad Mehdi Razzaghi, "Magnesium-based nanocomposites: A review from mechanical, creep and fatigue properties", Journal of Magnesium and Alloys, 2023 Oct vol. 8, no. 11, pp.2655-2687, 2023.

MIRAHMADI KHAKI DAAVOOD ، DEHGHANI KAMRAN ، Shamsipoor Ali ، ali kalaki, "Hot deformation behavior, microstructure evolution and processing map of Cu-2Be alloy", Journal of Materials Research and Technology-Jmr and T, 2023 Mar vol. 24, no. 0, pp.376-394, 2023.

ABAZARI SIVANDI SOMAYEH ، Shamsipoor Ali ، Hamid Reza Bakhsheshi-Rad, "Synergistic effect of hybrid reduced graphene oxide (rGO) and carbon nanotubes (CNTs) reinforcement on microstructure, mechanical and biological properties of magnesium-based composite", Materials Chemistry and Physics, 2023 Mar vol. 301, no. 127543, pp.1-14, 2023.

SANAEI SHIRIN BOLAGH ZAHRA ، Shamsipoor Ali ، Bahram Ramezanzadeh, "Manipulating a smart multi-functional nano-carrier based on l-cysteine-GO-ZIF67@ZIF8 core@shell MOFs-LDH for designing an excellent self-healing coating", Applied Materials Today, 2023 Feb vol. 30, no. 1, pp.1-15, 2023.

SANAEI SHIRIN BOLAGH ZAHRA ، Shamsipoor Ali ، Bahram Ramezanzadeh, "Trisodium phosphate-loaded hierarchically ordered meso-nanoporous ZIF-67/ZIF-8 metal-organic frameworks assembled rGO-Zn-Al-LDH: A multi-level pH-triggered nano-vehicle for epoxy coating long-lasting self-repairing/barrier properties improvement", Chemical Engineering Journal, 2023 Jan vol. 451, no. 4, pp.1-25, 2023.

REZAEI MORTEZA ، DAVARI ALI ، MIRHOSSEINI SEYYED SABER ، Shamsipoor Ali, "Fabrication and optimization of AA5754/SiC nanocomposites via friction-stir processing (FSP)", Metallurgical Research and Technology, 2023 Jan vol. 120, no. 1, pp.1-13, 2023.

Amin Abdollahzadeh ، BAGHERI VANANI BEHRUZ ، HEIDARI VANEGHI ALIREZA ، Shamsipoor Ali ، MIRSALEHI SEYED EHSAN, "Advances in simulation and experimental study on intermetallic formation and thermomechanical evolution of Al-Cu composite with Zn interlayer: Effect of spot pass and shoulder diameter during the pinless friction stir spot welding process", Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 2022 Dec vol. 237, no. 6, pp.1475-1494, 2022.

Amin Abdollahzadeh ، BAGHERI VANANI BEHRUZ ، Shamsipoor Ali, "Development of Al/Cu/SiC bimetallic nano-composite by friction stir spot welding", Materials and Manufacturing Processes, 2022 Dec vol. 38, no. 11, pp.1416-1425, 2022.

BAGHERI VANANI BEHRUZ ، Amin Abdollahzadeh ، Shamsipoor Ali, "A different attempt to analysis friction stir spot welding of AA5083-copper alloys", Materials Science and Technology, 2022 Dec vol. 39, no. 9, pp.1083-1089, 2022.

BAGHERI VANANI BEHRUZ ، Shamsipoor Ali ، ، MIRSALEHI SEYED EHSAN, "Investigation of SiC Nanoparticle Size and Distribution Effects on Microstructure and Mechanical Properties of Al/SiC/Cu Composite during the FSSW Process: Experimental and Simulation", Metals and Materials International, 2022 Oct vol. -, no. 0, , 2022.

ABAZARI SIVANDI SOMAYEH ، Shamsipoor Ali ، Hamid Reza Bakhsheshi-Rad ، Mohsen Keshavarz ، Mousa Kehtari ، Seeram Ramakrishna ، Filippo Berto, "MgO-incorporated carbon nanotubes-reinforced Mg-based composites to improve mechanical, corrosion, and biological properties targeting biomedical applications", Journal of Materials Research and Technology-Jmr and T, 2022 Sep vol. 20, no. 0, pp.976-990, 2022.

BAGHERI VANANI BEHRUZ ، ALIZADEH MEDHI ، MIRSALEHI SEYED EHSAN ، Shamsipoor Ali ،, "The effect of rotational speed and dwell time on Al/SiC/Cu composite made by friction stir spot welding", Welding In The World, 2022 Sep vol. 66, no. 0, pp.2333-2350, 2022.

BAGHERI VANANI BEHRUZ ، ALIZADEH MEDHI ، MIRSALEHI SEYED EHSAN ، Shamsipoor Ali ،, "Nanoparticles Addition in AA2024 Aluminum/Pure Copper Plate: FSSW Approach, Microstructure Evolution, Texture Study, and Mechanical Properties", Jom, 2022 Sep vol. 74, no. 0, pp.4420-4433, 2022.

HEIDARI VANEGHI ALIREZA ، BAGHERI VANANI BEHRUZ ، Shamsipoor Ali ، MIRSALEHI SEYED EHSAN ،, "Investigations into the formation of intermetallic compounds during pinless friction stir spot welding of AA2024-Zn-pure copper dissimilar joints", Welding In The World, 2022 Sep vol. 66, no. 0, pp.2351-2369, 2022.

TAZIKEH HAMID ، MIRSALEHI SEYED EHSAN ، Shamsipoor Ali, "Investigation of microstructure evolution of Inconel 939 joint diffusion brazed using an amorphous liquated Ni-Cr-Fe-Si-B interlayer", Kovove Materialy-Metallic Materials, 2022 Jun vol. 60, no. 4, pp.223-231, 2022.

TAZIKEH HAMID ، MIRSALEHI SEYED EHSAN ، Shamsipoor Ali, "Relationship of isothermal solidification completion and precipitate formation with mechanical properties of Inconel 939 joints vacuum TLP bonded by an amorphous Ni-Cr-Fe-Si-B filler alloy", Journal of Materials Research and Technology-Jmr and T, 2022 May vol. -, no. 0, , 2022.

ABAZARI SIVANDI SOMAYEH ، Shamsipoor Ali ، Hamid Reza Bakhsheshi-Rad ، Filippo Berto, "Functionalized carbon nanotube-encapsulated magnesium-based nanocomposites with outstanding mechanical and biological properties as load-bearing bone implants", Materials and Design, 2021 Dec vol. 213, no. 0, pp.110354-0, 2021.

ABAZARI SIVANDI SOMAYEH ، Shamsipoor Ali ، Hamid Reza Bakhsheshi-Rad, "Reduced graphene oxide (RGO) reinforced Mg biocomposites for use as orthopedic applications: Mechanical properties, cytocompatibility and antibacterial activity", Journal of Magnesium and Alloys, 2021 Dec vol. 10, no. 12, pp.3612-3627, 2021.

TAZIKEH HAMID ، MIRSALEHI SEYED EHSAN ، Shamsipoor Ali, "The effect of bonding temperature on the microstructure and mechanical properties of 939 super alloy by transient liquid phase bonding method", Journal of Welding Science and Technology of Iran, 2021 Aug vol. 7, no. 1, pp.81-88, 2021.

SAADAT IMAN ، ASALI MAJID ، MAAREFVAND PARVIZ ، ، Shamsipoor Ali, "Experimental study of drilling operation with changing the effective parameters on drilling specific energy", Journal of Petroleum Geomechanics, 2021 May vol. 4, no. 1, pp.53-66, 2021.

BAKHTIARI FARHAD ، Shamsipoor Ali ، MIRSALEHI SEYED EHSAN, "Preparation of bimetallic nano-composite by dissimilar friction stir welding of copper to aluminum alloy", Transactions of Nonferrous Metals Society of China, 2021 Apr vol. 31, no. 5, pp.1363-1380, 2021.

ABAZARI SIVANDI SOMAYEH ، Shamsipoor Ali ، Hamid Reza Bakhsheshi-Rad ، Ahmad Fauzi Ismail ، Safian Sharif ، Mahmood Razzaghi ، Seeram Ramakrishna ، Filippo Berto, "Carbon Nanotubes (CNTs)-Reinforced Magnesium-Based Matrix Composites: A Comprehensive Review", Materials, 2020 Oct vol. 13, no. 19, pp.1-38, 2020.

ABAZARI SIVANDI SOMAYEH ، Shamsipoor Ali ، Hamid Reza Bakhsheshi-Rad ، Seeram Ramakrishna ، Filippo Berto, "Graphene Family Nanomaterial Reinforced Magnesium-Based Matrix Composites for Biomedical Application: A Comprehensive Review", Metals, 2020 Jul vol. 10, no. 8, pp.1-42, 2020.

EBRAHIMZADEH PILEHROOD ALI ، OMIDVAR HAMID ، Shamsipoor Ali ، Zainuddin Sajuri, "Influence of transient liquid phase bonding followed by homogenization on the fatigue lifetimes of inconel 738 at elevated temperature", Journal of Manufacturing Processes, 2020 Jul vol. 55, no. 0, pp.348-358, 2020.

EBRAHIMZADEH PILEHROOD ALI ، OMIDVAR HAMID ، Shamsipoor Ali ، Meysam Khakian-Ghomi, "Effect of transient liquid phase bonding followed by homogenization on the microstructure and hot tensile behavior of Inconel 738 superalloy", Journal of Manufacturing Processes, 2019 Oct vol. 48, no. 48, pp.110-118, 2019.

ATAEI MOHSEN ، Shamsipoor Ali ، MIRSALEHI SEYED EHSAN, "Microstructural characterization and mechanical properties of diffusion-brazed AZ91C magnesium alloy to 316L stainless steel", Kovove Materialy-Metallic Materials, 2019 Oct vol. 57, no. 5, pp.299-306, 2019.

Shamsipoor Ali ، ASADKARAMI SANAZ, "Microstructure and mechanical properties of copper surface composite layers reinforced by nano and microscale SiC particles via friction stir processing", Advanced Composite Materials, 2019 Jun vol. 0, no. 0, pp.1-16, 2019.

DOROUDI ALIREZA ، Shamsipoor Ali ، OMIDVAR HAMID ، Masoud Vatanara, "Effect of transient liquid phase bonding time on the microstructure isothermal solidifcation completion and the mechanical properties during bonding of Inconel 625 superalloy using Cr-Si-B-Ni filler metal", Journal of Manufacturing Processes, 2019 Jan vol. 38, no. 1, pp.235-243, 2019.

Shamsipoor Ali ، HOJJATIAN MOKHADDAM FARZAD, "Microstructure and Mechanical Properties of the Al/AlN Composite Layer Formed In Situ on Aluminum by FSP in the Presence of Nitrogen Gas", , 2018 Dec vol. 14, no. 38, pp.69-78, 2018.

BAKHTIARI FARHAD ، Shamsipoor Ali ، MIRSALEHI SEYED EHSAN, "Dissimilar Joining of Pure Copper to Aluminum Alloy via Friction Stir Welding", Acta Metallurgica Sinica-English Letters, 2018 Dec vol. 31, no. 11, pp.1183-1196, 2018.

Shamsipoor Ali ، PEZESHKI MOHAMMAD SADEGH ، ALAEIBEHMAND SALEH ، REZAEI MILAD, "Improvement in surface specifications of AZ31B magnesium alloy by friction stir processing under nitrogen environment", Materials Research Express, 2018 Nov vol. 6, no. 1, pp.1-10, 2018.

QAHRI SAREMI SOHRAB ، MIRSALEHI SEYED EHSAN ، Shamsipoor Ali, "Transient liquid phase bonding of AZ31 magnesium alloy: Metallurgical structure and mechanical properties", Journal of Manufacturing Processes, 2018 Aug vol. 35, no. 0, pp.140-148, 2018.

Shamsipoor Ali ، ANVARI AMIR ، Ahmad Keyvani, "Improvement of microstructure and corrosion properties of friction stir welded AA5754 by adding Zn interlayer", International Journal of Minerals Metallurgy and Materials, 2018 Aug vol. 25, no. 8, pp.967-973, 2018.

HASANABADI MAHYAR ، Shamsipoor Ali ، NAJAFI SANI HASSAN ، OMIDVAR HAMID ، SAKHAEI SIMA, "Interfacial microstructure and mechanical properties of tungsten carbide brazed joints using Ag-Cu-Zn+ Ni/Mn filler alloy", Transactions of Nonferrous Metals Society of China, 2017 Dec vol. 27, no. 12, pp.2638-2646, 2017.

HASANABADI MAHYAR ، OMIDVAR HAMID ، Shamsipoor Ali, "Effect of BAg1 Ni-Electroplating on microstructure and properties of WC-Co-brazed joints", Materials Science and Technology, 2017 Jul vol. 33, no. 17, pp.2110-2119, 2017.

Shamsipoor Ali ، Seyed-Farshid Kashani-Bozorg ، Abbas Zarei-Hanzaki, "Surface Modification of Titanium by Producing Ti/TiN Surface Composite Layers via FSP", Acta Metallurgica Sinica-English Letters, 2017 Feb vol. 30, no. 6, pp.550-557, 2017.

LOTFALIAN SAREMI MOSTAAN ، MIRSALEHI SEYED EHSAN ، Shamsipoor Ali, "Investigation on Metallurgical Structure and Mechanical Properties of Dissimilar Al 2024/Cu FSW T-joints", Transactions of The Indian Institute of Metals, 2016 Nov vol. 0, no. 0, , 2016.

Samira Kariminia ، Shamsipoor Ali ، Mogtaba Shamsipur, "Analytical characteristics and application of novel chitosan coated magnetic nanoparticles as an efficient drug delivery system for ciprofloxacin. Enhanced drug release kinetics by low-frequency ultrasounds", Journal of Pharmaceutical and Biomedical Analysis, 2016 Oct vol. 129, no. 0, pp.450-457, 2016.

Mojtaba Shamsipur ، Zhba Karimi ، Mahmoud Amouzadeh Tabrizi ، Shamsipoor Ali, "Electrocatalytic Determination of Traces of Hydrazine by a Glassy Carbon Electrode Modified with Palladium-Gold Nanoparticles", Electroanalysis, 2014 Sep vol. 26, no. 26, pp.1994-2001, 2014.

Conference Papers

Mohamad Sajad Rabieezadeh ، Amin Abdollahzadeh ، Shamsipoor Ali ، AMRAEI MILAD, "Effect of the zinc interlayer of and SiC reinforcing particles on the hardness and microstructure of AZ31 magnesium joints produced by friction stir spot welding,", 3rd International Conference and 7th National Conference on Materials, Metallurgy & Mining, Feb 2024.

AMRAEI MILAD ، Amin Abdollahzadeh ، Shamsipoor Ali ، Mohamad Sajad Rabieezadeh, "Investigating the shear strength and microstructure of AZ31 alloy welded by FSSW with the addition of reinforcing particles and interlayer,", 3rd International Conference and 7th National Conference on Materials, Metallurgy & Mining, Feb 2024.

HOSSEINPURSERAJI MOSTAFA ، Shamsipoor Ali, "Joining 7075 aluminum sheets by hybrid TIG and FSP weiding methods using SiC reinforcing particles,", The 11th international conference of metallurgy and materials engineering, Dec 2022.

REZAEI MORTEZA ، DAVARI ALI ، Shamsipoor Ali, "Properties of the surface composites of aluminum alloy 5754 by addition of SiC ceramic nanoparticles produced by friction-stir prossecing,", The 10th international conference of metallurgy and materials engineering, Nov 2021.

REZAEI MORTEZA ، DAVARI ALI ، Shamsipoor Ali, "Investigation of the effect of tool rotational speed on surface compositing of 5754 aluminum alloy with the addition of SiC ceramic nanoparticles,", Sixth International Conference on Mechanical Engineering, Materials and Metallurgy, Oct 2021.

SANAEI SHIRIN BOLAGH ZAHRA ، Shamsipoor Ali ، Bahram Ramezanzadeh, "Synthesis and application of the MBT loaded MOF-LDH@rGO nano-composite for mild steel corrosion mitigation in simulated seawater solution,", The 8th International Color and Coating Congress (ICCC2021), Oct 2021.

EBRAHIMZADEH PILEHROOD ALI ، Shamsipoor Ali ، OMIDVAR HAMID, "Effect of homogenization of transient liquid phase bonding of Inconel 738 superalloy on properties and high temperature Fatigue Life of joints,", 8th international conference of metallurgy and materials engineering, Oct 2019.

HOSSEINI SEYED MOHAMAD REZA ، Shamsipoor Ali, "Joining of 5754 Aluminum Sheets Using Friction Stir Welding by Adding Ceramic Reinforcement Particle,", 8th international conference of metallurgy and materials engineering, Oct 2019.

EBRAHIMZADEH PILEHROOD ALI ، OMIDVAR HAMID ، Shamsipoor Ali, "Effect of homogenization of transient liquid phase bonding of Inconel 738 superalloy on microstructure and high temperature tensile properties of joints,", 8th international conference of metallurgy and materials engineering, Oct 2019.

EBRAHIMZADEH PILEHROOD ALI ، Kazem Abbasi Valikandi ، Shamsipoor Ali, "Optimization of laser Cladding Process on 17-4-PH Stainless Steel,", 8th international conference of metallurgy and materials engineering, Oct 2019.

EBRAHIMZADEH PILEHROOD ALI ، OMIDVAR HAMID ، Shamsipoor Ali, "The effect of isothermal solidi?cation on the high temperature tensile properties of the inconel 738 superalloy bonded by TLP,", 7th international conference of metallurgy and materials engineering, Oct 2018.

Shamsipoor Ali ، JALALI KHAZRAI MOGHADAM HORIEH, "Effect of reinforcing particles percentage on the microstructure and wear properties of Ti/SiC surface nanocomposite produced by the friction stir processing,", 7th international conference of metallurgy and materials engineering, Oct 2018.

OMIDVAR HAMID ، Javanbakht Mehran ، DOROUDI ALIREZA ، Shamsipoor Ali, "The effect of transient liquid phase bonding temperature on microstructural characteristics of Hastelloy X superalloy joints,", (426th International Confertence on Metallurgy and Materials(ICMTM, Aug 2018.

Behrouz Chahushizadeh ، Shamsipoor Ali, "Corrosion behavior of Ti/TiN and Ti/SiC surface composites produced by FSP on CP-Ti in Ringer environment,", 17th National Corrosion Congress, Dec 2016.

Behrouz Chahushizadeh ، Shamsipoor Ali, "Corrosion behavior of Ti/TiN and Ti/SiC surface composites produced by FSP on CP-Ti in dilute acid environment,", 17th National Corrosion Congress, Dec 2016.

Behnam Karimzadeh ، Shamsipoor Ali, "Effects of TIG welding on mechanical properties of stainless steel,", 5th International Conference on materials Engineering and Metallurgy, Nov 2016.

ANVARI AMIR ، Shamsipoor Ali, "Investigation of Mechanical and metallurgical properties of 5754 aluminum similar joint by adding a layer using friction stir welding,", 5th International Conference on materials Engineering and Metallurgy, Nov 2016.

BAKHTIARI FARHAD ، Shamsipoor Ali ، MIRSALEHI SEYED EHSAN, "Influence of addition SiC nano powder on mechanical properties of Cu-Al dissimilar joints with Friction Stir welding,", 5th INTERNATIONAL CONFERENCE ON ENGINEERING MATERIALS AND METALLURGY, Nov 2016.

LOTFALIAN SAREMI MOSTAAN ، MIRSALEHI SEYED EHSAN ، Shamsipoor Ali, "Weldability and mechanical properties of t-joint fsw of Al alloy to Cu,", 4th International Engineering Materials & Metallurgy Conference, Nov 2015.

Ahmad Haddadi ، Shamsipoor Ali ، HOJJATIAN MOKHADDAM FARZAD ، Seyed Farshid Kashani-Bozorg, "producing Al/AlN surface composite layer on Al by FSP in nitrogen invironment,", The 4th international engineering materials & metallurgy conference, Nov 2015.

HASANABADI MAHYAR ، OMIDVAR HAMID ، Shamsipoor Ali ، hasan najafi sani, "Effect of brazing time and size gap on mechanical properties and microstructure of tungsten carbide Joints Brazed with BAg22,", The second regional conference on welding engineering and inspection, Oct 2014.

Taught Courses

Course title

Description

Headlines

Date

Surface Engineering and Coating

4051

Heat Treatment

4042

Errors in Materials Measurement & Research

آشنایی و یادگیری انواع خطا در اندازه گیری در مهندسی مواد

4042

Mechanical Aspects of Corrosion

آشنایی با مبانی و انواع روش های خوردگی همراه با تنش

4042

Surface Engineering and Coating

4041

Errors in Materials Measurement & Research

4041

Mechanical Aspects of Corrosion

4032

Surface Engineering and Coating

4032