1
B. Bagheri Vanani, M. Abbasi, A. Abdollahzadeh, M. Mohammadkhah, S. Klinge, "High-pressure torsion (HPT) on nanocomposite produced by multi-pass friction stir process (MP-FSP): Microstructure evolution and wear behaviors", Journal of Materials Research and Technology-Jmr and T, 2025 Nov
vol. 39,
no. 2,
pp.7095-7109,
2025.
2
B. Bagheri Vanani, A. Abdollahzadeh, M. Abbasi, M. Mohammadkhah, S. Klinge, "Zn interlayer and tool offset effects on IMC formation and strength of AA5083/AZ91Mg joints via friction stir vibration welding", International Journal of Advanced Manufacturing Technology, 2025 Oct
vol. 2,
no. 10,
pp.1-12,
2025.
3
M. Abbasi, B. Bagheri Vanani, Amin Abdollahzadeh, Mahdi Sadeqi Bajestani, Melika Mohammadkhah, Sandra Klinge, "CNT-induced microstructural evolution in Al matrix composite made by additive manufacturing and studying the effect of CNT presence on mechanical and tribological properties", Results In Engineering, 2025 Aug
vol. 27,
no. 22,
pp.1-16,
2025.
4
B. Bagheri Vanani, Mohammad Reza Mehraban Dehaqan, M. Abbasi, Mahdi Sadeqi Bajestan, Melika Mohammadkhah, Sandra Klinge, "Effects of PWHT on the microstructure, corrosion, tribology, and mechanical properties of mild steel welds under different joining positions: Experimental and Numerical Study", Journal of Materials Research and Technology-Jmr and T, 2025 Jul
vol. 38,
no. 1,
pp.752-767,
2025.
5
Behrouz Bagheri, M. Abbasi, Mohammad Givi, "Compressive behavior of octet lattice made by carbon fiber reinforced polymer composite hollow struts: molecular dynamic simulation", Multiscale and Multidisciplinary Modeling Experiments and Design, 2024 Oct
vol. ,
no. 0,
pp.1-8,
2024.
6
Ali Tahaei, M. Abbasi, B. Bagheri Vanani, Federica Zanotto, Argelia Fabiola, Miranda Perez, "The Role of Nitrogen Gas and PWHT on Pitting Corrosion Behavior of Duplex Stainless-Steel Joint Made by GTAW", Metallography Microstructure and Analysis, 2024 Aug
vol. 13,
no. 0,
pp.624-639,
2024.
7
B. Bagheri Vanani, M. Abbasi, Amin Abdollahzadeh, "A new investigation on graphene-reinforced 304L nanocomposite made by additive manufacturing process: microstructure and tribology study", Journal of Materials Research and Technology-Jmr and T, 2024 Jul
vol. -,
no. 32,
pp.674-686,
2024.
8
Ahmed Esmael Mohan, Zainuddin Sajuri, Amir Hossein Baghdadi, Nashrah Hani Jamadon, M. Abbasi, "Influences of graphene nanoplatelet addition and pin lengths on the microstructure and mechanical properties of 7075 aluminum alloy under friction stir spot welding", Journal of Materials Research and Technology-Jmr and T, 2024 Jul
vol. 31,
no. 0,
pp.3436-3452,
2024.
9
M. Abbasi, Ali Tahaei, B. Bagheri Vanani, Ana Arizmendi-morquecho, "Adding WC Nano-particles to Nickel-Based Coating Deposited by PTA Process: Microstructure and Nanoindentation Hardness Characteristics", Jom, 2024 Jun
vol. -,
no. 76,
pp.4235-4248,
2024.
10
Ali Tahaei, B. Bagheri Vanani, M. Abbasi, Matia Merlin, Gian Luca Garagnani, "The relationship between austenite stabiliser element and post-weld heat treatment on the corrosion behaviour of the welded duplex stainless steel made by gas tungsten arc welding", Materials Science and Technology, 2024 May
vol. -,
no. 0,
,
2024.
11
M. Abbasi, B. Bagheri Vanani, Ali Tahaei, Gian Luca Garagnani, "Influence of Ni and PWHT on microstructure evolution and mechanical properties of GTA-welded duplex stainless", Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 2024 Mar
vol. -,
no. 0,
pp.1-15,
2024.
12
Ali Tahaei, B. Bagheri Vanani, M. Abbasi, Ana Arizmendi-morquecho, "The hardfacing properties of the nickel-based coating deposited by the PTA process with the addition of wc nano-particles: Wear investigation", Tribology International, 2024 Feb
vol. 193,
no. 0,
pp.1-16,
2024.
13
Ali Tahaei, B. Bagheri Vanani, M. Abbasi, Gian Luca Garagnani, "A comparison of microstructure and mechanical characteristics correlation of the joint specimens for duplex stainless steel UNS S32304 and super-duplex stainless steel UNS S32750: The role of post-weld heat treatment", Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 2024 Feb
vol. -,
no. 0,
,
2024.
14
Ali Tahaei, B. Bagheri Vanani, M. Abbasi, Ana Arizmendi-morquecho, "A different attempt to investigate the influence of PTA parameters on microstructure evolution and mechanical characteristics of nickel base powder (Ni-WC) deposited tool steel", Journal of Materials Research and Technology-Jmr and T, 2023 Nov
vol. 27,
no. 2023,
pp.7970-7985,
2023.
15
Ali Tahaei, Ali Aghajani, M. Abbasi, B. Bagheri Vanani, Matia Merlin, Gian Luca Garagnani, "Effects of Predefined Thermomechanical Procedure on the Microstructure and Mechanical Properties of the Two-Way Shape Memory Effect in the NiTi Alloy", Advances In Materials Science and Engineering, 2023 Jun
vol. 2023,
no. 152483,
pp.1-11,
2023.
16
B. Bagheri Vanani, M. Abbasi, Farzaneh Sharifi, Amin Abdollahzadeh, "Investigation into novel multipass friction stir vibration brazing of carbon steels", Materials and Manufacturing Processes, 2022 Jun
vol. 37,
no. 8,
pp.921-932,
2022.
17
B. Bagheri Vanani, M. Abbasi, Farzaneh Sharifi, Amin Abdollahzadeh, "Different Attempt to Improve Friction Stir Brazing: Effect of Mechanical Vibration and Rotational Speed", Metals and Materials International, 2022 Jan
vol. 28,
no. 28,
pp.2239-2251,
2022.
18
Vahid Salimiyan Rizi, M. Abbasi, B. Bagheri Vanani, "Investigation on Intermetallic Compounds Formation and Effect of Reinforcing Particles during Friction Stir Vibration Brazing", Journal of Materials Engineering and Performance, 2021 Dec
vol. 31,
no. 4,
pp.3369-3381,
2021.
19
B. Bagheri Vanani, M. Abbasi, Farzaneh Sharifi, S.E. Mirsalehi, Ahmad Ostovari Moghaddam, "A modified version of friction stir welding process of aluminum alloys: Analyzing the thermal treatment and wear behavior", Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 2021 Jul
vol. 235,
no. 10,
pp.2291-2309,
2021.
aut.ac.ir