MAHMOUD SHAKERI - Amirkabir University of Technology

Special services: Faculty Members Students Graduates

Content

Pepole

Amirkabir University of Technology

Resume Service

MAHMOUD SHAKERI

Professor
Department of Mechanical Engineering
(Emeritus)

Download PDF فارسی

Email:

shakeri

aut.ac.ir

Phone:

h-index (Scopus):

Citations (Scopus):

3637

Supervised MSc Theses

Thesis title

Date

Dynamic analysis of a cylinder made of the shape memory alloy porous as an energy dissipation

Mahya Heidari & Mahmoud Shakeri

March 2019

Free vibration of doubly curved sandwich shells coupled with fluid

Iman Mohammad Ghadimi & Mahmoud Shakeri

July 2018

Dynamic analysis of conical shells reinforced by SMA wires

Leila Rezaei & Mahmoud Shakeri

June 2018

Optimization of Conical Composite Shell with Embedded SMA Wires

Arya Boustanpour & Mahmoud Shakeri

February 2018

Free vibration analysis of sandwich cylindrical shells with flowing fluid

Mahdi Chehreghani & Mahmoud Shakeri

October 2017

Three-dimensional analysis of functionally graded cylindrical panel under static and thermal load with different support conditions until yield

Mojtaba Khakpour Komarsofla & Mahmoud Shakeri

February 2017

Three dimentional solutions for a rectangularfunctional graded plate with different boundry conditions until yeilding

Saeid Nikbakht Nikabadi & Mahmoud Shakeri

February 2017

Elasto-plastic analysis of sandwich beam with foam core and isotropic faces under static loading

Mehrdad Movahedi & Mahmoud Shakeri

January 2017

Optimization of FGM plate with a shape memory alloy layer based on free vibration

Maryam Nasim Sobhan & Mahmoud Shakeri

October 2015

Optimization of SMA wires arrangements in a composite plate based on free vibration

Rayehe Karimi Mahabadi & Mahmoud Shakeri

October 2015

( Buckling Analysis on Welds in Pressure Vessels

Payam Seyedmonir & Mahmoud Shakeri

October 2015

Free vibration analysis of composite cylindrical panels with SMA wires

Ali Akbar Ansarifard & Mahmoud Shakeri

June 2015

Optimization of SMA fibers arrangement in cylindrical composite shell based on vibration

Mostafa Salim & Mahmoud Shakeri

March 2015

Thermal Buckling Analysis of composite Plates Reinforced with SMA Fibers

Mohamadreza Ebrahimi & Mahmoud Shakeri

October 2014

Optimization of piezoelectric in FGM cylindrical panel with PFRC layers using genetic algorithms

Saman Mohammad Nabi & Mahmoud Shakeri

October 2014

Vibration Analysis of sandwich plate containing shape memory alloy

Mohamad Hasan Samadpour & Mahmoud Shakeri

February 2014

Vibration Analysis of SMA Composite beams

Hamed Asadi & Mahmoud Shakeri

December 2013

Response of Low-Velocity Impact of Composite Plate Improved by SMA

Hamid Rashidi & Mahmoud Shakeri

October 2013

Buckling analysis of SMA rein forced composite beam

Hossein Abdollahi & Mahmoud Shakeri

October 2013

Analysis of laminated cylindrical panel (FGM) with piezoelectric layer under dynamic loads

Sina Bahrami & Mahmoud Shakeri

February 2013

Analysis of multi layered FGS cylindrical shell under thermo-mechanical loading

Atefeh Talebizad & Mahmoud Shakeri

February 2013

Analysis of mechanical shock absorber(corrugated tube) under axial loading

Reza Masoumi Asiabi & Mahmoud Shakeri

October 2012

Analysis of functionally graded steels(?M???) cylindrical panel under thermo -mechanical loading

Samaneh Isavand & Mahmoud Shakeri

October 2012

Theorical and Experimental Analysis of Parallel Tubes with Foam and without Foam under Axial Load

Saeed Sharifi & Mahmoud Shakeri

February 2012

Theoretical and experimental analysis of combined mechanical shock-absorbers under axial load

& Mahmoud Shakeri

February 2012

ِDynamic analysis of FGM panel with piezoelectric fiber reinforced composite

& Mahmoud Shakeri

February 2012

Optimization of geometrical dimensions of parallel and series metal pipes as a mechanical shock absorber

& Mahmoud Shakeri

May 2011

Analysis of FGM cylindrical panels with piezo electric layer under dynamical loading

Alireza Chitgarha & Mahmoud Shakeri

March 2011

Optimization of geometrical dimensions and stacking sequence of composite layers in metal-composite square tubes (as mechanical energy absorber)

Hossein Akbarshahi & Mahmoud Shakeri

March 2011

Investigation on the collapse of energy absorber corrugated tube under axial load

Arameh Eyvazian & Mahmoud Shakeri

September 2010

Analysis of FGM cylindrical shell with piezoelectric strip

Mohamad Hadi Hashemi & Mahmoud Shakeri

January 2010

Optimization of The length and distance of rings based on natural vibration

Sajjad Khazaeli & Mahmoud Shakeri

December 2009

Analysis of FGM cylindrical shells with piezoelectric layer

Mahdi Javanbakht & Mahmoud Shakeri

January 2009

Analysis of FGM Beam With Piezoelectric Layer and Patch Under Dynamic Load

Hesam Hatamikian & Mahmoud Shakeri

November 2008

Analysis of FGM Plate With a Piezoelectric Layer Under Dynamic Load

Seyednima Sadeghi & Mahmoud Shakeri

October 2008

DYNAMIC ANALYSIS OF FUNCTIONALLY GRADED MATERIAL (FGM) SHELL WITH PIEZOELECTRIC RING

Maryam Khanjani & Mahmoud Shakeri

November 2007

STAKING SEQUENCE OF MULTI-LAYERED CYLINDRICAL SHELLS BASED ON NATURAL VIBRATION USING NEURAL NETWORK AND GENETIC ALGORIT

Ahmad Gharib & Mahmoud Shakeri

February 2007

DESIGN OF A CYLINDRICAL SHOCK ABSORBER COMPOSED OF TWO DIFFERENT MATERIALS

Shahab Oldin Salehi Ghafari & Mahmoud Shakeri

October 2006

STACKING SEQUENCE OF MULTI-LAYERED PANEL BASED ON NATURAL VIBRATION, USING NEURAL

Morteza Abouhamze & Mahmoud Shakeri

October 2006

COLLAPSE MODEL ANALYSIS AND OPTIMIZATION OF TUBES UNDER AXIAL IMPACT LOAD

Reza Mirzaeifar & Mahmoud Shakeri

September 2006

Journal Papers

Portal Records

Mehran Javani, یاسر کیانی, Mahmoud Shakeri, Mohammad Reza Eslami, "A unified formulation for thermoviscoelasticity of hollow sphere based on the second sound theories", THIN-WALLED STRUCTURES, September 2020 Vol. 158, Num. 0, Page 1-9, September 2020,

Ali Ghasemi, Mahmoud Shakeri, Seyed.Ali Sadough Vanini, "A multi-objective optimization of energy absorption properties of thin-walled circular tube with combined bar extrusion under quasi-static axial loading: Experiments and numerical simulation", INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, May 2020 Vol. 180, Num. 0, Page 1-14, May 2020,

Saeid Nikbakht Nikabadi, Saeed Kamarian, Mahmoud Shakeri, "A review on optimization of composite structures Part I: Laminated composites", COMPOSITE STRUCTURES, March 2018 Vol. 195, Num. 0, Page 158-185, March 2018,

Saeid Nikbakht Nikabadi, S. Jedari Salami, Mahmoud Shakeri, "Three dimensional analysis of functionally graded plates up to yielding, using full layer-wise finite element method", COMPOSITE STRUCTURES, September 2017 Vol. 182, Num. 0, Page 99-115, September 2017,

Mostafa Salim, Mahdi Bodaghi, Saeed Kamarian, Mahmoud Shakeri, "FREE VIBRATION ANALYSIS AND DESIGN OPTIMIZATION OF SMA/GRAPHITE/EPOXY COMPOSITE SHELLS IN THERMAL ENVI-RONMENTS", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, September 2017 Vol. 0, Num. 0, Page 4-23, September 2017,

Saeed Kamarian, Mahmoud Shakeri, "Natural frequency analysis of composite skew plates with embedded shape memory alloys in thermal environment", , July 2017 Vol. 1, Num. 2, Page 179-190, July 2017,

Saeed Kamarian, Mahmoud Shakeri, Mohammad Hossein Yas, "Thermal buckling optimisation of composite plates using firefly algorithm", JOURNAL OF EXPERIMENTAL & THEORETICAL ARTIFICIAL INTELLIGENCE, July 2017 Vol. 29, Num. 4, Page 787-794, July 2017,

Saeed Kamarian, Mahmoud Shakeri, "Thermal buckling analysis and stacking sequence optimization of rectangular and skew shape memory alloy hybrid composite plates", COMPOSITES PART B-ENGINEERING, May 2017 Vol. 116, Num. 0, Page 137-152, May 2017,

Maryam Khanjani, Mahmoud Shakeri, Mojtaba Sadighi, "Nonlinear two dimensional finite element model for transient and damping analysis of cylindrical sandwich panels with pseudoelastic shape memory alloy composite face sheets", JOURNAL OF SANDWICH STRUCTURES & MATERIALS, January 2017 Vol. 0, Num. 0, Page 1-58, January 2017,

Mohammad Kavousi Sisi, Mahmoud Shakeri, Mojtaba Sadighi, "Dynamic Analysis of Asynchronous Low-Velocity Impacts on Laminated Composite Plate", , January 2017 Vol. 50, Num. 1, Page 47-62, January 2017,

Saeed Kamarian, Mahmoud Shakeri, Behrooz Karimi, Amin Pourasghar, "Free vibration analysis and design optimization of nanocomposite-laminated beams using various higher order beam theories and imperialist competitive algorithm", POLYMER COMPOSITES, August 2016 Vol. 37, Num. 8, Page 2442-2451, August 2016,

Saeed Kamarian, Mahmoud Shakeri, Mohammad Hossien Yas, "Natural frequency analysis and optimal design of CNT/fiber/polymer hybrid composites plates using mori?tanaka approach, GDQ technique, and firefly algorithm", POLYMER COMPOSITES, May 2016 Vol. 0, Num. 0, Page 1-14, May 2016,

Maryam Khanjani, Mahmoud Shakeri, Mojtaba Sadighi, "A parametric study on the stress analysis and transient response of thick-laminated-faced cylindrical sandwich panels with transversely flexible core", AEROSPACE SCIENCE AND TECHNOLOGY, January 2016 Vol. 48, Num. 0, Page 1-20, January 2016,

Rayehe Karimi Mahabadi, Mahmoud Shakeri, Mitra Danesh Pazhooh, "Free Vibration of Laminated Composite Plate with Shape Memory Alloy Fibers", LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, January 2016 Vol. 13, Num. 8, Page 314-330, January 2016,

Alireza Daman Pak Moghaddam, Mahdi Bodaghi, Liao, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "A simple and efficient 1-D macroscopic model for shape memory alloys considering ferro-elasticity effect", SMART STRUCTURES AND SYSTEMS, November 2015 Vol. 16, Num. 4, Page 641-665, November 2015,

Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Micromechanics of shape memory alloy fiber-reinforced composites subjected to multi-axial non-proportional loadings", JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, November 2015 Vol. 26, Num. 18, Page 2431-2445, November 2015,

S. Jedari Salami, S. Dariushi, Mojtaba Sadighi, Mahmoud Shakeri, "An advanced high-order theory for bending analysis of moderately thick faced sandwich beams", EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, October 2015 Vol. 56, Num. 0, Page 1-11, October 2015,

Sina Bahrami, Hamid Reza Ovesy, Mahmoud Shakeri, "Dynamic analysis of functionally graded circular cylindrical panel with piezoelectric fiber composite actuator and sensor", JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, October 2015 Vol. 26, Num. 17, Page 2369-2385, October 2015,

Maryam Khanjani, Mahmoud Shakeri, Mojtaba Sadighi, "Non-Linear Transient and damping analysis of a long cylindrical sandwich panel with embedded SMA wires", AEROSPACE SCIENCE AND TECHNOLOGY, September 2015 Vol. 47, Num. 0, Page 98-113, September 2015,

Mahdi Bodaghi, Alireza Daman Pak Moghaddam, Liao, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Modeling and analysis of reversible shape memory adaptive panels", JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, August 2015 Vol. 0, Num. 0, Page 1-26, August 2015,

Mohamadreza Ebrahimi, Ali Moeinfar, Mahmoud Shakeri, "Nonlinear Free Vibration of Hybrid Composite Moving Beams Embedded with Shape Memory Alloy Fibers", INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS, June 2015 Vol. 16, Num. 0, Page 1-16, June 2015,

Alireza Daman Pak Moghaddam, W.H. Liao, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, Mahdi Bodaghi, "Micro–macro thermo-mechanical analysis of axisymmetric shape memory alloy composite cylinders", COMPOSITE STRUCTURES, June 2015 Vol. 131, Num. 0, Page 1001-1016, June 2015,

Saeed Kamarian, Mahmoud Shakeri, Mh Yas, Mahdi Bodaghi, A Pourasghar, "Free vibration analysis of functionally graded nanocomposite sandwich beams resting on Pasternak foundation by considering the agglomeration effect of CNTs", JOURNAL OF SANDWICH STRUCTURES & MATERIALS, June 2015 Vol. 17, Num. 6, Page 632-665, June 2015,

Hossein Abdollahi, S . E . Esfahani, Mahmoud Shakeri, Mohammad Reza Eslami, "Non-Linear Thermal Stability Analysis of SMA Wire- Embedded Hybrid Laminated Composite Timoshenko Beams on Non-Linear Hardening Elastic Foundation", JOURNAL OF THERMAL STRESSES, February 2015 Vol. 38, Num. 3, Page 277-308, February 2015,

Hamed Asadi, Yasser Kiani Harchegani, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Enhanced thermal buckling of laminated composite cylindrical shells with shape memory alloy", JOURNAL OF COMPOSITE MATERIALS, February 2015 Vol. 0, Num. 0, Page 1-14, February 2015,

Sattar Jedari Salami, Mojtaba Sadighi, Mahmoud Shakeri, "Improved high order analysis of sandwich beams by considering a bilinear elasto-plastic behavior of core: An analytical and experimental investigation", INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, February 2015 Vol. 93, Num. 0, Page 270-289, February 2015,

Mahdi Bodaghi, Mahmoud Shakeri, Mohammad Mohammadi Aghdam, "Passive vibration control of plate structures using shape memory alloy ribbons", JOURNAL OF VIBRATION AND CONTROL, January 2015 Vol. 0, Num. 0, Page 1-20, January 2015,

Mahdi Bodaghi, Samaneh Isavand, Mahmoud Shakeri, Jamshid Aghazadeh Mohandesi, "Dynamic response of functionally gradient austenitic-ferritic steel composite panels under thermo-mechanical loadings", STEEL AND COMPOSITE STRUCTURES, January 2015 Vol. 18, Num. 1, Page 1-28, January 2015,

Saeed Sharifi, Mahmoud Shakeri, , Mahdi Bodaghi, "Experimental investigation of bitubal circular energy absorbers under quasi-static axial load", THIN-WALLED STRUCTURES, December 2014 Vol. 89, Num. 0, Page 42-53, December 2014,

Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Micromechanics of Shape Memory Alloy Fiber-reinforced Composites Subjected to Multi-axial Non-proportional Loadings", JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, November 2014 Vol. 0, Num. 0, Page 1-15, November 2014,

Sattar Jedari Salami, Mojtaba Sadighi, Mahmoud Shakeri, "Improved extended high order analysis of sandwich beams with a bilinear core shear behavior", JOURNAL OF SANDWICH STRUCTURES & MATERIALS, October 2014 Vol. 16, Num. 6, Page 633-668, October 2014,

Mohamad Hasan Samadpour, Mojtaba Sadighi, Mahmoud Shakeri, "Vibration analysis of thermally buckled SMA hybrid composite sandwich plate", COMPOSITE STRUCTURES, September 2014 Vol. 119, Num. 0, Page 251-263, September 2014,

Mahdi Bodaghi, Mahmoud Shakeri, Mohammad Mohammadi Aghdam, "Thermo-mechanical behavior of shape adaptive composite plates with surface-bonded shape memory alloy ribbons", COMPOSITE STRUCTURES, September 2014 Vol. 119, Num. 0, Page 115-133, September 2014,

Hamed Asadi, Yasser Kiani Harchegani, Mahmoud Shakeri, Mohammad Reza Eslami, "Exact Solution for Nonlinear Thermal Stability of Geometrically Imperfect Hybrid Laminated Composite Timoshenko Beams Embedded with SMA Fibers", JOURNAL OF ENGINEERING MECHANICS-ASCE, September 2014 Vol. 0, Num. 0, Page 0-0, September 2014,

Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Micro-mechanics of Composite with SMA Fibers Embedded in Metallic/Polymeric Matrix Under Off-axial Loadings", EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, September 2014 Vol. 49, Num. 0, Page 467-480, September 2014,

Saeed Kamarian, Mojtaba Sadighi, Mahmoud Shakeri, Mh Yas, "Free vibration response of sandwich cylindrical shells with functionally graded material face sheets resting on Pasternak foundation", JOURNAL OF SANDWICH STRUCTURES & MATERIALS, July 2014 Vol. 16, Num. 5, Page 511-533, July 2014,

Sattar Jedari Salami, Mojtaba Sadighi, Mahmoud Shakeri, "Geometrically nonlinear extended high order analysis for sandwich beams based on elastic–plastic core shear behavior", AEROSPACE SCIENCE AND TECHNOLOGY, July 2014 Vol. 39, Num. 0, Page 523-537, July 2014,

Hamed Asadi, Mahdi Bodaghi, Mahmoud Shakeri, Mohammad Mohammadi Aghdam, "Nonlinear Dynamics of SMA Fibers Reinforced Composite Beams Subjected to a Primary/Secondary- Resonance Excitation", ACTA MECHANICA, June 2014 Vol. 0, Num. 0, Page 0-0, June 2014,

Alireza Daman Pak Moghaddam, Mahdi Bodaghi, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Shape Control of Shape Memory Alloy Composite Beams in the Post-buckling Regime", AEROSPACE SCIENCE AND TECHNOLOGY, June 2014 Vol. 0, Num. 0, Page 0-0, June 2014,

Mahdi Bodaghi, Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "A robust three-dimensional phenomenological model for polycrystalline SMAs: Analytical closed-form solutions", INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, May 2014 Vol. 82, Num. 0, Page 1-21, May 2014,

Alireza Daman Pak Moghaddam, Mahdi Bodaghi, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "On the vibration control capability of shape memory alloy composite beams", COMPOSITE STRUCTURES, January 2014 Vol. 110, Num. 1, Page 325-334, January 2014,

Hamed Asadi, Yasser Kiani Harchegani, Mahmoud Shakeri, Mohammad Reza Eslami, "Exact Solution for Nonlinear Thermal Stability of Hybrid Laminated Composite Timoshenko Beams Reinforced with SMA Fibers", COMPOSITE STRUCTURES, January 2014 Vol. 108, Num. 0, Page 811-822, January 2014,

S. Jedari Salami, Mojtaba Sadighi, Mahmoud Shakeri, Mahdi Moeinfar, "An Investigation on Low Velocity Impact Response of Multilayer Sandwich Composite Structures", THE SCIENTIFIC WORLD JOURNAL, December 2013 Vol. 2013, Num. 175090, Page 1-9, December 2013,

Mahdi Bodaghi, Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Active shape/stress control of shape memory alloy laminated beams", COMPOSITES PART B-ENGINEERING, October 2013 Vol. 56, Num. 0, Page 889-899, October 2013,

Atefeh Talebizad, Samaneh Isavand, Mahdi Bodaghi, Mahmoud Shakeri, Jamshid Aghazadeh Mohandesi, "Thermo-mechanical behavior of cylindrical pressure vessels made of functionally graded austenitic/ferritic steels", INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, October 2013 Vol. 77, Num. 0, Page 171-183, October 2013,

Hamed Asadi, Mahdi Bodaghi, Mahmoud Shakeri, Mohammad Mohammadi Aghdam, "On the free vibration of thermally pre/post-buckled shear deformable SMA hybrid composite beams", AEROSPACE SCIENCE AND TECHNOLOGY, September 2013 Vol. 31, Num. 1, Page 73-86, September 2013,

Mahdi Bodaghi, Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "A phenomenological SMA model for combined axial-torsional proportional/non-proportional loading conditions", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, August 2013 Vol. 587, Num. 0, Page 12-26, August 2013,

Hamed Asadi, Mahdi Bodaghi, Mahmoud Shakeri, Mohammad Mohammadi Aghdam, "An analytical approach for nonlinear vibration and thermal stability of shape memory alloy hybrid laminated composite beams", EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, July 2013 Vol. 42, Num. 0, Page 454-468, July 2013,

Mahdi Bodaghi, Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Geometrically non-linear transient thermo-elastic response of FG beams integrated with a pair of FG piezoelectric sensors", COMPOSITE STRUCTURES, July 2013 Vol. 107, Num. 1, Page 48-59, July 2013,

Hamed Asadi, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Vibration analysis of axially moving line supported functionally graded plates with temperature-dependent properties", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, July 2013 Vol. 0, Num. 0, Page 0-0, July 2013,

Masoud Haghi Kashani, Hamid Shahsavari, Hossein Akbarshahi, Mahmoud Shakeri, "Bitubular square tubes with different arrangements under quasi-static axial compression loading", MATERIALS & DESIGN, May 2013 Vol. 51, Num. 0, Page 1095-1103, May 2013,

Alireza Daman Pak Moghaddam, Mahmoud Shakeri, Mohammad Mohammadi Aghdam, "A new finite element model for low-velocity impact analysis of sandwich beams subjected to multiple projectiles", COMPOSITE STRUCTURES, April 2013 Vol. 104, Num. 1, Page 21-33, April 2013,

Alireza Daman Pak Moghaddam, Mahdi Bodaghi, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Active control of geometrically non-linear transient response of sandwich beams with a flexible core using piezoelectric patches", COMPOSITE STRUCTURES, February 2013 Vol. 100, Num. 0, Page 517-531, February 2013,

M. Mirzaei, Hossein Akbarshahi, Mahmoud Shakeri, Mojtaba Sadighi, "Multidisciplinary Optimization of Collapsible Cylindrical Energy Absorbers under Axial Impact Load", STRUCTURAL ENGINEERING AND MECHANICS, October 2012 Vol. 44, Num. 3, Page 325-337, October 2012,

Mahdi Bodaghi, Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Nonlinear active control of FG beams in thermal environments subjected to blast loads with integrated FGP sensor/actuator layers", COMPOSITE STRUCTURES, July 2012 Vol. 94, Num. 10, Page 3612-3623, July 2012,

A. Jalali Aghchai, Mahmoud Shakeri, Bijan Mollaei Dariani, "Influences of material properties of components on formability of two-layer metalic sheets", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, July 2012 Vol. 24, Num. 10, Page 1-16, July 2012,

Yasser Kiani Harchegani, Mahmoud Shakeri, Mohammad Reza Eslami, "Thermoelastic free vibration and dynamic behaviour of an FGM doubly curved panel via the analytical hybrid Laplace–Fourier transformation", ACTA MECHANICA, May 2012 Vol. 223, Num. 6, Page 1199-1218, May 2012,

Mostafa Mirzaei, Mahmoud Shakeri, Mojtaba Sadighi, Hossein Akbarshahi, "Experimental and analytical assessment of axial crushing of circular hybrid tubes under quasi-static load", COMPOSITE STRUCTURES, April 2012 Vol. 94, Num. 6, Page 1959-1966, April 2012,

Ehsan Ameri, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Global optimization of laminated cylindrical panels based on fundamental natural frequency", COMPOSITE STRUCTURES, April 2012 Vol. 0, Num. 0, Page 0-0, April 2012,

Mahdi Bodaghi, Mahmoud Shakeri, "An analytical approach for free vibration and transient response of functionally graded piezoelectric cylindrical panels subjected to impulsive loads", COMPOSITE STRUCTURES, April 2012 Vol. 94, Num. 5, Page 1721-1735, April 2012,

Mehdi Javanbakht, Ali Reza Daneshmehr, Mahmoud Shakeri, Ali Nateghi, "The dynamic analysis of the functionally graded piezoelectric (FGP) shell panel based on three-dimensional elasticity theory", APPLIED MATHEMATICAL MODELLING, March 2012 Vol. 0, Num. 0, Page 1-14, March 2012,

Arameh Eyvazian, Iman Akbarzadeh, Mahmoud Shakeri, "Experimental study of corrugated tubes under lateral loading", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, January 2012 Vol. 226, Num. 0, Page 119-143, January 2012,

Mahdi Javanbakht, Mahmoud Shakeri, Seyednima Sadeghi, A R Daneshmehr, "The Analysis of Functionally Graded Shallow and Non-shallow Shell Panels With Piezoelectric Layers under Dynamic Load and Eelectrostatic Excitation Based on Elasticity", EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, November 2011 Vol. 30, Num. 6, Page 983-991, November 2011,

Mostafa Mirzaee, Mahmoud Shakeri, Mojtaba Sadighi, Hossein Akbarshahi, "Crashworthiness Design for Cylindrical Tube using Neural Network and Genetic Algorithm", Procedia Engineering, October 2011 Vol. 14, Num. 0, Page 3346-3353, October 2011,

Reza Mirzaefar, Mahmoud Shakeri, R.Desroches, Arash Yavari, "A semi-analytic analysis of shape memory alloy thick-walled cylinders under internal pressure", ARCHIVE OF APPLIED MECHANICS, August 2011 Vol. 81, Num. 8, Page 1093-1116, August 2011,

Mahmoud Shakeri, Soroush Sadeghnejad, Hamid Shahsavari, "Study on New & Smart Materials (FGM, FGPM, SMA & PM) and their applications in Iran and some foreign countries", , May 2011 Vol. 13, Num. 49, Page 131-151, May 2011,

Mohammad Hosin Yas, Mahmoud Shakeri, Maryam Khanjani, "Layer-wise finite-element analysis of a functionally graded hollow thick cylinder with a piezoelectric ring", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, May 2011 Vol. 225, Num. 5, Page 1045-1060, May 2011,

Mohammad Hossin Yas , Mahmoud Shakeri, Mahmoud Heshmati, Samira Mohammadi, "Layer-wise Finite Element Analysis of Functionally Graded Cylinrical Shell under Dynamic Load", JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, April 2011 Vol. 25, Num. 3, Page 597-604, April 2011,

M.Merzaei, Mahmoud Shakeri, Mojtaba Sadighi,, "Multi-objective Optimization of Crashworthiness of Cylindrical Tubes as Energy Absorbers", Iranian Journal of Mechanical Engineering, March 2011 Vol. 12, Num. 1, Page 5-17, March 2011,

Hossein Akbarshahi, Mojtaba Sadighi, Mahmoud Shakeri, Mostafa Mirzaee, "Mathematical Model for Axial Crushing of Hybrid Square Tubes", Key Engineering Materials, February 2011 Vol. 471-472, Num. 0, Page 664-669, February 2011,

Mahdi Afshin, Mojtaba Sadighi, Mahmoud Shakeri, "Free-Edge Effects in a Cylindrical Sandwich Panel with a Flexible Core and Laminated Composite Face Sheets", Mechanics of Composite Materials, November 2010 Vol. 46, Num. 5, Page 0-0, November 2010,

Mahdi Afshin, Mojtaba Sadighi, Mahmoud Shakeri, "Vibration and damping analysis of cylindrical sandwich panels containing a viscoelastic flexible core", Journal of Sandwich Structures and Materials, September 2010 Vol. 0, Num. 0, Page 0-0, September 2010,

Babak Mirzavand Boroujeni, Mohammad Reza Eslami, Mahmoud Shakeri, "Dynamic thermal postbuckling analysis of piezoelectric functionally graded cylindrical shells", Journal of Thermal Stresses, August 2010 Vol. 33, Num. 7, Page 0-0, August 2010,

Mahdi Afshin, Mojtaba Sadighi, Mahmoud Shakeri, "Static Analysis of Cylindrical Sandwich Panels with a Flexible Core and Laminated Composite Face Sheets", JOURNAL OF COMPOSITE MATERIALS, June 2010 Vol. 44, Num. 12, Page 1455-1476, June 2010,

Arash Behroozi, Bijan Mollaei Dariani, Mahmoud Shakeri, "Tool shape design in V-bending and channel forming processes by inverse analysis of springback", Inverse Problems in Science and Engineering, March 2010 Vol. 0, Num. 0, Page 0-0, March 2010,

Arash Behroozi, Bijan Mollaei Dariani, Mahmoud Shakeri, "Die Shape Design in Channel Forming Process by Compensation of Springback Error", Mejlesi Journal of Mechanical Engineering, February 2010 Vol. 3, Num. 2, Page 0-0, February 2010,

Mohammad Javad Mahmoodi, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Micromechanical modeling of interface damage of metal matrix composites subjected to off-axis loading", , February 2010 Vol. , Num. 31, Page 0-0, February 2010,

Mohammad Javad Mahmoodi, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "The effects of interfacial debonding on the elastoplastic response of unidirectional silicon carbide–titanium composites", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, October 2009 Vol. 224, Num. 2, Page 0-0, October 2009,

Mahdi Javanbakht, Mahmoud Shakeri, Seyednima Sadeghi, "Dynamic analysis of functionally graded shell with piezoelectric layers based on elasticity", , September 2009 Vol. , Num. 9, Page 0-0, September 2009,

Akbar Alibeiklou, Mahmoud Shakeri, "Static Analyis of Anisotropic Laminated Cylindrical Shell With Piezoelectric Layers", , September 2009 Vol. , Num. 16, Page 0-0, September 2009,

Akbar Alibeiklou, Mahmoud Shakeri, "Three-Dimensional Elasticity Solution for Laminated Cross -Ply Panels Under Localized Dynamic Moment", , June 2009 Vol. , Num. 3, Page 0-0, June 2009,

Mahmoud Shakeri, Rashid Mirzavandeborojeni, "Static and Dynamic Analysis of Thick Functionally Graded Plates with Piezoelectric Layers Using Layerwise Finite Element Model", , May 2009 Vol. , Num. 16, Page 0-0, May 2009,

Arash Behroozi, Bijan Mollaei Dariani, Mahmoud Shakeri, "Tool Shape Design in the Sheet Bending Process by Inverse Analysis of Springback", , April 2009 Vol. , Num. 223, Page 0-0, April 2009,

Seyed Mohamadreza Sedighi Saber, Mahmoud Shakeri, "A Three -Dimensional Elasticity Solution of Functionally Graded Piezoelectric Cylindrical Panels", , April 2009 Vol. , Num. 18, Page 0-0, April 2009,

Mahmoud Shakeri, Seyednima Sadeghi, Mahdi Javanbakht, Hesam Hatamikian, "Dynamic Analysis of Functionally Graded Plate Integrated With Two Piezoelectric Layers Based On Three - Dimensional Elasticity Solution", , March 2009 Vol. , Num. 223, Page 0-0, March 2009,

Akbar Alibeiklou, Mahmoud Shakeri, "Elasticity solution for static analysis of laminated cylindrical panel using differential quadrature method", , January 2009 Vol. , Num. 31, Page 0-0, January 2009,

Mohammad Reza Saviz, Mahmoud Shakeri, Mohammad Hosein Yas, "Layerwise Finite Element Analysis of Laminated Cylindrical Shell with Piezoelectric Rings Under Dynamic Load", , January 2009 Vol. , Num. 16, Page 0-0, January 2009,

Reza Mirzaeifar, Mahmoud Shakeri, Mojtaba Sadighi, "Nonlinear Finite Element Formulation for Analyzing Shape Memory Alloy Cylindrical Panels", , January 2009 Vol. , Num. 18, Page 0-0, January 2009,

M. H. Yas, Mahmoud Shakeri, N. Khaksar, "Stacking sequence optimization of a composite cylindrical shell for vibrations by hybrid continuous optimization", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, November 2008 Vol. 222, Num. 12, Page 2385-2394, November 2008,

Arash Behroozi, Bijan Mollaei Dariani, Mahmoud Shakeri, "A New Approach for Inverse Analysis of Springback in a Sheet-Bending Process", , October 2008 Vol. , Num. 222, Page 0-0, October 2008,

Seyed Mahdi Hosseini, Mehdi Akhlaghi, Mahmoud Shakeri, "Heat Conduction and Heat Wave Propagation in Functionally Graded Thick Hollow Cylinder Base on Coupled Thermoelasticity Without Energy Dissipation", , September 2008 Vol. , Num. 44, Page 0-0, September 2008,

Abdol Hossein Jalali Aghchai, Mahmoud Shakeri, Bijan Mollaei Dariani, "Theoritical and Experimental Formability Study of Two-Layer Metallic Sheet (Al1100/St12)", , September 2008 Vol. , Num. 222, Page 0-0, September 2008,

Samrand Rash Ahmadi, Mahmoud Shakeri, Seyed.Ali Sadough Vanini, "Stress analysis in thin coatings and substrate subjected to point contact loading (mechanics of scratch test)", , August 2008 Vol. , Num. 205, Page 0-0, August 2008,

Seyed Mohamadreza Sedighi Saber, Mahmoud Shakeri, Ali Reza Danesh Mehr, "Three- Dimensional Elasticity Solution of single Layer piezoelectric panel", , March 2008 Vol. , Num. 8, Page 0-0, March 2008,

Akbar Alibeiklou, Mahmoud Shakeri, "Free vibration analysis of antisymmetric laminated rectangular plates with distributed patch mass using third-order shear deformation theory", , February 2008 Vol. , Num. 35, Page 0-0, February 2008,

Mahmoud Shakeri, Seyed.Ali Sadough Vanini, Samrand Rash Ahmadi, "Elastic stress analysis of bi-layered isotropic coatings and substrate subjected to line scratch indentation", , January 2008 Vol. , Num. 196, Page 0-0, January 2008,

Morteza Abouhamze, Mahmoud Shakeri, "Multi-objective stacking sequence optimization of laminated cylindrical panels using a genetic algorithm and neural networks", , November 2007 Vol. , Num. 81, Page 0-0, November 2007,

Akbar Alibeiklou, Mahmoud Shakeri, "Elasticity solution for the free vibration analysis of laminated cylindrical panels using the differential quadrature method", , November 2007 Vol. , Num. 81, Page 0-0, November 2007,

100

Ali Reza Danesh Mehr, Mahmoud Shakeri, "Three-dimensional elasticity solution of cross-ply shallow and non-shallow panels with piezoelectric sensors under dynamic load", , October 2007 Vol. , Num. 80, Page 0-0, October 2007,

101

Seyed Mahdi Hosseini, Mehdi Akhlaghi, Mahmoud Shakeri, "Coupled Thermoelasticity of Functionally Graded Thick Hollow Cylinders (Without Energy Dissipation)", , October 2007 Vol. , Num. 31, Page 0-0, October 2007,

102

Mahmoud Shakeri, Reza Mirzaeifar, Shahab Oldin Salehi Ghafari, "New Insights into The Collapsing of Cylindrical Thin-Walled Tubes Under Axial Impact Load", , August 2007 Vol. , Num. 221, Page 0-0, August 2007,

103

Seyed Mahmoud Hosseini, Mehdi Akhlaghi, Mahmoud Shakeri, "Dynamic Response and Radial Wave Propagation Velocity in Thick Hollow Cylinder made of Functionally Graded Materials", , June 2007 Vol. , Num. 3, Page 0-0, June 2007,

104

Mahmoud Shakeri, Seyed.Ali Sadough Vanini, "Elastic stress analysis of bi-layered isotropic coatings and substrate subjected to line scratch indentation", , June 2007 Vol. , Num. , Page 0-0, June 2007,

105

Seyed Mahmoud Hosseini, Mehdi Akhlaghi, Mahmoud Shakeri, "Transient Heat Conduction in Functionally Graded Thick Hollow Cylinders by Analytical Method", , May 2007 Vol. , Num. 1, Page 0-0, May 2007,

106

Akbar Alibeiklou, Mahmoud Shakeri, Abedin Morowat Halabi, "Optimal Stacking Sequence of Laminated Anisotropic Cylindrical Panel Using Genetic Algorithm", , April 2007 Vol. , Num. 6, Page 0-0, April 2007,

107

Akbar Alibeiklou, Mahmoud Shakeri, "Three-Dimensional Elasticity Solution for Laminated Cross-Ply Panel Under Localized Moment", , January 2007 Vol. , Num. 221, Page 0-0, January 2007,

108

Mohammad Reza Saviz, Mahmoud Shakeri, Mohmadhosain Yass, "Electroelastic Fields in a Layered Piezoelectric Cylindrical Shell Under Dynamic Load", , January 2007 Vol. , Num. 16, Page 0-0, January 2007,

109

Mohammad Hosein Yas, Mahmoud Shakeri, "Natural Frequency Optimization of Laminated Cylindrical Shell Subjected to Tsai-Hill Failure Criteria Constraint Using Penalty Method", , January 2007 Vol. , Num. 9, Page 0-0, January 2007,

110

Mohammad Hosein Yas, Mahmoud Shakeri, Mohammad Reza Saviz, "Elasticity Solution of Laminated Cylindrical Shell With Piezoelectric Layer Under Local Ring Load", , January 2007 Vol. , Num. 1, Page 0-0, January 2007,

111

Mahmoud Shakeri, Shahab Oldin Salehi Ghafari, Reza Mirzaeifar, "Expansion of Circular Tubes by Rigid Tubes as Impact Energy Absorbers :Experimental and Theoretical Investigation", , January 2007 Vol. , Num. 5, Page 0-0, January 2007,

112

Mahmoud Shakeri, Mehdi Akhlaghi, Seyed Mahmoud Hosseini, "Vibration and Radial Wave Propagation Velocity in Functionally Graded Thick Hollow Cylinder", , September 2006 Vol. , Num. 76, Page 0-0, September 2006,

113

Mahmoud Shakeri, Mohammad Reza Eslami, Ali Reza Danesh Mehr, "Dynamic Analysis of Thick Laminated Shell Panel With Piezoelectric Layer Based on Three Dimensional Elasticity Solution", , September 2006 Vol. , Num. 84, Page 0-0, September 2006,

114

Mahmoud Shakeri, Mohammad Hosein Yas, Mehdi Ghasemi Gol, "Optimal Stacking Sequence of Laminated Cylindrical Shells Using Genetic Algorithm", , July 2005 Vol. , Num. 12, Page 0-0, July 2005,

115

Mahmoud Shakeri, Akbar Alibeiklou, "Dynamic Analysis of Orthotropic Laminated Cylindrical Panels", , February 2005 Vol. , Num. 1, Page 0-0, February 2005,

116

Mahmoud Shakeri, Ali Reza Danesh Mehr, "Pizoelasticity solution for thick laminated cylindrical panel.", , January 2004 Vol. , Num. 5, Page 0-0, January 2004,

117

Behrouz Shiari, Mohammad Reza Eslami, Mahmoud Shakeri, "Thermomechanical shocks in composite cylindrical shells:A coupled thermoelastic finite element analysis", , March 2003 Vol. , Num. 1, Page 0-0, March 2003,

118

Mahmoud Shakeri, Mohammad Hosein Yas, "three-dimensional axisymmetric vibrations of orthotropic and cross-ply laminated hemispherical shells", , December 2002 Vol. , Num. 26, Page 0-0, December 2002,

119

Mahmoud Shakeri, Mohammad Reza Eslami, Akbar Alibeiklou, "Analysis of multi-layered shallow panels under dynamic thermal load based on the theory of elasticity", , December 2002 Vol. , Num. , Page 0-0, December 2002,

120

Akbar Alibeiklou, Mahmoud Shakeri, Mohammad Reza Eslami, "Elasticity solution for thick laminated anisotropic cylindrical panels under dynamic loads", , December 2002 Vol. , Num. , Page 0-0, December 2002,

121

Manouchehr Salehi, Mahmoud Shakeri, Seyyed Hojjat Hashemi, "Analysis of thick rectangular plates with large deformations using Dynamic Relaxation Method", Iranian Journal of Mechanical Engineering, Transactions of ISME, September 2002 Vol. , Num. 1, Page 0-0, September 2002,

122

Manouchehr Salehi, Mahmoud Shakeri, Hassan Hashamy, "DR large deflection analysis of moderately thick rectangular plates", Iranian Journal of mechanical engineering, July 2002 Vol. , Num. 1, Page 0-0, July 2002,

123

Mahmoud Shakeri, Mohammad Reza Eslami, Akbar Alibeiklou, "Three-dimensional elasticity solution of orthotropic cylinrical panels under dynamic loads", , June 2002 Vol. 0, Num. 50, Page 0-0, June 2002,

124

Mahmoud Shakeri, Mohammad Reza Eslami, Akbar Alibeiklou, "Elasticity solution of multi-Layered shallow cylindrical panels subjected to dynamic loading", , June 2002 Vol. , Num. 3, Page 0-0, June 2002,

125

Akbar Alibeiklou, Mahmoud Shakeri, Mohammad Reza Eslami, "Elasticity solution for thick laminated circular cylindrical shallow and non-shallow pannels under dynamic load", , December 2001 Vol. , Num. , Page 0-0, December 2001,

126

Mohammad Reza Eslami, Mohammadreza Ghorbani, Mahmoud Shakeri, "Thermoelastic buckling of thin spherical shells", , December 2001 Vol. , Num. 24, Page 0-0, December 2001,

127

Mahmoud Shakeri, Mohammad Reza Eslami, Akbar Alibeiklou, "Dynamic analysis of orthotropic cylindrical panal", , March 2001 Vol. , Num. 1, Page 0-0, March 2001,

128

Seyed.Ali Sadough Vanini, Mahmoud Shakeri, Bijan Mollaei Dariani, "Effect of grain size and prestraining on the sheet metal formability limits", , October 2000 Vol. , Num. , Page 0-0, October 2000,

129

Seyed.Ali Sadough Vanini, Mahmoud Shakeri, Bijan Mollaei Dariani, "Teoretical and experimental analysis of sheet metal formability limits", La Revue Metallurgie, May 2000 Vol. 0, Num. 0, Page 0-0, May 2000,

130

Mahmoud Shakeri, Seyed.Ali Sadough Vanini, Bijan Mollaei Dariani, "Optimal blank holder force in the deep drawing process", , March 2000 Vol. , Num. , Page 0-0, March 2000,

131

Mohammad Reza Eslami, Mohammad Shariat, Mahmoud Shakeri, "Elastic_plastic dynamic bukling analysis of imperfect cylindrical shells", , March 2000 Vol. 0, Num. 42, Page 0-0, March 2000,

132

Seyed.Ali Sadough Vanini, Mahmoud Shakeri, Bijan Mollaei Dariani, "Analysis experimengal et theorrique de la limite de formage des toles metalliques", , March 2000 Vol. 0, Num. 0, Page 0-0, March 2000,

133

Mahmoud Shakeri, Mohammad Reza Eslami, Mohammad Hosein Yas, "Elasticity solution of laminated composite orthotropic shells under blast load", , March 2000 Vol. , Num. , Page 0-0, March 2000,

134

Seyed.Ali Sadough Vanini, Mahmoud Shakeri, Bijan Mollaei Dariani, "Effect of pre-straining and grain size on the limit strains in sheet metal forming", , January 2000 Vol. , Num. , Page 0-0, January 2000,

135

Mohammad Reza Eslami, Mahmoud Shakeri, Abdolreza Ohadi Hamadani, Behrooz Shiary, "Coupled thermoelasticity of shells of revolution : Effect of normal stress and coupling", , April 1999 Vol. , Num. 2, Page 0-0, April 1999,

136

Mohammad Reza Eslami, Mahmoud Shakeri, Mohammad Hosein Yas, "Elasticity solution and free vibrations analysis of laminated anisotoropic cylindrieal shells", , February 1999 Vol. , Num. 6, Page 0-0, February 1999,

137

Mohammad Reza Eslami, Mahmoud Shakeri, Mohammad Shariat, "Layer wise theory for dynamic buckling and postbuckling of laminated composite cylindrical shells", , October 1998 Vol. , Num. , Page 0-0, October 1998,

138

Mohammad Reza Eslami, Mahmood Shariat Panahi, Mahmoud Shakeri, "A general layer - wise theory for dynamic bucking and post - buckling of laminated composite cylindrical shell", , January 1998 Vol. , Num. 10, Page 0-0, January 1998,

139

Mohammad Mohammadi Aghdam, Mahmoud Shakeri, Shahriar Fariborz, "Solution to the reissner plate with clamed edges", , July 1996 Vol. , Num. 122, Page 0-0, July 1996,

140

Mohammad Reza Eslami, Mahmoud Shakeri, Ramin Sedaghati, "Coupled thermoelasticity of an axially symmetric cylindrical shells", , March 1994 Vol. , Num. , Page 0-0, March 1994,

141

Mohammad Reza Eslami, Mahmoud Shakeri, Ramin Sedaghati, "Coupled thermoelasticity of an axially symmetric cylindrical shells ( vol 17 )", , January 1994 Vol. , Num. 17, Page 0-0, January 1994,

142

Mahmoud Shakeri, Shahriar Fariborz, Mohammad Mohammadi Aghdam, "Application of extended kantorovich method to the bending of reissner ,s plate", , January 1991 Vol. 0, Num. 18, Page 0-0, January 1991,

143

Mahmoud Shakeri, "Powder compaction by electrical discharge , expalanation of ....", , January 1991 Vol. 0, Num. 16, Page 0-0, January 1991,

144

[en-name N/A], Mahmoud Shakeri, Hamidreza Daghyani, "Dynamic compacting of metal powders", , January 1990 Vol. 0, Num. 15, Page 0-0, January 1990,

145

Mahmoud Shakeri, Mijid Sadeghitorbat, Hamidreza Daghyani, "The effect of pressure and powder particle size on the mechanical properties of green productions", , January 1990 Vol. 0, Num. 4, Page 0-0, January 1990,

146

Mahmoud Shakeri, "Electrical discharge powder compaction", , January 1989 Vol. 0, Num. 11, Page 0-0, January 1989,

147

Mahmoud Shakeri, Bijan Mollaei Dariani, "Effect of discharge voltage on green strength in electrical dicharge powder compaction", , January 1989 Vol. 0, Num. 12, Page 0-0, January 1989,

Conference Papers

Portal Records

Mahdi Chehreghani, Mitra Danesh Pazhooh, Mahmoud Shakeri, "Free Vibration of a Fluid- Filled Sandwich Cylindrical Shell ", ISAV2017, November 2017

Mohammad Kavousi Sisi, Mahmoud Shakeri, Mojtaba Sadighi, "Dynamic Response of Composite Laminated Beams Under Asynchronous Low-Velocity Impacts ", Second International Conference on Composites, Biocomposites and Nanocomposites, October 2015

Mahmoud Shakeri, Mojtaba Sadighi, Maryam Khanjani, "A parametric Study on the Static and Dynamic Response of Long Sandwich Cylindrical Panels with Transversely Flexible Core ", Second International Conference on Composites, Biocomposites and Nanocomposites, October 2015

Maryam Khanjani, Mahmoud Shakeri, Mojtaba Sadighi, "Higher-order Stress Analysis of Cylindrical Sandwich Panels with Transversely Flexible Core ", 2nd International Conference on Electrical, Computer, Mechanical and Mechatronics Engineering, August 2015

Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Dynamic Analysis of Delaminated sandwich Beam by using of Five Layeres Element ", The 22nd Annual International Conference on Mechanical Engineering, April 2014

Saeed Kamarian, Mahdi Bodaghi, Mahmoud Shakeri, "Free vibration analysis of functionally graded sandwich panels based on the 3-D theory of elasticity ", The 22nd Annual International Conference on Mechanical Engineering, April 2014

Mohamad Hasan Samadpour, Mojtaba Sadighi, Mahmoud Shakeri, "ّForced vibration of sandwich beam embedded with SMA wires: High order approach ", International Conference on Mechanical Engineering, April 2014

Hamid Rashidi, Mahdi Bodaghi, Mahmoud Shakeri, "The effect of shape memory alloy on the strength of composite plate under low velocity impact ", The 13th conference of Iranian Aerospace Society, March 2014

Hamid Rashidi, Mahdi Bodaghi, Mahmoud Shakeri, "SMA fiber-reinforced composite plate behavior against low velocity impact ", The national conference on mechanical engineering of Iran, February 2014

Saeed Sharifi, Mahmoud Shakeri,, "Experimental And Numerical Investigation Of Parallel Mechanical Energy Absorbers ", 21st International Conference on Mechanical Engineering, May 2013

Samaneh Isavand, Mahmoud Shakeri, Jamshid Aghazadeh Mohandesi, "Analysis of Functionally Graded Steel with Threelayer Arrangement under Mechanical and Thermal Lodde ", 21st International Conference on Mechanical Engineering-ISME 2013, May 2013

Atefeh Talebizad, Mahmoud Shakeri, Jamshid Aghazadeh Mohandesi, "Thermoelasticity Analysis of Functionally Graded Steel Cylindrical Shells ", 21st International Conference on Mechanical Engineering- ISME 2013, May 2013

Samaneh Isavand, Mahmoud Shakeri, Jamshid Aghazadeh Mohandesi, "Analysis of a cylindrical steel shells under dynamic load times and thermal ", 12th Conference of Iranian Aerospace Society- AERO2013, February 2013

M.Mirzaei, Hossein Akbarshahi, Mahmoud Shakeri, Mojtaba Sadighi, "A new approach to the experimental investigation of axial crushing of circular hybrid tubes quasi-static loading ", The 3rd international conference on composites: characterization,fabrication and application (CCFA-3), December 2012

Sattar Jedari Salami, Mojtaba Sadighi, Mahmoud Shakeri, "Development and elastic analysis of a smart composite pipe joint system incorporated with piezoelectric layers under torsion ", The 3rd international conference on composites: characterization,fabrication and application (CCFA-3), December 2012

Ehsan Ameri, Mahmoud Shakeri, Mohammad Mohammadi Aghdam, "Implementation of the Globalized Nelder-?Mead method on fundamental frequency maximization of cylindrical panels ", 16th Int. Conf. on Composite Structures, June 2011

Mostafa Mirzaee, Hossein Akbarshahi, Mahmoud Shakeri, Mojtaba Sadighi, "Theoretical Model for Collapsing of Hybrid Circular Tubes Under Axial Load ", 16th International Conference on Composite Structures ICCS16, June 2011

Alireza Chitgarha, Mahmoud Shakeri, "A Three-Dimensional Elasticity Solution of Functionally Graded Material with Piezothermoelastic Layer ", 16th International Conference on Composite Structures ICCS16, June 2011

Mostafa Mirzaee, Mahmoud Shakeri, Mojtaba Sadighi, Hossein Akbarshahi, "Crashworthiness Design for Cylindrical Tube Using Neural Network and Genetic Algorithm ", The Twelfth East Asia-Pacific Conference on Structural Engineering and Construction, January 2011

Seyed.Ali Sadough Vanini, Samrand Rash Ahmadi, Mahmoud Shakeri, "Crack propagation in thin coatings subjected to contact loading using dislocation method ", MATERIAUX 2010, October 2010

Ahmad Gharib, Mahmoud Shakeri, "Stacking sequence optimization of laminated cylindrical shells for buckling and free vibration using genetic algorithm and neural networks ", 2nd International Conference on Engineering Optimization, September 2010

Mahmoud Shakeri, Mojtaba Sadighi, Mostafa Mirzaee, "Using of Neural network and genitic algorithm in multiobjective optimization of coolapsible energy absorbers ", 2nd International Conference on Engineering Optimization, September 2010

Mostafa Mirzaee, Mahmoud Shakeri, Mojtaba Sadighi,, "Using of netural network and genetic algorithm in multiobjective optimization of collaosible energy absobers ", 2nd International Conference on Engineering optimization, September 2010

Arameh Eyvazian, Mahmoud Shakeri, Mohsen Zarei Mahmoodabadi, "Experimental Study of Corrugated Tubes under Lateral Loading ", 10th Biennial Conference on Engineering Systems Design and Analysis ESDA2010, July 2010

Arameh Eyvazian, Mahmoud Shakeri, Mohsen Zarei Mahmoodabadi, "Experimental study of Corrugated Tubes Under Lateral Loading ", Proceding of the 10 th Biennial International Conference on Engineering Systems Design and Analysis, July 2010

Samrand Rash Ahmadi, Seyed.Ali Sadough Vanini, Mahmoud Shakeri, "Investigation of the coated system with crack normal to surface subjected to contact loading ", SF2M Annual Meeting - JA2010, June 2010

Samrand Rash Ahmadi, Seyed.Ali Sadough Vanini, Mahmoud Shakeri, "Stress distribution in thin coatings subjected to cylindrical contact loading ", SF2M Annual Meeting - JA2010, June 2010

Mahdi Afshin, Mojtaba Sadighi, Mahmoud Shakeri, "Free edge effects in a cylindrical sandwich panel with a flexible core and laminated composite face sheets ", The XVI International conference on mechanics of composite materials, May 2010

Mahmoud Shakeri, Reza Mirzaeifar, Mojtaba Sadighi, "The effect of various bounary conditions on phase transformation in shape memory alloy cylindrical panels ", , July 2009

Mahmoud Shakeri, Mohammad Javad Mahmoodi, Mohammad Mohammadi Aghdam, "Micromechanical analysis of initial yielding of fiber reinforced composites subjected to various loading conditions ", , June 2009

Mohammad Javad Mahmoodi, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Micromechanics of randomly distributed fiber reinforced polymer matrix composites with transversely isotropic constituents ", , June 2009

Mahmoud Shakeri, Bijan Mollaei Dariani, Abdol Hossein Jalali Aghchai, "Finite element analyis of formability of metallic sheets based on M K model comparing the results with theoretical and experimental ones ", , March 2009

Abdol Hossein Jalali Aghchai, Mahmoud Shakeri, Bijan Mollaei Dariani, "Theoretical and experimental investigation and analysis on formability of all 100 st12 two layer sheet based on equivalient layer model ", , March 2009

Arash Behroozi, Bijan Mollaei Dariani, Mahmoud Shakeri, "Correction of die surface to compensate springback error in sheet forming process by inverse sprinback analysis ", , March 2009

Mahmoud Shakeri, Mohammad Mohammadi Aghdam, Mohammad Javad Mahmoodi, "Overal properties of randomly distributed particle reinforced composites using simplified unit cell model ", , January 2009

Mahmoud Shakeri, Bijan Mollaei Dariani, "Three dimensional elasticty solution for transversally loaded of simply supported fuctionally graded plates using multi layer method ", , September 2008

Mahmoud Shakeri, "Study of finite fuctionally graded shell panel with piezoelectric layers under dynamic loading based on elasticity ", , September 2008

Arash Behroozi, Mahmoud Shakeri, Bijan Mollaei Dariani, "Inverse analysis of springback in sheet metal forming by finite element method ", , June 2008

Mahmoud Shakeri, Reza Mirzaeifar, "Stress analysis of thick functionally graded plates with piesoelectric layers under static loading using layerwise finite element model ", , May 2008

Arash Behroozi, Mahmoud Shakeri, "Inverse analysis of springback in sheet metal forming by finite element method ", , May 2008

Abdol Hossein Jalali Aghchai, Mahmoud Shakeri, Bijan Mollaei Dariani, "Investigation and analysis of formability of AL1100/St12 sheet considering properties of layers separately ", , May 2008

Mahmoud Shakeri, "An analysis of failure in thin coatings subjected to contact loading ", , March 2008

Arash Behroozi, Mahmoud Shakeri, Bijan Mollaei Dariani, "Inverse analysis of springback in sheet metal forming by finite element method ", 2008 Theory, Computation, and Emerging Applications, March 2008

Arash Behroozi, Mahmoud Shakeri, Bijan Mollaei Dariani, "Inverse analysis of springback by finite element method ", , December 2007

Abdol Hossein Jalali Aghchai, [en-name N/A], Mahmoud Shakeri, Bijan Mollaei Dariani, "Experimental study on formability of two layer metallic sheets ", , December 2007

Mahmoud Shakeri, Reza Mirzaeifar, "Free vibration analysis of FGM plates using layerwise finite element model ", , December 2007

Seyed.Ali Sadough Vanini, Mahmoud Shakeri, "Surface investigation and stress analysis of coated systems under contact loading using FEM modeling ", , September 2007

Mahmoud Shakeri, Mohammad Reza Saviz, Mohmadhosain Yass, "Analysis of laminated cylindrical shell with piezoelectric layer using layerwise element method ", , September 2007

Mahmoud Shakeri, Reza Mirzaeifar, "Optimizing the collapsing behaviour of tubes using neural networks and genetic algorithm ", , September 2007

Mohmadhosain Yass, Mahmoud Shakeri, Reza Khaksar, "Stacking sequence optimization for a laminated cylindrical shell using the simplex algorithm ", , September 2007

Seyed Mahmoud Hosseini, Mehdi Akhlaghi, Mahmoud Shakeri, "Copled thermoelasticity of functionally graded thick hollow cylinders without energy dissipation ", , July 2007

Seyed Mahmoud Hosseini, Mehdi Akhlaghi, Mahmoud Shakeri, "Second sound and coupled thermo- mechanical behaviours of functionaly graded thick hollow cylinders ", , June 2007

Mohammad Javad Mahmoodi, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, Amir Dejestan, "Micromechanical based analysis of porous materials using simplified unit cell model ", , May 2007

Seyed Mahmoud Hosseini, Mehdi Akhlaghi, Mahmoud Shakeri, "Analytical solution transient thermoelasticity of functionally graded thick holow cylinders (pseudo- dynamic analysis) ", , January 2007

Mahmoud Shakeri, Reza Mirzaeifar, Akbar Alibeiklou, "Plastic buckling modes contribution to the modification of collapsing behaviour of circular tubes under axial impact load ", , December 2006

Mohammad Hosein Yas, Mahmoud Shakeri, Mohammad Reza Saviz, "Elasticity solution of laminated cylindrical shell with peiezoelectric layer under local ring load ", , November 2006

[en-name N/A], Mohmadhosain Yass, Mahmoud Shakeri, "Nutural frequency optimization of laminated cylindrical shell subjected to tsai- hill failure criteria constrain using penalty method ", , November 2006

Mohammad Mohammadi Aghdam, Mahmoud Shakeri, Akbar Alibeiklou, Ehsan Ameri, "Stacking sequence optimization for laminated cylindrical panels using the globalized nelder- mead method ", , September 2006

Mohammad Hosein Yas, Mahmoud Shakeri, Mehdi Ghasemi Gol, "Two objective stacking sequence optimization of a cylinderical shell using genetic algorithm ", , April 2006

Mahmoud Shakeri, Ehsan Ameri, Mohammad Mohammadi Aghdam, "Stacking sequence optimization of laminated cylindrical panels using Globalized Nelder-Mead method ", CST 2006, April 2006

Mahmoud Shakeri, "Static analysis of laminated anisotropic cylinderical panel under patch moment ", , January 2006

Mahmoud Shakeri, Abolfazl Khosravirad, Akbar Alibeiklou, "Stacking sequence optimization of laminated cylinderical panel for maximum natural frequency with strength constraints using genetic algorithm with penalty method ", , January 2006

Mahmoud Shakeri, "Elasticity solution of laminated cylindrical shell with piezoelectric actuator and sensor layers ", , January 2006

Mahmoud Shakeri, "Stacking sequence optimizaion of laminated cylindrical panels using genetic algorithm and neural networks ", , January 2006

Seyed.Ali Sadough Vanini, Alireza Alikhani, Mahmoud Shakeri, Ali Reza Danesh Mehr, "Active Reduction of vibration of the shell panel composites embedded with Piezoelectric Actuators ", , October 2005

Seyed.Ali Sadough Vanini, Mahmoud Shakeri, Samrand Rash Ahmadi, "Development of a model to predict the stresses in thin coatings induced by a scratch indenter for two elastic layers system ", , October 2005

Mahmoud Shakeri, Akbar Alibeiklou, Ali Akbar Morovvat, "Multi- objective optimization of laminated cylindrical panels using a genetic algorithm ", , August 2005

Ali Reza Danesh Mehr, Mahmoud Shakeri, "The dynamic behaviour of a piezoelectirc sensor and actuator embedded in a composit cylinder ", , August 2005

Mahmoud Shakeri, Ali Reza Danesh Mehr, "three dimensional dynamic solution of laminated shell panel with piezoelectric senor layer based on the theory of elastisity ", , August 2005

Ali Reza Danesh Mehr, Mahmoud Shakeri, "Study of finite laminated shell panel with two piezoelectric layers under dynamic loading based on elasticity ", , July 2005

Mahmoud Shakeri, Mehdi Akhlaghi, Seyed Mahmoud Hosseini, "Dynamic Response of Functionally Graded Thick Hollow Cylinder Under Dynamic Loading ", Fifteenth International Conference On Composite Materials, June 2005

Mahmoud Shakeri, Mehdi Akhlaghi, "dynamic ehavior of functionally graded thick hollow cylinder ", , March 2005

Mahmoud Shakeri, Seyed Mahmoud Hosseini, "dynamics response of functionally graded thick hollow cylinder under dynamic loading ", , March 2005

Mahmoud Shakeri, "multi - objective optimization of laminated cylindrials panels using a genetic algorithm ", , March 2005

Mahmoud Shakeri, Ali Reza Danesh Mehr, "three - dimensional dynamic solution of laminated shell paunel with piezoelective sensor layer based on the theory of blasticity ", , March 2005

Akbar Alibeiklou, Mahmoud Shakeri, "Dynamic analysis of laminated cross- plypanel under localized moment ", , February 2005

Mahmoud Shakeri, Mehdi Akhlaghi, Seyed Mahmoud Hosseini, "Dynamics response of FGM thick hollow cylindv ", , January 2005

Mahmoud Shakeri, Mohammad Reza Saviz, Mohammad Hosein Yas, "Elacticity soution for laminated cylindrical shell with piezuelectric layer ", , December 2004

Mahmoud Shakeri, Mohammad Reza Eslami, Ali Reza Danesh Mehr, "Elasticity Solution of Thick Laminated Shell panel with piezoelectric Layer under Dynamic Loading ", , September 2004

Mahmoud Shakeri, Akbar Alibeiklou, "Numerical Analysis of the Axisymmetric Collapse of Cylindrical Tubes under Axial Loading ", the Seventh International Conference on Computational Structures Technology, September 2004

Mahmoud Shakeri, Mohammad Reza Eslami, Ali Reza Danesh Mehr, "Elasticity solution of thick laminated cylindrical panel with piezoelectric layer under dynamic loading ", , September 2004

Ali Reza Danesh Mehr, Mahmoud Shakeri, Akbar Alibeiklou, "Analysis of thick laminated panel with piezoelectric sensors based on three- diminsional theory of elasticity ", , August 2004

Ali Reza Danesh Mehr, Mahmoud Shakeri, "The Response Analysis of the Piezoelectric Shell Panel Actuators Based on the Theory of Elasticity ", The Response Analysis of the Piezoelectric Shell Panel Actuators Based on the Theory of Elasticity, July 2004

Mahmoud Shakeri, Mohammad Reza Eslami, Akbar Alibeiklou, "Dynamic analysis of multilayered anisotropic cylindrical panels under thermal load ", , June 2003

Mahmoud Shakeri, Shahriar Fariborz, Akbar Alibeiklou, Akbar Tizfahm Gavae Bonab, "Elastic bucking of reinforced shells with holes ", , January 2003

Mahmoud Shakeri, Ali Reza Danesh Mehr, Akbar Alibeiklou, "Elasticity solution of thick laminated cylindrical panel with piezoelectric tayer under static loading. ", , January 2003

Mahmoud Shakeri, Mohammad Hosein Yas, Mehdi Ghasemi Gol, "Optimal stacking segwence of laminated cylindrical shell using genetic algorithm ", , January 2003

Mahmoud Shakeri, Akbar Alibeiklou, Ali Goodarzi, "Optimal stacking sepuence of laminated cylindrical panel using genetic algorithm . ", , January 2003

Mahmoud Shakeri, Mohammad Hosein Yas, "Vibration of reinforced shells ", , January 2003

Mahmoud Shakeri, Akbar Alibeiklou, Ali Goodarzi, "Oprimal stacking sequence of lami bated cylindrical panel using genetic algorithm ", , January 2003

Mahmoud Shakeri, Hamidreza Daghyani, Akbar Alibeiklou, Shahrokh Mirzaee Nahavandy, "Axial collapse of cylindrical shells under quasi _ static load ", , January 2003

Mahmoud Shakeri, Mohammad Reza Eslami, Akbar Alibeiklou, "Dynamic analysis of multilayered anisotropic shallow cylindrical panel under thermal load ", , December 2001

Mahmoud Shakeri, Mohammad Reza Eslami, Akbar Alibeiklou, "Elasticity solution for thick laminated circular cylindrical shallow and non-shallow panels under dynamic load ", , June 2001

Mahmoud Shakeri, Mohammad Reza Eslami, Akbar Alibeiklou, "Erasticity for taica lominated circyl shallow and non-shallow panels under dy-load ", , June 2001

Mahmoud Shakeri, Bijan Mollaei Dariani, Seyed.Ali Sadough Vanini, "Formaing Limit Diagram of metal sheet in actual strain respect to forming process . ", , March 2001

Mahmoud Shakeri, Bijan Mollaei Dariani, Seyed.Ali Sadough Vanini, "Forming Limit Diagram Of Metal Computational Method ", , March 2001

Mahmoud Shakeri, Bijan Mollaei Dariani, Seyed.Ali Sadough Vanini, "Forming limit diagram of metal sheet In actual strain path with respect to forming process ", , January 2001

Mahmoud Shakeri, Mohammad Reza Eslami, Akbar Alibeiklou, "Elasticity solution for thick laminated shallow circular cylindrical panels under dynamic path load ", , August 2000

Mahmoud Shakeri, Mohammad Reza Eslami, Mohammad Hosein Yas, Akbar Alibeiklou, Mohammad Barzegari, "A galerkin finite element dynamic analysis of multilayer composite cylindrical shells ", , June 2000

100

Mahmoud Shakeri, Mohammad Reza Eslami, Akbar Alibeiklou, "Dynamic analysis of multi - layered anisotropic shallow cylindrical panels ", , June 2000

101

Mahmoud Shakeri, Mohammad Reza Eslami, Akbar Alibeiklou, "Dynamic analysis of multilayer anisotropic shallow cylindrical panels ", , June 2000

102

Mahmoud Shakeri, Seyed.Ali Sadough Vanini, Bijan Mollaei Dariani, "Influence of Grain Size and Sheet Thickess on the Low Carbon Steel Sheet Formability Limits ", , October 1999

103

Mahmoud Shakeri, Mohammad Reza Eslami, Akbar Alibeiklou, "Elasticity solution for thick laminated circular cylindrical panels under dynamic patch load ", , August 1999

104

Mahmoud Shakeri, Akbar Alibeiklou, "Dynamic analysis of multi-layered shallow cylindrical panels ", , August 1999

105

Bijan Mollaei Dariani, Mahmoud Shakeri, Seyed.Ali Sadough Vanini, "Theoretical study of sheet metal formability (second part) ", , February 1999

106

Bijan Mollaei Dariani, Mahmoud Shakeri, Seyed.Ali Sadough Vanini, "Experimental study of sheet metal formability (first part) ", , February 1999

107

Seyed.Ali Sadough Vanini, Mahmoud Shakeri, Bijan Mollaei Dariani, "Effect of grain size and prestraining on the sheet metal formalaility limits ", , October 1998

108

Mahmoud Shakeri, "Elasticity solutions for laminated anisotropic cylidrical panel under impulse ", , October 1998

109

Manouchehr Salehi, Mahmoud Shakeri, [en-name N/A], "Small defletion analysis of fiber- rein forced laminated sector mindlin plates ", , September 1998

110

Seyed.Ali Sadough Vanini, Mahmoud Shakeri, Bijan Mollaei Dariani, "Analysis Experimental ET theorique De formage des toles metalliques . ", , September 1998

111

Mahmoud Shakeri, Seyed.Ali Sadough Vanini, Bijan Mollaei Dariani, "Theoretical and experimental sensitivity analysis of sheet metal formability Limits . ", , September 1998

112

Mahmoud Shakeri, Ali Khorsandi, "small deflection analysis of fiber reinforced laminated sector mindlin plates ", , August 1998

113

Seyed.Ali Sadough Vanini, Mahmoud Shakeri, Bijan Mollaei Dariani, "Effect of prestraining on forming limit diagrams of low carbon steel ", , July 1998

114

Mahmoud Shakeri, Mohammad Reza Eslami, Akbar Alibeiklou, "dynamic analysis of thick laminated anisotropic cylindrical panel ", , June 1998

115

Seyed.Ali Sadough Vanini, Mahmoud Shakeri, Bijan Mollaei Dariani, "Influence of grain refining annealing on the low carbon steel formability limits ", , March 1998

116

Mahmoud Shakeri, "Three dimensional vibration of anisotropic laminated cylindrical panel ", , March 1998

117

Mahmoud Shakeri, "Influence of grain size on the low carbon steel sheet formability limits ", , March 1998

118

Mahmoud Shakeri, [en-name N/A], "Transverse Shear Deformability of Fiber Reinforced Laminated Sector Plates ", , January 1998

119

Mohammad Reza Eslami, Mahmoud Shakeri, Behrouz Shiari, "Coupled thermoelasticity of composite sphoried shells ", , August 1997

120

Bijan Mollaei Dariani, Mahmoud Shakeri, Seyed.Ali Sadough Vanini, "Technique for determining forming limit diagram in sheet metals formability ", , May 1996

121

Mohammad Reza Eslami, Mahmoud Shakeri, Abdolreza Ohadi Hamadani, "Coupled Thermoelasticity of Shells ", , June 1995

122

Mahmoud Shakeri, Mohammad Hosein Yas, "Three dimensional axisymme tric vibration of ortho tropic and cross ply laminated hemispherical shell ", , January 1995

123

Mohammad Reza Eslami, Mahmoud Shakeri, Abdolreza Ohadi Hamadani, "Galerkin Finite Element Analysis of Shells of Revolution Under Blast LOADS ", , July 1994

124

Mahmoud Shakeri, Mohammad Reza Eslami, Abdolreza Ohadi Hamadani, "Consideration of Normal Stress in Shell Equations Under Shock Loads ", , July 1994

125

Mohammad Reza Eslami, Mahmoud Shakeri, Behrooz Shiary, "coupled thermoelasticity of composite laminated cylindrical shells ", Engineering Systems Design and Analysis ASME-ESDA96, August 1993

126

Mahmoud Shakeri, Mohammad Reza Eslami, Abdolreza Ohadi Hamadani, "Cylindrical Shell Under Impact Load including Transverse Shear and Normal Stress ", , January 1993

127

Mahmoud Shakeri, Mohammad Reza Eslami, Abdolreza Ohadi Hamadani, "Analysis of Cylindrical Shells Under Dynamics Loading, Including the Shear Effect ", , January 1993

128

Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Bending of Orthotroic plates with shear deformation ", , March 1992