محمد محمدی اقدم - دانشگاه صنعتی امیرکبیر

Mechanical behavior of functionally graded porous materials with nano additives under static pressure and compression loadings using experimental and numerical methods

محمدحسین کاظم عباس الجابری

مهر 1403

پایش آسیب خستگی در میله های فولادی با استفاده از مبدلهای پیزوالکتریک و ویژگی های امواج لمب

حمید صالحی و مهناز عبدا...شمشیرساز

مهر 1401

ارائه مدل ساختاری برای پیش بینی رفتار ساقه مغز در اثر آسیب های مکانیکی

فائزه اسکندری و مهدی شفیعیان

اسفند 1399

تحلیل رفتار صفحات کامپوزیت حاوی الیاف خمیده تحت بار متحرک با استفاده از تئوری الاستیسیته سه بعدی و منحنی های نربز

یاسین حیدرپور

آذر 1395

بررسی چند مقیاسی رفتار فوم های فلزی سلول باز تحت بارگذاری های ایستایی و خستگی پرچرخه

رضا هدایتی و مجتبی صدیقی

تیر 1395

رفتار کمانش و پس کمانش نانو پوسته های استوانه ای با در نظر گرفتن اثر تنش سطحی تحت بار محوری به همراه شبیه سازی دینامیک مولکولی

سعید سهمانی و محسن بهرامی

اسفند 1394

تحلیل رفتار ترمومکانیکی مواد و سازه های تقویت شده با الیاف حافظه دار با استاده از مدل میکرومکانیک

علیرضا دامن پاک مقدم

اردیبهشت 1394

تحلیل استاتیکی و دینامیکی ورق مستطیل با نوارهایی از آلیاژ حافظه دار

مهدی بداغی و محمود شاکری

اردیبهشت 1394

توسعه روش دیفرانسیل کوادریچر المانی (DQEM ) به تحلیل مایکرومکانیک مواد مرکب تحت بارهای ترمومکانیکی

محمد بیات

خرداد 1391

بررسی مایکرومکانیک شروع وگسترش خرابی موادمرکب زمینه فلزی تحت بار ترمومکانیکی با استفاده از روش بدون المان

عیسی احمدی

دی 1389

تحلیل مکانیزمهای خرابی در مواد مرکب پایه فلزی با استفاده از تعمیم روش سلول واحد

محمدجواد محمودی

دی 1388

پایان‌نامه‌های کارشناسی ارشد

عنوان پایان‌نامه

توسط

تاریخ دفاع

بررسی ریزساختاری رفتارمکانیکی مغز در برابر بارگذاری ضربه

هانیه بادی پا و مجتبی صدیقی

شهریور 1404

کاربرد روش بزیر در تحلیل رفتارهای استاتیکی و ارتعاشات درون صفحه ای ورق های مستطیلی دارای ترک بر اساس نظریه پری داینامیک

فرزین گل احضار ثابت

شهریور 1404

تحلیل غیرخطی خمش صفحه ی متخلخل با ساختار مواد طبقه بندی شده روی پایه الاستیک با استفاده از روش عددی شبکه های عصبی فیزیک آگاه

ارین صفاخواه

شهریور 1404

شبکه عصبی فیزیک آگاه برای تحلیل ارتعاشات آزاد پنل های استوانه ای ارتوتروپیک

سما بیات

مرداد 1404

تحلیل خمش وابسته به زمان ورق های مستطیلی ویسکوالاستیک با مشتق کسری

طاها اصفهانی

تیر 1404

تحلیل خمش غیر خطی نانو تیرها با استفاده از شبکه های عصبی فیزیک آگاه

صبا سادات میرصادقی اصفهانی

اسفند 1403

حل عددی مساله پوسته دو انحنائی ساندویچی با هسته آگزتیک با استفاده از اپراتور دیفرانسیل پری دینامیک

شایان الیاسی

مهر 1403

تحلیل میدان دمایی حاصل از فرآیند جوشکاری قوسی با گاز محافظ با استفاده از روش های یادگیری ماشین

محمدرضا غلامی

شهریور 1403

بررسی مقایسه ای رفتار مکانیکی ساختار های پنتامود مانند تحت بار استاتیکی

تینا نوری تبار و مجتبی صدیقی

شهریور 1403

شبیه سازی دینامیکی ربات های موبایل چرخ دار: یک مطالعه مقایسه ای روش های عددی چند مرحله ای

علیرضا ابراهیمی و علی عظیمی

مرداد 1403

تحلیل ضربات تگرگ روی چندلایه های کامپوزیتی و ساندویچی

محمد حقگو و مجتبی صدیقی

اردیبهشت 1403

آنالیز ساختار فرامواد انعطاف پذیر تحت تاثیر نیروی هارمونیک

نوید ربیعی دستجردی

اسفند 1402

تحلیل خمش ورق های متوازی الاضلاع کامپوزیتی مشبک با استفاده از روش کانتروویچ توسعه یافته

محمد حقیقی

مهر 1402

تحلیل ارتعاشات برهم کنش پوسته مخروطی سه لایه با هسته آگزتیک با جریان سیال تراکم ناپذیر

نادیا چنارانی

شهریور 1402

تحلیل خواص ویسکوالاستیک زیست مواد با استفاده از سلول های واحد الهام گرفته از مواد زیستی

محمد شکرنیا و مجتبی صدیقی

مرداد 1402

مطالعه رفتار سازه های متخلخل آگزتیک تحت بارهای ترمومکانیکی

عرفان عیوض حصاری

اردیبهشت 1402

روش های شبیه سازی مشترک: بهبود ثبات عددی و رفتار همگرایی

رضا نوپورهولاری

اسفند 1401

توسعه یک روش مبتنی بر سرد کردن در حین جوشکاری جهت کاهش تنش پسماند در آلومینیوم 6061T6

حامد همت پور و ایرج ستاری فر

اسفند 1401

تحلیل رفتار ترمو الاستیک سازه های متخلخل و سلولی تحت بارگذاری حرارتی-مکانیکی

فاطمه عابدینی

مهر 1401

تحلیل رفتار خمشی صفحات کامپوزیت لایه ای با الیاف خمیده حاوی سوراخ تحت بارگذاری استاتیکی

رسول محمدی

شهریور 1401

مدلسازی رفتار ترمومکانیکی کامپوزیت ذره ای از جنس آلیاژ حافظه دار در زمینه فلزی با استفاده از روشهای میکرومکانیکی تحت بارگذاری استاتیکی

سیدنوید منصوری و مجتبی صدیقی

خرداد 1401

بررسی رفتار ترمومکانیکی مواد متخلخل منظم تحت بارگذاری چند محوره

علی کوچکی

مهر 1400

تحلیل تجربی و عددی داربست های نانوکامپوزیتی مغناطیسی زیست سازگار

علی خالوندی

شهریور 1400

شبیه سازی دینامیک مولکولی و ساخت نانوکامپوزیت مغناطیسی آلژینات-پلی پیرول-هیدروکسی آپاتیت با کاربرد جایگزین استخوان

هادی کبیر و سعید صابرسمندری

شهریور 1400

بررسی رفتار ویسکوالاستیک زیست مواد متخلخل

سیدمحسن حسینی

فروردین 1400

تعیین حد تسلیم ماده متخلخل با استفاده از یک روش ماکرو-میکرو مکانیکی

غزل السادات شریعت پناهی و مجتبی صدیقی

آذر 1399

ساخت، مشخصه یابی و شبیه سازی بیوکامپوزیت پلی متیل متااکریلات - هیدروکسی آپاتیت تقویت شده با نانوذرات گرافن جهت کاربرد در مهندسی پزشکی

عارف بابکی

شهریور 1399

تحلیل رفتار افزودنی الاستین بر خواص بیومکانیکی نانوکامپوزیت هیدروکسی آپاتیت/ پلی متیل متااکریلات در مهندسی بافت استخوان تحت ضربه سرعت پایین

متین محمدزاده راد و مجتبی صدیقی

شهریور 1399

تشخیص سرطان پروستات با استفاده از تصاویر التراسونیک به روش بازسازی غیرمستقیم

سیدشهاب الدین اسحاقی نیا و افشین تقوائی پور

بهمن 1398

اثر افزودن نانوذرات مغناطیسی بر خواص مکانیکی کامپوزیت هیدروکسی آپاتیت/پلی متیل متااکریلات مورد استفاده در بافت استخوان

فریدالدین موذنی

بهمن 1398

مطالعه تئوری و تجربی خواص مکانیکی کامپوزیت های پلیمری تقویت شده با نانوورق های گرافن

محسن معینی

بهمن 1397

تحلیل تجربی و عددی رفتار خمشی ورق کامپوزیتی با تقویت کننده نانو لوله های کربنی دو جداره

محمودرضا دهنوی

بهمن 1397

تحلیل وابسته به اندازه ارتعاشات اجباری نانولوله های کربنی انتقال دهنده سیال

محمد معبودی

بهمن 1397

بررسی ناپایداری پوسته مخروطی FG-CNTRC ناشی از کنش و واکنش جامد و سیال

نرگس محمدی

مهر 1397

مدلسازی میکرومکانیکی متامتریال با ساختار میورا اوری

حسین سلیمانی

تیر 1397

مدلسازی ریزمقیاسی رفتار مکانیکی استخوان با بهره گیری از تصاویر سی تی اسکن

نعیم قویدل نیا و مجتبی صدیقی

بهمن 1396

بررسی تحلیلی و تجربی خواص مکانیکی فوم های سلول باز تحت بارگذاری استاتیکی

ابوالفضل صالحی و مجتبی صدیقی

دی 1396

ارتعاشات آزاد غیر خطی نانو پوسته های استوانه ای شکل

علی سرافراز

مهر 1396

تحلیل رفتار مکانیکی مواد چند جنسی با استفاده از روش المان محدود توسعه یافته

سیدمحمدجواد میرباقری

بهمن 1395

بررسی میکرو مکانیکی اثر لایه واسط با خواص تابعی در رفتار مکانیکی کامپوزیتهای الیافی

محسن یارمحمدی و منوچهر صالحی

دی 1394

مدل سازی و تحلیل تنش ورق فولادی وکامپوزیتی تحت بارهای ناشی از موج شوک زیرآب

حامد جعفری

مهر 1394

بررسی عددی و تجربی رفتار مکانیکی فوم فلزی سلول بسته تحت بارگذاری ضربه

مهرداد کلوشانی و مجتبی صدیقی

مهر 1394

تحلیل اعوجاج هندسی در پانلهای چندلایه فلز-الیاف در فرایند پخت

محمد هدایتی نژاد و مجتبی صدیقی

شهریور 1394

تحلیل تئوری و تجربی قانون نفوذ سنبه کروی در ورق های ساندویچی با هسته نرم

حسین روان بخش حبیب آبادی و مجتبی صدیقی

بهمن 1393

بررسی ارتعاشات نانو تیر ساخته شده از مواد هدفمند

حامد نیکنام جهرمی

مهر 1393

مدل سازی مایکرومکانیکی خرابی لایه میانی الیاف و زمینه درمواد مرکب فلزی تحت بارگذاری خارج از محور

سیدمحمدامین حسینی

مهر 1393

بررسی میکرومکانیکی ماده مرکب فلزی تک جهته در دما های بالا

حمید توفیقی اصل

بهمن 1392

آنالیز میکرومکانیکی مواد مرکب خود ترمیم شونده

سیده زهرا ایمن

آبان 1392

مدل سازی میکرومکانیکی رفتار مواد مرکب حاوی فایبرهای پیزوالکتریک

مهدی عین بیگی

آبان 1392

تحلیل کمانش پانل استوانه ای با لایه های پیزو

ارین صارمی مقدم

آبان 1392

تحلیل پایداری ورقهای کامپوزیتی متقارن ومتعامد با جدایی لایه ای در عرض

محمدمصطفی باروتی

مهر 1392

تحلیل کمانش پانل های استوانه ای به روش کانترویچ توسعه یافته ( EKM )

بهروز نظری

شهریور 1392

تحلیل خمشی قطاع دایروی شکل ضخیم ساخته شده از مواد هدفمند تحت بار موضعی با استفاده از روش کانترویچ توسعه یافته.

محمدحسن سبحانی

آبان 1391

مدلسازی و تحلیل ارتعاشات ورق کامپوزیتی ویسکوالاستیک با استفاده از اطلاعات تستهای زمانمند

حسام الدین زمانی و مهدی سعید کیاست

آبان 1391

مدلسازی المان محدود پدیده بیرون کشیدن الیاف در مواد مرکب تک جهته

الیاس عبداللهی

مهر 1391

ارائه ی مدل مایکرومکانیک سه بعدی برای شروع و گسترش خرابی لایه ی میانی در مواد مرکب ذره ای پایه فلزی

میلاد شهباز

بهمن 1390

بررسی مایکرومکانیکی خرابی لایه مشترک زمینه و رشته در مواد مرکب تک جهته با خواص ویسکوالاستیک

سیدرضا مرسلی

بهمن 1390

حل معادلات پوسته های عمومی کامپوزیت توسط روش کانترویچ توسعه یافته

کسری بیگدلی

آذر 1388

تحلیل خمشی پوسته های باز مخروطی (FG) با استفاده از روش توسعه یافته کانترویچ

نسترن شاه منصوری

آذر 1388

تحلیل پانل های استوانه ای ازمواد هدفمند تحت بار استاتیکی خمشی به روش GDQ

ستار مالکی

شهریور 1387

تحلیل غیر خطی استاتیکی ورق قطاعی ضخیم به روش GDQ

عطیه اندخشیده

شهریور 1387

تحلیل تجربی و المان محدود پوسته مخروطی جدار نازک کامپوزیتی تحت اثر بارگذاری ترکیبی محوری و خمشی

سجاد شقاقی و مجتبی صدیقی

شهریور 1387

تحلیل تنش ترمومکانیکی و تخمین عمر سرسیلندر موتور دیزل سنگین

حمیدرضا چمنی

اردیبهشت 1387

طراحی و بهینه سازی شبکه مبدلهای حرارتی بااستفاده از الگوریتم ژنتیک

محمد فسنقری و ابراهیم دامنگیر

اردیبهشت 1386

تحلیل استاتیکی ورق ضخیم باشکل نامنظم، بارگذاری موضعی و شرایط مرزی ترکیبی توسط روش GDQEM

سعید فاضلی

آذر 1385

مدل المان محدود شرع خرابی در لایه میانی فایبروماتریس در مواد مرکب فلزی تحت بارگذاری مرکب

میثم گرجی بندپی

آذر 1385

کاربرد روش کانترویچ توسعه یافته (EKM) در تحلیل خمش پانلهای استوانه ای

فربد علیجانی

آبان 1385

استفاده از روش کانترویچ توسعه یافته (EKM) در حل خمش ورق های قطاعی

مسعود محمدی

آبان 1385

تحلیل خمشی پانلهای مخروطی ارتوتروپیک بااستفاده از روش GDQ

مهدی دشتی خویدکی

اسفند 1384

چیدمان مناسب لایه های پانل چندلایه برمبنای ارتعاشات آزاد بااستفاده از روش سیمپلکس

احسان عامری و محمود شاکری

بهمن 1384

تحلیل تئوری - تجربی لوله های فلزی تحت بار محوری

جلیل پورمحمدی وفا و محمود شاکری

بهمن 1384

مدل تحلیلی آرایش اتفاقی فایبرهادر مواد مرکب تک جهته باروش SUM

امیر دژستان

اسفند 1383

استفاده از روشهای بدون المان در تحلیل خمش ورقهای ارتوتروپیک

سیدمحمدرضا علوی طباطبایی

بهمن 1383

کتب

عنوان

نگارندگان/مترجمان

کشور ناشر

تاریخ انتشار

نسخه

Nonlinear Approaches in Engineering Application, Chapter 3: Nonlinear Analysis of Flexible Parallel Mechanisms Through Bzier-Based Integration

نوپورهولاری رضا ، محمدی اقدم محمد ، تقوائی پور افشین

سوئیس

Nonlinear Approaches in Engineering Application, Chapter 5: Physics-Informed Neural Network for Solution of Nonlinear Differential Equations

علی فلاح ، محمدی اقدم محمد

سوئیس

Nonlinear Approaches in Engineering Application, Chapter 10: A Hybrid Numerical Study of the Nonlinear Instability of Nano-switches

بامری محمد ، میرزائی وفا ، مرادویسی پیمان ، محمدی اقدم محمد

سوئیس

Nonlinear Approaches in Engineering Applications, Ch 2: Novel Predictor-Corrector Formulations for Solving Nonlinear Initial Value Problems

وحید احمدی کلخورانی ، محمدی اقدم محمد

آلمان

Residual stresses in metal matrix composites

مرسلی سیدرضا ، محمدی اقدم محمد

بریتانیا

Nanomaterials for Advanced Biological Applications Size-Dependent Nonlinear Mechanics of Biological Nanoporous Microbeams

سهمانی سعید ، محمدی اقدم محمد

آلمان

Nonlinear Approaches in Engineering Applications, Ch 5: Nonlinear Size-Dependent Instability of Hybrid FGM Nanoshells

سهمانی سعید ، محمدی اقدم محمد

آمریکا

Nonlinear Approaches in Engineering Applications, Ch 11: A Semi-analytical Solution for Bending of Nonlinear Magnetostrictive Beams

شیخ الاسلامی سیدعبدالله ، محمدی اقدم محمد

آمریکا

Nonlinear Approaches in Engineering Applications, Ch 8: Analytical Solutions for Generalized Duffing Equation

محمدی اقدم محمد ، علی فلاح

آلمان

Nonlinear Approaches in Engineering Applications, Ch 7: Nonlinear Forced Vibration of Nanobeams

محمدی اقدم محمد ، نیکنام جهرمی حامد

آلمان

Nonlinear approaches in Engineering Applications; Ch5: Nonlinear initial value ordinary differential equations

محمدی اقدم محمد ، علی فلاح ، حقی پوریا

آمریکا

Residual stresses in composite materials, CH 9: Understanding residual stresses in metal matrix composites

محمدی اقدم محمد ، مرسلی سیدرضا

بریتانیا

سازه های مکانیکی تیر -ورق و پوسته

شاکری محمود ، علی بیکلو اکبر ، محمدی اقدم محمد

ایران

مقالات مجلات

Nopour R. ، MOHAMMADI AGHDAM MOHAMMAD ، Kalhori H. ، Li B., "Nonlinear free and forced vibration of cylindrical sandwich shells with lattice cores using modified Donnell's theory and Bezier integration method", Composite Structures, vol. 391, no. , pp.1-13, 2026.

Sabetghadam-Isfahani Armin ، Javanbakht Mahdi ، Silani Mohammad ، MOHAMMADI AGHDAM MOHAMMAD, "Phase-Field Analysis of Edge Dislocation Dynamics in ?5 Ni Bicrystals Under Different Thermal and Shear Loads", Acta Mechanica Solida Sinica, vol. , no. 100, pp.1-12, 2026.

SHIRMOHAMADI SHERVIN ، MOSTAJERAN GORTANI MOHAMMAD SADEGH ، Fallah Ali ، MOHAMMADI AGHDAM MOHAMMAD, "Physics-informed neural networks for micromechanics in tensile and shear loading with hyperparameter optimization", International Journal of Solids and Structures, vol. 338, no. , pp.1-15, 2026.

MOHAMMADZADEH MATIN ، BABAKI AREF ، MOHAMMADI AGHDAM MOHAMMAD ، SABER SAMANDARI SAEED ، SADIGHI MOJTABA, "A study on mechanical performance and bioactivity of PMMA-HA-graphene bone cements", Materials Today Communications, vol. 53, no. , pp.1-9, 2026.

SabetghadamIsfahani Armin ، SILANI MOHAMMAD ، Javanbakht Mahdi ، MOHAMMADI AGHDAM MOHAMMAD, "Molecular Dynamics Analysis of Temperature and Shear Stress Effects on Nickel Bi-crystal Amorphization", Iranian Journal of Chemistry and Chemical Engineering-International English Edition, vol. 45, no. 3, pp.509-522, 2026.

EBRAHIMI ALIREZA ، Azimi Ali ، MOHAMMADI AGHDAM MOHAMMAD, "Impact of numerical integrators on the stabilization of holonomic and nonholonomic constraints in the Baumgarte method", Engineering With Computers, vol. 42, no. , pp.1-23, 2026.

FATTAHI ALI ، MOHAMMADI AGHDAM MOHAMMAD ، ALIZADEH VAGHASLOO YOUNES, "High-fidelity hybrid NURBS-Galerkin framework for nonlinear coupled phase-field elasticity: formulation and implementation", Engineering With Computers, vol. 41, no. , pp.5019-5037, 2025.

MIRSADEGHI ESFAHANI SABA SADAT ، Ali Fallah ، MOHAMMADI AGHDAM MOHAMMAD, "Physics-Informed Neural Network for Nonlinear Bending Analysis of Nano-Beams: A Systematic Hyperparameter Optimization", Mathematical and Computational Applications, vol. 30, no. 4, pp.1-21, 2025.

MIRZAEI VAFA ، BAMERI MOHAMMAD ، MORADWEYSI PEYMAN ، MOHAMMADI AGHDAM MOHAMMAD, "A Robust Hybrid Solution for Pull-in Instability of FG Nano Electro-Mechanical Switches Based on surface Elasticity Theory", Cmes-Computer Modeling In Engineering and Sciences, vol. 143, no. 3, pp.2811-2832, 2025.

HAGHGOO MOHAMMAD ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD ،, "Repeated and multiple hail impacts on honeycomb sandwich panels: An experimental and numerical study", Composite Structures, vol. 360, no. 3, pp.1-23, 2025.

NOPOUR HOLLARI REZA ، Ali Fallah ، MOHAMMADI AGHDAM MOHAMMAD, "Large deflection analysis of functionally graded reinforced sandwich beams with auxetic core using physics-informed neural network", Mechanics Based Design of Structures and Machines, vol. 0, no. 0, pp.1-25, 2025.

MIRSADEGHI ESFAHANI SABA SADAT ، Ali Fallah ، MOHAMMADI AGHDAM MOHAMMAD, "Physics-informed neural network for bending analysis of two dimensional functionally graded nano-beams based on nonlocal strain gradient theory", Journal of Applied and Computational Mechanics, vol. 56, no. 1, pp.222-248, 2025.

، SHOKRNIA MOHAMAD ، ALAVI MELIKASADAT ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD, "Viscoelastic Behavior of Cellular Biomaterials Based on Octet-Truss and Tetrahedron Topologies", Materials, vol. 17, no. 23, pp.1-36, 2024.

MORADWEYSI PEYMAN ، GOUDARZI TAHA ، MOHAMMADI AGHDAM MOHAMMAD, "Modeling of large periodic origami structures to analyze local vibration", International Journal of Mechanical Sciences, vol. 0, no. 0, pp.1-19, 2024.

ALJABERI MOHAMMED HUSSEIN ، MOHAMMADI AGHDAM MOHAMMAD ، GOUDARZI TAHA ، Muhannad Al-Waily, "Compressive Behavior of Novel Additively Manufactured Ti-6Al-4V Lattice Structures: Experimental and Numerical Studies", ..Materials, vol. 17, no. 15, pp.1-20, 2024.

Reza Hedayati ، EYVAZ HESARI ERFAN ، MOHAMMADI AGHDAM MOHAMMAD ، SADIGHI MOJTABA, "Thermomechanical behavior of auxetic lattices", Journal of Thermal Stresses, vol. 47, no. 8, pp.1073-1094, 2024.

M.M. Mobasheri Zafarabadi ، MOHAMMADI AGHDAM MOHAMMAD ، Aurelio L. Araujo, "Buckling and free vibration of grid-stiffened composite conical panels using Extended Kantorovich Method", Thin-Walled Structures, vol. 0, no. 0, pp.1-10, 2024.

SALMANIZADEH HASSANABADI ALI ، NOPOUR HOLLARI REZA ، MOHAMMADI AGHDAM MOHAMMAD ، Yaser Kiani ، ESLAMI MOHAMMAD REZA, "On the free vibration characteristics of multiscale hybrid conical panels utilizing Chebyshev-Ritz route", Mechanics Based Design of Structures and Machines, vol. 0, no. 0, pp.1-20, 2024.

KHALVANDI ALI ، SABER SAMANDARI SAEED ، MOHAMMADI AGHDAM MOHAMMAD, "A supervised learning-assisted multi-scale study for thermal and mechanical behavior of porous silica", Heliyon, vol. 10, no. 1, pp.28995-28995, 2024.

KABIR HADI ، MOHAMMADI AGHDAM MOHAMMAD ، SABER SAMANDARI SAEED ، MOEINI MOHSEN, "A molecular dynamics study on the size effects of Fe3O4 nanoparticles on the mechanical characteristics of polypyrrole/Fe3O4 nanocomposite", Molecular Simulation, vol. 0, no. 0, pp.1-13, 2024.

MORADWEYSI PEYMAN ، P. M. Santucci ، Georgio Carta ، GOUDARZI TAHA ، MOHAMMADI AGHDAM MOHAMMAD ، A. Baldi ، M. Brun, "Design and analysis of a thick Miura-ori folded structure with large negative Poissons ratio", Mechanics of Advanced Materials and Structures, vol. 29, no. 25, pp.1-19, 2024.

ESHAGHINIA SEYED SHAHAB ، Taghvaeipour Afshin ، MOHAMMADI AGHDAM MOHAMMAD ، Hassan Rivaz, "On the soft tissue ultrasound elastography using FEM based inversion approach", Proceedings of The Institution of Mechanical Engineers Part H-Journal of Engineering In Medicine, vol. 0, no. 0, pp.1-17, 2024.

KHOSHNAZAR MOHAMMAD ، DASTRANJ MOHAMMAD ، Azimi Ali ، MOHAMMADI AGHDAM MOHAMMAD ، Paulo Flores, "Application of the Bezier integration technique with enhanced stability in forward dynamics of constrained multibody systems with Baumgarte stabilization method", Engineering With Computers, vol. 0, no. 0, pp.1-15, 2023.

NOPOUR HOLLARI REZA ، Taghvaeipour Afshin ، MOHAMMADI AGHDAM MOHAMMAD ، Francisco Gonzalez, "On the generalized Bzier-based integration approach for co-simulation applications", Mechanics Based Design of Structures and Machines, vol. 0, no. 0, , 2023.

ABEDINI FATEMEH ، Reza Hedayati ، MOHAMMADI AGHDAM MOHAMMAD ، SADIGHI MOJTABA, "Thermomechanical behavior of lattice structures: An analytical, numerical, and experimental study", Mechanics Based Design of Structures and Machines, vol. 51, no. 5, pp.1-24, 2023.

ALINIA MAYSAM ، NOPOUR HOLLARI REZA ، MOHAMMADI AGHDAM MOHAMMAD ، Reza Hedayati, "The effect of auxeticity on the vibration of conical sandwich shells with ring support under various boundary conditions", Engineering Analysis With Boundary Elements, vol. 152, no. 0, pp.130-147, 2023.

Ali Fallah ، MOHAMMADI AGHDAM MOHAMMAD, "Physics-informed neural network for bending and free vibration analysis of three-dimensional functionally graded porous beam resting on elastic foundation", Engineering With Computers, vol. 0, no. 0, pp.1-18, 2023.

ZAMANI HESAMALDIN ، Nourazar Khoshknab S.Salman ، MOHAMMADI AGHDAM MOHAMMAD, "Large-amplitude vibration and buckling analysis of foam beams on nonlinear elastic foundations", Mechanics of Time-Dependent Materials, vol. 0, no. 0, pp.1-18, 2022.

، Shafieian Mahdi ، MOHAMMADI AGHDAM MOHAMMAD ، Kaveh Laksari, "Morphological Changes in Glial Cell Arrangement under Mechanical Loading: A Quantitative Study", Injury-International Journal of The Care of The Injured, vol. 53, no. 11, pp.3617-3623, 2022.

ESKANDARI FAEZEH ، Shafieian Mahdi ، MOHAMMADI AGHDAM MOHAMMAD ، Kaveh Laksari, "Morphological changes in glial cells arrangement under mechanical loading: A quantitative study", Injury-International Journal of The Care of The Injured, vol. 53, no. 11, pp.3617-3623, 2022.

Sahmani ، SABER SAMANDARI SAEED ، MOHAMMADI AGHDAM MOHAMMAD ، Khandan, "Microstructural properties of novel nanocomposite material based on hydroxyapatite and carbon nanotubes: fabrication and nonlinear instability simulation", Journal of Nanostructure In Chemistry, vol. 12, no. 1, pp.1-22, 2022.

KHALVANDI ALI ، MOHAMMADI AGHDAM MOHAMMAD ، SABER SAMANDARI SAEED, "Fabrication, experimental study and 2-D finite element computational homogenization of bone scaffolds under uniaxial and biaxial compressive loadings??????", Proceedings of The Institution of Mechanical Engineers Part N-Journal of Nanomaterials Nanoengineering and Nanosystems, vol. 20, no. 1, pp.1-22, 2022.

KHALVANDI ALI ، SABER SAMANDARI SAEED ، MOHAMMADI AGHDAM MOHAMMAD, "Application of artificial neural networks to predict Youngs moduli of cartilage scaffolds: An in-vitro and micromechanical studyf", Biomaterials Advances, vol. 136, no. 1, pp.1-17, 2022.

Reza Hedayati ، Yahya Sheikhnejad ، MOHAMMADI AGHDAM MOHAMMAD, "Editorial to the Special Issue on Advanced Micro/Nanoscale Porous Materials for Novel Applications: Answering to Future Needs", Transport In Porous Media, vol. 142, no. 0, pp.1-4, 2022.

NOPOUR HOLLARI REZA ، Farzad Ebrahimi ، Ali Dabbagh ، MOHAMMADI AGHDAM MOHAMMAD, "Nonlinear forced vibrations of three?phase nanocomposite shells considering matrix rheological behavior and nano?fber waviness", Engineering With Computers, vol. 0, no. 0, pp.1-18, 2022.

Lazreg Hadhi ، Ali Fallah ، MOHAMMADI AGHDAM MOHAMMAD, "Influence of the distribution pattern of porosity on the free vibration of functionally graded plates", Structural Engineering and Mechanics, vol. 82, no. 2, pp.151-161, 2022.

Hossein Kabir ، MOHAMMADI AGHDAM MOHAMMAD, "A generalized 2D Bzier-based solution for stress analysis of notched epoxy resin plates reinforced with graphene nanoplatelets", Thin-Walled Structures, vol. 169, no. 0, pp.1-6, 2021.

SALEHI HAMID ، SHAMSHIRSAZ MAHNAZ ، MOHAMMADI AGHDAM MOHAMMAD, "Investigation on modulation of multi-frequency ultrasonic waves in structures with quadratic nonlinearity", Smart Structures and Systems, vol. 28, no. 1, pp.43-53, 2021.

MOBASHERI ZAFARABADI MOHAMMAD MEHDI ، MOHAMMADI AGHDAM MOHAMMAD, "Semi-analytical solutions for buckling and free vibration of composite anisogrid lattice cylindrical panels", Composite Structures, vol. 275, no. 0, pp.1-11, 2021.

SEYFI ALI ، MOHAMMADI AGHDAM MOHAMMAD, "Vibrational behavior of temperature-dependent imperfect functionally graded plate lying on an elastic substrate", Mechanics Based Design of Structures and Machines, vol. 0, no. 0, , 2021.

، Shafieian Mahdi ، MOHAMMADI AGHDAM MOHAMMAD ، Kaveh Laksari, "The Importance of Axonal Directions in the Brainstem Injury during Neurosurgical Interventions", Injury-International Journal of The Care of The Injured, vol. 52, no. 6, pp.1271-1276, 2021.

Sahmani ، Khandan ، SABER SAMANDARI SAEED ، Esmaeili ، MOHAMMADI AGHDAM MOHAMMAD, "Fabrication and resonance simulation of 3D-printed biocomposite mesoporous implants with different periodic cellular topologies", Bioprinting, vol. 22, no. 1, pp.138-138, 2021.

MOHAMMADZADEH MATIN ، SABER SAMANDARI SAEED ، SADIGHI MOJTABA ، Tayebi ، MOHAMMADI AGHDAM MOHAMMAD ،, "Macro-and micromechanical modelling of HA-Elastin scaffold fabricated using freeze drying technique", Journal of Nanoanalysis, vol. 8, no. 1, pp.1-15, 2021.

SOLEIMANI HOSSEIN ، GOUDARZI TAHA ، MOHAMMADI AGHDAM MOHAMMAD, "Advanced structural modeling of a fold in Origami/Kirigami inspired structures", Thin-Walled Structures, vol. 161, no. 0, pp.1-22, 2021.

Hooman Danesh ، Mahdi Javanbakht ، MOHAMMADI AGHDAM MOHAMMAD, "A comparative study of 1D nonlocal integral Timoshenko beam and 2D nonlocal integral elasticity theories for bending of nanoscale", Continuum Mechanics and Thermodynamics, vol. 0, no. 0, , 2021.

، Shafieian Mahdi ، MOHAMMADI AGHDAM MOHAMMAD ، Kaveh Laksari, "Mind the gap: A mechanobiological hypothesis for the role of gap junctions in the mechanical properties of injured brain tissue", Journal of The Mechanical Behavior of Biomedical Materials, vol. 115, no. 1, pp.1-4, 2020.

ESKANDARI FAEZEH ، Shafieian Mahdi ، MOHAMMADI AGHDAM MOHAMMAD ، Kaveh Laksari, "Mind the gap: A mechanobiological hypothesis for the role of gap junctions in the mechanical properties of injured brain tissue", Journal of The Mechanical Behavior of Biomedical Materials, vol. 115, no. 1, pp.1-6, 2020.

ESKANDARI FAEZEH ، Shafieian Mahdi ، MOHAMMADI AGHDAM MOHAMMAD ، Kaveh Laksari, "The Importance of Axonal Directions in the Brainstem Injury during Neurosurgical Interventions", Injury-International Journal of The Care of The Injured, vol. 51, no. 10, pp.1-10, 2020.

ESKANDARI FAEZEH ، Shafieian Mahdi ، MOHAMMADI AGHDAM MOHAMMAD ، Kaveh Laksari, "Structural Anisotropy vs. Mechanical Anisotropy: The Contribution of Axonal Fibers to the Material Properties of Brain White Matter", Annals of Biomedical Engineering, vol. 48, no. 10, pp.1-9, 2020.

، Shafieian Mahdi ، MOHAMMADI AGHDAM MOHAMMAD ، Kaveh Laksari, "Structural Anisotropy vs. Mechanical Anisotropy: The Contribution of Axonal Fibers to the Material Properties of Brain White Matter", Annals of Biomedical Engineering, vol. 49, no. 1, pp.991-999, 2020.

، Shafieian Mahdi ، MOHAMMADI AGHDAM MOHAMMAD ، Kaveh Laksari, "Tension strain-softening and compression strain-stiffening behavior of brain white matter", Annals of Biomedical Engineering, vol. 49, no. 1, pp.276-286, 2020.

ESKANDARI FAEZEH ، Shafieian Mahdi ، MOHAMMADI AGHDAM MOHAMMAD ، Kaveh Laksari, "Tension Strain-Softening and Compression Strain-Stiffening Behavior of Brain White Matter", Annals of Biomedical Engineering, vol. 48, no. 0, , 2020.

MOEINI MOHSEN ، BARBAZESFAHANI REZA ، SABER SAMANDARI SAEED ، MOHAMMADI AGHDAM MOHAMMAD, "Molecular dynamics simulations of the effect of temperature and strain rate on mechanical properties of graphene-epoxy nanocomposites", Molecular Simulation, vol. 46, no. 6, pp.476-486, 2020.

Saeed Sahmani ، ، SABER SAMANDARI SAEED ، MOHAMMADI AGHDAM MOHAMMAD, "Effect of magnetite nanoparticles on the biological and mechanical properties of hydroxyapatite porous scaffolds coated with ibuprofen drug", Materials Science and Engineering C-Materials For Biological Applications, vol. 111, no. 1, pp.110835-110835, 2020.

، Shafieian Mahdi ، MOHAMMADI AGHDAM MOHAMMAD ، Kaveh Laksari, "A knowledge map analysis of brain biomechanics: Current evidence and future directions", Clinical Biomechanics, vol. 75, no. 1, pp.1-11, 2020.

ESKANDARI FAEZEH ، Shafieian Mahdi ، MOHAMMADI AGHDAM MOHAMMAD ، Kaveh Laksari, "A knowledge map analysis of brain biomechanics: Current evidence and future directions", Clinical Biomechanics, vol. 75, no. 0, , 2020.

GHAVIDELNIA NAEIM ، Reza Hedayati ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD, "Development of porous implants with non-uniform mechanical properties distribution based on CT images", Applied Mathematical Modelling, vol. 83, no. 0, pp.801-823, 2020.

saeed nouri ، Saeid Sahmani ، M. Asayesh ، MOHAMMADI AGHDAM MOHAMMAD, "Microstructural characterization of YSZ-CoNiCrAlY two-layered thermal barrier coating formed on ?-TiAl intermetallic alloy via APS process", Intermetallics, vol. 118, no. 0, pp.1-6, 2020.

Alireza Adli ، Karim Shalesh-Nezhad ، Mohammad reza khoshravan Azar ، MOHAMMADI AGHDAM MOHAMMAD, "The effect of vascular self-healing pattern on mechanical behavior and healing performance of epoxy/glass composite", Plastics Rubber and Composites, vol. 49, no. 2, pp.79-90, 2019.

saeed nouri ، Saeid Sahmani ، M. Asayesh ، MOHAMMADI AGHDAM MOHAMMAD, "Improvement of high-temperature oxidation resistance of ?-TiAl intermetallic alloy by YSZ-NiCoCrAlY coating using APS process", Materials Research Express, vol. 6, no. 12, pp.1-8, 2019.

Samaneh Saber-Samandari ، MOHAMMADI AGHDAM MOHAMMAD ، SABER SAMANDARI SAEED, "A novel magnetic bifunctional nanocomposite scaffold for photothermal therapy and tissue engineering", International Journal of Biological Macromolecules, vol. 138, no. 1, pp.810-818, 2019.

Saeid Sahmani ، A. Khandan ، E. Esmaeili ، SABER SAMANDARI SAEED ، M.Ghadiri Nejad ، MOHAMMADI AGHDAM MOHAMMAD, "Calcium phosphate-PLA scaffolds fabricated by fusion deposition modelling technique for bone tissue applications: Fabrication, characterization and simulation", Ceramics International, vol. 46, no. 0, pp.2447-2456, 2019.

saeed nouri ، Saeid Sahmani ، M. Asayesh ، MOHAMMADI AGHDAM MOHAMMAD, "Study on the oxidation resistance of ?-TiAl intermetallic alloy coated via different diffusion coating processes", Materials Research Express, vol. 6, no. 10, pp.1-12, 2019.

MOHAMMADI NARGES ، ASADI HAMED ، MOHAMMADI AGHDAM MOHAMMAD, "An efficient solver for fully coupled solution of interaction between incompressible fluid flow and nanocomposite truncated conical shells", Computer Methods In Applied Mechanics and Engineering, vol. 351, no. 0, pp.478-500, 2019.

Saeid Sahmani ، MOHAMMADI AGHDAM MOHAMMAD, "Nonlocal electrothermomechanical instability of temperature-dependent FGM nanopanels with piezoelectric facesheets", Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, vol. 43, no. 0, pp.579-593, 2019.

Yasin Heydarpour ، MOHAMMADI AGHDAM MOHAMMAD, "A new multi-step technique based on the non-uniform rational basis spline curves for non-linear transient heat transfer analysis of functionally graded truncated cone", Heat Transfer Engineering, vol. 40, no. 7, pp.588-603, 2019.

Saeid Sahmani ، Mohammad Fotouhi ، MOHAMMADI AGHDAM MOHAMMAD, "Size-dependent nonlinear secondary resonance of micro-/nano-beams made of nano-porous biomaterials including truncated cube cells", Acta Mechanica, vol. 230, no. 3, pp.1077-1103, 2019.

Saeed Sahmani ، SABER SAMANDARI SAEED ، Amirsalar Khandan ، MOHAMMADI AGHDAM MOHAMMAD, "Influence of MgO nanoparticles on the mechanical properties of coated hydroxyapatite nanocomposite scaffolds produced via space holder technique: Fabrication, characterization and simulation", Journal of The Mechanical Behavior of Biomedical Materials, vol. 95, no. 0, pp.76-88, 2019.

Hossein Kabir ، MOHAMMADI AGHDAM MOHAMMAD, "A robust Bzier based solution for nonlinear vibration and post-buckling of random checkerboard graphene nano-platelets reinforced composite beams", Composite Structures, vol. 212, no. 0, pp.184-198, 2019.

Saeed Sahmani ، Shahali ، Ghadirinejad ، Amirsalar Khandan ، MOHAMMADI AGHDAM MOHAMMAD ، SABER SAMANDARI SAEED, "Effect of copper oxide nanoparticles on electrical conductivity and cell viability of calcium phosphate scaffolds with improved mechanical strength for bone tissue engineering", European Physical Journal Plus, vol. 134, no. 0, pp.7-18, 2019.

M.M. Keleshteri ، Hamed Asadi ، MOHAMMADI AGHDAM MOHAMMAD, "Nonlinear bending analysis of FG-CNTRC annular plates with variable thickness on elastic foundation", Thin-Walled Structures, vol. 135, no. 0, pp.453-462, 2018.

Saeed Sahmani ، SABER SAMANDARI SAEED ، MOHAMMADI AGHDAM MOHAMMAD ، Amirsalar Khandan, "Nonlinear resonance response of porous beam type implants corresponding to various morphology shapes for bone tissue engineering applications", Journal of Materials Engineering and Performance, vol. 27, no. 10, pp.5370-5383, 2018.

GHORBANPOUR ARANI AMIRHOSEIN ، MOHAMMADI AGHDAM MOHAMMAD ، M. J. Saeeidian, "Wave Propagation Analysis of CNT Reinforced Composite Micro-Tube Conveying Viscose Fluid in Visco-Pasternak Foundation Under 2D Multi-Physical Fields", Journal of Solid Mechanics, vol. 10, no. 2, pp.232-248, 2018.

TALEBI SAEID ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD, "Numerical and experimental analysis of the closed-cell aluminium foam under low velocity impact using computerized tomography technique", Acta Mechanica Sinica, vol. 34, no. 6, pp.1-12, 2018.

Saeed Sahmani ، SABER SAMANDARI SAEED ، Amirsalar Khandan ، MOHAMMADI AGHDAM MOHAMMAD, "Nonlinear resonance investigation of nanoclay based bionanocomposite scaffolds with enhanced properties for bone substitute applications", Journal of Alloys and Compounds, vol. 773, no. 1, pp.636-653, 2018.

SARAFRAZ ALI ، Saeid Sahmani ، MOHAMMADI AGHDAM MOHAMMAD, "Nonlinear secondary resonance of nanobeams under subharmonic and superharmonic excitations including surface free energy effects", Applied Mathematical Modelling, vol. 66, no. 0, pp.195-226, 2018.

HEDAYATI REZA ، HOSSEINI TOUDESHKY HOSSEIN ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD ، Amir A Zadpoor, "Multiscale modeling of fatigue crack propagation in additively manufactured porous biomaterials", International Journal of Fatigue, vol. 113, no. 0, pp.416-427, 2018.

Saeed Sahmani ، SABER SAMANDARI SAEED ، Mahin Shahali ، Hamed Yekta ، Aghadavoudi ، Montazeran ، MOHAMMADI AGHDAM MOHAMMAD ، Amirsalar Khandan, "Mechanical and biological performance of axially bionanocomposite sandwich plate-type implant coated by biological polymer loaded novel thin film", Journal of The Mechanical Behavior of Biomedical Materials, vol. 88, no. 1, pp.238-250, 2018.

Saeed Sahmani ، Mahin Shahali ، Amirsalar Khandan ، SABER SAMANDARI SAEED ، MOHAMMADI AGHDAM MOHAMMAD, "Analytical and experimental analyses for mechanical and biological characteristics of novel nanoclay bio-nanocomposite scaffolds fabricated via space holder technique", Applied Clay Science, vol. 165, no. 1, pp.112-123, 2018.

SAHMANI SAEID ، Amirsalar Khandan ، SABER SAMANDARI SAEED ، MOHAMMADI AGHDAM MOHAMMAD, "Nonlinear bending and instability analysis of bioceramics composed with magnetite nanoparticles: Fabrication, characterization, and simulation", Ceramics International, vol. 44, no. 8, pp.9540-9549, 2018.

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD ، Timon Rabczuk, "Nonlocal strain gradient plate model for nonlinear large-amplitude vibrations of functionally graded porous micro/nano-plates reinforced with GPLs", Composite Structures, vol. 198, no. 0, pp.51-62, 2018.

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD ، Timon Rabczuk, "A unified nonlocal strain gradient plate model for nonlinear axial instability of functionally graded porous micro/nano-plates reinforced with graphene platelets", Materials Research Express, vol. 5, no. 4, pp.45048-45069, 2018.

KOLOUSHANI MEHRDAD ، HEDAYATI REZA ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD, "CT-Based Micro-Mechanical Approach to Predict Response of Closed-Cell Porous Biomaterials to Low-Velocity Impact", Journal of Imaging, vol. 4, no. 3, pp.1-15, 2018.

SAHMANI SAEID ، Amirsalar Khandan ، SABER SAMANDARI SAEED ، MOHAMMADI AGHDAM MOHAMMAD, "Vibrations of beam-type implants made of 3D printed bredigite-magnetite bio-nanocomposite scaffolds under axial compression: Application, communication and simulation", Ceramics International, vol. 44, no. 10, pp.11282-11291, 2018.

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD, "Thermo-electro-radial coupling nonlinear instability of piezoelectric shear deformable nanoshells via nonlocal elasticity theory", Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems, vol. 24, no. 2, pp.1333-1346, 2018.

HAJIKARIMI POURIA ، MOGHADAS NEJAD FEREIDOON ، MOHAMMADI AGHDAM MOHAMMAD, "Implementing General Power Law to Interconvert Linear Viscoelastic Functions of Modified Asphalt Binders", Journal of Transportation Engineering Part B-Pavements, vol. -, no. 0, , 2018.

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD ، Timon Rabczuk, "Nonlinear bending of functionally graded porous micro/nano-beams reinforced with graphene platelets based upon nonlocal strain gradient theory", Composite Structures, vol. 186, no. 0, pp.68-78, 2018.

TALEBI SAEID ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD, "The effect of impact energy parameters on the closed-cell aluminum foam crushing behavior using X-ray tomography method", Aut Journal of Mechanical Engineering, vol. 2, no. 1, pp.107-116, 2018.

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD, "Nonlinear instability of hydrostatic pressurized microtubules surrounded by cytoplasm of a living cell including nonlocality and strain gradient microsize dependency", Acta Mechanica, vol. 229, no. 0, pp.403-420, 2018.

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD, "Axial postbuckling analysis of multilayer functionally graded composite nanoplates reinforced with GPLs based on nonlocal strain gradient theory", European Physical Journal Plus, vol. 132, no. 11, pp.490-507, 2017.

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD, "Nonlocal strain gradient beam model for postbuckling and associated vibrational response of lipid supramolecular protein micro/nano-tubules", Mathematical Biosciences, vol. 295, no. 0, pp.24-35, 2017.

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD, "Nonlinear vibrations of pre- and post-buckled lipid supramolecular micro/nano-tubules via nonlocal strain gradient elasticity theory", Journal of Biomechanics, vol. 65, no. 0, pp.49-60, 2017.

TALEBI SAEID ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD ، MIRBAGHERI SEYED MOHAMMAD H., "Micro-macro analysis of closed-aluminum foam with crushing behavior subjected to dynamic loadings", Materials Today Communications, vol. 13, no. 13, pp.170-177, 2017.

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD, "Size-dependent nonlinear bending of micro/nano-beams made of nanoporous biomaterials including a refined truncated cube cell", Physics Letters A, vol. 381, no. 45, pp.3818-3830, 2017.

ZAMANI HESAMALDIN ، MOHAMMADI AGHDAM MOHAMMAD ، SADIGHI MOJTABA, "Free vibration analysis of thick viscoelastic composite plates on visco-Pasternak foundation using higher-order theory", Composite Structures, vol. 182, no. 0, pp.25-35, 2017.

Ali Fallah ، M. T. Ahmadian ، MOHAMMADI AGHDAM MOHAMMAD, "Rate-Dependent Behavior of Connective Tissue through a Micromechanics- Based Hyper Viscoelastic Model", International Journal of Engineering Science, vol. 121, no. 0, pp.91-107, 2017.

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD, "Nonlocal strain gradient shell model for axial buckling and postbuckling analysis of magneto-electro-elastic composite nanoshells", Composites Part B-Engineering, vol. 132, no. 0, pp.258-274, 2017.

Heydarpour Y. ، MOHAMMADI AGHDAM MOHAMMAD, "Response of VSCL plates under moving load using a mixed integral-differential quadrature and novel NURBS based multi-step method", Composites Part B-Engineering, vol. 140, no. 0, pp.260-280, 2017.

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD ، BAHRAMI MOHSEN, "An efficient size-dependent shear deformable shell model and molecular dynamics simulation for axial instability analysis of silicon nanoshells", Journal of Molecular Graphics and Modelling, vol. 77, no. 0, pp.263-279, 2017.

100

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD, "A nonlocal strain gradient hyperbolic shear deformable shell model for radial postbuckling analysis of functionally graded multilayer GPLRC nanoshells", Composite Structures, vol. 178, no. 0, pp.97-109, 2017.

101

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD, "Nonlinear instability of axially loaded functionally graded multilayer graphene platelet-reinforced nanoshells based on nonlocal strain gradient elasticity theory", International Journal of Mechanical Sciences, vol. 131-132, no. 0, pp.95-106, 2017.

102

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD, "Nonlocal strain gradient beam model for nonlinear vibration of prebuckled and postbuckled multilayer functionally graded GPLRC nanobeams", Composite Structures, vol. 179, no. 0, pp.77-88, 2017.

103

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD, "Boundary layer modeling of nonlinear axial buckling behavior of functionally graded cylindrical nanoshells based on the surface elasticity theory", Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, vol. 42, no. 3, pp.229-245, 2017.

104

Ali Fallah ، M. T. Ahmadian ، K. Firozbakhsh ، MOHAMMADI AGHDAM MOHAMMAD, "Micromechanical modeling of rate-dependent behavior of Connective tissues", Journal of Theoretical Biology, vol. 416, no. 0, pp.119-128, 2017.

105

Yasin Heydarpour ، MOHAMMADI AGHDAM MOHAMMAD, "A coupled integral-differential quadrature and B-spline based multi-step technique for transient analysis of VSCL plates", Acta Mechanica, vol. 0, no. 0, pp.1-22, 2017.

106

MOHAMMADZADEH KELESHTERI MOHAMMAD ، ASADI HAMED ، MOHAMMADI AGHDAM MOHAMMAD, "Geometrical nonlinear free vibration responses of FG-CNT reinforced composite annular sector plates integrated with piezoelectric layers", Composite Structures, vol. 171, no. 0, pp.100-112, 2017.

107

SHEIKHOLESLAMI SEYED ABDOLLAH ، MOHAMMADI AGHDAM MOHAMMAD ، E. Zappino ، E. Carrera, "Application of refined beam elements to the coupled-field analysis of magnetostrictive microbeams", Composites Part B-Engineering, vol. 115, no. 0, pp.14-20, 2017.

108

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD, "Size-dependent axial instability of microtubules surrounded by cytoplasm of a living cell based on nonlocal strain gradient elasticity theory", Journal of Theoretical Biology, vol. 422, no. 0, pp.59-71, 2017.

109

EYNBEYGI MEHDI ، MOHAMMADI AGHDAM MOHAMMAD, "On the micro-mechanical study of 1-3 type piezoelectric composites with semi-coupled thermo-electro-elastic effects", Meccanica, vol. 0, no. 0, pp.1-19, 2017.

110

ZAMANI HESAMALDIN ، MOHAMMADI AGHDAM MOHAMMAD ، Salehi Manouchehr, "Free damped vibration analysis of Mindlin plates with hybrid material-foundation viscoelasticity", International Journal of Mechanical Sciences, vol. 121, no. 0, pp.33-43, 2017.

111

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD, "Size dependency in axial postbuckling behavior of hybrid FGM exponential shear deformable nanoshells based on the nonlocal elasticity theory", Composite Structures, vol. 166, no. 0, pp.104-113, 2017.

112

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD, "Imperfection sensitivity of the size-dependent postbuckling response of pressurized FGM nanoshells in thermal environments", Archives of Civil and Mechanical Engineering, vol. 17, no. 0, pp.623-638, 2017.

113

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD ، BAHRAMI MOHSEN, "Nonlinear buckling and postbuckling behavior of cylindrical shear deformable nanoshells subjected to radial compression including surface free energy effects", Acta Mechanica Solida Sinica, vol. 30, no. 0, pp.209-222, 2017.

114

HEDAYATI REZA ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD ، Zadpoor A. A., "Analytical relationships for the mechanical properties of additively manufactured porous biomaterials based on octahedral unit cells", Applied Mathematical Modelling, vol. 46, no. 0, pp.408-422, 2017.

115

HEDAYATI REZA ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD ، HOSSEINI TOUDESHKY HOSSEIN, "Comparison of elastic properties of open?cell metallic biomaterials with different unit cell types", Journal of Biomedical Materials Research Part B-Applied Biomaterials, vol. 0, no. 0, pp.1-13, 2017.

116

MOHAMMADI AGHDAM MOHAMMAD ، S. R. Morsali ، HOSSEINI SEYED MOHAMMAD AMIN ، SADIGHI MOJTABA, "Mechanical Behavior of Unidirectional SiC/Ti Composites subjected to off-axis loading at Elevated Temperatures", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 688, no. 0, pp.244-249, 2017.

117

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD, "Temperature-dependent nonlocal instability of hybrid FGM exponential shear deformable nanoshells including imperfection sensitivity", International Journal of Mechanical Sciences, vol. 122, no. 0, pp.129-142, 2017.

118

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD, "Nonlinear instability of hydrostatic pressurized hybrid FGM exponential shear deformable nanoshells based on nonlocal continuum elasticity", Composites Part B-Engineering, vol. 114, no. 0, pp.404-417, 2017.

119

HEDAYATI REZA ، Shahram Janbaz ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD ، Amir Abbas Zadpoor, "How does tissue regeneration influence the mechanical behavior of additively manufactured porous biomaterials?", Journal of The Mechanical Behavior of Biomedical Materials, vol. 65, no. 0, pp.831-841, 2016.

120

HEDAYATI REZA ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD ، Amir Abbas Zadpoor, "Mechanical properties of additively manufactured octagonal honeycombs", Materials Science and Engineering C-Materials For Biological Applications, vol. 69, no. 0, pp.1307-1317, 2016.

121

HEDAYATI REZA ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD ، Amir Abbas Zadpoor, "Mechanical Properties of Additively Manufactured Thick Honeycombs", Materials, vol. 9, no. 8, pp.613-636, 2016.

122

HEYDARPOUR YASIN ، MOHAMMADI AGHDAM MOHAMMAD, "A hybrid Bzier based multi-step method and differential quadrature for 3D transient response of variable stiffness composite plates", Composite Structures, vol. 154, no. 0, pp.344-359, 2016.

123

HEYDARPOUR YASIN ، MOHAMMADI AGHDAM MOHAMMAD, "A novel hybrid Bezier based multi-step and differential quadrature method for analysis of rotating FG conical shells under thermal shock", Composites Part B-Engineering, vol. 97, no. 0, pp.120-140, 2016.

124

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD ، BAHRAMI MOHSEN, "Surface free energy effects on the postbuckling behavior of cylindrical shear deformable nanoshells under combined axial and radial compressions", Meccanica, vol. 0, no. 0, pp.1-24, 2016.

125

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD ، A.H. Akbarzadeh, "Size-dependent buckling and postbuckling behavior of piezoelectric cylindrical nanoshells subjected to compression and electrical load", Materials and Design, vol. 105, no. 0, pp.341-351, 2016.

126

HEYDARPOUR YASIN ، MOHAMMADI AGHDAM MOHAMMAD, "Transient analysis of rotating functionally graded truncated conical shells based on the Lord-Shulman model", Thin-Walled Structures, vol. 104, no. 0, pp.168-184, 2016.

127

HEDAYATI REZA ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD ، Amir Abbas Zadpoor, "Mechanical properties of regular porous biomaterials made from truncated cube repeating unit cells: Analytical solutions and computational models", Materials Science and Engineering C-Materials For Biological Applications, vol. 60, no. 0, pp.163-183, 2016.

128

MOHAMMADI AGHDAM MOHAMMAD ، MORSALI SEYEDREZA, "Effects of manufacturing environments on the residual stresses in a SiC/Ti metal-matrix composite", Science and Engineering of Composite Materials, vol. 0, no. 0, pp.1-8, 2016.

129

ZAMANI HESAMALDIN ، MOHAMMADI AGHDAM MOHAMMAD, "Hybrid material and foundation damping of Timoshenko beams", Journal of Vibration and Control, vol. 0, no. 0, pp.1-19, 2016.

130

AMEREH BOZCHALOUEE MEITHAM ، MOHAMMADI AGHDAM MOHAMMAD ، Mahdi Golkaram, "Design and modeling of a novel translational and angular micro-electromechanical accelerometer", Aerospace Science and Technology, vol. 50, no. 0, pp.15-24, 2016.

131

HEDAYATI REZA ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD ، Amir Abbas Zadpoor, "Effect of mass multiple counting on the elastic properties of open-cell regular porous biomaterials", Materials and Design, vol. 89, no. 0, pp.9-20, 2016.

132

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD ، BAHRAMI MOHSEN, "Size-dependent axialbucklingandpostbucklingcharacteristics of cylindricalnanoshellsindifferenttemperatures", International Journal of Mechanical Sciences, vol. 107, no. 0, pp.170-179, 2016.

133

A. Fallah ، M.T. Ahmadian ، K. Firozbakhsh ، MOHAMMADI AGHDAM MOHAMMAD, "Micromechanics and Constitutive Modeling of Connective Soft Tissues", Journal of The Mechanical Behavior of Biomedical Materials, vol. 60, no. 0, pp.157-176, 2016.

134

HEDAYATI REZA ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD ، Amir Abbas Zadpoor, "Mechanics of additively manufactured porous biomaterials based on the rhombicuboctahedron unit cell", Journal of The Mechanical Behavior of Biomedical Materials, vol. 53, no. 0, pp.272-294, 2015.

135

HEDAYATI REZA ، HOSSEINI TOUDESHKY HOSSEIN ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD ، Amir Abbas Zadpoor, "Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials", International Journal of Fatigue, vol. 84, no. 0, pp.67-79, 2015.

136

HEDAYATI REZA ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD ، Amir Abbas Zadpoor, "Mechanical behavior of additively manufactured porous biomaterials made from truncated cuboctahedron unit cells", International Journal of Mechanical Sciences, vol. 106, no. 0, pp.19-38, 2015.

137

DAMAN PAK MOGHADDAM ALIREZA ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "Micromechanics of shape memory alloy fiber-reinforced composites subjected to multi-axial non-proportional loadings", Journal of Intelligent Material Systems and Structures, vol. 26, no. 18, pp.2431-2445, 2015.

138

Isa Ahmadi ، MOHAMMADI AGHDAM MOHAMMAD, "Elasto-Plastic MLPG Method for Micromechanical Modeling of Heterogeneous Materials", Cmes-Computer Modeling In Engineering and Sciences, vol. 108, no. 1, pp.21-48, 2015.

139

DAMAN PAK MOGHADDAM ALIREZA ، BODAGHI MAHDI ، Liao ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "A simple and efficient 1-D macroscopic model for shape memory alloys considering ferro-elasticity effect", Smart Structures and Systems, vol. 16, no. 4, pp.641-665, 2015.

140

SAHMANI SAEID ، BAHRAMI MOHSEN ، MOHAMMADI AGHDAM MOHAMMAD, "Surface stress effects on the nonlinear postbuckling characteristics of geometrically imperfect cylindrical nanoshells subjected to axial compression", International Journal of Engineering Science, vol. 99, no. 0, pp.92-106, 2015.

141

SAHMANI SAEID ، BAHRAMI MOHSEN ، MOHAMMADI AGHDAM MOHAMMAD, "Surface stress effects on the nonlinear postbuckling characteristics of geometrically imperfect cylindrical nanoshells subjected to torsional load", Composites Part B-Engineering, vol. 84, no. 0, pp.140-154, 2015.

142

BODAGHI MAHDI ، DAMAN PAK MOGHADDAM ALIREZA ، Liao ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "Modeling and analysis of reversible shape memory adaptive panels", Journal of Intelligent Material Systems and Structures, vol. 0, no. 0, pp.1-26, 2015.

143

DAMAN PAK MOGHADDAM ALIREZA ، W.H. Liao ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD ، BODAGHI MAHDI, "Micro-macro thermo-mechanical analysis of axisymmetric shape memory alloy composite cylinders", Composite Structures, vol. 131, no. 0, pp.1001-1016, 2015.

144

SAHMANI SAEID ، BAHRAMI MOHSEN ، MOHAMMADI AGHDAM MOHAMMAD ، Reza Ansari, "Postbuckling behavior of circular higher-order shear deformable nanoplates including surface energy effects", Applied Mathematical Modelling, vol. 39, no. 13, pp.3678-3689, 2015.

145

SAHMANI SAEID ، BAHRAMI MOHSEN ، MOHAMMADI AGHDAM MOHAMMAD, "Surface stress effects on the postbuckling behavior of geometrically imperfect cylindrical nanoshells subjected to combined axial and radial compressions", International Journal of Mechanical Sciences, vol. 100, no. 0, pp.1-22, 2015.

146

MOHAMMADI AGHDAM MOHAMMAD ، HOSSEINI SEYED MOHAMMAD AMIN ، MORSALI SEYEDREZA, "Simulation of interface damage in metal matrix composites under off-axis loading using cohesive zone model", Computational Materials Science, vol. 108, no. 0, pp.42-47, 2015.

147

EYNBEYGI MEHDI ، MOHAMMADI AGHDAM MOHAMMAD, "A micromechanical study on the electro-elastic behavior of piezoelectric fiber-reinforced composites using the element-free Galerkin method", Acta Mechanica, vol. 0, no. 0, pp.1-18, 2015.

148

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD ، BAHRAMI MOHSEN, "On the postbuckling behavior of geometrically imperfect cylindrical nanoshells subjected to radial compression including surface stress effects", Composite Structures, vol. 131, no. 0, pp.414-424, 2015.

149

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD ، BAHRAMI MOHSEN, "Nonlinear buckling and postbuckling behavior of cylindrical nanoshells subjected to combined axial and radial compressions incorporating surface stress effects", Composites Part B-Engineering, vol. 79, no. 0, pp.676-691, 2015.

150

ASADI HAMED ، A. H. Akbarzadeh ، Z. T. Chen ، MOHAMMADI AGHDAM MOHAMMAD, "Enhanced thermal stability of functionally graded sandwich cylindrical shells by shape memory alloys", Smart Materials and Structures, vol. 24, no. 4, pp.1-14, 2015.

151

ASADI HAMED ، KIANI HARCHEGANI YASSER ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "Enhanced thermal buckling of laminated composite cylindrical shells with shape memory alloy", Journal of Composite Materials, vol. 0, no. 0, pp.1-14, 2015.

152

BODAGHI MAHDI ، SHAKERI MAHMOUD ، MOHAMMADI AGHDAM MOHAMMAD, "Passive vibration control of plate structures using shape memory alloy ribbons", Journal of Vibration and Control, vol. 0, no. 0, pp.1-20, 2015.

153

DAMAN PAK MOGHADDAM ALIREZA ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "Micromechanics of Shape Memory Alloy Fiber-reinforced Composites Subjected to Multi-axial Non-proportional Loadings", Journal of Intelligent Material Systems and Structures, vol. 0, no. 0, pp.1-15, 2014.

154

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD ، BAHRAMI MOHSEN, "On the free vibration characteristics of postbuckled third-order shear deformable FGM nanobeams including surface effects", Composite Structures, vol. 121, no. 0, pp.377-385, 2014.

155

DAMAN PAK MOGHADDAM ALIREZA ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "Micro-mechanics of Composite with SMA Fibers Embedded in Metallic/Polymeric Matrix Under Off-axial Loadings", European Journal of Mechanics A-Solids, vol. 49, no. 0, pp.467-480, 2014.

156

BODAGHI MAHDI ، SHAKERI MAHMOUD ، MOHAMMADI AGHDAM MOHAMMAD, "Thermo-mechanical behavior of shape adaptive composite plates with surface-bonded shape memory alloy ribbons", Composite Structures, vol. 119, no. 0, pp.115-133, 2014.

157

NIKNAMJAHROMI HAMED ، MOHAMMADI AGHDAM MOHAMMAD, "A semi analytical approach for large amplitude free vibration and buckling of nonlocal FG beams resting on elastic foundation", Composite Structures, vol. 119, no. 0, pp.452-462, 2014.

158

SEYEDKANANI MIRALIREZA ، NIKNAMJAHROMI HAMED ، OHADI HAMADANI ABDOLREZA ، MOHAMMADI AGHDAM MOHAMMAD, "Effect of nonlinear elastic foundation on large amplitude free and forced vibration of functionally graded beam", Composite Structures, vol. 115, no. 0, pp.60-68, 2014.

159

HEYDARPOUR YASIN ، MOHAMMADI AGHDAM MOHAMMAD ، Pirooz Malekzadeh, "Free vibration analysis of rotating functionally graded carbon nanotube-reinforced composite truncated conical shells", Composite Structures, vol. 117, no. 0, pp.187-200, 2014.

160

ZAMANI HESAMALDIN ، BODAGHI MAHDI ، MOHAMMADI AGHDAM MOHAMMAD ، Salehi Manouchehr, "Accurate Damping Analysis of Viscoelastic Composite Beams and Plates on Suppressive Foundation", Journal of Composite Materials, vol. 0, no. 0, , 2014.

161

SAHMANI SAEID ، BAHRAMI MOHSEN ، MOHAMMADI AGHDAM MOHAMMAD ، Reza Ansari, "Surface effects on the nonlinear forced vibration response of third-order shear deformable nanobeams", Composite Structures, vol. 118, no. 0, pp.149-158, 2014.

162

EYNBEYGI MEHDI ، MOHAMMADI AGHDAM MOHAMMAD, "A micromechanical study on the electro-elastic behavior of piezoelectric fibrous composites using element free Galerkin method", , vol. 14, no. 6, pp.175-184, 2014.

163

AKBARI BENI MARJAN ، KIANI HARCHEGANI YASSER ، MOHAMMADI AGHDAM MOHAMMAD ، ESLAMI MOHAMMAD REZA, "Free vibration of FGM Lvy conical panels", Composite Structures, vol. 116, no. 0, pp.732-746, 2014.

164

NIKNAMJAHROMI HAMED ، FALLAH ALI ، MOHAMMADI AGHDAM MOHAMMAD, "Nonlinear bending of functionally graded tapered beams subjected to thermal and mechanical loading", International Journal of Non-Linear Mechanics, vol. 65, no. 0, pp.141-147, 2014.

165

DAMAN PAK MOGHADDAM ALIREZA ، BODAGHI MAHDI ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "Shape Control of Shape Memory Alloy Composite Beams in the Post-buckling Regime", Aerospace Science and Technology, vol. 0, no. 0, , 2014.

166

ASADI HAMED ، BODAGHI MAHDI ، SHAKERI MAHMOUD ، MOHAMMADI AGHDAM MOHAMMAD, "Nonlinear Dynamics of SMA Fibers Reinforced Composite Beams Subjected to a Primary/Secondary- Resonance Excitation", Acta Mechanica, vol. 0, no. 0, , 2014.

167

BODAGHI MAHDI ، DAMAN PAK MOGHADDAM ALIREZA ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "A robust three-dimensional phenomenological model for polycrystalline SMAs: Analytical closed-form solutions", International Journal of Engineering Science, vol. 82, no. 0, pp.1-21, 2014.

168

MOHAMMADI AGHDAM MOHAMMAD ، MORSALI SEYEDREZA, "Effects of manufacturing parameters on residual stresses in SiC/Ti composites by an elastic-viscoplastic micromechanical model", Computational Materials Science, vol. 91, no. 0, pp.62-67, 2014.

169

KIASAT MEHDI SAEED ، ZAMANI HESAMALDIN ، MOHAMMADI AGHDAM MOHAMMAD, "On the transient response of viscoelastic beams and plates on viscoelastic medium", International Journal of Mechanical Sciences, vol. 83, no. 2014, pp.133-145, 2014.

170

DAMAN PAK MOGHADDAM ALIREZA ، BODAGHI MAHDI ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "On the vibration control capability of shape memory alloy composite beams", Composite Structures, vol. 110, no. 1, pp.325-334, 2014.

171

HEDAYATI REZA ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD, "On the difference of pressure readings from the numerical, experimental and theoretical results in different bird strike studies", Aerospace Science and Technology, vol. 0, no. 0, , 2013.

172

ASADI HAMED ، MOHAMMADI AGHDAM MOHAMMAD, "Large amplitude vibration and post-buckling analysis of variable cross-section composite beams on nonlinear elastic foundation", International Journal of Mechanical Sciences, vol. 0, no. 0, , 2013.

173

MOHAMMADI AGHDAM MOHAMMAD ، SHAHBAZ MILAD, "Effects of Interphase Damage and Residual Stresses on Mechanical Behavior of Particle Reinforced Metal-Matrix Composites", Applied Composite Materials, vol. 0, no. 0, , 2013.

174

BODAGHI MAHDI ، DAMAN PAK MOGHADDAM ALIREZA ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "Active shape/stress control of shape memory alloy laminated beams", Composites Part B-Engineering, vol. 56, no. 0, pp.889-899, 2013.

175

ASADI HAMED ، BODAGHI MAHDI ، SHAKERI MAHMOUD ، MOHAMMADI AGHDAM MOHAMMAD, "On the free vibration of thermally pre/post-buckled shear deformable SMA hybrid composite beams", Aerospace Science and Technology, vol. 31, no. 1, pp.73-86, 2013.

176

BODAGHI MAHDI ، DAMAN PAK MOGHADDAM ALIREZA ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "A phenomenological SMA model for combined axial-torsional proportional/non-proportional loading conditions", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 587, no. 0, pp.12-26, 2013.

177

BODAGHI MAHDI ، DAMAN PAK MOGHADDAM ALIREZA ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "Geometrically non-linear transient thermo-elastic response of FG beams integrated with a pair of FG piezoelectric sensors", Composite Structures, vol. 107, no. 1, pp.48-59, 2013.

178

ASADI HAMED ، BODAGHI MAHDI ، SHAKERI MAHMOUD ، MOHAMMADI AGHDAM MOHAMMAD, "An analytical approach for nonlinear vibration and thermal stability of shape memory alloy hybrid laminated composite beams", European Journal of Mechanics A-Solids, vol. 42, no. 0, pp.454-468, 2013.

179

NIKNAMJAHROMI HAMED ، MOHAMMADI AGHDAM MOHAMMAD ، FALLAH ALI, "Free vibration analysis of Mindlin plates partially resting on Pasternak foundation", International Journal of Mechanical Sciences, vol. 75, no. 1, pp.1-7, 2013.

180

MOHAMMADI AGHDAM MOHAMMAD ، MORSALI SEYEDREZA, "Damage initiation and collapse behavior of unidirectional metal matrix composites at elevated temperatures", Computational Materials Science, vol. 79, no. 1, pp.402-407, 2013.

181

ASADI HAMED ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "Vibration analysis of axially moving line supported functionally graded plates with temperature-dependent properties", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 0, no. 0, , 2013.

182

HEYDARPOUR YASIN ، Dr. P. Malekzadeh ، MOHAMMADI AGHDAM MOHAMMAD, "Free vibration of functionally graded truncated conical shells under internal pressure", Meccanica, vol. 0, no. 0, , 2013.

183

MOUSAZADEGAN FATEMEH ، SAHARKHIZ SIAMAK ، Latifi Masoud ، MOHAMMADI AGHDAM MOHAMMAD, "Seam Pucker Rating by Deconvolution Residual Method", International Journal of Clothing Science and Technology, vol. 25, no. 3, pp.150-170, 2013.

184

DAMAN PAK MOGHADDAM ALIREZA ، SHAKERI MAHMOUD ، MOHAMMADI AGHDAM MOHAMMAD, "A new finite element model for low-velocity impact analysis of sandwich beams subjected to multiple projectiles", Composite Structures, vol. 104, no. 1, pp.21-33, 2013.

185

DAMAN PAK MOGHADDAM ALIREZA ، BODAGHI MAHDI ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "Active control of geometrically non-linear transient response of sandwich beams with a flexible core using piezoelectric patches", Composite Structures, vol. 100, no. 0, pp.517-531, 2013.

186

FALLAH ALI ، MOHAMMADI AGHDAM MOHAMMAD, "Large Amplitude Free Vibration and Post Buckling Analysis of Asymmetrically Laminated Beams on Pasternak Foundation", Nonlinear Engineering, vol. 1, no. 1, pp.35-48, 2012.

187

GOLKARAM MAHDI ، MOHAMMADI AGHDAM MOHAMMAD, "Free transverse vibration analysis of thin rectangular plates locally suspended on elastic beam", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 0, no. 0, , 2012.

188

BODAGHI MAHDI ، DAMAN PAK MOGHADDAM ALIREZA ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "Nonlinear active control of FG beams in thermal environments subjected to blast loads with integrated FGP sensor/actuator layers", Composite Structures, vol. 94, no. 10, pp.3612-3623, 2012.

189

BAYAT MOHAMMAD ، MOHAMMADI AGHDAM MOHAMMAD, "A micromechanics based analysis of hollow fiber composites using DQEM", Composites Part B-Engineering, vol. 0, no. 0, , 2012.

190

Ali Fallah ، MOHAMMADI AGHDAM MOHAMMAD ، M. H. Kargarnovin, "Free vibration analysis of moderately thick functionally graded plates on elastic foundation using the extended Kantorovich method", Archive of Applied Mechanics, vol. 0, no. 0, , 2012.

191

AMERI EHSAN ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "Global optimization of laminated cylindrical panels based on fundamental natural frequency", Composite Structures, vol. 0, no. 0, , 2012.

192

BAYAT MOHAMMAD ، MOHAMMADI AGHDAM MOHAMMAD, "MICROMECHANICAL ANALYSIS OF UNIDIRECTIONAL COMPOSITES USING A LEAST-SQUARES-BASED DIFFERENTIAL QUADRATURE ELEMENT METHOD", Journal of Mechanics of Materials and Structures, vol. 7, no. 2, pp.119-135, 2012.

193

ZAMANI MAHDI ، FALLAH ALI ، MOHAMMADI AGHDAM MOHAMMAD, "Free vibration analysis of moderately thick trapezoidal symmetrically laminated plates with various combinations of boundary conditions", European Journal of Mechanics A-Solids, vol. 36, no. 0, pp.204-212, 2012.

194

BAYAT MOHAMMAD ، MOHAMMADI AGHDAM MOHAMMAD, "A micromechanics-based analysis of effects of square and hexagonal fiber arrays in fibrous composites using DQEM", European Journal of Mechanics A-Solids, vol. 32, no. 1, pp.32-40, 2012.

195

FALLAH ALI ، MOHAMMADI AGHDAM MOHAMMAD, "Thermo-mechanical buckling and nonlinear free vibration analysis of functionally graded beams on nonlinear elastic foundation", Composites Part B-Engineering, vol. 0, no. 0, , 2011.

196

M. J. Mahmoodi ، MOHAMMADI AGHDAM MOHAMMAD, "Damage analysis of fiber reinforced Ti-alloy subjected to multi-axial loading - A Micromechanical approach", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 528, no. 27, pp.7983-7990, 2011.

197

FALLAH ALI ، MOHAMMADI AGHDAM MOHAMMAD, "Nonlinear free vibration and post-buckling analysis of functionally graded beams on nonlinear elastic foundation", European Journal of Mechanics A-Solids, vol. 30, no. 4, pp.571-583, 2011.

198

MALEKI SATTAR ، ANDAKHSHIDEH ATIEH ، MOHAMMADI AGHDAM MOHAMMAD, "Bending Analysis of Moderately Thick Laminated Conical Panels With Various Boundary Conditions", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 225, no. 6, pp.1291-1300, 2011.

199

AHMADI ISA ، MOHAMMADI AGHDAM MOHAMMAD, "Heat transfer in composite materials using a new truly local meshless method", International Journal of Numerical Methods For Heat and Fluid Flow, vol. 21, no. 3, pp.293-309, 2011.

200

NOBAKHTI SABAH ، MOHAMMADI AGHDAM MOHAMMAD, "Static analysis of rectangular thick plates resting on two-parameter elastic boundary strips", European Journal of Mechanics A-Solids, vol. 30, no. 3, pp.442-448, 2011.

201

MARDANI MEHRABAD NEMATALLAH ، Safar Johari Majid ، MOHAMMADI AGHDAM MOHAMMAD, "Using Finite- Element Method for Analyzing the Effect of Coriolis Acceleration on the Ring- Spinning Balloon", Chemical, Polymer and Material Science and Technology, Amirkabir, vol. سال بیست و, no. 72, pp.93-98, 2011.

202

MOHAMMADI AGHDAM MOHAMMAD ، SHAHMANSOURI NASTARAN ، BIGDELI KASRA, "Bending Analysis of Moderately Thick Functionally Graded Conical Panels", Composite Structures, vol. 93, no. 5, pp.1376-1384, 2011.

203

Ali Fallah ، SHAHSAVARI HAMID ، A. Pasharavesh ، MOHAMMADI AGHDAM MOHAMMAD, "Large amplitude thermo-mechanical vibration analysis of symmetrically laminated composite beams", Key Engineering Materials, vol. 471, no. 1, pp.745-750, 2011.

204

Ali Fallah ، M.H. Kargarnovin ، MOHAMMADI AGHDAM MOHAMMAD, "Free vibration analysis of symmetrically laminated fully clamped skew plates using extended Kantorovich method", Key Engineering Materials, vol. 471, no. 1, pp.739-744, 2011.

205

BIGDELI KASRA ، MOHAMMADI AGHDAM MOHAMMAD, "A SEMI ANALYTICAL SOLUTION FOR THE BENDING OF CLAMPED LAMINATED DOUBLY CURVED OR SPHERICAL PANELS", Journal of Mechanics of Materials and Structures, vol. 5, no. 6, pp.855-873, 2010.

206

AHMADI ISA ، MOHAMMADI AGHDAM MOHAMMAD, "A Generalized Plane Strain Meshless Local Petrov-Galerkin Method for the Micromechanics of Thermomechanical Loading of Composites", Journal of Mechanics of Materials and Structures, vol. 5, no. 4, , 2010.

207

FALAHATGAR SAYED REZA ، Salehi Manouchehr ، MOHAMMADI AGHDAM MOHAMMAD, "Micro-Macro Analysis of Viscoelastic Unidirectional Laminated Composite Plates Using DR Method", Applied Composite Materials, vol. 17, no. 5, , 2010.

208

AHMADI ISA ، MOHAMMADI AGHDAM MOHAMMAD, "A truly generalized plane strain meshless method for combined normal and shear loading of fibrous composites", Engineering Analysis With Boundary Elements, vol. 0, no. 0, , 2010.

209

AHMADI ISA ، Nasrin Sheikhi ، MOHAMMADI AGHDAM MOHAMMAD ، Nourazar Khoshknab S.Salman, "A new local meshless method for steady-state heat conduction in heterogeneous materials", Engineering Analysis With Boundary Elements, vol. 34, no. 12, pp.1105-1112, 2010.

210

MOHAMMADI AGHDAM MOHAMMAD ، SHAHMANSOURI NASTARAN ، MOHAMMADI MASOUD, ". Extended Kantorovich method for static analysis of moderately thick functionally graded sector plates", Mathematics and Computers In Simulation, vol. 0, no. 0, , 2010.

211

MOHAMMADI AGHDAM MOHAMMAD ، BIGDELI KASRA ، SHAHMANSOURI NASTARAN, "A Semi-Analytical Solution for Bending of Moderately Thick Doubly Curved Functionally Graded Panels", Mechanics of Advanced Materials and Structures, vol. 17, no. 5, , 2010.

212

ABKAR MAHDI ، FOROOGHI POURYA ، ABBASSI ABBAS ، MOHAMMADI AGHDAM MOHAMMAD, "Heat transfer of non-Newtonian fluid flow in a channel lined with porous layers under thermal non-equilibrium condition", Journal of Porous Media, vol. 13, no. 3, , 2010.

213

CHAMANI HAMID REZA ، SATTARI FAR IRAJ ، MOHAMMADI AGHDAM MOHAMMAD, "A study on the thermal boundary condition effects on the distribution of temperature inside diesel engines", , vol. 5, no. 17, pp.71-81, 2010.

214

MAHMOODI MOHAMMAD JAVAD ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "Micromechanical modeling of interface damage of metal matrix composites subjected to off-axis loading", , vol. , no. 31, , 2010.

215

AHMADI ISA ، MOHAMMADI AGHDAM MOHAMMAD, "Micromechanics of Fibrous Composites Subjected to Combined Shear and Thermal loading using a Truly Meshless Method", Computational Mechanics, vol. 0, no. 0, , 2010.

216

AHMADI ISA ، MOHAMMADI AGHDAM MOHAMMAD, "Analysis of micro-stresses in a SiC/Ti metal matrix composite using a truly local meshless method", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 224, no. 0, , 2009.

217

MAHMOODI MOHAMMAD JAVAD ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "The effects of interfacial debonding on the elastoplastic response of unidirectional silicon carbide-titanium composites", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 224, no. 2, , 2009.

218

MOHAMMADI AGHDAM MOHAMMAD ، GORJI BANDPAY MAYSAM ، FALAHATGAR SAYED REZA, "Interface damage of SiC/Ti metal matrix composites subjected to combined thermal and axial shear loading", Computational Materials Science, vol. , no. , , 2009.

219

MARDANI MEHRABAD NEMATALLAH ، Safar Johari Majid ، MOHAMMADI AGHDAM MOHAMMAD, "Finite-Element and Multivariate Analyses of Tension Distribution and Spinning Parameters Effects on the Ring-Spinning Balloon", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 224, no. 2, , 2009.

220

ANDAKHSHIDEH ATIEH ، ، MOHAMMADI AGHDAM MOHAMMAD, "Non-Linear Bending Analysis of Laminated Sector Plates Using Generalized Differential Quadrature", Composite Structures, vol. 92, no. 9, , 2009.

221

ALIJANI FARBOD ، MOHAMMADI AGHDAM MOHAMMAD, "A semi-analytical solution for stress analysis of moderately thick laminated cylindrical panels with various boundary conditions", Composite Structures, vol. , no. 89, , 2009.

222

FALAHATGAR SAYED REZA ، Salehi Manouchehr ، MOHAMMADI AGHDAM MOHAMMAD, "Nonlinear Viscoelastic Response of Unidirectional Fiber-Reinforced Composites in Off-Axis Loading", Journal of Reinforced Plastics and Composites, vol. , no. 15, , 2009.

223

MOHAMMADI AGHDAM MOHAMMAD ، MOHAMMADI MASOUD, "Bending analysis of thick orthotropic sector plates with various loading and boundary conditions", Composite Structures, vol. , no. 88, , 2009.

224

MOUSAVI SEYED MAHMOUD ، MOHAMMADI AGHDAM MOHAMMAD, "Static Bending Analysis of Laminated Cylindrical Panels With Various Boundary Conditions Using The Differential Cubature Method", Journal of Mechanics of Materials and Structures, vol. , no. 3, , 2009.

225

MOHAMMADI AGHDAM MOHAMMAD ، FALAHATGAR SAYED REZA ، GORJI BANDPAY MAYSAM, "Micromechanical consideration of interface damage in fiber reinforced Ti-alloy under various combined loading conditions", , vol. , no. 68, , 2008.

226

ALIJANI FARBOD ، MOHAMMADI AGHDAM MOHAMMAD ، ABOUHAMZE MORTEZA, "Application of the extended Kantorovich method to the bending of clamped cylindrical panels", European Journal of Mechanics A-Solids, vol. , no. 27, , 2008.

227

MOHAMMADI AGHDAM MOHAMMAD ، MOHAMMADI MASOUD ، ERFANIAN VAHID, "Bending analysis of thin annular sector plates using extended Kantorovich method", , vol. , no. 12, , 2007.

228

SHAKERI MAHMOUD ، YAS MOHAMMAD HOSEIN ، MOHAMMADI AGHDAM MOHAMMAD ، Salehi Manouchehr, "Diversity in the Mechanical Engineering Education", , vol. 9, no. 33, pp.87-123, 2007.

229

ABOUHAMZE MORTEZA ، MOHAMMADI AGHDAM MOHAMMAD ، ALIJANI FARBOD, "Bending Analysis of Symmetrically Laminated Cylindrical Panels Using The Extended Kantorovich Method", Mechanics of Advanced Materials and Structures, vol. , no. 14, , 2007.

230

MOHAMMADI AGHDAM MOHAMMAD ، NAJAFABADI FARAHANI MOHAMMADREZA ، DASHTI KHOYDAKI MAHDI ، REZAEI NIYA SEYED MOHAMMAD, "Application of Generalized Differential Quadrature Method to The Bending of Thick Laminated Plates With Various Boundary Conditions", Applied Mechanics and Materials, vol. , no. 0, , 2006.

231

ALAVI TABATABAI SAIED MOHAMMAD REZA ، MOHAMMADI AGHDAM MOHAMMAD ، EFTEKHARI SEYED ALI, "Three -Dimensional Elasticity Analysis of Thick Rectangular Laminated Composite Plates Using Meshless Local Petrov- Galerkin (MLPG ) Method", Applied Mechanics and Materials, vol. , no. 0, , 2006.

232

MOHAMMADI AGHDAM MOHAMMAD ، DEJESTAN AMIR, "Micromechanics Based Analysis of Randomly Distributed Fiber Reinforced Composites Using Simplified Unit Cell Model", Composite Structures, vol. , no. 71, , 2005.

233

MOHAMMADI AGHDAM MOHAMMAD ، FALAHATGAR SAYED REZA, "Micromechanical modeling of interface damage of metal matrix composites subjected to transverse loading", Composite Structures, vol. , no. 66, , 2004.

234

MOHAMMADI AGHDAM MOHAMMAD ، KAMALIKHAH AHMAD, "Micromechanical analysis of layered systems of MMCs subjected to bending-effects of thermal residual stresses", Composite Structures, vol. , no. 66, , 2004.

235

MOHAMMADI AGHDAM MOHAMMAD ، FALAHATGAR SAYED REZA, "Bending analysis of thick laminated plates using extended kantorovich method", Composite Structures, vol. , no. , , 2003.

236

MOHAMMADI AGHDAM MOHAMMAD ، KHUGEH AMANOLLAH, "More on the effects of thermal residual and hydrostatic stresses on yielding behavior of unidirectional composites", Composite Structures, vol. , no. 1, , 2003.

237

MOHAMMADI AGHDAM MOHAMMAD ، D.J. Smith ، M.J. Paviar, "Asymmetric behaviour of fibrous metal matrix composites", Materials Science and Technology, vol. , no. 9, , 2001.

238

MOHAMMADI AGHDAM MOHAMMAD ، M.J. Paviar ، D.J. Smith, "Micro-mechanics of off-axis loading of metal matrix composites using finite element analysis", International Journal of Solids and Structures, vol. , no. , , 2001.

239

MOHAMMADI AGHDAM MOHAMMAD ، J.A. Smith ، M.J. Paviar, "Micromechanical modelling of SiC/Ti MMC,s subjected to bending", Materials Science and Technology, vol. , no. 16, , 2000.

240

MOHAMMADI AGHDAM MOHAMMAD ، D.J. Smith ، M.J. Paviar, "Finite element micromechanical modelling of yield and collapse behaviour of metal matrix composites", Journal of The Mechanics and Physics of Solids, vol. 48, no. 3, , 2000.

241

MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD ، FARIBORZ SHAHRIAR, "Solution to the reissner plate with clamed edges", Journal of Engineering Mechanics, vol. , no. 122, , 1996.

242

SHAKERI MAHMOUD ، FARIBORZ SHAHRIAR ، MOHAMMADI AGHDAM MOHAMMAD, "Application of extended kantorovich method to the bending of reissner ,s plate", , vol. 0, no. 18, , 1991.

مقالات همایش‌ها

GOLEHZAR FARZIN ، MOHAMMADI AGHDAM MOHAMMAD ، MASOUMI ALIREZA, "A Bzier-Based Numerical Approach for Static Fracture Analysis of Cracked Plates Using Peridynamics Theory,", 33rd Annual International Conference of Iranian Society of Mechanical Engineers, May 2025.

NOPOUR HOLLARI REZA ، Taghvaeipour Afshin ، MOHAMMADI AGHDAM MOHAMMAD, "Neural network-based co-simulation for enhanced analysis of 3RRR parallel robot,", The 11th RSI International Conference on Robotics and Mechatronics (ICRoM 2023) IEEE, Dec 2023.

NOPOUR HOLLARI REZA ، Taghvaeipour Afshin ، MOHAMMADI AGHDAM MOHAMMAD ، Francisco Gonz?lez, "Novel co-simulation technique in the flexible analysis of a parallel robot,", The 10th RSI International Conference on Robotics and Mechatronics (ICRoM 2022) IEEE, Nov 2022.

MANSOURI SEYED NAVID ، SADIGHI MOJTABA ، BENVIDI MOHAMMAD HOSEIN ، MOHAMMADI AGHDAM MOHAMMAD, "Thermomechanical Modeling of Particulate Composites made of Shape Memory Alloys (SMA) Inclusions in Metal Matrix using Micromechanical Approaches under Static Loading,", Iranian Journal of Mechanical Engineering Transactions of ISME, May 2022.

KHALVANDI ALI ، MOHAMMADI AGHDAM MOHAMMAD ، SABER SAMANDARI SAEED, "Fabrication, characterization, and experimental analysis of a novel Gelatin-based nanocomposite scaffold with bone substitute applications,", The 29th Annual International Conference of the Iranian Association of Mechanical Engineers and the 8th Conference on Thermal Power Plants, May 2021.

KABIR HADI ، SABER SAMANDARI SAEED ، MOHAMMADI AGHDAM MOHAMMAD, "Fabrication of magnetic scaffold based on HAp/alginate for bone substitute,", 8th International congress on nanoscience and nanotechnology, Feb 2021.

KABIR HADI ، MOHAMMADI AGHDAM MOHAMMAD, "Fabrication of magnetic scaffold based on HAp/alginate for bone substitute,", 8th International e-congress on Nanoscience & Nanotechnology, Feb 2021.

KHALVANDI ALI ، MOHAMMADI AGHDAM MOHAMMAD ، SABER SAMANDARI SAEED, "Effects of different porosity volume fractions on the mechanical properties and global orthotropic behavior of gelatin closed-cell bio-foams,", The 7th International Conference on Composites: Characterization, Fabrication and Application, Dec 2020.

ALJABERI MOHAMMED HUSSEIN ، Maher AR Sadiq Al-Baghdadi ، Muhannad Al-Waily ، MOHAMMADI AGHDAM MOHAMMAD ، GOUDARZI TAHA, "Numerical Investigation of Mechanical Behavior for Lattice Structure with Effect of Different Nanomaterial Types,", 1st International Conference on Sustainable Engineering and Technology (INTCSET 2020), Dec 2020.

KHALVANDI ALI ، MOHAMMADI AGHDAM MOHAMMAD ، SABER SAMANDARI SAEED, "Micromechanical Modeling of Gelatin-Based Nano-Composite Bone Scaffolds,", 27th National and 5th International Iranian Conference of Biomedical Engineering, Nov 2020.

ESKANDARI FAEZEH ، Shafieian Mahdi ، MOHAMMADI AGHDAM MOHAMMAD ، Kaveh Laksari, "Visco-hyperelastic Properties of White and Gray Matters under Tension: an Ex-vivo Study,", The 28th Annual International Conference of Iranian Society of Mechanical Engineers-ISME2020, May 2020.

ESKANDARI FAEZEH ، Shafieian Mahdi ، MOHAMMADI AGHDAM MOHAMMAD ، Kaveh Laksari, "Mechanical Properties of Brain White Matter under Repetitive Loading Condition: Introducing a Mechanical Damage Function,", 26th National and 4th International Iranian conference on Biomedical Engineering, Nov 2019.

ESKANDARI FAEZEH ، MOHAMMADI AGHDAM MOHAMMAD ، Shafieian Mahdi, "The Effect of Compressive Cyclic Loading on the Mechanical and Histological Properties of Brain Tissue,", American Society of Biomechanics East Coast Meeting, Apr 2019.

MOEINI MOHSEN ، DEHNAVI MAHMOUDREZA ، BARBAZESFAHANI REZA ، SABER SAMANDARI SAEED ، MOHAMMADI AGHDAM MOHAMMAD, "Molecular dynamics investigation of interaction energy between polystyrene/polyethelen and SWCNT, functionalized SWCNT and DWCNT,", :The 6th International Conference on Composites(Characterization, Fabrication and Application (CCFA-6, Dec 2018.

MOEINI MOHSEN ، Saeed Sahmani ، SABER SAMANDARI SAEED ، MOHAMMADI AGHDAM MOHAMMAD, "The role of functionalized nanoparticles on cross-linked polymer/graphene by molecular dunamics simulation,", First Conference on Mechanical Behavior Modeling of Materials, Oct 2018.

MOHAMMADI NARGES ، MOHAMMADI AGHDAM MOHAMMAD ، Hamed Asadi, "instability analysis of conical shells filled with quiescent fluid with generalized differential quadrature method,", 26th Annual International Conference of Iranian Society of Mechanical Engineers, Apr 2018.

SARAFRAZ ALI ، MOHAMMADI AGHDAM MOHAMMAD ، SAHMANI SAEID, "Nonlinear oscillation analysis of nanobeams under soft excitation including surface free energy effects,", 26th Annual International Conference of Iranian Society of Mechanical Engineers, Apr 2018.

MOHAMMADI NARGES ، MOHAMMADI AGHDAM MOHAMMAD, "dynamic instability analysis of FG cylindrical shell due to fluid solid interaction,", 4th International Conference on Structural Engineering (IRAST2018), Feb 2018.

SHEIKHOLESLAMI SEYED ABDOLLAH ، MOHAMMADI AGHDAM MOHAMMAD, "A novel rational pad approximation of the inverse Langevin function,", 25th Annual International Conference on Mechanical Engineering, May 2017.

SAHMANI SAEID ، MOHAMMADI AGHDAM MOHAMMAD ، BAHRAMI MOHSEN, "Molecular mechanics modeling of hydrogen adsorbtion on boron nitride nanotubes,", 3rd International Conference on Nanotechnology, Aug 2015.

KOLOUSHANI MEHRDAD ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD ، HEDAYATI REZA, "Survey parameters affecting the mechanical behavior of metallic open cell foam under quasi static and dynamic pressure loading,", The first annual national conference in mechanical engineering and industrial solutions, Aug 2015.

HEDAYATI REZA ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD, "Effect of porosity on the static and impact response of titanium in implants used inside femur bone,", (ISME 2015), May 2015.

MORSALI SEYEDREZA ، HOSSEINI SEYED MOHAMMAD AMIN ، MOHAMMADI AGHDAM MOHAMMAD, "Finite Element Simulation of Damage Initiation and Propagation in SiC/Ti Composites Subjected to Combined Thermo-mechanical Loading,", (4th International Conference on Composites: Characterization, Fabrication, and Application (CCFA-4, Dec 2014.

DAMAN PAK MOGHADDAM ALIREZA ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "Dynamic Analysis of Delaminated sandwich Beam by using of Five Layeres Element,", The 22nd Annual International Conference on Mechanical Engineering, Apr 2014.

RAVANBAKHSH HABIBABADI HOSSEIN ، MOHAMMADI AGHDAM MOHAMMAD ، NIKNAMJAHROMI HAMED ، SADIGHI MOJTABA, "Numerical Analysis of Indentation in Sandwich Beams Based on Higher Order Theory; Differential Quadrature Method,", The 22nd Annual International Conference on Mechanical Engineering - ISME2014, Apr 2014.

RAVANBAKHSH HABIBABADI HOSSEIN ، SADIGHI MOJTABA ، Mahdi Saadati ، MOHAMMADI AGHDAM MOHAMMAD, "Failure Mode Map for Foam Core Sandwich Panel with Composite Faces under Static Local Loading,", The 22nd Annual International Conference on Mechanical Engineering - ISME2014, Apr 2014.

SHAHBAZ MILAD ، MOHAMMADI AGHDAM MOHAMMAD, "A Micromechanical study on the effects of residual stresses on the interphase damage of particular metal matrix composites,", The 3rd Int. conf. on Composites: Characterization, Fabrication and Application (CCFA-3), Dec 2012.

Isa Ahmadi ، MOHAMMADI AGHDAM MOHAMMAD, "Analysis of failure initiation in composite materials using direct micromechanical approach,", 2nd International conference on Engineering - MAT 2012, Nov 2012.

MORSALI SEYEDREZA ، MOHAMMADI AGHDAM MOHAMMAD, "The Effects of Fiber Coating on The Damage Initiation and Propagation of Unidirectional Metal Matrix Composite,", 20th Annual International Iranian Mechanical Engineering Conference, May 2012.

ABDOLLAHI ELYAS ، MOHAMMADI AGHDAM MOHAMMAD, "Bending Analysis Of Thin Sector Plates With Piezolaminated Layers Using Extended Kantrovich Method,", 20th Annual International Iranian Mechanical Engineering Conference, May 2012.

MORSALI SEYEDREZA ، MOHAMMADI AGHDAM MOHAMMAD ،, "The Effect of Cooling Rate on Thermal Residual Stress in SiC/Ti-6Al-4V Metal Matrix Composite,", 20th Annual International Iranian Mechanical Engineering Conference, May 2012.

MOHAMMADI AGHDAM MOHAMMAD ، KHODABANDEH HAMED, "Dierential cubature method for static solutions of Reissner plates on elastic foundations with various boundary conditions,", International conference on Applied Mathematics and Approximation Theory, May 2012.

AHMADI ISA ، MOHAMMADI AGHDAM MOHAMMAD, "A local elsatic-plastic meshless method for micromechanics of composite materials,", 21st International Workshop on Computational Mechanics of Materials (IWCMM 21, Aug 2011.

SAFARI-KAHNAKI ALI ، MOHAMMADI AGHDAM MOHAMMAD ، ESLAMI MOHAMMAD REZA, "Thermal stress wave propagation study of functionally graded thick hollow cylinder,", 11th International Conference Computational and Mathematical Methods in Science and Engineering, Jun 2011.

AMERI EHSAN ، SHAKERI MAHMOUD ، MOHAMMADI AGHDAM MOHAMMAD, "Implementation of the Globalized Nelder-?Mead method on fundamental frequency maximization of cylindrical panels,", 16th Int. Conf. on Composite Structures, Jun 2011.

FALLAH ALI ، MOHAMMADI AGHDAM MOHAMMAD ، M.H. Kargarnovin, "FREE VIBRATION ANALYSIS OF FUNCTIONALLY GRADED PLATES ON ELASTIC FOUNDATION USING EXTENDED KANTOROVICH METHOD,", 16th International Conference on Composite Structures, Jun 2011.

FALLAH ALI ، MOHAMMADI AGHDAM MOHAMMAD, "Bending analysis of laminated skew plates using extended Kantorovich method,", The 2nd International Conference on Composites:Characterization, Fabrication and Application (CCFA-2), Dec 2010.

FALLAH ALI ، MOHAMMADI AGHDAM MOHAMMAD, "Stress analysis of functionally graded cylinders subjected to thermo-mechanical loads based on Bernstein polynomials,", ASME 2010 International Mechanical Engineering Congress & Exposition, Nov 2010.

AHMADI ISA ، MOHAMMADI AGHDAM MOHAMMAD, "Micromechanics of Combined Loading of Fibrous Composites using a Truly Meshless Method,", ASME 2010 International Mechanical Engineering Congress & Exposition, Nov 2010.

AHMADI ISA ، MOHAMMADI AGHDAM MOHAMMAD ، Nasrin Sheikhi, "A New truly Meshless Method for Heat conduction in solid structures,", 2010 ASME International Mechanical Engineering Congress & Exposition, Nov 2010.

AHMADI ISA ، MOHAMMADI AGHDAM MOHAMMAD, "A new integral based elasto-plastic meshless method,", The 6th ICCES International Conference on Meshless and Other Novel Computational Methods, Aug 2010.

SHAHMANSOURI NASTARAN ، MOHAMMADI AGHDAM MOHAMMAD ، BIGDELI KASRA, "Static Analysis of Moderately Thick Functionally Graded Plates with Various Boundary Conditions,", 10th Biennial Conference on Engineering Systems Design and Analysis - ESDA 2010, Jul 2010.

AHMADI ISA ، MOHAMMADI AGHDAM MOHAMMAD, "A TRULY MESHLESS MODEL FOR ANALYSIS OF MICRO-STRESSES IN FIBROUS COMPOSITE MATERIALS,", 18th Annual International Conference on Mechanical Engineering (ISME2010), May 2010.

FALLAH ALI ، MOHAMMADI AGHDAM MOHAMMAD, "A New Technique For Stress Analysis Of Functionally Graded Pressure Vessels Based On Bernstein Polynomials,", 18th Annual International Conference on Mechanical Engineering -ISME2010, May 2010.

AHMADI ISA ، MOHAMMADI AGHDAM MOHAMMAD, "Unity Test Function Meshless Method for Heat Transfer in Heterogeneous Materials,", IV European conference on Computational Mechanics, May 2010.

AHMADI ISA ، MOHAMMADI AGHDAM MOHAMMAD, "A TRULY MESHLESS MODEL FOR ANALISYS OF MICRO-STRESSES IN FIBROUS COMPOSITE MATERIALS,", The 2010 International Conference on Mechanical and Aerospace Engineering (CMAE 2010), Apr 2010.

، MOHAMMADI AGHDAM MOHAMMAD, "Thermal residual strsses in metal matrix composites using a truly meshless method,", Sep 2009.

AHMADI ISA ، MOHAMMADI AGHDAM MOHAMMAD, "A truly generalized plane strain meshless model for combined normal and shear loading of fiber reinforced materials,", ICCES Special Symposium on Meshless Methods - ICCES MM09, Aug 2009.

MARDANI MEHRABAD NEMATALLAH ، Safar Johari Majid ، MOHAMMADI AGHDAM MOHAMMAD, "Finite Element Modeling of Yarn Balloom in the Ring Spinning,", 3rd Int. Conf. on Exp. / Process/System modeling/Simulation and Optimization.., Jul 2009.

ANDAKHSHIDEH ATIEH ، ، MOHAMMADI AGHDAM MOHAMMAD, "Non-linear Bending Analysis of Laminated Composite Plates Using Generalized Differential Quadrature Method,", 17th International Conference on Composite Materials -ICCM 17, Jul 2009.

MALEKI SATTAR ، MOHAMMADI AGHDAM MOHAMMAD, "Bending analysis of moderately thick laminated conical panels with various boundary conditions,", Jun 2009.

MOHAMMADI AGHDAM MOHAMMAD, "A semi analytical solution for beding of moderately thick moubly curved fuctionally graded panels,", Jun 2009.

MAHMOODI MOHAMMAD JAVAD ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "Micromechanics of randomly distributed fiber reinforced polymer matrix composites with transversely isotropic constituents,", Jun 2009.

SHAKERI MAHMOUD ، MAHMOODI MOHAMMAD JAVAD ، MOHAMMADI AGHDAM MOHAMMAD, "Micromechanical analysis of initial yielding of fiber reinforced composites subjected to various loading conditions,", Jun 2009.

، MOHAMMADI AGHDAM MOHAMMAD, "Micromechanical thermal analysis of unidirectional composite using meshless local petrov galerking method,", May 2009.

MOHAMMADI AGHDAM MOHAMMAD, "Bending analysis of moderately thick FGM plates with any bondary conditions using GDQ meghod,", May 2009.

MOHAMMADI AGHDAM MOHAMMAD, "Differential quadrature linear and non linear analysis of plates under various boundary conditions using FSDT,", May 2009.

MALEKI SATTAR ، MOHAMMADI AGHDAM MOHAMMAD, "Bending analysis of functionally graded sector plates with various boundary conditions using generalized differential quadrature method,", May 2009.

ANDAKHSHIDEH ATIEH ، MOHAMMADI AGHDAM MOHAMMAD ،, "Linear and Non-linear analysis of functionally graded plates using generalized differential quadrature method,", Composites 2009- 2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites, Apr 2009.

MOHAMMADI AGHDAM MOHAMMAD ، FAZELI SAEED, "Micromechanics of unidirectional composites using generalized differential quadrature element method,", Jan 2009.

MOHAMMADI AGHDAM MOHAMMAD ، MALEKI SATTAR ، ANDAKHSHIDEH ATIEH, "Stress analysis of thin/ Moderately thick conical panels with various boundary condeition,", Jan 2009.

ANDAKHSHIDEH ATIEH ، MOHAMMADI AGHDAM MOHAMMAD ، MALEKI SATTAR, "Non linear bending analysis of moderately thick sector plates with various boundary conditions,", Jan 2009.

MOUSAVI SEYED MAHMOUD ، MOHAMMADI AGHDAM MOHAMMAD, "Bending analysis of laminated cylindrical panels with warious boundary condition using differential cubature method,", Jan 2009.

FALAHATGAR SAYED REZA ، Salehi Manouchehr ، MOHAMMADI AGHDAM MOHAMMAD, "Micro to macro analysis of nonlinear viscoelastic composite plate using DR method,", Jan 2009.

MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD ، MAHMOODI MOHAMMAD JAVAD, "Overal properties of randomly distributed particle reinforced composites using simplified unit cell model,", Jan 2009.

SHAGHAGHI SAJJAD ، SADIGHI MOJTABA ، MOHAMMADI AGHDAM MOHAMMAD, "An Experimental and Numerical study of Buckling of Filament-Wound laminated Conical Shells under Axial Compression Loading,", the 1st International Conference on Composites: Characterization, Fabrication and Application CCFA-1, Dec 2008.

BATENI ALI ، MOHAMMADI AGHDAM MOHAMMAD ، Parvin Nader, "Prediction of Density in Porous Materials by X-ray Techniques,", Oct 2008.

MOHAMMADI AGHDAM MOHAMMAD ، GORJI BANDPAY MAYSAM ، FALAHATGAR SAYED REZA, "Interface damage of SiC Ti metal matrix composites subjected to combined thermal and axial shear loading,", Oct 2008.

MOHAMMADI AGHDAM MOHAMMAD, "Stress analysis of moderately thick functionally graded plates with mixed boundary conditions,", Oct 2008.

MOHAMMADI AGHDAM MOHAMMAD ، AHMADI IMAN, "Micromechanical modeling of unidirectional composites using meshless local petrov galerkin method,", Oct 2008.

ALIJANI FARBOD ، MOHAMMADI AGHDAM MOHAMMAD ، BAKHTIARI NEJAD FIROOZ, "Free vibration analysis of fcunctionally graded thin plates using the extended kantorovich method,", Jan 2008.

ALIJANI FARBOD ، MOHAMMADI AGHDAM MOHAMMAD, "Stress analysis of thick cylindrical panels with various boundary conditions,", Nov 2007.

MOHAMMADI AGHDAM MOHAMMAD ، MOHAMMADI MOHAMMAD, "Bending analysis of thick orthotropic sector plates with various loading and boundary conditions,", Nov 2007.

، MOHAMMADI AGHDAM MOHAMMAD, "Bending analysis of laminated thick cylindrical panel with various boundary conditions using generalized differential quadrature method,", May 2007.

MAHMOODI MOHAMMAD JAVAD ، MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD ، DEJESTAN AMIR, "Micromechanical based analysis of porous materials using simplified unit cell model,", May 2007.

REFAHI OSKOUEI AMIR ، ANSARI VAHID ، MOHAMMADI AGHDAM MOHAMMAD, "Analyzing of AE signals by wavelet to investigate damage mechanism in composite materials,", Apr 2007.

MOHAMMADI AGHDAM MOHAMMAD ، FALAHATGAR SAYED REZA, "Micromechanics based analysis of interface damage of SiC/Ti metal mitrix composites subjected to combined loading condition,", Feb 2007.

MOHAMMADI AGHDAM MOHAMMAD ، ALIJANI FARBOD, "Stress analysis of thick antisymetric cross ply panels using extended kantorovich method,", Feb 2007.

MOHAMMADI AGHDAM MOHAMMAD ، MOHAMMADI MASOUD, "Extended kantorovich method for static analysis of thick orthotropic sector plates,", Feb 2007.

MOHAMMADI AGHDAM MOHAMMAD ، FAZELI SAEED, "Bending analysis of moderately thick plates with mixed boundary conditions using generalized defferential quadrature method,", Feb 2007.

MOHAMMADI AGHDAM MOHAMMAD ، NAJAFABADI FARAHANI MOHAMMADREZA ، DASHTI KHOYDAKI MAHDI, "Application of Generalized Differential Quadrature Method to the Bending of Thick Laminated Plates with Various Boundary Conditions,", Sep 2006.

MOHAMMADI AGHDAM MOHAMMAD ، EFTECHARI ALE, "Three- dimensional elasticity analysis of thick rectangular laminated composite plates using meshless local perov- galerkin method,", Sep 2006.

MOHAMMADI AGHDAM MOHAMMAD ،, "Bending analysis of curve- sided quadrilateral thin plates using the extended kantorovich method,", Sep 2006.

Salehi Manouchehr ، MOHAMMADI AGHDAM MOHAMMAD ، FALAHATGAR SAYED REZA, "The Simplified Unit Cell Method for Micromechanical Studies of Viscoelastic Properties of Unidirectional Fibre-Reinforced Composites,", Sep 2006.

MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD ، ALIBEIKLOU AKBAR ، AMERI EHSAN, "Stacking sequence optimization for laminated cylindrical panels using the globalized nelder- mead method,", Sep 2006.

SHAKERI MAHMOUD ، AMERI EHSAN ، MOHAMMADI AGHDAM MOHAMMAD, "Stacking sequence optimization of laminated cylindrical panels using Globalized Nelder-Mead method,", CST 2006, Apr 2006.

MOHAMMADI AGHDAM MOHAMMAD, "an extension to the simplified unit cell model for analysis of fiber reinproced composites,", Mar 2005.

MOHAMMADI AGHDAM MOHAMMAD ، NADERAN TAHAN HAMID, "BENDING ANALYSIS OF SHEAR DEFORMABLE SECTOR PLATES USING THE EXTENDED KANTOROVICH METHOD,", INTERNATIONAL CONFERENCE ON MODELING, SIMULATION AND APPLIED OPTIMIZATION, Feb 2005.

MOHAMMADI AGHDAM MOHAMMAD, "Bending analysis of shear deformable sector plates using the Extended kantorovich method,", Jan 2005.

MOHAMMADI AGHDAM MOHAMMAD, "Micromechanics based analysis of randomly distributed fiber reinforced composites using simplified unit cell model,", Jan 2005.

MOHAMMADI AGHDAM MOHAMMAD ، FALAHATGAR SAYED REZA, "Effect of Manufacturing process thermal residual stress and interface in mechanical behavior of Metal Matrix Composites,", Dec 2004.

MOHAMMADI AGHDAM MOHAMMAD, "Application of the extended kantorovich method to bending analysis of sector plates,", Nov 2004.

MOHAMMADI AGHDAM MOHAMMAD, "Bending analysis of thick rectangular plates with various boundary conditions using extended kantorovich method,", Nov 2004.

MOHAMMADI AGHDAM MOHAMMAD ، FALAHATGAR SAYED REZA, "Micromechanical Modeling of Interface Damage of Metal Matrix Composites Subjected to combined axial and transverse Loading,", Apr 2004.

MOHAMMADI AGHDAM MOHAMMAD ، FALAHATGAR SAYED REZA, "Micromechanical modeling:of interface damage in transverse loading,", Dec 2003.

MOHAMMADI AGHDAM MOHAMMAD ، KAMALIKHAH AHMAD, "Micromechanical analysis of:layered systems subjected to bending-effects of thermal residnd stresses,", Dec 2003.

JAMAL-ALDIN JAMALI ، MOHAMMADI AGHDAM MOHAMMAD, "Micromechauics of off-axis loading of composite Materials using sioplified unit cell model,", May 2003.

MOHAMMADI AGHDAM MOHAMMAD ، FALAHATGAR SAYED REZA, "Bending analysis of thick laminated plates using Extended kantorovich Method,", Jan 2003.

MOHAMMADI AGHDAM MOHAMMAD ، KHUGEH AMANOLLAH, "More on the effects of thermas residual stress on yielding behavior of composite materials,", Jan 2003.

100

MOHAMMADI AGHDAM MOHAMMAD, "STRES INTCRACTIONS IN UNIDIRCCTIONAL FIBER REINFORCCD COMPOSITES SUBJECTED TO OFF AXIS,", Jun 2001.

101

MOHAMMADI AGHDAM MOHAMMAD, "A Simplified Unit Cell Model for Unidirectional Fibre Reinforced Composites,", May 2001.

102

MOHAMMADI AGHDAM MOHAMMAD, "Micromechanical Modeling of Metal Matrix Composites Subjected To Combined Therimal And Shear Loading,", Mar 1998.

103

MOHAMMADI AGHDAM MOHAMMAD ، SHAKERI MAHMOUD, "Bending of Orthotroic plates with shear deformation,", Mar 1992.

دروس ارائه شده

عنوان درس

توصیف درس

سرفصل ها

دوره درسی

Advanced Numerical Methods

4032

Statics

4032

Strength of Materials (II)

4032

Advanced Numerical Methods

4031

Finite Element Method

4031

Strength of Materials (II)

4022

Statics

4022

Strength of Materials (II)

4021

Advanced Numerical Methods

4021

Strength of Materials (I)

4021