محمد محمدی اقدم - دانشگاه صنعتی امیرکبیر

Mechanical behavior of functionally graded porous materials with nano additives under static pressure and compression loadings using experimental and numerical methods

محمدحسین کاظم عباس الجابری
استاد راهنمای دیگر: طه گودرزی

مهر 1403

پایش آسیب خستگی در میله های فولادی با استفاده از مبدلهای پیزوالکتریک و ویژگی های امواج لمب

حمید صالحی و مهناز عبدا...شمشیرساز
استاد راهنمای دیگر:

مهر 1401

ارائه مدل ساختاری برای پیش بینی رفتار ساقه مغز در اثر آسیب های مکانیکی

فائزه اسکندری و مهدی شفیعیان
استاد راهنمای دیگر:

اسفند 1399

تحلیل رفتار صفحات کامپوزیت حاوی الیاف خمیده تحت بار متحرک با استفاده از تئوری الاستیسیته سه بعدی و منحنی های نربز

یاسین حیدرپور

آذر 1395

بررسی چند مقیاسی رفتار فوم های فلزی سلول باز تحت بارگذاری های ایستایی و خستگی پرچرخه

رضا هدایتی و مجتبی صدیقی
استاد راهنمای دیگر:

تیر 1395

رفتار کمانش و پس کمانش نانو پوسته های استوانه ای با در نظر گرفتن اثر تنش سطحی تحت بار محوری به همراه شبیه سازی دینامیک مولکولی

سعید سهمانی و محسن بهرامی
استاد راهنمای دیگر:

اسفند 1394

تحلیل استاتیکی و دینامیکی ورق مستطیل با نوارهایی از آلیاژ حافظه دار

مهدی بداغی و محمود شاکری
استاد راهنمای دیگر:

اردیبهشت 1394

تحلیل رفتار ترمومکانیکی مواد و سازه های تقویت شده با الیاف حافظه دار با استاده از مدل میکرومکانیک

علیرضا دامن پاک مقدم
استاد راهنمای دیگر: محمود شاکری

اردیبهشت 1394

توسعه روش دیفرانسیل کوادریچر المانی (DQEM ) به تحلیل مایکرومکانیک مواد مرکب تحت بارهای ترمومکانیکی

محمد بیات

خرداد 1391

بررسی مایکرومکانیک شروع وگسترش خرابی موادمرکب زمینه فلزی تحت بار ترمومکانیکی با استفاده از روش بدون المان

عیسی احمدی

دی 1389

تحلیل مکانیزمهای خرابی در مواد مرکب پایه فلزی با استفاده از تعمیم روش سلول واحد

محمدجواد محمودی
استاد راهنمای دیگر: محمود شاکری

دی 1388

پایان‌نامه‌های کارشناسی ارشد

عنوان پایان‌نامه

توسط

تاریخ دفاع

بررسی ریزساختاری رفتارمکانیکی مغز در برابر بارگذاری ضربه

هانیه بادی پا و مجتبی صدیقی
استاد راهنمای دیگر:

شهریور 1404

کاربرد روش بزیر در تحلیل رفتارهای استاتیکی و ارتعاشات درون صفحه ای ورق های مستطیلی دارای ترک بر اساس نظریه پری داینامیک

فرزین گل احضار ثابت

شهریور 1404

تحلیل غیرخطی خمش صفحه ی متخلخل با ساختار مواد طبقه بندی شده روی پایه الاستیک با استفاده از روش عددی شبکه های عصبی فیزیک آگاه

ارین صفاخواه
استاد راهنمای دیگر: منوچهر صالحی

شهریور 1404

شبکه عصبی فیزیک آگاه برای تحلیل ارتعاشات آزاد پنل های استوانه ای ارتوتروپیک

سما بیات

مرداد 1404

تحلیل خمش وابسته به زمان ورق های مستطیلی ویسکوالاستیک با مشتق کسری

طاها اصفهانی

تیر 1404

تحلیل خمش غیر خطی نانو تیرها با استفاده از شبکه های عصبی فیزیک آگاه

صبا سادات میرصادقی اصفهانی

اسفند 1403

حل عددی مساله پوسته دو انحنائی ساندویچی با هسته آگزتیک با استفاده از اپراتور دیفرانسیل پری دینامیک

شایان الیاسی

مهر 1403

تحلیل میدان دمایی حاصل از فرآیند جوشکاری قوسی با گاز محافظ با استفاده از روش های یادگیری ماشین

محمدرضا غلامی

شهریور 1403

بررسی مقایسه ای رفتار مکانیکی ساختار های پنتامود مانند تحت بار استاتیکی

تینا نوری تبار و مجتبی صدیقی
استاد راهنمای دیگر:

شهریور 1403

شبیه سازی دینامیکی ربات های موبایل چرخ دار: یک مطالعه مقایسه ای روش های عددی چند مرحله ای

علیرضا ابراهیمی و علی عظیمی
استاد راهنمای دیگر:

مرداد 1403

تحلیل ضربات تگرگ روی چندلایه های کامپوزیتی و ساندویچی

محمد حقگو و مجتبی صدیقی
استاد راهنمای دیگر:

اردیبهشت 1403

آنالیز ساختار فرامواد انعطاف پذیر تحت تاثیر نیروی هارمونیک

نوید ربیعی دستجردی
استاد راهنمای دیگر: مریم قصاب زاده

اسفند 1402

تحلیل خمش ورق های متوازی الاضلاع کامپوزیتی مشبک با استفاده از روش کانتروویچ توسعه یافته

محمد حقیقی

مهر 1402

تحلیل ارتعاشات برهم کنش پوسته مخروطی سه لایه با هسته آگزتیک با جریان سیال تراکم ناپذیر

نادیا چنارانی

شهریور 1402

تحلیل خواص ویسکوالاستیک زیست مواد با استفاده از سلول های واحد الهام گرفته از مواد زیستی

محمد شکرنیا و مجتبی صدیقی
استاد راهنمای دیگر:

مرداد 1402

مطالعه رفتار سازه های متخلخل آگزتیک تحت بارهای ترمومکانیکی

عرفان عیوض حصاری
استاد راهنمای دیگر: مجتبی صدیقی

اردیبهشت 1402

توسعه یک روش مبتنی بر سرد کردن در حین جوشکاری جهت کاهش تنش پسماند در آلومینیوم 6061T6

حامد همت پور و ایرج ستاری فر
استاد راهنمای دیگر:

اسفند 1401

روش های شبیه سازی مشترک: بهبود ثبات عددی و رفتار همگرایی

رضا نوپورهولاری
استاد راهنمای دیگر: افشین تقوائی پور

اسفند 1401

تحلیل رفتار ترمو الاستیک سازه های متخلخل و سلولی تحت بارگذاری حرارتی-مکانیکی

فاطمه عابدینی
استاد راهنمای دیگر: مجتبی صدیقی

مهر 1401

تحلیل رفتار خمشی صفحات کامپوزیت لایه ای با الیاف خمیده حاوی سوراخ تحت بارگذاری استاتیکی

رسول محمدی

شهریور 1401

مدلسازی رفتار ترمومکانیکی کامپوزیت ذره ای از جنس آلیاژ حافظه دار در زمینه فلزی با استفاده از روشهای میکرومکانیکی تحت بارگذاری استاتیکی

سیدنوید منصوری و مجتبی صدیقی
استاد راهنمای دیگر:

خرداد 1401

بررسی رفتار ترمومکانیکی مواد متخلخل منظم تحت بارگذاری چند محوره

علی کوچکی

مهر 1400

شبیه سازی دینامیک مولکولی و ساخت نانوکامپوزیت مغناطیسی آلژینات-پلی پیرول-هیدروکسی آپاتیت با کاربرد جایگزین استخوان

هادی کبیر و سعید صابرسمندری
استاد راهنمای دیگر:

شهریور 1400

تحلیل تجربی و عددی داربست های نانوکامپوزیتی مغناطیسی زیست سازگار

علی خالوندی
استاد راهنمای دیگر: سعید صابرسمندری

شهریور 1400

بررسی رفتار ویسکوالاستیک زیست مواد متخلخل

سیدمحسن حسینی
استاد راهنمای دیگر: مجتبی صدیقی

فروردین 1400

تعیین حد تسلیم ماده متخلخل با استفاده از یک روش ماکرو-میکرو مکانیکی

غزل السادات شریعت پناهی و مجتبی صدیقی
استاد راهنمای دیگر:

آذر 1399

ساخت، مشخصه یابی و شبیه سازی بیوکامپوزیت پلی متیل متااکریلات - هیدروکسی آپاتیت تقویت شده با نانوذرات گرافن جهت کاربرد در مهندسی پزشکی

عارف بابکی
استاد راهنمای دیگر: مجتبی صدیقی

شهریور 1399

تحلیل رفتار افزودنی الاستین بر خواص بیومکانیکی نانوکامپوزیت هیدروکسی آپاتیت/ پلی متیل متااکریلات در مهندسی بافت استخوان تحت ضربه سرعت پایین

متین محمدزاده راد و مجتبی صدیقی
استاد راهنمای دیگر:

شهریور 1399

تشخیص سرطان پروستات با استفاده از تصاویر التراسونیک به روش بازسازی غیرمستقیم

سیدشهاب الدین اسحاقی نیا و افشین تقوائی پور
استاد راهنمای دیگر:

بهمن 1398

اثر افزودن نانوذرات مغناطیسی بر خواص مکانیکی کامپوزیت هیدروکسی آپاتیت/پلی متیل متااکریلات مورد استفاده در بافت استخوان

فریدالدین موذنی
استاد راهنمای دیگر: سعید صابرسمندری

بهمن 1398

مطالعه تئوری و تجربی خواص مکانیکی کامپوزیت های پلیمری تقویت شده با نانوورق های گرافن

محسن معینی
استاد راهنمای دیگر: سعید صابرسمندری

بهمن 1397

تحلیل تجربی و عددی رفتار خمشی ورق کامپوزیتی با تقویت کننده نانو لوله های کربنی دو جداره

محمودرضا دهنوی
استاد راهنمای دیگر: سعید صابرسمندری

بهمن 1397

تحلیل وابسته به اندازه ارتعاشات اجباری نانولوله های کربنی انتقال دهنده سیال

محمد معبودی
استاد راهنمای دیگر: مجتبی صدیقی

بهمن 1397

بررسی ناپایداری پوسته مخروطی FG-CNTRC ناشی از کنش و واکنش جامد و سیال

نرگس محمدی

مهر 1397

مدلسازی میکرومکانیکی متامتریال با ساختار میورا اوری

حسین سلیمانی
استاد راهنمای دیگر: طه گودرزی

تیر 1397

مدلسازی ریزمقیاسی رفتار مکانیکی استخوان با بهره گیری از تصاویر سی تی اسکن

نعیم قویدل نیا و مجتبی صدیقی
استاد راهنمای دیگر:

بهمن 1396

بررسی تحلیلی و تجربی خواص مکانیکی فوم های سلول باز تحت بارگذاری استاتیکی

ابوالفضل صالحی و مجتبی صدیقی
استاد راهنمای دیگر:

دی 1396

ارتعاشات آزاد غیر خطی نانو پوسته های استوانه ای شکل

علی سرافراز

مهر 1396

تحلیل رفتار مکانیکی مواد چند جنسی با استفاده از روش المان محدود توسعه یافته

سیدمحمدجواد میرباقری

بهمن 1395

بررسی میکرو مکانیکی اثر لایه واسط با خواص تابعی در رفتار مکانیکی کامپوزیتهای الیافی

محسن یارمحمدی و منوچهر صالحی
استاد راهنمای دیگر:

دی 1394

بررسی عددی و تجربی رفتار مکانیکی فوم فلزی سلول بسته تحت بارگذاری ضربه

مهرداد کلوشانی و مجتبی صدیقی
استاد راهنمای دیگر:

مهر 1394

مدل سازی و تحلیل تنش ورق فولادی وکامپوزیتی تحت بارهای ناشی از موج شوک زیرآب

حامد جعفری
استاد راهنمای دیگر: محسن رضائیان اکبرزاده

مهر 1394

تحلیل اعوجاج هندسی در پانلهای چندلایه فلز-الیاف در فرایند پخت

محمد هدایتی نژاد و مجتبی صدیقی
استاد راهنمای دیگر:

شهریور 1394

تحلیل تئوری و تجربی قانون نفوذ سنبه کروی در ورق های ساندویچی با هسته نرم

حسین روان بخش حبیب آبادی و مجتبی صدیقی
استاد راهنمای دیگر:

بهمن 1393

بررسی ارتعاشات نانو تیر ساخته شده از مواد هدفمند

حامد نیکنام جهرمی

مهر 1393

مدل سازی مایکرومکانیکی خرابی لایه میانی الیاف و زمینه درمواد مرکب فلزی تحت بارگذاری خارج از محور

سیدمحمدامین حسینی
استاد راهنمای دیگر: مجتبی صدیقی

مهر 1393

بررسی میکرومکانیکی ماده مرکب فلزی تک جهته در دما های بالا

حمید توفیقی اصل

بهمن 1392

آنالیز میکرومکانیکی مواد مرکب خود ترمیم شونده

سیده زهرا ایمن

آبان 1392

تحلیل کمانش پانل استوانه ای با لایه های پیزو

ارین صارمی مقدم

آبان 1392

مدل سازی میکرومکانیکی رفتار مواد مرکب حاوی فایبرهای پیزوالکتریک

مهدی عین بیگی

آبان 1392

تحلیل پایداری ورقهای کامپوزیتی متقارن ومتعامد با جدایی لایه ای در عرض

محمدمصطفی باروتی
استاد راهنمای دیگر: حمیدرضا اویسی

مهر 1392

تحلیل کمانش پانل های استوانه ای به روش کانترویچ توسعه یافته ( EKM )

بهروز نظری

شهریور 1392

تحلیل خمشی قطاع دایروی شکل ضخیم ساخته شده از مواد هدفمند تحت بار موضعی با استفاده از روش کانترویچ توسعه یافته.

محمدحسن سبحانی

آبان 1391

مدلسازی و تحلیل ارتعاشات ورق کامپوزیتی ویسکوالاستیک با استفاده از اطلاعات تستهای زمانمند

حسام الدین زمانی و مهدی سعید کیاست
استاد راهنمای دیگر:

آبان 1391

مدلسازی المان محدود پدیده بیرون کشیدن الیاف در مواد مرکب تک جهته

الیاس عبداللهی

مهر 1391

ارائه ی مدل مایکرومکانیک سه بعدی برای شروع و گسترش خرابی لایه ی میانی در مواد مرکب ذره ای پایه فلزی

میلاد شهباز

بهمن 1390

بررسی مایکرومکانیکی خرابی لایه مشترک زمینه و رشته در مواد مرکب تک جهته با خواص ویسکوالاستیک

سیدرضا مرسلی

بهمن 1390

حل معادلات پوسته های عمومی کامپوزیت توسط روش کانترویچ توسعه یافته

کسری بیگدلی

آذر 1388

تحلیل خمشی پوسته های باز مخروطی (FG) با استفاده از روش توسعه یافته کانترویچ

نسترن شاه منصوری

آذر 1388

تحلیل پانل های استوانه ای ازمواد هدفمند تحت بار استاتیکی خمشی به روش GDQ

ستار مالکی

شهریور 1387

تحلیل غیر خطی استاتیکی ورق قطاعی ضخیم به روش GDQ

عطیه اندخشیده

شهریور 1387

تحلیل تجربی و المان محدود پوسته مخروطی جدار نازک کامپوزیتی تحت اثر بارگذاری ترکیبی محوری و خمشی

سجاد شقاقی و مجتبی صدیقی
استاد راهنمای دیگر:

شهریور 1387

تحلیل تنش ترمومکانیکی و تخمین عمر سرسیلندر موتور دیزل سنگین

حمیدرضا چمنی
استاد راهنمای دیگر: ایرج ستاری فر

اردیبهشت 1387

طراحی و بهینه سازی شبکه مبدلهای حرارتی بااستفاده از الگوریتم ژنتیک

محمد فسنقری و ابراهیم دامنگیر
استاد راهنمای دیگر:

اردیبهشت 1386

تحلیل استاتیکی ورق ضخیم باشکل نامنظم، بارگذاری موضعی و شرایط مرزی ترکیبی توسط روش GDQEM

سعید فاضلی

آذر 1385

مدل المان محدود شرع خرابی در لایه میانی فایبروماتریس در مواد مرکب فلزی تحت بارگذاری مرکب

میثم گرجی بندپی
استاد راهنمای دیگر: حمیدرضا داغیانی

آذر 1385

کاربرد روش کانترویچ توسعه یافته (EKM) در تحلیل خمش پانلهای استوانه ای

فربد علیجانی

آبان 1385

استفاده از روش کانترویچ توسعه یافته (EKM) در حل خمش ورق های قطاعی

مسعود محمدی

آبان 1385

تحلیل خمشی پانلهای مخروطی ارتوتروپیک بااستفاده از روش GDQ

مهدی دشتی خویدکی
استاد راهنمای دیگر: شهریار فریبرز

اسفند 1384

چیدمان مناسب لایه های پانل چندلایه برمبنای ارتعاشات آزاد بااستفاده از روش سیمپلکس

احسان عامری و محمود شاکری
استاد راهنمای دیگر:

بهمن 1384

تحلیل تئوری - تجربی لوله های فلزی تحت بار محوری

جلیل پورمحمدی وفا و محمود شاکری
استاد راهنمای دیگر:

بهمن 1384

مدل تحلیلی آرایش اتفاقی فایبرهادر مواد مرکب تک جهته باروش SUM

امیر دژستان

اسفند 1383

استفاده از روشهای بدون المان در تحلیل خمش ورقهای ارتوتروپیک

سیدمحمدرضا علوی طباطبایی

بهمن 1383

کتب

عنوان

نگارندگان/مترجمان

کشور ناشر

تاریخ انتشار

نسخه

Nonlinear Approaches in Engineering Application, Chapter 3: Nonlinear Analysis of Flexible Parallel Mechanisms Through Bzier-Based Integration

رضا نوپورهولاری، محمد محمدی اقدم، افشین تقوائی پور

سوئیس

Nonlinear Approaches in Engineering Application, Chapter 5: Physics-Informed Neural Network for Solution of Nonlinear Differential Equations

علی فلاح، محمد محمدی اقدم

سوئیس

Nonlinear Approaches in Engineering Application, Chapter 10: A Hybrid Numerical Study of the Nonlinear Instability of Nano-switches

محمد بامری، وفا میرزائی، پیمان مرادویسی، محمد محمدی اقدم

سوئیس

Nonlinear Approaches in Engineering Applications, Ch 2: Novel Predictor-Corrector Formulations for Solving Nonlinear Initial Value Problems

وحید احمدی کلخورانی، محمد محمدی اقدم

آلمان

Residual stresses in metal matrix composites

سیدرضا مرسلی، محمد محمدی اقدم

بریتانیا

Nanomaterials for Advanced Biological Applications Size-Dependent Nonlinear Mechanics of Biological Nanoporous Microbeams

سعید سهمانی، محمد محمدی اقدم

آلمان

Nonlinear Approaches in Engineering Applications, Ch 5: Nonlinear Size-Dependent Instability of Hybrid FGM Nanoshells

سعید سهمانی، محمد محمدی اقدم

آمریکا

Nonlinear Approaches in Engineering Applications, Ch 11: A Semi-analytical Solution for Bending of Nonlinear Magnetostrictive Beams

سیدعبدالله شیخ الاسلامی، محمد محمدی اقدم

آمریکا

Nonlinear Approaches in Engineering Applications, Ch 8: Analytical Solutions for Generalized Duffing Equation

محمد محمدی اقدم، علی فلاح

آلمان

Nonlinear Approaches in Engineering Applications, Ch 7: Nonlinear Forced Vibration of Nanobeams

محمد محمدی اقدم، حامد نیکنام جهرمی

آلمان

Nonlinear approaches in Engineering Applications; Ch5: Nonlinear initial value ordinary differential equations

محمد محمدی اقدم، علی فلاح، پوریا حقی

آمریکا

سازه های مکانیکی تیر -ورق و پوسته

محمود شاکری، اکبر علی بیکلو، محمد محمدی اقدم

ایران

مقالات مجلات

S.S. Mirsadeghi Esfahani, Ali Fallah, M. Mohammadi Aghdam, "Physics-Informed Neural Network for Nonlinear Bending Analysis of Nano-Beams: A Systematic Hyperparameter Optimization", Mathematical and Computational Applications, vol. 30, no. 4, pp.1-21, 2025.

V. Mirzaei, M. Bameri, P. Moradweysi, M. Mohammadi Aghdam, "A Robust Hybrid Solution for Pull-in Instability of FG Nano Electro-Mechanical Switches Based on surface Elasticity Theory", Cmes-Computer Modeling In Engineering and Sciences, vol. 143, no. 3, pp.2811-2832, 2025.

M. Haghgoo, M. Sadighi, M. Mohammadi Aghdam, "Repeated and multiple hail impacts on honeycomb sandwich panels: An experimental and numerical study", Composite Structures, vol. 360, no. 3, pp.1-23, 2025.

R. Nopour Hollari, Ali Fallah, M. Mohammadi Aghdam, "Large deflection analysis of functionally graded reinforced sandwich beams with auxetic core using physics-informed neural network", Mechanics Based Design of Structures and Machines, vol. 0, no. 0, pp.1-25, 2025.

S.S. Mirsadeghi Esfahani, Ali Fallah, M. Mohammadi Aghdam, "Physics-informed neural network for bending analysis of two dimensional functionally graded nano-beams based on nonlocal strain gradient theory", Journal of Applied and Computational Mechanics, vol. 56, no. 1, pp.222-248, 2025.

M. Shokrnia, M. Alavi, M. Sadighi, M. Mohammadi Aghdam, "Viscoelastic Behavior of Cellular Biomaterials Based on Octet-Truss and Tetrahedron Topologies", Materials, vol. 17, no. 23, pp.1-36, 2024.

P. Moradweysi, T. Goudarzi, M. Mohammadi Aghdam, "Modeling of large periodic origami structures to analyze local vibration", International Journal of Mechanical Sciences, vol. 0, no. 0, pp.1-19, 2024.

M.H. Aljaberi, M. Mohammadi Aghdam, T. Goudarzi, Muhannad Al-waily, "Compressive Behavior of Novel Additively Manufactured Ti-6Al-4V Lattice Structures: Experimental and Numerical Studies", ..Materials, vol. 17, no. 15, pp.1-20, 2024.

Reza Hedayati, E. Eyvaz Hesari, M. Mohammadi Aghdam, M. Sadighi, "Thermomechanical behavior of auxetic lattices", Journal of Thermal Stresses, vol. 47, no. 8, pp.1073-1094, 2024.

A. Khalvandi, S. Saber Samandari, M. Mohammadi Aghdam, "A supervised learning-assisted multi-scale study for thermal and mechanical behavior of porous silica", Heliyon, vol. 10, no. 1, pp.28995-28995, 2024.

M.m. Mobasheri Zafarabadi, M. Mohammadi Aghdam, Aurelio L. Araujo, "Buckling and free vibration of grid-stiffened composite conical panels using Extended Kantorovich Method", Thin-Walled Structures, vol. 0, no. 0, pp.1-10, 2024.

A. Salmanizadeh Hassanabadi, R. Nopour Hollari, M. Mohammadi Aghdam, Yaser Kiani, M.R. Eslami, "On the free vibration characteristics of multiscale hybrid conical panels utilizing Chebyshev-Ritz route", Mechanics Based Design of Structures and Machines, vol. 0, no. 0, pp.1-20, 2024.

H. Kabir, M. Mohammadi Aghdam, S. Saber Samandari, M. Moeini, "A molecular dynamics study on the size effects of Fe3O4 nanoparticles on the mechanical characteristics of polypyrrole/Fe3O4 nanocomposite", Molecular Simulation, vol. 0, no. 0, pp.1-13, 2024.

P. Moradweysi, P. M. Santucci, Georgio Carta, T. Goudarzi, M. Mohammadi Aghdam, A. Baldi, M. Brun, "Design and analysis of a thick Miura-ori folded structure with large negative Poissons ratio", Mechanics of Advanced Materials and Structures, vol. 29, no. 25, pp.1-19, 2024.

S.S. Eshaghinia, A. Taghvaeipour, M. Mohammadi Aghdam, Hassan Rivaz, "On the soft tissue ultrasound elastography using FEM based inversion approach", Proceedings of The Institution of Mechanical Engineers Part H-Journal of Engineering In Medicine, vol. 0, no. 0, pp.1-17, 2024.

M. Khoshnazar, M. Dastranj, A. Azimi, M. Mohammadi Aghdam, Paulo Flores, "Application of the Bezier integration technique with enhanced stability in forward dynamics of constrained multibody systems with Baumgarte stabilization method", Engineering With Computers, vol. 0, no. 0, pp.1-15, 2023.

R. Nopour Hollari, A. Taghvaeipour, M. Mohammadi Aghdam, Francisco Gonzalez, "On the generalized Bzier-based integration approach for co-simulation applications", Mechanics Based Design of Structures and Machines, vol. 0, no. 0, , 2023.

F. Abedini, Reza Hedayati, M. Mohammadi Aghdam, M. Sadighi, "Thermomechanical behavior of lattice structures: An analytical, numerical, and experimental study", Mechanics Based Design of Structures and Machines, vol. 51, no. 5, pp.1-24, 2023.

M. Alinia, R. Nopour Hollari, M. Mohammadi Aghdam, Reza Hedayati, "The effect of auxeticity on the vibration of conical sandwich shells with ring support under various boundary conditions", Engineering Analysis With Boundary Elements, vol. 152, no. 0, pp.130-147, 2023.

Ali Fallah, M. Mohammadi Aghdam, "Physics-informed neural network for bending and free vibration analysis of three-dimensional functionally graded porous beam resting on elastic foundation", Engineering With Computers, vol. 0, no. 0, pp.1-18, 2023.

H. Zamani, S. Nourazar Khoshknab, M. Mohammadi Aghdam, "Large-amplitude vibration and buckling analysis of foam beams on nonlinear elastic foundations", Mechanics of Time-Dependent Materials, vol. 0, no. 0, pp.1-18, 2022.

F. Eskandari, M. Shafieian, M. Mohammadi Aghdam, Kaveh Laksari, "Morphological changes in glial cells arrangement under mechanical loading: A quantitative study", Injury-International Journal of The Care of The Injured, vol. 53, no. 11, pp.3617-3623, 2022.

Sahmani, S. Saber Samandari, M. Mohammadi Aghdam, Khandan, "Microstructural properties of novel nanocomposite material based on hydroxyapatite and carbon nanotubes: fabrication and nonlinear instability simulation", Journal of Nanostructure In Chemistry, vol. 12, no. 1, pp.1-22, 2022.

A. Khalvandi, M. Mohammadi Aghdam, S. Saber Samandari, "Fabrication, experimental study and 2-D finite element computational homogenization of bone scaffolds under uniaxial and biaxial compressive loadings??????", Proceedings of The Institution of Mechanical Engineers Part N-Journal of Nanomaterials Nanoengineering and Nanosystems, vol. 20, no. 1, pp.1-22, 2022.

A. Khalvandi, S. Saber Samandari, M. Mohammadi Aghdam, "Application of artificial neural networks to predict Youngs moduli of cartilage scaffolds: An in-vitro and micromechanical studyf", Biomaterials Advances, vol. 136, no. 1, pp.1-17, 2022.

Reza Hedayati, Yahya Sheikhnejad, M. Mohammadi Aghdam, "Editorial to the Special Issue on Advanced Micro/Nanoscale Porous Materials for Novel Applications: Answering to Future Needs", Transport In Porous Media, vol. 142, no. 0, pp.1-4, 2022.

R. Nopour Hollari, Farzad Ebrahimi, Ali Dabbagh, M. Mohammadi Aghdam, "Nonlinear forced vibrations of three?phase nanocomposite shells considering matrix rheological behavior and nano?fber waviness", Engineering With Computers, vol. 0, no. 0, pp.1-18, 2022.

Lazreg Hadhi, Ali Fallah, M. Mohammadi Aghdam, "Influence of the distribution pattern of porosity on the free vibration of functionally graded plates", Structural Engineering and Mechanics, vol. 82, no. 2, pp.151-161, 2022.

Hossein Kabir, M. Mohammadi Aghdam, "A generalized 2D Bzier-based solution for stress analysis of notched epoxy resin plates reinforced with graphene nanoplatelets", Thin-Walled Structures, vol. 169, no. 0, pp.1-6, 2021.

M.M. Mobasheri Zafarabadi, M. Mohammadi Aghdam, "Semi-analytical solutions for buckling and free vibration of composite anisogrid lattice cylindrical panels", Composite Structures, vol. 275, no. 0, pp.1-11, 2021.

H. Salehi, M. Shamshirsaz, M. Mohammadi Aghdam, "Investigation on modulation of multi-frequency ultrasonic waves in structures with quadratic nonlinearity", Smart Structures and Systems, vol. 28, no. 1, pp.43-53, 2021.

A. Seyfi, M. Mohammadi Aghdam, "Vibrational behavior of temperature-dependent imperfect functionally graded plate lying on an elastic substrate", Mechanics Based Design of Structures and Machines, vol. 0, no. 0, , 2021.

Sahmani, Khandan, S. Saber Samandari, Esmaeili, M. Mohammadi Aghdam, "Fabrication and resonance simulation of 3D-printed biocomposite mesoporous implants with different periodic cellular topologies", Bioprinting, vol. 22, no. 1, pp.138-138, 2021.

Hooman Danesh, Mahdi Javanbakht, M. Mohammadi Aghdam, "A comparative study of 1D nonlocal integral Timoshenko beam and 2D nonlocal integral elasticity theories for bending of nanoscale", Continuum Mechanics and Thermodynamics, vol. 0, no. 0, , 2021.

H. Soleimani, T. Goudarzi, M. Mohammadi Aghdam, "Advanced structural modeling of a fold in Origami/Kirigami inspired structures", Thin-Walled Structures, vol. 161, no. 0, pp.1-22, 2021.

M. Mohammadzadeh, S. Saber Samandari, M. Sadighi, Tayebi, M. Mohammadi Aghdam, "Macro-and micromechanical modelling of HA-Elastin scaffold fabricated using freeze drying technique", Journal of Nanoanalysis, vol. 8, no. 1, pp.1-15, 2021.

F. Eskandari, M. Shafieian, M. Mohammadi Aghdam, Kaveh Laksari, "Mind the gap: A mechanobiological hypothesis for the role of gap junctions in the mechanical properties of injured brain tissue", Journal of The Mechanical Behavior of Biomedical Materials, vol. 115, no. 1, pp.1-6, 2020.

F. Eskandari, M. Shafieian, M. Mohammadi Aghdam, Kaveh Laksari, "The Importance of Axonal Directions in the Brainstem Injury during Neurosurgical Interventions", Injury-International Journal of The Care of The Injured, vol. 51, no. 10, pp.1-10, 2020.

F. Eskandari, M. Shafieian, M. Mohammadi Aghdam, Kaveh Laksari, "Structural Anisotropy vs. Mechanical Anisotropy: The Contribution of Axonal Fibers to the Material Properties of Brain White Matter", Annals of Biomedical Engineering, vol. 48, no. 10, pp.1-9, 2020.

F. Eskandari, M. Shafieian, M. Mohammadi Aghdam, Kaveh Laksari, "Tension Strain-Softening and Compression Strain-Stiffening Behavior of Brain White Matter", Annals of Biomedical Engineering, vol. 48, no. 0, , 2020.

M. Moeini, R. Barbazesfahani, S. Saber Samandari, M. Mohammadi Aghdam, "Molecular dynamics simulations of the effect of temperature and strain rate on mechanical properties of graphene-epoxy nanocomposites", Molecular Simulation, vol. 46, no. 6, pp.476-486, 2020.

Saeed Sahmani, , S. Saber Samandari, M. Mohammadi Aghdam, "Effect of magnetite nanoparticles on the biological and mechanical properties of hydroxyapatite porous scaffolds coated with ibuprofen drug", Materials Science and Engineering C-Materials For Biological Applications, vol. 111, no. 1, pp.110835-110835, 2020.

F. Eskandari, M. Shafieian, M. Mohammadi Aghdam, Kaveh Laksari, "A knowledge map analysis of brain biomechanics: Current evidence and future directions", Clinical Biomechanics, vol. 75, no. 0, , 2020.

N. Ghavidelnia, Reza Hedayati, M. Sadighi, M. Mohammadi Aghdam, "Development of porous implants with non-uniform mechanical properties distribution based on CT images", Applied Mathematical Modelling, vol. 83, no. 0, pp.801-823, 2020.

Saeed Nouri, Saeid Sahmani, M. Asayesh, M. Mohammadi Aghdam, "Microstructural characterization of YSZ-CoNiCrAlY two-layered thermal barrier coating formed on ?-TiAl intermetallic alloy via APS process", Intermetallics, vol. 118, no. 0, pp.1-6, 2020.

Alireza Adli, Karim Shalesh-nezhad, Mohammad Reza Khoshravan Azar, M. Mohammadi Aghdam, "The effect of vascular self-healing pattern on mechanical behavior and healing performance of epoxy/glass composite", Plastics Rubber and Composites, vol. 49, no. 2, pp.79-90, 2019.

Saeed Nouri, Saeid Sahmani, M. Asayesh, M. Mohammadi Aghdam, "Improvement of high-temperature oxidation resistance of ?-TiAl intermetallic alloy by YSZ-NiCoCrAlY coating using APS process", Materials Research Express, vol. 6, no. 12, pp.1-8, 2019.

Samaneh Saber-samandari, M. Mohammadi Aghdam, S. Saber Samandari, "A novel magnetic bifunctional nanocomposite scaffold for photothermal therapy and tissue engineering", International Journal of Biological Macromolecules, vol. 138, no. 1, pp.810-818, 2019.

Saeid Sahmani, A. Khandan, E. Esmaeili, S. Saber Samandari, M.ghadiri Nejad, M. Mohammadi Aghdam, "Calcium phosphate-PLA scaffolds fabricated by fusion deposition modelling technique for bone tissue applications: Fabrication, characterization and simulation", Ceramics International, vol. 46, no. 0, pp.2447-2456, 2019.

Saeed Nouri, Saeid Sahmani, M. Asayesh, M. Mohammadi Aghdam, "Study on the oxidation resistance of ?-TiAl intermetallic alloy coated via different diffusion coating processes", Materials Research Express, vol. 6, no. 10, pp.1-12, 2019.

Saeid Sahmani, M. Mohammadi Aghdam, "Nonlocal electrothermomechanical instability of temperature-dependent FGM nanopanels with piezoelectric facesheets", Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, vol. 43, no. 0, pp.579-593, 2019.

N. Mohammadi, H. Asadi, M. Mohammadi Aghdam, "An efficient solver for fully coupled solution of interaction between incompressible fluid flow and nanocomposite truncated conical shells", Computer Methods In Applied Mechanics and Engineering, vol. 351, no. 0, pp.478-500, 2019.

Yasin Heydarpour, M. Mohammadi Aghdam, "A new multi-step technique based on the non-uniform rational basis spline curves for non-linear transient heat transfer analysis of functionally graded truncated cone", Heat Transfer Engineering, vol. 40, no. 7, pp.588-603, 2019.

Saeed Sahmani, S. Saber Samandari, Amirsalar Khandan, M. Mohammadi Aghdam, "Influence of MgO nanoparticles on the mechanical properties of coated hydroxyapatite nanocomposite scaffolds produced via space holder technique: Fabrication, characterization and simulation", Journal of The Mechanical Behavior of Biomedical Materials, vol. 95, no. 0, pp.76-88, 2019.

Saeid Sahmani, Mohammad Fotouhi, M. Mohammadi Aghdam, "Size-dependent nonlinear secondary resonance of micro-/nano-beams made of nano-porous biomaterials including truncated cube cells", Acta Mechanica, vol. 230, no. 3, pp.1077-1103, 2019.

Hossein Kabir, M. Mohammadi Aghdam, "A robust Bzier based solution for nonlinear vibration and post-buckling of random checkerboard graphene nano-platelets reinforced composite beams", Composite Structures, vol. 212, no. 0, pp.184-198, 2019.

Saeed Sahmani, Shahali, Ghadirinejad, Amirsalar Khandan, M. Mohammadi Aghdam, S. Saber Samandari, "Effect of copper oxide nanoparticles on electrical conductivity and cell viability of calcium phosphate scaffolds with improved mechanical strength for bone tissue engineering", European Physical Journal Plus, vol. 134, no. 0, pp.7-18, 2019.

S. Talebi, M. Sadighi, M. Mohammadi Aghdam, "Numerical and experimental analysis of the closed-cell aluminium foam under low velocity impact using computerized tomography technique", Acta Mechanica Sinica, vol. 34, no. 6, pp.1-12, 2018.

M.m. Keleshteri, Hamed Asadi, M. Mohammadi Aghdam, "Nonlinear bending analysis of FG-CNTRC annular plates with variable thickness on elastic foundation", Thin-Walled Structures, vol. 135, no. 0, pp.453-462, 2018.

A. Ghorbanpour Arani, M. Mohammadi Aghdam, M. J. Saeeidian, "Wave Propagation Analysis of CNT Reinforced Composite Micro-Tube Conveying Viscose Fluid in Visco-Pasternak Foundation Under 2D Multi-Physical Fields", Journal of Solid Mechanics, vol. 10, no. 2, pp.232-248, 2018.

Saeed Sahmani, S. Saber Samandari, M. Mohammadi Aghdam, Amirsalar Khandan, "Nonlinear resonance response of porous beam type implants corresponding to various morphology shapes for bone tissue engineering applications", Journal of Materials Engineering and Performance, vol. 27, no. 10, pp.5370-5383, 2018.

A. Sarafraz, Saeid Sahmani, M. Mohammadi Aghdam, "Nonlinear secondary resonance of nanobeams under subharmonic and superharmonic excitations including surface free energy effects", Applied Mathematical Modelling, vol. 66, no. 0, pp.195-226, 2018.

Saeed Sahmani, S. Saber Samandari, Amirsalar Khandan, M. Mohammadi Aghdam, "Nonlinear resonance investigation of nanoclay based bionanocomposite scaffolds with enhanced properties for bone substitute applications", Journal of Alloys and Compounds, vol. 773, no. 1, pp.636-653, 2018.

R. Hedayati, H. Hosseini Toudeshky, M. Sadighi, M. Mohammadi Aghdam, Amir A Zadpoor, "Multiscale modeling of fatigue crack propagation in additively manufactured porous biomaterials", International Journal of Fatigue, vol. 113, no. 0, pp.416-427, 2018.

Saeed Sahmani, S. Saber Samandari, Mahin Shahali, Hamed Yekta, Aghadavoudi, Montazeran, M. Mohammadi Aghdam, Amirsalar Khandan, "Mechanical and biological performance of axially bionanocomposite sandwich plate-type implant coated by biological polymer loaded novel thin film", Journal of The Mechanical Behavior of Biomedical Materials, vol. 88, no. 1, pp.238-250, 2018.

Saeed Sahmani, Mahin Shahali, Amirsalar Khandan, S. Saber Samandari, M. Mohammadi Aghdam, "Analytical and experimental analyses for mechanical and biological characteristics of novel nanoclay bio-nanocomposite scaffolds fabricated via space holder technique", Applied Clay Science, vol. 165, no. 1, pp.112-123, 2018.

S. Sahmani, Amirsalar Khandan, S. Saber Samandari, M. Mohammadi Aghdam, "Nonlinear bending and instability analysis of bioceramics composed with magnetite nanoparticles: Fabrication, characterization, and simulation", Ceramics International, vol. 44, no. 8, pp.9540-9549, 2018.

S. Sahmani, M. Mohammadi Aghdam, Timon Rabczuk, "Nonlocal strain gradient plate model for nonlinear large-amplitude vibrations of functionally graded porous micro/nano-plates reinforced with GPLs", Composite Structures, vol. 198, no. 0, pp.51-62, 2018.

S. Sahmani, M. Mohammadi Aghdam, Timon Rabczuk, "A unified nonlocal strain gradient plate model for nonlinear axial instability of functionally graded porous micro/nano-plates reinforced with graphene platelets", Materials Research Express, vol. 5, no. 4, pp.45048-45069, 2018.

M. Koloushani, R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, "CT-Based Micro-Mechanical Approach to Predict Response of Closed-Cell Porous Biomaterials to Low-Velocity Impact", Journal of Imaging, vol. 4, no. 3, pp.1-15, 2018.

S. Sahmani, Amirsalar Khandan, S. Saber Samandari, M. Mohammadi Aghdam, "Vibrations of beam-type implants made of 3D printed bredigite-magnetite bio-nanocomposite scaffolds under axial compression: Application, communication and simulation", Ceramics International, vol. 44, no. 10, pp.11282-11291, 2018.

S. Sahmani, M. Mohammadi Aghdam, "Thermo-electro-radial coupling nonlinear instability of piezoelectric shear deformable nanoshells via nonlocal elasticity theory", Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems, vol. 24, no. 2, pp.1333-1346, 2018.

P. Hajikarimi, F. Moghadas Nejad, M. Mohammadi Aghdam, "Implementing General Power Law to Interconvert Linear Viscoelastic Functions of Modified Asphalt Binders", Journal of Transportation Engineering Part B-Pavements, vol. -, no. 0, , 2018.

S. Talebi, M. Sadighi, M. Mohammadi Aghdam, "The effect of impact energy parameters on the closed-cell aluminum foam crushing behavior using X-ray tomography method", Aut Journal of Mechanical Engineering, vol. 2, no. 1, pp.107-116, 2018.

S. Sahmani, M. Mohammadi Aghdam, Timon Rabczuk, "Nonlinear bending of functionally graded porous micro/nano-beams reinforced with graphene platelets based upon nonlocal strain gradient theory", Composite Structures, vol. 186, no. 0, pp.68-78, 2018.

S. Sahmani, M. Mohammadi Aghdam, "Nonlinear instability of hydrostatic pressurized microtubules surrounded by cytoplasm of a living cell including nonlocality and strain gradient microsize dependency", Acta Mechanica, vol. 229, no. 0, pp.403-420, 2018.

S. Sahmani, M. Mohammadi Aghdam, "Nonlocal strain gradient beam model for postbuckling and associated vibrational response of lipid supramolecular protein micro/nano-tubules", Mathematical Biosciences, vol. 295, no. 0, pp.24-35, 2017.

S. Sahmani, M. Mohammadi Aghdam, "Axial postbuckling analysis of multilayer functionally graded composite nanoplates reinforced with GPLs based on nonlocal strain gradient theory", European Physical Journal Plus, vol. 132, no. 11, pp.490-507, 2017.

S. Talebi, M. Sadighi, M. Mohammadi Aghdam, S.M.H. Mirbagheri, "Micro-macro analysis of closed-aluminum foam with crushing behavior subjected to dynamic loadings", Materials Today Communications, vol. 13, no. 13, pp.170-177, 2017.

S. Sahmani, M. Mohammadi Aghdam, "Size-dependent nonlinear bending of micro/nano-beams made of nanoporous biomaterials including a refined truncated cube cell", Physics Letters A, vol. 381, no. 45, pp.3818-3830, 2017.

S. Sahmani, M. Mohammadi Aghdam, "Nonlinear vibrations of pre- and post-buckled lipid supramolecular micro/nano-tubules via nonlocal strain gradient elasticity theory", Journal of Biomechanics, vol. 65, no. 0, pp.49-60, 2017.

Ali Fallah, M. T. Ahmadian, M. Mohammadi Aghdam, "Rate-Dependent Behavior of Connective Tissue through a Micromechanics- Based Hyper Viscoelastic Model", International Journal of Engineering Science, vol. 121, no. 0, pp.91-107, 2017.

S. Sahmani, M. Mohammadi Aghdam, "Nonlocal strain gradient shell model for axial buckling and postbuckling analysis of magneto-electro-elastic composite nanoshells", Composites Part B-Engineering, vol. 132, no. 0, pp.258-274, 2017.

H. Zamani, M. Mohammadi Aghdam, M. Sadighi, "Free vibration analysis of thick viscoelastic composite plates on visco-Pasternak foundation using higher-order theory", Composite Structures, vol. 182, no. 0, pp.25-35, 2017.

S. Sahmani, M. Mohammadi Aghdam, M. Bahrami, "An efficient size-dependent shear deformable shell model and molecular dynamics simulation for axial instability analysis of silicon nanoshells", Journal of Molecular Graphics and Modelling, vol. 77, no. 0, pp.263-279, 2017.

Heydarpour Y., M. Mohammadi Aghdam, "Response of VSCL plates under moving load using a mixed integral-differential quadrature and novel NURBS based multi-step method", Composites Part B-Engineering, vol. 140, no. 0, pp.260-280, 2017.

S. Sahmani, M. Mohammadi Aghdam, "Nonlocal strain gradient beam model for nonlinear vibration of prebuckled and postbuckled multilayer functionally graded GPLRC nanobeams", Composite Structures, vol. 179, no. 0, pp.77-88, 2017.

S. Sahmani, M. Mohammadi Aghdam, "A nonlocal strain gradient hyperbolic shear deformable shell model for radial postbuckling analysis of functionally graded multilayer GPLRC nanoshells", Composite Structures, vol. 178, no. 0, pp.97-109, 2017.

S. Sahmani, M. Mohammadi Aghdam, "Nonlinear instability of axially loaded functionally graded multilayer graphene platelet-reinforced nanoshells based on nonlocal strain gradient elasticity theory", International Journal of Mechanical Sciences, vol. 131-132, no. 0, pp.95-106, 2017.

S. Sahmani, M. Mohammadi Aghdam, "Boundary layer modeling of nonlinear axial buckling behavior of functionally graded cylindrical nanoshells based on the surface elasticity theory", Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, vol. 42, no. 3, pp.229-245, 2017.

S. Sahmani, M. Mohammadi Aghdam, "Size-dependent axial instability of microtubules surrounded by cytoplasm of a living cell based on nonlocal strain gradient elasticity theory", Journal of Theoretical Biology, vol. 422, no. 0, pp.59-71, 2017.

S.A. Sheikholeslami, M. Mohammadi Aghdam, E. Zappino, E. Carrera, "Application of refined beam elements to the coupled-field analysis of magnetostrictive microbeams", Composites Part B-Engineering, vol. 115, no. 0, pp.14-20, 2017.

Yasin Heydarpour, M. Mohammadi Aghdam, "A coupled integral-differential quadrature and B-spline based multi-step technique for transient analysis of VSCL plates", Acta Mechanica, vol. 0, no. 0, pp.1-22, 2017.

M. Mohammadzadeh Keleshteri, H. Asadi, M. Mohammadi Aghdam, "Geometrical nonlinear free vibration responses of FG-CNT reinforced composite annular sector plates integrated with piezoelectric layers", Composite Structures, vol. 171, no. 0, pp.100-112, 2017.

Ali Fallah, M. T. Ahmadian, K. Firozbakhsh, M. Mohammadi Aghdam, "Micromechanical modeling of rate-dependent behavior of Connective tissues", Journal of Theoretical Biology, vol. 416, no. 0, pp.119-128, 2017.

M. Eynbeygi, M. Mohammadi Aghdam, "On the micro-mechanical study of 1-3 type piezoelectric composites with semi-coupled thermo-electro-elastic effects", Meccanica, vol. 0, no. 0, pp.1-19, 2017.

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, Zadpoor A. A., "Analytical relationships for the mechanical properties of additively manufactured porous biomaterials based on octahedral unit cells", Applied Mathematical Modelling, vol. 46, no. 0, pp.408-422, 2017.

S. Sahmani, M. Mohammadi Aghdam, "Size dependency in axial postbuckling behavior of hybrid FGM exponential shear deformable nanoshells based on the nonlocal elasticity theory", Composite Structures, vol. 166, no. 0, pp.104-113, 2017.

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, H. Hosseini Toudeshky, "Comparison of elastic properties of open?cell metallic biomaterials with different unit cell types", Journal of Biomedical Materials Research Part B-Applied Biomaterials, vol. 0, no. 0, pp.1-13, 2017.

100

S. Sahmani, M. Mohammadi Aghdam, "Imperfection sensitivity of the size-dependent postbuckling response of pressurized FGM nanoshells in thermal environments", Archives of Civil and Mechanical Engineering, vol. 17, no. 0, pp.623-638, 2017.

101

S. Sahmani, M. Mohammadi Aghdam, M. Bahrami, "Nonlinear buckling and postbuckling behavior of cylindrical shear deformable nanoshells subjected to radial compression including surface free energy effects", Acta Mechanica Solida Sinica, vol. 30, no. 0, pp.209-222, 2017.

102

M. Mohammadi Aghdam, S. R. Morsali, S.M.A. Hosseini, M. Sadighi, "Mechanical Behavior of Unidirectional SiC/Ti Composites subjected to off-axis loading at Elevated Temperatures", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 688, no. 0, pp.244-249, 2017.

103

H. Zamani, M. Mohammadi Aghdam, M. Salehi, "Free damped vibration analysis of Mindlin plates with hybrid material-foundation viscoelasticity", International Journal of Mechanical Sciences, vol. 121, no. 0, pp.33-43, 2017.

104

S. Sahmani, M. Mohammadi Aghdam, "Nonlinear instability of hydrostatic pressurized hybrid FGM exponential shear deformable nanoshells based on nonlocal continuum elasticity", Composites Part B-Engineering, vol. 114, no. 0, pp.404-417, 2017.

105

S. Sahmani, M. Mohammadi Aghdam, "Temperature-dependent nonlocal instability of hybrid FGM exponential shear deformable nanoshells including imperfection sensitivity", International Journal of Mechanical Sciences, vol. 122, no. 0, pp.129-142, 2017.

106

R. Hedayati, Shahram Janbaz, M. Sadighi, M. Mohammadi Aghdam, Amir Abbas Zadpoor, "How does tissue regeneration influence the mechanical behavior of additively manufactured porous biomaterials?", Journal of The Mechanical Behavior of Biomedical Materials, vol. 65, no. 0, pp.831-841, 2016.

107

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, Amir Abbas Zadpoor, "Mechanical Properties of Additively Manufactured Thick Honeycombs", Materials, vol. 9, no. 8, pp.613-636, 2016.

108

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, Amir Abbas Zadpoor, "Mechanical properties of additively manufactured octagonal honeycombs", Materials Science and Engineering C-Materials For Biological Applications, vol. 69, no. 0, pp.1307-1317, 2016.

109

Y. Heydarpour, M. Mohammadi Aghdam, "A novel hybrid Bezier based multi-step and differential quadrature method for analysis of rotating FG conical shells under thermal shock", Composites Part B-Engineering, vol. 97, no. 0, pp.120-140, 2016.

110

Y. Heydarpour, M. Mohammadi Aghdam, "A hybrid Bzier based multi-step method and differential quadrature for 3D transient response of variable stiffness composite plates", Composite Structures, vol. 154, no. 0, pp.344-359, 2016.

111

S. Sahmani, M. Mohammadi Aghdam, M. Bahrami, "Surface free energy effects on the postbuckling behavior of cylindrical shear deformable nanoshells under combined axial and radial compressions", Meccanica, vol. 0, no. 0, pp.1-24, 2016.

112

S. Sahmani, M. Mohammadi Aghdam, A.h. Akbarzadeh, "Size-dependent buckling and postbuckling behavior of piezoelectric cylindrical nanoshells subjected to compression and electrical load", Materials and Design, vol. 105, no. 0, pp.341-351, 2016.

113

Y. Heydarpour, M. Mohammadi Aghdam, "Transient analysis of rotating functionally graded truncated conical shells based on the Lord-Shulman model", Thin-Walled Structures, vol. 104, no. 0, pp.168-184, 2016.

114

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, Amir Abbas Zadpoor, "Mechanical properties of regular porous biomaterials made from truncated cube repeating unit cells: Analytical solutions and computational models", Materials Science and Engineering C-Materials For Biological Applications, vol. 60, no. 0, pp.163-183, 2016.

115

M. Mohammadi Aghdam, S. Morsali, "Effects of manufacturing environments on the residual stresses in a SiC/Ti metal-matrix composite", Science and Engineering of Composite Materials, vol. 0, no. 0, pp.1-8, 2016.

116

M. Amereh Bozchalouee, M. Mohammadi Aghdam, Mahdi Golkaram, "Design and modeling of a novel translational and angular micro-electromechanical accelerometer", Aerospace Science and Technology, vol. 50, no. 0, pp.15-24, 2016.

117

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, Amir Abbas Zadpoor, "Effect of mass multiple counting on the elastic properties of open-cell regular porous biomaterials", Materials and Design, vol. 89, no. 0, pp.9-20, 2016.

118

A. Fallah, M.t. Ahmadian, K. Firozbakhsh, M. Mohammadi Aghdam, "Micromechanics and Constitutive Modeling of Connective Soft Tissues", Journal of The Mechanical Behavior of Biomedical Materials, vol. 60, no. 0, pp.157-176, 2016.

119

H. Zamani, M. Mohammadi Aghdam, "Hybrid material and foundation damping of Timoshenko beams", Journal of Vibration and Control, vol. 0, no. 0, pp.1-19, 2016.

120

S. Sahmani, M. Mohammadi Aghdam, M. Bahrami, "Size-dependent axialbucklingandpostbucklingcharacteristics of cylindricalnanoshellsindifferenttemperatures", International Journal of Mechanical Sciences, vol. 107, no. 0, pp.170-179, 2016.

121

R. Hedayati, H. Hosseini Toudeshky, M. Sadighi, M. Mohammadi Aghdam, Amir Abbas Zadpoor, "Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials", International Journal of Fatigue, vol. 84, no. 0, pp.67-79, 2015.

122

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, Amir Abbas Zadpoor, "Mechanical behavior of additively manufactured porous biomaterials made from truncated cuboctahedron unit cells", International Journal of Mechanical Sciences, vol. 106, no. 0, pp.19-38, 2015.

123

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, Amir Abbas Zadpoor, "Mechanics of additively manufactured porous biomaterials based on the rhombicuboctahedron unit cell", Journal of The Mechanical Behavior of Biomedical Materials, vol. 53, no. 0, pp.272-294, 2015.

124

A. Daman Pak Moghaddam, M. Bodaghi, Liao, M. Mohammadi Aghdam, M. Shakeri, "A simple and efficient 1-D macroscopic model for shape memory alloys considering ferro-elasticity effect", Smart Structures and Systems, vol. 16, no. 4, pp.641-665, 2015.

125

Isa Ahmadi, M. Mohammadi Aghdam, "Elasto-Plastic MLPG Method for Micromechanical Modeling of Heterogeneous Materials", Cmes-Computer Modeling In Engineering and Sciences, vol. 108, no. 1, pp.21-48, 2015.

126

A. Daman Pak Moghaddam, M. Mohammadi Aghdam, M. Shakeri, "Micromechanics of shape memory alloy fiber-reinforced composites subjected to multi-axial non-proportional loadings", Journal of Intelligent Material Systems and Structures, vol. 26, no. 18, pp.2431-2445, 2015.

127

S. Sahmani, M. Bahrami, M. Mohammadi Aghdam, "Surface stress effects on the nonlinear postbuckling characteristics of geometrically imperfect cylindrical nanoshells subjected to axial compression", International Journal of Engineering Science, vol. 99, no. 0, pp.92-106, 2015.

128

S. Sahmani, M. Bahrami, M. Mohammadi Aghdam, "Surface stress effects on the nonlinear postbuckling characteristics of geometrically imperfect cylindrical nanoshells subjected to torsional load", Composites Part B-Engineering, vol. 84, no. 0, pp.140-154, 2015.

129

M. Bodaghi, A. Daman Pak Moghaddam, Liao, M. Mohammadi Aghdam, M. Shakeri, "Modeling and analysis of reversible shape memory adaptive panels", Journal of Intelligent Material Systems and Structures, vol. 0, no. 0, pp.1-26, 2015.

130

S. Sahmani, M. Bahrami, M. Mohammadi Aghdam, "Surface stress effects on the postbuckling behavior of geometrically imperfect cylindrical nanoshells subjected to combined axial and radial compressions", International Journal of Mechanical Sciences, vol. 100, no. 0, pp.1-22, 2015.

131

S. Sahmani, M. Bahrami, M. Mohammadi Aghdam, Reza Ansari, "Postbuckling behavior of circular higher-order shear deformable nanoplates including surface energy effects", Applied Mathematical Modelling, vol. 39, no. 13, pp.3678-3689, 2015.

132

A. Daman Pak Moghaddam, W.h. Liao, M. Mohammadi Aghdam, M. Shakeri, M. Bodaghi, "Micro-macro thermo-mechanical analysis of axisymmetric shape memory alloy composite cylinders", Composite Structures, vol. 131, no. 0, pp.1001-1016, 2015.

133

S. Sahmani, M. Mohammadi Aghdam, M. Bahrami, "On the postbuckling behavior of geometrically imperfect cylindrical nanoshells subjected to radial compression including surface stress effects", Composite Structures, vol. 131, no. 0, pp.414-424, 2015.

134

S. Sahmani, M. Mohammadi Aghdam, M. Bahrami, "Nonlinear buckling and postbuckling behavior of cylindrical nanoshells subjected to combined axial and radial compressions incorporating surface stress effects", Composites Part B-Engineering, vol. 79, no. 0, pp.676-691, 2015.

135

M. Eynbeygi, M. Mohammadi Aghdam, "A micromechanical study on the electro-elastic behavior of piezoelectric fiber-reinforced composites using the element-free Galerkin method", Acta Mechanica, vol. 0, no. 0, pp.1-18, 2015.

136

M. Mohammadi Aghdam, S.M.A. Hosseini, S. Morsali, "Simulation of interface damage in metal matrix composites under off-axis loading using cohesive zone model", Computational Materials Science, vol. 108, no. 0, pp.42-47, 2015.

137

H. Asadi, A. H. Akbarzadeh, Z. T. Chen, M. Mohammadi Aghdam, "Enhanced thermal stability of functionally graded sandwich cylindrical shells by shape memory alloys", Smart Materials and Structures, vol. 24, no. 4, pp.1-14, 2015.

138

H. Asadi, Y. Kiani Harchegani, M. Mohammadi Aghdam, M. Shakeri, "Enhanced thermal buckling of laminated composite cylindrical shells with shape memory alloy", Journal of Composite Materials, vol. 0, no. 0, pp.1-14, 2015.

139

M. Bodaghi, M. Shakeri, M. Mohammadi Aghdam, "Passive vibration control of plate structures using shape memory alloy ribbons", Journal of Vibration and Control, vol. 0, no. 0, pp.1-20, 2015.

140

S. Sahmani, M. Mohammadi Aghdam, M. Bahrami, "On the free vibration characteristics of postbuckled third-order shear deformable FGM nanobeams including surface effects", Composite Structures, vol. 121, no. 0, pp.377-385, 2014.

141

A. Daman Pak Moghaddam, M. Mohammadi Aghdam, M. Shakeri, "Micromechanics of Shape Memory Alloy Fiber-reinforced Composites Subjected to Multi-axial Non-proportional Loadings", Journal of Intelligent Material Systems and Structures, vol. 0, no. 0, pp.1-15, 2014.

142

A. Daman Pak Moghaddam, M. Mohammadi Aghdam, M. Shakeri, "Micro-mechanics of Composite with SMA Fibers Embedded in Metallic/Polymeric Matrix Under Off-axial Loadings", European Journal of Mechanics A-Solids, vol. 49, no. 0, pp.467-480, 2014.

143

H. Niknamjahromi, M. Mohammadi Aghdam, "A semi analytical approach for large amplitude free vibration and buckling of nonlocal FG beams resting on elastic foundation", Composite Structures, vol. 119, no. 0, pp.452-462, 2014.

144

M. Bodaghi, M. Shakeri, M. Mohammadi Aghdam, "Thermo-mechanical behavior of shape adaptive composite plates with surface-bonded shape memory alloy ribbons", Composite Structures, vol. 119, no. 0, pp.115-133, 2014.

145

M. Seyedkanani, H. Niknamjahromi, A. Ohadi Hamadani, M. Mohammadi Aghdam, "Effect of nonlinear elastic foundation on large amplitude free and forced vibration of functionally graded beam", Composite Structures, vol. 115, no. 0, pp.60-68, 2014.

146

M. Eynbeygi, M. Mohammadi Aghdam, "A micromechanical study on the electro-elastic behavior of piezoelectric fibrous composites using element free Galerkin method", , vol. 14, no. 6, pp.175-184, 2014.

147

H. Zamani, M. Bodaghi, M. Mohammadi Aghdam, M. Salehi, "Accurate Damping Analysis of Viscoelastic Composite Beams and Plates on Suppressive Foundation", Journal of Composite Materials, vol. 0, no. 0, , 2014.

148

S. Sahmani, M. Bahrami, M. Mohammadi Aghdam, Reza Ansari, "Surface effects on the nonlinear forced vibration response of third-order shear deformable nanobeams", Composite Structures, vol. 118, no. 0, pp.149-158, 2014.

149

Y. Heydarpour, M. Mohammadi Aghdam, Pirooz Malekzadeh, "Free vibration analysis of rotating functionally graded carbon nanotube-reinforced composite truncated conical shells", Composite Structures, vol. 117, no. 0, pp.187-200, 2014.

150

H. Niknamjahromi, A. Fallah, M. Mohammadi Aghdam, "Nonlinear bending of functionally graded tapered beams subjected to thermal and mechanical loading", International Journal of Non-Linear Mechanics, vol. 65, no. 0, pp.141-147, 2014.

151

A. Daman Pak Moghaddam, M. Bodaghi, M. Mohammadi Aghdam, M. Shakeri, "Shape Control of Shape Memory Alloy Composite Beams in the Post-buckling Regime", Aerospace Science and Technology, vol. 0, no. 0, , 2014.

152

H. Asadi, M. Bodaghi, M. Shakeri, M. Mohammadi Aghdam, "Nonlinear Dynamics of SMA Fibers Reinforced Composite Beams Subjected to a Primary/Secondary- Resonance Excitation", Acta Mechanica, vol. 0, no. 0, , 2014.

153

M. Akbari Beni, Y. Kiani Harchegani, M. Mohammadi Aghdam, M.R. Eslami, "Free vibration of FGM Lvy conical panels", Composite Structures, vol. 116, no. 0, pp.732-746, 2014.

154

M. Mohammadi Aghdam, S. Morsali, "Effects of manufacturing parameters on residual stresses in SiC/Ti composites by an elastic-viscoplastic micromechanical model", Computational Materials Science, vol. 91, no. 0, pp.62-67, 2014.

155

M. Bodaghi, A. Daman Pak Moghaddam, M. Mohammadi Aghdam, M. Shakeri, "A robust three-dimensional phenomenological model for polycrystalline SMAs: Analytical closed-form solutions", International Journal of Engineering Science, vol. 82, no. 0, pp.1-21, 2014.

156

M.S. Kiasat, H. Zamani, M. Mohammadi Aghdam, "On the transient response of viscoelastic beams and plates on viscoelastic medium", International Journal of Mechanical Sciences, vol. 83, no. 2014, pp.133-145, 2014.

157

A. Daman Pak Moghaddam, M. Bodaghi, M. Mohammadi Aghdam, M. Shakeri, "On the vibration control capability of shape memory alloy composite beams", Composite Structures, vol. 110, no. 1, pp.325-334, 2014.

158

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, "On the difference of pressure readings from the numerical, experimental and theoretical results in different bird strike studies", Aerospace Science and Technology, vol. 0, no. 0, , 2013.

159

M. Mohammadi Aghdam, M. Shahbaz, "Effects of Interphase Damage and Residual Stresses on Mechanical Behavior of Particle Reinforced Metal-Matrix Composites", Applied Composite Materials, vol. 0, no. 0, , 2013.

160

H. Asadi, M. Mohammadi Aghdam, "Large amplitude vibration and post-buckling analysis of variable cross-section composite beams on nonlinear elastic foundation", International Journal of Mechanical Sciences, vol. 0, no. 0, , 2013.

161

M. Bodaghi, A. Daman Pak Moghaddam, M. Mohammadi Aghdam, M. Shakeri, "Active shape/stress control of shape memory alloy laminated beams", Composites Part B-Engineering, vol. 56, no. 0, pp.889-899, 2013.

162

H. Asadi, M. Bodaghi, M. Shakeri, M. Mohammadi Aghdam, "On the free vibration of thermally pre/post-buckled shear deformable SMA hybrid composite beams", Aerospace Science and Technology, vol. 31, no. 1, pp.73-86, 2013.

163

M. Bodaghi, A. Daman Pak Moghaddam, M. Mohammadi Aghdam, M. Shakeri, "A phenomenological SMA model for combined axial-torsional proportional/non-proportional loading conditions", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 587, no. 0, pp.12-26, 2013.

164

H. Niknamjahromi, M. Mohammadi Aghdam, A. Fallah, "Free vibration analysis of Mindlin plates partially resting on Pasternak foundation", International Journal of Mechanical Sciences, vol. 75, no. 1, pp.1-7, 2013.

165

Y. Heydarpour, Dr. P. Malekzadeh, M. Mohammadi Aghdam, "Free vibration of functionally graded truncated conical shells under internal pressure", Meccanica, vol. 0, no. 0, , 2013.

166

M. Mohammadi Aghdam, S. Morsali, "Damage initiation and collapse behavior of unidirectional metal matrix composites at elevated temperatures", Computational Materials Science, vol. 79, no. 1, pp.402-407, 2013.

167

H. Asadi, M. Mohammadi Aghdam, M. Shakeri, "Vibration analysis of axially moving line supported functionally graded plates with temperature-dependent properties", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 0, no. 0, , 2013.

168

M. Bodaghi, A. Daman Pak Moghaddam, M. Mohammadi Aghdam, M. Shakeri, "Geometrically non-linear transient thermo-elastic response of FG beams integrated with a pair of FG piezoelectric sensors", Composite Structures, vol. 107, no. 1, pp.48-59, 2013.

169

H. Asadi, M. Bodaghi, M. Shakeri, M. Mohammadi Aghdam, "An analytical approach for nonlinear vibration and thermal stability of shape memory alloy hybrid laminated composite beams", European Journal of Mechanics A-Solids, vol. 42, no. 0, pp.454-468, 2013.

170

F. Mousazadegan, S. Saharkhiz, M. Latifi, M. Mohammadi Aghdam, "Seam Pucker Rating by Deconvolution Residual Method", International Journal of Clothing Science and Technology, vol. 25, no. 3, pp.150-170, 2013.

171

A. Daman Pak Moghaddam, M. Shakeri, M. Mohammadi Aghdam, "A new finite element model for low-velocity impact analysis of sandwich beams subjected to multiple projectiles", Composite Structures, vol. 104, no. 1, pp.21-33, 2013.

172

A. Daman Pak Moghaddam, M. Bodaghi, M. Mohammadi Aghdam, M. Shakeri, "Active control of geometrically non-linear transient response of sandwich beams with a flexible core using piezoelectric patches", Composite Structures, vol. 100, no. 0, pp.517-531, 2013.

173

A. Fallah, M. Mohammadi Aghdam, "Large Amplitude Free Vibration and Post Buckling Analysis of Asymmetrically Laminated Beams on Pasternak Foundation", Nonlinear Engineering, vol. 1, no. 1, pp.35-48, 2012.

174

M. Golkaram, M. Mohammadi Aghdam, "Free transverse vibration analysis of thin rectangular plates locally suspended on elastic beam", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 0, no. 0, , 2012.

175

M. Bodaghi, A. Daman Pak Moghaddam, M. Mohammadi Aghdam, M. Shakeri, "Nonlinear active control of FG beams in thermal environments subjected to blast loads with integrated FGP sensor/actuator layers", Composite Structures, vol. 94, no. 10, pp.3612-3623, 2012.

176

M. Bayat, M. Mohammadi Aghdam, "A micromechanics based analysis of hollow fiber composites using DQEM", Composites Part B-Engineering, vol. 0, no. 0, , 2012.

177

Ali Fallah, M. Mohammadi Aghdam, M. H. Kargarnovin, "Free vibration analysis of moderately thick functionally graded plates on elastic foundation using the extended Kantorovich method", Archive of Applied Mechanics, vol. 0, no. 0, , 2012.

178

E. Ameri, M. Mohammadi Aghdam, M. Shakeri, "Global optimization of laminated cylindrical panels based on fundamental natural frequency", Composite Structures, vol. 0, no. 0, , 2012.

179

M. Bayat, M. Mohammadi Aghdam, "MICROMECHANICAL ANALYSIS OF UNIDIRECTIONAL COMPOSITES USING A LEAST-SQUARES-BASED DIFFERENTIAL QUADRATURE ELEMENT METHOD", Journal of Mechanics of Materials and Structures, vol. 7, no. 2, pp.119-135, 2012.

180

M. Zamani, A. Fallah, M. Mohammadi Aghdam, "Free vibration analysis of moderately thick trapezoidal symmetrically laminated plates with various combinations of boundary conditions", European Journal of Mechanics A-Solids, vol. 36, no. 0, pp.204-212, 2012.

181

M. Bayat, M. Mohammadi Aghdam, "A micromechanics-based analysis of effects of square and hexagonal fiber arrays in fibrous composites using DQEM", European Journal of Mechanics A-Solids, vol. 32, no. 1, pp.32-40, 2012.

182

A. Fallah, M. Mohammadi Aghdam, "Thermo-mechanical buckling and nonlinear free vibration analysis of functionally graded beams on nonlinear elastic foundation", Composites Part B-Engineering, vol. 0, no. 0, , 2011.

183

M. J. Mahmoodi, M. Mohammadi Aghdam, "Damage analysis of fiber reinforced Ti-alloy subjected to multi-axial loading - A Micromechanical approach", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 528, no. 27, pp.7983-7990, 2011.

184

S. Maleki, A. Andakhshideh, M. Mohammadi Aghdam, "Bending Analysis of Moderately Thick Laminated Conical Panels With Various Boundary Conditions", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 225, no. 6, pp.1291-1300, 2011.

185

A. Fallah, M. Mohammadi Aghdam, "Nonlinear free vibration and post-buckling analysis of functionally graded beams on nonlinear elastic foundation", European Journal of Mechanics A-Solids, vol. 30, no. 4, pp.571-583, 2011.

186

S. Nobakhti, M. Mohammadi Aghdam, "Static analysis of rectangular thick plates resting on two-parameter elastic boundary strips", European Journal of Mechanics A-Solids, vol. 30, no. 3, pp.442-448, 2011.

187

I. Ahmadi, M. Mohammadi Aghdam, "Heat transfer in composite materials using a new truly local meshless method", International Journal of Numerical Methods For Heat and Fluid Flow, vol. 21, no. 3, pp.293-309, 2011.

188

Ali Fallah, M.h. Kargarnovin, M. Mohammadi Aghdam, "Free vibration analysis of symmetrically laminated fully clamped skew plates using extended Kantorovich method", Key Engineering Materials, vol. 471, no. 1, pp.739-744, 2011.

189

Ali Fallah, H. Shahsavari, A. Pasharavesh, M. Mohammadi Aghdam, "Large amplitude thermo-mechanical vibration analysis of symmetrically laminated composite beams", Key Engineering Materials, vol. 471, no. 1, pp.745-750, 2011.

190

N. Mardani Mehrabad, M. Safar Johari, M. Mohammadi Aghdam, "Using Finite- Element Method for Analyzing the Effect of Coriolis Acceleration on the Ring- Spinning Balloon", Chemical, Polymer and Material Science and Technology, Amirkabir, vol. سال بیست و, no. 72, pp.93-98, 2011.

191

M. Mohammadi Aghdam, N. Shahmansouri, K. Bigdeli, "Bending Analysis of Moderately Thick Functionally Graded Conical Panels", Composite Structures, vol. 93, no. 5, pp.1376-1384, 2011.

192

K. Bigdeli, M. Mohammadi Aghdam, "A SEMI ANALYTICAL SOLUTION FOR THE BENDING OF CLAMPED LAMINATED DOUBLY CURVED OR SPHERICAL PANELS", Journal of Mechanics of Materials and Structures, vol. 5, no. 6, pp.855-873, 2010.

193

I. Ahmadi, M. Mohammadi Aghdam, "A Generalized Plane Strain Meshless Local Petrov-Galerkin Method for the Micromechanics of Thermomechanical Loading of Composites", Journal of Mechanics of Materials and Structures, vol. 5, no. 4, , 2010.

194

I. Ahmadi, M. Mohammadi Aghdam, "A truly generalized plane strain meshless method for combined normal and shear loading of fibrous composites", Engineering Analysis With Boundary Elements, vol. 0, no. 0, , 2010.

195

S.R. Falahatgar, M. Salehi, M. Mohammadi Aghdam, "Micro-Macro Analysis of Viscoelastic Unidirectional Laminated Composite Plates Using DR Method", Applied Composite Materials, vol. 17, no. 5, , 2010.

196

I. Ahmadi, Nasrin Sheikhi, M. Mohammadi Aghdam, S. Nourazar Khoshknab, "A new local meshless method for steady-state heat conduction in heterogeneous materials", Engineering Analysis With Boundary Elements, vol. 34, no. 12, pp.1105-1112, 2010.

197

M. Mohammadi Aghdam, N. Shahmansouri, M. Mohammadi, ". Extended Kantorovich method for static analysis of moderately thick functionally graded sector plates", Mathematics and Computers In Simulation, vol. 0, no. 0, , 2010.

198

M. Mohammadi Aghdam, K. Bigdeli, N. Shahmansouri, "A Semi-Analytical Solution for Bending of Moderately Thick Doubly Curved Functionally Graded Panels", Mechanics of Advanced Materials and Structures, vol. 17, no. 5, , 2010.

199

M. Abkar, P. Forooghi, A. Abbassi, M. Mohammadi Aghdam, "Heat transfer of non-Newtonian fluid flow in a channel lined with porous layers under thermal non-equilibrium condition", Journal of Porous Media, vol. 13, no. 3, , 2010.

200

H.R. Chamani, I. Sattari Far, M. Mohammadi Aghdam, "A study on the thermal boundary condition effects on the distribution of temperature inside diesel engines", , vol. 5, no. 17, pp.71-81, 2010.

201

I. Ahmadi, M. Mohammadi Aghdam, "Micromechanics of Fibrous Composites Subjected to Combined Shear and Thermal loading using a Truly Meshless Method", Computational Mechanics, vol. 0, no. 0, , 2010.

202

M.J. Mahmoodi, M. Mohammadi Aghdam, M. Shakeri, "Micromechanical modeling of interface damage of metal matrix composites subjected to off-axis loading", , vol. , no. 31, , 2010.

203

I. Ahmadi, M. Mohammadi Aghdam, "Analysis of micro-stresses in a SiC/Ti metal matrix composite using a truly local meshless method", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 224, no. 0, , 2009.

204

M.J. Mahmoodi, M. Mohammadi Aghdam, M. Shakeri, "The effects of interfacial debonding on the elastoplastic response of unidirectional silicon carbide-titanium composites", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 224, no. 2, , 2009.

205

N. Mardani Mehrabad, M. Safar Johari, M. Mohammadi Aghdam, "Finite-Element and Multivariate Analyses of Tension Distribution and Spinning Parameters Effects on the Ring-Spinning Balloon", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 224, no. 2, , 2009.

206

M. Mohammadi Aghdam, M. Gorji Bandpay, S.R. Falahatgar, "Interface damage of SiC/Ti metal matrix composites subjected to combined thermal and axial shear loading", Computational Materials Science, vol. , no. , , 2009.

207

A. Andakhshideh, , M. Mohammadi Aghdam, "Non-Linear Bending Analysis of Laminated Sector Plates Using Generalized Differential Quadrature", Composite Structures, vol. 92, no. 9, , 2009.

208

F. Alijani, M. Mohammadi Aghdam, "A semi-analytical solution for stress analysis of moderately thick laminated cylindrical panels with various boundary conditions", Composite Structures, vol. , no. 89, , 2009.

209

S.R. Falahatgar, M. Salehi, M. Mohammadi Aghdam, "Nonlinear Viscoelastic Response of Unidirectional Fiber-Reinforced Composites in Off-Axis Loading", Journal of Reinforced Plastics and Composites, vol. , no. 15, , 2009.

210

M. Mohammadi Aghdam, M. Mohammadi, "Bending analysis of thick orthotropic sector plates with various loading and boundary conditions", Composite Structures, vol. , no. 88, , 2009.

211

S.M. Mousavi, M. Mohammadi Aghdam, "Static Bending Analysis of Laminated Cylindrical Panels With Various Boundary Conditions Using The Differential Cubature Method", Journal of Mechanics of Materials and Structures, vol. , no. 3, , 2009.

212

M. Mohammadi Aghdam, S.R. Falahatgar, M. Gorji Bandpay, "Micromechanical consideration of interface damage in fiber reinforced Ti-alloy under various combined loading conditions", , vol. , no. 68, , 2008.

213

F. Alijani, M. Mohammadi Aghdam, M. Abouhamze, "Application of the extended Kantorovich method to the bending of clamped cylindrical panels", European Journal of Mechanics A-Solids, vol. , no. 27, , 2008.

214

M. Mohammadi Aghdam, M. Mohammadi, V. Erfanian, "Bending analysis of thin annular sector plates using extended Kantorovich method", , vol. , no. 12, , 2007.

215

M. Abouhamze, M. Mohammadi Aghdam, F. Alijani, "Bending Analysis of Symmetrically Laminated Cylindrical Panels Using The Extended Kantorovich Method", Mechanics of Advanced Materials and Structures, vol. , no. 14, , 2007.

216

S.M.R. Alavi Tabatabai, M. Mohammadi Aghdam, S.A. Eftekhari, "Three -Dimensional Elasticity Analysis of Thick Rectangular Laminated Composite Plates Using Meshless Local Petrov- Galerkin (MLPG ) Method", Applied Mechanics and Materials, vol. , no. 0, , 2006.

217

M. Mohammadi Aghdam, M. Najafabadi Farahani, M. Dashti Khoydaki, S.M. Rezaei Niya, "Application of Generalized Differential Quadrature Method to The Bending of Thick Laminated Plates With Various Boundary Conditions", Applied Mechanics and Materials, vol. , no. 0, , 2006.

218

M. Mohammadi Aghdam, A. Dejestan, "Micromechanics Based Analysis of Randomly Distributed Fiber Reinforced Composites Using Simplified Unit Cell Model", Composite Structures, vol. , no. 71, , 2005.

219

M. Mohammadi Aghdam, S.R. Falahatgar, "Micromechanical modeling of interface damage of metal matrix composites subjected to transverse loading", Composite Structures, vol. , no. 66, , 2004.

220

M. Mohammadi Aghdam, A. Kamalikhah, "Micromechanical analysis of layered systems of MMCs subjected to bending-effects of thermal residual stresses", Composite Structures, vol. , no. 66, , 2004.

221

M. Mohammadi Aghdam, S.R. Falahatgar, "Bending analysis of thick laminated plates using extended kantorovich method", Composite Structures, vol. , no. , , 2003.

222

M. Mohammadi Aghdam, A. Khugeh, "More on the effects of thermal residual and hydrostatic stresses on yielding behavior of unidirectional composites", Composite Structures, vol. , no. 1, , 2003.

223

M. Mohammadi Aghdam, D.j. Smith, M.j. Paviar, "Asymmetric behaviour of fibrous metal matrix composites", Materials Science and Technology, vol. , no. 9, , 2001.

224

M. Mohammadi Aghdam, M.j. Paviar, D.j. Smith, "Micro-mechanics of off-axis loading of metal matrix composites using finite element analysis", International Journal of Solids and Structures, vol. , no. , , 2001.

225

M. Mohammadi Aghdam, J.a. Smith, M.j. Paviar, "Micromechanical modelling of SiC/Ti MMC,s subjected to bending", Materials Science and Technology, vol. , no. 16, , 2000.

226

M. Mohammadi Aghdam, D.j. Smith, M.j. Paviar, "Finite element micromechanical modelling of yield and collapse behaviour of metal matrix composites", Journal of The Mechanics and Physics of Solids, vol. 48, no. 3, , 2000.

227

M. Mohammadi Aghdam, M. Shakeri, S. Fariborz, "Solution to the reissner plate with clamed edges", Journal of Engineering Mechanics, vol. , no. 122, , 1996.

228

M. Shakeri, S. Fariborz, M. Mohammadi Aghdam, "Application of extended kantorovich method to the bending of reissner ,s plate", , vol. 0, no. 18, , 1991.

دروس ارائه شده

عنوان درس

توصیف درس

سرفصل ها

دوره درسی

Statics

4032

Strength of Materials (II)

4032

Advanced Numerical Methods

4032

Advanced Numerical Methods

4031

Finite Element Method

4031

Statics

4022

Strength of Materials (II)

4022

Advanced Numerical Methods

4021

Strength of Materials (II)

4021

Strength of Materials (I)

4021