محمد محمدی اقدم - دانشگاه صنعتی امیرکبیر

خدمات ویژه: هیات علمی دانشجویان دانش آموختگان کارکنان

مطالب پایگاه

اعضای هیات علمی

اینترنت

پست الکترونیک

اتوماسیون اداری و مکاتبات

پورتال آموزشی و پژوهشی

سامانه آموزش الکترونیک

مدیریت یادگیری - دروس حضوری

سامانه ارتقای اساتید(اوج)

سامانه جامع نظام پیشنهادها

سامانه یکپارچه کتابخانه‌ها

سامانه مدیریت یکپارچه آموزش کارکنان

دانشگاه صنعتی امیرکبیر

سامانه رزومه

محمد محمدی اقدم

استاد
دانشکده مهندسی مکانیک
گروه آموزشی طراحی جامدات

دریافت با فرمت PDF English

پست الکترونیک:

aghdam

aut.ac.ir

شماره تماس:

h-index (Scopus):

ارجاعات (Scopus):

7829

رساله‌های دکتری

عنوان پایان‌نامه

توسط

تاریخ دفاع

پایش آسیب خستگی در میله های فولادی با استفاده از مبدلهای پیزوالکتریک و ویژگی های امواج لمب

حمید صالحی و محمد محمدی اقدم

مهر 1401

ارائه مدل ساختاری برای پیش بینی رفتار ساقه مغز در اثر آسیب های مکانیکی

فائزه اسکندری و محمد محمدی اقدم

اسفند 1399

تحلیل رفتار صفحات کامپوزیت حاوی الیاف خمیده تحت بار متحرک با استفاده از تئوری الاستیسیته سه بعدی و منحنی های نربز

یاسین حیدرپور و محمد محمدی اقدم

آذر 1395

بررسی چند مقیاسی رفتار فوم های فلزی سلول باز تحت بارگذاری های ایستایی و خستگی پرچرخه

رضا هدایتی و محمد محمدی اقدم

تیر 1395

رفتار کمانش و پس کمانش نانو پوسته های استوانه ای با در نظر گرفتن اثر تنش سطحی تحت بار محوری به همراه شبیه سازی دینامیک مولکولی

سعید سهمانی و محمد محمدی اقدم

اسفند 1394

تحلیل استاتیکی و دینامیکی ورق مستطیل با نوارهایی از آلیاژ حافظه دار

مهدی بداغی و محمد محمدی اقدم

اردیبهشت 1394

تحلیل رفتار ترمومکانیکی مواد و سازه های تقویت شده با الیاف حافظه دار با استاده از مدل میکرومکانیک

علیرضا دامن پاک مقدم و محمد محمدی اقدم

اردیبهشت 1394

توسعه روش دیفرانسیل کوادریچر المانی (DQEM ) به تحلیل مایکرومکانیک مواد مرکب تحت بارهای ترمومکانیکی

محمد بیات و محمد محمدی اقدم

خرداد 1391

بررسی مایکرومکانیک شروع وگسترش خرابی موادمرکب زمینه فلزی تحت بار ترمومکانیکی با استفاده از روش بدون المان

عیسی احمدی و محمد محمدی اقدم

دی 1389

تحلیل مکانیزمهای خرابی در مواد مرکب پایه فلزی با استفاده از تعمیم روش سلول واحد

محمدجواد محمودی و محمد محمدی اقدم

دی 1388

پایان‌نامه‌های کارشناسی ارشد

عنوان پایان‌نامه

توسط

تاریخ دفاع

آنالیز ساختار فرامواد انعطاف پذیر تحت تاثیر نیروی هارمونیک

نوید ربیعی دستجردی و محمد محمدی اقدم

اسفند 1402

تحلیل خمش ورق های متوازی الاضلاع کامپوزیتی مشبک با استفاده از روش کانتروویچ توسعه یافته

محمد حقیقی و محمد محمدی اقدم

مهر 1402

تحلیل ارتعاشات برهم کنش پوسته مخروطی سه لایه با هسته آگزتیک با جریان سیال تراکم ناپذیر

نادیا چنارانی و محمد محمدی اقدم

شهریور 1402

تحلیل خواص ویسکوالاستیک زیست مواد با استفاده از سلول های واحد الهام گرفته از مواد زیستی

محمد شکرنیا و محمد محمدی اقدم

مرداد 1402

مطالعه رفتار سازه های متخلخل آگزتیک تحت بارهای ترمومکانیکی

عرفان عیوض حصاری و محمد محمدی اقدم

اردیبهشت 1402

روش‌های شبیه‌سازی مشترک: بهبود ثبات عددی و رفتار همگرایی

رضا نوپورهولاری و محمد محمدی اقدم

اسفند 1401

توسعه یک روش مبتنی بر سرد کردن در حین جوشکاری جهت کاهش تنش پسماند در آلومینیوم 6061T6

حامد همت پور و محمد محمدی اقدم

اسفند 1401

تحلیل رفتار ترمو الاستیک سازه های متخلخل و سلولی تحت بارگذاری حرارتی-مکانیکی

فاطمه عابدینی و محمد محمدی اقدم

مهر 1401

تحلیل رفتار خمشی صفحات کامپوزیت‌ لایه‌ای با الیاف خمیده حاوی سوراخ تحت بارگذاری استاتیکی

رسول محمدی و محمد محمدی اقدم

شهریور 1401

مدلسازی رفتار ترمومکانیکی کامپوزیت ذره‌ ای از جنس آلیاژ حافظه‌ دار در زمینه فلزی با استفاده از روشهای میکرومکانیکی تحت بارگذاری استاتیکی

سیدنوید منصوری و محمد محمدی اقدم

خرداد 1401

بررسی رفتار ترمومکانیکی مواد متخلخل منظم تحت بارگذاری چند محوره

علی کوچکی و محمد محمدی اقدم

مهر 1400

تحلیل تجربی و عددی داربست های نانوکامپوزیتی مغناطیسی زیست سازگار

علی خالوندی و محمد محمدی اقدم

شهریور 1400

شبیه سازی دینامیک مولکولی و ساخت نانوکامپوزیت مغناطیسی آلژینات-پلی پیرول-هیدروکسی آپاتیت با کاربرد جایگزین استخوان

هادی کبیر و محمد محمدی اقدم

شهریور 1400

بررسی رفتار ویسکوالاستیک زیست مواد متخلخل

سیدمحسن حسینی و محمد محمدی اقدم

فروردین 1400

تعیین حد تسلیم ماده متخلخل با استفاده از یک روش ماکرو-میکرو مکانیکی

غزل السادات شریعت پناهی و محمد محمدی اقدم

آذر 1399

ساخت، مشخصه یابی و شبیه سازی بیوکامپوزیت پلی متیل متااکریلات – هیدروکسی آپاتیت تقویت شده با نانوذرات گرافن جهت کاربرد در مهندسی پزشکی

عارف بابکی و محمد محمدی اقدم

شهریور 1399

تحلیل رفتار افزودنی الاستین بر خواص بیومکانیکی نانوکامپوزیت هیدروکسی آپاتیت/ پلی متیل متااکریلات در مهندسی بافت استخوان تحت ضربه سرعت پایین

متین محمدزاده راد و محمد محمدی اقدم

شهریور 1399

اثر افزودن نانوذرات مغناطیسی بر خواص مکانیکی کامپوزیت هیدروکسی آپاتیت/پلی متیل متااکریلات مورد استفاده در بافت استخوان

فریدالدین موذنی و محمد محمدی اقدم

بهمن 1398

تشخیص سرطان پروستات با استفاده از تصاویر التراسونیک به روش بازسازی غیرمستقیم

سیدشهاب الدین اسحاقی نیا و محمد محمدی اقدم

بهمن 1398

تحلیل تجربی و عددی رفتار خمشی ورق کامپوزیتی با تقویت کننده نانو لوله های کربنی دو جداره

محمودرضا دهنوی و محمد محمدی اقدم

بهمن 1397

مطالعه تئوری و تجربی خواص مکانیکی کامپوزیت های پلیمری تقویت شده با نانوورق های گرافن

محسن معینی و محمد محمدی اقدم

بهمن 1397

تحلیل وابسته به اندازه ارتعاشات اجباری نانولوله های کربنی انتقال دهنده سیال

محمد معبودی و محمد محمدی اقدم

بهمن 1397

بررسی ناپایداری پوسته مخروطی FG-CNTRC ناشی از کنش و واکنش جامد و سیال

نرگس محمدی و محمد محمدی اقدم

مهر 1397

مدلسازی میکرومکانیکی متامتریال با ساختار میورا اوری

حسین سلیمانی و محمد محمدی اقدم

تیر 1397

مدلسازی ریزمقیاسی رفتار مکانیکی استخوان با بهره گیری از تصاویر سی تی اسکن

نعیم قویدل نیا و محمد محمدی اقدم

بهمن 1396

بررسی تحلیلی و تجربی خواص مکانیکی فوم های سلول باز تحت بارگذاری استاتیکی

ابوالفضل صالحی و محمد محمدی اقدم

دی 1396

ارتعاشات آزاد غیر خطی نانو پوسته های استوانه ای شکل

علی سرافراز و محمد محمدی اقدم

مهر 1396

تحلیل رفتار مکانیکی مواد چند جنسی با استفاده از روش المان محدود توسعه یافته

سیدمحمدجواد میرباقری و محمد محمدی اقدم

بهمن 1395

بررسی میکرو مکانیکی اثر لایه واسط با خواص تابعی در رفتار مکانیکی کامپوزیتهای الیافی

محسن یارمحمدی و محمد محمدی اقدم

دی 1394

بررسی عددی و تجربی رفتار مکانیکی فوم فلزی سلول بسته تحت بارگذاری ضربه

مهرداد کلوشانی و محمد محمدی اقدم

مهر 1394

مدل سازی و تحلیل تنش ورق فولادی وکامپوزیتی تحت بارهای ناشی از موج شوک زیرآب

حامد جعفری و محمد محمدی اقدم

مهر 1394

تحلیل اعوجاج هندسی در پانلهای چندلایه فلز-الیاف در فرایند پخت

محمد هدایتی نژاد و محمد محمدی اقدم

شهریور 1394

تحلیل تئوری و تجربی قانون نفوذ سنبه کروی در ورق های ساندویچی با هسته نرم

حسین روان بخش حبیب آبادی و محمد محمدی اقدم

بهمن 1393

مدل سازی مایکرومکانیکی خرابی لایه میانی الیاف و زمینه درمواد مرکب فلزی تحت بارگذاری خارج از محور

سیدمحمدامین حسینی و محمد محمدی اقدم

مهر 1393

بررسی ارتعاشات نانو تیر ساخته شده از مواد هدفمند

حامد نیکنام جهرمی و محمد محمدی اقدم

مهر 1393

بررسی میکرومکانیکی ماده مرکب فلزی تک جهته در دما های بالا

حمید توفیقی اصل و محمد محمدی اقدم

بهمن 1392

تحلیل کمانش پانل استوانه ای با لایه های پیزو

ارین صارمی مقدم و محمد محمدی اقدم

آبان 1392

آنالیز میکرومکانیکی مواد مرکب خود ترمیم شونده

سیده زهرا ایمن و محمد محمدی اقدم

آبان 1392

مدل سازی میکرومکانیکی رفتار مواد مرکب حاوی فایبرهای پیزوالکتریک

مهدی عین بیگی و محمد محمدی اقدم

آبان 1392

تحلیل پایداری ورقهای کامپوزیتی متقارن ومتعامد با جدایی لایه ای در عرض

محمدمصطفی باروتی و محمد محمدی اقدم

مهر 1392

تحلیل کمانش پانل های استوانه ای به روش کانترویچ توسعه یافته ( EKM )

بهروز نظری و محمد محمدی اقدم

شهریور 1392

تحلیل خمشی قطاع دایروی شکل ضخیم ساخته شده از مواد هدفمند تحت بار موضعی با استفاده از روش کانترویچ توسعه یافته.

محمدحسن سبحانی و محمد محمدی اقدم

آبان 1391

مدلسازی و تحلیل ارتعاشات ورق کامپوزیتی ویسکوالاستیک با استفاده از اطلاعات تستهای زمانمند

حسام الدین زمانی و محمد محمدی اقدم

آبان 1391

مدلسازی المان محدود پدیده بیرون کشیدن الیاف در مواد مرکب تک جهته

الیاس عبداللهی و محمد محمدی اقدم

مهر 1391

بررسی مایکرومکانیکی خرابی لایه مشترک زمینه و رشته در مواد مرکب تک جهته با خواص ویسکوالاستیک

سیدرضا مرسلی و محمد محمدی اقدم

بهمن 1390

ارائه ی مدل مایکرومکانیک سه بعدی برای شروع و گسترش خرابی لایه ی میانی در مواد مرکب ذره ای پایه فلزی

میلاد شهباز و محمد محمدی اقدم

بهمن 1390

حل معادلات پوسته های عمومی کامپوزیت توسط روش کانترویچ توسعه یافته

کسری بیگدلی و محمد محمدی اقدم

آذر 1388

تحلیل خمشی پوسته‌های باز مخروطی (FG) با استفاده از روش توسعه یافته کانترویچ

نسترن شاه منصوری و محمد محمدی اقدم

آذر 1388

تحلیل غیر خطی استاتیکی ورق قطاعی ضخیم به روش GDQ

عطیه اندخشیده و محمد محمدی اقدم

شهریور 1387

تحلیل پانل های استوانه ای ازمواد هدفمند تحت بار استاتیکی خمشی به روش GDQ

ستار مالکی و محمد محمدی اقدم

شهریور 1387

تحلیل تجربی و المان محدود پوسته مخروطی جدار نازک کامپوزیتی تحت اثر بارگذاری ترکیبی محوری و خمشی

سجاد شقاقی و محمد محمدی اقدم

شهریور 1387

تحلیل تنش ترمومکانیکی و تخمین عمر سرسیلندر موتور دیزل سنگین

حمیدرضا چمنی و محمد محمدی اقدم

اردیبهشت 1387

طراحی و بهینه سازی شبکه مبدلهای حرارتی بااستفاده از الگوریتم ژنتیک

محمد فسنقری و محمد محمدی اقدم

اردیبهشت 1386

تحلیل استاتیکی ورق ضخیم باشکل نامنظم، بارگذاری موضعی و شرایط مرزی ترکیبی توسط روش GDQEM

سعید فاضلی و محمد محمدی اقدم

آذر 1385

مدل المان محدود شرع خرابی در لایه میانی فایبروماتریس در مواد مرکب فلزی تحت بارگذاری مرکب

میثم گرجی بندپی و محمد محمدی اقدم

آذر 1385

استفاده از روش کانترویچ توسعه یافته (EKM) در حل خمش ورق های قطاعی

مسعود محمدی و محمد محمدی اقدم

آبان 1385

کاربرد روش کانترویچ توسعه یافته (EKM) در تحلیل خمش پانلهای استوانه ای

فربد علیجانی و محمد محمدی اقدم

آبان 1385

تحلیل خمشی پانلهای مخروطی ارتوتروپیک بااستفاده از روش GDQ

مهدی دشتی خویدکی و محمد محمدی اقدم

اسفند 1384

تحلیل تئوری - تجربی لوله های فلزی تحت بار محوری

جلیل پورمحمدی وفا و محمد محمدی اقدم

بهمن 1384

چیدمان مناسب لایه های پانل چندلایه برمبنای ارتعاشات آزاد بااستفاده از روش سیمپلکس

احسان عامری و محمد محمدی اقدم

بهمن 1384

مدل تحلیلی آرایش اتفاقی فایبرهادر مواد مرکب تک جهته باروش SUM

امیر دژستان و محمد محمدی اقدم

اسفند 1383

استفاده از روشهای بدون المان در تحلیل خمش ورقهای ارتوتروپیک

سیدمحمدرضا علوی طباطبایی و محمد محمدی اقدم

بهمن 1383

کتب

عنوان

نگارندگان/مترجمان

کشور ناشر

تاریخ انتشار

نسخه

داده های ثبت شده در پورتال

Nonlinear Approaches in Engineering Applications, Ch 2: Novel Predictor-Corrector Formulations for Solving Nonlinear Initial Value Problems

وحید احمدی کلخورانی, محمد محمدی اقدم

Germany

1401

Residual stresses in metal matrix composites

سیدرضا مرسلی, محمد محمدی اقدم

United Kingdom

1400

Nanomaterials for Advanced Biological Applications Size-Dependent Nonlinear Mechanics of Biological Nanoporous Microbeams

سعید سهمانی, محمد محمدی اقدم

Germany

1398

Nonlinear Approaches in Engineering Applications, Ch 11: A Semi-analytical Solution for Bending of Nonlinear Magnetostrictive Beams

سیدعبدالله شیخ الاسلامی, محمد محمدی اقدم

United States

1397

Nonlinear Approaches in Engineering Applications, Ch 5: Nonlinear Size-Dependent Instability of Hybrid FGM Nanoshells

سعید سهمانی, محمد محمدی اقدم

United States

1397

Nonlinear Approaches in Engineering Applications, Ch 7: Nonlinear Forced Vibration of Nanobeams

محمد محمدی اقدم, حامد نیکنام جهرمی

Germany

1395

Nonlinear Approaches in Engineering Applications, Ch 8: Analytical Solutions for Generalized Duffing Equation

محمد محمدی اقدم, علی فلاح

Germany

1395

Nonlinear approaches in Engineering Applications; Ch5: Nonlinear initial value ordinary differential equations

محمد محمدی اقدم, علی فلاح, پوریا حقی

United States

1393

سازه های مکانیکی تیر -ورق و پوسته

محمود شاکری, اکبر علی بیکلو, محمد محمدی اقدم

ایران

1387

مقالات ژورنال

داده های ثبت شده در پورتال

Ali Salmanizadeh Hassanabadi, Reza Nopour Hollari, Mohammad Mohammadi Aghdam, Yaser Kiani, Mohammad Reza Eslami, "On the free vibration characteristics of multiscale hybrid conical panels utilizing Chebyshev–Ritz route", MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, Vol. 0, Num. 0, Page 1-20, April 2024,

Hadi Kabir, Mohammad Mohammadi Aghdam, Saeed Saber Samandari, Mohsen Moeini, "A molecular dynamics study on the size effects of Fe3O4 nanoparticles on the mechanical characteristics of polypyrrole/Fe3O4 nanocomposite", MOLECULAR SIMULATION, Vol. 0, Num. 0, Page 1-13, March 2024,

Seyed Shahab Eshaghinia, Afshin Taghvaeipour, Mohammad Mohammadi Aghdam, Hassan Rivaz, "On the soft tissue ultrasound elastography using FEM based inversion approach", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, Vol. 0, Num. 0, Page 1-17, January 2024,

Reza Nopour Hollari, Afshin Taghvaeipour, Mohammad Mohammadi Aghdam, Francisco Gonzalez, "On the generalized Bézier-based integration approach for co-simulation applications", MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, Vol. 0, Num. 0, Page 0-0, August 2023,

Mohammad Khoshnazar, Mohammad Dastranj, Ali Azimi, Mohammad Mohammadi Aghdam, Paulo Flores, "Application of the Bezier integration technique with enhanced stability in forward dynamics of constrained multibody systems with Baumgarte stabilization method", ENGINEERING WITH COMPUTERS, Vol. 0, Num. 0, Page 1-15, August 2023,

Fatemeh Abedini, Reza Hedayati, Mohammad Mohammadi Aghdam, Mojtaba Sadighi, "Thermomechanical behavior of lattice structures: An analytical, numerical, and experimental study", MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, Vol. 51, Num. 5, Page 1-24, May 2023,

Maysam Alinia, Reza Nopour Hollari, Mohammad Mohammadi Aghdam, Reza Hedayati, "The effect of auxeticity on the vibration of conical sandwich shells with ring support under various boundary conditions", ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS, Vol. 152, Num. 0, Page 130-147, April 2023,

Ali Fallah, Mohammad Mohammadi Aghdam, "Physics-informed neural network for bending and free vibration analysis of three-dimensional functionally graded porous beam resting on elastic foundation", ENGINEERING WITH COMPUTERS, Vol. 0, Num. 0, Page 1-18, March 2023,

Peyman Moradweysi, P. M. Santucci, Georgio Carta, Taha Goudarzi, Mohammad Mohammadi Aghdam, A. Baldi, M. Brun, "Design and analysis of a thick Miura-ori folded structure with large negative Poissons ratio", MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, Vol. 29, Num. 25, Page 1-19, October 2022,

Hesamaldin Zamani, S.Salman Nourazar Khoshknab, Mohammad Mohammadi Aghdam, "Large-amplitude vibration and buckling analysis of foam beams on nonlinear elastic foundations", MECHANICS OF TIME-DEPENDENT MATERIALS, Vol. 0, Num. 0, Page 1-18, September 2022,

Faezeh Eskandari, Mahdi Shafieian, Mohammad Mohammadi Aghdam, Kaveh Laksari, "Morphological changes in glial cells arrangement under mechanical loading: A quantitative study", INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED, Vol. 53, Num. 11, Page 3617-3623, August 2022,

Reza Hedayati, Yahya Sheikhnejad, Mohammad Mohammadi Aghdam, "Editorial to the Special Issue on Advanced Micro/Nanoscale Porous Materials for Novel Applications: Answering to Future Needs", TRANSPORT IN POROUS MEDIA, Vol. 142, Num. 0, Page 1-4, March 2022,

Sahmani, Saeed Saber Samandari, Mohammad Mohammadi Aghdam, Khandan, "Microstructural properties of novel nanocomposite material based on hydroxyapatite and carbon nanotubes: fabrication and nonlinear instability simulation", Journal of Nanostructure in Chemistry, Vol. 12, Num. 1, Page 1-22, March 2022,

Ali Khalvandi, Mohammad Mohammadi Aghdam, Saeed Saber Samandari, "Fabrication, experimental study and 2-D finite element computational homogenization of bone scaffolds under uniaxial and biaxial compressive loadings??????", JOURNAL OF NANOMATERIALS NANOENGINEERING AND NANOSYSTEMS - Proc IMechE Part N, Vol. 20, Num. 1, Page 1-22, March 2022,

Ali Khalvandi, Saeed Saber Samandari, Mohammad Mohammadi Aghdam, "Application of artificial neural networks to predict Youngs moduli of cartilage scaffolds: An in-vitro and micromechanical studyf", Biomaterials Advances, Vol. 136, Num. 1, Page 1-17, March 2022,

Reza Nopour Hollari, Farzad Ebrahimi, Ali Dabbagh, Mohammad Mohammadi Aghdam, "Nonlinear forced vibrations of three?phase nanocomposite shells considering matrix rheological behavior and nano?fber waviness", ENGINEERING WITH COMPUTERS, Vol. 0, Num. 0, Page 1-18, February 2022,

Lazreg Hadhi , Ali Fallah, Mohammad Mohammadi Aghdam, "Influence of the distribution pattern of porosity on the free vibration of functionally graded plates", STRUCTURAL ENGINEERING AND MECHANICS, Vol. 82, Num. 2, Page 151-161, January 2022,

Hossein Kabir, Mohammad Mohammadi Aghdam, "A generalized 2D Bézier-based solution for stress analysis of notched epoxy resin plates reinforced with graphene nanoplatelets", THIN-WALLED STRUCTURES, Vol. 169, Num. 0, Page 1-6, October 2021,

Mohammad Mehdi Mobasheri Zafarabadi, Mohammad Mohammadi Aghdam, "Semi-analytical solutions for buckling and free vibration of composite anisogrid lattice cylindrical panels", COMPOSITE STRUCTURES, Vol. 275, Num. 0, Page 1-11, July 2021,

Hamid Salehi, Mahnaz Shamshirsaz, Mohammad Mohammadi Aghdam, "Investigation on modulation of multi-frequency ultrasonic waves in structures with quadratic nonlinearity", SMART STRUCTURES AND SYSTEMS, Vol. 28, Num. 1, Page 43-53, July 2021,

Ali Seyfi, Mohammad Mohammadi Aghdam, "Vibrational behavior of temperature-dependent imperfect functionally graded plate lying on an elastic substrate", MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, Vol. 0, Num. 0, Page 0-0, July 2021,

Sahmani, Khandan, Saeed Saber Samandari, Esmaeili, Mohammad Mohammadi Aghdam, "Fabrication and resonance simulation of 3D-printed biocomposite mesoporous implants with different periodic cellular topologies", Bioprinting, Vol. 22, Num. 1, Page 138-138, March 2021,

Hooman Danesh, Mahdi Javanbakht, Mohammad Mohammadi Aghdam, "A comparative study of 1D nonlocal integral Timoshenko beam and 2D nonlocal integral elasticity theories for bending of nanoscale", CONTINUUM MECHANICS AND THERMODYNAMICS, Vol. 0, Num. 0, Page 0-0, February 2021,

Hossein Soleimani, Taha Goudarzi, Mohammad Mohammadi Aghdam, "Advanced structural modeling of a fold in Origami/Kirigami inspired structures", THIN-WALLED STRUCTURES, Vol. 161, Num. 0, Page 1-22, February 2021,

Matin Mohammadzadeh, Saeed Saber Samandari, Mojtaba Sadighi, Tayebi, Mohammad Mohammadi Aghdam,, "Macro-and micromechanical modelling of HA-Elastin scaffold fabricated using freeze drying technique", JOURNAL OF NANOANALYSIS, Vol. 8, Num. 1, Page 1-15, February 2021,

Faezeh Eskandari, Mahdi Shafieian, Mohammad Mohammadi Aghdam, Kaveh Laksari, "Mind the gap: A mechanobiological hypothesis for the role of gap junctions in the mechanical properties of injured brain tissue", JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, Vol. 115, Num. 1, Page 1-6, November 2020,

Faezeh Eskandari, Mahdi Shafieian, Mohammad Mohammadi Aghdam, Kaveh Laksari, "The Importance of Axonal Directions in the Brainstem Injury during Neurosurgical Interventions", INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED, Vol. 51, Num. 10, Page 1-10, October 2020,

Faezeh Eskandari, Mahdi Shafieian, Mohammad Mohammadi Aghdam, Kaveh Laksari, "Structural Anisotropy vs. Mechanical Anisotropy: The Contribution of Axonal Fibers to the Material Properties of Brain White Matter", ANNALS OF BIOMEDICAL ENGINEERING, Vol. 48, Num. 10, Page 1-9, October 2020,

Faezeh Eskandari, Mahdi Shafieian, Mohammad Mohammadi Aghdam, Kaveh Laksari, "Tension Strain-Softening and Compression Strain-Stiffening Behavior of Brain White Matter", ANNALS OF BIOMEDICAL ENGINEERING, Vol. 48, Num. 0, Page 0-0, June 2020,

Mohsen Moeini, Reza Barbazesfahani, Saeed Saber Samandari, Mohammad Mohammadi Aghdam, "Molecular dynamics simulations of the effect of temperature and strain rate on mechanical properties of graphene–epoxy nanocomposites", MOLECULAR SIMULATION, Vol. 46, Num. 6, Page 476-486, May 2020,

Saeed Sahmani, , Saeed Saber Samandari, Mohammad Mohammadi Aghdam, "Effect of magnetite nanoparticles on the biological and mechanical properties of hydroxyapatite porous scaffolds coated with ibuprofen drug", MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, Vol. 111, Num. 1, Page 110835-110835, May 2020,

Faezeh Eskandari, Mahdi Shafieian, Mohammad Mohammadi Aghdam, Kaveh Laksari, "A knowledge map analysis of brain biomechanics: Current evidence and future directions", CLINICAL BIOMECHANICS, Vol. 75, Num. 0, Page 0-0, March 2020,

Naeim Ghavidelnia, Reza Hedayati, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, "Development of porous implants with non-uniform mechanical properties distribution based on CT images", APPLIED MATHEMATICAL MODELLING, Vol. 83, Num. 0, Page 801-823, March 2020,

Saeed Nouri, Saeid Sahmani, M. Asayesh, Mohammad Mohammadi Aghdam, "Microstructural characterization of YSZ-CoNiCrAlY two-layered thermal barrier coating formed on ?-TiAl intermetallic alloy via APS process", INTERMETALLICS, Vol. 118, Num. 0, Page 1-6, January 2020,

Alireza Adli, Karim Shalesh-Nezhad, Mohammad Reza Khoshravan Azar, Mohammad Mohammadi Aghdam, "The effect of vascular self-healing pattern on mechanical behavior and healing performance of epoxy/glass composite", PLASTICS RUBBER AND COMPOSITES, Vol. 49, Num. 2, Page 79-90, December 2019,

Saeed Nouri, Saeid Sahmani, M. Asayesh, Mohammad Mohammadi Aghdam, "Improvement of high-temperature oxidation resistance of ?-TiAl intermetallic alloy by YSZ-NiCoCrAlY coating using APS process", Materials Research Express, Vol. 6, Num. 12, Page 1-8, November 2019,

Samaneh Saber-Samandari, Mohammad Mohammadi Aghdam, Saeed Saber Samandari, "A novel magnetic bifunctional nanocomposite scaffold for photothermal therapy and tissue engineering", INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, Vol. 138, Num. 1, Page 810-818, October 2019,

Saeid Sahmani, A. Khandan, E. Esmaeili, Saeed Saber Samandari, M.Ghadiri Nejad, Mohammad Mohammadi Aghdam, "Calcium phosphate-PLA scaffolds fabricated by fusion deposition modelling technique for bone tissue applications: Fabrication, characterization and simulation", CERAMICS INTERNATIONAL, Vol. 46, Num. 0, Page 2447-2456, September 2019,

Saeed Nouri, Saeid Sahmani, M. Asayesh, Mohammad Mohammadi Aghdam, "Study on the oxidation resistance of ?-TiAl intermetallic alloy coated via different diffusion coating processes", Materials Research Express, Vol. 6, Num. 10, Page 1-12, August 2019,

Narges Mohammadi, Hamed Asadi, Mohammad Mohammadi Aghdam, "An efficient solver for fully coupled solution of interaction between incompressible fluid flow and nanocomposite truncated conical shells", COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, Vol. 351, Num. 0, Page 478-500, July 2019,

Saeid Sahmani, Mohammad Mohammadi Aghdam, "Nonlocal electrothermomechanical instability of temperature-dependent FGM nanopanels with piezoelectric facesheets", Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, Vol. 43, Num. 0, Page 579-593, July 2019,

Yasin Heydarpour, Mohammad Mohammadi Aghdam, "A new multi-step technique based on the non-uniform rational basis spline curves for non-linear transient heat transfer analysis of functionally graded truncated cone", HEAT TRANSFER ENGINEERING, Vol. 40, Num. 7, Page 588-603, April 2019,

Saeed Sahmani, Saeed Saber Samandari, Amirsalar Khandan, Mohammad Mohammadi Aghdam, "Influence of MgO nanoparticles on the mechanical properties of coated hydroxyapatite nanocomposite scaffolds produced via space holder technique: Fabrication, characterization and simulation", JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, Vol. 95, Num. 0, Page 76-88, March 2019,

Saeid Sahmani, Mohammad Fotouhi, Mohammad Mohammadi Aghdam, "Size-dependent nonlinear secondary resonance of micro-/nano-beams made of nano-porous biomaterials including truncated cube cells", ACTA MECHANICA, Vol. 230, Num. 3, Page 1077-1103, March 2019,

Saeed Sahmani, Shahali, Ghadirinejad, Amirsalar Khandan, Mohammad Mohammadi Aghdam, Saeed Saber Samandari, "Effect of copper oxide nanoparticles on electrical conductivity and cell viability of calcium phosphate scaffolds with improved mechanical strength for bone tissue engineering", The European Physical Journal Plus, Vol. 134, Num. 0, Page 7-18, January 2019,

Hossein Kabir, Mohammad Mohammadi Aghdam, "A robust Bézier based solution for nonlinear vibration and post-buckling of random checkerboard graphene nano-platelets reinforced composite beams", COMPOSITE STRUCTURES, Vol. 212, Num. 0, Page 184-198, January 2019,

Saeid Talebi, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, "Numerical and experimental analysis of the closed-cell aluminium foam under low velocity impact using computerized tomography technique", ACTA MECHANICA SINICA, Vol. 34, Num. 6, Page 1-12, November 2018,

Saeed Sahmani, Saeed Saber Samandari, Mohammad Mohammadi Aghdam, Amirsalar Khandan, "Nonlinear resonance response of porous beam type implants corresponding to various morphology shapes for bone tissue engineering applications", JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 27, Num. 10, Page 5370-5383, November 2018,

M.M. Keleshteri, Hamed Asadi, Mohammad Mohammadi Aghdam, "Nonlinear bending analysis of FG-CNTRC annular plates with variable thickness on elastic foundation", THIN-WALLED STRUCTURES, Vol. 135, Num. 0, Page 453-462, November 2018,

Amirhosein Ghorbanpour Arani, Mohammad Mohammadi Aghdam, M. J. Saeeidian, "Wave Propagation Analysis of CNT Reinforced Composite Micro-Tube Conveying Viscose Fluid in Visco-Pasternak Foundation Under 2D Multi-Physical Fields", Journal of Solid Mechanics, Vol. 10, Num. 2, Page 232-248, November 2018,

Saeed Sahmani, Saeed Saber Samandari, Amirsalar Khandan, Mohammad Mohammadi Aghdam, "Nonlinear resonance investigation of nanoclay based bionanocomposite scaffolds with enhanced properties for bone substitute applications", JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 773, Num. 1, Page 636-653, September 2018,

Ali Sarafraz, Saeid Sahmani, Mohammad Mohammadi Aghdam, "Nonlinear secondary resonance of nanobeams under subharmonic and superharmonic excitations including surface free energy effects", APPLIED MATHEMATICAL MODELLING, Vol. 66, Num. 0, Page 195-226, September 2018,

Saeed Sahmani, Saeed Saber Samandari, Mahin Shahali, Hamed Yekta, Aghadavoudi, Montazeran, Mohammad Mohammadi Aghdam, Amirsalar Khandan, "Mechanical and biological performance of axially bionanocomposite sandwich plate-type implant coated by biological polymer loaded novel thin film", JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, Vol. 88, Num. 1, Page 238-250, August 2018,

Reza Hedayati, Hossein Hosseini Toudeshky, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, Amir A Zadpoor, "Multiscale modeling of fatigue crack propagation in additively manufactured porous biomaterials", INTERNATIONAL JOURNAL OF FATIGUE, Vol. 113, Num. 0, Page 416-427, August 2018,

Saeed Sahmani, Mahin Shahali, Amirsalar Khandan, Saeed Saber Samandari, Mohammad Mohammadi Aghdam, "Analytical and experimental analyses for mechanical and biological characteristics of novel nanoclay bio-nanocomposite scaffolds fabricated via space holder technique", APPLIED CLAY SCIENCE, Vol. 165, Num. 1, Page 112-123, July 2018,

Saeid Sahmani, Amirsalar Khandan, Saeed Saber Samandari, Mohammad Mohammadi Aghdam, "Nonlinear bending and instability analysis of bioceramics composed with magnetite nanoparticles: Fabrication, characterization, and simulation", CERAMICS INTERNATIONAL, Vol. 44, Num. 8, Page 9540-9549, June 2018,

Saeid Sahmani, Mohammad Mohammadi Aghdam, Timon Rabczuk, "Nonlocal strain gradient plate model for nonlinear large-amplitude vibrations of functionally graded porous micro/nano-plates reinforced with GPLs", COMPOSITE STRUCTURES, Vol. 198, Num. 0, Page 51-62, May 2018,

Saeid Sahmani, Mohammad Mohammadi Aghdam, Timon Rabczuk, "A unified nonlocal strain gradient plate model for nonlinear axial instability of functionally graded porous micro/nano-plates reinforced with graphene platelets", Materials Research Express, Vol. 5, Num. 4, Page 45048-45069, April 2018,

Mehrdad Koloushani, Reza Hedayati, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, "CT-Based Micro-Mechanical Approach to Predict Response of Closed-Cell Porous Biomaterials to Low-Velocity Impact", JOURNAL OF IMAGING, Vol. 4, Num. 3, Page 1-15, March 2018,

Saeid Sahmani, Amirsalar Khandan, Saeed Saber Samandari, Mohammad Mohammadi Aghdam, "Vibrations of beam-type implants made of 3D printed bredigite-magnetite bio-nanocomposite scaffolds under axial compression: Application, communication and simulation", CERAMICS INTERNATIONAL, Vol. 44, Num. 10, Page 11282-11291, March 2018,

Saeid Sahmani, Mohammad Mohammadi Aghdam, "Thermo-electro-radial coupling nonlinear instability of piezoelectric shear deformable nanoshells via nonlocal elasticity theory", MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Vol. 24, Num. 2, Page 1333-1346, February 2018,

Pouria Hajikarimi, Fereidoon Moghadas Nejad, Mohammad Mohammadi Aghdam, "Implementing General Power Law to Interconvert Linear Viscoelastic Functions of Modified Asphalt Binders", JOURNAL OF TRANSPORTATION ENGINEERING PART B-PAVEMENTS, Vol. -, Num. 0, Page 0-0, February 2018,

Saeid Talebi, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, "The effect of impact energy parameters on the closed-cell aluminum foam crushing behavior using X-ray tomography method", AUT Journal of Mechanical Engineering, Vol. 2, Num. 1, Page 107-116, January 2018,

Saeid Sahmani, Mohammad Mohammadi Aghdam, Timon Rabczuk, "Nonlinear bending of functionally graded porous micro/nano-beams reinforced with graphene platelets based upon nonlocal strain gradient theory", COMPOSITE STRUCTURES, Vol. 186, Num. 0, Page 68-78, January 2018,

Saeid Sahmani, Mohammad Mohammadi Aghdam, "Nonlinear instability of hydrostatic pressurized microtubules surrounded by cytoplasm of a living cell including nonlocality and strain gradient microsize dependency", ACTA MECHANICA, Vol. 229, Num. 0, Page 403-420, January 2018,

Saeid Sahmani, Mohammad Mohammadi Aghdam, "Axial postbuckling analysis of multilayer functionally graded composite nanoplates reinforced with GPLs based on nonlocal strain gradient theory", The European Physical Journal Plus, Vol. 132, Num. 11, Page 490-507, November 2017,

Saeid Sahmani, Mohammad Mohammadi Aghdam, "Nonlocal strain gradient beam model for postbuckling and associated vibrational response of lipid supramolecular protein micro/nano-tubules", MATHEMATICAL BIOSCIENCES, Vol. 295, Num. 0, Page 24-35, November 2017,

Saeid Sahmani, Mohammad Mohammadi Aghdam, "Size-dependent nonlinear bending of micro/nano-beams made of nanoporous biomaterials including a refined truncated cube cell", PHYSICS LETTERS A, Vol. 381, Num. 45, Page 3818-3830, October 2017,

Saeid Sahmani, Mohammad Mohammadi Aghdam, "Nonlinear vibrations of pre- and post-buckled lipid supramolecular micro/nano-tubules via nonlocal strain gradient elasticity theory", JOURNAL OF BIOMECHANICS, Vol. 65, Num. 0, Page 49-60, October 2017,

Saeid Talebi, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, Seyed Mohammad H. Mirbagheri, "Micro-macro analysis of closed-aluminum foam with crushing behavior subjected to dynamic loadings", Materialstoday Communications, Vol. 13, Num. 13, Page 170-177, October 2017,

Saeid Sahmani, Mohammad Mohammadi Aghdam, "Nonlocal strain gradient shell model for axial buckling and postbuckling analysis of magneto-electro-elastic composite nanoshells", COMPOSITES PART B-ENGINEERING, Vol. 132, Num. 0, Page 258-274, September 2017,

Ali Fallah, M. T. Ahmadian, Mohammad Mohammadi Aghdam, "Rate-Dependent Behavior of Connective Tissue through a Micromechanics- Based Hyper Viscoelastic Model", INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, Vol. 121, Num. 0, Page 91-107, September 2017,

Hesamaldin Zamani, Mohammad Mohammadi Aghdam, Mojtaba Sadighi, "Free vibration analysis of thick viscoelastic composite plates on visco-Pasternak foundation using higher-order theory", COMPOSITE STRUCTURES, Vol. 182, Num. 0, Page 25-35, September 2017,

Saeid Sahmani, Mohammad Mohammadi Aghdam, Mohsen Bahrami, "An efficient size-dependent shear deformable shell model and molecular dynamics simulation for axial instability analysis of silicon nanoshells", JOURNAL OF MOLECULAR GRAPHICS & MODELLING, Vol. 77, Num. 0, Page 263-279, August 2017,

Heydarpour Y., Mohammad Mohammadi Aghdam, "Response of VSCL plates under moving load using a mixed integral-differential quadrature and novel NURBS based multi-step method", COMPOSITES PART B-ENGINEERING, Vol. 140, Num. 0, Page 260-280, August 2017,

Saeid Sahmani, Mohammad Mohammadi Aghdam, "Nonlocal strain gradient beam model for nonlinear vibration of prebuckled and postbuckled multilayer functionally graded GPLRC nanobeams", COMPOSITE STRUCTURES, Vol. 179, Num. 0, Page 77-88, July 2017,

Saeid Sahmani, Mohammad Mohammadi Aghdam, "A nonlocal strain gradient hyperbolic shear deformable shell model for radial postbuckling analysis of functionally graded multilayer GPLRC nanoshells", COMPOSITE STRUCTURES, Vol. 178, Num. 0, Page 97-109, July 2017,

Saeid Sahmani, Mohammad Mohammadi Aghdam, "Nonlinear instability of axially loaded functionally graded multilayer graphene platelet-reinforced nanoshells based on nonlocal strain gradient elasticity theory", INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 131-132, Num. 0, Page 95-106, July 2017,

Saeid Sahmani, Mohammad Mohammadi Aghdam, "Boundary layer modeling of nonlinear axial buckling behavior of functionally graded cylindrical nanoshells based on the surface elasticity theory", Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, Vol. 42, Num. 3, Page 229-245, June 2017,

Saeid Sahmani, Mohammad Mohammadi Aghdam, "Size-dependent axial instability of microtubules surrounded by cytoplasm of a living cell based on nonlocal strain gradient elasticity theory", JOURNAL OF THEORETICAL BIOLOGY, Vol. 422, Num. 0, Page 59-71, April 2017,

Seyed Abdollah Sheikholeslami, Mohammad Mohammadi Aghdam, E. Zappino, E. Carrera, "Application of refined beam elements to the coupled-field analysis of magnetostrictive microbeams", COMPOSITES PART B-ENGINEERING, Vol. 115, Num. 0, Page 14-20, April 2017,

Yasin Heydarpour, Mohammad Mohammadi Aghdam, "A coupled integral-differential quadrature and B-spline based multi-step technique for transient analysis of VSCL plates", ACTA MECHANICA, Vol. 0, Num. 0, Page 1-22, April 2017,

Mohammad Mohammadzadeh Keleshteri, Hamed Asadi, Mohammad Mohammadi Aghdam, "Geometrical nonlinear free vibration responses of FG-CNT reinforced composite annular sector plates integrated with piezoelectric layers", COMPOSITE STRUCTURES, Vol. 171, Num. 0, Page 100-112, April 2017,

Ali Fallah, M. T. Ahmadian, K. Firozbakhsh, Mohammad Mohammadi Aghdam, "Micromechanical modeling of rate-dependent behavior of Connective tissues", JOURNAL OF THEORETICAL BIOLOGY, Vol. 416, Num. 0, Page 119-128, April 2017,

Mehdi Eynbeygi, Mohammad Mohammadi Aghdam, "On the micro-mechanical study of 1-3 type piezoelectric composites with semi-coupled thermo-electro-elastic effects", MECCANICA, Vol. 0, Num. 0, Page 1-19, March 2017,

Saeid Sahmani, Mohammad Mohammadi Aghdam, "Imperfection sensitivity of the size-dependent postbuckling response of pressurized FGM nanoshells in thermal environments", ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 17, Num. 0, Page 623-638, February 2017,

Saeid Sahmani, Mohammad Mohammadi Aghdam, Mohsen Bahrami, "Nonlinear buckling and postbuckling behavior of cylindrical shear deformable nanoshells subjected to radial compression including surface free energy effects", ACTA MECHANICA SOLIDA SINICA, Vol. 30, Num. 0, Page 209-222, February 2017,

Hesamaldin Zamani, Mohammad Mohammadi Aghdam, Manouchehr Salehi, "Free damped vibration analysis of Mindlin plates with hybrid material-foundation viscoelasticity", INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 121, Num. 0, Page 33-43, February 2017,

Mohammad Mohammadi Aghdam, S. R. Morsali, Seyed Mohammad Amin Hosseini, Mojtaba Sadighi, "Mechanical Behavior of Unidirectional SiC/Ti Composites subjected to off-axis loading at Elevated Temperatures", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 688, Num. 0, Page 244-249, February 2017,

Reza Hedayati, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, Hossein Hosseini Toudeshky, "Comparison of elastic properties of open?cell metallic biomaterials with different unit cell types", JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, Vol. 0, Num. 0, Page 1-13, February 2017,

Reza Hedayati, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, Zadpoor A. A., "Analytical relationships for the mechanical properties of additively manufactured porous biomaterials based on octahedral unit cells", APPLIED MATHEMATICAL MODELLING, Vol. 46, Num. 0, Page 408-422, February 2017,

Saeid Sahmani, Mohammad Mohammadi Aghdam, "Size dependency in axial postbuckling behavior of hybrid FGM exponential shear deformable nanoshells based on the nonlocal elasticity theory", COMPOSITE STRUCTURES, Vol. 166, Num. 0, Page 104-113, February 2017,

Saeid Sahmani, Mohammad Mohammadi Aghdam, "Nonlinear instability of hydrostatic pressurized hybrid FGM exponential shear deformable nanoshells based on nonlocal continuum elasticity", COMPOSITES PART B-ENGINEERING, Vol. 114, Num. 0, Page 404-417, January 2017,

Saeid Sahmani, Mohammad Mohammadi Aghdam, "Temperature-dependent nonlocal instability of hybrid FGM exponential shear deformable nanoshells including imperfection sensitivity", INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 122, Num. 0, Page 129-142, January 2017,

Reza Hedayati, Shahram Janbaz, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, Amir Abbas Zadpoor, "How does tissue regeneration influence the mechanical behavior of additively manufactured porous biomaterials?", JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, Vol. 65, Num. 0, Page 831-841, October 2016,

Reza Hedayati, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, Amir Abbas Zadpoor, "Mechanical Properties of Additively Manufactured Thick Honeycombs", Materials, Vol. 9, Num. 8, Page 613-636, August 2016,

Reza Hedayati, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, Amir Abbas Zadpoor, "Mechanical properties of additively manufactured octagonal honeycombs", MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, Vol. 69, Num. 0, Page 1307-1317, August 2016,

Yasin Heydarpour, Mohammad Mohammadi Aghdam, "A novel hybrid Bezier based multi-step and differential quadrature method for analysis of rotating FG conical shells under thermal shock", COMPOSITES PART B-ENGINEERING, Vol. 97, Num. 0, Page 120-140, July 2016,

Yasin Heydarpour, Mohammad Mohammadi Aghdam, "A hybrid Bézier based multi-step method and differential quadrature for 3D transient response of variable stiffness composite plates", COMPOSITE STRUCTURES, Vol. 154, Num. 0, Page 344-359, July 2016,

100

Saeid Sahmani, Mohammad Mohammadi Aghdam, Mohsen Bahrami, "Surface free energy effects on the postbuckling behavior of cylindrical shear deformable nanoshells under combined axial and radial compressions", MECCANICA, Vol. 0, Num. 0, Page 1-24, June 2016,

101

Saeid Sahmani, Mohammad Mohammadi Aghdam, A.H. Akbarzadeh, "Size-dependent buckling and postbuckling behavior of piezoelectric cylindrical nanoshells subjected to compression and electrical load", MATERIALS & DESIGN, Vol. 105, Num. 0, Page 341-351, May 2016,

102

Yasin Heydarpour, Mohammad Mohammadi Aghdam, "Transient analysis of rotating functionally graded truncated conical shells based on the Lord–Shulman model", THIN-WALLED STRUCTURES, Vol. 104, Num. 0, Page 168-184, March 2016,

103

Mohammad Mohammadi Aghdam, Seyedreza Morsali, "Effects of manufacturing environments on the residual stresses in a SiC/Ti metal-matrix composite", SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, Vol. 0, Num. 0, Page 1-8, February 2016,

104

Reza Hedayati, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, Amir Abbas Zadpoor, "Mechanical properties of regular porous biomaterials made from truncated cube repeating unit cells: Analytical solutions and computational models", MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, Vol. 60, Num. 0, Page 163-183, February 2016,

105

Saeid Sahmani, Mohammad Mohammadi Aghdam, Mohsen Bahrami, "Size-dependent axialbucklingandpostbucklingcharacteristics of cylindricalnanoshellsindifferenttemperatures", INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 107, Num. 0, Page 170-179, January 2016,

106

A. Fallah, M.T. Ahmadian, K. Firozbakhsh, Mohammad Mohammadi Aghdam, "Micromechanics and Constitutive Modeling of Connective Soft Tissues", JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, Vol. 60, Num. 0, Page 157-176, January 2016,

107

Hesamaldin Zamani, Mohammad Mohammadi Aghdam, "Hybrid material and foundation damping of Timoshenko beams", JOURNAL OF VIBRATION AND CONTROL, Vol. 0, Num. 0, Page 1-19, January 2016,

108

Reza Hedayati, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, Amir Abbas Zadpoor, "Effect of mass multiple counting on the elastic properties of open-cell regular porous biomaterials", MATERIALS & DESIGN, Vol. 89, Num. 0, Page 9-20, January 2016,

109

Meitham Amereh Bozchalouee, Mohammad Mohammadi Aghdam, Mahdi Golkaram, "Design and modeling of a novel translational and angular micro-electromechanical accelerometer", AEROSPACE SCIENCE AND TECHNOLOGY, Vol. 50, Num. 0, Page 15-24, January 2016,

110

Reza Hedayati, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, Amir Abbas Zadpoor, "Mechanics of additively manufactured porous biomaterials based on the rhombicuboctahedron unit cell", JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, Vol. 53, Num. 0, Page 272-294, December 2015,

111

Reza Hedayati, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, Amir Abbas Zadpoor, "Mechanical behavior of additively manufactured porous biomaterials made from truncated cuboctahedron unit cells", INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 106, Num. 0, Page 19-38, December 2015,

112

Reza Hedayati, Hossein Hosseini Toudeshky, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, Amir Abbas Zadpoor, "Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials", INTERNATIONAL JOURNAL OF FATIGUE, Vol. 84, Num. 0, Page 67-79, December 2015,

113

Alireza Daman Pak Moghaddam, Mahdi Bodaghi, Liao, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "A simple and efficient 1-D macroscopic model for shape memory alloys considering ferro-elasticity effect", SMART STRUCTURES AND SYSTEMS, Vol. 16, Num. 4, Page 641-665, November 2015,

114

Isa Ahmadi, Mohammad Mohammadi Aghdam, "Elasto-Plastic MLPG Method for Micromechanical Modeling of Heterogeneous Materials", CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, Vol. 108, Num. 1, Page 21-48, November 2015,

115

Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Micromechanics of shape memory alloy fiber-reinforced composites subjected to multi-axial non-proportional loadings", JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 26, Num. 18, Page 2431-2445, November 2015,

116

Saeid Sahmani, Mohsen Bahrami, Mohammad Mohammadi Aghdam, "Surface stress effects on the nonlinear postbuckling characteristics of geometrically imperfect cylindrical nanoshells subjected to axial compression", INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, Vol. 99, Num. 0, Page 92-106, October 2015,

117

Saeid Sahmani, Mohsen Bahrami, Mohammad Mohammadi Aghdam, "Surface stress effects on the nonlinear postbuckling characteristics of geometrically imperfect cylindrical nanoshells subjected to torsional load", COMPOSITES PART B-ENGINEERING, Vol. 84, Num. 0, Page 140-154, September 2015,

118

Mahdi Bodaghi, Alireza Daman Pak Moghaddam, Liao, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Modeling and analysis of reversible shape memory adaptive panels", JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 0, Num. 0, Page 1-26, August 2015,

119

Saeid Sahmani, Mohsen Bahrami, Mohammad Mohammadi Aghdam, "Surface stress effects on the postbuckling behavior of geometrically imperfect cylindrical nanoshells subjected to combined axial and radial compressions", INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 100, Num. 0, Page 1-22, June 2015,

120

Saeid Sahmani, Mohsen Bahrami, Mohammad Mohammadi Aghdam, Reza Ansari, "Postbuckling behavior of circular higher-order shear deformable nanoplates including surface energy effects", APPLIED MATHEMATICAL MODELLING, Vol. 39, Num. 13, Page 3678-3689, June 2015,

121

Alireza Daman Pak Moghaddam, W.H. Liao, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, Mahdi Bodaghi, "Micro–macro thermo-mechanical analysis of axisymmetric shape memory alloy composite cylinders", COMPOSITE STRUCTURES, Vol. 131, Num. 0, Page 1001-1016, June 2015,

122

Mehdi Eynbeygi, Mohammad Mohammadi Aghdam, "A micromechanical study on the electro-elastic behavior of piezoelectric fiber-reinforced composites using the element-free Galerkin method", ACTA MECHANICA, Vol. 0, Num. 0, Page 1-18, May 2015,

123

Saeid Sahmani, Mohammad Mohammadi Aghdam, Mohsen Bahrami, "On the postbuckling behavior of geometrically imperfect cylindrical nanoshells subjected to radial compression including surface stress effects", COMPOSITE STRUCTURES, Vol. 131, Num. 0, Page 414-424, May 2015,

124

Saeid Sahmani, Mohammad Mohammadi Aghdam, Mohsen Bahrami, "Nonlinear buckling and postbuckling behavior of cylindrical nanoshells subjected to combined axial and radial compressions incorporating surface stress effects", COMPOSITES PART B-ENGINEERING, Vol. 79, Num. 0, Page 676-691, May 2015,

125

Mohammad Mohammadi Aghdam, Seyed Mohammad Amin Hosseini, Seyedreza Morsali, "Simulation of interface damage in metal matrix composites under off-axis loading using cohesive zone model", COMPUTATIONAL MATERIALS SCIENCE, Vol. 108, Num. 0, Page 42-47, May 2015,

126

Hamed Asadi, A. H. Akbarzadeh, Z. T. Chen, Mohammad Mohammadi Aghdam, "Enhanced thermal stability of functionally graded sandwich cylindrical shells by shape memory alloys", SMART MATERIALS & STRUCTURES, Vol. 24, Num. 4, Page 1-14, March 2015,

127

Hamed Asadi, Yasser Kiani Harchegani, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Enhanced thermal buckling of laminated composite cylindrical shells with shape memory alloy", JOURNAL OF COMPOSITE MATERIALS, Vol. 0, Num. 0, Page 1-14, February 2015,

128

Mahdi Bodaghi, Mahmoud Shakeri, Mohammad Mohammadi Aghdam, "Passive vibration control of plate structures using shape memory alloy ribbons", JOURNAL OF VIBRATION AND CONTROL, Vol. 0, Num. 0, Page 1-20, January 2015,

129

Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Micromechanics of Shape Memory Alloy Fiber-reinforced Composites Subjected to Multi-axial Non-proportional Loadings", JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 0, Num. 0, Page 1-15, November 2014,

130

Saeid Sahmani, Mohammad Mohammadi Aghdam, Mohsen Bahrami, "On the free vibration characteristics of postbuckled third-order shear deformable FGM nanobeams including surface effects", COMPOSITE STRUCTURES, Vol. 121, Num. 0, Page 377-385, November 2014,

131

Mahdi Bodaghi, Mahmoud Shakeri, Mohammad Mohammadi Aghdam, "Thermo-mechanical behavior of shape adaptive composite plates with surface-bonded shape memory alloy ribbons", COMPOSITE STRUCTURES, Vol. 119, Num. 0, Page 115-133, September 2014,

132

Hamed Niknamjahromi, Mohammad Mohammadi Aghdam, "A semi analytical approach for large amplitude free vibration and buckling of nonlocal FG beams resting on elastic foundation", COMPOSITE STRUCTURES, Vol. 119, Num. 0, Page 452-462, September 2014,

133

Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Micro-mechanics of Composite with SMA Fibers Embedded in Metallic/Polymeric Matrix Under Off-axial Loadings", EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 49, Num. 0, Page 467-480, September 2014,

134

Miralireza Seyedkanani, Hamed Niknamjahromi, Abdolreza Ohadi Hamadani, Mohammad Mohammadi Aghdam, "Effect of nonlinear elastic foundation on large amplitude free and forced vibration of functionally graded beam", COMPOSITE STRUCTURES, Vol. 115, Num. 0, Page 60-68, August 2014,

135

Yasin Heydarpour, Mohammad Mohammadi Aghdam, Pirooz Malekzadeh, "Free vibration analysis of rotating functionally graded carbon nanotube-reinforced composite truncated conical shells", COMPOSITE STRUCTURES, Vol. 117, Num. 0, Page 187-200, July 2014,

136

Saeid Sahmani, Mohsen Bahrami, Mohammad Mohammadi Aghdam, Reza Ansari, "Surface effects on the nonlinear forced vibration response of third-order shear deformable nanobeams", COMPOSITE STRUCTURES, Vol. 118, Num. 0, Page 149-158, July 2014,

137

Hesamaldin Zamani, Mahdi Bodaghi, Mohammad Mohammadi Aghdam, Manouchehr Salehi, "Accurate Damping Analysis of Viscoelastic Composite Beams and Plates on Suppressive Foundation", JOURNAL OF COMPOSITE MATERIALS, Vol. 0, Num. 0, Page 0-0, July 2014,

138

Mehdi Eynbeygi, Mohammad Mohammadi Aghdam, "A micromechanical study on the electro-elastic behavior of piezoelectric fibrous composites using element free Galerkin method", , Vol. 14, Num. 6, Page 175-184, July 2014,

139

Hamed Niknamjahromi, Ali Fallah, Mohammad Mohammadi Aghdam, "Nonlinear bending of functionally graded tapered beams subjected to thermal and mechanical loading", INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Vol. 65, Num. 0, Page 141-147, June 2014,

140

Alireza Daman Pak Moghaddam, Mahdi Bodaghi, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Shape Control of Shape Memory Alloy Composite Beams in the Post-buckling Regime", AEROSPACE SCIENCE AND TECHNOLOGY, Vol. 0, Num. 0, Page 0-0, June 2014,

141

Marjan Akbari Beni, Yasser Kiani Harchegani, Mohammad Mohammadi Aghdam, Mohammad Reza Eslami, "Free vibration of FGM Lévy conical panels", COMPOSITE STRUCTURES, Vol. 116, Num. 0, Page 732-746, June 2014,

142

Hamed Asadi, Mahdi Bodaghi, Mahmoud Shakeri, Mohammad Mohammadi Aghdam, "Nonlinear Dynamics of SMA Fibers Reinforced Composite Beams Subjected to a Primary/Secondary- Resonance Excitation", ACTA MECHANICA, Vol. 0, Num. 0, Page 0-0, June 2014,

143

Mohammad Mohammadi Aghdam, Seyedreza Morsali, "Effects of manufacturing parameters on residual stresses in SiC/Ti composites by an elastic–viscoplastic micromechanical model", COMPUTATIONAL MATERIALS SCIENCE, Vol. 91, Num. 0, Page 62-67, May 2014,

144

Mahdi Bodaghi, Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "A robust three-dimensional phenomenological model for polycrystalline SMAs: Analytical closed-form solutions", INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, Vol. 82, Num. 0, Page 1-21, May 2014,

145

Mehdi Saeed Kiasat, Hesamaldin Zamani, Mohammad Mohammadi Aghdam, "On the transient response of viscoelastic beams and plates on viscoelastic medium", INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 83, Num. 2014, Page 133-145, April 2014,

146

Alireza Daman Pak Moghaddam, Mahdi Bodaghi, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "On the vibration control capability of shape memory alloy composite beams", COMPOSITE STRUCTURES, Vol. 110, Num. 1, Page 325-334, January 2014,

147

Mohammad Mohammadi Aghdam, Milad Shahbaz, "Effects of Interphase Damage and Residual Stresses on Mechanical Behavior of Particle Reinforced Metal-Matrix Composites", APPLIED COMPOSITE MATERIALS, Vol. 0, Num. 0, Page 0-0, November 2013,

148

Reza Hedayati, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, "On the difference of pressure readings from the numerical, experimental and theoretical results in different bird strike studies", AEROSPACE SCIENCE AND TECHNOLOGY, Vol. 0, Num. 0, Page 0-0, November 2013,

149

Hamed Asadi, Mohammad Mohammadi Aghdam, "Large amplitude vibration and post-buckling analysis of variable cross-section composite beams on nonlinear elastic foundation", INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 0, Num. 0, Page 0-0, November 2013,

150

Mahdi Bodaghi, Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Active shape/stress control of shape memory alloy laminated beams", COMPOSITES PART B-ENGINEERING, Vol. 56, Num. 0, Page 889-899, October 2013,

151

Hamed Asadi, Mahdi Bodaghi, Mahmoud Shakeri, Mohammad Mohammadi Aghdam, "On the free vibration of thermally pre/post-buckled shear deformable SMA hybrid composite beams", AEROSPACE SCIENCE AND TECHNOLOGY, Vol. 31, Num. 1, Page 73-86, September 2013,

152

Mahdi Bodaghi, Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "A phenomenological SMA model for combined axial-torsional proportional/non-proportional loading conditions", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 587, Num. 0, Page 12-26, August 2013,

153

Hamed Asadi, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Vibration analysis of axially moving line supported functionally graded plates with temperature-dependent properties", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 0, Num. 0, Page 0-0, July 2013,

154

Mohammad Mohammadi Aghdam, Seyedreza Morsali, "Damage initiation and collapse behavior of unidirectional metal matrix composites at elevated temperatures", COMPUTATIONAL MATERIALS SCIENCE, Vol. 79, Num. 1, Page 402-407, July 2013,

155

Yasin Heydarpour, Dr. P. Malekzadeh, Mohammad Mohammadi Aghdam, "Free vibration of functionally graded truncated conical shells under internal pressure", MECCANICA, Vol. 0, Num. 0, Page 0-0, July 2013,

156

Mahdi Bodaghi, Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Geometrically non-linear transient thermo-elastic response of FG beams integrated with a pair of FG piezoelectric sensors", COMPOSITE STRUCTURES, Vol. 107, Num. 1, Page 48-59, July 2013,

157

Hamed Asadi, Mahdi Bodaghi, Mahmoud Shakeri, Mohammad Mohammadi Aghdam, "An analytical approach for nonlinear vibration and thermal stability of shape memory alloy hybrid laminated composite beams", EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 42, Num. 0, Page 454-468, July 2013,

158

Hamed Niknamjahromi, Mohammad Mohammadi Aghdam, Ali Fallah, "Free vibration analysis of Mindlin plates partially resting on Pasternak foundation", INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 75, Num. 1, Page 1-7, July 2013,

159

Fatemeh Mousazadegan, Siamak Saharkhiz, Masoud Latifi, Mohammad Mohammadi Aghdam, "Seam Pucker Rating by Deconvolution Residual Method", INTERNATIONAL JOURNAL OF CLOTHING SCIENCE AND TECHNOLOGY, Vol. 25, Num. 3, Page 150-170, May 2013,

160

Alireza Daman Pak Moghaddam, Mahmoud Shakeri, Mohammad Mohammadi Aghdam, "A new finite element model for low-velocity impact analysis of sandwich beams subjected to multiple projectiles", COMPOSITE STRUCTURES, Vol. 104, Num. 1, Page 21-33, April 2013,

161

Alireza Daman Pak Moghaddam, Mahdi Bodaghi, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Active control of geometrically non-linear transient response of sandwich beams with a flexible core using piezoelectric patches", COMPOSITE STRUCTURES, Vol. 100, Num. 0, Page 517-531, February 2013,

162

Ali Fallah, Mohammad Mohammadi Aghdam, "Large Amplitude Free Vibration and Post Buckling Analysis of Asymmetrically Laminated Beams on Pasternak Foundation", Nonlinear Engineering-Modeling and Application(NLENG), Vol. 1, Num. 1, Page 35-48, November 2012,

163

Mahdi Golkaram, Mohammad Mohammadi Aghdam, "Free transverse vibration analysis of thin rectangular plates locally suspended on elastic beam", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 0, Num. 0, Page 0-0, September 2012,

164

Mahdi Bodaghi, Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Nonlinear active control of FG beams in thermal environments subjected to blast loads with integrated FGP sensor/actuator layers", COMPOSITE STRUCTURES, Vol. 94, Num. 10, Page 3612-3623, July 2012,

165

Mohammad Bayat, Mohammad Mohammadi Aghdam, "A micromechanics based analysis of hollow fiber composites using DQEM", COMPOSITES PART B-ENGINEERING, Vol. 0, Num. 0, Page 0-0, June 2012,

166

Ali Fallah, Mohammad Mohammadi Aghdam, M. H. Kargarnovin, "Free vibration analysis of moderately thick functionally graded plates on elastic foundation using the extended Kantorovich method", ARCHIVE OF APPLIED MECHANICS, Vol. 0, Num. 0, Page 0-0, May 2012,

167

Ehsan Ameri, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Global optimization of laminated cylindrical panels based on fundamental natural frequency", COMPOSITE STRUCTURES, Vol. 0, Num. 0, Page 0-0, April 2012,

168

Mohammad Bayat, Mohammad Mohammadi Aghdam, "MICROMECHANICAL ANALYSIS OF UNIDIRECTIONAL COMPOSITES USING A LEAST-SQUARES-BASED DIFFERENTIAL QUADRATURE ELEMENT METHOD", JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES, Vol. 7, Num. 2, Page 119-135, April 2012,

169

Mahdi Zamani, Ali Fallah, Mohammad Mohammadi Aghdam, "Free vibration analysis of moderately thick trapezoidal symmetrically laminated plates with various combinations of boundary conditions", EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 36, Num. 0, Page 204-212, March 2012,

170

Mohammad Bayat, Mohammad Mohammadi Aghdam, "A micromechanics-based analysis of effects of square and hexagonal fiber arrays in fibrous composites using DQEM", EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 32, Num. 1, Page 32-40, January 2012,

171

Ali Fallah, Mohammad Mohammadi Aghdam, "Thermo-mechanical buckling and nonlinear free vibration analysis of functionally graded beams on nonlinear elastic foundation", COMPOSITES PART B-ENGINEERING, Vol. 0, Num. 0, Page 0-0, October 2011,

172

M. J. Mahmoodi, Mohammad Mohammadi Aghdam, "Damage analysis of fiber reinforced Ti-alloy subjected to multi–axial loading – A Micromechanical approach", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 528, Num. 27, Page 7983-7990, August 2011,

173

Ali Fallah, Mohammad Mohammadi Aghdam, "Nonlinear free vibration and post-buckling analysis of functionally graded beams on nonlinear elastic foundation", EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 30, Num. 4, Page 571-583, May 2011,

174

Sattar Maleki, Atieh Andakhshideh, Mohammad Mohammadi Aghdam, "Bending Analysis of Moderately Thick Laminated Conical Panels With Various Boundary Conditions", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 225, Num. 6, Page 1291-1300, May 2011,

175

Sabah Nobakhti, Mohammad Mohammadi Aghdam, "Static analysis of rectangular thick plates resting on two-parameter elastic boundary strips", EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 30, Num. 3, Page 442-448, March 2011,

176

Isa Ahmadi, Mohammad Mohammadi Aghdam, "Heat transfer in composite materials using a new truly local meshless method", INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, Vol. 21, Num. 3, Page 293-309, March 2011,

177

Ali Fallah, M.H. Kargarnovin, Mohammad Mohammadi Aghdam, "Free vibration analysis of symmetrically laminated fully clamped skew plates using extended Kantorovich method", Key Engineering Materials, Vol. 471, Num. 1, Page 739-744, February 2011,

178

Ali Fallah, Hamid Shahsavari, A. Pasharavesh, Mohammad Mohammadi Aghdam, "Large amplitude thermo-mechanical vibration analysis of symmetrically laminated composite beams", Key Engineering Materials, Vol. 471, Num. 1, Page 745-750, February 2011,

179

Nematallah Mardani Mehrabad, Majid Safar Johari, Mohammad Mohammadi Aghdam, "Using Finite- Element Method for Analyzing the Effect of Coriolis Acceleration on the Ring- Spinning Balloon", Chemical, Polymer and Material Science and Technology, Amirkabir, Vol. سال بیست و یکم, Num. 72, Page 93-98, February 2011,

180

Mohammad Mohammadi Aghdam, Nastaran Shahmansouri, Kasra Bigdeli, "Bending Analysis of Moderately Thick Functionally Graded Conical Panels", COMPOSITE STRUCTURES, Vol. 93, Num. 5, Page 1376-1384, February 2011,

181

Kasra Bigdeli, Mohammad Mohammadi Aghdam, "A SEMI ANALYTICAL SOLUTION FOR THE BENDING OF CLAMPED LAMINATED DOUBLY CURVED OR SPHERICAL PANELS", JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES, Vol. 5, Num. 6, Page 855-873, December 2010,

182

Isa Ahmadi, Mohammad Mohammadi Aghdam, "A Generalized Plane Strain Meshless Local Petrov-Galerkin Method for the Micromechanics of Thermomechanical Loading of Composites", Journal of Mechanics of Materials and Structures, Vol. 5, Num. 4, Page 0-0, November 2010,

183

Isa Ahmadi, Mohammad Mohammadi Aghdam, "A truly generalized plane strain meshless method for combined normal and shear loading of fibrous composites", Engineering Analysis With Boundary Elements, Vol. 0, Num. 0, Page 0-0, October 2010,

184

Sayed Reza Falahatgar, Manouchehr Salehi, Mohammad Mohammadi Aghdam, "Micro-Macro Analysis of Viscoelastic Unidirectional Laminated Composite Plates Using DR Method", Applied Composite Materials, Vol. 17, Num. 5, Page 0-0, October 2010,

185

Isa Ahmadi, Nasrin Sheikhi, Mohammad Mohammadi Aghdam, S.Salman Nourazar Khoshknab, "A new local meshless method for steady-state heat conduction in heterogeneous materials", ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS, Vol. 34, Num. 12, Page 1105-1112, September 2010,

186

Mohammad Mohammadi Aghdam, Nastaran Shahmansouri, Masoud Mohammadi, ". Extended Kantorovich method for static analysis of moderately thick functionally graded sector plates", Mathematics and Computers in Simulation, Vol. 0, Num. 0, Page 0-0, August 2010,

187

Mohammad Mohammadi Aghdam, Kasra Bigdeli, Nastaran Shahmansouri, "A Semi-Analytical Solution for Bending of Moderately Thick Doubly Curved Functionally Graded Panels", Mechanics of Advanced Materials and Structures, Vol. 17, Num. 5, Page 0-0, June 2010,

188

Mahdi Abkar, Pourya Forooghi, Abbas Abbassi, Mohammad Mohammadi Aghdam, "Heat transfer of non-Newtonian fluid flow in a channel lined with porous layers under thermal non-equilibrium condition", Journal of Porous Media, Vol. 13, Num. 3, Page 0-0, April 2010,

189

Hamid Reza Chamani, Iraj Sattari Far, Mohammad Mohammadi Aghdam, "A study on the thermal boundary condition effects on the distribution of temperature inside diesel engines", , Vol. 5, Num. 17, Page 71-81, February 2010,

190

Mohammad Javad Mahmoodi, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Micromechanical modeling of interface damage of metal matrix composites subjected to off-axis loading", , Vol. , Num. 31, Page 0-0, February 2010,

191

Isa Ahmadi, Mohammad Mohammadi Aghdam, "Micromechanics of Fibrous Composites Subjected to Combined Shear and Thermal loading using a Truly Meshless Method", Computational Mechanics, Vol. 0, Num. 0, Page 0-0, February 2010,

192

Isa Ahmadi, Mohammad Mohammadi Aghdam, "Analysis of micro-stresses in a SiC/Ti metal matrix composite using a truly local meshless method", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 224, Num. 0, Page 0-0, November 2009,

193

Mohammad Javad Mahmoodi, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "The effects of interfacial debonding on the elastoplastic response of unidirectional silicon carbide–titanium composites", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 224, Num. 2, Page 0-0, October 2009,

194

Nematallah Mardani Mehrabad, Majid Safar Johari, Mohammad Mohammadi Aghdam, "Finite-Element and Multivariate Analyses of Tension Distribution and Spinning Parameters Effects on the Ring-Spinning Balloon", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 224, Num. 2, Page 0-0, September 2009,

195

Mohammad Mohammadi Aghdam, Maysam Gorji Bandpay, Sayed Reza Falahatgar, "Interface damage of SiC/Ti metal matrix composites subjected to combined thermal and axial shear loading", , Vol. , Num. , Page 0-0, September 2009,

196

Atieh Andakhshideh, , Mohammad Mohammadi Aghdam, "Non-Linear Bending Analysis of Laminated Sector Plates Using Generalized Differential Quadrature", Composite Structures, Vol. 92, Num. 9, Page 0-0, September 2009,

197

Farbod Alijani, Mohammad Mohammadi Aghdam, "A semi-analytical solution for stress analysis of moderately thick laminated cylindrical panels with various boundary conditions", , Vol. , Num. 89, Page 0-0, August 2009,

198

Sayed Reza Falahatgar, Manouchehr Salehi, Mohammad Mohammadi Aghdam, "Nonlinear Viscoelastic Response of Unidirectional Fiber-Reinforced Composites in Off-Axis Loading", , Vol. , Num. 15, Page 0-0, May 2009,

199

Mohammad Mohammadi Aghdam, Masoud Mohammadi, "Bending analysis of thick orthotropic sector plates with various loading and boundary conditions", , Vol. , Num. 88, Page 0-0, April 2009,

200

Seyed Mahmoud Mousavi, Mohammad Mohammadi Aghdam, "Static Bending Analysis of Laminated Cylindrical Panels With Various Boundary Conditions Using The Differential Cubature Method", , Vol. , Num. 3, Page 0-0, March 2009,

201

Mohammad Mohammadi Aghdam, Sayed Reza Falahatgar, Maysam Gorji Bandpay, "Micromechanical consideration of interface damage in fiber reinforced Ti-alloy under various combined loading conditions", , Vol. , Num. 68, Page 0-0, December 2008,

202

Farbod Alijani, Mohammad Mohammadi Aghdam, Morteza Abouhamze, "Application of the extended Kantorovich method to the bending of clamped cylindrical panels", , Vol. , Num. 27, Page 0-0, May 2008,

203

Mohammad Mohammadi Aghdam, Masoud Mohammadi, Vahid Erfanian, "Bending analysis of thin annular sector plates using extended Kantorovich method", , Vol. , Num. 12, Page 0-0, December 2007,

204

Morteza Abouhamze, Mohammad Mohammadi Aghdam, Farbod Alijani, "Bending Analysis of Symmetrically Laminated Cylindrical Panels Using The Extended Kantorovich Method", , Vol. , Num. 14, Page 0-0, January 2007,

205

Saied Mohammad Reza Alavi Tabatabai, Mohammad Mohammadi Aghdam, Seyed Ali Eftekhari, "Three -Dimensional Elasticity Analysis of Thick Rectangular Laminated Composite Plates Using Meshless Local Petrov- Galerkin (MLPG ) Method", , Vol. , Num. 0, Page 0-0, September 2006,

206

Mohammad Mohammadi Aghdam, Mohammadreza Najafabadi Farahani, Mahdi Dashti Khoydaki, Seyed Mohammad Rezaei Niya, "Application of Generalized Differential Quadrature Method to The Bending of Thick Laminated Plates With Various Boundary Conditions", , Vol. , Num. 0, Page 0-0, September 2006,

207

Mohammad Mohammadi Aghdam, Amir Dejestan, "Micromechanics Based Analysis of Randomly Distributed Fiber Reinforced Composites Using Simplified Unit Cell Model", , Vol. , Num. 71, Page 0-0, September 2005,

208

Mohammad Mohammadi Aghdam, Ahmad Kamalikhah, "Micromechanical analysis of layered systems of MMCs subjected to bending-effects of thermal residual stresses", , Vol. , Num. 66, Page 0-0, June 2004,

209

Mohammad Mohammadi Aghdam, Sayed Reza Falahatgar, "Micromechanical modeling of interface damage of metal matrix composites subjected to transverse loading", , Vol. , Num. 66, Page 0-0, June 2004,

210

Mohammad Mohammadi Aghdam, Sayed Reza Falahatgar, "Bending analysis of thick laminated plates using extended kantorovich method", , Vol. , Num. , Page 0-0, December 2003,

211

Mohammad Mohammadi Aghdam, Amanollah Khugeh, "More on the effects of thermal residual and hydrostatic stresses on yielding behavior of unidirectional composites", , Vol. , Num. 1, Page 0-0, December 2003,

212

Mohammad Mohammadi Aghdam, D.J. Smith, M.J. Paviar, "Asymmetric behaviour of fibrous metal matrix composites", , Vol. , Num. 9, Page 0-0, September 2001,

213

Mohammad Mohammadi Aghdam, M.J. Paviar, D.J. Smith, "Micro-mechanics of off-axis loading of metal matrix composites using finite element analysis", , Vol. , Num. , Page 0-0, September 2001,

214

Mohammad Mohammadi Aghdam, J.A. Smith, M.J. Paviar, "Micromechanical modelling of SiC/Ti MMC,s subjected to bending", , Vol. , Num. 16, Page 0-0, August 2000,

215

Mohammad Mohammadi Aghdam, D.J. Smith, M.J. Paviar, "Finite element micromechanical modelling of yield and collapse behaviour of metal matrix composites", Journal of the Mechanics and Physics of Solids, Vol. 48, Num. 3, Page 0-0, March 2000,

216

Mohammad Mohammadi Aghdam, Mahmoud Shakeri, Shahriar Fariborz, "Solution to the reissner plate with clamed edges", , Vol. , Num. 122, Page 0-0, July 1996,

217

Mahmoud Shakeri, Shahriar Fariborz, Mohammad Mohammadi Aghdam, "Application of extended kantorovich method to the bending of reissner ,s plate", , Vol. 0, Num. 18, Page 0-0, January 1991,

مقالات کنفرانس

داده های ثبت شده در پورتال

Reza Nopour Hollari, Afshin Taghvaeipour, Mohammad Mohammadi Aghdam, Francisco Gonz?Lez, "Novel co-simulation technique in the flexible analysis of a parallel robot ", The 10th RSI International Conference on Robotics and Mechatronics (ICRoM 2022) © IEEE, November 2022

Ali Khalvandi, Mohammad Mohammadi Aghdam, Saeed Saber Samandari, "Fabrication, characterization, and experimental analysis of a novel Gelatin-based nanocomposite scaffold with bone substitute applications ", The 29th Annual International Conference of the Iranian Association of Mechanical Engineers and the 8th Conference on Thermal Power Plants, May 2021

Hadi Kabir, Saeed Saber Samandari, Mohammad Mohammadi Aghdam, "Fabrication of magnetic scaffold based on HAp/alginate for bone substitute ", 8th International congress on nanoscience and nanotechnology, February 2021

Mohammed Hussein Aljaberi, Maher Ar Sadiq Al-Baghdadi, Muhannad Al-Waily, Mohammad Mohammadi Aghdam, Taha Goudarzi, "Numerical Investigation of Mechanical Behavior for Lattice Structure with Effect of Different Nanomaterial Types ", 1st International Conference on Sustainable Engineering and Technology (INTCSET 2020), December 2020

Ali Khalvandi, Mohammad Mohammadi Aghdam, Saeed Saber Samandari, "Effects of different porosity volume fractions on the mechanical properties and global orthotropic behavior of gelatin closed-cell bio-foams ", The 7th International Conference on Composites: Characterization, Fabrication and Application, December 2020

Ali Khalvandi, Mohammad Mohammadi Aghdam, Saeed Saber Samandari, "Micromechanical Modeling of Gelatin-Based Nano-Composite Bone Scaffolds ", 27th National and 5th International Iranian Conference of Biomedical Engineering, November 2020

Faezeh Eskandari, Mahdi Shafieian, Mohammad Mohammadi Aghdam, Kaveh Laksari, "Visco-hyperelastic Properties of White and Gray Matters under Tension: an Ex-vivo Study ", The 28th Annual International Conference of Iranian Society of Mechanical Engineers-ISME2020, May 2020

Faezeh Eskandari, Mahdi Shafieian, Mohammad Mohammadi Aghdam, Kaveh Laksari, "Mechanical Properties of Brain White Matter under Repetitive Loading Condition: Introducing a Mechanical Damage Function ", 26th National and 4th International Iranian conference on Biomedical Engineering, November 2019

Faezeh Eskandari, Mohammad Mohammadi Aghdam, Mahdi Shafieian, "The Effect of Compressive Cyclic Loading on the Mechanical and Histological Properties of Brain Tissue ", American Society of Biomechanics East Coast Meeting, April 2019

Mohsen Moeini, Mahmoudreza Dehnavi, Reza Barbazesfahani, Saeed Saber Samandari, Mohammad Mohammadi Aghdam, "Molecular dynamics investigation of interaction energy between polystyrene/polyethelen and SWCNT, functionalized SWCNT and DWCNT ", :The 6th International Conference on Composites (Characterization, Fabrication and Application (CCFA-6, December 2018

Mohsen Moeini, Saeed Sahmani, Saeed Saber Samandari, Mohammad Mohammadi Aghdam, "The role of functionalized nanoparticles on cross-linked polymer/graphene by molecular dunamics simulation ", First Conference on Mechanical Behavior Modeling of Materials, October 2018

Ali Sarafraz, Mohammad Mohammadi Aghdam, Saeid Sahmani, "Nonlinear oscillation analysis of nanobeams under soft excitation including surface free energy effects ", 26th Annual International Conference of Iranian Society of Mechanical Engineers, April 2018

Narges Mohammadi, Mohammad Mohammadi Aghdam, Hamed Asadi, "instability analysis of conical shells filled with quiescent fluid with generalized differential quadrature method ", “ 26th Annual International Conference of Iranian Society of Mechanical Engineers”, April 2018

Narges Mohammadi, Mohammad Mohammadi Aghdam, "dynamic instability analysis of FG cylindrical shell due to fluid solid interaction ", 4th International Conference on Structural Engineering (IRAST2018), February 2018

Seyed Abdollah Sheikholeslami, Mohammad Mohammadi Aghdam, "A novel rational padé approximation of the inverse Langevin function ", 25th Annual International Conference on Mechanical Engineering, May 2017

Mehrdad Koloushani, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, Reza Hedayati, "Survey parameters affecting the mechanical behavior of metallic open cell foam under quasi static and dynamic pressure loading ", The first annual national conference in mechanical engineering and industrial solutions, August 2015

Saeid Sahmani, Mohammad Mohammadi Aghdam, Mohsen Bahrami, "Molecular mechanics modeling of hydrogen adsorbtion on boron nitride nanotubes ", 3rd International Conference on Nanotechnology, August 2015

Reza Hedayati, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, "Effect of porosity on the static and impact response of titanium in implants used inside femur bone ", (ISME 2015), May 2015

Seyedreza Morsali, Seyed Mohammad Amin Hosseini, Mohammad Mohammadi Aghdam, "Finite Element Simulation of Damage Initiation and Propagation in SiC/Ti Composites Subjected to Combined Thermo-mechanical Loading ", (4th International Conference on Composites: Characterization, Fabrication, and Application (CCFA-4, December 2014

Alireza Daman Pak Moghaddam, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Dynamic Analysis of Delaminated sandwich Beam by using of Five Layeres Element ", The 22nd Annual International Conference on Mechanical Engineering, April 2014

Hossein Ravanbakhsh Habibabadi, Mojtaba Sadighi, Mahdi Saadati, Mohammad Mohammadi Aghdam, "Failure Mode Map for Foam Core Sandwich Panel with Composite Faces under Static Local Loading ", The 22nd Annual International Conference on Mechanical Engineering - ISME2014, April 2014

Hossein Ravanbakhsh Habibabadi, Mohammad Mohammadi Aghdam, Hamed Niknamjahromi, Mojtaba Sadighi, "Numerical Analysis of Indentation in Sandwich Beams Based on Higher Order Theory; Differential Quadrature Method ", The 22nd Annual International Conference on Mechanical Engineering - ISME2014, April 2014

Milad Shahbaz, Mohammad Mohammadi Aghdam, "A Micromechanical study on the effects of residual stresses on the interphase damage of particular metal matrix composites ", The 3rd Int. conf. on Composites: Characterization, Fabrication and Application (CCFA-3), December 2012

Isa Ahmadi, Mohammad Mohammadi Aghdam, "Analysis of failure initiation in composite materials using direct micromechanical approach ", 2nd International conference on Engineering - MAT 2012, November 2012

Seyedreza Morsali, Mohammad Mohammadi Aghdam,, "The Effect of Cooling Rate on Thermal Residual Stress in SiC/Ti-6Al-4V Metal Matrix Composite ", 20th Annual International Iranian Mechanical Engineering Conference, May 2012

Elyas Abdollahi, Mohammad Mohammadi Aghdam, "Bending Analysis Of Thin Sector Plates With Piezolaminated Layers Using Extended Kantrovich Method ", 20th Annual International Iranian Mechanical Engineering Conference, May 2012

Mohammad Mohammadi Aghdam, Hamed Khodabandeh, "Di¤erential cubature method for static solutions of Reissner plates on elastic foundations with various boundary conditions ", International conference on Applied Mathematics and Approximation Theory, May 2012

Seyedreza Morsali, Mohammad Mohammadi Aghdam, "The Effects of Fiber Coating on The Damage Initiation and Propagation of Unidirectional Metal Matrix Composite ", 20th Annual International Iranian Mechanical Engineering Conference, May 2012

Isa Ahmadi, Mohammad Mohammadi Aghdam, "A local elsatic-plastic meshless method for micromechanics of composite materials ", 21st International Workshop on Computational Mechanics of Materials (IWCMM 21, August 2011

Ehsan Ameri, Mahmoud Shakeri, Mohammad Mohammadi Aghdam, "Implementation of the Globalized Nelder-?Mead method on fundamental frequency maximization of cylindrical panels ", 16th Int. Conf. on Composite Structures, June 2011

Ali Safari-Kahnaki, Mohammad Mohammadi Aghdam, Mohammad Reza Eslami, "Thermal stress wave propagation study of functionally graded thick hollow cylinder ", 11th International Conference Computational and Mathematical Methods in Science and Engineering, June 2011

Ali Fallah, Mohammad Mohammadi Aghdam, M.H. Kargarnovin, "FREE VIBRATION ANALYSIS OF FUNCTIONALLY GRADED PLATES ON ELASTIC FOUNDATION USING EXTENDED KANTOROVICH METHOD ", 16th International Conference on Composite Structures, June 2011

Ali Fallah, Mohammad Mohammadi Aghdam, "Bending analysis of laminated skew plates using extended Kantorovich method ", The 2nd International Conference on Composites: Characterization, Fabrication and Application (CCFA-2), December 2010

Ali Fallah, Mohammad Mohammadi Aghdam, "Stress analysis of functionally graded cylinders subjected to thermo-mechanical loads based on Bernstein polynomials ", ASME 2010 International Mechanical Engineering Congress & Exposition, November 2010

Isa Ahmadi, Mohammad Mohammadi Aghdam, Nasrin Sheikhi, "A New truly Meshless Method for Heat conduction in solid structures ", 2010 ASME International Mechanical Engineering Congress & Exposition, November 2010

Isa Ahmadi, Mohammad Mohammadi Aghdam, "Micromechanics of Combined Loading of Fibrous Composites using a Truly Meshless Method ", ASME 2010 International Mechanical Engineering Congress & Exposition, November 2010

Isa Ahmadi, Mohammad Mohammadi Aghdam, "A new integral based elasto-plastic meshless method ", The 6th ICCES International Conference on Meshless and Other Novel Computational Methods, August 2010

Nastaran Shahmansouri, Mohammad Mohammadi Aghdam, Kasra Bigdeli, "Static Analysis of Moderately Thick Functionally Graded Plates with Various Boundary Conditions ", 10th Biennial Conference on Engineering Systems Design and Analysis - ESDA 2010, July 2010

Isa Ahmadi, Mohammad Mohammadi Aghdam, "Unity Test Function Meshless Method for Heat Transfer in Heterogeneous Materials ", IV European conference on Computational Mechanics, May 2010

Ali Fallah, Mohammad Mohammadi Aghdam, "A New Technique For Stress Analysis Of Functionally Graded Pressure Vessels Based On Bernstein Polynomials ", 18th Annual International Conference on Mechanical Engineering -ISME2010, May 2010

Isa Ahmadi, Mohammad Mohammadi Aghdam, "A TRULY MESHLESS MODEL FOR ANALYSIS OF MICRO-STRESSES IN FIBROUS COMPOSITE MATERIALS ", 18th Annual International Conference on Mechanical Engineering (ISME2010), May 2010

Isa Ahmadi, Mohammad Mohammadi Aghdam, "A TRULY MESHLESS MODEL FOR ANALISYS OF MICRO-STRESSES IN FIBROUS COMPOSITE MATERIALS ", The 2010 International Conference on Mechanical and Aerospace Engineering (CMAE 2010), April 2010

[en-name N/A], Mohammad Mohammadi Aghdam, "Thermal residual strsses in metal matrix composites using a truly meshless method ", , September 2009

Isa Ahmadi, Mohammad Mohammadi Aghdam, "A truly generalized plane strain meshless model for combined normal and shear loading of fiber reinforced materials ", ICCES Special Symposium on Meshless Methods - ICCES MM09, August 2009

Nematallah Mardani Mehrabad, Majid Safar Johari, Mohammad Mohammadi Aghdam, "Finite Element Modeling of Yarn Balloom in the Ring Spinning ", 3rd Int. Conf. on Exp. / Process/System modeling/Simulation and Optimization.., July 2009

Atieh Andakhshideh, , Mohammad Mohammadi Aghdam, "Non-linear Bending Analysis of Laminated Composite Plates Using Generalized Differential Quadrature Method ", 17th International Conference on Composite Materials -ICCM 17, July 2009

Mohammad Javad Mahmoodi, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Micromechanics of randomly distributed fiber reinforced polymer matrix composites with transversely isotropic constituents ", , June 2009

Mohammad Mohammadi Aghdam, "A semi analytical solution for beding of moderately thick moubly curved fuctionally graded panels ", , June 2009

Sattar Maleki, Mohammad Mohammadi Aghdam, "Bending analysis of moderately thick laminated conical panels with various boundary conditions ", , June 2009

Mahmoud Shakeri, Mohammad Javad Mahmoodi, Mohammad Mohammadi Aghdam, "Micromechanical analysis of initial yielding of fiber reinforced composites subjected to various loading conditions ", , June 2009

Mohammad Mohammadi Aghdam, "Differential quadrature linear and non linear analysis of plates under various boundary conditions using FSDT ", , May 2009

Mohammad Mohammadi Aghdam, "Bending analysis of moderately thick FGM plates with any bondary conditions using GDQ meghod ", , May 2009

[en-name N/A], Mohammad Mohammadi Aghdam, "Micromechanical thermal analysis of unidirectional composite using meshless local petrov galerking method ", , May 2009

Sattar Maleki, Mohammad Mohammadi Aghdam, "Bending analysis of functionally graded sector plates with various boundary conditions using generalized differential quadrature method ", , May 2009

Atieh Andakhshideh, Mohammad Mohammadi Aghdam,, "Linear and Non-linear analysis of functionally graded plates using generalized differential quadrature method ", Composites 2009- 2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites, April 2009

Mahmoud Shakeri, Mohammad Mohammadi Aghdam, Mohammad Javad Mahmoodi, "Overal properties of randomly distributed particle reinforced composites using simplified unit cell model ", , January 2009

Mohammad Mohammadi Aghdam, Sattar Maleki, Atieh Andakhshideh, "Stress analysis of thin/ Moderately thick conical panels with various boundary condeition ", , January 2009

Seyed Mahmoud Mousavi, Mohammad Mohammadi Aghdam, "Bending analysis of laminated cylindrical panels with warious boundary condition using differential cubature method ", , January 2009

Sayed Reza Falahatgar, Manouchehr Salehi, Mohammad Mohammadi Aghdam, "Micro to macro analysis of nonlinear viscoelastic composite plate using DR method ", , January 2009

Mohammad Mohammadi Aghdam, Saeed Fazeli, "Micromechanics of unidirectional composites using generalized differential quadrature element method ", , January 2009

Atieh Andakhshideh, Mohammad Mohammadi Aghdam, Sattar Maleki, "Non linear bending analysis of moderately thick sector plates with various boundary conditions ", , January 2009

Sajjad Shaghaghi, Mojtaba Sadighi, Mohammad Mohammadi Aghdam, "An Experimental and Numerical study of Buckling of Filament-Wound laminated Conical Shells under Axial Compression Loading ", the 1st International Conference on Composites: Characterization, Fabrication and Application CCFA-1, December 2008

Mohammad Mohammadi Aghdam, Iman Ahmadi, "Micromechanical modeling of unidirectional composites using meshless local petrov galerkin method ", , October 2008

Mohammad Mohammadi Aghdam, "Stress analysis of moderately thick functionally graded plates with mixed boundary conditions ", , October 2008

Mohammad Mohammadi Aghdam, Maysam Gorji Bandpay, Sayed Reza Falahatgar, "Interface damage of SiC Ti metal matrix composites subjected to combined thermal and axial shear loading ", , October 2008

Ali Bateni, Mohammad Mohammadi Aghdam, Nader Parvin, "Prediction of Density in Porous Materials by X-ray Techniques ", , October 2008

Farbod Alijani, Mohammad Mohammadi Aghdam, Firooz Bakhtiari Nejad, "Free vibration analysis of fcunctionally graded thin plates using the extended kantorovich method ", , January 2008

Mohammad Mohammadi Aghdam, Mohammad Mohammadi, "Bending analysis of thick orthotropic sector plates with various loading and boundary conditions ", , November 2007

Farbod Alijani, Mohammad Mohammadi Aghdam, "Stress analysis of thick cylindrical panels with various boundary conditions ", , November 2007

Mohammad Javad Mahmoodi, Mohammad Mohammadi Aghdam, Mahmoud Shakeri, Amir Dejestan, "Micromechanical based analysis of porous materials using simplified unit cell model ", , May 2007

[en-name N/A], Mohammad Mohammadi Aghdam, "Bending analysis of laminated thick cylindrical panel with various boundary conditions using generalized differential quadrature method ", , May 2007

Amir Refahi Oskouei, Vahid Ansari, Mohammad Mohammadi Aghdam, "Analyzing of AE signals by wavelet to investigate damage mechanism in composite materials ", , April 2007

Mohammad Mohammadi Aghdam, Sayed Reza Falahatgar, "Micromechanics based analysis of interface damage of SiC/Ti metal mitrix composites subjected to combined loading condition ", , February 2007

Mohammad Mohammadi Aghdam, Farbod Alijani, "Stress analysis of thick antisymetric cross ply panels using extended kantorovich method ", , February 2007

Mohammad Mohammadi Aghdam, Masoud Mohammadi, "Extended kantorovich method for static analysis of thick orthotropic sector plates ", , February 2007

Mohammad Mohammadi Aghdam, Saeed Fazeli, "Bending analysis of moderately thick plates with mixed boundary conditions using generalized defferential quadrature method ", , February 2007

Mohammad Mohammadi Aghdam, Ale Eftechari, "Three- dimensional elasticity analysis of thick rectangular laminated composite plates using meshless local perov- galerkin method ", , September 2006

Manouchehr Salehi, Mohammad Mohammadi Aghdam, Sayed Reza Falahatgar, "The Simplified Unit Cell Method for Micromechanical Studies of Viscoelastic Properties of Unidirectional Fibre-Reinforced Composites ", , September 2006

Mohammad Mohammadi Aghdam, Mohammadreza Najafabadi Farahani, Mahdi Dashti Khoydaki, "Application of Generalized Differential Quadrature Method to the Bending of Thick Laminated Plates with Various Boundary Conditions ", , September 2006

Mohammad Mohammadi Aghdam, Mahmoud Shakeri, Akbar Alibeiklou, Ehsan Ameri, "Stacking sequence optimization for laminated cylindrical panels using the globalized nelder- mead method ", , September 2006

Mohammad Mohammadi Aghdam, [en-name N/A], "Bending analysis of curve- sided quadrilateral thin plates using the extended kantorovich method ", , September 2006

Mahmoud Shakeri, Ehsan Ameri, Mohammad Mohammadi Aghdam, "Stacking sequence optimization of laminated cylindrical panels using Globalized Nelder-Mead method ", CST 2006, April 2006

Mohammad Mohammadi Aghdam, "an extension to the simplified unit cell model for analysis of fiber reinproced composites ", , March 2005

Mohammad Mohammadi Aghdam, Hamid Naderan Tahan, "BENDING ANALYSIS OF SHEAR DEFORMABLE SECTOR PLATES USING THE EXTENDED KANTOROVICH METHOD ", INTERNATIONAL CONFERENCE ON MODELING, SIMULATION AND APPLIED OPTIMIZATION, February 2005

Mohammad Mohammadi Aghdam, "Micromechanics based analysis of randomly distributed fiber reinforced composites using simplified unit cell model ", , January 2005

Mohammad Mohammadi Aghdam, "Bending analysis of shear deformable sector plates using the Extended kantorovich method ", , January 2005

Mohammad Mohammadi Aghdam, Sayed Reza Falahatgar, "Effect of Manufacturing process thermal residual stress and interface in mechanical behavior of Metal Matrix Composites ", , December 2004

Mohammad Mohammadi Aghdam, "Application of the extended kantorovich method to bending analysis of sector plates ", , November 2004

Mohammad Mohammadi Aghdam, "Bending analysis of thick rectangular plates with various boundary conditions using extended kantorovich method ", , November 2004

Mohammad Mohammadi Aghdam, Sayed Reza Falahatgar, "Micromechanical Modeling of Interface Damage of Metal Matrix Composites Subjected to combined axial and transverse Loading ", , April 2004

Mohammad Mohammadi Aghdam, Sayed Reza Falahatgar, "Micromechanical modeling:of interface damage in transverse loading ", , December 2003

Mohammad Mohammadi Aghdam, Ahmad Kamalikhah, "Micromechanical analysis of:layered systems subjected to bending-effects of thermal residnd stresses ", , December 2003

Jamali Jamal-Aldin, Mohammad Mohammadi Aghdam, "Micromechauics of off-axis loading of composite Materials using sioplified unit cell model ", , May 2003

Mohammad Mohammadi Aghdam, Amanollah Khugeh, "More on the effects of thermas residual stress on yielding behavior of composite materials ", , January 2003

Mohammad Mohammadi Aghdam, Sayed Reza Falahatgar, "Bending analysis of thick laminated plates using Extended kantorovich Method ", , January 2003

Mohammad Mohammadi Aghdam, "STRES INTCRACTIONS IN UNIDIRCCTIONAL FIBER REINFORCCD COMPOSITES SUBJECTED TO OFF AXIS ", , June 2001

Mohammad Mohammadi Aghdam, "A Simplified Unit Cell Model for Unidirectional Fibre Reinforced Composites ", , May 2001

Mohammad Mohammadi Aghdam, "Micromechanical Modeling of Metal Matrix Composites Subjected To Combined Therimal And Shear Loading ", , March 1998

Mohammad Mohammadi Aghdam, Mahmoud Shakeri, "Bending of Orthotroic plates with shear deformation ", , March 1992

دروس ارائه شده

عنوان درس

توصیف درس

سرفصل ها

دوره درسی

Advanced Numerical Methods

To learn how to solve different algebraic and differential equations

Spring 2023

Statics

Static analysis of systems under different loading conditions and obtaining the failure possible locations in bodies

Spring 2023

Strength of Materials (II)

Deflection of beams and stress- strain analysis, failure of materials and buckling of beams and columns

Spring 2023

Strength of Materials (II)

Deflection of beams and stress- strain analysis, failure of materials and buckling of beams and columns

Fall 2022

Advanced Numerical Methods

To learn how to solve different algebraic and differential equations

Fall 2022

Strength of Materials (I)

Strength of materials investigates mechanical behavior of engineering materials and their strength in different loading conditions.

Fall 2022