مسعود برومند - دانشگاه صنعتی امیرکبیر

[{FirstNameE:SAHAR,LastNameE:FATHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Improving near-stall performance of axial flow compressors using variable rotor tandem stage Unsteady analysis", Physics of Fluids, vol. 37, no. 37184, pp.1-19, 2025.

[{FirstNameE:SAHAR,LastNameE:FATHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:HAMZEH,LastNameE:ESHRAGHI,Rank:3}], "Improving near-stall performance of axial flow compressors using variable rotor tandem stage. A steady analysis", Physics of Fluids, vol. 36, no. 9, pp.97101-97137, 2024.

[{FirstNameE:MOJTABA,LastNameE:HEIDARIAN SHAHRI,Rank:1},{FirstNameE:ALI,LastNameE:MADADI,Rank:2},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:3}], "Three-Dimensional Optimization of Blade Lean and Sweep for an Axial Compressor to Improve the Engine Performance", Journal of Applied Fluid Mechanics, vol. 16, no. 11, pp.2206-2218, 2023.

[{FirstNameE:REZVAN,LastNameE:RAKHSHAN,Rank:1},{FirstNameE:ALI,LastNameE:MADADI,Rank:2},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:3}], "Simulation and scale-up of a centrifugal compressor for a turbocharger of a lean combustion engine employing 1-D and 3-D design and geometrical modification of the impeller", , vol. 66, no. 66, pp.21-33, 2022.

[{FirstNameE:,LastNameE:seyed reza razavi,Rank:1},{FirstNameE:,LastNameE:shervin sammak,Rank:2},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:3}], "multidisciplinary design and optimizations of swept and leaned transonic rotor", Journal of Engineering For Gas Turbines and Power-Transactions of The Asme, vol. 139, no. 122601, pp.1-11, 2017.

[{FirstNameE:ALI REZA,LastNameE:NASERI,Rank:1},{FirstNameE:SHERVIN,LastNameE:SAMMAK,Rank:2},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:3},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:4}], "experimental investigation of inlet distortion effect on performance of a micro gas turbine", Journal of Engineering For Gas Turbines and Power-Transactions of The Asme, vol. 0, no. 0, pp.17-27, 2017.

[{FirstNameE:MOHADESEH SADAT,LastNameE:MIRHOSEINI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "multi-objective optimization of hot steam injection variables to control wetness parameters of steam flow within nozzles", Energy, vol. 141, no. 0, pp.1027-1037, 2017.

[{FirstNameE:MOHADESEH SADAT,LastNameE:MIRHOSEINI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "control of wetness fraction and liquid droplet size in wet steam two phase flows with hot steam injection", Meccanica, vol. 1, no. 1, pp.1-10, 2017.

[{FirstNameE:ALI,LastNameE:FAROKHIPOUR,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:MOHAMMAD JAFAR,LastNameE:KERMANI,Rank:3}], "Analysis of Surface Roughness Effect on the Performance of Gas Turbine Stage", , vol. 6, no. 2, pp.197-212, 2016.

[{FirstNameE:ALI REZA,LastNameE:NASERI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:SHERVIN,LastNameE:SAMMAK,Rank:3}], "Numerical Investigation of Effect of Inlet Swirl and Total-Pressure Distortion on Performance and Stability of an Axial Transonic Compressor", Journal of Thermal Science, vol. 25, no. 6, pp.501-510, 2016.

[{FirstNameE:HAMZEH,LastNameE:ESHRAGHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:3},{FirstNameE:MOHAMMAD,LastNameE:TOUDEFALLAH,Rank:4},{FirstNameE:ALI,LastNameE:MOHAMMADI,Rank:5}], "the effect of variable stator on performance of a highly loaded tandem axial flow compressor stage", Journal of Thermal Science, vol. 25, no. 3, pp.223-230, 2016.

[{FirstNameE:HAMZEH,LastNameE:ESHRAGHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:3},{FirstNameE:MOHAMMAD,LastNameE:TOUDEFALLAH,Rank:4},{FirstNameE:,LastNameE:Ali Mohammadi,Rank:5}], "The effect of variable stator on performance of a highly loaded tandem axial flow compressor stage", Journal of Thermal Science, vol. 25, no. 3, pp.110-119, 2016.

[{FirstNameE:HAMZEH,LastNameE:ESHRAGHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:3}], "A developed methodology in design of highly loaded tandem axial flow compressor stage", Journal of Applied Fluid Mechanics, vol. 9, no. 2, pp.110-123, 2016.

[{FirstNameE:SEYED REZA,LastNameE:RAZAVI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Numerical and Performance Analysis of One Row Transonic Rotor with Sweep and Lean Angle", Journal of Thermal Science, vol. 23, no. 5, pp.438-445, 2014.

[{FirstNameE:NAVID,LastNameE:SHARIFI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Thermodynamic evaluation of high compressible steam flow in vapor compression systems used in Desalination processes", Desalination and Water Treatment, vol. 2014, no. 1, pp.1-11, 2014.

[{FirstNameE:BIJAN,LastNameE:YADOLLAHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Numerical Investigation of Natural Gas Direct Injection Properties and Mixture Formation in a Apark Ignition Engine", Thermal Science, vol. 18, no. 1, pp.39-52, 2014.

[{FirstNameE:BIJAN,LastNameE:YADOLLAHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Multidimensional modeling of CNG direct injection and mixture preparation in a SI engine Cylinder", Scientia Iranica, vol. 20, no. 6, pp.1729-1741, 2013.

[{FirstNameE:BIJAN,LastNameE:YADOLLAHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Numerical Investigation of Combustion and Mixture Formation in a Compressed Natural Gas DISI Engine With Centrally Mounted Single-Hole Injector", Journal of Fluids Engineering-Transactions of The Asme, vol. 135, no. 91101, pp.1-9, 2013.

[{FirstNameE:BIJAN,LastNameE:YADOLLAHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Numerical Study of the effect of pisyon head and spark plug location on the performance of direct gas injection engines", , vol. 6, no. 1, pp.33-49, 2013.

[{FirstNameE:,LastNameE:Hamidreza Tabatabaei,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:,LastNameE:Mohammad Tayebi-Rahni,Rank:3}], "Experimental and Numerical Study of The Effect of Pulsating Flow on the Turbocharger Turbine Performance Parameter", Automotive Engineering International, vol. 1, no. 938, pp.1-10, 2013.

[{FirstNameE:NAVID,LastNameE:SHARIFI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:,LastNameE:Majid Sharifi,Rank:3}], "Numerical assessment of steam nucleation on thermodynamic performance of steam Ejectors", Applied Thermal Engineering, vol. 52, no. 52, pp.449-459, 2013.

[{FirstNameE:NAVID,LastNameE:SHARIFI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "An investigation of thermo-compressor design by analysis and experiment: Part 1. Validation of numerical method", Energy Conversion and Management, vol. 69, no. 69, pp.217-227, 2013.

[{FirstNameE:NAVID,LastNameE:SHARIFI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "An investigation of thermo-compressor design by analysis and experiment: Part 2. Development of design method by using comprehensive characteristic curves", Energy Conversion and Management, vol. 69, no. 69, pp.228-237, 2013.

[{FirstNameE:BIJAN,LastNameE:YADOLLAHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "The Effect of Combustion Chamber Geometry on Injection and Mixture Preparation in a CNG Direct Injection SI Engine", Fuel, vol. 107, no. 107, pp.52-62, 2013.

[{FirstNameE:NAVID,LastNameE:SHARIFI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:,LastNameE:Ramin Kouhikamali,Rank:3}], "Wet Steam Flow Energy Analysis", Energy, vol. 47, no. 10, pp.609-619, 2012.

[{FirstNameE:SHERVIN,LastNameE:SAMMAK,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Three dimensional numerical analysis of flow within an isolated rotor with stepped blades", Journal of Thermal Science, vol. 21, no. 5, pp.420-427, 2012.

[{FirstNameE:,LastNameE:Hamidreza Tabatabaei,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:,LastNameE:Mohammad Tayebi Rahni,Rank:3}], "An Investigation on Turbocharger Turbine Performance Parameters under Inlet Pulsating Flow", Journal of Fluids Engineering-Transactions of The Asme, vol. 134, no. 81102, pp.1-8, 2012.

[{FirstNameE:REZA,LastNameE:AGHAEI TOGH,Rank:1},{FirstNameE:JABAR,LastNameE:GHAFARI,Rank:2},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:3},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:4}], "numerical study of the effect of blade angles on the performance of centrifugal impellers", Aerospace Mechanics Journal, vol. 8, no. 2, pp.92-100, 2012.

[{FirstNameE:,LastNameE:H.R Tabatabaei,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:,LastNameE:M. Tayebi Rahni,Rank:3}], "Experimental and Numerical Investigation of 1-D and 3-D flow within a turbocharge of a gasoline MPFI Engine", , vol. 11, no. 4, pp.75-88, 2012.

[{FirstNameE:BIJAN,LastNameE:YADOLLAHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "The Effect of Piston Head Geometry on Natural Gas Direct Injection and Mixture Formation in a SI Engine with Centrally Mounted Single-Hole Injector", Automotive Engineering International, vol. 1, no. 2448, pp.1-12, 2011.

[{FirstNameE:REZA,LastNameE:AGHAEI TOGH,Rank:1},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:2},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:3}], "Numerical and experimental evaluation of supersonic turbine flow and effect of geometrical change of blade edges on turbine performance", , vol. 22, no. 1, pp.17-42, 2010.

[{FirstNameE:HOSSEIN,LastNameE:KHALEGHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:3}], "A method for calculating inlet distortion effects on stability of split-flow fans", The Aeronautical Journal, vol. 113, no. 1147, , 2009.

[{FirstNameE:HOSSEIN,LastNameE:KHALEGHI,Rank:1},{FirstNameE:,LastNameE:J.A Teixeira,Rank:2},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:3},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:4}], "Parametric Study of Injection Angle Effects on Stability of Transonic Axial Compressors", Journal of Propulsion and Power, vol. , no. 5, , 2008.

[{FirstNameE:HOSSEIN,LastNameE:KHALEGHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:,LastNameE:J.A Teixeira,Rank:3},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:4}], "A Numerical Study of The Effects of Injection Velocity on Stability Improvement in High-Speed Compressors", Proceedings of The Institution of Mechanical Engineers Part A-Journal of Power and Energy, vol. , no. 222, , 2008.

[{FirstNameE:HOSSEIN,LastNameE:KHALEGHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:3},{FirstNameE:,LastNameE:J.A Teixeira,Rank:4}], "Stall In a Transonic Axial Fan", Proceedings of The Institution of Mechanical Engineers Part A-Journal of Power and Energy, vol. , no. 222, , 2008.

[{FirstNameE:HOSSEIN,LastNameE:KHALEGHI,Rank:1},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:2},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:3}], "Recirculation casing treatment by using a vaned passage for a Transonic Axial -Flow Compressor", , vol. , no. 221, , 2007.

[{FirstNameE:REZA,LastNameE:KHAKI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Numerical Study of Skin Friction Drag Reduction by Surface Heating", , vol. 0, no. 0, , 2005.

[{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:1},{FirstNameE:NASSER,LastNameE:SERAJ MEHDIZADEH,Rank:2}], "CFD Simulation of SI Engine Combustion Process Using Vectis Code", , vol. , no. 5, , 2004.

[{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "An improvement to the streamline curvature method in analysing the performance of a turbomachine", , vol. , no. 0, , 2003.

[{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Performance analysis of turbomachine by means of streamline curvature method using loss and deviations correlation", , vol. , no. 1, , 2002.

مقالات همایش‌ها

[{FirstNameE:MOHAMMADREZA,LastNameE:SAEID,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Conceptual Design of a Pumped Thermal Energy Storage System,", The 31th Annual International Conference of Iranian Society of Mechanical Engineers and 9th Conference on Thermal Power Plants, May 2023.

[{FirstNameE:VAHIDEH,LastNameE:ESHAGHIAN,Rank:1},{FirstNameE:MEHRAN,LastNameE:TADJFAR,Rank:2},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:3}], "CFD Simulation and Dynamic Stall Study of a Vertical Axis Wind Turbine,", The 23rd Annual International Conference on Mechanical Engineering-ISME2015, May 2015.

[{FirstNameE:SEYED REZA,LastNameE:RAZAVI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Optiml design and Aerodynamic Study of Leanedtransonic Axial Flow Fan Rotors,", Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition IMECE2014, Nov 2014.

[{FirstNameE:ARASH,LastNameE:SOLTANI DEHKHARQANI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:HAMZEH,LastNameE:ESHRAGHI,Rank:3}], "A Numerical Investigation of Loss Coefficient Variation in Various Incidence Angles in Tandem Blades Cascade,", Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition IMECE2014, Nov 2014.

[{FirstNameE:ALI,LastNameE:MOHAMMADI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "DESIGN AND INTERNAL FLOW ANALYSIS OF A DUCTED CONTRA-ROTATING AXIAL FLOW FAN,", ASME 2014 International Mechanical Engineering Congress and Exposition, Nov 2014.

[{FirstNameE:HAMZEH,LastNameE:ESHRAGHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:3}], "Thermodynamic Non-dimensional Model to Estimate the Emitted Greenhouse Gases of a turbofan engine at Flight Altitude,", ASME 2014 International Mechanical Engineering Congress & Exposition, Nov 2014.

[{FirstNameE:HAMZEH,LastNameE:ESHRAGHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:3}], "Design and analysis of a highly loaded tandem axial flow compressor stage,", ASME 2014 International Mechanical Engineering Congress & Exposition, Nov 2014.

[{FirstNameE:ALI,LastNameE:MOHAMMADI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:HAMZEH,LastNameE:ESHRAGHI,Rank:3}], "Design and Analysis of a Ducted Contra-Rotating Axial Flow Fan,", International Symposium on Convective Heat and Mass Transfer, CONV-14, Jun 2014.

[{FirstNameE:BIJAN,LastNameE:YADOLLAHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Combustion Characteristics of A CNG DISI Engine Under Different Air/Fuel Ratios,", 8th Mediterranean Combustion Symposium, MCS 8, Sep 2013.

[{FirstNameE:ARASH,LastNameE:SOLTANI DEHKHARQANI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:HAMZEH,LastNameE:ESHRAGHI,Rank:3}], "Numerical Investigation of performance parameters in tandem cascades,", 21st Iranian Society of Mechanical Engineering Conference, May 2013.

[{FirstNameE:REZA,LastNameE:AGHAEI TOGH,Rank:1},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:2},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:3}], "Modeling of Loss and flow behaviour at inlet nozzle of a supersonic turbine,", دوازدهمین کنفرانس انجمن هوافضای ایران، تهران - دانشگاه صنعتی امیر کبیر- 1- 3 اسفند 1391, Feb 2013.

[{FirstNameE:VAHIDEH,LastNameE:ESHAGHIAN,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Design of a vertical wind turbine for Iranian climate,", 12th Aerospace society conference, Feb 2013.

[{FirstNameE:MOHSEN,LastNameE:SARGOLZAIE,Rank:1},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:2},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:3}], "Analytical Optimization of quasi-three dimensional of a compressor stage using genetic algorithm,", 12th conference of Aerospace engineering society, Feb 2013.

[{FirstNameE:ARASH,LastNameE:SOLTANI DEHKHARQANI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:HAMZEH,LastNameE:ESHRAGHI,Rank:3}], "Numerical analysis of the effects of loss coefficient under various incidence angles of tandem cascades,", 12th Conference of Aerospace Engineering Society, Feb 2013.

[{FirstNameE:ALI,LastNameE:MOHAMMADI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Design of an Axial Flow Fan with two Contra-Rotating Rotors and Simulation of its Behavior in Design & Off-design Condition,", 12th conference of Iranian Aerospace Society, Feb 2013.

[{FirstNameE:ALI REZA,LastNameE:NASERI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:3}], "the effect of inlet flow distortion on performance of a micro jet engine, part I:development of an inlet simulator,", proceedings of the ASME 2012 international mechanical engineering congeress & exposition IMECE2012, Nov 2012.

[{FirstNameE:REZA,LastNameE:AGHAEI TOGH,Rank:1},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:2},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:3}], "design optimization of a partial admitted supersonic turbine using genetic algorithm and 3D numerical analysis,", proceedings of the ASME 2012 international mechanical engineering congeress & exposition IMECE2012, Nov 2012.

[{FirstNameE:NAVID,LastNameE:SHARIFI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:,LastNameE:Majid Sharifi,Rank:3}], "Numerical Optimization of Ejector Geometry Based on Non-Dimensional Parameters,", ASME 2012 International Mechanical Engineering Congress & Exposition, IMECE2012, Nov 2012.

[{FirstNameE:NAVID,LastNameE:SHARIFI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:,LastNameE:M.Sharifi,Rank:3}], "Numerical Investigation of the Effects of Steam Nucleation on the Steam Ejectors Performance,", , ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012, Houston, Texas, USA, Nov 2012.

[{FirstNameE:SHERVIN,LastNameE:SAMMAK,Rank:1},{FirstNameE:RAMBOD,LastNameE:MOJGANI,Rank:2},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:3}], "RANS Investigation of the Transitional Flow over Stepped NLF(1)-0416,", ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012, Houston, Texas, USA, Nov 2012.

[{FirstNameE:SHERVIN,LastNameE:SAMMAK,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Computational analysis of a compressor rotor with enhanced airfoil,", ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012, Houston, Texas, USA, Nov 2012.

[{FirstNameE:NAVID,LastNameE:SHARIFI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Numerical Optimization of Thermo-compressors Based on Non-dimensional Geometric Parameters,", ASME 2012 Gas Turbine India Conference, GTINDIA2012, GTINDIA2012-9701, December 1,2012, Mumbai, Maharashtra, India, Nov 2012.

[{FirstNameE:ALIREZA,LastNameE:ALI HOSSEINI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:3},{FirstNameE:ARYAN,LastNameE:HOROUFI,Rank:4}], "design and development of a micro jet engine indoor test cell,", proceedings of the ASME 2012 international mechanical engineering congeress & exposition IMECE2012, Nov 2012.

[{FirstNameE:ALI REZA,LastNameE:NASERI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:3},{FirstNameE:ALIREZA,LastNameE:ALI HOSSEINI,Rank:4}], "the effect of inlet flow distortion on performance of a micro jet engine, part II : engine test,", proceedings of the ASME 2012 international mechanical engineering congeress & exposition IMECE2012, Nov 2012.

[{FirstNameE:SHERVIN,LastNameE:SAMMAK,Rank:1},{FirstNameE:RAMBOD,LastNameE:MOJGANI,Rank:2},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:3}], "Transitional CFD investigation of stepped airfoil,", 7th International Symposium on Turbulence, Heat and Mass Transfer, Sep 2012.

[{FirstNameE:REZA,LastNameE:AGHAEI TOGH,Rank:1},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:2},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:3},{FirstNameE:,LastNameE:M.J. Momtazeri,Rank:4}], "One dimensional optimization of partial admission supersonic impulse turbine using genetic algorithm,", ISME2012, May 2012.

[{FirstNameE:REZA,LastNameE:AGHAEI TOGH,Rank:1},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:2},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:3}], "PARTIAL OPTIMIZATION OF SUPERSONIC TURBINES USING GENETIC ALGORITHM AND CFD,", THE FIRST NATIONAL GAS TURBINE CONFERENCE, May 2012.

[{FirstNameE:BIJAN,LastNameE:YADOLLAHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "A Numerical Investigation of Combustion Chamber Geometry Effects on Natural Gas Direct Injection Properties in a SI Engine with Centrally Mounted Multi-Hole Injector,,", ASME 2012 Internal Combustion Engine Division Spring Technical Conference, ICES2012-81153,Italy, May 2012.

[{FirstNameE:SHERVIN,LastNameE:SAMMAK,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Surge Improvement in an Isolated Rotor with Enhanced Airfoil,", 20th Annual International Conference on Mechanical Engineering-ISME2012, May 2012.

[{FirstNameE:SHERVIN,LastNameE:SAMMAK,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Three dimensional analysis of one stage rotor compressor with stepped blade,", 11th Conference of Iranian Aerospace Society, Feb 2012.

[{FirstNameE:AMIN,LastNameE:HAGHIGHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "An Investigation on the aerodynamic performance of aircraft intake under subsonic inlet flow,", ، AERO2011, Mar 2011.

[{FirstNameE:ALIREZA,LastNameE:ALI HOSSEINI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:3},{FirstNameE:ARYAN,LastNameE:HOROUFI,Rank:4}], "Conceptual design of indoor microjet engine test cell,", AERO2011, Mar 2011.

[{FirstNameE:NARGES,LastNameE:SADEGZADETABATABAEE,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:3}], "preliminary design of a microjet turbine component,", AERO2011, Mar 2011.

[{FirstNameE:MOHSEN,LastNameE:SARGOLZAIE,Rank:1},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:2},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:3}], "Analytical on dimensional optimization of an axial compressor using genetic algorithm,", Aero2011, Mar 2011.

[{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:1},{FirstNameE:ARASH,LastNameE:SOLTANI DEHKHARQANI,Rank:2},{FirstNameE:MARYAM,LastNameE:KHELGHATIBANA,Rank:3},{FirstNameE:MINA,LastNameE:VAHIDI,Rank:4}], "Preliminary design of axial flow compressors,", ،AERO2011-6519, Mar 2011.

[{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:1},{FirstNameE:JABAR,LastNameE:GHAFARI,Rank:2},{FirstNameE:REZA,LastNameE:AGHAEI TOGH,Rank:3},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:4}], "performance improvement of a radial impeller,", Aero2011, Mar 2011.

[{FirstNameE:SHIRZAD,LastNameE:HOSSEINVERDI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Prediction of Laminar-Turbulent Transitional Flow over single and two-element airfoils,", 40th Fluid Dynamics Conference and Exhibit, Jun 2010.

[{FirstNameE:ARYAN,LastNameE:HOROUFI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Design and Construction of Microjet Engine at Amirkabir University of Technology,", 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit,, Aug 2009.

[{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:1},{FirstNameE:SHIRZAD,LastNameE:HOSSEINVERDI,Rank:2}], "Numerical Investigation of Turbulent Flow around a Stepped Airfoil at High Reynolds Number,", FEDSM2009, ASME Fluids Engineering Division Summer Meeting,, Aug 2009.

[{FirstNameE:ARYAN,LastNameE:HOROUFI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "The effect of augmenter tube configuration on jet engine test cell performance,", Jul 2007.

[{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:1},{FirstNameE:BIJAN,LastNameE:YADOLLAHI,Rank:2}], "Aerodynamic modeling of flow within a GDI engine cylinder,", May 2007.

[{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:1},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:2},{FirstNameE:NAVID,LastNameE:SHARIFI,Rank:3}], "Numerical analysis of surge and stall in axial flow compressors,", ISME 2007, May 2007.

[{FirstNameE:HOSSEIN,LastNameE:KHALEGHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:3}], "An Improved Streamline Curvature Approach For Off-Design Analysis of Transonic Compressors,", Nov 2005.

[{FirstNameE:AZADEH,LastNameE:GHADIMI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:3}], "Thermodynamic Model of a Gas Turbine for Diagnostic Software,", Nov 2004.

[{FirstNameE:ELHAM,LastNameE:TOLOUEI,Rank:1},{FirstNameE:MAHMOUD,LastNameE:MANI,Rank:2},{FirstNameE:MOHAMMADREZA,LastNameE:SOLTANI,Rank:3},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:4}], "Flow Analysis Around a pitching airfoil,", Aug 2004.

[{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:1},{FirstNameE:AMIR HOSSEIN,LastNameE:BARADARAN GHANNAD,Rank:2}], "An Investigation of Spark Plug Location in Spark Ignition Engine Combustion Chamber,", May 2004.

[{FirstNameE:HOSSEIN,LastNameE:KHALEGHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2}], "Gas Turbine Dynamic Simulation,", May 2004.

[{FirstNameE:HOSSEIN,LastNameE:KHALEGHI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:3}], "Gas Turbine Dynamic Simulation,", Feb 2004.

[{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:1},{FirstNameE:NASSER,LastNameE:SERAJ MEHDIZADEH,Rank:2},{FirstNameE:AMIR HOSSEIN,LastNameE:BARADARAN GHANNAD,Rank:3}], "CFD Simulation of SI Engine Combustion Process Using VECTIS,", Oct 2003.

[{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:1},{FirstNameE:S.M.H.,LastNameE:KARIMIAN,Rank:2},{FirstNameE:AMIR,LastNameE:NEJAT,Rank:3}], "Solution of Supersonic Flow Over Blunt Geometries,", Dec 1999.

[{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:1},{FirstNameE:AMIR,LastNameE:NEJAT,Rank:2}], "Solution of Euler Equations over complex Geometries using cartesion grid,", Dec 1999.

[{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:1},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:2},{FirstNameE:REZA,LastNameE:KHAKI,Rank:3},{FirstNameE:AHMAD,LastNameE:POUREBRAHIMI,Rank:4}], "Solution of two and three dimensional viscous flow over Paykan body,", May 1998.

[{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:1},{FirstNameE:REZA,LastNameE:KHAKI,Rank:2},{FirstNameE:AHMAD,LastNameE:POUREBRAHIMI,Rank:3}], "Transonic Finite Element Solution of Euler Equations for External and Internal Flows,", Dec 1997.

[{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:ARASH,LastNameE:FARAMARZI,Rank:3}], "Performance Analysis of Turbomachines by means of Streamline curvature Method Using Loss and Deviation Correlations,", Dec 1997.

[{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:1},{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:2},{FirstNameE:ARASH,LastNameE:FARAMARZI,Rank:3}], "Quasi Three Dimensional Flow Analysis Within Turbo machinery Blade Passage Using Streamline Curvature Method,", Apr 1997.

[{FirstNameE:MASOUD,LastNameE:BOROOMAND,Rank:1},{FirstNameE:ABOLGHASEM,LastNameE:MESGARPOUR TOUSI,Rank:2},{FirstNameE:AMIR,LastNameE:REZAEI KHOLAFAEI,Rank:3}], "Numerical Solution of Flow within Turbo machines using Time Marching Method,", Oct 1996.

دروس ارائه شده

عنوان درس

توصیف درس

سرفصل ها

دوره درسی

Numerical Methods in Turbo Machines

4051

Turbomachines

4051

Aerodynamic Design of Turbomachines

آشنایی کامل دانشجویان با مراحل طراحی توربوماشین های جریان محوری خصوصا توربین جریان محوری از اهداف این درس می باشد.

4042

Principles of Propulsion

4042

Turbomachines

4041

Numerical Methods in Turbo Machines

4032

Principles of Propulsion

4032