حسین حسینی تودشکی - دانشگاه صنعتی امیرکبیر

خدمات ویژه: هیئت علمی دانشجویان دانش آموختگان کارکنان

مطالب پایگاه

اعضای هیات علمی

اینترنت

پست الکترونیک

اتوماسیون اداری و مکاتبات

پورتال آموزشی و پژوهشی

سامانه آموزش الکترونیک

مدیریت یادگیری - دروس حضوری

سامانه ارتقای اساتید(اوج)

سامانه جامع نظام پیشنهادها

سامانه یکپارچه کتابخانه‌ها

سامانه مدیریت یکپارچه آموزش کارکنان

دانشگاه صنعتی امیرکبیر

سامانه رزومه

حسین حسینی تودشکی

استاد
دانشکده مهندسی هوافضا
گروه آموزشی سازه‌های هوافضایی- مکانیک پرواز و کنترل

دریافت با فرمت PDF English

پست الکترونیک:

hosseini

aut.ac.ir

شماره تماس:

h-index (Scopus):

32.00

ارجاعات (Scopus):

3360

رساله‌های دکتری

عنوان پایان‌نامه

توسط

تاریخ دفاع

بررسی و مدلسازی اثر مکانیزم های استهلاک بر رفتار استهلاکی مودال چند لایه های کامپوزیتی با جدایش بین لایه ای

شبنم کیاست دولت ابادی و علی صالح زاده نوبری
استاد راهنمای دیگر:
استاد راهنمای دیگر: متعو فیلیپی

مهر 1404

تحلیل رفتار و ارائه ساختارهای بهینه شبکه ای فلزی ساخته شده به روش تولید افزودنی تحت بارگذاری خستگی پرچرخه

سید امید جابری
استاد راهنمای دیگر: جیران نفردستگردی

مهر 1403

تحلیل شروع و رشد خرابی در مواد الاستومر بر اساس تابع چگالی انرژی کرنشی هایپرویسکوالاستیک و تئوری ناحیه چسبنده

مینا جهانمردی

شهریور 1402

تعیین خواص مکانیکی ناحیه واسط در مواد چند فازی با تاکید بر کامپوزیت های فیبر بلند با ترکیب روشهای دینامیک ملکولی و پری داینامیک

مسعود صابر

اسفند 1401

تحلیل نظری و تجربی رفتار کششی و شکست کامپوزیت های تقویت شده با برید هیبریدی

غزل غمخوار و مجید صفرجوهری
استاد راهنمای دیگر:

فروردین 1401

تحلیل دو بعدی رفتار استاتیکی، آسیب و تغییر فرم پلاستیک در کامپوزیتهای ذره ای با استفاده از روش پری داینامیک

مرتضی احمدی و مجتبی صدیقی
استاد راهنمای دیگر:

فروردین 1400

تحلیل مکانیزم خرابی در پانلهای ساندویچی با پوسته چند لایه فلز / الیاف تحت اثر بار خستگی کم چرخه

فاطمه مظاهری طرئی

مهر 1397

تحلیل چند مقیاسی رفتار مکانیکی فوم آلومینویم سلول باز تحت بارگذاری تناوبی فشاری کم چرخه

بهرنگ حمیدی قلعه جیق
استاد راهنمای دیگر: محمدعلی فارسی

خرداد 1397

اثرات نرخ بارگذاری ،اصطکاک و اندازه بر نرخ رهایی انرژی کرنشی در مود II برشی بین لایه ای

محمدسعید گودرزی
استاد راهنمای دیگر: علی صالح زاده نوبری

آبان 1396

بررسی رفتار باربری و خرابی پیش رونده در پانلهای ساندویچی با رویه کامپوزیتی و هسته فوم تحت بار خمشی دو طرفه

علیرضا نظری و محمدزمان کبیر
استاد راهنمای دیگر:

دی 1395

بررسی عددی و تجربی ترکهای ماتریس بر نرخ رهایی انرژی کرنشی بین لایه ای در چند لایه های چند جهته

مسعود نیکبخت زرقری

مهر 1395

تحلیل تجربی و عددی خواص استاتیکی و خستگی الومینیوم نانو ساختار 6061

مرضیه یداله پور

بهمن 1394

تحلیل پایداری رفتار استاتیکی و دینامیکی سیستم های نانو الکترو مکانیکی تیر شکل با در نظر گرفتن اثر نیروهای نانو مقیاس و وابستگی به اندازه

علی کوچی

دی 1394

تحلیل مکانیزم های خرابی ترک ماتریسی و جدایش بین لایه ای در چند لایه های عمومی متقارن حاوی ناپیوستگی هندسی

قاسم صادقی

بهمن 1392

مدلسازی اثرات جدایی بین لایه ای ناشی از ترک های ماتریسی با استفاده از مکانیک خرابی چند مقیاسی

میثم جلالوند

دی 1391

کوپل تئوری های خرابی مقیاس میکرو مزو در تحلیل خرابی صفحات کامپوزیتی چند لایه در چارچوب مکانیک خرابی محیط های پیوسته

امین فرخ آبادی

بهمن 1389

تحلیل مکانیزمهای خرابی درصفحات کامپوزیتی چند لایه تحت بار کششی محوری بااستفاده از تئوری های لایر وایزومکانیک خرابی پلاستیسیته محیطهای پیوسته

بیژن محمدی سنگجوئی
استاد راهنمای دیگر: محمد همایون صدر

آبان 1387

توسعه روشهای بدون المان بااستفاده از نگاشت توابع

مهدی موسیوند ارزانفودی

دی 1385

ارتعاشات یک میدان کوپل سازه ای - آکوستیکی استوانه ای شکل

محمدرضا مفخمی

تیر 1385

بررسی اثر ابعاد در استحکام شکست چند لایه های تک جهته الیاف کربن با استفاده از مواد مرکب ترکیبی الیاف کربن و شیشه

فریبرز شیبانیان
استاد راهنمای دیگر: میثم جلالوند

پایان‌نامه‌های کارشناسی ارشد

عنوان پایان‌نامه

توسط

تاریخ دفاع

پیشبینی شروع و رشد ترک در مواد همگن تحت بارگذاری خستگی با استفاده هم زمان از روش های پری داینامیک و المان های محدود

عرفان کوهی

اسفند 1403

تحلیل تاثیر ضریب پوآسون منفی روی چقرمگی شکست و مقاومت در مقابل خستگی چند لایه های کامپوزیتی با استفاده از روش های تجربی و مکانیک خرابی پیوسته

متین تشیعی

شهریور 1403

بررسی حساسیت خصوصیات مکانیکی ناحیه واسط بین الیاف شیشه و زمینه پلیمری در کامپوزیتها با استفاده از تست قطعات تک فیبر و روش CZM

یاسین رضائی

شهریور 1403

عنوان فارسی: تاثیر هندسه های خاص و ترکیب ساختار ماده در پانل های فلزی تحت اثر بارهای استاتیکی بر ضریب پواسون کل و پتانسیل خرابی با استفاده از روشهای تجربی و عددی (پرینتر سه بعدی، فرمینگ و CDM)

احسان انصاری

شهریور 1402

تاثیر هندسه های خاص، جنس ولایه چینی های متفاوت در پانل های کامپوزیتی تحت بارهای استاتیکی برضریب پواسون کلی و توزیع خرابی بااستفاده از روشهای تجربی و عددی.

سینا اسماعیلی ینگجه

اردیبهشت 1402

اندازه گیری مدول الاستیک فاز میانی تشکیل شده بین رزین اپوکسی و الیاف شیشه با استفاده ازیک روش تجربی جدید

عزیزالله نوائی

مرداد 1400

بکارگیری یک روش غیر محلی پریداینامیک در پیش بینی آسیب خوردگی و رشد ترک

محمد صادقی

بهمن 1399

تحلیل تأثیر پارامترهای میکروساختار بر شروع و گسترش خرابی و رفتار مکانیکی در کامپوزیت های تقویت شده با نانولوله های کربن با استفاده از روش المان های محدود

میلاد لطف یاسوری

تیر 1399

تخمین عمر باقی مانده لوله های تحت فشار دارای انواع خوردگی و تمدید عمر آنها با استفاده از ترمیم های کامپوزیتی

حامد بخشیان لنجی

تیر 1398

تحلیل انعطاف پذیری و مکانیزم های خرابی در چند لایه های کامپوزیتی هیبرید گلاس/کربن با استفاده از المان های چسبنده مدل غیرمحلی و مکانیک خرابی پیوسته

غزل افشار

تیر 1398

پایش خرابی و سلامت اتصال ترمیم کامپوزیتی روی صفحات الومینیومی حاوی ترک تحت اثر بار خستگی

پوریا سبزی

بهمن 1397

تاثیر افزودن نانو ذرات پلیمری به ماتریس کامپوزیتهای هیبریدی بر شکل پذیری و چقرمگی شکست در اثر بار استاتیک

حسنا هوشیار

اسفند 1396

استخراج روابط تحلیلی برای محاسبه ضرایب شدت تنش در مودهای اول و ترکیبی شکست برای پانل های تقویت شده و حاوی ترمیم کامپوزیتی

سیدسبحان سیدزاده

اسفند 1396

بررسی اثرات برهم کنش خستگی و خزش در تعیین عمر قطعات آلیاژ فلزی با استفاده از روش مکانیک خرابی پیوسته

پدرام پرندآور

بهمن 1396

تحلیل پارامتری شکست سازه های کامپوزیتی حاوی ترک بین لایه ای با در نظرگیری رفتار غیر محلی خرابی با استفاده از روش مبتنی بر باندهای بین ذره ای

زهراسادات قادری

شهریور 1396

بهینه سازی ابعاد ولایه چینی ترمیم های کامپوزیتی در صفحات آلومینیومی با در نظر گیری خرابی پیشرونده ترمیم در شرایط مودهای مختلط شکست

فریبرز شیبانیان
استاد راهنمای دیگر: حمیدرضا اویسی

تیر 1396

(NO TITLE)عنوان فارسی: تحلیل خرابی پیش رونده بین لایه ای با استفاده از مدل های غیرمحلی مکانیک خرابی پیوسته و ناحیه چسبنده (CZM) در چند لایه های کامپوزیتی تحت بارگذاری کششی

سعید محمدی

تیر 1396

تحلیل تجربی و مدل المان های چسبنده در جدایش بین لایه ای در چند لایه های کامپوزیتی در شرایط پس کمانش

علی اصغر جهانگیر و حمیدرضا اویسی
استاد راهنمای دیگر:

تیر 1395

تشخیص موقعیت و اندازه خرابی بین لایه ای در پانل های کامپوزیتی با استفاده از روش امواج لمب

امین پیرایش

بهمن 1394

بهینه سازی محل سنسورهای پیزوالکتریک بر مبنای انتشار امواج لمب در تشخیص خرابی های مکانیکی

فاضل عبدالرضایی امجد

بهمن 1394

تحلیل خرابیهای بین و درون لایه ای پیش رونده در چند لایه های کامپوزیتی تقویت شده تحت اثر بارهای خستگی پرچرخه

محمد مهدی شریعتمدار
استاد راهنمای دیگر: منوچهر صالحی

مهر 1394

تحلیل رشد خرابی تحت اثر بارگذاری ضربه سرعت پایین تکرار شونده در چند لایه های فلز الیاف Glare

زهرا مصطفوی

شهریور 1394

تاثیر اتصال ناقص و کاهش مقاومت اتصال المان های PZT بر شناسایی خرابی و سلامت پنل های آلومینیومی

محمدرضا زرین ماه

شهریور 1394

بررسی تاثیر آماده سازی سطح فلز و روش ساخت چند لایه ای Glare بررفتار خستگی و مقاومت به جدایش لایه ای تحت بارهای استاتیکی و تناوبی

سیدحسن حسینی نژاد

شهریور 1394

تأثیر لایه چینی مایل (Angle-Ply) بر چقرمگی شکست در چند لایه های کامپوزیتی الیاف شیشه/اپوکسی

امین سمواتی
استاد راهنمای دیگر: منوچهر صالحی

شهریور 1394

تحلیل جدایش بین لایه ای پیشرونده در چند لایه های کامپوزیتی تحت اثر بارگذاری ضربه تکرار شونده

بابک روشنفر و منوچهر صالحی
استاد راهنمای دیگر:

بهمن 1393

تاثیر جدایش الیاف و ماتریس بر رفتار مکانیکی چندلایه های کامپوزیتی پلیمری با استفاده از نگرش میکرومکانیک

الهام محمدی جرجافکی

مهر 1393

مدل سازی مایکرو مکانیک خواص مکانیکی و رشد ترک خستگی کم چرخه ( LCF)در موارد نانو کریستال با ساختار دوفازی

مریم جمالیان

مهر 1393

تحلیل مایکرومکانیک تجربی و عددی رفتار خستگی پرچرخه فولاد دوفازی DP-600

بهنام انبارلوئی

شهریور 1393

تحلیلی خرابی در مسائل دو بعدی تحت اثر خزش با استفاده از المانهای چسبنده

ابراهیم فدایی

تیر 1393

تحلیل جدایش پیشرونده اتصال پره کامپوزیتی توربین بادی به هاب تحت اثر بارهای خستگی

مینا جهانمردی

تیر 1393

تحلیل خرابی پیوسته و رشد ترک در صفحات فلزی تحت خزش، حاوی تمرکز تنش در بار ثابت و درجه حرارت کارکرد یکنواخت

مصطفی جان نثاری

بهمن 1392

تحلیل جدایش پیش رونده بین لایه ای در چند لایه های فلز-کامپوزیت (FML) در اثر بارهای متناوب داخل و خارج صفحه ای با استفاده از المانهای چسبنده

جعفر عبادی رجلی
استاد راهنمای دیگر: علیرضا رهائی

آبان 1392

مدلسازی خرابی درون لایه ای در چندلایه های مرکب با استفاده از رویکرد چند مقیاسی

محمدحسین غیور

بهمن 1391

تأثیر درجه حرارت پخت بر رشد ترک ناشی از خستگی در صفحات آلومینیومی ترمیم شده توسط چندلایه ای های فلز/ الیاف (GLARE)

علی وجدانی و مجتبی صدیقی
استاد راهنمای دیگر:

اسفند 1390

تحلیل رشد ترک در پانل های نازک با استفاده از روش المان محدود توسعه یافته

پویا صنیعی

بهمن 1390

تحلیل رشد جدایش بین لایه ای مواد مرکب چندلایه تحت بارگذاری فشاری متناوب با استفاده از قانون چسبندگی

محمدسعید گودرزی

بهمن 1390

ترمیم پانلهای آلومینیمی حاوی تقویت کننده و دارای ترک تحت اثر بارهای متناوب کششی و برشی توسط چندلایه های کامپوزیتی

میرعلی غفاری قره باغ

آبان 1390

تحلیل پارامترهای موثر بر جدایش اتصال ترمیم یکطرفه کامپوزیتی در پانل های ترکدار آلومنیومی

علی جاسم زاده رنجبر

بهمن 1389

تحلیل خرابی چند لایه های کامپوزیتی ناشی از ترکهای ماتریسی و جدایش لایه های ناشی از آن با استفاده از روش اجزاء محدود بر پایه نگرش مایکرو مکانیک

حیدرعلی رشتیانی

بهمن 1389

تحلیل خستگی ناشی از آکوستیک بر روی سیلندرهای کامپوزیتی با و بدون خرابی

مسعود کریمی

بهمن 1388

پیش بینی خرابی در کامپوزیت ها با استفاده از روش پارامتریک بدون المان گالرکین

فاطمه مظاهری طرئی

دی 1388

: بررسی اثرات لبه های آزاد روی چگونگی ایجاد و انتشار ترک های بین لایه ای با استفاده از تئوری layerwise و مکانیک شکست الاستیک خطی تحت بار های کششی

سامان حسینی

اسفند 1387

تاثیر لایه چینی ترمیم ورشد جدایش درمقاومت چند لایه ها ی کامپوزیتی ترمیم شده با استفاده از روش scarf یک طرفه

رضا فتاحی

بهمن 1387

بررسی چگونگی ایجاد و انتشار خرابی بین لایهای در چندلایههای کامپوزیتی با استفاده از تئوری لایر- وایز و المانهای بینلایهای

سمیرا حسینی

دی 1387

تحلیل خرابیهای ناشی از جدایش بین لایه ای چندلایه های کامپوزیتی بااستفاده از روش INTERFACE ELEMENT

میثم جلالوند

خرداد 1387

تاثیر تنشهای پسماند حرارتی بر رشد ترک ناشی از خستگی در پانلهای آلومینیومی ترمیم شده توسط مواد کامپوزیتی مختلف

مجتبی شامبولی

خرداد 1387

پیش بینی شکست نهایی در چندلایه های متقارن باروش انرژی

سیداحمد گلچوبیان

مرداد 1386

بدست آوردن معیاری برای مدل کردن شروع و انتشار ترک در ماتریس و جدایی لایه هادر CROSS-PLY LAMINATE

حامد یازرلو

مرداد 1386

تاثیر ترتیب بارگذاری بارهای متغیر در رشد ترک ناشی از خستگی درقطعات

وحید سلیمانی

بهمن 1385

رشد سه بعدی ترک درصفحات ضخیم آلومینیومی حاوی ترک مایل وترمیم شده بوسیله وصله کامپوزیتی

مسعود صابر

بهمن 1384

بررسی رشد ترک در مد - I به کمک روش المان محدود بدون مش و آزمایش تحت بار خستگی

مرتضی دشتی و حمیدرضا داغیانی
استاد راهنمای دیگر:

بهمن 1384

مطالعه پارامتریک رفتار مکانیک قرنیه انسان پس از عمل لیزیک

پیام رستمی زاده و حمیدرضا داغیانی
استاد راهنمای دیگر:

بهمن 1384

مطالعات تجربی رشد ترک درصفحات آلومینیومی ترمیم شده بااستفاده ازوصله های کامپوزیتی

سعید بخشنده

مرداد 1384

مطالعه رشدترک بین ودرون لایه ای ترکیب پوسته وتقویت کننده ازجنس مواد مرکب تحت اثر بارهای خستگی

بهرنگ حمیدی قلعه جیق

خرداد 1384

مدلسازی و تحلیل سیستمهای کوپله air-struetureباستفاده از روش اجزامحدود

رضا یارمحمدی

آبان 1383

بررسی سه بعدی تلرانس خرابی پانلهای آلومینیومی تعمیر شده توسط مواد کامپوزیت

قاسم صادقی

خرداد 1383

پیش بینی رشد ترک تحت اثر پدیده خزش با استفاده از روش المانهای محدود

شیوا شعاری

تیر 1382

ترمیم صفحات حاوی ترک بوسیله صفحات کامپوزیتی

بیژن محمدی سنگجویی

بهمن 1381

پیش بینی شروع ترک در قطعات تحت اثر بارهای نوسانی

مهدی موسیوند ارزانفودی

آبان 1379

بررسی و طراحی دابل رهاو استخراج منحنی بدون بعد

امیرعلاالدین مطلبی

آبان 1379

بررسی اثر فرکانس بارگذاری برعمرخستگی قطعات

رضا حاجی قاسمعلیان

شهریور 1379

بررسی خرابی قطعات تعمییرشده سازه هواپیما

حسین شاهوردی

دی 1378

روشهای آمار جهت پیش بینی شکست درسازه های هوایی

محمدرضا مفخمی

دی 1378

مقالات مجلات

H. Hosseini Toudeshky, A. Navaei, Z. Mostafavi, "Structural response and progressive damage analyses of GLARE under repeated low velocity impacts", European Journal of Mechanics A-Solids, vol. 116, no. 105850, pp.1-16, 2025.

H. Hosseini Toudeshky, "Health monitoring of damage analysis of composite repair on cracked aluminum panels under fatigue loading", , vol. 12, no. 3, pp.10-16, 2025.

H. Hosseini Toudeshky, S. Esmaeili Yengeje, A. Navaei, "Effects of layups with negative and positive Poisson's ratios on the stress-strain behaviors of plain and holed hybrid composite laminates", Journal of Reinforced Plastics and Composites, vol. 1, no. 1, pp.1-16, 2025.

F. Sheibanian, H. Hosseini Toudeshky, M. Jalalvand, M.r. Wisnom, "The effect of the Weibull modulus on the shape of the stress-strain curves of thin-ply pseudo-ductile hybrid composites", Composites Part A-Applied Science and Manufacturing, vol. 188, no. 1, pp.108532-108532, 2025.

Behnam Anbarlooie, H. Hosseini Toudeshky, "Analysis of Intragranular and Intergranular Microcracks in DP Steels Using the Microstructural Images and Peridynamics Method", Amirkabir Journal of Mechanical Engineering, vol. 56, no. 6, pp.833-856, 2024.

H. Hosseini Toudeshky, "Damage mechanisms analyses in DP steels using SEM images, FEM, and nonlocal peridynamics methods", Mechanics of Advanced Materials and Structures, vol. 32, no. 7, pp.1549-1563, 2024.

M. Noghabi, I. Sattari Far, H. Hosseini Toudeshky, "The Effects of Welding Residual Stresses on Fatigue Crack Growth in Aluminum Alloy Plates", Welding In The World, vol. 0, no. 0, , 2023.

M. Saber, H. Hosseini Toudeshky, "Material Characterization of Glass/Siloxane Interface in Composite Materials", Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, vol. 1, no. 1, pp.1-12, 2023.

H. Hosseini Toudeshky, F. Sheibanian, P. Sabzi, Meisam Jalalvand, "Comprehensive progressive damage analyses of mixed-mode repaired panels: How composite patch sizes and layups affects restarting fatigue crack growth", Fatigue and Fracture of Engineering Materials and Structures, vol. 46, no. 9, pp.3244-3260, 2023.

H. Hosseini Toudeshky, A. Navaei, "Characterization of elastic modulus at glass/fiber interphase using single fiber composite tensile tests and utilizing DIC and FEM", Mechanics of Advanced Materials and Structures, vol. 1, no. 1, pp.1-12, 2023.

H. Hosseini Toudeshky, Milad Saeedifar, "The Effect of Interlaminar and Intralaminar Damage Mechanisms on the Quasi-Static Indentation Strength of Composite Laminates", Applied Composite Materials, vol. 30, no. 3, pp.1-16, 2023.

M. Jahanmardi, H. Hosseini Toudeshky, Mohammad Saeed Goodarzi, Erasmo Carrera, Alfonso Pagani, "Modified hyper-viscoelastic damage evolution constitutive model for polyurethane materials - an experimental and numerical investigation", Mechanics of Advanced Materials and Structures, vol. 1, no. 1, pp.1-12, 2023.

J. Nafardastgerdi, S.O. Jaberi, Heikki Remes, Pauli Lehto, H. Hosseini Toudeshky, Jukka Kuva, "Fatigue damage process of additively manufactured 316 L steel using X-ray computed tomography imaging", Additive Manufacturing, vol. 70, no. 103559, pp.1-18, 2023.

M. Saber, H. Hosseini Toudeshky, "Interphase characterization of glass/epoxy composite using peridynamic method and micro tensile test", Composite Interfaces, vol. 30, no. 8, pp.827-848, 2023.

M. Saber, H. Hosseini Toudeshky, "Interphase elastic modulus characterization in glass/epoxy composite using combined peridynamics and experimental method", Journal of Reinforced Plastics and Composites, vol. 1, no. 1, pp.1-12, 2023.

G. Ghamkhar, M. Safar Johari, H. Hosseini Toudeshky, Mahdi Bodaghi, "An experimentally validated model for predicting the tensile modulus of tubular biaxial and triaxial hybrid braids", Polymer Composites, vol. 43, no. 12, pp.9000-9011, 2022.

M. Jahanmardi, H. Hosseini Toudeshky, Mohammad Saeed Goodarzi, "Experimental hyperviscoelastic constitutive model for numerical study of elastomer materials", Applied Nanoscience, vol. 12, no. 11, pp.3655-3663, 2022.

H. Hosseini Toudeshky, M. Jannesari, "An investigation on creep life assessment of welded steam pipeline intersection using classical and progressive damage analyses", Welding In The World, vol. 66, no. 8, pp.1653-1664, 2022.

M. Noghabi, I. Sattari Far, H. Hosseini Toudeshky, "The study on the overloading effect on fatigue crack growth considering residual stress relaxation in Al 5456-H38", Mechanics Based Design of Structures and Machines, vol. 1, no. 1, pp.1-20, 2022.

G. Ghamkhar, M. Safar Johari, H. Hosseini Toudeshky, "An experimental and theoretical investigation into the effect of braiding angle and combination on a tensile modulus of the tubular biaxial hybrid braids", Journal of Industrial Textiles, vol. 0, no. 0, pp.1-20, 2022.

J. Nafardastgerdi, M. Lotf Yasouri, H. Hosseini Toudeshky, "Microstructure-sensitive investigation on the mechanical behavior of CNT-reinforced composites considering debonding damage based on cohesive finite element method", Materials Today Communications, vol. 31, no. 103458, pp.1-13, 2022.

M. Ahmadi, M. Sadighi, H. Hosseini Toudeshky, "Microstructure-based deformation and fracture modeling of particulate reinforced composites with ordinary state-based peridynamic theory", Composite Structures, vol. 279, no. 0, pp.1-10, 2022.

M. Noghabi, I. Sattari Far, H. Hosseini Toudeshky, "The study of redistribution in residual stresses during fatigue crack growth", Journal of Mechanical Engineering and Sciences, vol. 15, no. 4, pp.8565-8579, 2021.

M. Noghabi, I. Sattari Far, H. Hosseini Toudeshky, "Estimation of Fatigue Life in AI alloy Specimens Using FEA", , vol. 1, no. 1, pp.56-71, 2021.

M. Ahmadi, H. Hosseini Toudeshky, M. Sadighi, "Micro-mechanical damage analysis of Al-Tic particulate reinforced composites by Peridynamic theory", , vol. 53, no. 8, pp.13-23, 2021.

H. Hosseini Toudeshky, P. Parandavar, B. Anbarlooie, "Stress-strain prediction of dual phase steels using 3D RVEs considering both interphase hardness variation and interface debonding at grain boundaries", Archive of Applied Mechanics, vol. 92, no. 1, pp.255-270, 2021.

M. Ahmadi, Mohamad Fotouhi, H. Hosseini Toudeshky, M. Sadighi, "Damage behavior analysis of Al/TiC particulate composite by acoustic emission monitoring and peridynamic modeling", Composites Part C: Open Access, vol. 6, no. 100206, pp.1-10, 2021.

H. Hosseini Toudeshky, F. Abdorrezaei Amjad, "Sensor placement optimization for guided wave-based structural health monitoring", Structural Monitoring and Maintenance, vol. 8, no. 2, pp.125-150, 2021.

G. Ghamkhar, M. Safar Johari, H. Hosseini Toudeshky, "A review of the different standard methods of measuring the tubular braiding angle", Aut Journal of Mechanical Engineering, vol. 5, no. 5, pp.1-20, 2021.

M. Ahmadi, M. Sadighi, H. Hosseini Toudeshky, "Computational microstructural model of ordinary state-based Peridynamic theory for damage mechanisms, void nucleation, and propagation in DP600 steel", Engineering Fracture Mechanics, vol. 247, no. 0, pp.1-15, 2021.

J. Nafardastgerdi, F. Sheibanian, Heikki Remes, H. Hosseini Toudeshky, "Influences of Residual Stress, Surface Roughness and Peak-Load on Micro-Cracking: Sensitivity Analysis", Metals, vol. 11, no. 320, pp.1-19, 2021.

J. Nafardastgerdi, F. Sheibanian, Heikki Remes, Pauli Lehto, H. Hosseini Toudeshky, "Numerical modelling approach for considering effects of surface integrity on micro-crack formation", Journal of Constructional Steel Research, vol. 175, no. 106387, pp.1-13, 2020.

M. Ahmadi, H. Hosseini Toudeshky, M. Sadighi, "Peridynamic micromechanical modeling of plastic deformation and progressive damage prediction in dual-phase materials", Engineering Fracture Mechanics, vol. 235, no. 107179, , 2020.

Mohammad Saeed Goodarzi, H. Hosseini Toudeshky, Hadi Ghashochi-bargh, "Nanoindentation characterization of Glass/Epoxy composite for viscoelastic damage interlaminar modeling", Engineering Fracture Mechanics, vol. 226, no. 3, pp.106873-106883, 2020.

J. Ebadi Rajoli, Akhavan-safar, H. Hosseini Toudeshky, Da Silva, "progressive damage modeling composite materials subjected to mixed mode cyclic loading using cohesive zone model", Mechanics of Materials, vol. 143, no. 2020, pp.103322-103333, 2020.

H. Hosseini Toudeshky, F. Sheibanian, H.R. Ovesy, "Prediction of interlaminar fatigue damage in adhesively bonded joints using mixed mode strain based cohesive zone modelling", Theoretical and Applied Fracture Mechanics, vol. 106, no. 0, , 2020.

Pakdel, Bigan Mohammadi, H. Hosseini Toudeshky, "stress and energy based prediction of crack distribution pattern in general cross-ply laminates", Engineering Fracture Mechanics, vol. 223, no. 1, pp.1-15, 2020.

Rashtiani, H. Hosseini Toudeshky, Mondali, "analytical study of transverse cracking in cross-ply laminates under combined loading based on a new coupled micro-meso approach", Mechanics of Materials, vol. 139, no. 103149, pp.103-149, 2019.

Ali Mahmiodi, Bigan Mohammadi, H. Hosseini Toudeshky, "damage behaviour of laminated composites during fatigue loading", Fatigue and Fracture of Engineering Materials and Structures, vol. 43, no. 4, pp.698-710, 2019.

H. Hosseini Toudeshky, B. Anbarlooei, S.M. Hosseini Imeni, "Micromechanical failure analysis and tensile behavior of dual phase steel using 2D and 3D RVEs", , vol. 51, no. 3, pp.21-30, 2019.

B. Hamidi Ghaleh Jigh, H. Hosseini Toudeshky, Farsi, "low cycle fatigue analyses of open-celled aluminum foam under compression-compression loading using experimental and microstructure finite element analysis", Journal of Alloys and Compounds, vol. 797, no. 0, pp.231-236, 2019.

B. Anbarlooie, H. Hosseini Toudeshky, S.M. Hosseini Imeni, Kadkhodapour, "experimental and 3D micromechanical analysis of stress-strain behavior and damage initiation in dual-phase steels", Journal of Materials Engineering and Performance, vol. 28, no. 5, pp.2903-2918, 2019.

N. Akbari Shahkhosravi, J. Yousefi, M. Ahmadi Najafabadi, Giangiacomo Minak, H. Hosseini Toudeshky, F. Sheibanian, "Static strength and damage evaluation of high speed drilled composite material using acoustic emission and finite element techniques", Engineering Fracture Mechanics, vol. 210, no. 0, pp.470-485, 2019.

B. Anbarlooei, H. Hosseini Toudeshky, "Peridynamic micromechanical prediction of nonlocal damage initiation and propagation in DP steels based on real microstructure", International Journal of Mechanical Sciences, vol. 153-154, no. 0, pp.64-74, 2019.

H. Hosseini Toudeshky, S. Seyedzadeh, M. Ghayour, "Simple and fast method to calculate shape factors of stiffened panels repaired with composites", Journal of Aerospace Engineering, vol. 32, no. 3, pp.1-10, 2019.

M. Ghayour, Nasim Chitsaz, H. Hosseini Toudeshky, Ever J. Barbero, "Enhanced variational approach for damage analysis of laminated composite", Mechanics of Advanced Materials and Structures, vol. 27, no. 17, pp.1483-1493, 2019.

J. Nafar Dastjerdi, B. Anbarlooei, A. Miettinen, H. Hosseini Toudeshky, H. Remes, "Effects of particle clustering on the plastic deformation and damage initiation of particulate reinforced composite utilizing X-ray CT data and finite element modeling", Composites Part B-Engineering, vol. 153, no. 0, pp.57-69, 2018.

M. Saeedifar, M. Ahmadi Najafabadi, Dimitrios Zarouchas, H. Hosseini Toudeshky, Meisam Jalalvand, "Barely visible impact damage assessment in laminated composites using acoustic emission", Composites Part B-Engineering, vol. 152, no. 0, pp.180-192, 2018.

B. Hamidi Ghaleh Jigh, Mohammad Ali Farsi, H. Hosseini Toudeshky, "Prediction of the stress-strain behavior of open-cell aluminum foam under compressive loading and the effect of various RVE boundary conditions", Journal of Materials Engineering and Performance, vol. 25, no. 5, pp.2576-2585, 2018.

S. Asghari Mooneghi, A. Gharehaghaji, H. Hosseini Toudeshky, Giti Torkaman, "Effect of fatigue loading on wicking properties of polyamide 66 nanofiber yarns", Journal of Applied Polymer Science, vol. 136, no. 11, pp.1-8, 2018.

F. Mazaheri Torei, H. Hosseini Toudeshky, "Experimental investigations of static and fatigue crack growth in sandwich structures with foam core and fiber-metal laminates face sheets", Aut Journal of Mechanical Engineering, vol. 2, no. 2, pp.149-164, 2018.

R. Hedayati, H. Hosseini Toudeshky, M. Sadighi, M. Mohammadi Aghdam, Amir A Zadpoor, "Multiscale modeling of fatigue crack propagation in additively manufactured porous biomaterials", International Journal of Fatigue, vol. 113, no. 0, pp.416-427, 2018.

J. Nafardastgerdi, B. Anbarlooie, Arttu Miettinen, H. Hosseini Toudeshky, Heikki Remes, "Effect of particle clustering on the plastic deformation and damage initiation of particle reinforced composite utilizing X-ray CT data and finite element modeling", Composites Part B-Engineering, vol. 153, no. 0, pp.57-69, 2018.

A. Nazari, M.Z. Kabir, H. Hosseini Toudeshky, "Development of work-hardening performance in stainless-steel cylindrical columns bu application of CFRP jackets", Composite Structures, vol. 203, no. 0, pp.38-49, 2018.

A. Nazari, M.Z. Kabir, H. Hosseini Toudeshky, "Evaluation of enhancement in the mechanical properties of the glass/vinylester composite laminates under flexural load using progressive failure analysis", Journal of Sciences and Technology of Composites, vol. 5, no. 1, pp.51-60, 2018.

M. Nikbakht, J. Yousefi, H. Hosseini Toudeshky, G. Minak, "Delamination evaluation of composite laminates with different interface fiber orientations using acoustic emission features and micro visualization", Composites Part B-Engineering, vol. 113, no. 1, pp.185-196, 2018.

B. Hamidi Ghaleh Jigh, H. Hosseini Toudeshky, Mohammad Ali Farsi, "Experimental and multi-scale analyses of open-celled aluminum foam with hole under compressive quasi-static loading", Journal of Alloys and Compounds, vol. 695, no. 1, pp.133-141, 2018.

Mohammad Saeed Goodarzi, H. Hosseini Toudeshky, "Modified DEBA for determining size dependent shear fracture energy of laminates", Steel and Composite Structures, vol. 28, no. 1, pp.111-121, 2018.

M. Saeedifar, M. Ahmadi Najafabadi, Dimitrios Zarouchas, H. Hosseini Toudeshky, Meisam Jalalvand, "Clustering of Interlaminar and Intralaminar damages in Laminated Composites under Indentation Loading using Acoustic Emission", Composites Part B-Engineering, vol. 144, no. 0, pp.206-219, 2018.

M. Saeedifar, M. Ahmadi Najafabadi, Kaivan Mohammadi, Mohamad Fotouhi, H. Hosseini Toudeshky, R. Mohammadi, "Acoustic Emission-Based Methodology to Evaluate Delamination Crack Growth Under Quasi-static and Fatigue Loading Conditions", Journal of Nondestructive Evaluation, vol. 37, no. 1, pp.1-13, 2018.

Ali Koochi, H. Hosseini Toudeshky, M. Abadian, "A corrected model for static and dynamic electromechanical instability of narrow nanotweezers: incorporation of size effect, surface layer and finite dimensions", International Journal of Modern Physics B, vol. 32, no. 8, pp.185008-185032, 2017.

J. Yousefi, M. Ahmadi Najafabadi, H. Hosseini Toudeshky, M. Akhlaghi, "Damage evaluation of laminated composite material using a new acoustic emission Lamb-based and finite element techniques", Applied Composite Materials, vol. 0, no. 0, pp.1-20, 2017.

M.M. Mousavi Nasab, Hamid Fotouhi, R. Mohammadi, M. Ahmadi Najafabadi, H. Hosseini Toudeshky, "Investigation of failure mechanisms of notched aluminum plates repaired with composite patches using acoustic emission method", , vol. 17, no. 8, pp.406-412, 2017.

R. Mohammadi, M. Saeedifar, M. Ahmadi Najafabadi, H. Hosseini Toudeshky, "Acoustic Emission Based Methodology to Evaluate the Fracture Toughness in Carbon/Epoxy Composites", , vol. 49, no. 2, pp.379-386, 2017.

A. Nazari, M.Z. Kabir, H. Hosseini Toudeshky, Y. Alizadeh Vaghasloo, Sepideh Najafian, "Investigation of progressive failure in the composite sandwich panels with elastomeric foam core under concentrated loading", Journal of Sandwich Structures and Materials, vol. 0, no. 0, pp.1-31, 2017.

M. Nikbakht, H. Hosseini Toudeshky, Bijan Mohammadi, "Experimental validation of an empirical nonlinear shear failure model for laminated composite materials", Journal of Composite Materials, vol. 51, no. 16, pp.2331-2345, 2017.

A. Nazari, M.Z. Kabir, H. Hosseini Toudeshky, "On the decreasing flexural modulus of glass/vinylester composite beams up to failure state", Latin American Journal of Solids and Structures, vol. 0, no. 0, pp.1464-1489, 2017.

A. Nazari, H. Hosseini Toudeshky, M.Z. Kabir, "Experimental investigation on the sandwich composite beams and panels with elastomeric foam core", Journal of Sandwich Structures and Materials, vol. 1, no. 1, pp.1-30, 2017.

A. Nazari, M.Z. Kabir, H. Hosseini Toudeshky, "Investigation of Elastomeric foam response applied as core for composite sandwich beams through progressive failure of the beams", Journal of Sandwich Structures and Materials, vol. 0, no. 0, pp.1-35, 2017.

Amin Farrokhabadi, Bijan Mohammadi, H. Hosseini Toudeshky, "A generalized plane-strain crack density-based model for evaluating the finite fracture toughness of composite laminates", Mechanics of Advanced Materials and Structures, vol. 24, no. 2, pp.131-141, 2017.

A. Koochi, H. Hosseini Toudeshky, M Abadian, "A modified model for stability analysis of narrow-width NEMS tweezers: corrections due to surface layer, scale dependency, and force distributions", Scientia Iranica, vol. 24, no. 2, pp.673-683, 2017.

M. Goodarzi, H. Hosseini Toudeshky, "Viscoelastic-damage interface model formulation with friction to simulate the delamination growth in mode II", Mechanics of Time-Dependent Materials, vol. -, no. 0, pp.1-14, 2017.

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, H. Hosseini Toudeshky, "Comparison of elastic properties of open?cell metallic biomaterials with different unit cell types", Journal of Biomedical Materials Research Part B-Applied Biomaterials, vol. 0, no. 0, pp.1-13, 2017.

M. Yadollahpour, H. Hosseini Toudeshky, "Material properties and failure prediction of ultrafine grained materials with bimodal grain size distribution", Engineering With Computers, vol. 33, no. 1, pp.131-141, 2017.

B. Anbarlooie, H. Hosseini Toudeshky, Javad Kadkhodapour, "High cycle fatigue micromechanical behavior of dual phase steel: Damage initiation, propagation and final failure", Mechanics of Materials, vol. 106, no. 106, pp.8-19, 2017.

M. Saeedifar, M. Ahmadi Najafabadi, J. Yousefi, R. Mohammadi, H. Hosseini Toudeshky, Giangiacomo Minak, "Delamination Analysis in Composite Laminates by means of Acoustic Emission and Bi-linear/Tri-linear Cohesive Zone Modeling", Composite Structures, vol. 161, no. 0, pp.505-512, 2016.

M. Nikbakht, H. Hosseini Toudeshky, B. Mohammadi, "Experimental study on the effect of interface fiber orientation and utilized delamination initiation techniques on fracture toughness of glass/epoxy composite laminates", Journal of Reinforced Plastics and Composites, vol. 35, no. 23, pp.1722-1733, 2016.

M. Saeedifar, M. Ahmadi Najafabadi, H. Hosseini Toudeshky, R. Mohammadi, "Investigation of delaminiation initiation and propagation in glass/epoxy composites with acoustic emission technique", , vol. 48, no. 8, pp.411-422, 2016.

M. Goodarzi, H. Hosseini Toudeshky, Meisam Jalavand, "Shear-Mode Viscoelastic Damage Formulation Interface Element", Key Engineering Materials, vol. 713, no. 1, pp.167-170, 2016.

A. Koochi, H. Hosseini Toudeshky, M. Abadian, "Nonlinear beam formulation incorporating surface energy and size effect application in nano-bridges", Journal of Applied Mathematics and Mechanics, vol. 37, no. 5, pp.583-600, 2016.

M. Noghabi, I. Sattari Far, H. Hosseini Toudeshky, "The Effect of Fatigue Crack Growth on Mechanical Residual Stress Redistribution", , vol. 27, no. 2, pp.1-10, 2016.

M. Yadollahpour, H. Hosseini Toudeshky, ّf. Karimzadeh, "Effect of cryorolling and aging on fatigue behavior of ultrafine-grained Al6061", Jom, vol. 68, no. 5, pp.1146-1455, 2016.

M. Ahmadi Najafabadi, H. Hosseini Toudeshky, M. Sadighi, "Damage Monitoring of aluminum sheet repaired with fiber metal laminate patch by acoustic emission", , vol. 16, no. 2, pp.1-9, 2016.

S. Ghalehbandi, A. Fallahi Arezodar, H. Hosseini Toudeshky, "Fatigue crack growth resistance of 7075 Al alloy after equal channel angular pressing", Fatigue and Fracture of Engineering Materials and Structures, vol. 0, no. 0, pp.1-12, 2016.

M. Saeedifar, M. Fotouhi, M. Ahmadi Najafabadi, H. Hosseini Toudeshky, Giangiacomo Minak, "Prediction of quasi-static delamination onset and growth in laminated composites by Acoustic Emission", Composites Part B-Engineering, vol. 85, no. 0, pp.113-122, 2016.

M. Yadollahpour, H. Hosseini Toudeshky, F. Karimzadeh, "The use of response surface methodology in cryrolling of ultrafine grained AL6061 to improve the mechanical properties", Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, vol. 230, no. 2, pp.400-417, 2016.

G. Sadeghi, H. Hosseini Toudeshky, "Energy-based analysis of transverse cracking and induced delamination in [s/90n/s]s laminates: A variational approach", International Journal For Multiscale Computational Engineering, vol. 13, no. 6, pp.475-490, 2015.

R. Hedayati, H. Hosseini Toudeshky, M. Sadighi, M. Mohammadi Aghdam, Amir Abbas Zadpoor, "Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials", International Journal of Fatigue, vol. 84, no. 0, pp.67-79, 2015.

S. Ghalehbandi, A. Fallahi Arezodar, H. Hosseini Toudeshky, "Influence of aging on mechanical properties of equal channel angular pressed aluminum alloy 7075", Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, vol. 0, no. 0, pp.1-9, 2015.

M. Ahmadi Najafabadi, M. Sadighi, M. Salehi, H. Hosseini Toudeshky, "Investigation and monitoring of delamination in FMLs under mode I and II loading with FEM and AE", , vol. 15, no. 9, pp.78-86, 2015.

J. Yousefi, R. Mohammadi, M. Saeedifar, M. Ahmadi Najafabadi, H. Hosseini Toudeshky, "Delamination characterization in composite laminates using acoustic emission features, micro visualization and finite element modeling", Journal of Composite Materials, vol. 0, no. 0, pp.1-13, 2015.

Amin Farrokhabadi, Bijan Mohammadi, H. Hosseini Toudeshky, "A simplified micromechanics model for predicting the stiffness degradation in symmetric composite laminates", Fatigue and Fracture of Engineering Materials and Structures, vol. 38, no. 11, pp.1334-1346, 2015.

M.M. Mousavi Nasab, M. Saeedifar, M. Ahmadi Najafabadi, H. Hosseini Toudeshky, "Investigation of delamination in laminated composites under quasi-static and fatigue loading conditions by acoustic emission", , vol. 15, no. 8, pp.85-92, 2015.

M. Ghayour, H. Hosseini Toudeshky, M. Jalalvand, Ever J.barbero, "Micro/macro approach for prediction of matrix cracking evolution in laminated composites", Journal of Composite Materials, vol. 50, no. 19, pp.2647-2659, 2015.

A. Koochi, H. Hosseini Toudeshky, "Couple effect of surface energy and size effect on the static and dynamic pull-in instability of narrow nano-switches", International Journal of Applied Mechanics, vol. 7, no. 4, , 2015.

H. Hosseini Toudeshky, M. Jamalian, "Simulation of micromechanical damage to obtain mechanical properties of bimodal Al using XFEM", Mechanics of Materials, vol. 1, no. 89, pp.229-240, 2015.

F. Mazaheri Torei, H. Hosseini Toudeshky, "Low-cycle fatigue delamination initiation and propagation in fiber metal laminates", Fatigue and Fracture of Engineering Materials and Structures, vol. 38, no. 6, pp.641-660, 2015.

R. Mohammadi, M. Saeedifar, H. Hosseini Toudeshky, M. Ahmadi Najafabadi, M. Fotouhi, "Prediction of delamination growth in carbon/epoxy composites using a novel acoustic emission-based approach", Journal of Reinforced Plastics and Composites, vol. 0, no. 0, pp.1-11, 2015.

H. Hosseini Toudeshky, B. Anbarlooie, Javad Kadkhodapour, "Micromechanics stress-strain behavior prediction of dual phase steel considering plasticity and grain boundaries debonding", Materials and Design, vol. 68, no. 1, pp.167-178, 2015.

100

H. Hosseini Toudeshky, M. Jahanmardi, M. Goodarzi, "Progressive debonding analysis of composite blade rot joint of wind turbine under fatigue loading", Composite Structures, vol. 120, no. 2, pp.417-427, 2015.

101

Bijan Mohammadi, Hamed Olia, H. Hosseini Toudeshky, "Intra and damage analysis of laminated composites using coupled continuum damage mechanics with cohesive interface layer", Composite Structures, vol. 120, no. 120, pp.519-530, 2015.

102

S. Asghari Mooneghi, A. Gharehaghaji, H. Hosseini Toudeshky, Giti Torkaman, "Failure mechanism of polyamide 66 nanofiber yarns under fatigue and static tensile loading", Journal of Applied Polymer Science, vol. 1, no. 1, pp.1-11, 2015.

103

M. Saeedifar, M. Fotouhi, M. Ahmadi Najafabadi, H. Hosseini Toudeshky, "Prediction of delamination growth in laminated composites using acoustic emission and cohesive zone modeling techniques", Composite Structures, vol. 124, no. 0, pp.120-127, 2015.

104

M. Saeedifar, M. Fotouhi, M. Ahmadi Najafabadi, H. Hosseini Toudeshky, "Interlaminar Fracture Toughness Evaluation in Glass/Epoxy Composites Using Acoustic Emission and Finite Element Methods", Journal of Materials Engineering and Performance, vol. 0, no. 0, pp.1-12, 2014.

105

S. Asghari Mooneghi, A. Gharehaghaji, H. Hosseini Toudeshky, Giti Torkaman, "Tensile Fatigue Behavior of Polyamide 66 Nanofiber Yarns", Polymer Engineering and Science, vol. 1, no. 1, pp.1-7, 2014.

106

M. Ahmadi Najafabadi, M. Sadighi, M. Salehi, H. Hosseini Toudeshky, "Analysis and detection of failure in aluminium/E-glass prepreg interface with acoustic emission", , vol. 1, no. 1, pp.13-22, 2014.

107

Meisam Jalalvand, Michael R. Wisnom, H. Hosseini Toudeshky, Bijan Mohammadi, "Experimental and numerical study of oblique transverse cracking in cross-ply laminates under tension", Composites Part A-Applied Science and Manufacturing, vol. 67, no. 67, pp.140-148, 2014.

108

Javad Kadkhodapour, B. Anbarlooie, H. Hosseini Toudeshky, S. Schmauder, "Simulation of shear failure in dual phase steels using localization criteria and experimental observation", Computational Materials Science, vol. 94, no. 94, pp.106-113, 2014.

109

M. Hajikazemi, M.H. Sadr Lahidjani, H. Hosseini Toudeshky, Bijan Mohammadi, "Thermo-elastic constants of cracked symetric laminate: A refined variational approach", International Journal of Mechanical Sciences, vol. 1, no. 1, pp.1-1, 2014.

110

M. Saeedifar, M. Fotouhi, R. Mohammadi, M. Ahmadi Najafabadi, H. Hosseini Toudeshky, "Investigation of delamination and interlaminar fracture toughness assessment of glass/epoxy composite by acoustic emission", , vol. 14, no. 4, pp.1-11, 2014.

111

A. Kabiri Ataabadi, H. Hosseini Toudeshky, S. Ziaei Rad, "Experimental and analytical study on fiber-kinking failure mode of laminated composites", Composites Part B-Engineering, vol. 61, no. 61, pp.84-93, 2014.

112

H. Hosseini Toudeshky, B. Anbarlooie, Javad Kadkhodapour, Ghasem Shadalooyi, "Microstructural deformation pattern and mechanical behavior analyses of DP600 dual phase steel", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 600, no. 600, pp.108-121, 2014.

113

G. Sadeghi, H. Hosseini Toudeshky, Bijan Mohammadi, "An investigation of matrix cracking damage evolution in composite laminates - Development of an advanced numerical tool", Composite Structures, vol. 108, no. 108, pp.937-950, 2014.

114

G. Sadeghi, H. Hosseini Toudeshky, Bijan Mohammadi, "In-plane progressive matrix cracking analysis of symmetric cross-ply laminates with holes", Fatigue and Fracture of Engineering Materials and Structures, vol. 37, no. 37, pp.290-305, 2014.

115

A. Fallahi Arezodar, H. Hosseini Toudeshky, S. Ghalehbandi, "Effect of heat treatment on mechanical properties of ECAPed 7075 aluminum alloy", Advanced Materials Research, vol. 829, no. 0, pp.62-66, 2014.

116

H. Hosseini Toudeshky, M. Goodarzi, Bijan Mohammadi, "Prediction of through the width delamination growth in post-buckled laminates under fatigue loading using de-cohesive law", Structural Engineering and Mechanics, vol. 48, no. 1, pp.41-56, 2013.

117

H. Hosseini Toudeshky, A. Jasem Zadeh, Bijan Mohammadi, "Investigation of effective parameters on composite patch debonding under static and cyclic loading using cohesive elements", Finite Elements In Analysis and Design, vol. 74, no. 7, pp.67-75, 2013.

118

M. Jalalvand, H. Hosseini Toudeshky, Bijan Mohammadi, "Numerical Modeling of Diffuse Transverse Cracks and Induced Delamination using Cohesive Elements", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 227, no. 7, pp.1392-1405, 2013.

119

H. Hosseini Toudeshky, M. Sadighi, A. Vojdani, "Effects of curing thermal residual stresses on fatigue crack propagation of aluminum plates repaired by FML patches", Composite Structures, vol. 100, no. 0, pp.154-162, 2013.

120

M. Jalalvand, H. Hosseini Toudeshky, B. Mohammadi, "Homogenization of diffuse delamination in composite laminates", Composite Structures, vol. 1, no. 100, pp.113-120, 2013.

121

H. Hosseini Toudeshky, B. Mohammadi, P. Saniei, "Fatigue multi-cracks growths in plates using J-integral approach with a developed home FEM software", Key Engineering Materials, vol. 560, no. 1, pp.61-70, 2013.

122

A. Koochi, H. Hosseini Toudeshky, H.R. Ovesy, Mohammadreza Abadian, "Modeling the Influence of surface Effect on Instability of Nano-Cantilever in Presence of Van Der Waals Force", International Journal of Structural Stability and Dynamics, vol. 13, no. 4, pp.721-7219, 2013.

123

M.A. Ghaffari Gharehbagh, H. Hosseini Toudeshky, "Fatigue crack propagation analysis of repaired pipes with composite patch under cyclic pressure", Journal of Pressure Vessel Technology-Transactions of The Asme, vol. 135, no. 3, pp.4021-4029, 2013.

124

H. Hosseini Toudeshky, M.A. Ghaffari Gharehbagh, Bijan Mohammadi, "Mixed-mode crack propagation of stiffened curved panels repaired by composite patch under combined tension and shear cyclic loading", Aerospace Science and Technology, vol. 28, no. 3, pp.344-363, 2013.

125

A. Farrokhabadi, H. Hosseini Toudeshky, Bijan Mohammadi, "Development of a damage analysis method in laminated composites using finite fracture toughness of single lamina", Mechanics of Advanced Materials and Structures, vol. 20, no. 2, pp.177-188, 2013.

126

H. Hosseini Toudeshky, M. Goodarzi, B. Mohammadi, "Multiple Delaminations growth in composite laminates under compressive cyclic loading in post-buckling", Applied Mechanics and Materials, vol. 225, no. 1, pp.195-200, 2012.

127

H. Hosseini Toudeshky, M.A. Ghaffari Gharehbagh, B. Mohammadi, "Composite repair of curved stiffened aluminum panels under combined tension and shear cyclic loadings", Applied Mechanics and Materials, vol. 225, no. 1, pp.219-224, 2012.

128

H. Hosseini Toudeshky, A. Farrokhabadi, B. Mohammadi, "Implementation of a micro-meso approach for progressive damage analysis of composite laminates", Structural Engineering and Mechanics, vol. 43, no. 5, pp.657-678, 2012.

129

H. Hosseini Toudeshky, A. Farrokhabadi, B. Mohammadi, "Consideration of concurrent transverse cracking and induced delamination propagation using a generalized micro-meso approach and experimental validation", Fatigue and Fracture of Engineering Materials and Structures, vol. 35, no. 1, pp.885-901, 2012.

130

H. Hosseini Toudeshky, M.A. Ghaffari Gharehbagh, "A Simple Method to Estimate the Fatigue Crack Growth Life of Repaired Pipes with Composite Patches", Applied Mechanics and Materials, vol. 1, no. 152, pp.387-392, 2012.

131

H. Hosseini Toudeshky, E. Fadaei, "Effects of Composite Patch Geometry on Collapse Load of Pressurized Steel Pipes with Internal Longitudinal Flaws", Applied Mechanics and Materials, vol. 1, no. 152, pp.381-386, 2012.

132

H. Hosseini Toudeshky, M.A. Ghaffari Gharehbagh, B. Mohammadi, "Finite element fatigue propagation of induced cracks by stiffeners in repaired panels with composite patches", Composite Structures, vol. 94, no. 1, pp.1771-1780, 2012.

133

H. Hosseini Toudeshky, A. Jasem Zadeh, Bijan Mohammadi, "Fatigue Debonding Analysis of Repaired Aluminum Panels by Composite Patch using Interface Elements", Applied Composite Materials, vol. 18, no. 18, pp.571-584, 2011.

134

A. Kabiri, S. Ziaei-rad, H. Hosseini Toudeshky, "Compression failure and fiber-kinking modeling of laminated composites", Steel and Composite Structures, vol. 12, no. 1, pp.53-72, 2011.

135

H. Hosseini Toudeshky, A. Farrokhabadi, Bijan Mohammadi, "Analysis of damage events in quasi-isotropic laminates using a generalized micromechanicas approach", Procedia Engineering, vol. 1, no. 10, pp.236-241, 2011.

136

H. Hosseini Toudeshky, M.A. Ghaffari Gharehbagh, Bijan Mohammadi, "Fatigue propagation of induced cracks by stiffeners in repaired panels with composite patches", Procedia Engineering, vol. 1, no. 10, pp.3285-3290, 2011.

137

Abdulreza Kabiri, Saeed Ziaei Rad, H. Hosseini Toudeshky, "An Improved Model for Fiber Kinking Analysis of Unidirectional Laminated Composites", Applied Composite Materials, vol. 1, no. 18, pp.175-196, 2011.

138

H. Hosseini Toudeshky, A. Jasem Zadeh, Bigan Mohammadi, "Fatigue Delamination Analysis of Composite Laminates with a central Hole using Interface Elements", Key Engineering Materials, vol. 1, no. 471, pp.568-571, 2011.

139

H. Hosseini Toudeshky, M. Jalalvand, M. Ghayour, "Numerical Aspects of delamination Modeling using Interface Elements", Key Engineering Materials, vol. 1, no. 471, pp.606-609, 2011.

140

H. Hosseini Toudeshky, A. Farrokhabadi, Bijan Mohammadi, "Progressive Damage Analyses of Composite Laminates Exhibiting Free Edge Effects Using a New Micro-Meso Approach", Key Engineering Materials, vol. 1, no. 471, pp.263-267, 2011.

141

H. Hosseini Toudeshky, M. Karimi, B. Mohammadi Sangjouey, "Acoustic Fatigue Crack Growth Prediction in Coupled Air Structures", Key Engineering Materials, vol. 452, no. 0, , 2011.

142

A. Farrokhabadi, H. Hosseini Toudeshky, Bijan Mohammadi, "A Generalized Micromechanical Approach for the Analysis of Transverse Crack and Induced Delamination in Composite Laminates", Composite Structures, vol. 93, no. 0, pp.443-455, 2011.

143

H. Hosseini Toudeshky, F. Mazaheri Torei, B. Mohammadi Sangjouey, "Progressive Damage Analysis of Laminated Composites using Element Free Galerkin Method", Advanced Materials Research, vol. 123, no. 0, , 2010.

144

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, "Coupling of Continuum Damage Mechanics with De-cohesive Element for Delamination Analysis in Laminated Composites", Advanced Material Research, vol. 123, no. 0, , 2010.

145

H. Hosseini Toudeshky, A. Farrokhabadi, Bijan Mohammadi, "Damage Analysis of Laminated Composites using a New Coupled Micro-meso Approach", Fatigue and Fracture of Engineering Materials and Structures, vol. 33, no. 7, pp.420-435, 2010.

146

H. Hosseini Toudeshky, S. Hosseini, Bijan Mohammadi, "Delamination Buckling Growth in Laminated Composites using Layerwise-interface Element", Composite Structures, vol. 92, no. 0, pp.1846-1856, 2010.

147

H. Hosseini Toudeshky, S. Hoseini, B. Mohammadi Sangjouey, "Progressive Delamination Growth Analysis using Discontinuous Layered Element", Composite Structures, vol. 92, no. 0, , 2010.

148

H. Hosseini Toudeshky, S. Hosseini, B. Mohammadi Sangjouey, "Buckling and Delamination Growth Analysis of Composite Laminates Containing Embedded Delaminations", Applied Composite Materials, vol. 17, no. 2, , 2010.

149

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Failure analysis of laminates by implementation of continuum damage mechanics in layer-wise finite element theory", Structural Engineering and Mechanics, vol. 33, no. 6, , 2009.

150

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, "Mixed-mode numerical and experimental fatigue crack growth analyses of thick aluminium panels repaired with composite patches", Composite Structures, vol. , no. 91, , 2009.

151

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Progressive Damage Analysis of Laminated Composites Using Continuum Damage Mechanics", Journal of Aerospace Science and Technology, vol. 6, no. 2, , 2009.

152

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, "Failure analysis of laminates by implementation of continuum damage mechanics in layer-wise fiite element theory", Structural Engineering and Mechanics, vol. 33, no. 6, , 2009.

153

H. Hosseini Toudeshky, A. Sohrabi Mollayousef, B. Mohammadi Sangjouey, "Delamination analysis of holed composite laminates using interface elements", Procedia Engineering, vol. 0, no. 1, , 2009.

154

H. Hosseini Toudeshky, A. Farrokhabadi, B. Mohammadi Sangjouey, "Transverse crack density evolution in a single orthotropic lamina under multi-axial stresses using analytical method", Procedia Engineering, vol. 0, no. 1, , 2009.

155

M. Musivand Arzanfudi, H. Hosseini Toudeshky, "Development of the extended parametric meshless Galerkin method to predict the crack propagation path in two-dimensional damaged structures", , vol. , no. 7, , 2009.

156

H. Hosseini Toudeshky, M.R. Mofakhami, R. Yarmohammadi, "Sound Transmission Between Partitioned Contiguous Enclosures", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. , no. 223, , 2009.

157

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, "Thermal residual stresses effects on fatigue crack growth of repaired panels bounded with various composite materials", Composite Structures, vol. , no. 89, , 2009.

158

H. Hosseini Toudeshky, M.R. Mofakhami, "Sound transmission into a thick hollow cylinder with the fixed-end boundary condition", Applied Mathematical Modelling, vol. , no. 33, , 2009.

159

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Free-Edge Effects Analysis of Angle -Ply Laminates Under Transverse Loading Using Layer -Wise Finite -Element Method With Semi-Analytical Shear Stress Calculation", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. , no. 223, , 2009.

160

H. Hosseini Toudeshky, M. Saber, B. Mohammadi Sangjouey, "Finite element crack propagation of adhesively bonded repaired panels in general mixed-mode conditions", Finite Elements In Analysis and Design, vol. , no. 45, , 2009.

161

H. Hosseini Toudeshky, M. Saber, B. Mohammadi Sangjouey, "Mixed -Mode 3-D Crack Propagation of Repaired Thin Aluminium Panels Using Single-Side Composite Patches", International Journal of Fracture, vol. , no. 153, , 2008.

162

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Progressive Damage Analyses of Angle -Ply Laminates Exhibiting Free Edge Effects Using Continuum Damage Mechanics With Layer-Wise Finite Element Method", , vol. , no. 31, , 2008.

163

H. Hosseini Toudeshky, A. Sohrabi Mollayousef, B. Mohammadi Sangjouey, "Delamination of Laminates Governed by Free Edge Interlaminar Stressess Using Interface Element", Key Engineering Materials, vol. 0, no. 1, , 2008.

164

M.R. Mofakhami, H. Hosseini Toudeshky, "Noise Reduction Evaluation of Multi -Layered Viscoelastic Infinite Cylinder Under Acoustical Wave Excitation", Shock and Vibration, vol. , no. 15, , 2008.

165

H. Hosseini Toudeshky, M. Shambooli, B. Mohammadi Sangjouey, "Experimental Investigations on The Effects of Thermal Residual Stresses on the Efficiency of Repaired Panels With Glass/Epoxy Composite Patch", Key Engineering Materials, vol. 0, no. 1, , 2008.

166

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Damage Evolution of Laminated Composites Using Continuum Damage Mechanics Incorporate With Interface Element", Key Engineering Materials, vol. 0, no. 1, , 2008.

167

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, "Crack Trajectory Analysis of Single -Side Repaired Thin Panels in Mixed -Mode Conditions Using Glass/Epoxy Patches", Computers and Structures, vol. , no. 86, , 2008.

168

H. Hosseini Toudeshky, M. Saber, B. Mohammadi Sangjouey, "Real 3D Crack-Front and Crack Trajectory analyses of Single -Side Repaired Thick Aluminium Panels", , vol. 0, no. 47, , 2008.

169

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Prediction of Inelastic Behavior of Composite Laminates Using Multi-Surface Continuum Damage -Plasticity", , vol. 0, no. 47, , 2008.

170

H. Hosseini Toudeshky, M. Musivand Arzanfudi, "Fracture Analysis Using Parametric Meshless Galerkin Method", , vol. , no. 31, , 2008.

171

M. Musivand Arzanfudi, H. Hosseini Toudeshky, "Moving Least -Squares Finite Element Method", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. , no. 221, , 2007.

172

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, "A Simple Method to Calculate The Crack Growth Life of Adhesively Repaired Aluminum Panels", Composite Structures, vol. , no. 79, , 2007.

173

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, G. Sadeghi, H. Daghyani, "Numerical and experimental fatigue crack growth analysis in mode-I for repaired aluminum panels using composite material", Composites Part A-Applied Science and Manufacturing, vol. , no. 38, , 2007.

174

M. Musivand Arzanfudi, H. Hosseini Toudeshky, "Extended Parametric Meshless Galerkin Method", Computer Methods In Applied Mechanics and Engineering, vol. , no. 196, , 2007.

175

H. Hosseini Toudeshky, "Effects of Composite Patches on Fatigue Crack Propagation of Single- Side Repaired Aluminum Panels", Composite Structures, vol. , no. 76, , 2006.

176

M.R. Mofakhami, H. Hosseini Toudeshky, "Finite Cylinder Vibrations With Different end Boundary Conditions", Journal of Sound and Vibration, vol. , no. 297, , 2006.

177

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, B. Hamidi Ghaleh Jigh, H.R. Ovesy, "Analysis of Composite Skin/ Stiffener Debounding and Failure Under Uniaxial Loading", Composite Structures, vol. 0, no. 75, , 2006.

178

H. Hosseini Toudeshky, , B. Mohammadi Sangjouey, H. Daghyani, "Experimental Investigations On Fatigue Crack Growth of Repaired Thick Aluminium Panels in Mixed - Mode Conditions", Composite Structures, vol. , no. 75, , 2006.

179

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, "Mixed-Mode Fatigue Crack Growth of Thin Aluminium Panels With Sigle-Side Repair Using Experimental and Numerical Methods", , vol. , no. 30, , 2006.

180

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, H. Daghyani, "Mixed - Mode Fracture Analysis of Aluminium Repaired Panels Using Composite Patches", , vol. , no. 66, , 2006.

181

H. Hosseini Toudeshky, M. Musivand Arzanfudi, "Parametric Meshless Galerkin Method", International Journal For Numerical Methods In Engineering, vol. , no. , , 2005.

182

H. Hosseini Toudeshky, G. Sadeghi, H. Daghyani, "Experimental Fatigue Crack Growth and Crack- Front Shape Analysis of Asymmetric Repaired Aluminium Panels With Glass/ Epoxy Composite Patches", Composite Structures, vol. , no. 71, , 2005.

183

H. Hosseini Toudeshky, H.R. Ovesy, M. Kharazi Sanat Shotorban, "The Development of an Approximate Method for The Design of Bead -Stiffened Composite Panels", , vol. , no. 43, , 2005.

184

H. Hosseini Toudeshky, J. Loughlan, M. Kharazi Sanat Shotorban, "The bucking characteristics of some integrally formed bead stiffened composite panels", , vol. , no. , , 2005.

185

H. Lexian, H. Daghyani, H. Hosseini Toudeshky, "Damage zone characterization of composite panels with a modified crack growth model", , vol. , no. , , 2004.

186

H. Daghyani, A.R. Sayadi, H. Hosseini Toudeshky, "Fatigue crack propagation of aluminium panels repaired with adhesively bonded composite laminates", , vol. , no. 217, , 2003.

187

H. Hosseini Toudeshky, "Effects of non _steady _state creep on creep behaviour of components", , vol. , no. 1, , 1998.

188

H. Hosseini Toudeshky, "Creep life assessments of defect-free components under uniform load and temperature", Computational Materials Science, vol. , no. 1, , 1995.

مقالات همایش‌ها

H. Hosseini Toudeshky, M. Tashayyoee, A. Navaei, J. Nafardastgerdi, S. Esmaeili Yengeje, "Investigations on experimental fatigue life and damage of designed hybrid composite laminates with negative and positive Poisson's ratio,", 9th Engineering Integrity Society International Conference on Durability & Fatigue, Jun 2024.

H. Hosseini Toudeshky, M. Jahanmardi, M. Goodarzi, "Experimental and numerical damage evolution of polyurethane material using a modified hyper-viscoelastic constitutive model,", 3rd AAAFM-UCLA International Conference on Advances in Functional Materials 2021, Aug 2021.

H. Hosseini Toudeshky, M. Saber, A. Navaei, "Interphase characterization of a single glass fiber and epoxy using a tensile test and digital image correlation method,", AAAFM-UCLA International Conference on Advances in Functional Materials-University of California Los Angeles, Aug 2021.

H. Hosseini Toudeshky, F. Sheibanian, Meisam Jalalvand, G. Afshar, "Progressive damage analysis of unidirectional pseudo-ductile hybrid composite laminates under tension loading,", The 6th International Conference on Composites,Characterization, Fabrication and Application, Dec 2018.

H. Hosseini Toudeshky, F. Sheibanian, Babak Fazlali, Bijan Mohammadi, "Progressive damage analysis of open holed cross-ply laminate under static loading,", The 6th International Conference on Composites,Characterization, Fabrication and Application, Dec 2018.

J. Nafardastgerdi, Jussi Virkajarvi, Heikki Remes, H. Hosseini Toudeshky, "Damage investigation of particulate reinforced composite from X-ray tomography in-situ fatigue test,", The 7th international conference on the fatigue of composites, Jul 2018.

R. Mohammadi, M. Saeedifar, M. Ahmadi Najafabadi, H. Hosseini Toudeshky, "Damage detection in multi-layer composites using acoustic emission technique,", ISME2017- 1864-ISME, May 2017.

M. Saeedifar, R. Mohammadi, M. Ahmadi Najafabadi, H. Hosseini Toudeshky, "Crack growth rate prediction in multi layer composites using acoustic emission,", ISME2017- 1864-ISME, May 2017.

F. Mazaheri Torei, H. Hosseini Toudeshky, "Experimental investigation on fracture toughness of sandwich beams with foam core and FML face sheets,", 11th International Conference on Composite Science and Technology, Apr 2017.

H. Hosseini Toudeshky, F. Sheibanian, S. Mohamadi, "Progressive interlaminar damage analysis using nonlocal models for composite laminates under tension loading,", 11th International Conference on Composite Science and Technology, Apr 2017.

M. Goodarzi, H. Hosseini Toudeshky, "Interface Element Including the Combination of Damage and Friction,", The 5th International Conference on Composites: Characterization, Fabrication and Application (CCFA-5), Dec 2016.

H. Hosseini Toudeshky, A. Samavati, A. Nikbakht, M. Salehi, "Effect of interface orientation on first mode delamination fracture toughness,", Thematic Conference on the mechanical response of composites - COMPOSITES 2015, Sep 2016.

H. Hosseini Toudeshky, A. Nikbakht, A. Samavati, Bijan Mohammadi, "Numerical investigation of the effect of matrix cracking dissipation energy on load-displacement response of glass-epoxy standard DCB speciemn,", Thematic Conference on the mechanical response of composites - COMPOSITES 2015, Sep 2016.

H. Hosseini Toudeshky, M. Goodarzi, Meisam Jalalvand, "Investigation into the size effect in the end-notched flexure (ENF) specimen for mode II energy release rate,", Thematic Conference on the mechanical response of composites - COMPOSITES 2015, Sep 2016.

M. Saeedifar, Mohamad Fotouhi, Navid Zarif Karimi, M. Ahmadi Najafabadi, H. Hosseini Toudeshky, Giangiacomo Minak, "Prediction of delamination growth in glass/epoxy composites using acoustic emission,", 2nd International Conference on Mechanics of Composites, Jul 2016.

S. Asghari Mooneghi, A. Gharehaghaji, H. Hosseini Toudeshky, Giti Torkaman, "Study on the effect of fatigue loading on the strenght of electrospun nanofibrous PA66 yarns,", The 10th national conference of textile engineering, Apr 2016.

M. Noghabi, I. Sattari Far, H. Hosseini Toudeshky, "Using the J-integral to estimate the fatigue life of aluminum structures,", The 15th International Conference of the Iranian Aerospace Society, Feb 2016.

H. Hosseini Toudeshky, B. Anbarlooie, Javad Kadkhodapour, "Microstructural failure mechanism of dual phase steel in high cycle fatigue and uniaxial tensile tests,", The Biennial International Conference on Experimental Solid Mechanics(X-Mech 2016), Feb 2016.

H. Hosseini Toudeshky, B. Anbarlooei, J. Kadkhodapour, "Microstructural Failure Mechanism of Dual Phase Steel in High Cycle Fatigue and Uniaxial Tensile Tests,", The International Conference on Experimental Solid Mechanics (XMECH 2016), Feb 2016.

R. Mohammadi, M. Saeedifar, M. Ahmadi Najafabadi, H. Hosseini Toudeshky, "determination of interlaminar fracture toughness of carbon/epoxy composites using acoustic emission,", 23rd Annual International Mechanical Engineers conference, May 2015.

M. Saeedifar, M. Ahmadi Najafabadi, H. Hosseini Toudeshky, R. Mohammadi, "Investigation of delamination in glass/epoxy composites using acoustic emission and visual inspection,", 23rd Annual International Mechanical Engineers conference, May 2015.

H. Hosseini Toudeshky, E. Mohamadi, Bijan Mohammadi, "Effects of fiber-matrix debonding matrix cracking on mechanical properties of composite laminates using micromechanical approach,", The 4th International Conference on Composites - Characterization, Fabrication and Application (CCFA-4, Dec 2014.

G. Sadeghi, H. Hosseini Toudeshky, "Multiscale matrix cracking and delamination damage analyses in quasi-isotropic glass/epoxy composite laminates with hole,", The 4th International Conference on Composites - Characterization, Fabrication and Application (CCFA-4, Dec 2014.

H. Hosseini Toudeshky, B. Roshanfar, M. Salehi, "Progressive delamination analysis of composite laminates under repeated out of plane impact loading,", The 4th International Conference on Composites - Characterization, Fabrication and Application (CCFA-4, Dec 2014.

M. Ahmadi Najafabadi, M. Sadighi, M. Salehi, H. Hosseini Toudeshky, "Debonding Identification of aluminum/composite interface in FMLs,", 4th International Conference on Acoustics and Vibration, Dec 2014.

G. Sadeghi, H. Hosseini Toudeshky, Bijan Mohammadi, "FE implementation of a micromechanic based damage model to analyze progressive matrix cracking in general symmetric laminates,", IV ECCOMAS Thematic Conference on the Mechanical Response of Composites - Composites 2013, Sep 2014.

F. Mazaheri Torei, H. Hosseini Toudeshky, "Low cycle fatigue delamination initiation and propagation in fiber metal laminates under in-plane loading,", IV ECCOMAS Thematic Conference on the Mechanical Response of Composites - Composites 2013, Sep 2014.

S. Hosseini, H. Hosseini Toudeshky, "Systems engineering approach for safety assessment of aircraft design,", The first conference on safety in air transportation, Jun 2014.

S. Asghari Mooneghi, A. Gharehaghaji, H. Hosseini Toudeshky, Giti Torkaman, "EXPERIMENTAL ANALYSIS OF FATIGUE PHENOMENON IN PA 66 NANOFIBER YARNS,", 14th AUTEX World Textile Conference, May 2014.

G. Sadeghi, H. Hosseini Toudeshky, M.a. Vaziri, "Numerical and experimental investigation on matrix cracking damage in composite plates with hole under tension loading,", 13th Iranian Aerospace Association Conference, Mar 2014.

H. Hosseini Toudeshky, M. Jannesari, "Creep life estimation of plates under creep behavior using continuum damage theory,", 13th Iranian Aerospace Association Conference, Mar 2014.

B. Anbarlooie, H. Hosseini Toudeshky, Javad Kadkhodapour, G. Shadalooyi, "Deformation of martensite islands and pattern of voids formation in dual phase steel with 2D and 3D stress distribution based on micromechanical experimental observation,", The Bi-Annual International Conference on ExperimentalSolid Mechanics and Dynamics (X-Mech-2014 ), Feb 2014.

G. Sadeghi, H. Hosseini Toudeshky, Bijan Mohammadi, "Experimental damage evolution and failure mechanisms in GFRP composite laminates with open hole,", The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics (X-Mech 2014, Feb 2014.

B. Anbarlooei, H. Hosseini Toudeshky, Javad Kadkhodapour, G. Shadalooyi, "Deformation of martensite islands and pattern of voids formation in dual phase steel with 2D and 3D stress distribution based on micromechanical experimental observation,", The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics (X-Mech 2014, Feb 2014.

Ali Pourkamali, Javad Kadkhodapour, G. Shadalooyi, H. Hosseini Toudeshky, B. Anbarlooie, "Experimental and numerical investigation of failure in a commercial dual phase steel and the effect of microstructure on that,", The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2014, Feb 2014.

M.Z. Kabir, A. Nazari, H. Hosseini Toudeshky, "Damage Progression Characterization of GFRP composite Plates by 3D FE Modeling in Various Loading Conditions,", The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics, Feb 2014.

A. Fallahi Arezodar, H. Hosseini Toudeshky, S. Ghalehbandi, "Effect of heat treatment on mechanical properties of ECAPed 7075 aluminum alloy,", The 4th International Conference on Ultrafine Grained and Nano-Structured Materials, Nov 2013.

H. Hosseini Toudeshky, G. Sadeghi, B. Mohammadi, "Analysis of progressive matrix cracking in cross ply laminates with geometry discontinuity under in-plane loading condition,", The 3rd International conference on composites: Characterization, Fabrication and Application - CCFA-3, Dec 2012.

H. Hosseini Toudeshky, M. Ghayour, M. Jalalvand, "A Simplified multiscale method for matrix cracking analysis in cross ply laminates,", The 3rd International conference on composites: Characterization, Fabrication and Application - CCFA-3, Dec 2012.

H. Hosseini Toudeshky, A. Farrokhabadi, B. Mohammadi, "A Micromechanical model for the analysis of matrix cracking in composite laminates under tri-axial loading and out of plane bending,", The 3rd International conference on composites: Characterization, Fabrication and Application - CCFA-3, Dec 2012.

H. Hosseini Toudeshky, M.A. Ghaffari Gharehbagh, B. Mohammadi, "Repair of curved stiffened aluminum panels under combined tension and shear cyclic loadings,", Conference on aerospace technology of the XXI century, AEROTECH IV-2012, Nov 2012.

H. Hosseini Toudeshky, M. Goodarzi, B. Mohammadi, "Multiple Delaminations growth in composite laminates under compressive cyclic loading in post-buckling,", Conference on aerospace technology of the XXI century, AEROTECH IV-2012, Nov 2012.

H. Hosseini Toudeshky, A. Vojdani, M. Sadighi, "Numerical investigation of thermal residual stresses effects on fatigue crack growth of repaired panels bonded with FMLs,", Advances in structural health management and composite structures 2012 (ASHMCS 2012), Aug 2012.

H. Hosseini Toudeshky, A. Nazari, M.Z. Kabir, "Repair of Delaminated Composite Beams using FRP Jacket under Fatigue Loading Conditions,", 9th International Congress on Civil Engineering, May 2012.

A. Vojdani, M. Sadighi, H. Hosseini Toudeshky, "Experimental investigation on thermal residual stresses effects on fatigue crack growth of repaired panels bonded with FMLs,", The International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2012), Mar 2012.

H. Hosseini Toudeshky, M.A. Ghaffari Gharehbagh, "A simple method to estimate the fatigue crack growth life of repaired pipes with composite patches,", International Conference on Mechanical Engineering and Materials, ICMEM 2012, Jan 2012.

H. Hosseini Toudeshky, E. Fadaei, "Effects if composite patch geometry on collapse load of pressurized steel pipes with internal longitudinal flaws,", International Conference on Mechanical Engineering and Materials, ICMEM 2012, Jan 2012.

H. Hosseini Toudeshky, M.A. Ghaffari Gharehbagh, Bijan Mohammadi, "Fatigue propagation of induced cracks by stiffeners in repaired panels with composite patches,", International Congress on Mechanical Behavior of Materials, ICM-11, Jun 2011.

H. Hosseini Toudeshky, A. Farrokhabadi, Bijan Mohammadi, "Analysis of damage events in quasi-isotropic laminates using a generalized micromechanics approach,", International Congress on Mechanical Behavior of Materials, ICM-11, Jun 2011.

H. Hosseini Toudeshky, A. Jasem Zadeh, Bijan Mohammadi, "Fatigue Debonding progress between composite patch and cracked aluminum panel using interface element,", 16th International Conference on Composite Structures, ICCS-16, Jun 2011.

H. Hosseini Toudeshky, M.A. Ghaffari Gharehbagh, "Corrosion fatigue crack propagation analysis of repaired pipes with composite patch under cyclic pressure,", 16th International Conference on Composite Structures, ICCS-16, Jun 2011.

M. Jalalvand, H. Hosseini Toudeshky, Bijan Mohammadi, "A new nonlocal cohesive constitutive law for modeling of delamination induced by matrix cracking,", Deformation and Fracture of Composites, DFC-11, Apr 2011.

H. Hosseini Toudeshky, H.A. Rashtiyani, Bijan Mohammadi, "An innovative FEM based micromechanical approach for the analysis of matrix cracking and local delamination in general symetric laminates,", Deformation and Fracture of Composites, DFC-11, Apr 2011.

H. Hosseini Toudeshky, M. Goodarzi, Bijan Mohammadi, "Prediction of mixed-mode delamination growth in composite laminates using contact interface elements,", Deformation and Fracture of Composites, DFC-11, Apr 2011.

H. Hosseini Toudeshky, M. Jalalvand, M. Ghayour, "Numerical aspects of delamination modeling using interface elements,", Eighth International Conference on Composite Science and Technolog, ICCST8, Mar 2011.

H. Hosseini Toudeshky, A. Jasem Zadeh, Bijan Mohammadi, "Fatigue Delamination analysis of composite laminates with a central hole using interface element,", Eighth International Conference on Composite Science and Technolog, ICCST8, Mar 2011.

H. Hosseini Toudeshky, A. Farrokhabadi, Bijan Mohammadi, "Progressive damage analyses of composite laminates exhibiting free edge effects using a new micro-meso approach,", Eighth International Conference on Composite Science and Technolog, ICCST8, Mar 2011.

H. Hosseini Toudeshky, Bijan Mohammadi, H.A. Rashtiyani, "Matrix Crack and Delamination Analyses in Composite Laminates by FEM Based Micromechanical Approach,", The 2nd International Conference on Compositees: Characterization, Fabrication and Application-CCFA2, Dec 2010.

A. Kabiri Ataabadi, H. Hosseini Toudeshky, S. Zeiaei Rad, "Experimental Effects of Various Parameters on Kink-Band Formation of Glass/Epoxy Laminates,", The 2nd International Conference on Compositees: Characterization, Fabrication and Application-CCFA2, Dec 2010.

H. Hosseini Toudeshky, Bijan Mohammadi, A. Jasem Zadeh, "Application of Solid-like Interface Element in Delamination Growth Analysis under Cyclic Loading,", The 2nd International Conference on Compositees: Characterization, Fabrication and Application-CCFA2, Dec 2010.

H. Hosseini Toudeshky, F. Mazaheri Torei, Bijan Mohammadi, "Progressive Damage Analysis of Laminated Composites using Element Free Galerkin Method,", 3th International Conference on Multi-Functional Materials and Structures, Sep 2010.

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, "Coupling of Continuum Damage Mechanics with De-cohesive Element for Delamination Analysis in Laminated Composites,", 3th International Conference on Multi-Functional Materials and Structures, Sep 2010.

H. Hosseini Toudeshky, M. Karimi, Bijan Mohammadi, "Acoustic Fatigue Crack Growth Prediction in Coupled Air Structures,", 9th International Conference on Fracture and Damage Mechanics - FDM10, Sep 2010.

H. Hosseini Toudeshky, A. Farrokhabadi, Bijan Mohammadi, "A New Micro-Meso Approach to Investigate Matrix Cracking Induced Delamination in Laminated Composites,", The 12th International Congress on Mesomechanics - Mesomechanics 2010, Jun 2010.

Bijan Mohammadi, H. Hosseini Toudeshky, "Prediction of Damage Propagation in Laminated Composites using Coupled Countinuum Damage Interface Element Concept,", The 12th International Congress on Mesomechanics - Mesomechanics 2010, Jun 2010.

H. Hosseini Toudeshky, M. Karimi, "Vibration Analysis of Coupled Fluid-Filled and Immersed Thin Composite Cylinders,", 18th Annual International Conference on Mechanical Engineering - ISME2010, May 2010.

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Multi Surface Continuum Damage-Plasticity Analysis of Laminates Including Unilateral Effects,", 4th European Conference on Computational Mechanics - ECCM 2010, May 2010.

H. Hosseini Toudeshky, A. Farrokhabadi, B. Mohammadi Sangjouey, "Transverse crack density evolution in a single orthotropic lamina under multi axial stresses using analytical method,", Jul 2009.

H. Hosseini Toudeshky, A. Sohrabi Mollayousef, B. Mohammadi Sangjouey, "Delamination analysis of holed composite laminates using interface elements,", Jul 2009.

H. Hosseini Toudeshky, S. Hoseini, B. Mohammadi Sangjouey, "Progressive delamination alaysis using discontinuous layered elements,", Jun 2009.

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, "Failure analysis of stiffened laminates using continuum damage mechanics with de cohesive layer,", Jun 2009.

H. Hosseini Toudeshky, R. Fatahi, B. Mohammadi Sangjouey, "Progressive damage analysis of composite scarfrepair,", Jun 2009.

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Progressive damage analyses of laminated composites exhibiting free edge effects using coupled contimuum kamage plastivity,", Apr 2009.

H. Hosseini Toudeshky, S. Hosseini, B. Mohammadi Sangjouey, "Prdiction of delamination initiation and progagation of laminated plates under buckling using de conhesive law and layer wise finite element method,", Apr 2009.

H. Hosseini Toudeshky, M. Shambooli, B. Mohammadi Sangjouey, "Effects of curing temperature on fatigue crack growth of repaired panels using various composite materials,", Jan 2009.

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Damage analysis of laminated composites using contimuum damage mechanics incorporated with a semi analytical layer wise theory,", Jan 2009.

H. Hosseini Toudeshky, S. Hosseini, B. Mohammadi Sangjouey, "Progrssive delamination buckling analysis using interface elementincorporated with full layer wise plate theory,", Dec 2008.

H. Hosseini Toudeshky, R. Fatahi, B. Mohammadi Sangjouey, "Rapair of composite laminates using scarf patch,", Dec 2008.

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Prediction of inelastic behavior of quasi isotropic laminates using coupled continuum damage plasiticity,", Dec 2008.

H. Hosseini Toudeshky, M. Shambooli, B. Mohammadi, "1. Experimental investigations on the effects fo thermal residual stresses on the efficiency of repairedpanels with glass epoxy composite patch,", Sep 2008.

B. Mohammadi, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Damage evolution of laminated composites using continuum damage mechanics incorporate with interface element,", Sep 2008.

H. Hosseini Toudeshky, A. Sohrabi Mollayousef, B. Mohammadi, "Delamination of laminates governed by free edge interlaminar stresses using interface element,", Sep 2008.

H. Hosseini Toudeshky, A. Sohrabi Mollayousef, B. Mohammadi Sangjouey, "Delamination of laminates governed by free edge interlaminar stresses using interface element,", Sep 2008.

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Damage evolution of laminated composites using continuum damage mechanics incorporated with interface elemnt,", Sep 2008.

H. Hosseini Toudeshky, M. Shambooli, B. Mohammadi Sangjouey, "Experimental investigations on the effects of thermal residual stresses on the efficiency of repaired panels with warious composite materials,", Sep 2008.

H. Hosseini Toudeshky, A. Sohrabi Mollayousef, "Delamination of laminates coverned by free edge interlaminar stresses using interface element,", Sep 2008.

H. Hosseini Toudeshky, M. Shambooli, "Experimental investigations on the effects of thermal residual stresses on the efficiency of repaired panels with glass/ epoxy composite patch,", Sep 2008.

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Predication of inelastic behavior of composite laminates using multi surface contimuum damage plasticity,", Jul 2008.

H. Hosseini Toudeshky, M. Saber, B. Mohammadi Sangjouey, "Real 3D crack front and crack trajectroy analyses of single side repaired thickaluminium panels,", Jul 2008.

H. Hosseini Toudeshky, A. Sohrabi Mollayousef, B. Mohammadi Sangjouey, "Effect of various constitutive laws of interface elenent on delamination initiation and propagation of laminates,", May 2008.

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Effect of free edge interlaminar stresses on the damage evolution of laminated composites using continuum damage mechanics,", May 2008.

H. Hosseini Toudeshky, A. Sohrabi Mollayousef, "Delamination analysis using interface elements with various de cohesive properties,", Feb 2008.

H. Hosseini Toudeshky, B. Mohammadi, M.H. Sadr Lahidjani, "Damage analysis of laminated plates using continuum damage mechanics,", Feb 2008.

H. Hosseini Toudeshky, M. Saber, B. Mohammadi Sangjouey, "General mixed mode fatigue crack growth of adhesively bonded single side repaired panels using finite element method,", Nov 2007.

H. Hosseini Toudeshky, A. Farrokhabadi, B. Mohammadi Sangjouey, "Stiffness reduction failure load and predictions using micromechanical approach for cross ply laminates,", Nov 2007.

M. Musivand Arzanfudi, H. Hosseini Toudeshky, "Crack near- tip stress field analyses using parametric meshless galerkin method (PMCM),", May 2007.

H. Hosseini Toudeshky, M. Saber, B. Mohammadi Sangjouey, "Fatigue crack growth rate of adhesively repaired thin aluminium panels in general miced- mode condition,", May 2007.

H. Hosseini Toudeshky, M.R. Mofakhami, "Effective Parameters on Sound Transmission of Party Walls Using Finite Element Method,", Jan 2007.

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, M.H. Sadr Lahidjani, "free edge effects stress analysis of laminates using layer-wise finite element method,", sixth international conference on composite science and technology, Jan 2007.

100

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, "Effects of coposite pathches on the dynamic and buckling response of repaired aluminum panels,", Jan 2007.

101

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, "Free edge effects stress analysis of laminates using layer - wise finite element method,", Jan 2007.

102

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, "Fatigue crack growth of repaired thick aluminum panels,", Jan 2007.

103

H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Free edge effects stress analysis of laminates using layer wise finite element method,", Jan 2007.

104

H. Hosseini Toudeshky, M. Musivand Arzanfudi, "Improvements in the parametric meshless Galerkin,", Sep 2006.

105

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, "The effects of thermal residual stresses on the fatigue life of aluminum panels repaired with various bonded composite materials,", Sep 2006.

106

H. Hosseini Toudeshky, H.R. Ovesy, "Finite element based prediction of failure in laminated composite plates,", Jul 2006.

107

H. Hosseini Toudeshky, "Finite element based prediction of failure in laminated composite plate,", Jul 2006.

108

H. Hosseini Toudeshky, M. Saber, B. Mohammadi Sangjouey, "analysis of repaired aluminum panels in general mixed - modle conditions,", Jul 2006.

109

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, "Fatigue Crack trajectory analysis of single-side repaired thin aluminum panels with various composit patch lay-up configurations,", Jun 2006.

110

H.R. Ovesy, H. Hosseini Toudeshky, M. Kharazi Sanat Shotorban, "Buckling analysis of laminates with multiple through-the-width delaminations by using spring simulated model,", Jun 2006.

111

H. Hosseini Toudeshky, B. Mohammadi, , H. Daghyani, "Experimental fatigue crack growth analysis of aluminum panels repaired with single - sided composite material .,", Feb 2006.

112

H. Hosseini Toudeshky, G. Sadeghi, H. Daghyani, "Experimental fatigue crack growth analysis of aluminum,", Feb 2006.

113

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, B. Hamidi Ghaleh Jigh, H.R. Ovesy, "Analysis of composite skin/stiffener debounding and failure under uniaxial loading,", Nov 2005.

114

H. Hosseini Toudeshky, , B. Mohammadi Sangjouey, H. Daghyani, "Experimental investigations on fatigue crack growth of repaired thick aluminum panels in mixed-mode conditions,", Nov 2005.

115

H. Hosseini Toudeshky, , B. Mohammadi Sangjouey, "Mixed-mode experimental fatigue crack growth analyses of thin aluminum panels repaired with composite patches,", Apr 2005.

116

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, G. Sadeghi, "Numerical and experimental fatigue crack growth analysis n mode-I for repaired aluminum panels using composite material,", Apr 2005.

117

H. Hosseini Toudeshky, M. Meftahi, R. Yarmohammadi, "A Parametric study on sound transmission between two adjacent rooms using Finite elements method,", Feb 2005.

118

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, H. Daghyani, "Analysis of mixed mode cracked panels repaired with single sided composite patch,", Jun 2004.

119

H. Hosseini Toudeshky, J. Laflan, M. Kharazi Sanat Shotorban, "An experimental and numerical study on bead stiffened composit panels,", Jun 2004.

120

H. Hosseini Toudeshky, G. Sadeghi, H. Daghyani, "A three dimensional Approach of fatigue crack propagation for aluminum panels repaired with single- sided composite laminates,", Jun 2004.

121

H. Hosseini Toudeshky, H.R. Ovesy, M. Kharazi Sanat Shotorban, "A Comprehensive study on design of composite Panels stiffened by Beads,", Jun 2003.

122

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, H. Daghyani, "Mixed-mode fracture analysis of repaired aluminum panels using composite patches,", Jun 2003.

123

H. Hosseini Toudeshky, B. Mohammadi, H. Daghyani, "Mixed-mode crack propagation based on various propagation angle criteria,", May 2003.

124

H. Hosseini Toudeshky, H.R. Ovesy, M. Kharazi Sanat Shotorban, "A simple Method to Estimate Buckling Loads of Bead stiffened Composite panels,", Jan 2003.

125

H. Hosseini Toudeshky, B. Mohammadi Sangjouey, H. Daghyani, "Effects of patch lay_up configuration on fracture Parameters and Fatigue Life of Single_Sided Repaired Panels in Mixed_Mode Conditions,", Jan 2003.

126

H. Daghyani, , H. Hosseini Toudeshky, "Evaluation of deformation energy of woven fabric composits in forming process,", Jul 2002.

127

H. Daghyani, A.R. Sayadi, H. Hosseini Toudeshky, "Fatingue crack Propagation of Alumminum Panels Repaired with Adhesively Bonded Composite Laminates,", Jun 2002.

128

H. Hosseini Toudeshky, H.R. Ovesy, M. Kharazi Sanat Shotorban, "Buckling Behaviour of stiffened composite panels containing vertical Beads,", May 2002.

129

H. Hosseini Toudeshky, H. Daghyani, M.R. Mofakhami, "Load interaction effects on fatigue crack growth,", Feb 2002.

130

H. Hosseini Toudeshky, M. Sadeghi, "on new non-buckling composite structures,", Feb 2002.

131

H. Hosseini Toudeshky, H. Daghyani, M. Sadeghi, "Effects of vertical and Round Beads on Buckling Behaviour of composite structures,", Feb 2002.

132

H. Daghyani, H. Hosseini Toudeshky, S. Sahabi, "fracture analysis of repaired panelswith adherively bonded composite plates .,", Aug 2000.

133

H. Hosseini Toudeshky, H. Daghyani, H. Shahverdi, "Fatigue Life Assessment of Repaired Panels with Adhesively Bonded Composite Plates,", Aug 2000.

134

H. Hosseini Toudeshky, "An investigation on new nonbuckling composite structures,", Jan 2000.

135

, H. Hosseini Toudeshky, "Can Primary Creep be Significant in Life assessment,", Dec 1999.

136

H. Daghyani, H. Hosseini Toudeshky, S. Sahabi, "Fracture Behaviour of Repaired Panels,", Aug 1999.

137

H. Hosseini Toudeshky, Khosro Zarabi, "Effects Of non-teady state creep on creep Behavior of Components,", May 1998.

138

, H. Hosseini Toudeshky, "an irnovative robust method for creep life assessment of components containing stress concentrations under primary plus secondary plus tertiary creep,", Aug 1997.

139

H. Hosseini Toudeshky, "A simple method for life assessment of components under primary plus secondary creep conditions,", Feb 1996.

دروس ارائه شده

عنوان درس

توصیف درس

سرفصل ها

دوره درسی

Strength of Materials

دانشجو پس از پایان درس قادر خواهد بود: 1- تنش و کرنش را در قطعات مهندسی محاسبه نماید. 2- تیرها، شفتها و ستونها را از نظر انواع نیرو و تنش تحلیل

4051

Creep, Fatigue & Fracture Mechanics

4042

Machine Design (I)

آشنایی با مفاهیم و اصول طراحی در صنعتآشنایی با انتخاب مواد برای کاربردهای مختلف و مبانی احتمال و آمار در خصوصیات مکانیکی و تحلیل تنشیادآو

4042

Strength of Materials

4041

Continuum Mechanics (I)

4041

Creep, Fatigue & Fracture Mechanics

4032

Strength of Materials

4032