1
P. Babazadeh, L. Nasr Azadani,
"Thermo-hydraulic performance of wavy channel configurations in flat plate solar air heaters",
Engineering Applications of Computational Fluid Mechanics,
vol. 20,
no. 1,
pp.1-17,
2026.
2
M. Naderi, L. Nasr Azadani, A. Kargari,
"Investigation of the effect of emerging feed spacer geometry on the membrane distillation process: CFD modeling and optimization",
Separation and Purification Technology,
vol. 382,
no. 5,
pp.1-15,
2026.
3
H. Ghasemi, L. Nasr Azadani,
"Impact of angle of attack and relative width of V-shaped ribs on the thermo-hydraulic performance of a solar air heater",
Aut Journal of Mechanical Engineering,
vol. 10,
no. 2,
pp.199-210,
2026.
4
F. Mahdizadeh Ghohe, L. Nasr Azadani,
"Applying the scale-dependent dynamic Smagorinsky model in large eddy simulation of the turbulent non-Newtonian Burgers' equation",
Physica D-Nonlinear Phenomena,
vol. 485,
no. ,
pp.1-6,
2026.
5
S. Ghasemi Nureini, L. Nasr Azadani,
"Thermal performance enhancement of a solar air heater with different roughness layouts",
Case Studies In Thermal Engineering,
vol. 74,
no. 1,
pp.1-13,
2025.
6
M. Kazemi, L. Nasr Azadani,
"Effect of Channel Cross-Section Geometry on the Thermo-Hydraulic Characteristics of Non-Newtonian Fluids",
Heat Transfer Engineering,
vol. ,
no. ,
pp.1-12,
2025.
7
S. Jafari Tadi, L. Nasr Azadani,
"Application of the Large Eddy Simulation Method in Numerical Study of Turbulent Flows in Stirred Tanks",
Iranian Journal of Chemical Engineering,
vol. 24,
no. 139,
pp.148-160,
2025.
8
N. Salarpour, L. Nasr Azadani,
"Optimization and evaluation of thermo-hydraulic performance of solar air heaters equipped with different roughness geometries",
Case Studies In Thermal Engineering,
vol. 61,
no. 105037,
pp.1-14,
2024.
9
F. Mahdizadeh Ghohe, L. Nasr Azadani,
"Historical evolution of eddy viscosity models in large eddy simulation of turbulent flows",
Iranian Journal of Mechanical Engineering,
vol. 150,
no. 32,
pp.31-44,
2023.
10
L. Nasr Azadani,
"Vertical axis wind turbines in cluster configurations",
Ocean Engineering,
vol. 272,
no. 113855,
pp.1-13,
2023.
11
L. Nasr Azadani, S.M. Saleh,
"Effect of blade aspect ratio on the performance of a pair of vertical axis wind turbines",
Ocean Engineering,
vol. 265,
no. 112627,
pp.1-11,
2022.
12
T. Yazdanimotlagh, L. Nasr Azadani,
"Effect of Triangular Injection Rate Shape on the Performance of a Reactivity Controlled Compression Ignition Engine",
,
vol. 21,
no. 122,
pp.24-34,
2022.
13
T. Yazdanimotlagh, L. Nasr Azadani,
"Effect of the ramp injection rate shape on the performance and emissions of a natural gas/diesel dual fuel engine",
International Journal of Engine Research,
vol. 0,
no. 0,
pp.1-12,
2021.
14
A.M. Fardazad, L. Nasr Azadani,
"Multi objective optimization of the baffle parameters for a tubular membrane",
Journal of The Taiwan Institute of Chemical Engineers,
vol. 0,
no. 0,
pp.1-9,
2021.
15
L. Nasr Azadani, N. Gharouni,
"Multi objective optimization of cylindrical shape roughness parameters in a solar air heater",
Renewable Energy,
vol. 179,
no. 0,
pp.1156-1168,
2021.
16
M. Hassanpour, L. Nasr Azadani,
"Aerodynamic optimization of the configuration of a pair of vertical axis wind turbines",
Energy Conversion and Management,
vol. 238,
no. 114069,
pp.1-11,
2021.
17
T. Yazdanimotlagh, L. Nasr Azadani, K. Yazdani Motlagh,
"Multi-objective optimization of diesel injection parameters in a natural gas/diesel reactivity controlled compression ignition engine",
Applied Energy,
vol. 279,
no. 115746,
pp.1-15,
2020.
18
K. Qasemi, L. Nasr Azadani,
"Optimization of the power output of a vertical axis wind turbine augmented with a flat plate deflector",
Energy,
vol. 202,
no. 0,
pp.1-10,
2020.