1
F. Ghasemkhah, M. Latifi, A. Hadjizadeh, M.A. Shokrgozar, F. Radmanesh, H. Sadeghi Abandansari, M. Hesaraki, S. Azari,
"Core-shell fibrous threads loaded with VEGF plasmid polyplexes for sustained, threshold-guided gene delivery",
Biomedical Materials,
vol. 21,
no. 045014,
pp.1-19,
2026.
2
N. Khomarloo, Elham Mohsenzadeh, R. Bagherzadeh, M. Latifi, Marc Debliquy, Ahmadou Ly, Driss Lahem, Hayriye Gidik,
"Fabrication of Gas Sensors for Detecting NO and NO2 by Synthesizing rGO/ZnO Nanofibers",
Journal of The Textile Institute,
vol. 0,
no. 0,
pp.1-12,
2025.
3
S. Mohammad Pour Fazeli, M. Latifi, R. Bagherzadeh,
"Improving the piezoelectric performance of multilayered nanogenerators based on composite polyvinylidene fluoride/poly(3,4-ethylenedioxythiophene)-polystyrene sulfonate nanofiber structure",
Journal of The Textile Institute,
vol. 1,
no. 1,
pp.1-11,
2025.
4
N. Khomarloo, Hayriye Gidik, R. Bagherzadeh, M. Latifi, Marc Debliquy, Ahmadou Ly, Driss Lahem, Elham Mohsenzadeh,
"Enhancing Nitric Oxide Gas Detection by Tuning the Structural Dimension of Electrospun ZnO Nanofibers Fibers and Polymers",
Fibers and Polymers,
vol. ,
no. 0,
pp.1-13,
2024.
5
N. Khomarloo, R. Bagherzadeh, Hayriye Gidik, Elham Mohsenzadeh, M. Latifi, Marc Debliquy, Ahmadou Ly, Driss Lahem,
"Transformation of zinc acetate into ZnO nanofibers for enhanced NOx gas sensing: Cost-effective strategies and additive-free optimization",
Journal of Industrial Textiles,
vol. 54,
no. 0,
pp.1-27,
2024.
6
F. Zare Bidoki, N. Ezazshahabi, F. Mousazadegan, M. Latifi,
"Evaluating gloved hand performance based on the mechanical properties of the applied material",
International Journal of Occupational Safety and Ergonomics,
vol. 1,
no. 1,
pp.1-13,
2024.
7
Shiva Norouzi, Nikoo Saveh Shemshaki, Ehsan Norouzi, M. Latifi, Bahareh Azimi, Serena Danti, Xiaolan Qiao, Yuee Miao, Shengyuan Yang, Mohsen Gorji, Vasilije Petrovic, Mohammad Ali Aboudzadeh, R. Bagherzadeh,
"Recent advances in biomaterials for tissue-engineered constructs: Essential factors and engineering techniques",
Materials Today Chemistry,
vol. 37,
no. 102016,
pp.1-16,
2024.
8
B. Najafloo, Amir Masoud Rezadoust, M. Latifi,
"Z-printing of continuous fiber-reinforced thermoset composites: The process development, and mechanical properties evaluation",
Journal of Reinforced Plastics and Composites,
vol. ,
no. 0,
pp.1-12,
2024.
9
N. Khomarloo, Elham Mohsenzadeh, Hayriye Gidik, R. Bagherzadeh, M. Latifi,
"Overall perspective of electrospun semiconductor metal oxides as high-performance gas sensor materials for NOx detection",
Rsc Advances,
vol. 14,
no. 11,
pp.7806-7824,
2024.
10
Bahareh Azimi, A. Rasti, Alessandra Fusco, Teresa Macchi, Claudio Ricci, Mohammad Hosseinifard, Lorenzo Guazzelli, Giovanna Donnarumma, R. Bagherzadeh, M. Latifi, Ipsita Roy, Serena Danti, Andrea Lazzeri,
"Bacterial cellulose electrospun fiber mesh coated with chitin nanofibrils for eardrum repair",
Tissue Engineering Part A,
vol. ,
no. 0,
,
2024.
11
Ali Safavi, Mohsen Gorji, R. Bagherzadeh, S. Mazinani, M. Latifi,
"A mathematical model for dynamic thermal behavior of multilayer clothing system incorporated with microencapsulated phase change materials",
Fibers and Polymers,
vol. 24,
no. 0,
pp.4049-4060,
2023.
12
B. Najafloo, A. M. Rezadoust, M. Latifi,
"Investigation on process window of 3D printed continuous glass fiber-reinforced thermosetting composites",
Polymer Composites,
vol. ,
no. 0,
,
2023.
13
Seyedeh Nooshin Banitaba, D. Semnani, Elahe Heydari-soureshjani, Waqas Ul Arifeen, Tae Jo Ko, Behzad Rezaei, Ali A. Ensaf, M. Latifi, Ebrahim Mostafavi, Ajeet Kumar Kaushik,
"Nanocomposite with Fast Li+ Ion Conductivity: A Solvent-Free Polymer Electrolyte Reinforced with Decorated Fe3O4 Nanoparticles",
Acs Applied Energy Materials,
vol. 6,
no. 9,
pp.4704-4714,
2023.
14
Koorosh Delavari, , R. Bagherzadeh, M. Latifi,
"Effect of Micro-Balloon Volume Fraction on the Tensile Behavior of Epoxy Syntactic Foams Reinforced with Glass Micro-Balloons",
Composites: Mechanics, Computations, Applications,
vol. 14,
no. 1,
pp.29-40,
2023.
15
S. Aghazadeh, A. Asayesh, M. Latifi,
"Effect of weft yarn laying on tensile properties of weft-inserted knitted fabrics",
Indian Journal of Fibre and Textile Research,
vol. 47,
no. 4,
pp.403-409,
2022.
16
Seyedeh Nooshin Banitaba, D. Semnani, Elahe Heydari-soureshjani, Waqas Ul Arifeen, Tae Jo Ko, Behzad Rezaei, Ali A Ensaf, M. Latifi, Ebrahim Mostafavi, Ajeet Kaushik,
"Fabrication and performance evaluation of CuO, NiO, and Co3O4 embedded electrospun electrolytes: Suitable for lithium polymer solvent-free batteries",
Journal of Alloys and Compounds,
vol. 924,
no. 166482,
pp.1-12,
2022.
17
Fatemeh Zamani, M. Amani Tehran, M. Latifi,
"Estimation and Optimization of Physical Properties of Electrospun PLGA Nanofbrous Mat",
Iranian Journal of Polymer Science and Technology (Ijpst),
vol. 35,
no. 2,
pp.127-139,
2022.
18
A. Forouzan Najafabadi, M. Yousefzadeh, M. Latifi, Kui Yao,
"Electrical Connection Configurations for Polyvinylidene Fluoride Nanofabrics with Enhanced Piezoelectric Response",
Ieee Sensors Journal,
vol. 22,
no. 15,
pp.1-8,
2022.
19
M.A. Rahiminia, M. Latifi, M. Sadighi,
"Analysis of longitudinal and innovative transversal 3D printed lattice tubular braid textures subjected to internal compression as reinforcement",
Journal of Industrial Textiles,
vol. 51,
no. 1,
pp.856-879,
2022.
20
F. Zare Bidoki, N. Ezazshahabi, F. Mousazadegan, M. Latifi,
"Objective and subjective evaluation of various aspects of hand performance considering protective glove's constructional parameters",
Journal of Industrial Textiles,
vol. 0,
no. 0,
pp.1-30,
2022.
21
R. Yahyapour, Mohammad Sajad Sorayani Bafqi, M. Latifi, R. Bagherzadeh,
"Hybrid multilayered piezoelectric energy harvesters with non-piezoelectric layers",
Journal of Materials Science-Materials In Electronics,
vol. 33,
no. 1,
pp.1783-1797,
2022.
22
F. Zarebidoki, N. Ezazshahabi, F. Mousazadegan, M. Latifi,
"An Overview of Protective Gloves with Regards to Hand Performance and the Evaluation Methods",
Journal of Textiles and Polymers,
vol. 9,
no. 3,
pp.1-18,
2021.
23
M.S. Sorayani Bafqi, A.H. Sadeghi, M. Latifi, R. Bagherzadeh,
"Design and Fabrication of a Piezoelectric Out-put Evaluation System for Sensitivity Measurements of fibrous Sensors and Actuators",
Journal of Industrial Textiles,
vol. 50,
no. 10,
pp.1643-1659,
2021.
24
A.H. Sadeghi, M. Latifi, R. Bagherzadeh,
"Design and fabrication of a piezoelectric out-put evaluation system for sensitivity measurements of fibrous sensors and actuators",
Journal of Industrial Textiles,
vol. 50,
no. 10,
pp.1643-1659,
2021.
25
G. Sargolzaie, F. Mousazadegan, N. Ezazshahabi, M. Latifi,
"Investigation of Microclimate Ventilation of Simulated Garment in Terms of Wind Speed and Air Gap Thickness",
Fibers and Polymers,
vol. 0,
no. 0,
pp.1-7,
2021.
26
S. Ghasemi Nezhad, M. Latifi, R. Bagherzadeh,
"Hybrid Pizo-Triboelectric Energy Nanogenerator from Woollen fabric and PVDF/BaTiO3 Nanofibrous Layer",
Advanced Materials Materials and Novel Coatings,
vol. 9,
no. 34,
pp.2474-2481,
2020.
27
N. Moazeni, S. Mehdi, A. Merati, M. Latifi, Shohre Rouhani,
"Effect of stimuli-responsive polydiacetylene on the crystallization and mechanical properties of PVDF nanofbers",
Polymer Bulletin,
vol. 77,
no. 0,
pp.5373-5388,
2020.
28
F. Mokhtari, M. Shamshirsaz, M. Latifi, Javad Foroughi,
"Nanofibers-Based Piezoelectric Energy Harvester for Self-Powered Wearable Technologies",
Polymers,
vol. 12,
no. 2697,
pp.1-15,
2020.
29
A. Forouzan Najafabadi, M. Yousefzadeh, M. Latifi, Jose Rajan,
"Effect of Geometrical Parameters on Piezo-Response of Nanofibrous Wearable Piezoelectric Nanofabrics under Low Impact Pressure",
Macromolecular Materials and Engineering,
vol. ,
no. 0,
pp.1-22,
2020.
30
F. Mohammadkhani, M. Montazer, M. Latifi,
"Photo and Bio Activities of Magnetic Electrospun Recycled Polyester Mat",
Journal of Polymers and The Environment,
vol. ,
no. 28,
pp.3235-3243,
2020.
31
M. Halvaei, Masoud Jamshidi, M. Latifi, Mojtaba Ejtemaei,
"Experimental investigation and modelling of flexural properties of carbon textile reinforced concrete",
Construction and Building Materials,
vol. 262,
no. 120877,
pp.1-12,
2020.
32
Bahareh Azimi, M.S. Sorayani Bafqi, Alessandra Fusco, Claudio Ricci, Giuseppe Gallone, R. Bagherzadeh, Giovanna Donnarumma, Mohammed Jasim Uddin, M. Latifi, Andrea Lazzeri, Serena Danti,
"Electrospun ZnO/poly (vinylidene fluoride-trifluoroethylene) scaffolds for lung tissue engineering",
Tissue Engineering Part A,
vol. 26,
no. 2324,
pp.1312-1331,
2020.
33
Fatemeh Zamani, F. Nadipour, M. Latifi, A. Merati,
"Comparison of Structural Modifcation and Argon Plasma Treatment of Poly(lactide-co-glycolic acid) Nanofbrous Scaffolds for Cell Culture",
Journal of Textiles and Polymers,
vol. 8,
no. 2,
pp.33-40,
2020.
34
E. Sharifi Samani, F. Mousazadegan, R. Bagherzadeh, M. Latifi,
"PEG-PLA-PCL based electrospun yarns with curcumin control release property as suture",
Polymer Engineering and Science,
vol. 60,
no. 7,
pp.1520-1529,
2020.
35
E. Hassanabadi, M. Latifi, Andrs. F. Gualdr?n-reyes, Sofia Masi, Seog Joon Yoon, Macarena Poyatos, Beatriz Juli?n-l?pez, Iv?n Mora-ser?,
"Ligand & Band Gap Engineering: Tailoring the Protocol Synthesis for Achieving High-Quality CsPbI3 Quantum Dots",
Nanoscale,
vol. 12,
no. 0,
pp.14194-14203,
2020.
36
Saba Kalantari, Farideh Golbabaei, M. Latifi, Mohammad Ali Shokrgozar, Mehdi Yasri,
"Assessment of Electrospinning Antioxidant Nanofibers in Skin Exposure to Oxidative Stress",
Journal of Mazandaran University of Medical Sciences,
vol. 30,
no. 186,
pp.68-79,
2020.
37
Serena Danti, Bahareh Azimi, Mariarita Candito, Alessandra Fusco, M.S. Sorayani Bafqi, Claudio Ricci, Mario Milazzo, Caterina Cristallini, M. Latifi, Giovanna Donnarumma, Luca Bruschini, Andrea Lazzeri, Aura Astolfi, Stefano Berrettini,
"Lithium niobate nanoparticles as biofunctional interface material for inner ear devices",
Biointerphases,
vol. 15,
no. 3,
pp.1-18,
2020.
38
M.S. Sorayani Bafqi, M. Latifi, A.H. Sadeghi, R. Bagherzadeh,
"Expected lifetime of fibrous nanogenerator exposed to cyclic compressive pressure",
Journal of Industrial Textiles,
vol. 1,
no. 1,
pp.1-13,
2020.
39
S. Azmi, S. Hosseini Varkiani, M. Latifi, R. Bagherzadeh,
"Tuning energy harvesting devices with different layout angles robust the mechanical-to-electrical energy conversion performance",
Journal of Industrial Textiles,
vol. (0)0,
no. 2,
pp.1-17,
2020.
40
M.A. Rahiminia, M. Latifi, M. Sadighi,
"Elastic behavior of composites reinforced by 3D printed tubular lattice braid textures",
Rapid Prototyping Journal,
vol. 26,
no. 7,
pp.1277-1288,
2020.
41
S.S. Mirjalali Bandari, A. Asayesh, M. Latifi,
"The Effect of Fabric Structure and Strain Percentage on the Tensile Stress Relaxation of Rib Weft Knitted Fabrics",
Fibers and Polymers,
vol. 21,
no. 4,
pp.921-929,
2020.
42
M. Halvaei, Masoud Jamshidi, M. Latifi, Mojtaba Ejtemaei,
"Effects of volume fraction and length of carbon short fibers on flexural properties of carbon textile reinforced engineered cementitious composites (ECCs): an experimental and computational study",
Construction and Building Materials,
vol. 245,
no. 0,
pp.1-13,
2020.
43
P. Kheirkhah Barzoki, M. Latifi, Amir Masoud Rezadoust,
"Response surface methodology optimization of electrospinning process parameters to fabricate aligned Polyvinyl Butyral nanofibers for interlaminar toughening of phenolic-based composite laminates",
Journal of Industrial Textiles,
vol. 49,
no. 7,
pp.858-874,
2020.
44
A. Mahdavi Varposhti, M. Yousefzadeh, E. Kowsarie, M. Latifi,
"Enhancement of beta-phase crystalline structure and piezoelectric properties of flexible PVDF/ionic liquid surfactant composite nanofibers for potential application in sensing and self-powering",
Macromolecular Materials and Engineering,
vol. 305,
no. 190079,
pp.1-8,
2020.
45
F. Ghasemkhah Mashkaleh, M. Latifi, A. Hadjizadeh, Mohammad Ali Shokrgozar,
"Fabrication of Bovine Serum Albumin-Loaded Coaxial Electrospun Thread with an Aligned Core-Shell Fibrous Structure",
Journal of Textiles and Polymers,
vol. 8,
no. 1,
pp.75-84,
2020.
46
N. Moazeni, S. Mehdi, A. Merati, M. Latifi, Shohre Rouhani,
"Effect of stimuli-responsive polydiacetylene on the crystallization and mechanical properties of PVDF nanofibers",
Polymer Bulletin,
vol. 1,
no. 1,
pp.1-16,
2019.
47
Saba Kalantary, Farideh Golbabaei, M. Latifi, Mohammad Ali Shokrgozar, Mehdi Taseri,
"Feasibility of Using Vitamin E-Loaded Poly (?-caprolactone)/Gelatin Nanofibrous Mat to Prevent Oxidative Stress in Skin",
Journal of Nanoscience and Nanotechnology,
vol. 20,
no. 6,
pp.3554-3562,
2019.
48
Saba Kalantary, Farideh Golbabaei, M. Latifi, Mohammad Ali Shokrgozar, Mehdi Yaseri,
"Evaluation resistance levels of the PCL/Gt nanofber mats during exposure to PAHs for use in the occupational setting",
Sn Applied Sciences,
vol. 1,
no. 9,
pp.1-8,
2019.
49
A. Asayesh, S. Ehsanpour, M. Latifi,
"Prototyping and analyzing physical properties of Weft knitted spacer fabrics as a substitute for wound dressings",
Journal of The Textile Institute,
vol. 0,
no. 0,
pp.1-11,
2019.
50
P. Kheirkhah Barzoki, Amir-masoud Rezadoust, M. Latifi, Hamed Saghafi, Giangiacomo Minak,
"Effect of nanofiber diameter and arrangement on fracture toughness of out of autoclave glass/phenolic composites - Experimental and numerical study",
Thin-Walled Structures,
vol. 143,
no. 106251,
pp.1-9,
2019.
51
R. Yavari Ramesheh, F. Mousazadegan, M. Latifi,
"Investigation of Worsted Woven Fabric's Static Friction Coefficient Considering Fabric Direction",
Journal of The Textile Institute,
vol. 0,
no. 0,
,
2019.
52
P. Kheirkhah Barzoki, Hosein Ipakchi, Amir Masoud Rezadoust, M. Latifi, Masoud Esfandeh,
"Effects of a Nano-Interleave on the Interlaminar Fracture Toughness for Autoclave and Out-of-Autoclave Processed Glass/Phenolic Composites",
International Journal of Applied Mechanics,
vol. 11,
no. 5,
pp.1-15,
2019.
53
F. Zare Bidoki, N. Ezazshahabi, F. Mousazadegan, M. Latifi,
"Introduction of Protective Gloves and their Performance Evaluation Methods",
,
vol. 23,
no. 7,
pp.5-18,
2019.
54
F. Mohammadkhani, M. Montazer, M. Latifi,
"Microwave absorption and photocatalytic properties of magnetic nickel nanoparticles/recycled PET nanofibers web",
Journal of The Textile Institute,
vol. 110,
no. 11,
pp.1606-1614,
2019.
55
N. Khomarloo, F. Mousazadegan, M. Latifi, N. Hemmati Nejad,
"Assessment of Single-Layer and Three-Layer Reusable Surgical Gowns Performance in Terms of Bacterial Penetration in Wet State",
Fibers and Polymers,
vol. 20,
no. 3,
pp.555-561,
2019.
56
Babak Amini, R. Bagherzadeh, Mohammad Kashfi, M. Latifi, Neda Yavari, Soodeh Asadi Kani, Lingxue Kong,
"Flexible hybrid structure piezoelectric nanogenerator based on ZnO nanorod/PVDF nanofibers with improved output",
Rsc Advances,
vol. 9,
no. 18,
pp.10117-10123,
2019.
57
N. Saveh Shemshaki, R. Bagherzadeh, M. Latifi,
"Electrospun Metal Oxide Nanofbrous Mat as a Transparent Conductive Layer",
Organic Electronics,
vol. 70,
no. 0,
pp.131-139,
2019.
58
P. Aghasiloo, M. Yousefzadeh, M. Latifi, Rajan Jose,
"Highly porous TiO2 nanofibers by humid-electrospinning with enhanced photocatalytic properties",
Journal of Alloys and Compounds,
vol. 790,
no. 0,
pp.257-265,
2019.
59
F. Ghasemkhah Mashkaleh, M. Latifi, A. Hadjizadeh, Mohammad Ali Shokrgozar,
"Potential core-shell designed scaffolds with a gelatin-based shell in achieving controllable release rates of proteins for tissue engineering approaches",
Journal of Biomedical Materials Research Part A,
vol. 0,
no. 0,
pp.1-45,
2019.
60
Isaac Suarez, E. Hassanabadi, Alberto Maulu, Niccolo Carlino, Cecilia Ada Maestri, M. Latifi, Paolo Bettotti, Ivan Mora-sero, Juan P. Martinez-pastor,
"Integrated Optical Amplifer-Photodetector on a Wearable Nanocellulose Substrate",
Advanced Optical Materials,
vol. 6,
no. 12,
pp.1-8,
2019.
61
M. Soufi, P. Kheirkhah Barzoki, Amir Masoud Rezadoust, M. Latifi,
"The Effect of Curing Temperature on Interlaminar Toughening Ability of PVB Nanofiber at Phenolic-Based Composites",
International Journal of Mechanical and Production Engineering,
vol. 6,
no. 12,
pp.80-86,
2018.
62
Fatemeh Zamani, A. Merati, M. Latifi, Hosein Ghanbari Alanagh, F. Nadipour,
"Effect of Plasma Treatment on Cell Culture in Poly Lactic Glycolic Acid Nanofbrous Scaffold",
Modares Journal of Biotechnology,
vol. 9,
no. 4,
pp.635-641,
2018.
63
P. Khosravani, N. Ezazshahabi, M. Latifi,
"Characterization of the Effect of Fabric Structure on the Optical Properties of Woven Fabrics",
Research Journal of Textile and Apparel,
vol. 1,
no. 1,
pp.1-14,
2018.
64
Hossein Fashandi, H. Pakravan Charvadeh, M. Latifi,
"Application of Modified Carpet Waste Cuttings for Production of Eco-Efficient Lightweight Concrete",
Construction and Building Materials,
vol. 198,
no. 0,
pp.629-637,
2018.
65
P. Kheirkhah Barzoki, M. Latifi, Amir-masoud Rezadoust,
"The Outstanding effect of nanomat geometry on the interlaminar fracture toughness behavior out of autoclave made glass/phenolic composites under mode-I loading",
Engineering Fracture Mechanics,
vol. 0,
no. 0,
pp.108-119,
2018.
66
N. Naeimi, F. Mousazadegan, M. Latifi,
"Investigation of Seam Behavior against Tensile Loads",
,
vol. 5,
no. 21,
pp.29-38,
2018.
67
P. Kheirkhah Barzoki, Amir-masoud Rezadoust, M. Latifi,
"Tunable effect of polyvinyl butyral nanofiber veil on fracture toughness of glass reinforced phenolic composites manufactured with out of autoclave method",
Polymer Testing,
vol. 71,
no. 0,
pp.255-261,
2018.
68
E. Ahmadloo, A. Gharehaghaji, M. Latifi, Hamed Saghafi, N. Mohammadi,
"Effect of PA66 nanofiber yarn on tensile fracture toughness of reinforced epoxy nanocomposite",
Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science,
vol. 233,
no. 6,
pp.2033-2043,
2018.
69
F. Mousazadegan, M. Latifi,
"Investigating the Relation of Fabric's Buckling Behaviour and Tension Seam Pucker Formation",
Journal of The Textile Institute,
vol. 0,
no. 0,
pp.1-14,
2018.
70
P. Kheirkhah Barzoki, Amir-masoud Rezadoust, M. Latifi, Hamed Saghafi,
"The Experimental and Numerical Study on the Effect of PVB Nanofiber Mat Thickness on Interlaminar Fracture Toughness of Glass/Phenolic Composites",
Engineering Fracture Mechanics,
vol. 194,
no. 0,
pp.145-153,
2018.
71
N. Moazeni, A. Merati, M. Latifi, S. Mehdi, Shohre Rouhani,
"Fabrication and characterization of polydiacetylene supramolecules in electrospun polyvinylidene fluoride nanofibers with dual colorimetric and piezoelectric responses",
Polymer,
vol. 134,
no. 0,
pp.211-220,
2018.
72
A. Merati, M. Latifi, Fatemeh Zamani, Hosein Ghanbari Alanegh, F. Nadipour,
"Increasing the hydrophilicity of the electrospun nanofibrious layers of polylactic glycolic acid",
Advanced Materials Materials and Novel Coatings,
vol. 20,
no. 0,
pp.1429-1437,
2017.
73
H. Pakravan Charvadeh, Masoud Jamshidi, M. Latifi,
"The Effect of Hydrophilic (Polyvinyl Alcohol) Fiber Content on the Flexural Behavior of Engineered Cementitious Composites (ECC)",
Journal of The Textile Institute,
vol. 109,
no. 1,
pp.79-84,
2017.
74
F. Mokhtari, M. Latifi, M. Shamshirsaz,
"Applying the Genetic Algorithm for Determination Electrospinning Parameters of Poly Vinylidene Fluoride (PVDF) Nano Fibers: Theoretical & Experimental Analysis",
Journal of Textile Engineering & Fashion Technology,
vol. 3,
no. 3,
pp.640-648,
2017.
75
N. Ezazshahabi, M. Amani Tehran, M. Latifi,
"Predictive model for the frictional characteristics of woven fabrics optimized by the genetic algorithm",
Journal of The Textile Institute,
vol. 0,
no. 0,
pp.1-8,
2017.
76
N. Moazeni, M. Latifi, A. Merati, Shohre Rouhani,
"Crystal polymorphism in Polydiacetylene-embedded electrospun polyvinylidene fluoride nanofibers",
Soft Matter,
vol. 13,
no. 44,
pp.8178-8187,
2017.
77
B. Shahriyari, F. Mousazadegan, M. Latifi, H. Pakravan Charvadeh,
"Modifying mechanical properties of carbon textiles reinforced epoxy composite using multi-wall carbon nanotubes (MWCNT)",
Journal of The Textile Institute,
vol. 0,
no. 0,
pp.1-7,
2017.
78
M. Halvaei, M. Latifi, Masoud Jamshidi,
"Study of the microstructure and flexural behavior of cementitious composites reinforced by surface modified carbon textiles",
Construction and Building Materials,
vol. 158,
no. 158,
pp.243-256,
2017.
79
Salar Zohoori, M. Latifi, Abolfazl Davodiroknabadi, Mohammad Mirjalili,
"Vibration electrospinning of Polyamide-66/Multiwall Carbon Nanotube Nanocomposite: introducing electrically conductive, ultraviolet blocking and antibacterial properties",
Polish Journal of Chemical Technology,
vol. 19,
no. 3,
pp.56-60,
2017.
80
M.S. Sorayani Bafqi, R. Bagherzadeh, M. Latifi,
"Nanofiber alignment tuning:An engineering design tool in fabricating wearable power harvesting devices",
Journal of Industrial Textiles,
vol. 47,
no. 4,
pp.535-550,
2017.
81
G. Zandesh, A. Gheibi, M.S. Sorayani Bafqi, R. Bagherzadeh, M Ghoorchian, M. Latifi,
"Piezoelectric Electrospun Nanofibrous Energy Harvesting Devices: Influence of the Electrodes Position and Finite Variation of Dimensions",
Journal of Industrial Textiles,
vol. 47,
no. 3,
pp.348-362,
2017.
82
M. Ghahremanihonarvar, M. Latifi, M.R. Babaei,
"Simulation of conductivity made by inkjet-printed silver tracks in E-textiles with different weave patterns",
Journal of Industrial Textiles,
vol. 47,
no. 2,
pp.173-196,
2017.
83
S. Rahmani, A. Arefazar, M. Latifi,
"PMMA/PS coaxial electrospinning ; a statical analysis on processing parameters",
Materials Research Express,
vol. 4,
no. 0,
pp.1-9,
2017.
84
Yinjiang Zhang, Yi Zhao, M. Latifi, Rongwu Wang, Xiangyu Jin,
"Investigation of the Mechanical and Dispersible Properties of Wood Pulp/Danufil Wetlaid Nonwovens with/without Hydroentanglement",
Journal of The Textile Institute,
vol. 109,
no. 5,
pp.647-655,
2017.
85
E. Ahmadloo, A. Gharehaghaji, M. Latifi, N. Mohammadi, Saghafi, H,
"How fracture toughness of epoxy-based nanocomposite is affected by PA66 electrospun nanofiber yarn",
Engineering Fracture Mechanics,
vol. 0,
no. 0,
pp.1-19,
2017.
86
S. Rahmani, A. Arefazar, M. Latifi,
"PMMA/PS coaxial electrospinning : core-shell fiber morphology as a function of material parameters",
Materials Research Express,
vol. 4,
no. 3,
pp.1-8,
2017.
87
H. Pakravan Charvadeh, M. Latifi, Masoud Jamshidi,
"Hybrid short Fiber Reinforcement System in Concrete: A Review",
Construction and Building Materials,
vol. 142,
no. 0,
pp.280-294,
2017.
88
M. Nasrisfahani, M. Amani Tehran, M. Latifi, M. Halvaei, Laurent Warnet,
"Experimental and theoretical investigation of hollow polyester fibers effect on impact behavior of composites",
Journal of Industrial Textiles,
vol. 0,
no. 0,
pp.1-15,
2017.
89
N. Ezazshahabi, M. Amani Tehran, M. Latifi, K. Madanipour,
"Modelling of Surface Roughness Based on Geometrical Parameters of Woven Fabrics",
Indian Journal of Fibre and Textile Research,
vol. 42,
no. 0,
pp.43-50,
2017.
90
A. Fakhrali, S.V. Ebadi, A. Gharehaghaji, M. Latifi, Abdolrasool Moghassem,
"Interactions between PA6 Ratio and Tensile Properties in PVA/PA6 Hybrid Nanofiber Yarns",
Nano Hybrids and Composites,
vol. 14,
no. 0,
pp.25-37,
2017.
91
M. Ghahremanihonarvar, M. Latifi,
"Overview of wearable electronics and smart textiles",
Journal of The Textile Institute,
vol. 108,
no. 4,
pp.631-652,
2017.
92
F. Mokhtari, M. Shamshirsaz, M. Latifi, S. Asadi,
"Comparative evaluation of piezoelectric response of electrospun PVDF (polyvinilydine fluoride) nanofiber with various additives for energy scavenging application",
Journal of The Textile Institute,
vol. 107,
no. 12,
pp.1453-1462,
2016.
93
F. Mokhtari, M. Latifi, M. Shamshirsaz, M. Khelghatdoost, S. Rahmani,
"Modeling of electrospun PVDF/LiCl nanogenerator by the energy approach method: determining piezoelectric constant",
Journal of The Textile Institute,
vol. 108,
no. 9,
pp.1-9,
2016.
94
F. Memariyan, M. Amani Tehran, M. Latifi,
"Characterization of photocatalytic composite nanofiber yarns with respect to their tensile properties",
Journal of Industrial Textiles,
vol. 0,
no. 0,
pp.1-17,
2016.
95
M. Halvaei, Masoud Jamshidi, M. Latifi,
"Effects of Hybridization of Carbon and Polypropylene Short Fibers as Reinforcement on Flexural Properties of Fine Aggregate Concretes",
Civil Engineering Journal-Tehran,
vol. 2,
no. 10,
pp.520-528,
2016.
96
B. Najafloo, Amir Masoud Rezadoust, M. Latifi,
"Effect of Through-The-Thickness Areal Density and Yarn Fineness on the Mechanical Performance of three-dimensional Carbon-Phenolic Composites",
Journal of Reinforced Plastics and Composites,
vol. 35,
no. 20,
pp.1447-1459,
2016.
97
Somayeh Farhang Dehghan, Farideh Golbabaei, Bozorgmehr Maddah, M. Latifi, Hamid Pezeshk, Mahdi Hasanzadeh, Farhang Akbar-khanzadeh,
"Optimization of Electrospinning Parameters for PAN-MgO Nanofibers Applied in Air Filtration",
Journal of The Air and Waste Management Association,
vol. 66,
no. 9,
pp.912-921,
2016.
98
F. Mokhtari, M. Salehi Esfandarani, F. Zamani, F. Hajiani, F. Zeighami, M. Latifi,
"Advances in Electrospinning: the Production and Application of Nanofibres and Nanofibrous Structures",
Textile Progress,
vol. 48,
no. 3,
pp.119-219,
2016.
99
M. Halvaei, Masoud Jamshidi, M. Latifi,
"Strength Properties of Fine Aggregate Concretes Reinforced by Polyamide Fibers",
Journal of Industrial Textiles,
vol. 46,
no. 3,
pp.684-697,
2016.
100
M. Ghahremanihonarvar, M.R. Babaei, M. Latifi,
"Evaluating silver tracks conductivity on flexible surfaces",
Journal of Industrial Textiles,
vol. 46,
no. 2,
pp.530-548,
2016.
101
M.S. Sorayani Bafqi, R. Bagherzadeh, M. Latifi,
"Nanofiber alignment tuning: An engineering design tool in fabricating wearable power harvesting devices",
Journal of Industrial Textiles,
vol. 47,
no. 4,
pp.535-550,
2016.
102
M. Halvaei, Masoud Jamshidi, M. Latifi,
"Effect of Fiber Geometry and Tenacity on The Mechanical Properties of Fine Aggregates Concrete",
Journal of Industrial Textiles,
vol. 45,
no. 5,
pp.1083-1099,
2016.
103
M. Halvaei, Masoud Jamshidi, M. Latifi,
"Investigation on Pullout Behavior of Different Polymeric Fibers from Fine Aggregates Concrete",
Journal of Industrial Textiles,
vol. 45,
no. 5,
pp.995-1008,
2016.
104
F. Mokhtari, M. Latifi, M. Shamshirsaz,
"Electrospinning/Electrospray of Polyvinylidene Fluoride (PVDF):Piezoelectric NanoFibers",
Journal of The Textile Institute,
vol. 107,
no. 8,
pp.1037-1055,
2016.
105
H. Pakravan Charvadeh, M. Latifi, Masoud Jamshidi,
"Ductility improvement of cementitious composites reinforced with polyvinyl alcohol-polypropylene hybrid fibers",
Journal of Industrial Textiles,
vol. 45,
no. 5,
pp.637-651,
2016.
106
H. Pakravan Charvadeh, Masoud Jamshidi, M. Latifi,
"The Effect of Hybridization and Geometry of Polypropylene Fibers on Engineered Cementitious Composites Reinforced by Polyvinyl Alcohol Fibers",
Journal of Composite Materials,
vol. 50,
no. 8,
pp.1007-1020,
2016.
107
H. Pakravan Charvadeh, Masoud Jamshidi, M. Latifi,
"Study on Fiber Hybridization Effect of Engineered Cementitious Composites with low- and high-Modulus Polymeric Fibers",
Construction and Building Materials,
vol. 112,
no. 0,
pp.739-746,
2016.
108
A. Fakhrali, S.V. Ebadi, A. Gharehaghaji, M. Latifi, Abdolrasool Moghassem,
"Analysis of twist level and take-up speed impact on the tensile properties of PVA/PA6 hybrid nanofiber yarns",
E-Polymers,
vol. 16,
no. 2,
pp.125-135,
2016.
109
S. Golmohammadi Rostami, M.S. Sorayani Bafqi, R. Bagherzadeh, M. Latifi, Mohsen Gorji,
"Multi-layer Electrospun Nanofiber Mats with Chemical Agent Sensor Function",
Journal of Industrial Textiles,
vol. 45,
no. 3,
pp.467-480,
2016.
110
F. Mokhtari, M. Shamshirsaz, M. Latifi,
"B Phase Formation in Piezoelectric Response of Electrospun Polyvinylidene Fluoride (PVDF) NanoFibers : LiCl Additive and Increasing Fibers Tension",
Polymer Engineering and Science,
vol. 56,
no. 1,
pp.61-70,
2015.
111
P.N. Ghader Panah, F. Mokhtari, M. Latifi,
"Evaluation of False-Twist Textured Yarns by Image Processing",
Indian Journal of Fibre and Textile Research,
vol. 40,
no. 0,
pp.399-404,
2015.
112
N. Saveh Shemshaki, M. Latifi, R. Bagherzadeh, Mahdi Malekshahi Byranvand, Naimeh Naseri, Ali Dabirian,
"Synthesis of mesoporous functional hematite nanofibrous photoanodes by electrospinning",
Polymers For Advanced Technologies,
vol. 27,
no. 3,
pp.358-365,
2015.
113
F. Mokhtari, M. Latifi, M. Shamshirsaz,
"Electrospinning/electrospray of polyvinylidene fluoride (PVDF): piezoelectric nanofibers",
Journal of The Textile Institute,
vol. 107,
no. 11,
pp.1140-1159,
2015.
114
N. Ezaz Shahabi, M. Latifi, M. Amani Tehran,
"Analysis of Frictional Behavior of Woven Fabrics by a Multi-directional Tactile Sensing Mechanism",
Journal of Engineered Fibers and Fabrics,
vol. 10,
no. 3,
pp.129-135,
2015.
115
M. Halvaei, Masoud Jamshidi, H. Pakravan Charvadeh, M. Latifi,
"Interfacial Bonding of Fine Aggregate Concrete to Low Modulus Fibers",
Construction and Building Materials,
vol. 95,
no. 0,
pp.117-123,
2015.
116
F. Mokhtari, S. Hosseini Varkiani, M. Latifi,
"Evaluation of Floorcovering Abrasion Resistance by Means of Image Processing Technique",
Journal of Textiles and Polymers,
vol. 3,
no. 2,
pp.40-45,
2015.
117
N. Ezaz Shahabi, F. Mousazadegan, S. Saharkhiz, M. Latifi,
"Determining Formability Function of Worsted Woven Fabrics in the Term of fabric Direction",
Journal of Engineered Fibers and Fabrics,
vol. 10,
no. 2,
pp.1-10,
2015.
118
N. Ezaz Shahabi, M. Latifi, M. Amani Tehran, K. Madanipour,
"Measurement of Yarn Density in Woven Fabrics Using Fringe Projection Moir Techniques",
Indian Journal of Fibre and Textile Research,
vol. 40,
no. 2,
pp.203-207,
2015.
119
F. Memariyan, M. Amani Tehran, M. Latifi,
"TiO2 Nanofiber Yarns: a Prospective Candidate as a Photocatalyst",
Journal of Industrial and Engineering Chemistry,
vol. 23,
no. 0,
pp.182-187,
2015.
120
M.S. Sorayani Bafqi, R. Bagherzadeh, M. Latifi,
"Fabrication of Composite PVDF-ZnO Nanofiber Mats by Electrospinning for Energy Scavenging Application with Enhanced Efficiency",
Journal of Polymer Research,
vol. 22,
no. 7,
pp.1-9,
2015.
121
N. Ezaz Shahabi, M. Amani Tehran, M. Latifi, K. Madanipour,
"Surface Roughness Assessment of Woven Fabrics Using Fringe Projection Moir Techniques",
Fibres and Textiles In Eastern Europe,
vol. 23,
no. 0,
pp.76-84,
2015.
122
A. Safavi, M. Amani Tehran, M. Latifi,
"A new approach to theoretical modeling of heat transfer through fibrous layers incorporated with microcapsules of phase change materials",
Thermochimica Acta,
vol. 604,
no. 0,
pp.24-32,
2015.
123
A. Safavi, M. Latifi, M. Amani Tehran, Abbas Rezaee-shirin-abadi,
"Experimental Study of the Thermo-regulating Property of Clothing Systems Contained Different Melting Point Microencapsulated PCMs",
Journal of Textiles and Polymers,
vol. 3,
no. 1,
pp.7-11,
2015.
124
A. Safavi, M. Amani Tehran, M. Latifi,
"Evaluation of Dynamic Thermal Behavior of Fibrous Layers in Presence of Phase Change Material Microcapsules",
Thermochimica Acta,
vol. 594,
no. 0,
pp.16-23,
2014.
125
R. Bagherzadeh, M. Latifi, Lingxue Kong,
"Three-Dimensional Pore Structure analysis of Polycaprolactone Nano-Microfibrous Scaffolds Using Theoretical and Experimental Approaches",
Journal of Biomedical Materials Research Part A,
vol. 102,
no. 3,
pp.903-910,
2014.
126
S. Shahrabifarahani, A. Gharehaghaji, M. Latifi,
"Fabrication of electrospun polyamide-66 nanofiber layer for high-performance nanofiltration in clean room applications",
Journal of Industrial Textiles,
vol. 1,
no. 1,
pp.1-15,
2014.
127
A. Gheibi, R. Bagherzadeh, A. Merati, M. Latifi,
"Electrical power generation from piezoelectric electrospun nanofibers membranes: electrospinning parameters optimization and effect of membranes thickness on output electrical voltage",
Journal of Polymer Research,
vol. 21,
no. 11,
pp.1-14,
2014.
128
E. Hadipoor Goodarzi, M. Montazer, M. Latifi, A. Gharehaghaji,
"Electrospinning of Chitosan/Sericin/PVA Nanofibers Incorporated with in Situ Synthesis of Nano Silver",
Carbohydrate Polymers,
vol. 113,
no. 0,
pp.231-239,
2014.
129
M.S. Sorayani Bafqi, A. Gheibi, R. Bagherzadeh, M. Latifi,
"Flexible Fiber Nanogenerator Fabrication by Poly(vinyldene flouride) Piezo-Polymer",
,
vol. 2,
no. 11,
pp.35-38,
2014.
130
M. Nasrisfahani, M. Latifi, M. Amani Tehran, Laurent Warnet, M. Halvaei,
"Enhancement of Composite Performance by Hollow Polyester Fibers",
Journal of Textiles and Polymers,
vol. 2,
no. 2,
pp.45-50,
2014.
131
A. Gheibi, M. Latifi, A. Merati, R. Bagherzadeh,
"Piezoelectric Electrospun Nanofibrous Materials for Self-Powering Wearable Electronic Textiles Applications",
Journal of Polymer Research,
vol. 21,
no. 69,
pp.1-7,
2014.
132
H. Asgari, F. Mokhtari, M. Latifi, M. Amani Tehran,
"Characterizing Cotton Yarn Appearance due to Yarn-to-Yarn Abrasion by Image Processing",
Journal of The Textile Institute,
vol. 105,
no. 5,
pp.477-482,
2014.
133
H. Pakravan Charvadeh, Masoud Jamshidi, M. Latifi,
"Relationship between the surface free energy of hardened cement paste and chemical phase composition",
Journal of Industrial and Engineering Chemistry,
vol. 20,
no. 4,
pp.1737-1740,
2014.
134
F. Memariyan, M. Latifi, M. Amani Tehran,
"Innovative method for electrospinning of continuous TiO2 nanofiber yarns: Importance of auxiliary polymer and solvent selection",
Journal of Industrial and Engineering Chemistry,
vol. 20,
no. 4,
pp.1886-1891,
2014.
135
R. Bagherzadeh, M. Latifi, S. Shaikhzadeh Najar, Lingxue Kong,
"Experimental Verification of Theoretical Prediction of Fiber to Fiber Contacts in Electrospun Multilayer Nano-Microfibrous Assemblies: Effect of Fiber Diameter and Network Porosity",
Journal of Industrial Textiles,
vol. 43,
no. 4,
pp.483-495,
2014.
136
R. Bagherzadeh, M. Latifi, S. Shaikhzadeh Najar, M. Amani Tehran, Lingxue Kong,
"Application of Cd Se/ZnS Quantum Dots and Confocal Laser Scanning Microscopy for 3D Imaging of Nanofibrous Structures",
Journal of Industrial Textiles,
vol. 43,
no. 4,
pp.496-510,
2014.
137
M. Halvaei, Masoud Jamshidi, M. Latifi,
"Application of low modulus polymeric fibers in engineered cementitious composites",
Journal of Industrial Textiles,
vol. 43,
no. 4,
pp.511-524,
2014.
138
R. Bagherzadeh, M. Latifi, Lingxue Kong,
"Three-Dimensional Pore Structure Analysis of Polycaprolactone Nano-Microfibrous Scaffolds Using Theoretical and Experimental Approaches",
Journal of Biomedical Materials Research Part A,
vol. 102,
no. 3,
pp.903-910,
2014.
139
F. Zamani, M. Amani Tehran, M. Latifi, Mohammad Ali Shokrgozar, Arash Zamini,
"Promotion of Spinal Cord Axon Regeneration by 3D Nanofibrous Core-Sheath Scaffolds",
Journal of Biomedical Materials Research Part A,
vol. 102,
no. 2,
pp.506-513,
2014.
140
M. Maleki, M. Amani Tehran, M. Latifi, Sanjay Mathur,
"Drug Release Profile in Core-Shell Nanofibrous Structures: A Study on Peppas Equation and Artificial Neural Network Modeling",
Computer Methods and Programs In Biomedicine,
vol. 113,
no. 1,
pp.92-100,
2014.
141
M. Maleki, M. Amani Tehran, M. Latifi, Sanjay Mathur,
"A Study on Electrospun Nanofibrous Mats for Local Antibiotic Delivery",
Advanced Materials Research,
vol. 829,
no. 0,
pp.510-514,
2013.
142
F. Mousazadegan, N. Ezaz Shahabi, M. Latifi, S. Saharkhiz,
"Formability Analysis of Worsted Woven Fabrics Considering Fabric Direction",
Fibers and Polymers,
vol. Fibers and,
no. 11,
pp.1933-1942,
2013.
143
Z. Komeili Nia, M. Montazer, M. Latifi,
"Synthesis of Nano Copper/Nylon Composite Using Ascorbic Acid and CTAB",
Colloids and Surfaces A-Physicochemical and Engineering Aspects,
vol. 439,
no. 0,
pp.167-175,
2013.
144
H. Pakravan Charvadeh, Masoud Jamshidi, M. Latifi,
"Polymeric Fibers Pull-out Behavior and Microstructure as Cementitious Composites Reinforcement",
Journal of The Textile Institute,
vol. 104,
no. 10,
pp.1056-1064,
2013.
145
F. Mokhtari, S. Mirzadeh Vaghefi, M. Shamshirsaz, M. Latifi,
"Analysis of Compressibility Behavior in Warp Knitted Spacer Fabrics: Experiments and Van Wyk Theory",
Journal of Engineered Fibers and Fabrics,
vol. 8,
no. 3,
pp.125-130,
2013.
146
M. Maleki, M. Latifi, M. Amani Tehran, Sanjay Mathur,
"Electrospun Core-Shell Nanofibers for Drug Encapsulation and Sustained Release",
Polymer Engineering and Science,
vol. 53,
no. 8,
pp.1770-1779,
2013.
147
R. Bagherzadeh, S. Shaikhzadeh Najar, M. Latifi, M. Amani Tehran, Lingxue Kong,
"A Theoretical Analysis and Prediction of Pore Size and Pore Size Distribution in Electrospun Multilayer Nanofibrous Materials",
Journal of Biomedical Materials Research Part A,
vol. 101A,
no. 7,
pp.2107-2117,
2013.
148
T. Solimani, A. Merati, M. Latifi, A. Ramezanianpor,
"Inhibition of Cracks on the Surface of Cement Mortar Using Estabragh Fibers",
Advances In Materials Science and Engineering,
vol. 2013,
no. 656109,
pp.1-5,
2013.
149
F. Zamani, M. Amani Tehran, M. Latifi, Mohammad Ali Shokrgozar,
"The Influence of Surface Nanoroughness of Electrospun PLGA Nanofibrous Scaffold on Nerve Cell Adhesion and Proliferation",
Journal of Materials Science-Materials In Medicine,
vol. 24,
no. 6,
pp.1551-1560,
2013.
150
F. Zamani, M. Latifi, M. Amani Tehran, Mohammad Ali Shokrgozar,
"Effects of PLGA Nanofibrous Scaffolds Structure on Nerve Cell Directional Proliferation and Morphology",
Fibers and Polymers,
vol. 14,
no. 5,
pp.698-702,
2013.
151
F. Mousazadegan, S. Saharkhiz, M. Latifi, M. Mohammadi Aghdam,
"Seam Pucker Rating by Deconvolution Residual Method",
International Journal of Clothing Science and Technology,
vol. 25,
no. 3,
pp.150-170,
2013.
152
M. Halvaei, Masoud Jamshidi, M. Latifi, Z. Behdouj,
"Performance of Low modulus Fibers in Engineered Cementitious Composites (ECCs): Flexural Strength and Pull out resistance",
Advanced Materials Research,
vol. 687,
no. 0,
pp.495-501,
2013.
153
Z. Behdouj, Masoud Jamshidi, M. Latifi, M. Halvaei,
"Effect of Cross Sectional Shape of Polypropylene Fibers on Flexural Toughness of Composites and Fiber-to-Cement Matrix Adhesion",
Advanced Materials Research,
vol. 687,
no. 0,
pp.485-489,
2013.
154
F. Zamani, M. Amani Tehran, M. Latifi, Mohammad Ali Shokrgozar, Arash Zaminy,
"Promotion of spinal cord axon regeneration by 3D nanofibrous core-sheath scaffolds",
Journal of Biomedical Materials Research Part A,
vol. 0,
no. 0,
,
2013.
155
R. Bagherzadeh, M. Latifi, S. Shaikhzadeh Najar, M. Amani Tehran, Lingxue Kong,
"Three-Dimensional Pore Structure Analysis of Nano-Microfibrous Scaffolds Using Confocal Laser Scanning Microscopy",
Journal of Biomedical Materials Research Part A,
vol. 101A,
no. 3,
pp.765-774,
2013.
156
Abolfazl Davodi Roknabadi, M. Latifi, S. Saharkhiz, Hamed Aboltakhty, Amirshahin Sharifi,
"Optimizing Muller Body Measurement System for Given Iranian Population",
Middle East Journal of Scientific Research,
vol. 15,
no. 3,
pp.372-376,
2013.
157
M. Nasrisfahani, M. Latifi, M. Amani Tehran,
"Improvement of Impact Damage Resistance of Epoxy-Matrix Composites Using Ductile Hollow Fibers",
Journal of Engineered Fibers and Fabrics,
vol. 8,
no. 1,
pp.69-74,
2013.
158
N. Khadamalhosseini, M. Nasrisfahani, M. Latifi, S. Shaikhzadeh Najar,
"Modeling of Impact Damage of Sewing Machine Needle on Woven Fabric by Finite Element Method",
Journal of Textiles and Polymers,
vol. 1,
no. 1,
pp.19-23,
2013.
159
H. Pakravan Charvadeh, Masoud Jamshidi, M. Latifi, F. Pacheco-torgal,
"Cementitious Composites Reinforced with Polypropylene, Nylon and Polyacrylonitrile Fibres",
Materials Science Forum,
vol. 730-732,
no. 0,
pp.271-276,
2013.
160
R. Bagherzadeh, H. Pakravan Charvadeh, A.H. Sadeghi, M. Latifi, A. Merati,
"An Investigation on Adding Polypropylene Fibers to Reinforce Lightweight Cement Composites (LWC",
Journal of Engineered Fibers and Fabrics,
vol. 7,
no. 4,
pp.13-21,
2012.
161
Abolfazl Davodi Roknabadi, M. Latifi, S. Saharkhiz, Hamed Aboltakhti,
"Human Body Measurement System in Clothing Using Image Processing",
World Applied Sciences Journal,
vol. 19,
no. 1,
pp.912-919,
2012.
162
S. Faraji Khah, K. Madanipour, S. Saharkhiz, M. Latifi,
"Shadow Moire Aided 3-D Reconstruction of Fabric Drape",
Fibers and Polymers,
vol. 13,
no. 7,
pp.928-935,
2012.
163
F. Mousazadegan, S. Saharkhiz, M. Latifi,
"Prediction of Tension Seam Pucker Formation by Finite-Element Model",
International Journal of Clothing Science and Technology,
vol. 24,
no. 2,
pp.129-140,
2012.
164
H. Pakravan Charvadeh, Masoud Jamshidi, M. Latifi, M M Chehimi,
"Polymeric Fibre Adhesion to the Cementitious Matrix Related to the Fibres Type, Water to Cement Ratio and Curing Time",
International Journal of Adhesion and Adhesives,
vol. 35,
no. 0,
pp.102-107,
2012.
165
M. Yousefzadeh, M. Latifi, M. Amani Tehran, Wee-eong Teo, Seeram Ramakrishna,
"A Note on the 3D Structural Design of Electrospun Nanofibers",
Journal of Engineered Fibers and Fabrics,
vol. 7,
no. 2,
pp.17-23,
2012.
166
R. Bagherzadeh, Mohsen Gorji, M. Latifi, Pedram Payvandy, L. X. Kong,
"Evolution of Moisture Management Behavior of High-wicking 3D Warp Knitted Spacer Fabrics",
Fibers and Polymers,
vol. 13,
no. 4,
pp.529-534,
2012.
167
H. Pakravan Charvadeh, Masoud Jamshidi, M. Latifi, F. Pacheco-torgal,
"Influence of Acrylic Fibers Geometry on the Mechanical Performance of Fiber-Cement Composites",
Journal of Applied Polymer Science,
vol. 125,
no. 125,
pp.3050-3057,
2012.
168
H. Pakravan Charvadeh, Masoud Jamshidi, M. Latifi,
"Adhesion of Polypropylene Fiber to Cement Matrix",
Journal of Adhesion Science and Technology,
vol. 26,
no. 26,
pp.1383-1393,
2012.
169
H. Pakravan Charvadeh, Masoud Jamshidi, M. Latifi, F.pacheco-torgal,
"Evaluation of Adhesion in Polymeric Fibre Reinforced Cementitious Composites",
International Journal of Adhesion and Adhesives,
vol. 32,
no. 0,
pp.53-60,
2012.
170
H. Pakravan Charvadeh, Masoud Jamshidi, M. Latifi,
"Investigation on Polymeric Fibres as Reinforcement in Cementitious Composites: Flexural Performance",
Journal of Industrial Textiles,
vol. -,
no. 0,
,
2011.
171
R. Bagherzadeh, M. Latifi, S. Shaikhzadeh Najar, M. Amani Tehran, Mohsen Gorji, Lingxue Kong,
"Transport Properties of Multilayer Fabric Based on Electrospun Nanofiber Mats as a Breathable Barrier Textile Material",
Textile Research Journal,
vol. -82,
no. 1,
pp.70-76,
2011.
172
F. Mokhtari, M. Shamshirsaz, M. Latifi,
"Compressibility Behaviour of Warp Knitted Spacer Fabrics Based on Elastic Curved Bar Theory",
Journal of Engineered Fibers and Fabrics,
vol. 6,
no. 4,
pp.23-33,
2011.
173
R. Bagherzadeh, A.H. Sadeghi, M. Latifi,
"Utilizing polypropylene fibers to improve physical and mechanical properties of concrete",
Textile Research Journal,
vol. 82,
no. 1,
,
2011.
174
F. Memariyan, M. Amani Tehran, M. Latifi,
"Rank Ordering and Image Processing Methods Aided Fabric Wrinkle Evaluation",
Fibers and Polymers,
vol. 12,
no. 6,
pp.830-835,
2011.
175
H. Pakravan Charvadeh, Masoud Jamshidi, M. Latifi,
"Flexural Behavior of Cementitious Composites Reinforced by Synthetic Fibers",
Amirkabir International Journal of Modeling, Identification,Simulation & Control,
vol. 43,
no. 1,
pp.55-61,
2011.
176
H. Pakravan Charvadeh, Maaoud Jamshidi, M. Latifi, M. Neshastehriz,
"Application of Polypropylene Nonwoven Fabrics for Cement Composites Reinforcement",
Asian Journal of Civil Engineering (Building and Housing,
vol. 12,
no. 5,
pp.551-562,
2011.
177
S. Fathi Khalf Badam, M. Latifi, S. Shaikhzadeh Najar, F. Towhidkhah,
"Analysis and Simulation of Fiber Dispersion in Water Using a Theoretical Analogous Model",
Journal of Dispersion Science and Technology,
vol. 32,
no. 3,
pp.352-358,
2011.
178
M. Yousefzadeh, M. Latifi, Wee-eong Teo, M. Amani Tehran, Seeram Ramakrishna,
"Producing Continuous Twisted Yarn from Well-Aligned Nanofibers by Water Vortex",
Polymer Engineering and Science,
vol. 51,
no. 2,
pp.323-329,
2011.
179
M. Yousefzadeh, M. Amani Tehran, M. Latifi, S. Ramakrishan,
"Morphology and Mechanical Properties of Polyacrylonitrile/Multi-Walled CarbonNanotube (PAN/MWNTs) Nanocomposite Electrospun Nanofibers",
Scientia Iranica,
vol. 17,
no. 1,
,
2010.
180
E Shim, Behnam Pourdeyhimi, M. Latifi,
"Three-Dimensional Analysis of Segmented Pie Bi-component Nonwovens",
Journal of The Textile Institute,
vol. 101,
no. 9,
pp.773-787,
2010.
181
H. Ramzani Kebria, M.R. Babaei, M. Latifi,
"Measurement and Evaluation of Registration in Fabric Digital Printing",
Amirkabir Journal of Science & Technology,
vol. 20,
no. 70,
pp.61-69,
2010.
182
P. Peivandi, M. Latifi, M. Agha-mirsalim, J. Shokrollahi Moghani,
"Rotational Electromagnetic-Field-Aided False Twisting of Metallic Filaments",
Journal of The Textile Institute,
vol. 101,
no. 6,
,
2010.
183
R. Bagherzadeh, M. Latifi, A. R. Faramarzi,
"Employing a Three-Stage Data Mining Procedure to Develop Sizing System",
World Applied Sciences Journal,
vol. 8,
no. 8,
pp.923-929,
2010.
184
H. Pakravan Charvadeh, , Masoud Jamshidi, M. Latifi,
"Performance of fibers embedded in a cementitious matrix",
Journal of Applied Polymer Science,
vol. 116,
no. 3,
pp.1247-1253,
2010.
185
H. Pakravan Charvadeh, , M. Latifi,
"Performance of Fibers Embedded in a Cementitious Matrix",
Journal of Applied Polymer Science,
vol. 116,
no. 3,
pp.1247-1253,
2010.
186
P. Peivandi, M. Yousefzadeh, M. Latifi,
"A Note on Neurofractal-Based Defect Recognition and Classification in Nonwoven Web Images",
Journal of The Textile Institute,
vol. ,
no. 1,
,
2010.
187
F. Zamani, M. Amani Tehran, M. Latifi,
"Interactive Genetic Algorithm -Aided Generation of Carpet Pattern",
Journal of The Textile Institute,
vol. ,
no. 6,
,
2009.
188
M. Maleki, M. Latifi, M. Amani Tehran,
"Definition of structural features of nanon coated webs by image processing methods",
Nanotechnology,
vol. ,
no. 12,
,
2009.
189
M. Karamad, M. Latifi, M. Amani Tehran,
"Nondestructive Identification of Knot Types in Hand-Made Carpet. Part I: Feature Extraction from Grey Images",
Journal of Nondestructive Evaluation,
vol. ,
no. 28,
,
2009.
190
M. Nasrisfahani, M. Amani Tehran, M. Latifi,
"Simulation of ballistic impact on fabric armour using finite-element method",
Journal of The Textile Institute,
vol. ,
no. 4,
,
2009.
191
A. Safavi, S. Fathi Khalf Badam, M.R. Babaei, Z. Mansoori, M. Latifi,
"Experimental and Numerical Analysis of Fiber Characteristics Effects Fiber Dispersion for Wet-Laid Nonwoven",
Fibers and Polymers,
vol. ,
no. 2,
,
2009.
192
P. Peivandi, M. Latifi, M. Agha-mirsalim,
"Interlacing metallic filaments by rotational permanent magnetic field",
Fibers and Polymers,
vol. ,
no. 5,
,
2008.
193
M. Latifi,
"A Note on an Optical Method to Evaluate Fiber Dispersion in Wet-Laid Nonwoven Process",
Textile Research Journal,
vol. ,
no. 78,
,
2008.
194
D. Semnani, K. Matin, M. Shakhzadeh, M. Latifi,
"Automation of Stitch Length Cams in High Speed Flat Weft Knitting Machines :Online Control System and Numerical Modeling Method",
International Journal of Applied Engineering Research,
vol. 3,
no. 6,
pp.763-772,
2008.
195
M. Karamad, M. Latifi, M. Amani Tehran,
"Identification of Internal Structure of Hand-made Carpet Using Microfocus CT Scan Images Resulted from Inverse Radon Transform",
Iranian Journal of Hand Woven Carpet - Goljaam,
vol. ,
no. 9,
,
2008.
196
M. Karamad, M. Latifi, M. Haghighat Kish,
"Analysis of Compressibility Behavior of Hand-Made Carpet Pile",
Iranian Journal of Hand Woven Carpet - Goljaam,
vol. ,
no. 8,
,
2007.
197
R. Bagherzadeh, M. Montazer, M. Latifi,
"Evaluation of Comfort Properties of Polyester Knitted Spacer Fabrics Finished With Water Repellent and Antimicrobial Agents",
Fibers and Polymers,
vol. ,
no. 4,
,
2007.
198
A. Shams Nateri, S.H. Amirshahi, M. Latifi,
"Prediction of Yarn Cross-Sectional Color From Longitudinal Color by Neural Network",
Research Journal of Textile and Apparel,
vol. ,
no. 2,
,
2006.
199
D. Semnani, M. Latifi, M. Amani Tehran,
"Grading of Yarn Appearance Using Image Analysis and an Artificial Intelligence Technique",
Textile Research Journal,
vol. ,
no. 30,
,
2006.
200
D. Semnani, M. Latifi, M. Amani Tehran, , A.A. Marati,
"Development of Appearance Grading Method of Cotton Yarns for Various Types of Yarns",
Research Journal of Textile and Apparel,
vol. ,
no. 0,
,
2005.
201
D. Semnani, M. Latifi, M. Amani Tehran, , A.A. Marati,
"Effect of Yarn Appearance on Apparent Quality of Weft Knitted Fabric",
Journal of The Textile Institute,
vol. ,
no. 96,
,
2005.
202
M. Yousefzadeh, M. Amani Tehran, M. Latifi, M.R. Mohaddes Mojtahedi,
"Characterizing Bulkiness and Hairiness of air -Jet Textured Yarn Using Imaging Techniques",
Journal of The Textile Institute,
vol. 0,
no. 0,
,
2005.
203
M. Latifi, S. Shaikhzadeh Najar, A. Ghazi Saeidi,
"Computer Vision -Aided Fabric Inspection System for on -Circular Knitting Machine",
Textile Research Journal,
vol. ,
no. 0,
,
2005.
204
M. Latifi, M. Amani Tehran, A. Merati,
"Effect of Yarn Appearance on apparent Quality of Weft Knitted Fabric",
Journal of The Textile Institute,
vol. 96,
no. 5,
,
2005.
205
M. Yousefzadeh, M. Amani Tehran, M. Latifi, M.R. Mohaddes Mojtahedi,
"Determination of Crimp Indexes of False Twist and Knit de Knit Textured Yarns Using Computer Vision",
Amirkabir Science and Research Journal,
vol. 0,
no. 0,
,
2005.
206
M. Kamali Dolat Abady, M. Montazer, M. Latifi,
"The effect of polyester fibres on quality of hand-knotted carpets",
Journal of The Textile Institute,
vol. ,
no. 0,
,
2005.
207
S. Shaikhzadeh Najar, , M. Latifi,
"Contributions of in-plane fabric tensile properties in woven fabric bagging behaviour using a new developed test method",
International Journal of Clothing Science and Technology,
vol. ,
no. 5,
,
2004.
208
M. Latifi, M. Amani Tehran, S. Etrati, A. Sadri,
"Fault Detection of Plain Circular Knitted Fabrics Using Wavelet Transform",
Esteghlal Journal of Science & Technology,
vol. ,
no. 1,
,
2004.
209
S. Shaikhzadeh Najar, , M. Latifi, A. Ghazi Saeidi, A.H. Rezaei,
"Detecting defects in weft-knitted fabrics using texture-recognition methods",
Research Journal of Textile and Apparel,
vol. 0,
no. 0,
,
2004.
210
D. Semnani, M. Latifi, S. Hamzeh, A.A. Asgharian Jeddi,
"A new aspect of geometrical and physical principles applicable to the estimation of textiles structures:Ideal model for knitted loop",
Journal of The Textile Institute,
vol. ,
no. 0,
,
2003.
211
S.H. Amirshahi, A. Shams Nateri, M. Latifi,
"Prediction of Reflectance Values of Acrylic Fibers along the length and Cross Section Using Geometric Model",
Amirkabir Journal of Science & Technology,
vol. 0,
no. 53,
,
2003.
212
A. Shams Nateri, S.H. Amirshahi, M. Latifi,
"Using the Geometrical Model to Explain the Longitudinal and Cross-Sectional Reflection Behaviors of Acrylic Yarns",
Esteghlal Journal of Science & Technology,
vol. ,
no. 2,
,
2003.
213
S.H. Amirshahi, M. Latifi, A. Shams Nateri,
"Color matching of blends prepared from black and white fibers by neaural networks",
International Journal of Engineering,
vol. ,
no. 1,
,
2002.
214
M. Latifi, H.s Kimd,
"Characterizing fabric piling due to fabric- to- fabric abrasion",
Textile Research Journal,
vol. ,
no. 0,
,
2001.
215
H.s Kimd, M. Latifi,
"Evaluation of fuzz in nonwovens",
,
vol. ,
no. 1,
,
2000.
216
M. Safar Johari, M. Latifi, M. Amani Tehran, H. Tajeri,
"Measurement of Yarn Diameter and Hairiness by Means of Image Analysis System",
Amirkabir Journal of Science & Technology,
vol. 0,
no. 37,
,
1998.
217
A.A. Asgharian Jeddi, S. Hamzeh, M. Latifi,
"A comparative theoretical analysis for a knitted loop model",
International Journal of Engineering,
vol. 0,
no. 0,
,
1998.
218
M. Latifi,
"A unique software for multibar raschel design and manufacture",
,
vol. ,
no. 0,
,
1997.
219
A.A. Asgharian Jeddi, S. Hamzeh, M. Latifi,
"A Comparative Two-Dimensional Model for Weft Knitted Loop",
Amirkabir Journal of Science & Technology,
vol. 0,
no. 30,
,
1996.
220
M. Latifi, S.c. Hardlock, J.a. Smith,
"A C.A.D system for warp knits",
,
vol. ,
no. ,
,
1991.
221
M. Latifi,
"Overcoming some of the problems associated with the design of warpKnitted fabrics by the of a computer aided design",
Amirkabir Journal of Science & Technology,
vol. 0,
no. 0,
,
1991.