محسن خواجه زاده - دانشگاه صنعتی امیرکبیر

رساله‌های دکتری

#

عنوان پایان‌نامه

توسط

تاریخ دفاع

1

بررسی تجربی و تحلیلی فرآیند پرداخت کاری دورانی جریان ساینده مگنتورئولوژیکال به کمک ارتعاشات التراسونیک

یحیی چوپانی و محسن خواجه زاده

آبان 1400

پایان‌نامه‌های کارشناسی ارشد

#

عنوان پایان‌نامه

توسط

تاریخ دفاع

1

طراحی و بهبود خواص جوهر زیستی مناسب برای چاپ زیستی سه بعدی بافت دیسک بین مهره‌ای

احسان ابرقوئی و محسن خواجه زاده

اسفند 1401

2

بهینه سازی درصد ترکیبات هیدروژل و پارامترهای چاپ با هدف بهبود پرینت پذیری

مهدیه خطاطی و محسن خواجه زاده

اسفند 1401

3

طراحی و توسعه لایه رنگی ساختار معادل پوست توسط تکنولوژی چاپ زیستی سه بعدی

نیوشا قنبرنژادداریانی و محسن خواجه زاده

اسفند 1401

4

مطالعه تجربی تأثیر اعمال میدان مغناطیسی بر فرایند پوشش دهی سطح با لیزر

فرید عبدالعلی زاده و محسن خواجه زاده

مهر 1401

5

مطالعه تجربی تأثیر شکل تابع جریان پالسی بر فرسایش ابزار در فرایند سوراخکاری تخلیه الکتروشیمیایی

رضا ظفریان و محسن خواجه زاده

خرداد 1401

6

مطالعه تجربی تنش پسماند، سختی و زبری سطح در فرآیند بال برنشینگ به کمک لیزر

علیرضا خدابنده و محسن خواجه زاده

خرداد 1401

7

مطالعه تجربی اثر پارامترهای ماشینکاری بر مقاومت به خوردگی الکتروشیمیایی قطعات ماشینکاری شده توسط فرایند تراشکاری به کمک ارتعاشات آلتراسونیک یک بعدی

فرامرز مهدیخانی راوری و محسن خواجه زاده

مهر 1400

8

تاثیر کار سرد بر روی گرده جوش جهت ایجاد تنش های پسماند فشاری

رضا رستمی شهربابکی و محسن خواجه زاده

مهر 1400

9

بررسی تجربی اثر حضور میدان مغناطیسی بر فرسایش ابزار در فرآیند سوراخکاری تخلیه الکتروشیمیایی

حامد جعفرنیا و محسن خواجه زاده

شهریور 1400

10

ساخت و بررسی خواص مکانیکی داربست پایه پلی کاپرولاکتون در کاربردهای مرتبط با دندان به کمک چاپ سه بعدی زیستی

محمدماهان تقوی فرهی و محسن خواجه زاده

شهریور 1400

11

مطالعه تجربی تأثیر پارامترهای فرایند سختکاری سطحی با استفاده همزمان از لیزر و ارتعاشات آلتراسونیک بر استحکام خستگی فولاد

حسین طاهری و محسن خواجه زاده

شهریور 1400

12

مطالعه تجربی تاثیر تنش پسماند و صافی سطح ناشی از فرایند رولر برنیشینگ بر مقاومت به خوردگی قطعات

دانیال صیادی و محسن خواجه زاده

تیر 1400

13

توسعه نرم افزار چاپ زیستی جهت اصلاح مسیر چاپ برای یک پرینتر سه بعدی زیستی

معصومه منصور و محسن خواجه زاده

تیر 1400

14

مطالعه تجربی اثر حضور ارتعاشات آلتراسونیک بر فرسایش ابزار در فرآیند سوراخکاری تخلیه الکتروشیمیایی

محمد باقری و محسن خواجه زاده

خرداد 1400

15

مطالعه تجربی و شبیه‌سازی المان محدود تنش پسماند در فرایند تراشکاری به کمک لیزر

عارف بختیاری رنانی و محسن خواجه زاده

شهریور 1399

16

مطالعه‌ی تجربی و شبیه‌سازی المان محدود توزیع حرارت در فرایند سنگ‌زنی به کمک لیزر

محسن نادی و محسن خواجه زاده

شهریور 1399

17

شبیه سازی و بهینه سازی یک ناحیه هم دما توسط الکترود های مدار چاپی در دستگاه تکثیر دی ان ای

شقایق مس فروش مشهد و محسن خواجه زاده

تیر 1399

18

مطالعه تجربی و شبیه سازی المان محدود نیروی برش و درجه حرارت در فرایند فرزکاری به کمک لیزر

اختر حاجی اسماعیل زاده و محسن خواجه زاده

بهمن 1398

19

مطالعه تجربی آستانه فرسایش ابزار در فرآیند تراشکاری به کمک ارتعاشات آلتراسونیک بیضوی

امید بوستانی پور و محسن خواجه زاده

بهمن 1397

20

مطالعه تجربی و عددی توزیع درجه حرارت متوسط ابزار برش در فرآیند تراشکاری به کمک ارتعاشات آلتراسونیک بیضوی

سیدمهدی قادری و محسن خواجه زاده

بهمن 1397

21

مطالعه تجربی و شبیه‌سازی المان محدود تنش پسماند در فرایند تراشکاری به کمک حرارت

سپیده امیرحسینی و محسن خواجه زاده

بهمن 1396

22

مطالعه تجربی و شبیه سازی المان محدود تنش پسماند در فرآیند تراشکاری به کمک ارتعاشات آلتراسونیک و پلاسما

بهنام محرابی و محسن خواجه زاده

بهمن 1396

کتب

#

عنوان

نگارندگان/مترجمان

کشور ناشر

تاریخ انتشار

نسخه

داده های ثبت شده در پورتال

1

اصول ماشینکاری و ماشین های ابزار

محمدرضا رازفر, محسن خواجه زاده

ایران

1399

1

2

طراحی اجزای ماشین جلد چهارم (طرح‌های مکانیکی)

مهدی اخلاقی, محسن خواجه زاده

ایران

1395

1

مقالات ژورنال

داده های ثبت شده در پورتال

1

Mohammadreza Khosrojerdi, Mohammad Reza Razfar, Rasul Fesharakifard, Mohsen Khajehzadeh, "Improvement of the frictional behavior of Al 7075-T6 by ultrasonic-assisted ball burnishing process", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 0, Num. 0, Page 1-11, December 2022,

2

Mohamad Sina Sadeghi, Maede Mohseni, Ardeshir Hemasian Etefagh, Mohsen Khajehzadeh, "The effect of process parameters and scanning strategies on surface roughness of stainless steel 316L SLM parts", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. 0, Num. 0, Page 1-10, November 2022,

3

Mohammad Bagheri, Daniyal Sayadi, Ardeshir Hemasian Etefagh, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Drilling of Al2O3 ceramic using ultrasonic assisted electrochemical discharge machining process", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. 0, Num. 0, Page 1-16, November 2022,

4

Seyyed Sajjad Ahmadpoor, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Finite element simulation and experimental investigation of machining induced residual stresses in ultrasonic elliptical vibration-assisted turning", MACHINING SCIENCE AND TECHNOLOGY, Vol. 26, Num. 3, Page 1-19, October 2022,

5

Elahe Jalilvand, Nabiolah Abolfathi, Mohsen Khajehzadeh, Mojtaba Hassani-Gangaraj, "Optimization of cervical cage and analysis of its base material: A finite element study", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, Vol. 0, Num. 0, Page 1-13, October 2022,

6

Sayed Mohamad Nikouei, Mohammad Reza Razfar, Mohsen Khajehzadeh, "Experimental Study and Finite Element Simulation of Cutting Tool Temperature in Laser Assisted Machining", , Vol. 54, Num. 6, Page 1-15, September 2022,

7

Yahya Choopani, Mohammad Reza Razfar, Mohsen Khajehzadeh, Mohammadreza Khosrojerdi, "Design and development of ultrasonic assisted-rotational magnetorheological abrasive flow finishing (UA-RMRAFF) process", APPLIED ACOUSTICS, Vol. 197, Num. 0, Page 1-21, July 2022,

8

Yahya Choopani, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Experimental investigations into the nano-finishing of Al2024 tubes using the rotational-magnetorheological abrasive flow finishing (R-MRAFF) process", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. 0, Num. 0, Page 1-13, April 2022,

9

Moosa Arsalani, Mohammad Reza Razfar, Amir Abdullah, Mohsen Khajehzadeh, "Experimental Study of the Effect of Initial Surface Roughness on Ball Burnishing Forces and Endurance Limit of AISI 4130 Hardened Steel", , Vol. 53, Num. 12, Page 5627-5644, February 2022,

10

Naser Abbasi, Mohammad Reza Razfar, S.Mehdi Rezaei, Khosro Madanipour, Mohsen Khajehzadeh, "Investigation of laser induced plasma assisted ablation of glass in presence of magnetic field", AUT Journal of Mechanical Engineering, Vol. 0, Num. 0, Page 1-23, January 2022,

11

Sayed Mohamad Nikouei, Mohammad Reza Razfar, Mohsen Khajehzadeh, "Influence of nanoparticles’ size on Inconel 718 machining induced residual stresses", MATERIALS AND MANUFACTURING PROCESSES, Vol. 0, Num. 0, Page 1-10, December 2021,

12

Naser Abbasi, Mohammad Reza Razfar, S.Mehdi Rezaei, Khosro Madanipour, Mohsen Khajehzadeh, "Experimental investigation of deep-hole micro-drilling of glass using LIPAA process", MATERIALS AND MANUFACTURING PROCESSES, Vol. 0, Num. 0, Page 1-11, November 2021,

13

Yahya Choopani, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Novel polishing media based on fiber for finishing hip joint implants", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 0, Num. 0, Page 1-17, September 2021,

14

Moosa Arsalani, Mohammad Reza Razfar, Amir Abdullah, Mohsen Khajehzadeh, "Experimental Study of the Effect of Initial Surface Roughness on Ball Burnishing Forces and Endurance Limit of AISI 4130 Hardened Steel", AUT Journal of Mechanical Engineering, Vol. 0, Num. 0, Page 1-14, August 2021,

15

Yahya Choopani, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Development of fiber flow finishing (FFF) process for polishing hip prostheses", Journal of Manufacturing Processess, Vol. 68, Num. 0, Page 1245-1260, July 2021,

16

Omid Rohani Raftar, Soheil Amiri, Mohsen Khajehzadeh, Mohammad Reza Razfar, "The influence of ultrasonic vibration amplitude and magnetic field intensity on microstructural characteristics in laser drilling of Ti6Al4V", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 0, Num. 0, Page 1-17, July 2021,

17

Omid Rohani Raftar, Mahdi Kaveh, Mohsen Khajehzadeh, Abdolreza Rahimi, Mohammad Reza Razfar, "Nano-lubricant influence on surface residual stresses in hard milling", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. 0, Num. 0, Page 1-12, March 2021,

18

Yahya Choopani, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Optimal parameters of abrasive flow finishing for hip joint implants", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 0, Num. 0, Page 1-14, February 2021,

19

Mohsen Khajehzadeh, Seyyed Sajjad Ahmadpoor, Omid Rohani Raftar, Mohammad Reza Beyki Sarveolya, Mohammad Reza Razfar, "Process parameters influence on cutting force and surface roughness during hybrid laser- and ultrasonic elliptical vibration-assisted machining", JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, Vol. 0, Num. 0, Page 1-17, January 2021,

20

Yahya Choopani, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Using inverse replica fixture technique for improving nano-finishing of hip joint implant in abrasive flow finishing process", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 0, Num. 0, Page 1-16, September 2020,

21

Soheil Amiri, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Magnetic field and ultrasonic aided laser drilling effect on Ti6Al4V microstructural characteristics", MATERIALS AND MANUFACTURING PROCESSES, Vol. 0, Num. 0, Page 1-10, August 2020,

22

Moosa Arsalani, Mohammad Reza Razfar, Amir Abdullah, Mohsen Khajehzadeh, "Fatigue behavior improvement of hardened parts using sequential hard turning, grinding, and ball burnishing operations", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 0, Num. 0, Page 1-13, August 2020,

23

Mohsen Khajehzadeh, Mohammad Reza Razfar, "Process parameters influence on laser-assisted machining-induced residual stresses", MATERIALS AND MANUFACTURING PROCESSES, Vol. 0, Num. 0, Page 1-10, July 2020,

24

Mohsen Khajehzadeh, Omid Boostanipour, Soheil Amiri, Mohammad Reza Razfar, "The influence of ultrasonic elliptical vibration amplitude on cutting tool flank wear", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 0, Num. 0, Page 1-14, June 2020,

25

Mohsen Khajehzadeh, Omid Boostanipour, Mohammad Reza Razfar, "Finite Element Simulation and Experimental investigation of Residual Stresses in Ultrasonic Assisted Turning", ULTRASONICS, Vol. 108, Num. 106208, Page 0-0, June 2020,

26

Mohsen Khajehzadeh, Mohammad Reza Razfar, "Experimental Study of Machining Residual Stresses in Plasma Assisted Turning Process", , Vol. 0, Num. 0, Page 1-19, May 2020,

27

Yahya Choopani, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Optimization of parameters affecting the magnetic abrasive finishing process using response surface method", , Vol. 0, Num. 0, Page 1-16, April 2019,

28

Mohsen Khajehzadeh, Javad Moradpour, Mohammad Reza Razfar, "Influence of nanolubricant particles’ size on flank wear in hard turning", MATERIALS AND MANUFACTURING PROCESSES, Vol. 0, Num. 0, Page 1-8, December 2018,

29

Mohsen Khajehzadeh, Javad Moradpour, Mohammad Reza Razfar, "Influence of nanofluids application on contact length during hard turning", MATERIALS AND MANUFACTURING PROCESSES, Vol. 0, Num. 0, Page 1-9, August 2018,

30

Naser Abbasi, Mohammad Reza Razfar, Mohsen Khajehzadeh, "Experimental Investigation and Finite difference modeling of cutting tool temperature distribution during ultrasonically assisted turning", , Vol. 50, Num. 3, Page 657-670, May 2018,

مقالات کنفرانس

داده های ثبت شده در پورتال

1

Shaghayegh Mesforoush Mashhad, Amir Jahanshahi, Mohsen Khajehzadeh, "Finite element simulation of isothermal regions in serpentine shaped PCB electrodes of a micro-PCR device ", (27th Iranian Conference on Electrical Engineering ( ICEE 2019, April 2019

2

Omid Rohani Raftar, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Multi Criteria Optimization of Laser Percussion Drilling Parameters on Titanium Alloy Sheet Ti6Al4V ", 27th Annual International Conference on Mechanical Engineering, April 2019

3

Yahya Choopani, Mohammad Bayat, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Principles of Design and Analysis of 12-Speed Gearbox Machine Lathe using Step-by-Step Method ", 27th Annual International Conference on Mechanical Engineering, April 2019

4

Majid Karimi Rizi, Behnam Mehrabi, Sepideh Amirhoseini, Mohsen Khajehzadeh, Mohammad Reza Razfar, "Finite element Simulation and Experimental Study of the cutting tool rake angle effect on the residual stresses during machining 20NiCrMo5 Steel ", 25th Annual International Conference on Mechanical Engineering, May 2017

5

Yasaman Baradaran, Mohsen Khajehzadeh, "Experimental investigation of the effect of TiO2 nano fluids on cutting tool crater wear using 3D scanner ", 25th Annual International Conference on Mechanical Engineering, May 2017

6

Sepideh Amirhoseini, Behnam Mehrabi, Majid Karimi Rizi, Mohammad Reza Razfar, Mohsen Khajehzadeh, "Finite Element Study of cutting parameters effects on residual stresses during the machining of Ti-6AL-4V ", 25th Annual International Conference on Mechanical Engineering, May 2017

7

Masoud Barza, Mohsen Khajehzadeh, Majid Kavousi, "Finite Element Simulation and Experimental Study of Ramp Up and Holding Time on Seat Belt Anchorage Test according to ECE R14 and FMVSS 207 ", The Biennial International Conference on Experimental Solid Mechanics, February 2016

8

Masoud Barza, Mohsen Khajehzadeh, "Finite Element Simulation and Experimental Study of Luggage test according to ECE R17 using LS Dyna ", The Biennial International Conference on Experimental Solid Mechanics, February 2016

9

Masoud Barza, Mohsen Khajehzadeh, Mina Beheshti, "Car Seat Design to improve Rear Seat Strength during Seat Belt Anchorage test According to ECE R14 ", The Biennial International Conference on Experimental Solid Mechanics, February 2016

دروس ارائه شده

#

عنوان درس

توصیف درس

سرفصل ها

دوره درسی

1

Design of Experiments & Reliability Evaluation

The present course has been developed with the aim of acquainted with the application of statistical science, statistical analysis and design of experiments in recognition of complex phenomena and processes and examining the significant effect of pro

Spring 2023

2

Design of Component (II)

The goal of the course is to enable students to apply engineering fundamentals to machine component design and to use material properties in the selection of materials for various applications

Spring 2023

3

Computer Aided Engineering (CAE)

Extension the concepts of machine components design from simplified models to complicated structures with complex loading and geometry using commercial finite element packages

Spring 2023

4

Special Topics (Machining and Machine Tools)

The purpose of this course is to give students basic training in the operation of machine tools and metal cutting process. In addition, the students will be trained with the latest developments in conventional machining processes.

Spring 2023

5

Special Topics (Engineering Materials Selection for Design and Manufacturing)

The aim of the course is to familiarize students with how to choose engineering materials, taking into account the limitations of design, construction and economic considerations.

Spring 2023

6

Advanced Mathematics (I)

It is intended to introduce students of mechanical engineering to those areas of applied mathematics that are most relevant for solving practical problems.

Fall 2022

7

Design of Machine Elements (I)

The goal of the course is to enable students to apply engineering fundamentals to machine component design and to use material properties in the selection of materials for various applications

Fall 2022

8

Design of Component (II)

The goal of the course is to enable students to apply engineering fundamentals to machine component design and to use material properties in the selection of materials for various applications

Spring 2022

9

Design of Experiments & Reliability Evaluation

The present course has been developed with the aim of acquainted with the application of statistical science, statistical analysis and design of experiments in recognition of complex phenomena and processes and examining the significant effect of pro

Spring 2022

10

Special Topics (Machining and Machine Tools)

The purpose of this course is to give students basic training in the operation of machine tools and metal cutting process. In addition, the students will be trained with the latest developments in conventional machining processes.

Spring 2022

11

Computer Aided Design

Extension the concepts of machine components design from simplified models to complicated structures with complex loading and geometry using commercial finite element packages

Spring 2022

12

Design of Machine Elements (I)

The goal of the course is to enable students to apply engineering fundamentals to machine component design and to use material properties in the selection of materials for various applications

Fall 2021

13

Advanced Mathematics (I)

It is intended to introduce students of mechanical engineering to those areas of applied mathematics that are most relevant for solving practical problems.

Fall 2021

14

Special Topics (Machining and Machine Tools)

The purpose of this course is to give students basic training in the operation of machine tools and metal cutting process. In addition, the students will be trained with the latest developments in conventional machining processes.

Fall 2021