مجتبی صدیقی - دانشگاه صنعتی امیرکبیر

خدمات ویژه: هیئت علمی دانشجویان دانش آموختگان کارکنان

مطالب پایگاه

اعضای هیات علمی

اینترنت

پست الکترونیک

اتوماسیون اداری و مکاتبات

پورتال آموزشی و پژوهشی

سامانه آموزش الکترونیک

مدیریت یادگیری - دروس حضوری

سامانه ارتقای اساتید(اوج)

سامانه جامع نظام پیشنهادها

سامانه یکپارچه کتابخانه‌ها

سامانه مدیریت یکپارچه آموزش کارکنان

دانشگاه صنعتی امیرکبیر

سامانه رزومه

مجتبی صدیقی

استاد
دانشکده مهندسی مکانیک
گروه آموزشی طراحی جامدات

دریافت با فرمت PDF English

پست الکترونیک:

mojtaba

aut.ac.ir

شماره تماس:

+98-21-64543448

h-index (Scopus):

43.00

ارجاعات (Scopus):

5837

رساله‌های دکتری

عنوان پایان‌نامه

توسط

تاریخ دفاع

تحلیل دو بعدی رفتار استاتیکی، آسیب و تغییر فرم پلاستیک در کامپوزیتهای ذره ای با استفاده از روش پری داینامیک

مرتضی احمدی
استاد راهنمای دیگر: حسین حسینی تودشکی

فروردین 1400

تحلیل دینامیکی پانل ساندویچی با هسته انعطاف پذیر تحت چند ضربه سرعت پایین

محمد کاوسی سیسی و محمود شاکری
استاد راهنمای دیگر:

اسفند 1396

تحلیل عددی و بررسی تجربی رفتار ضربه سرعت پائین فوم آلومینیومی سلول بسته

سعید طالبی

اسفند 1396

تحلیل دینامیکی و ارتعاشی پانل استوانه ای ساندویچ همراه با سیم های SMA تعبیه شده در رویه های ضخیم

مریم خانجانی و محمود شاکری
استاد راهنمای دیگر:

مهر 1396

تحلیل تجربی و عددی تاثیر نانو لایه های لیفی الکتروریسی شده میانی بر خواص ضربه سرعت پایین کامپوزیتهای اپوکسی / آرامید

مصطفی گودرز و سیدهژیر بهرامی
استاد راهنمای دیگر:

شهریور 1396

بررسی چند مقیاسی رفتار فوم های فلزی سلول باز تحت بارگذاری های ایستایی و خستگی پرچرخه

رضا هدایتی
استاد راهنمای دیگر: محمد محمدی اقدم

تیر 1395

تحلیل رفتار تیر ساندیچی با هسته الاستیک -پلاستیک دو خطی و تغییر شکل بزرگ رویه ها تحت بارگذاری استاتیکی

ستار جداری سلامی
استاد راهنمای دیگر: محمود شاکری

آبان 1393

تحلیل رفتار ورق ساندویچی با رویه هایی از جنس چند لایه فلز /الیاف تحت بارگذاری استاتیکی و ضربه سرعت پایین با تغییر شکل های بزرگ

سهیل داریوشی

تیر 1393

تحلیل مساله تماس با وجود ترک در لایه ها با ساختار هدفمند

علی نیک بخت و علیرضا فلاحی آرزودار
استاد راهنمای دیگر:

بهمن 1391

بهینه سازی رفتار سازه های استوانه ای فلزی -مرکب تحت بار محوری شبه استاتیک و ضربه ای با استفاده از روش الگوریتم ژنتیک

مصطفی میرزائی و محمود شاکری
استاد راهنمای دیگر:

آبان 1390

بررسی رفتار الاستیک پانلهای ساندویچی استوانه ای تحت بار عرضی استاتیکی و دینامیکی گذرا

مهدی افشین
استاد راهنمای دیگر: محمود شاکری

تیر 1390

تحلیل تئوری وتجربی پدیده ضربه با سرعت پایین در ورق های ساندویچی

مهدی سعادتی

اسفند 1388

تحلیل تئوری و تجربی خصوصیات مکانیکی کامپوزیتهای تقویت شده با ساختارهای بریدگرد مغزی دار

محمدصالح احمدی و مجید صفرجوهری
استاد راهنمای دیگر:

بهمن 1388

مدلسازی ساختار مشبک هدفمند برای استخوان فمور تحت بار عرضی

علیرضا محمدی

فروردین 1405

پایان‌نامه‌های کارشناسی ارشد

عنوان پایان‌نامه

توسط

تاریخ دفاع

بررسی تجربی تأثیر ارتعاشات فراصوت بر روی ساخت کامپوزیت به روش تزریق رزین در خلأ

پارسا سیدمیرنسب
استاد راهنمای دیگر: امیر عبداله

شهریور 1404

بررسی ریزساختاری رفتارمکانیکی مغز در برابر بارگذاری ضربه

هانیه بادی پا
استاد راهنمای دیگر: محمد محمدی اقدم

شهریور 1404

طراحی و تحلیل فراکاشتنی های سه بعدی پزشکی مورد استفاده در تاندون ها

زهرا قیامی

شهریور 1404

تحلیل رفتارضربه سرعت پایین چندلایه های فلز کامپوزیت تقویت شده با پارچه سه بعدی

امین صفری

شهریور 1404

بررسی رفتار پانل های ساندویچی کروی شکل تحت ضربه سرعت پایین با کاربرد در تحلیل استخوان جمجمه

علیرضا نعمتی جهرمی

شهریور 1404

تحلیل رفتار استخوان تحت ضربه سرعت پایین عرضی

امید غفاری
استاد راهنمای دیگر: طه گودرزی

شهریور 1403

بررسی مقایسه ای رفتار مکانیکی ساختار های پنتامود مانند تحت بار استاتیکی

تینا نوری تبار
استاد راهنمای دیگر: محمد محمدی اقدم

شهریور 1403

استفاده از یک المان جدید برای تحلیل ارتعاشات سازه های ساندویچی با استفاده از قابلیت UEL نرم افزار تجاری آباکوس

مهدی نورزاد

شهریور 1403

تحلیل ضربات تگرگ روی چندلایه های کامپوزیتی و ساندویچی

محمد حقگو
استاد راهنمای دیگر: محمد محمدی اقدم

اردیبهشت 1403

تحلیل رفتار پنل های ساندویچی با هسته آگزتیک تدریجی تحت ضربه سرعت پایین

ملیکا سادات علوی

مهر 1402

تحلیل خواص ویسکوالاستیک زیست مواد با استفاده از سلول های واحد الهام گرفته از مواد زیستی

محمد شکرنیا
استاد راهنمای دیگر: محمد محمدی اقدم

مرداد 1402

مطالعه رفتار سازه های متخلخل آگزتیک تحت بارهای ترمومکانیکی

عرفان عیوض حصاری و محمد محمدی اقدم
استاد راهنمای دیگر:

اردیبهشت 1402

معادل سازی تغییر شکل هسته ورق ساندویچی تحت بارهای استاتیکی و ضربه سرعت پایین با ورق تقویت شده

عبدالباسط لعلی ثانی
استاد راهنمای دیگر: طه گودرزی

فروردین 1402

تحلیل رفتار ترمو الاستیک سازه های متخلخل و سلولی تحت بارگذاری حرارتی-مکانیکی

فاطمه عابدینی و محمد محمدی اقدم
استاد راهنمای دیگر:

مهر 1401

مدلسازی رفتار ترمومکانیکی کامپوزیت ذره ای از جنس آلیاژ حافظه دار در زمینه فلزی با استفاده از روشهای میکرومکانیکی تحت بارگذاری استاتیکی

سیدنوید منصوری
استاد راهنمای دیگر: محمد محمدی اقدم

خرداد 1401

بررسی رفتار الاستو- پلاستیک پانل ساندویچی با در نظر گرفتن اثر قابلیت فشردگی در ماده سلولی هسته

علیرضا پورفرید
استاد راهنمای دیگر: طه گودرزی

آذر 1400

بررسی رفتار ویسکوالاستیک زیست مواد متخلخل

سیدمحسن حسینی و محمد محمدی اقدم
استاد راهنمای دیگر:

فروردین 1400

تحلیل تجربی و عددی ضربه سرعت پایین در کامپوزیت های تقویت شده با الیاف در محیط های خورنده و بهبود آن با نانو ذرات

یاسمن گیتی ارا و سعید صابرسمندری
استاد راهنمای دیگر:

اسفند 1399

بررسی خواص وتحلیل استاتیکی فوم های سلولی با در نظر گرفتن غیر یکنواختی سطح مقطع

هادی فلاحی
استاد راهنمای دیگر: سعید صابرسمندری

اسفند 1399

تعیین حد تسلیم ماده متخلخل با استفاده از یک روش ماکرو-میکرو مکانیکی

غزل السادات شریعت پناهی
استاد راهنمای دیگر: محمد محمدی اقدم

آذر 1399

ساخت، مشخصه یابی و شبیه سازی بیوکامپوزیت پلی متیل متااکریلات - هیدروکسی آپاتیت تقویت شده با نانوذرات گرافن جهت کاربرد در مهندسی پزشکی

عارف بابکی و محمد محمدی اقدم
استاد راهنمای دیگر:

شهریور 1399

تحلیل رفتار افزودنی الاستین بر خواص بیومکانیکی نانوکامپوزیت هیدروکسی آپاتیت/ پلی متیل متااکریلات در مهندسی بافت استخوان تحت ضربه سرعت پایین

متین محمدزاده راد
استاد راهنمای دیگر: محمد محمدی اقدم

شهریور 1399

بررسی افزودن نانولوله کربن(CNT) بر روی خواص مکانیکی بایویی کامپوزیت هیدروکسی آپاتیت و PMMA با کاربرد جایگزین استخوان

محمد عسگری
استاد راهنمای دیگر: سعید صابرسمندری

بهمن 1398

تحلیل عددی و تجربی بارگذاری استاتیکی فوم سلول بسته آلومینیومی با فرض سلول های کلوین و ویرفلان

رضا شکیبانژاد

بهمن 1398

تحلیل دینامیکی استوانه ساخته شده از آلیاژ حافظه دار متخلخل به عنوان یک مستهلک کننده انرژی

محیا حیدری
استاد راهنمای دیگر: محمود شاکری

اسفند 1397

تحلیل وابسته به اندازه ارتعاشات اجباری نانولوله های کربنی انتقال دهنده سیال

محمد معبودی و محمد محمدی اقدم
استاد راهنمای دیگر:

بهمن 1397

مدلسازی و تست وتحلیل رفتار مواد کامپوزیتی با فیبرهای انحنا دار تحت برخورد سرعت بالا

آیشن سلطان سالکی و حمیدرضا اویسی
استاد راهنمای دیگر:

تیر 1397

تحلیل کمانش حرارتی تیر هدفمند تقویت شده با آلیاژ حافظه دار

علیرضا بابائی
استاد راهنمای دیگر: علی نیک بخت

بهمن 1396

تحلیل رفتار ورق کامپوزیتی تقویت شده با نانولوله های کربنی تک جداره تحت ضربه سرعت پایین

محمدعلی مقصودلوراد
استاد راهنمای دیگر: سعید صابرسمندری

بهمن 1396

مدلسازی ریزمقیاسی رفتار مکانیکی استخوان با بهره گیری از تصاویر سی تی اسکن

نعیم قویدل نیا
استاد راهنمای دیگر: محمد محمدی اقدم

بهمن 1396

بررسی تحلیلی و تجربی خواص مکانیکی فوم های سلول باز تحت بارگذاری استاتیکی

ابوالفضل صالحی
استاد راهنمای دیگر: محمد محمدی اقدم

دی 1396

بررسی ضربه سرعت پایین بر روی کامپوزیتی خود ترمیم

حجت نیاکان
استاد راهنمای دیگر: علی نیک بخت

شهریور 1396

شبیه سازی المان محدود برخورد آب به سازه های کامپوزیتی با در نظر گرفتن بر هم کنش سازه و سیال

بابک پناهی کازرونی
استاد راهنمای دیگر: علی نیک بخت

تیر 1396

بررسی تجربی و عددی ورق های ساندویچی با اتصال دو طرفه تحت بارگذاری استاتیکی و ضربه سرعت پائین

شیدخت رشیدداداش

تیر 1396

بررسی رفتار تیر چند لایه کامپوزیتی تقویت شده با نانو فایبرهای پلیمری تولید شده به روش الکتروریسندگی تحت ضربه سرعت پایین

حسام یدملت
استاد راهنمای دیگر: میترا دانش پژوه

بهمن 1395

بررسی تأثیر ساختمان بافت پارچه های دوجداره(حلقوی پودی) بر روی خواص ضربه با سرعت پایین کامپوزیت های تقویت شده با آنها

فاطمه حسنعلی زاده و هادی دبیریان
استاد راهنمای دیگر:

مهر 1395

تاثیر پارامترهای فرآیندی و ریزساختار بر رسانش الکتریکی و ضریب اتلاف دی الکتریک بر نانوکامپوزیت پایه ABS و هیبرید نانوگرافیت/نانو Nife2O4مورد مصرف به عنوان پوشش الکترومغناطیسی

مهشید براتی و علی اصغر کتباب
استاد راهنمای دیگر:

شهریور 1395

تحلیل ورق های کامپوزیتی تقویت شده با فایبر، با یا بدون تقویت نانو ذره تحت ضربه سرعت پایین

احمدرضا شاه محمدی
استاد راهنمای دیگر: منوچهر صالحی

اسفند 1394

بررسی ارتعاشات آزاد پنل های ساندویچی استوانه ای درون سیال

سیما شیروانی آرانی
استاد راهنمای دیگر: میترا دانش پژوه

بهمن 1394

ارزیابی استحکام برشی جوش لبه در جوشکاری اصطکاکی اغتشاشی کامپوزیتهای زمینه آلومینیومی

حجت ثمری خلج و ایرج ستاری فر
استاد راهنمای دیگر:

آبان 1394

بررسی عددی و تجربی رفتار مکانیکی فوم فلزی سلول بسته تحت بارگذاری ضربه

مهرداد کلوشانی
استاد راهنمای دیگر: محمد محمدی اقدم

مهر 1394

بررسی پدیده ی بازگشت فنری در خمکاری ورقهای چند لایه ای فلز کامپوزیت

میلاد حسین پور
استاد راهنمای دیگر: بیژن ملائی داریانی

مهر 1394

تحلیل اعوجاج هندسی در پانلهای چندلایه فلز-الیاف در فرایند پخت

محمد هدایتی نژاد
استاد راهنمای دیگر: محمد محمدی اقدم

شهریور 1394

بررسی انتشار موج تنش در ورق قطاع مرکب چند لایه

محمد مؤیدی و منوچهر صالحی
استاد راهنمای دیگر:

شهریور 1394

تحلیل تئوری و تجربی قانون نفوذ سنبه کروی در ورق های ساندویچی با هسته نرم

حسین روان بخش حبیب آبادی
استاد راهنمای دیگر: محمد محمدی اقدم

بهمن 1393

تحلیل استاتیکی پانل ساندویچی مرکب با الیافی از آلیاژ حافظه دار

سیداحسان علوی
استاد راهنمای دیگر: میترا دانش پژوه

بهمن 1393

روشی جدید برای حل ارتعاشاتی تیرهای ساندویچی تحت شرایط مرزی گوناگون با به کارگیری نظریه ی مرتبه بالای پانل های ساندویچی

سید علی حسینی

آبان 1393

تحلیل تجربی وعددی رفتار ورقهای بتنی تقویت شده با لایه های کامپوزیتی تحت ضربه سرعت بالا

مهدی معین فر
استاد راهنمای دیگر: علیرضا رهائی

مهر 1393

تحلیل مقایسه ای رفتار تیر چندلایه کامپوزیتی با یا بدون تقویت نانوذره تحت ضربه سرعت پایین

مهدی حیدری میبدی
استاد راهنمای دیگر: سعید صابرسمندری

مهر 1393

تحلیل تئوری و تجربی ارتعاشات آزاد و اجباری تیر خمیده ساندویچی حاوی جدایش بین رویه و هسته

ابراهیم صادق پور
استاد راهنمای دیگر: عبدالرضا اوحدی همدانی

مهر 1393

مدل سازی مایکرومکانیکی خرابی لایه میانی الیاف و زمینه درمواد مرکب فلزی تحت بارگذاری خارج از محور

سیدمحمدامین حسینی و محمد محمدی اقدم
استاد راهنمای دیگر:

مهر 1393

تحلیل و شناسایی جدایش پیشرونده در صفحات آلومینیومی ترمیم شده توسط چند لایه ای های فلز الیاف تحت بارگذاریهای استاتیکی داخل یا خارج صفحه

مرتضی احمدی نجف ابادی
استاد راهنمای دیگر: منوچهر صالحی

مهر 1393

(NO TITLE).

یوسف طرازجمشیدی

شهریور 1393

تحلیل رفتار ورق ساندویچی کامپوزیتی با رویه اضافی درون هسته تحت بارگذاری عرضی استاتیکی

وهاب حجاجی

اسفند 1392

تحلیل ارتعاشات ورق ساندویچی حاوی المانهای آلیاژ حافظه دار

محمدحسن صمدپور و محمود شاکری
استاد راهنمای دیگر:

بهمن 1392

تحلیل خمش استاتیکی تیر ساندویچی با فرض رفتار الاستیک-پلاستیک برای هسته آن

محسن رضایی فرد

بهمن 1392

تحلیل تئوری و تجربی ارتعاشات تیر چند لایه ای فلز- کامپوزیت با لایه لایه شدگی اولیه

سیده شهرزاد میرحسینی
استاد راهنمای دیگر: عبدالرضا اوحدی همدانی

بهمن 1392

بررسی رفتار برخورد لمینیت ها و ساندویچ های کامپوزیتی با سر انسان در تصادم خودرو

احد ترکستانی
استاد راهنمای دیگر: منوچهر صالحی

مهر 1392

بررسی تجربی و عددی ضربه مکرر بر روی چندلایه فلز-کامپوزیت

مسعود حقی کاشانی

مهر 1392

تشخیص عیب لایه لایه شدگی اولیه در ورق چند لایه فلز-کامپوزیت با استفاده از موج هدایت شده ی لمب

آمنه مقصودی و عبدالرضا اوحدی همدانی
استاد راهنمای دیگر:

شهریور 1392

تحلیل ارتعاشی تیر ساندویچی با رویه های ساخته شده از مواد هدفمند

رکسانا داورپناه
استاد راهنمای دیگر: محمود شاکری

خرداد 1392

تحلیل کمانش حرارتی ورق قطاع مرکب

بابک گودرزی و منوچهر صالحی
استاد راهنمای دیگر:

اسفند 1391

بررسی مقاومت بالستیکی نمونه های کامپوزیتی ساندویچی با رویه های چند لایه فلز-الیاف

مهران قلمی چوبر

بهمن 1391

بررسی تجربی و عددی ضربه سرعت بالا بر روی چند لایه های فلز / الیاف

حامد زارعی محمودابادی

آبان 1391

تحلیل مسئله تماس با وجود ترک در لایه ها با ساختار هدفمند در دماهای بالا

علی طالع زاده لاری

آبان 1391

تأثیر درجه حرارت پخت بر رشد ترک ناشی از خستگی در صفحات آلومینیومی ترمیم شده توسط چندلایه ای های فلز/ الیاف (GLARE)

علی وجدانی
استاد راهنمای دیگر: حسین حسینی تودشکی

اسفند 1390

بررسی تئوری و تجربی رفتار ضربه سرعت پائین ورق های ساندویچی با هسته ویسکو الاستیک

سروش صادق نژادلیموئی

بهمن 1390

تحلیل پوسته استوانهای کامپوزیتی با ساختار مشبک تحت بارگذاری مرکب شامل نیروی محوری و ممان خمشی

حمید شهسواری

مهر 1390

بهینه سازی ابعاد هندسی لوله های فلزی سری و موازی بعنوان ضربه گیر مکانیکی

سیدابراهیم سیدی و محمود شاکری
استاد راهنمای دیگر:

اردیبهشت 1390

بررسی خواص مکانیکی ساندویچ پانل های ساخته شده از الیاف شیشه سه بعدی (3D glass)

سیداحمد حسینی

اسفند 1389

بهینه سازی ابعاد هندسی و چیدمان لایه های کامپوزیت در لوله های فلزی-کامپوزیتی مربعی (به عنوان ضربه گیر مکانیکی)

حسین اکبرشاهی و محمود شاکری
استاد راهنمای دیگر:

اسفند 1389

بررسی رفتار ورق ساندویچی با لایه واسط در هسته تحت بار ضربه سرعت پایین

وحید تاج الدینی

تیر 1389

تحلیل استاتیکی و ضربه سرعت پایین هسته لانه زنبوری پر شده از فوم

محسن زارعی محمودابادی

بهمن 1388

بررسی رفتار استاتیکی و ارتعاشات آزاد تیر ساندویچی با هسته تراکم پذیرولایه های پیزوالکتریک

هادی کدخدایی

بهمن 1388

بررسی ارتعاشات آزاد وتحریک شده ورق ساندویچی باپوسته های کامپوزیتی وهسته ویسکوالاستیک

فرزاد محمودی

اردیبهشت 1388

رفتار مکانیکی - حرارتی پانلهای ساندویچی با پوسته ها یا هسته های نرم هدفمند (FGM)

محمدحسین بنویدی

بهمن 1387

بهینه سازی چند منظوره ورقهای هدفمند ضخیم

عادل سمیعی زفرقندی

بهمن 1387

تحلیل پوسته استوانه ای FGM با روش المان محدود با استفاده از عملگر و حسگرهای پیزوالکتریک

بشیر بهجت خواجه و منوچهر صالحی
استاد راهنمای دیگر:

شهریور 1387

تحلیل تجربی و المان محدود پوسته مخروطی جدار نازک کامپوزیتی تحت اثر بارگذاری ترکیبی محوری و خمشی

سجاد شقاقی
استاد راهنمای دیگر: محمد محمدی اقدم

شهریور 1387

بررسی تنش های حرارتی ایجاد شده در استوانه های چند لایه ی کامپوزیتی و کاربرد آنها در مخازن CNG

محمدعلی احترام
استاد راهنمای دیگر: حسن بصیرت تبریزی

شهریور 1387

بررسی عددی و تجربی رفتار الاستومرهادر مقابل بار ضربه ای

ستار جداری سلامی و علی صدوق ونینی
استاد راهنمای دیگر:

بهمن 1386

بررسی رفتار تیرهای ساندویچی بارویه های کامپوزیتی تحت بار ضربه ای

حبیب پوریای ولی

دی 1386

بررسی ارتعاشات آزاد تیرهای چندلایه کامپوزیتی و ساندویچی خمیده

فرزاد صدر

آذر 1386

بررسی تئوریک حالات مختلف خرابی برای یک تیر ساندویچی بارویه کامپوزیتی باهسته هانی کمب

اسداله عبدی دهکردی

بهمن 1385

بررسی خواص میرایی ماده در تیر ساندویچی کامپوزیتی بالایه ویسکوالاستیک

هادی آروین بروجنی

آذر 1385

تحلیل تنش در تیر ساندویچی باپوسته های کامپوزیتی تحت بارگذاری استاتیکی

ابراهیم رقاع قهفرخی

آبان 1385

تحلیل اتصالات پیچی قطعات کامپوزیتی و بررسی نوع آسیب در اثر بارهای نوسانی

محمدحسین اسلامی نژاد

مهر 1385

تحلیل و بررسی لایه چینی لایه های کامپوزیتهای ترموپلاستیک برای جلوگیری از چروکیدگی در هنگام شکل دهی عمیق

فرهاد کرمان ساروی

مهر 1385

بررسی رفتار پانلهای ساندویچی باهسته نرم بااستفاده از تئوی مرتبه بالا

فرهاد مرتضوی

بهمن 1384

کتب

عنوان

نگارندگان/مترجمان

کشور ناشر

تاریخ انتشار

نسخه

Wood head Publishing in Mechanical Engineering

رضا هدایتی، مجتبی صدیقی

بریتانیا

سازه های مرکب (مکانیک مواد و طراحی)

مجتبی صدیقی

ایران

مقدمه ای برتئوری ورق

محمود شاکری، مجتبی صدیقی

ایران

مقالات مجلات

M. Mohammadzadeh, A. Babaki, M. Mohammadi Aghdam, S. Saber Samandari, M. Sadighi, "A study on mechanical performance and bioactivity of PMMA-HA-graphene bone cements", Materials Today Communications, vol. 53, no. , pp.1-9, 2026.

O. Ghafari, R. Hedayati, M. Sadighi, T. Goudarzi, "Transverse impacts on long bones: A systematic study", Biomedical Engineering Advances, vol. 10, no. 100200, pp.1-18, 2025.

M. Haghgoo, M. Sadighi, M. Mohammadi Aghdam, "Repeated and multiple hail impacts on honeycomb sandwich panels: An experimental and numerical study", Composite Structures, vol. 360, no. 3, pp.1-23, 2025.

A. Lalisani, M. Sadighi, T. Goudarzi, Rene Alderlisten, "Stiffened composite plates as equivalent structures for sandwich panels under low-velocity hail impact", Mechanics Based Design of Structures and Machines, vol. , no. , pp.1-28, 2025.

Nasim Zarrin, Marjan Abbasi, M. Sadighi, M. Goodarz, "A study on energy dissipation of aramid composite reinforced with a new shear thickening gel (n-STG)PVA polymer matrix", Journal of Composite Materials, vol. 59, no. 1, pp.1-18, 2025.

M. Shokrnia, M. Alavi, M. Sadighi, M. Mohammadi Aghdam, "Viscoelastic Behavior of Cellular Biomaterials Based on Octet-Truss and Tetrahedron Topologies", Materials, vol. 17, no. 23, pp.1-36, 2024.

M. Alavi, Reza Hedayati, M. Sadighi, "Gradient 2D re-entrant cores for sandwich structures under low-velocity impact", Journal of Sandwich Structures and Materials, vol. 26, no. 11, pp.1-34, 2024.

H. Samarikhalaj, A. Nikbakht, M. Sadighi, "Investigating the Effect of SiC Nanoparticles on the Shear Strength of Friction Stir Lap Welded 7075 Aluminum Alloy", Amirkabir Journal of Mechanical Engineering, vol. 56, no. 1, pp.31-56, 2024.

Nasim Zarrin, Marjan Abbasi, M. Sadighi, M. Goodarz, "Energy dissipating of shear thickening gel reinforced with PVA polymer", Polymer Bulletin, vol. 81, no. 13, pp.11893-11910, 2024.

M. Alavi, M. Sadighi, "Effect of Degradation of Polylactic Acid (PLA) on Dynamic Mechanical Response of 3D Printed Lattice Structures", Materials, vol. 17, no. 15, pp.1-27, 2024.

Reza Hedayati, M. Sadighi, E. Gholami, "Design of 2D re-entrant auxetic lattice structures with extreme elastic mechanical properties", Mechanics Based Design of Structures and Machines, vol. 0, no. 0, pp.1-20, 2024.

A. Mohammadi, M. Sadighi, Reza Hedayati, J.f.ganghoffer, "Asymptotic homogenization of tesseract lattice structures", European Journal of Mechanics A-Solids, vol. 107, no. 0, pp.1-25, 2024.

Reza Hedayati, E. Eyvaz Hesari, M. Mohammadi Aghdam, M. Sadighi, "Thermomechanical behavior of auxetic lattices", Journal of Thermal Stresses, vol. 47, no. 8, pp.1073-1094, 2024.

M. Ehsani, N. Sepehry, M. Shamshirsaz, M. Sadighi, "Demodulation-derived damage metrics for nonlinear wave modulation-based health monitoring of structures", Mechanical Systems and Signal Processing, vol. 204, no. 110749, pp.1-18, 2023.

S.E. Alavi, J.f.ganghoffer, H. Reda, M. Sadighi, "Hierarchy of generalized continua issued from micromorphic medium constructed by homogenization", Continuum Mechanics and Thermodynamics, vol. 39, no. 8, pp.1-30, 2023.

M. Sadighi, Rene Alderliesten, Azadeh Fathi, Babak Soltannia, Reza Hedayati, "Delamination link-ups in composite laminates due to multiple hail impacts", Engineering Structures, vol. 294, no. 8, pp.1-13, 2023.

H. Fallahi, M. Sadighi, S. Saber Samandari, "Compressive mechanical properties of open-cell cubic and rhombic dodecahedron lattice structures of variable cross section fabricated by fused deposition modeling", Mechanics of Materials, vol. 184, no. 1, pp.104712-104712, 2023.

F. Abedini, Reza Hedayati, M. Mohammadi Aghdam, M. Sadighi, "Thermomechanical behavior of lattice structures: An analytical, numerical, and experimental study", Mechanics Based Design of Structures and Machines, vol. 51, no. 5, pp.1-24, 2023.

Lubin Huo, Rene Alderliesten, M. Sadighi, "Delamination initiation in fully clamped rectangular CFRP laminates subjected to out-of-plane quasi-static indentation loading", Composite Structures, vol. 303, no. 0, pp.116316-116329, 2023.

M. Ehsani, M. Shamshirsaz, M. Sadighi, Naserodin Sepehry, Richard Loendersloot, "Theoretical and experimental investigations on control parameters of piezo-based vibro-acoustic modulation health monitoring of contact acoustic nonlinearity in a sandwich beam", Applied Acoustics, vol. 203, no. 109193, pp.1-15, 2022.

Chumming Ji, Jiqiang Hu, M. Sadighi, Rene Alderliesten, Bing Wang, "Experimental and theoretical study on residual ultimate strength after impact of CF/PEEK-titanium hybrid laminates with nano-interfacial enhancement", Composites Science and Technology, vol. 232, no. 0, pp.109871-109885, 2022.

M. Ehsani, M. Shamshirsaz, Naserodin Sepehry, M. Sadighi, "Uncertainty quantification in the assessment of the characteristics of the electromechanical impedance spectrum of a rectangular piezoelectric patch", Aut Journal of Mechanical Engineering, vol. 1, no. 1, pp.1-25, 2022.

M. Akbari Beni, M. Sadighi, M.R. Eslami, Yaser Kiani, "Axisymmetric Free Vibration Analysis of Functionally Graded Sandwich Annular Plates: A Quasi-3D Shear and Normal Deformable Model", International Journal of Structural Stability and Dynamics, vol. 0, no. 0, pp.1-25, 2022.

M. Ehsani, M. Shamshirsaz, M. Sadighi, Naserodin Sepehry, Richard Loendersloot, "Three-dimensional scaled boundary fnite element method to simulate Lamb wave health monitoring of homogeneous structures: Experiment and modelling", Ultrasonics, vol. 129, no. 106892, pp.1-11, 2022.

S.E. Alavi, J.f.ganghoffer, M. Sadighi, M. Nasimsobhan, A.h.akbarzadeh, "Continualization method of lattice materials and analysis of size effects revisited based on Cosserat models", International Journal of Solids and Structures, vol. 254-255, no. 0, pp.1-31, 2022.

M. Sadighi, Rene Alderliesten, "Impact fatigue, multiple and repeated low-velocity impacts on FRP composites: A review", Composite Structures, vol. 297, no. 7, pp.1-17, 2022.

M.A. Rahiminia, M. Latifi, M. Sadighi, "Analysis of longitudinal and innovative transversal 3D printed lattice tubular braid textures subjected to internal compression as reinforcement", Journal of Industrial Textiles, vol. 51, no. 1, pp.856-879, 2022.

M.A. Maghsoudlourad, R. Barbazesfahani, S. Saber Samandari, M. Sadighi, "The Response of Gfrp Nanocomposites Reinforced with Functionalized SWCNT under Low Velocity Impact: Experimental and Ls-Dyna Simulation InvestigationsN", Iranian Journal of Materials Science and Engineering, vol. 18, no. 2, pp.1-12, 2022.

Y. Gitiara, R. Barbazesfahani, S. Saber Samandari, M. Sadighi, "Effect of nanoparticles on the improving mechanical behavior of GFRP composites in a corrosive environment", Journal of Nanoanalysis, vol. 9, no. 1, pp.68-82, 2022.

M. Ahmadi, M. Sadighi, H. Hosseini Toudeshky, "Microstructure-based deformation and fracture modeling of particulate reinforced composites with ordinary state-based peridynamic theory", Composite Structures, vol. 279, no. 0, pp.1-10, 2022.

R. Shakibanezhad, M. Sadighi, Reza Hedayati, "Numerical and Experimental Study of Quasi-Static Loading of Aluminum Closed-Cell Foams Using Weaire-Phelan and Kelvin Tessellations", Transport In Porous Media, vol. 142, no. 1, pp.229-248, 2022.

S. Talebi, Reza Hedayati, M. Sadighi, A. Ashoori, "Dynamic thermal buckling of spherical porous shells", Thin-Walled Structures, vol. 172, no. 108737, pp.1-10, 2021.

M. Ahmadi, H. Hosseini Toudeshky, M. Sadighi, "Micro-mechanical damage analysis of Al-Tic particulate reinforced composites by Peridynamic theory", , vol. 53, no. 8, pp.13-23, 2021.

M. Zarei Mahmoudabadi, M. Sadighi, "Out of Punch of Aluminum Hexagonal Honeycomb Using Flat Nose and Spherical Projectiles", , vol. 5, no. 4, pp.1-29, 2021.

M. Ahmadi, Mohamad Fotouhi, H. Hosseini Toudeshky, M. Sadighi, "Damage behavior analysis of Al/TiC particulate composite by acoustic emission monitoring and peridynamic modeling", Composites Part C: Open Access, vol. 6, no. 100206, pp.1-10, 2021.

S.E. Alavi, J.f. Ganghoffer, H. Reda, M. Sadighi, "Construction of micromorphic continua by homogenization based on variational principles", Journal of The Mechanics and Physics of Solids, vol. 153, no. 1, pp.1-38, 2021.

S.E. Alavi, M. Nasimsobhan, J. F. Ganghoffer, A. Sinoimeri, M. Sadighi, "Chiral Cosserat model for architected materials constructed by homogenization", Acta Mechanica, vol. 56, no. 1, pp.2547-2574, 2021.

Y. Gitiara, R. Barbazesfahani, S. Saber Samandari, M. Sadighi, "Low-velocity impact behavior of incorporated GFRP composites with nanoclay and nanosilica in a corrosive environment: Experimental and numerical study", Journal of Composite Materials, vol. 55, no. 27, pp.3989-4010, 2021.

S. Talebi, Reza Hedayati, M. Sadighi, "Dynamic crushing behavior of closed-cell aluminum foams based on different space-filling unit cells", Archives of Civil and Mechanical Engineering, vol. 21, no. 3, pp.1-15, 2021.

N. Sepehry, M. Ehsani, M. Shamshirsaz, M. Sadighi, "Modeling of vibro-acoustic modulation induced by non-linear contact in Euler-Bernoulli beam using the Fourier Spectral Element", Aut Journal of Mechanical Engineering, vol. 1, no. 1, pp.1-19, 2021.

S. Talebi, M. Sadighi, "Simulation of compression behavior of porous structure based on different space-filling unit cells under quasi-static loading", Mechanics Based Design of Structures and Machines, vol. 49, no. 4, pp.1-16, 2021.

M. Ahmadi, M. Sadighi, H. Hosseini Toudeshky, "Computational microstructural model of ordinary state-based Peridynamic theory for damage mechanisms, void nucleation, and propagation in DP600 steel", Engineering Fracture Mechanics, vol. 247, no. 0, pp.1-15, 2021.

M. Mohammadzadeh, S. Saber Samandari, M. Sadighi, Tayebi, M. Mohammadi Aghdam, "Macro-and micromechanical modelling of HA-Elastin scaffold fabricated using freeze drying technique", Journal of Nanoanalysis, vol. 8, no. 1, pp.1-15, 2021.

Reza Hedayati, N. Ghavidelnia, M. Sadighi, Mahdi Bodaghi, "Improving the Accuracy of Analytical Relationships for Mechanical Properties of Permeable Metamaterials", Applied Sciences-Basel, vol. 11, no. 3, pp.1-36, 2021.

P. Manafi, H. Nazokdast, M. Karimi, M. Sadighi, Luca Magagnin, "A study on the microstructural development of gel polymer electrolytes and different imidazolium-based ionic liquids for dye-sensitized solar cells", Journal of Power Sources, vol. 481, no. 1, pp.228622-228622, 2020.

Youseftaraz Jamshidi, Ali Pourkamali Anaraki, M. Sadighi, Javad Kadkhodapour, S.M.H. Mirbagheri, Behnazakhavan, "Metallic closed-cell FFT uniaxial crushing behavior analysis using Voronoi approach", Amirkabir Journal of Mechanical Engineering, vol. 52, no. 8, pp.71-80, 2020.

N. Sepehry, M. Ehsani, M. Shamshirsaz, M. Sadighi, "Online health monitoring of marine structures using electromechanical impedance spectroscopy: A simulation approach", , vol. 10, no. 4, pp.67-76, 2020.

M. Ahmadi, H. Hosseini Toudeshky, M. Sadighi, "Peridynamic micromechanical modeling of plastic deformation and progressive damage prediction in dual-phase materials", Engineering Fracture Mechanics, vol. 235, no. 107179, , 2020.

P. Manafi, H. Nazokdast, M. Karimi, M. Sadighi, Luca Magagnin, "Microstructural Development and Rheological Study of a Nanocomposite Gel Polymer Electrolyte Based on Functionalized Graphene for Dye-Sensitized Solar Cells", Polymers, vol. 12, no. 7, pp.1443-1466, 2020.

N. Sepehry, M. Ehsani, M. Shamshirsaz, M. Sadighi, "Contact acoustic nonlinearity identification via online vibro-acoustic modulation technique", Modares Mechanical Engineering, vol. 20, no. 7, pp.1719-130, 2020.

M.A. Rahiminia, M. Latifi, M. Sadighi, "Elastic behavior of composites reinforced by 3D printed tubular lattice braid textures", Rapid Prototyping Journal, vol. 26, no. 7, pp.1277-1288, 2020.

N. Ghavidelnia, Reza Hedayati, M. Sadighi, M. Mohammadi Aghdam, "Development of porous implants with non-uniform mechanical properties distribution based on CT images", Applied Mathematical Modelling, vol. 83, no. 0, pp.801-823, 2020.

S.E. Alavi, M. Sadighi, M. Danesh Pazhooh, Jean-franois Ganghoffer, "Development of size-dependent consistent couple stress theory of Timoshenko beams", Applied Mathematical Modelling, vol. 79, no. 0, pp.685-712, 2020.

S. Sadeghnejad, Yousef Taraz Jamshidi, M. Sadighi, "On the Low-Velocity Impact and Quasi-Static Indentation Studies of Nomex Honeycomb Composite Sandwich Panels", Aut Journal of Mechanical Engineering, vol. 3, no. 2, pp.243-254, 2019.

Yousef Taraz Jamshidi, Ali Pourkamali Anaraki, M. Sadighi, Javad Kakhodapour, S.M.H. Mirbagheri, Behnaz Akhavan, "Micro-Structure Analysis of Quasi-Static Crushing and Low-Velocity Impact Behavior of Graded Composite Metallic Foam Filled Tube", Metals and Materials International, vol. 0, no. 0, , 2019.

M.A. Maghsoudlourad, R. Barbazesfahani, S. Saber Samandari, M. Sadighi, "Effect of interphase, curvature and agglomeration of SWCNTs on mechanical properties of polymer-based nanocomposites: Experimental and numerical investigations", Composites Part B-Engineering, vol. 175, no. 1, pp.107119-107119, 2019.

M. Goodarz, S. Bahrami, M. Sadighi, S. Saber Samandari, "Low-velocity impact performance of nanofiber-interlayered aramide/ epoxy nanocomposites", Composites Part B-Engineering, vol. 173, no. 1, pp.106975-106975, 2019.

M. Javani, Yaser Kiani, M. Sadighi, M.R. Eslami, "Nonlinear Vibration Behavior of Rapidly Heated Temperature-Dependent FGM Shallow Spherical Shells", Aiaa Journal, vol. 0, no. 0, pp.1-14, 2019.

Bhullar, Ruzgar, Fortunato, Aneja, Orhan, S. Saber Samandari, M. Sadighi, Samad Ahadian, Ramalingam, "A facile method for controlled fabrication of hybrid silver nanoparticle-poly (e-caprolactone) fibrous constructs with antimicrobial properties", Journal of Nanoscience and Nanotechnology, vol. 19, no. 1, pp.6949-6955, 2019.

Reza Hedayati, S.jedari Salami, Y.li, M. Sadighi, A.a.zadpoor, "Semianalytical Geometry-Property Relationships for Some Generalized Classes of Pentamodelike Additively Manufactured Mechanical Metamaterials", Physical Review Applied, vol. 11, no. 3, pp.1-13, 2019.

M. Zarei Mahmoudabadi, M. Sadighi, "Experimental investigation on the energy absorption characteristics of honeycomb sandwich panels under quasi-static punch loading", Aerospace Science and Technology, vol. 88, no. 5, pp.273-286, 2019.

R. Hedayati, M. Sadighi, "LOW-VELOCITY IMPACT BEHAVIOUR OF OPEN-CELL FOAMS", Journal of Theoretical and Applied Mechanics, vol. 56, no. 4, pp.939-949, 2018.

Bhullar, Duygu Ruzgar, S. Saber Samandari, M. Sadighi, Samad Ahadian, Murugan Ramalingam, "Impact of nanophase hydroxyapatite-based biomaterials on tissue engineering", Journal of Bionanoscience, vol. 12, no. 4, pp.469-477, 2018.

S. Talebi, M. Sadighi, M. Mohammadi Aghdam, "Numerical and experimental analysis of the closed-cell aluminium foam under low velocity impact using computerized tomography technique", Acta Mechanica Sinica, vol. 34, no. 6, pp.1-12, 2018.

S. Alimirzaeifaradonbeh, M. Sadighi, A. Nikbakht, "Wave propagation analysis in viscoelastic thick composite plates resting on Visco-Pasternak foundation by means of quasi-3D sinusoidal shear deformation theory", European Journal of Mechanics A-Solids, vol. 74, no. 0, pp.1-15, 2018.

R. Hedayati, H. Hosseini Toudeshky, M. Sadighi, M. Mohammadi Aghdam, Amir A Zadpoor, "Multiscale modeling of fatigue crack propagation in additively manufactured porous biomaterials", International Journal of Fatigue, vol. 113, no. 0, pp.416-427, 2018.

H. Dabiryan, F. Hasanalizade, M. Sadighi, "Low-velocity impact behavior of composites reinforced with weft-knitted spacer glass fabrics", Journal of Industrial Textiles, vol. 0, no. 0, pp.1-19, 2018.

Mehran Ghalami Choobar, Gh. Liaghat, M. Sadighi, Hamed Ahmadi, "Eccentric Low-Velocity Impact on Fiber Metal Laminates under In-Plane Loading Using Unified Zig Zag Theory", Composite Structures, vol. 201, no. 0, pp.315-325, 2018.

F. Hasanalizade, H. Dabiryan, M. Sadighi, "Journal of Science and Technology of Composites", Journal of Sciences and Technology of Composites, vol. 5, no. 1, pp.117-126, 2018.

H. Yademellat, A. Nikbakht, Hamed Saghafi, M. Sadighi, "Experimental and numerical investigation of low velocity impact on electrospun nanofiber modified composite laminates", Composite Structures, vol. 200, no. 0, pp.507-514, 2018.

Mehran Ghalami Choobar, Gh. Liaghat, M. Sadighi, Hamed Ahmadi, Omid Razmkhah, Akbar Abotorabi, "Static analysis of highly anisotropic laminated beam using unified zig-zag theory subjected to mechanical and thermal loading", International Journal of Mechanical Sciences, vol. 141, no. 4, pp.491-501, 2018.

M. Koloushani, R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, "CT-Based Micro-Mechanical Approach to Predict Response of Closed-Cell Porous Biomaterials to Low-Velocity Impact", Journal of Imaging, vol. 4, no. 3, pp.1-15, 2018.

S. Talebi, M. Sadighi, M. Mohammadi Aghdam, "The effect of impact energy parameters on the closed-cell aluminum foam crushing behavior using X-ray tomography method", Aut Journal of Mechanical Engineering, vol. 2, no. 1, pp.107-116, 2018.

A. Babaee, M. Sadighi, A. Nikbakht, S. Alimirzaeifaradonbeh, "Generalized differential quadrature nonlinear buckling analysis of smart SMA/FG laminated beam resting on nonlinear elastic medium under thermal loading", Journal of Thermal Stresses, vol. 41, no. 5, pp.583-607, 2017.

M. Heydari Meybodi, S. Saber Samandari, M. Sadighi, "Experimental dynamic analysis of polymer-based nanocomposite beams under low-velocity impact loading", Iranian Polymer Journal, vol. 26, no. 12, pp.929-940, 2017.

H. Samarikhalaj, A. Nikbakht, M. Sadighi, S. Sheikhan, "Investigating the shear strength of friction stir lap welded 7075 aluminum alloy", , vol. 49, no. 4, pp.863-873, 2017.

S. Talebi, M. Sadighi, M. Mohammadi Aghdam, S.M.H. Mirbagheri, "Micro-macro analysis of closed-aluminum foam with crushing behavior subjected to dynamic loadings", Materials Today Communications, vol. 13, no. 13, pp.170-177, 2017.

H. Zamani, M. Mohammadi Aghdam, M. Sadighi, "Free vibration analysis of thick viscoelastic composite plates on visco-Pasternak foundation using higher-order theory", Composite Structures, vol. 182, no. 0, pp.25-35, 2017.

Soheil Dariushi, M. Sadighi, "Analytical/Empirical Study on Indentation Behavior of Sandwich Plate with Foam Core and Composite Face Sheets", Iranian Journal of Polymer Science and Technology (Ijpst), vol. 30, no. 3, pp.235-245, 2017.

Mehran Ghalami Choobar, Gh. Liaghat, M. Sadighi, Hamed Ahmadi, "Static analysis of transversely anisotropic laminates using improved zig-zag theory subjected to sinusoidal load", , vol. 17, no. 4, pp.393-398, 2017.

S. Sadeghnejad, Y. Taraz Jamshidi, Reza Mirzaeifar, M. Sadighi, "Modeling, characterization and parametric identification of low velocity impact behavior of time-dependent hyper-viscoelastic sandwich panels", Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, vol. 233, no. 4, pp.1-15, 2017.

M. Goodarz, S. Bahrami, M. Sadighi, S. Saber Samandari, "The Influence of Graphene Reinforced Electrospun Nano-Interlayers on Quasi-Static Indentation Behavior of Fiber-Reinforced Epoxy Composites", Fibers and Polymers, vol. 18, no. 2, pp.322-333, 2017.

M. Mohammadi Aghdam, S. R. Morsali, S.M.A. Hosseini, M. Sadighi, "Mechanical Behavior of Unidirectional SiC/Ti Composites subjected to off-axis loading at Elevated Temperatures", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 688, no. 0, pp.244-249, 2017.

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, H. Hosseini Toudeshky, "Comparison of elastic properties of open?cell metallic biomaterials with different unit cell types", Journal of Biomedical Materials Research Part B-Applied Biomaterials, vol. 0, no. 0, pp.1-13, 2017.

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, Zadpoor A. A., "Analytical relationships for the mechanical properties of additively manufactured porous biomaterials based on octahedral unit cells", Applied Mathematical Modelling, vol. 46, no. 0, pp.408-422, 2017.

M.A. Maghsoudlourad, R. Barbazesfahani, S. Saber Samandari, M. Sadighi, "Prediction of elastic modulus of epoxy/single wall carbon nanotube composites by considering interfacial debonding", , vol. 19, no. 1, pp.1371-1379, 2017.

M. Khanjani, M. Shakeri, M. Sadighi, "Nonlinear two dimensional finite element model for transient and damping analysis of cylindrical sandwich panels with pseudoelastic shape memory alloy composite face sheets", Journal of Sandwich Structures and Materials, vol. 0, no. 0, pp.1-58, 2017.

M. Kavousi Sisi, M. Shakeri, M. Sadighi, "Dynamic Analysis of Asynchronous Low-Velocity Impacts on Laminated Composite Plate", , vol. 50, no. 1, pp.47-62, 2017.

H. Ghaedali, S. Sadough Vanini, M. Sadighi, "Experimental and Theoretical evaluation of Bending Behavior of Shape Memory Actuator", , vol. 48, no. 4, pp.355-362, 2016.

M. Goodarz, S. Bahrami, M. Sadighi, S. Saber Samandari, "Quasi-static indentation response of aramid fiber/ epoxy composites containing nylon 66 electrospun nano-interlayers", Journal of Industrial Textiles, vol. 0, no. 0, pp.1-18, 2016.

Ali Talezadehlari, A. Nikbakht, M. Sadighi, H. Yademellat, "Effect of Viscoelastic Interfaces on Thermo-Mechanical Behavior of a Layered Functionally Graded Spherical Vessel", Aut Journal of Mechanical Engineering, vol. 1, no. 1, pp.75-88, 2016.

R. Hedayati, Shahram Janbaz, M. Sadighi, M. Mohammadi Aghdam, Amir Abbas Zadpoor, "How does tissue regeneration influence the mechanical behavior of additively manufactured porous biomaterials?", Journal of The Mechanical Behavior of Biomedical Materials, vol. 65, no. 0, pp.831-841, 2016.

A. Mohammadinasrabadi, R. Hedayati, M. Sadighi, "NUMERICAL AND EXPERIMENTAL STUDY OF MECHANICAL RESPONSE OF ALUMINUM FOAMS UNDER COMPRESSIVE LOADING USING CT DATA", Journal of Theoretical and Applied Mechanics, vol. 54, no. 4, pp.1357-1368, 2016.

Morteza Abouhamzeh, M. Sadighi, "Buckling optimisation of sandwich cylindrical panels", Curved and Layered Structures, vol. 3, no. 1, pp.137-145, 2016.

A. Nikbakht, M. Sadighi, Andrea Zucchelli, "Numerical analysis of frictional contact in the presence of a surface crack in a functionally graded coating substrate system", International Journal of Mechanical Sciences, vol. 117, no. 0, pp.286-298, 2016.

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, Amir Abbas Zadpoor, "Mechanical Properties of Additively Manufactured Thick Honeycombs", Materials, vol. 9, no. 8, pp.613-636, 2016.

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, Amir Abbas Zadpoor, "Mechanical properties of additively manufactured octagonal honeycombs", Materials Science and Engineering C-Materials For Biological Applications, vol. 69, no. 0, pp.1307-1317, 2016.

R. Hedayati, M. Sadighi, "A micromechanical approach to numerical modeling of yielding of open-cell porous structures under compressive loads", Journal of Theoretical and Applied Mechanics, vol. 54, no. 3, pp.769-781, 2016.

100

Mahdi Heydari, S. Saber Samandari, M. Sadighi, "An experimental study on low-velocity impact response of nanocomposite beams reinforced with nanoclay", Composites Science and Technology, vol. 133, no. 1, pp.70-78, 2016.

101

A. Maghsoodi, A. Ohadi Hamadani, M. Sadighi, H. Amindavar, "Damage detection in multilayered fiber-metal laminates using guided-wave phased array", Journal of Mechanical Science and Technology, vol. 30, no. 5, pp.2113-2120, 2016.

102

M. Ahmadi Najafabadi, H. Hosseini Toudeshky, M. Sadighi, "Damage Monitoring of aluminum sheet repaired with fiber metal laminate patch by acoustic emission", , vol. 16, no. 2, pp.1-9, 2016.

103

Mahdi Heidari, S. Saber Samandari, M. Sadighi, "3D multiscale modeling to predict the elastic modulus of polymer/nanoclay composites considering realistic interphase property", Composite Interfaces, vol. 23, no. 7, pp.641-661, 2016.

104

S. Sadeghnejad, Yousef Taraz Jamshidi, M. Sadighi, A. Ohadi Hamadani, "Numerical and Experimental Low-Velocity Impact Behaivor of Sandwich Plates with Viscoelastic Core", Iranian Journal of Polymer Science and Technology (Ijpst), vol. 29, no. 1, pp.55-72, 2016.

105

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, Amir Abbas Zadpoor, "Mechanical properties of regular porous biomaterials made from truncated cube repeating unit cells: Analytical solutions and computational models", Materials Science and Engineering C-Materials For Biological Applications, vol. 60, no. 0, pp.163-183, 2016.

106

E. Sadeghpour, M. Sadighi, A. Ohadi Hamadani, "Free Vibration Analysis of a Debonded Curved Sandwich Beam", European Journal of Mechanics A-Solids, vol. 57, no. 0, pp.71-84, 2016.

107

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, Amir Abbas Zadpoor, "Effect of mass multiple counting on the elastic properties of open-cell regular porous biomaterials", Materials and Design, vol. 89, no. 0, pp.9-20, 2016.

108

M. Khanjani, M. Shakeri, M. Sadighi, "A parametric study on the stress analysis and transient response of thick-laminated-faced cylindrical sandwich panels with transversely flexible core", Aerospace Science and Technology, vol. 48, no. 0, pp.1-20, 2016.

109

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, Amir Abbas Zadpoor, "Mechanics of additively manufactured porous biomaterials based on the rhombicuboctahedron unit cell", Journal of The Mechanical Behavior of Biomedical Materials, vol. 53, no. 0, pp.272-294, 2015.

110

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, Amir Abbas Zadpoor, "Mechanical behavior of additively manufactured porous biomaterials made from truncated cuboctahedron unit cells", International Journal of Mechanical Sciences, vol. 106, no. 0, pp.19-38, 2015.

111

R. Hedayati, H. Hosseini Toudeshky, M. Sadighi, M. Mohammadi Aghdam, Amir Abbas Zadpoor, "Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials", International Journal of Fatigue, vol. 84, no. 0, pp.67-79, 2015.

112

A. Torkestani, M. Sadighi, R. Hedayati, "Effect of material type, stacking sequence and impact location on the pedestrian head injury in collisions", Thin-Walled Structures, vol. 97, no. 0, pp.130-139, 2015.

113

R. Hedayati, M. Sadighi, "Effect of Using an Inner Plate between Two Faces of a Sandwich Structure in Resistance to Bird-Strike Impact", Journal of Aerospace Engineering, vol. 0, no. 0, pp.1-11, 2015.

114

M. Ahmadi Najafabadi, M. Sadighi, M. Salehi, H. Hosseini Toudeshky, "Investigation and monitoring of delamination in FMLs under mode I and II loading with FEM and AE", , vol. 15, no. 9, pp.78-86, 2015.

115

A. Nikbakht, M. Sadighi, "Sliding contact between a rigid cylindrical punch and a functionally graded semi-infinite medium in the presence of a surface crack", , vol. 2, no. 3, pp.11-22, 2015.

116

A. Taherkhani, M. Sadighi, S. Sadough Vanini, M. Zarei Mahmoudabadi, "An experimental study of high-velocity impact on elastic-plastic crushable polyurethane foams", Aerospace Science and Technology, vol. 50, no. 0, pp.245-255, 2015.

117

S. Jedari Salami, S. Dariushi, M. Sadighi, M. Shakeri, "An advanced high-order theory for bending analysis of moderately thick faced sandwich beams", European Journal of Mechanics A-Solids, vol. 56, no. 0, pp.1-11, 2015.

118

M. Khanjani, M. Shakeri, M. Sadighi, "Non-Linear Transient and damping analysis of a long cylindrical sandwich panel with embedded SMA wires", Aerospace Science and Technology, vol. 47, no. 0, pp.98-113, 2015.

119

E. Sadeghpour, Mehdi Afshin, M. Sadighi, "A theoretical investigation on low-velocity impact response of a curved sandwich beam", International Journal of Mechanical Sciences, vol. 101-102, no. 0, pp.21-28, 2015.

120

Mahdi Heidari, S. Saber Samandari, M. Sadighi, "A new approach for prediction of elastic modulus of polymer nanoclay composites by considering interfacial debonding Experimental and numerical investigations", Composites Science and Technology, vol. 117, no. 1, pp.379-385, 2015.

121

M. Kavousi Sisi, M. Shakeri, M. Sadighi, "Dynamic response of composite laminated beams under asynchronous/repeated low-velocity impacts of multiple masses", Composite Structures, vol. 132, no. 0, pp.960-973, 2015.

122

M.R. Bagheri, S. Sadough Vanini, Naser Kordani, M. Sadighi, "The effect of nanoparticles in single-lap composite joints studied by experimental and numerical analyses", Iranian Polymer Journal, vol. 24, no. 8, pp.629-640, 2015.

123

Mahdi Heidari, S. Saber Samandari, M. Sadighi, Mohammad Bagheri, "Low-velocity impact response of a nanocomposite beam using an analytical model", Latin American Journal of Solids and Structures, vol. 12, no. 2, pp.333-354, 2015.

124

S. Jedari Salami, M. Sadighi, M. Shakeri, "Improved high order analysis of sandwich beams by considering a bilinear elasto-plastic behavior of core: An analytical and experimental investigation", International Journal of Mechanical Sciences, vol. 93, no. 0, pp.270-289, 2015.

125

M. Ahmadi Najafabadi, M. Sadighi, M. Salehi, H. Hosseini Toudeshky, "Analysis and detection of failure in aluminium/E-glass prepreg interface with acoustic emission", , vol. 1, no. 1, pp.13-22, 2014.

126

S. Jedari Salami, M. Sadighi, M. Shakeri, "Improved extended high order analysis of sandwich beams with a bilinear core shear behavior", Journal of Sandwich Structures and Materials, vol. 16, no. 6, pp.633-668, 2014.

127

K. Asemi Ahangar, M. Salehi, M. Sadighi, "Three dimensional static and dynamic analysis of two dimensional functionally graded annular sector plates", Structural Engineering and Mechanics, vol. 51, no. 6, pp.1067-1089, 2014.

128

M.H. Samadpour, M. Sadighi, M. Shakeri, "Vibration analysis of thermally buckled SMA hybrid composite sandwich plate", Composite Structures, vol. 119, no. 0, pp.251-263, 2014.

129

A. Nikbakht, A. Fallahi Arezodar, M. Sadighi, "Analyzing contact problem between a functionally graded plate of finite dimensions and a rigid spherical indenter", European Journal of Mechanics A-Solids, vol. 47, no. 0, pp.92-100, 2014.

130

S. Kamarian, M. Sadighi, M. Shakeri, Mh Yas, "Free vibration response of sandwich cylindrical shells with functionally graded material face sheets resting on Pasternak foundation", Journal of Sandwich Structures and Materials, vol. 16, no. 5, pp.511-533, 2014.

131

S. Jedari Salami, M. Sadighi, M. Shakeri, "Geometrically nonlinear extended high order analysis for sandwich beams based on elastic-plastic core shear behavior", Aerospace Science and Technology, vol. 39, no. 0, pp.523-537, 2014.

132

A. Maghsoodi, A. Ohadi Hamadani, M. Sadighi, "Calculation of Wave Dispersion Curves in Multilayered Composite-Metal Plates", Shock and Vibration, vol. 2014, no. 410514, pp.1-6, 2014.

133

S.E. Ghiasian, Y. Kiani Harchegani, M. Sadighi, M.R. Eslami, "Thermal buckling of shear deformable temperature dependent circular annular FGM plates", International Journal of Mechanical Sciences, vol. 81, no. 0, pp.137-148, 2014.

134

S. Dariushi, M. Sadighi, "A new nonlinear high order theory for sandwich beams: An analytical and experimental investigation", Composite Structures, vol. 108, no. 1, pp.779-788, 2014.

135

M. Sadighi, "Investigation of high velocity impact of cylindrical projectile on sandwich panels with fiber-metal laminates skins and polyurethane core", Aerospace Science and Technology, vol. 32, no. 2, pp.142-152, 2014.

136

S. Jedari Salami, M. Sadighi, M. Shakeri, M. Moeinfar, "An Investigation on Low Velocity Impact Response of Multilayer Sandwich Composite Structures", Scientific World Journal, vol. 2013, no. 175090, pp.1-9, 2013.

137

M. Sadighi, "Numerical analysis of the fracture parameters in the sliding contact problem between a rigid flat punch and a FG semi-infinite medium in the presence of a surface crack", , vol. 13, no. 12, pp.14-24, 2013.

138

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, "On the difference of pressure readings from the numerical, experimental and theoretical results in different bird strike studies", Aerospace Science and Technology, vol. 0, no. 0, , 2013.

139

K. Asemi Ahangar, S. Jedari Salami, M. Salehi, M. Sadighi, "Dynamic and Static analysis of FGM Skew plates with 3D Elasticity based Graded Finite element Modeling", Latin American Journal of Solids and Structures, vol. 11, no. 1, pp.504-533, 2013.

140

M. Haghi Kashani, M. Sadighi, M. Mohammad Khah, Hamid Shahsavari Alvije, "Investigation of scaling effects on fiber metal laminates under tensile and flexural loading", Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, vol. 0, no. 0, pp.1-13, 2013.

141

Y. Kiani Harchegani, M. Sadighi, M.R. Eslami, "Dynamic analysis and active control of smart doubly curved FGM panels", Composite Structures, vol. 102, no. 0, pp.205-216, 2013.

142

R. Tavana, S. Shaikhzadeh Najar, M Tahaye Abadi, M. Sadighi, "Meso/macro-scale finite element model for forming process of woven fabric reinforcements", Journal of Composite Materials, vol. 47, no. 17, pp.2075-2085, 2013.

143

E. Sadeghpour, M. Sadighi, S. Dariushi, "An investigation on blunt notch behavior of fiber metal laminate containing notch with different shapes", Journal of Reinforced Plastics and Composites, vol. 32, no. 15, pp.1143-1152, 2013.

144

Y. Kiani Harchegani, M. Sadighi, S. Jedari Salami, M.R. Eslami, "Low velocity impact response of thick FGM beams with general boundary conditions in thermal field", Composite Structures, vol. 104, no. 0, pp.293-303, 2013.

145

H. Hosseini Toudeshky, M. Sadighi, A. Vojdani, "Effects of curing thermal residual stresses on fatigue crack propagation of aluminum plates repaired by FML patches", Composite Structures, vol. 100, no. 0, pp.154-162, 2013.

146

A. Nikbakht, M. Sadighi, A. Fallahi Arezodar, Andrea Zucchelli, "Elastic-plastic frictionless indentation analysis of a functionally graded vitreous enameled steel plate by a rigid spherical indenter", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 564, no. 0, pp.242-254, 2013.

147

S. Dariushi, M. Sadighi, "A Study on Flexural Properties of Sandwich Structures with Fiber/Metal Laminate Face Sheets", Applied Composite Materials, vol. 0, no. 0, pp.1-17, 2013.

148

Freddy Moriniere, R.c.alderliesten, M. Sadighi, R.bebedictus, "An integrated study on the low-velocity impact response of the GLARE fibre-metal laminate", Composite Structures, vol. 100, no. 1, pp.89-103, 2013.

149

H. Samareh Salavati Pour, M. Sadighi, A. Kami, "Optimization of the Composite Truncated Cone Structure Layers under Buckling Load", Applied Mechanics and Materials, vol. 225, no. 0, pp.144-149, 2012.

150

M. Sadighi, S. Jedari Salami, "An investigation on low-velocity impact response of elastomeric & crushable foams", Central European Journal of Engineering, vol. 2, no. 4, pp.627-637, 2012.

151

M. Mirzaei, H. Akbarshahi, M. Shakeri, M. Sadighi, "Multidisciplinary Optimization of Collapsible Cylindrical Energy Absorbers under Axial Impact Load", Structural Engineering and Mechanics, vol. 44, no. 3, pp.325-337, 2012.

152

H. Moradi, F. Bakhtiari Nejad, M. Sadighi, "Suppression of Bending Vibration of Drill-Strings via an Adjustable Vibration Absorber", International Journal of Acoustics and Vibration, vol. 17, no. 3, pp.155-163, 2012.

153

A. Nikbakht, A. Fallahi Arezodar, M. Sadighi, Andrea Zucchelli, "Frictionless elastic contact analysis of a functionally graded vitreous enameled low carbon steel plate and a rigid spherical indenter", Composite Structures, vol. 0, no. 0, , 2012.

154

M. Sadighi, R.c.alderliesten, R.bebedictus, "Impact resistance of fiber-metal laminates: A review", International Journal of Impact Engineering, vol. 49, no. 7, pp.77-90, 2012.

155

Mohammad Hossein Pol, Golamhossein Liaghat, M. Sadighi, "Analytical modeling of perforation of projectiles into glass/expoxy composites", , vol. 12, no. 2, pp.11-19, 2012.

156

A. Nikbakht, M. Sadighi, A. Fallahi Arezodar, "Indentation of a transversely loaded functionally graded rectangular plate by a rigid spherical indentor", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 0, no. 0, , 2012.

157

H. Shahsavari, S. Sadeghnejad, M. Sadighi, "Parametric Study of Specific Buckling Load of Cylindrical Grid Stiffened Composite Shells", Advanced Science Letters, vol. 13, no. 1, pp.482-485, 2012.

158

M. Sadighi, T. Parnanen, R.c.alderliesten, , R.benedictus, "Experimental and Numerical Investigation of Metal Type and Thickness Effects on the Impact Resistance of Fiber Metal Laminates", Applied Composite Materials, vol. 19, no. 4, pp.545-559, 2012.

159

Mostafa Mirzaei, M. Shakeri, M. Sadighi, H. Akbarshahi, "Experimental and analytical assessment of axial crushing of circular hybrid tubes under quasi-static load", Composite Structures, vol. 94, no. 6, pp.1959-1966, 2012.

160

J. Soltani Rad, A. Tivay, M. Sadighi, "Free vibration analysis of FGM sandwich beams containing edge cracks", Advanced Materials Research, vol. 488-489, no. 1, pp.230-235, 2012.

161

M. Zarei Mahmoudabadi, M. Sadighi, "A study on the static and dynamic loading of the foam filled metal hexagonal honeycomb- Theoretical and experimental", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 530, no. 12, pp.333-343, 2011.

162

M. Mirzaee, M. Shakeri, M. Sadighi, H. Akbarshahi, "Crashworthiness Design for Cylindrical Tube using Neural Network and Genetic Algorithm", Procedia Engineering, vol. 14, no. 0, pp.3346-3353, 2011.

163

B. Behjat Khajeh, M. Salehi, A. Armin, M. Sadighi, M. Abbasi, "Static and dynamic analysis of functionally graded piezoelectric plates under mechanical and electrical loading", Scientia Iranica, vol. 18, no. 4, pp.986-994, 2011.

164

M. Sadighi, M. Benavidi, M.R. Eslami, "Improvement of thermo-mechanical properties of transversely flexible sandwich panels by functionally graded skins", Journal of Sandwich Structures and Materials, vol. 13, no. 5, pp.539-577, 2011.

165

M. Saadati, M. Sadighi, "Indentation law for lightweight sandwich plates", Proceedings of The Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering, vol. 225, no. 8, pp.915-928, 2011.

166

M. Zarei Mahmoodabadi, M. Sadighi, "A theoretical and experimental study on metal hexagonal honeycomb crushing under quasi-static and low velocity impact loading", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 528, no. 15, pp.4958-4966, 2011.

167

H. Moradi, M. Sadighi, F. Bakhtiari Nejad, "Optimum design of a tuneable vibration absorber with variable position to suppress vibration of a cantilever plate", International Journal of Acoustics & Vibration, vol. 16, no. 2, pp.55-63, 2011.

168

M. Sadighi, A. Ohadi Hamadani, "Free Vibration Analysis of Composite Sandwich plate with Viscoelastic Core", Key Engineering Materials, vol. 471-472, no. 0, pp.658-663, 2011.

169

M. Sabzikarboroujerdy, S. Dariushi, M. Sadighi, "Fiber Metal Laminates under Low Velocity Impact: An Experimental/ Analytical Approach", , vol. 24, no. 1, pp.69-78, 2011.

170

M. Sadighi, M. Zarei Mahmoodabadi, Ali Karamnejad, "A quasi-static and low-velocity impact crushing investigation on a metal square tube", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 225, no. 4, pp.771-779, 2011.

171

V. Tajeddini, A. Ohadi Hamadani, M. Sadighi, "Three-dimensional free vibration of variable thickness thick circular and annular isotropic and functionally graded plates on Pasternak foundation", International Journal of Mechanical Sciences, vol. 53, no. 4, pp.300-308, 2011.

172

M.merzaei, M. Shakeri, M. Sadighi, "Multi-objective Optimization of Crashworthiness of Cylindrical Tubes as Energy Absorbers", Iranian Journal of Mechanical Engineering, vol. 12, no. 1, pp.5-17, 2011.

173

M. Ehteram, M. Sadighi, H. Basirat Tabrizi, "Analytical solution for thermal stresses of laminated hollow cylinders under transient nonuniform loading", Mechanika, vol. 17, no. 1, pp.30-37, 2011.

174

M. Sadighi, A. Ohadi Hamadani, "Free Vibration Analysis of Composite Sandwich Plate with Viscoelastic Core", Key Engineering Materials, vol. 471-472, no. 0, pp.658-663, 2011.

175

H. Akbarshahi, M. Sadighi, M. Shakeri, M. Mirzaee, "Mathematical Model for Axial Crushing of Hybrid Square Tubes", Key Engineering Materials, vol. 471-472, no. 0, pp.664-669, 2011.

176

S. Sadeghnejad, M. Sadighi, A. Ohadi Hamadani, "Free vibration analysis of composite sandwich plate with viscoelastic core", Key Engineering Materials, vol. 471, no. 1, pp.658-663, 2011.

177

A.H. Akbarzadeh Shafaroudi, S.K. Hosseini Zad, M.R. Eslami, M. Sadighi, "Mechanical behaviour of functionally graded plates under static and dynamic loading", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 225, no. 2, pp.326-333, 2011.

178

M. Afshin, M. Sadighi, M. Shakeri, "Free-Edge Effects in a Cylindrical Sandwich Panel with a Flexible Core and Laminated Composite Face Sheets", Mechanics of Composite Materials, vol. 46, no. 5, , 2010.

179

M. Sadighi, M. Saadati, "Non-linear indentation law for lightweight sandwich beam", Proceedings of The Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering, vol. 224, no. 11, , 2010.

180

M. Morovvati, A. Fatemi, M. Sadighi, "Experimental and finite element investigation on wrinkling of circular single layer and two-layer sheet metals in deep drawing process", International Journal of Advanced Manufacturing Technology, vol. 0, no. 0, , 2010.

181

M. Afshin, M. Sadighi, M. Shakeri, "Vibration and damping analysis of cylindrical sandwich panels containing a viscoelastic flexible core", Journal of Sandwich Structures and Materials, vol. 0, no. 0, , 2010.

182

M. Afshin, M. Sadighi, M. Shakeri, "Static Analysis of Cylindrical Sandwich Panels with a Flexible Core and Laminated Composite Face Sheets", Journal of Composite Materials, vol. 44, no. 12, pp.1455-1476, 2010.

183

S.ebrahim Moussavi Torshizi, S. Dariushi, M. Sadighi, Pedram Safarpour, "A Study on Tensile Properties of a Novel Fiber/Metal Laminates", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 527, no. 0, pp.4920-4925, 2010.

184

M. Sadighi, M. Saadati, "Unequal Faces Effect on Fracture of Composite Sandwich Beam with Flexible Core", Applied Composite Materials, vol. 17, no. 2, , 2010.

185

M. Sadighi, A.A. Abdi Dehkordy, R. Khodam Bashi Emami, "A Theoretical and Experimental Study of Failure Maps of Sandwich Beams with Composite Skins and Honeycomb Core", Amirkabir International Journal of Modeling, Identification,Simulation & Control, vol. 42, no. 1, pp.37-47, 2010.

186

Gholam Hossein Liaghat, Ali Alavi Nia, M. Sadighi, H.R. Daghyani, "Ballistic limit evaluation for impact of cylindrical projectiles on honeycomb panels", Thin-Walled Structures, vol. 48, no. 1, pp.55-61, 2010.

187

H. Arvin Boroujeni, M. Sadighi, A. Ohadi Hamadani, "A numerical study of free and forced vibration of composite sandwich beam with viscoelastic core", Composite Structures, vol. , no. 92, , 2010.

188

Gholam Hossein Liaghat, H.R. Daghyani، علی علوی نیا, M. Sadighi, "Ballistic Limit Evaluation for Impact of Cylindrical Projectiles on Honeycomb Panels", Thin-Walled Structures, vol. 48, no. 8, pp.55-61, 2010.

189

M.S. Ahmadi, M. Safar Johari, M. Sadighi, "An experimental study on mechanical properties of GFRP braid-pultruded composite rods", Express Polymer Letters, vol. 0, no. 9, , 2009.

190

M. Saadati, M. Sadighi, "Indentation in lightweight composite sandwich beams", Proceedings of The Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering, vol. , no. 223, , 2009.

191

B. Behjat Khajeh, M. Salehi, M. Sadighi, A. Armin, M. Abbasi, "Static, Dynamic, and Free Vibration Analysis of Functionally Graded Piezoelectric Panels Using Finite Element Method", Journal of Intelligent Material Systems and Structures, vol. 20, no. 0, , 2009.

192

193

M. Saadati, M. Sadighi, "a damage investigation of a lightweight composite sandwich beam under concentrated loading", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. , no. 223, , 2009.

194

M. Sadighi, M. Tajdari, "An Investigation on Tensile Properties of Glass Fiber/Aluminium Laminates", , vol. , no. 22, , 2009.

195

R. Mirzaeifar, M. Shakeri, M. Sadighi, "Nonlinear Finite Element Formulation for Analyzing Shape Memory Alloy Cylindrical Panels", , vol. , no. 18, , 2009.

196

M. Sadighi, "An Experimental Study of The Fibre Orientation and Iaminate Sequencing Effects on Mechanical Properties of Glare", Proceedings of The Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering, vol. , no. 222, , 2008.

197

M. Sadighi, "Quasi-Static and Low-Velocity Impact Response of Fully Backed or Simply Supported Sandwich Beams", Journal of Sandwich Structures and Materials, vol. , no. 1, , 2008.

198

M. Sadighi, E. Rabizadeh, F. Kerman Saravi, "Effects of laminate sequencing on thermoforming of thermoplastic matrix composites", Journal of Materials Processing Technology, vol. , no. 201, , 2008.

199

M. Sadighi, "A Study of Indentation Energy in Three Points Bending of Sandwich Beams With Composite Laminated Faces and Foam Core", , vol. , no. 26, , 2007.

200

M. Sadighi, "Response of Fully Backed Sandwich Beams to Low Velocity Transverse Impact", , vol. , no. 26, , 2007.

201

M. Sadighi, "prediction of low -velocity impact damage in laminated composites", , vol. 0, no. 0, , 2005.

202

جمال زمانی, , M. Sadighi, H.R. Daghyani, "Introducing a New Folding Mechanism Determining Crushing Strength of Honeycomb", , vol. 14, no. 55, pp.734-754, 2003.

203

J. Zamani, G.liaghat, M. Sadighi, H.R. Daghyani, "Introducing a New Folding Mechanism Determining Crushing Strength of Honeycomb", , vol. 14, no. 55, pp.734-745, 2003.

204

H. Daghyani, M. Sadighi, "Dynamic crushing of honecomb panels under impact of cylindrical projectiles", , vol. 0, no. 53, , 2003.

مقالات همایش‌ها

M. Alavi, M. Sadighi, Reza Hedayati, "Impact response of gradient auxetic sandwich structures,", The 32nd annual international conference of the Iranian Society of Mechanical Engineers, May 2024.

A. Lalisani, M. Sadighi, T. Goudarzi, Reza Hedayati, "Optimized Stiffened Plates as Equivalent Structures for Sandwich Panels Under Ice Impact,", The 31th Annual International Conference of Iranian Society of Mechanical Engineers & 9th Conference on Thermal Power Plants, May 2023.

S.N. Mansouri, M. Sadighi, M.H. Benvidi, M. Mohammadi Aghdam, "Thermomechanical Modeling of Particulate Composites made of Shape Memory Alloys (SMA) Inclusions in Metal Matrix using Micromechanical Approaches under Static Loading,", Iranian Journal of Mechanical Engineering Transactions of ISME, May 2022.

M. Goodarz, S. Bahrami, M. Sadighi, "Behavior of graphene/nylon nanofiber interleaved nanocomposites subjected to low-velocity impact,", 12th Iranian national textile engineering conference, Jun 2021.

H. Fallahi, M. Sadighi, S. Saber Samandari, "Mechanical properties analysis of cellular foams with non uniform cross section by numerical and experimental methods,", 3rd International Conference on Mechanical, Electrical And Computering Engineering, Feb 2021.

H. Fallahi, M. Sadighi, S. Saber Samandari, "Effect of the non uniform cross section on mechanical properties of cellular foams by numerical method,", 3rd International Conference on Mechanical, Electrical And Computering Engineering, Feb 2021.

A. Soltansaleki, H.R. Ovesy, M. Sadighi, Kharazi, M, "Numerical modelling, experimental and analytical study of variable tow-steered composites subjected to high velocity impact,", The 18th International Conference of Iranian Aerospace Society, Feb 2020.

R. Shakibanezhad, M. Sadighi, "Overview of Metal Foam Production Method with Emphasis on Alpuras Aluminum Foam Production Process,", First international Conference Development of Materials Engineering Technology, Mining and Geology, Dec 2019.

R. Shakibanezhad, M. Sadighi, "Numerical analysis of the compressive strength of porous cell foam and comparison with experimental results,", First international Conference Development of Materials Engineering Technology, Mining and Geology, Dec 2019.

M. Akbari Beni, M. Sadighi, M.R. Eslami, "Free Vibration of Functionally Graded Carbon Nanotube Reinforced Composite Lvy Conical Panels,", 27th Annual International conference of Iranian Society of Mechanical Engineering (ISME 2019), Apr 2019.

M.A. Maghsoudlourad, R. Barbazesfahani, S. Saber Samandari, M. Sadighi, "Prediction of the Youngs modulus of SWCNTs/epoxy nanocomposites by considering SWCNTs curvature and local agglomeration,", :The 6th International Conference on Composites(Characterization, Fabrication and Application (CCFA-6, Dec 2018.

S. Mirhosseini, Y. Haghighatfar, M. Sadighi, "Forced vibration of a fiber metal laminated beam containg a delamination,", ICAMMSE 2018:, May 2018.

M. Goodarz, S. Bahrami, M. Sadighi, S. Saber Samandari, "An experimental study on quasi-static indentation response of laminated composites interlayered with electrospun nanofibers,", Proceedings of the 7th International Conference on Nanostructures, Feb 2018.

F. Hasan Alizadeh, H. Dabiryan, M. Sadighi, "Low-velocity impact behavior of weft-knitting spacer fabric reinforced composites based on energy absorption,", AUTEX2017 | International Textiles Conference, May 2017.

A. Babaee, Ali Talezadeh Lari, A. Nikbakht, M. Sadighi, "Numerical Investigation on Thermal buckling of Composite Laminate Using GDQ and Ritz Method,", 25th Annual International Conference on Mechanical Engineering, May 2017.

F. Hasanalizade, H. Dabiryan, M. Sadighi, "Low-velocity impact behaviour of weft-knitted spacer fabrics reinforced composites based on energy absorption,", AUTEX2017, May 2017.

A. Torkestani, M. Sadighi, R. Hedayati, "Effect of foam core on pedestrian head injury in a head-hood collision,", 2014(CCFA-4), Dec 2016.

A. Shahmohamadi, M. Salehi, M. Sadighi, S. Saber Samandari, "Improving mechanical properties of composites by nanoparticles using a three dimensional model,", 40th Solid Mechanics Conference, Aug 2016.

M. Goodarz, S. Bahrami, M. Sadighi, "Evaluating the effect of nanolayers on semi static compression loads on Epoxy/Aramide composites,", 10th Iranian National Textile conference, Apr 2016.

M. Kavousi Sisi, M. Shakeri, M. Sadighi, "Dynamic Response of Composite Laminated Beams Under Asynchronous Low-Velocity Impacts,", Second International Conference on Composites, Biocomposites and Nanocomposites, Oct 2015.

M. Shakeri, M. Sadighi, M. Khanjani, "A parametric Study on the Static and Dynamic Response of Long Sandwich Cylindrical Panels with Transversely Flexible Core,", Second International Conference on Composites, Biocomposites and Nanocomposites, Oct 2015.

Ali Talezadeh Lari, A. Nikbakht, M. Sadighi, "Thermal behavior of SMA/FGM actuators with temperature dependent properties,", Third Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR 2015), Sep 2015.

M. Koloushani, M. Sadighi, M. Mohammadi Aghdam, R. Hedayati, "Survey parameters affecting the mechanical behavior of metallic open cell foam under quasi static and dynamic pressure loading,", The first annual national conference in mechanical engineering and industrial solutions, Aug 2015.

M. Khanjani, M. Shakeri, M. Sadighi, "Higher-order Stress Analysis of Cylindrical Sandwich Panels with Transversely Flexible Core,", 2nd International Conference on Electrical, Computer, Mechanical and Mechatronics Engineering, Aug 2015.

R. Hedayati, M. Sadighi, "Compressive crushing behavior of open-cell biomaterials,", (ICMEMS2015), May 2015.

R. Hedayati, M. Sadighi, M. Mohammadi Aghdam, "Effect of porosity on the static and impact response of titanium in implants used inside femur bone,", (ISME 2015), May 2015.

M. Ahmadi Najafabadi, M. Sadighi, M. Salehi, H. Hosseini Toudeshky, "Debonding Identification of aluminum/composite interface in FMLs,", 4th International Conference on Acoustics and Vibration, Dec 2014.

M. Zarei Mahmoudabadi, A. Taherkhani, M. Sadighi, "Experimental Study of Repeated Loading on Elastomeric Foam Cores,", The 4th International Conference on Composites:Characterization, Fabrication and Application (CCFA-4), Dec 2014.

M. Heydari Meybodi, S. Saber Samandari, M. Sadighi, "A study on nanocomposite beam response under low-velocity impact based on an analytical model,", The 4th International Conference on Composites: Characterization, Fabrication and Application, Dec 2014.

M. Heydari Meybodi, S. Saber Samandari, M. Sadighi, "3D finite element modeling of Youngs modulus of nanoclay/polymer composites,", The 4th International Conference on Composites: Characterization, Fabrication and Application, Dec 2014.

A. Taherkhani, M. Zarei Mahmoudabadi, M. Sadighi, "Investigation on Sandwich Plates with Discontinuous Flexural Cores,", The 4th International Conference on Composites:Characterization, Fabrication and Application (CCFA-4), Dec 2014.

Y. Taraz Jamshidi, S. Sadeghnejad, M. Sadighi, "Static and Dynamic Study of Sandwich Panels with Composite Skins and Nomex Honeycomb Core,", The 22nd Annual International Conference on Mechanical Engineering-ISME2014, Apr 2014.

M.H. Samadpour, M. Sadighi, M. Shakeri, "ّForced vibration of sandwich beam embedded with SMA wires: High order approach,", International Conference on Mechanical Engineering, Apr 2014.

H. Ravanbakhsh Habibabadi, M. Mohammadi Aghdam, H. Niknamjahromi, M. Sadighi, "Numerical Analysis of Indentation in Sandwich Beams Based on Higher Order Theory; Differential Quadrature Method,", The 22nd Annual International Conference on Mechanical Engineering - ISME2014, Apr 2014.

H. Ravanbakhsh Habibabadi, M. Sadighi, Mahdi Saadati, M. Mohammadi Aghdam, "Failure Mode Map for Foam Core Sandwich Panel with Composite Faces under Static Local Loading,", The 22nd Annual International Conference on Mechanical Engineering - ISME2014, Apr 2014.

A. Taherkhani, M. Zarei Mahmoudabadi, S. Sadough Vanini, M. Sadighi, "High velocity impact behavior of elastomeric foams,", ISME2014, Apr 2014.

R. Naseri, M. Sadighi, "Numerical analysis of sandwich beam failure behavior under temperature gradient,", International Conference on Mechanical Engineering, Apr 2014.

M. Sadighi, M. Rezaei Fard, "Effect of boundary conditions on the high order behavior of a sandwich beam with an elastic-plastic bilinear core,", 22nd Annual International Conference on Mechanical Engineearing, Apr 2014.

A. Kami, H. Samareh Salavati Pour, M. Sadighi, "Stacking sequence optimization of composite cone using neural network and genetic algorithm,", 22nd Annual International Conference on Mechanical Engineering., Apr 2014.

E. Sadeghpour, Mehdi Afshin, M. Sadighi, "Low-Velocity Impact Modeling of a Sandwich Beam Using Extended Higher Order Sandwich Panels Theory,", The 22nd Annual International Conference on Mechanical Engineering, Apr 2014.

E. Sadeghpour, M. Sadighi, A. Ohadi Hamadani, "Free vibration analysis of a debonded sandwich beam using extendec higher order sandwich panels theory,", The 22nd Annual International Conference on Mechanical Engineering, Apr 2014.

A. Hossainzadeh, P. Samadof, H. Sajedi, H. Samareh Salavati Pour, Y. Alizadeh Vaghasloo, M. Sadighi, "Statically analyzes of composite spherical sector made by VARTM method and its comparison with hand lay-up,", 13th Conference of Iranian Aerospace Society, Mar 2014.

R. Hedayati, M. Sadighi, "Finite element investigation of mechanical behavior of rhombic dodecahedron micro-structures under static loading,", ICMEMS 2014, Feb 2014.

R. Hedayati, M. Sadighi, "Investigation of damage propagation in open-cell foams under static loading,", The 1st international conference on MEMS and Microfabrication (ICMEMS 2014), Feb 2014.

S. Sadeghnejad, M. Sadighi, "Theoretical and Experimental Static Behavior of Sandwich Structures with Viscoelastic Core,", The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2014), Feb 2014.

S.S. Mirhosseini, M. Sadighi, A. Ohadi Hamadani, "Transverse Vibration of Composite Beams with Two Non-Overlapping Delaminations using DTM,", 3th International Conference on Acoustics and Vibration, Dec 2013.

Mohammad Jafarpour Alamdari, A. Taherkhani, R. Hedayati, M. Sadighi, S. Sadough Vanini, "Numerical investigation of energy absorption capacity of metallic foam-filled tubes,", (ICMEM13), Aug 2013.

M. Jafarpoor Alamdari, A. Taherkhani, R. Hedayati, M. Sadighi, S. Sadough Vanini, "Numerical Investigation on Energy Absorption Capacity of Metallic Foam-Filled Tubes,", 2nd International Conference on Mechanical Engineering and MechatronicsToronto, Ontario, Canada, August 8-9 2013, Aug 2013.

R. Hedayati, M. Sadighi, "Theoretical Study of Bird Strike against Rigid Surfaces,", 21st Annual InternationalConference on Mechanical Engineering (ISME2013), May 2013.

R. Hedayati, M. Sadighi, "Cost Optimization of Elastic Energy Absorbers in Car Bumper for Impact Application using Kuhn-Tucker, SLP, CSD and PLBA algorithms,", 21st Annual International Conference on Mechanical Engineering, May 2013.

M. Haghi Kashani, M. Sadighi, H. Shahsavari, H. Akbarshahi, "Square Grid-Stiffened Composite Plate under Flexural Loading,", 21st Annual International Conference on Mechanical Engineering-ISME2013, May 2013.

F. Rasouli, M. Sadighi, M. Zarei Mahmoudabadi, "Theoretical and experimental investigation of square tubes filled by foam under quasi-static loading,", ISME2013, May 2013.

M.s.ahmadi, M. Safar Johari, M. Sadighi, "A theoretical study on the effect of waviness in the braided reinforcement on elastic modulus of its composite,", National conference on mechanical engineering, May 2013.

M.s.ahmadi, M. Safar Johari, M. Sadighi, "Prediction of longitudinal elastic modulus of braid-pultruded composite rods,", National conference on mechanical engineering, May 2013.

M.s.ahmadi, M. Safar Johari, M. Sadighi, "Experimental study of mechanical properties of glass/polyester pultruded braid composite rods,", National conference on mechanical engineering, May 2013.

, M. Sadighi, "Contact force estimation of viscoelastic sandwich structures under low velocity impact, using artificial neural network (ANN,", The 3rd international conference on composites: characterization,fabrication and application (CCFA-3), Dec 2012.

M.mirzaei, H. Akbarshahi, M. Shakeri, M. Sadighi, "A new approach to the experimental investigation of axial crushing of circular hybrid tubes quasi-static loading,", The 3rd international conference on composites: characterization,fabrication and application (CCFA-3), Dec 2012.

M.sheikhman, , M. Sadighi, A.s.jafari, "Experimental analysis of high velocity impact on free vibration of sandwich structures with skins of fiber metal laminates,", Second International Conference on Acoustics and Vibration, Dec 2012.

S. Jedari Salami, M. Sadighi, M. Shakeri, "Development and elastic analysis of a smart composite pipe joint system incorporated with piezoelectric layers under torsion,", The 3rd international conference on composites: characterization,fabrication and application (CCFA-3), Dec 2012.

A. Maghsoodi, A. Ohadi Hamadani, M. Sadighi, "Calculation of Wave Dispersion Curves in Multi-layered Composite-metal Plates,", Second International Conference on Acoustics and Vibration, Dec 2012.

H. Samareh Salavati Pour, M. Sadighi, A. Kami, "OPTIMIZATION OF THE COMPOSITE TRUNCATED CONE STRUCTURE LAYERS UNDER BUCKLING LOAD,", AEROTECH 2012- Conference on Recent Advances in Aerospace Technology, Nov 2012.

M. Sadighi, "Sliding contact of a rigid punch and a semi infinite homogenous substrate with functionally graded coating-finite difference method,", International conference on mechanical engineering and advanced technology, Oct 2012.

M. Sadighi, "Experimental and numerical ballistic limit of sandwich structures with FMLs skins,", International Conference on Mechanical Engineering and Advanced Technology, Oct 2012.

H. Hosseini Toudeshky, A. Vojdani, M. Sadighi, "Numerical investigation of thermal residual stresses effects on fatigue crack growth of repaired panels bonded with FMLs,", Advances in structural health management and composite structures 2012 (ASHMCS 2012), Aug 2012.

M. Sadighi, "Experimental and Numerical Investigation on Ballistic Limit of GLARE,", International Conference mechanical Engineering & Advanced Technology, Aug 2012.

, M. Sadighi, A. Ohadi Hamadani, "An extended higher-order free vibration analysis of composite sandwich beam with viscoelastic core,", Proceedings of the ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis ESDA2012, Jul 2012.

A. Nikbakht, A. Fallahi Arezodar, M. Sadighi, "INDENTATION OF A FUNCTIONALLY GRADED PLATE BY A RIGID SPHERICAL INDENTER IN THE PRESENCE OF A SEMI-ELLIPTIC SURFACE CRACK,", The ASME 2012 11th Biennial Conference On Engineering Systems Design And Analysis-ESDA2012, Jul 2012.

N. Kordani, S. Sadough Vanini, M. Sadighi, "INVESTIGATION OF MECHANICAL BEHAVIOR OF NANOCOMPOSITE UTILIZING CARBON NANOTUBES,", Mechanics of Nano, Micro and Macro Composite Structures, Jun 2012.

H. Samareh Salavati Pour, Y. Alizadeh Vaghasloo, M. Sadighi, N. Kordani, "OPTIMIZATION OF THE COMPOSITE CONE STRUCTURE LAYERS UNDER BUCKLING LOAD,", Mechanics of Nano, Micro and Macro Composite Structures, Jun 2012.

S. Sadeghnejad, M. Sadighi, A. Ohadi Hamadani, "An Extended Higher-Order Free Vibration Analysis Of Composite Sandwich Beam With Viscoelastic Core,", ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, Jun 2012.

A. Nikbakht, Andrea Zucchelli, M. Sadighi, A. Fallahi Arezodar, "Analysis of Contact between a Functionally Graded Vitreous Enameled Steel Plate and a Rigid Spherical Indenter,", 20th Annual International Conference on Mechanical Engineering-ISME2012, May 2012.

A. Vojdani, M. Sadighi, H. Hosseini Toudeshky, "Experimental investigation on thermal residual stresses effects on fatigue crack growth of repaired panels bonded with FMLs,", The International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2012), Mar 2012.

H. Shahsavari, , M. Sadighi, "parametric study of specific buckling load of cylindrical grid stiffened composite shells,", 2011 International Symposium on Mechanical Science and Technology, Dec 2011.

A. Nikbakht, M. Sadighi, A. Fallahi Arezodar, "Sliding Contact of a Functionally Graded Layer and a Rigid Indenter in the Presence of a Surface Crack,", Forth International Indentation Workshop IIW4, Jul 2011.

M. Mirzaee, H. Akbarshahi, M. Shakeri, M. Sadighi, "Theoretical Model for Collapsing of Hybrid Circular Tubes Under Axial Load,", 16th International Conference on Composite Structures ICCS16, Jun 2011.

A. Nikbakht, M. Sadighi, A. Fallahi Arezodar, "Crack and Contact Problems in a Functionally Graded Plate,", Sixth M.I.T. Conference on Computational Fluid and Solid Mechanics Focus: Advances in Solids & Structures, Jun 2011.

, M. Sadighi, A. Ohadi Hamadani, "A Numerical Study of Free Vibration of Composite Sandwich Plate with Viscoelastic Core,", Eighth International Conference on Composite Science and Technology,ICCST8, Mar 2011.

H. Akbarshahi, M. Sadighi, M. Shakeri, M. Mirzaee, "Mathematical Model for axial crushing of hybrid square tubes,", 8th INTERNATIONAL CONFERENCE ON COMPOSITE SCIENCE AND TECHNOLOGY ICCST 8, Mar 2011.

S. Sadeghnejad, M. Sadighi, A. Ohadi Hamadani, "Free vibration analysis of composite sandwich plate with viscoelastic core,", EIGHTH INTERNATIONAL CONFERENCE ON COMPOSITE SCIENCE AND TECHNOLOGY, Mar 2011.

M. Mirzaee, M. Shakeri, M. Sadighi, H. Akbarshahi, "Crashworthiness Design for Cylindrical Tube Using Neural Network and Genetic Algorithm,", The Twelfth East Asia-Pacific Conference on Structural Engineering and Construction, Jan 2011.

S.K. Hosseini Zad, M. Sadighi, "Modeling and experimental characterization of compressive properties of 3D woven glass-fiber sandwich composites,", The 2nd International Conference on Composites: Characterization, Fabrication and Application (CCFA-2), Dec 2010.

A. Nikbakht, M. Sadighi, A. Fallahi Arezodar, "Indentation of a Functionally Graded Plate with Polynomially Varying Properties by a Rigid Spherical Indenter,", The 2nd International Conference on Composites: Characterization, Fabrication and Application (CCFA-2), Dec 2010.

H. Shahsavari, S. Sadeghnejad, M. Sadighi, "An Analytical and Numerical Investigation of Stiffness Matrix of Different Lattice Grids in Advanced Grid Stiffened Composite Structures,", The 2nd International Conference on Composites: Characterization, Fabrication and Application (CCFA-2), Dec 2010.

H. Shahsavari, , M. Sadighi, "An Analytical and Numerical Investigation of Stiffness Matrix of Different Lattice Grids in Advanced Grid Stiffened Composite Structures,", The 2nd International Conference on Composites: Characterization, Fabrication and Application (CCFA-2), Dec 2010.

E. Bagherizadeh, , M.R. Eslami, M. Sadighi, "Elastic Buckling of FGM Cylindrical Shell Surrounded by an Elastic Foundation,", The 2nd International Conference on Composites: Characterization, Fabrication and Application CCFA-2, Dec 2010.

H. Moradi, F. Bakhtiari Nejad, M. Sadighi, "Designing a Movable Vibration Absorber for an Euler-Brnoulli Beam under Moving Distributed Harmonic Excitation,", ASME 2010 International Mechanical engineering Congress & Exposition, Nov 2010.

M. Shakeri, M. Sadighi, M. Mirzaee, "Using of Neural network and genitic algorithm in multiobjective optimization of coolapsible energy absorbers,", 2nd International Conference on Engineering Optimization, Sep 2010.

M. Mirzaee, M. Shakeri, M. Sadighi, "Using of netural network and genetic algorithm in multiobjective optimization of collaosible energy absobers,", 2nd International Conference on Engineering optimization, Sep 2010.

H. Moradi, F. Bakhtiari Nejad, M. Sadighi, "H-Infinity Robust Control of Robotic Manipulators Based on mu-Synthesis,", The 17th International Congress on Sound and Vibration, Jul 2010.

V. Tajeddini, A. Ohadi Hamadani, M. Sadighi, "3D free vibration analysis of functionally graded thick circular and annular plates on elastic foundation,", 10th Biennial Conference on Engineering Systems Design and Analysis - ESDA2010, Jul 2010.

M. Zarei Mahmoodabadi, M. Sadighi, A. Eyvazian, "Theoretical and experimental crushing analysis of metal square honeycombs under quasi-static loading,", 10th Biennial Conference on Engineering Systems Design and Analysis ESDA2010, Jul 2010.

H. Moradi, F. Bakhtiari Nejad, M. Sadighi, "Active Control of Robatic Manipolators Vibration via Entire Eigenstructure Assignment,", The 17th international Congress on Sound & Vibration, ICSV 17, Jul 2010.

H. Moradi, F. Bakhtiari Nejad, M. Sadighi, "Robust Control of Robotic Manipulators Based on ?-synthesis,", the 17th International Congress on Sound & Vibration, Jul 2010.

M. Afshin, M. Sadighi, M. Shakeri, "Free edge effects in a cylindrical sandwich panel with a flexible core and laminated composite face sheets,", The XVI International conference on mechanics of composite materials, May 2010.

M. Sadighi, S. Dariushi, "Improving Impact Properties of Fiber/Metal Laminates by Using Suitable Layer agreement according to Different Standard Test Methods,", ASME International Mechanical Engineering Congress and Exposition - IMECE 2009, Nov 2009.

M. Sadighi, M. Benavidi, "Bending Response of Transversely Flexible Sandwich Plate to Thermomechanical Loading and with Functionally Graded Skins,", CEAS 2009 European Air and Space Conference, Oct 2009.

H. Moradi, M.M. Rezaii Adriami, M. Sadighi, "Using local modal stiffness for damage detection in a cantilever plate,", Jul 2009.

M. Shakeri, R. Mirzaeifar, M. Sadighi, "The effect of various bounary conditions on phase transformation in shape memory alloy cylindrical panels,", Jul 2009.

H. Moradi, M. Sadighi, "Using an optimum tunable absorber to suppress vibration of a cantileverplate,", Jul 2009.

100

A. Komeili, A. Armin, M. Sadighi, M.R. Eslami, "Static analysis of funcrtionally graded piezoelectric beams under mechanical and electromechanical loads,", Jun 2009.

101

S.K. Hosseini Zad, A.H. Akbarzadeh Shafaroudi, M. Sadighi, A. Komeili, "Propagation of Stress Waves in One Dimensional laminated Composite Structures,", 15th International Conference on Composite Structures ICCS15, Jun 2009.

102

A.H. Akbarzadeh Shafaroudi, S.K. Hosseini Zad, M. Sadighi, M.R. Eslami, "Analytical Solution of Functionally Graded Rectangular Plates under Mechanical Loading,", 15th International Conference on Composite Structures ICCS15, Jun 2009.

103

M. Zarei Mahmoodabadi, M. Sadighi, "A study on metal hexagonal honeycomb crushing under quasi static loading,", May 2009.

104

S. Jedari Salami, S. Sadough Vanini, M. Sadighi, "Determination of dynamic coefficients for structural expanded polypropylene EPP and poly urthane rigid PU foams under low velocity impact,", Mar 2009.

105

A. Nikbakht, A. Fallahi Arezodar, M. Sadighi, "Stress Analysis of a Functionally Graded Rotating Thick-Walled Cylinder under Uniform Internal Pressure,", 7th Internatinal Conference on Composite Sciences and Technology, Jan 2009.

106

A. Nikbakht, A. Fallahi Arezodar, M. Sadighi, "Stress analysis of a cunctionally graded rotating thick waleed cylinder under uniform internal pressure,", Jan 2009.

107

S. Shaghaghi, M. Sadighi, M. Mohammadi Aghdam, "An Experimental and Numerical study of Buckling of Filament-Wound laminated Conical Shells under Axial Compression Loading,", the 1st International Conference on Composites: Characterization, Fabrication and Application CCFA-1, Dec 2008.

108

M. Sadighi, M. Saadati, "Unequal faces effect on fracture of composite sandwich beam with flexible core,", the 1st International Conference on Composites: Characterization, Fabrication and Application - CCFA-1, Dec 2008.

109

A. Nikbakht, M. Sadighi, "An elastic solution for composites and sandwich structures with similar opposite supports,", the 1st International Conference on Composites: Characterization, Fabrication and Application CCFA-1, Dec 2008.

110

M. Sadighi, S. Dariushi, "Effect of fiber orientation and stacking sequence on bending properties of fiber/metal laminates,", 2008 ASME International Mechanical Engineering Congress and Exposition - IMECE, Oct 2008.

111

M. Sadighi, "Bending response of a sandwich panel functionally graded core under thermo mechanical load,", Jul 2008.

112

S. Sadough Vanini, M. Sadighi, "Numerical and experimental study of mechanical behaviour for elastomeric EPDM foam and structural EPP foam under quasi static and impact loadings,", Jul 2008.

113

H. Daghyani, M. Sadighi, "study of thermal stresses on fracture strength of adehsive bonding,", May 2008.

114

, M. Akhlaghi, M. Sadighi, "Material distribution design of functionally graded hollow cylinder under transient thermal loading for heat resisting,", May 2008.

115

M. Asgari, M. Akhlaghi, M. Sadighi, "Reduction of Transient Thermal Stresses in Finite Length Cylinder by Using Two-Dimensional Functionally Graded Materials,", 4th International Conference on High Performance Structures and Materials -HPSM2008, May 2008.

116

M. Asgari, M. Akhlaghi, M. Sadighi, "Material Distribution Design of Functionally Graded Hollow Cylinder under Transient Thermal Loading for Heat Resisting,", 16th Annual (International) Conference on Mechanical Engineering - ISME2008, May 2008.

117

M. Saadati, M. Sadighi, "composite sandwich panels: contact law and critical load,", Jan 2008.

118

M. Sadighi, , M. Saadati, "Low velocity transverse impact response of simply supported sandwich beams,", Dec 2007.

119

M. Sadighi, "A theoretical and experimental study of indentation in composite laminated beams and sandwich beams with composite faces and foam core,", Dec 2007.

120

M. Sadighi, , M. Saadati, "Response of fully backed sandwich beam to low velocity transverse impact,", Dec 2007.

121

M. Sadighi, , M. Saadati, "Study of indentation energy in three point bending of sandwich beams with composite laminated faces and foam core,", Dec 2007.

122

, M. Akhlaghi, M. Sadighi, "Transient Thermal Stresses in Two.Dimensional Functionally Graded Hollow Cylinder Finite Length,", Nov 2007.

123

M. Asgari, M. Akhlaghi, M. Sadighi, "Transient Thermal Stresses in two-Dimensional Functionally Graded Hollow Cylinder with Finite Length,", 9th WSEAS International Conference on Mathematical and Computational Methods in Science and Engineering (MACMESE 2007), Nov 2007.

124

M. Sadighi, E. Rabizadeh, F. Kerman Saravi, "Effects of laminate sequen on thermoforming of thermolastic matrix composites,", Oct 2007.

125

M. Saadati, M. Sadighi, "Composite sandwich panels contact law and indentation critical load,", May 2007.

126

M. Sadighi, "Deflection control of smart functionally graded beams,", Sep 2006.

127

M. Sadighi, "A modified high- order theory for sandwich baems under contact loading,", Sep 2006.

128

F. Mortazvi, M. Sadighi, "Indentation resistance of sandwich beams subjected to localized contact loading,", The 14th Annual (International) Conference of Mechanical Engineering - ISME2006, May 2006.

129

M. Sadighi, "A new algorithm for resoutce manager to enhance the quality of service woIP systems,", Jan 2006.

130

M. Sadighi, "STATIC AND DYNAMIC RESPONSE OF SANDWICH PANELS,", Aug 2000.

131

M. Sadighi, "Static and dynamic response of thick composite laminates,", Oct 1998.

132

M. Sadighi, "Loading of plates backed by an elastic or plastic medium - experimental,", May 1995.

133

M. Sadighi, "Loading of plates backed by an elastic or plastic medium-theory,", May 1995.

دروس ارائه شده

عنوان درس

توصیف درس

سرفصل ها

دوره درسی

Strength of Materials (II)

4051

Composite Materials

4051

Mechanics of Composite Material

4042

Mechanics of Cellular Solids

4042

Strength of Materials (II)

4041

Composite Materials

4041

Mechanics of Composite Material

4032

Behavior of Composite Structures Under Impact Loads

4032

Mechanics of Cellular Solids

4032

اختراعات/ ثبت پتنت

عنوان اختراع

شماره ثبت

کشور ثبت کننده

همکاران

تاریخ ثبت

تاریخ انقضا

ساخت نانوکامپوزیتهای هیبریدی بر پایه اپوکسی/الیاف آرامیدی/نانولایه های میانی مقاوم در برابر بارگزاری های متمرکز فشاری و ضربه سرعت پایین

Iran

سعید صابرسمندری، سیدهژیر بهرامی، مجتبی صدیقی، مصطفی گودرز

1396/11/12

1416/3/12

عنوان اختراع : ساخت نانوکامپوزیت های هیبریدی بر پایه اپوکسی/ الیاف آرامیدی/ نانولایه های میانی مقاوم در برابر بارگذاری های متمرکز فشاری و ضربه سرعت پایین

Iran

مصطفی گودرز، سیدهژیر بهرامی، مجتبی صدیقی، سعید صابرسمندری

1396/3/11

1416/3/12

تولید نوعی میله کامپوزیتی با خواص پیچشی بالا توسط فرآیند بریدینگ- پولتروژن

Iran

محمدصالح احمدی، مجید صفرجوهری، مجتبی صدیقی

1389/1/12

توسعه نوعی روش بریدینگ - پولتروژن جهت تولید قطعات کامپوزیتی

Iran

محمدصالح احمدی، مجید صفرجوهری، مجتبی صدیقی

1388/12/10

ساخت و تقویت کامپوزیت های لایه ای آلومینیوم الیاف شیشه

Iran

مجتبی صدیقی، سهیل داریوشی

1387/11/13