1
Hossein Kheirabadi, Saeed Reza Allahkaram, A. Zarebidaki,
"Enhanced erosion-corrosion resistance of monolithic ENP coating on ductile cast iron by using electrochemical pretreatment and heat treatment",
Surface and Coatings Technology,
vol. 494,
no. 131525,
pp.1-17,
2024.
2
A. Zarebidaki, M. Akbarpour,
"Corrosion and wear behavior of electroless Ni-P-Cu coatings containing 8 and 18 wt% Cu",
Surface and Coatings Technology,
vol. 492,
no. 131228,
pp.1-9,
2024.
3
S.H.A. Lari Seyed Zadeh, A. Zarebidaki, Moslem Mohammadi Soleimani,
"Effects of electroplating parameters on the properties of Fe-P coating",
,
vol. 20,
no. 59,
pp.60-70,
2024.
4
A. Zarebidaki, P. Tahaghoghi Sayar,
"Long-Term Corrosion Behavior of Cu-10Ni and Cu-20Ni Alloys in Simulated Seawater",
Journal of Materials Engineering and Performance,
vol. -,
no. 0,
,
2024.
5
A. Zarebidaki, S. Davoodi,
"Electrodeposition and Characterization of Fe-P Coating Applied onto Mild Steel Substrate",
Jom,
vol. -,
no. 0,
pp.1-7,
2023.
6
A. Zarebidaki, S.H. Lari Seyed Zadeh,
"Effect of P Content on the Corrosion Behavior of Electrodeposited Fe-P Coatings",
Journal of The Electrochemical Society,
vol. 170,
no. 22501,
pp.1-9,
2023.
7
A. Zarebidaki, S.H. Hedaiatmofidi, F. Iranmaneshbahri,
"Effect of 2-mercaptobenzothiazole on the corrosion inhibition of Cu-10Ni alloy in 3 wt% NaCl solution",
Journal of Applied Electrochemistry,
vol. 52,
no. 0,
pp.1773-1788,
2022.
8
A. Zarebidaki, S.H. Hedaiatmofidi, F. Iranmaneshbahri,
"Evaluation of corrosion behavior of Cu-10Ni alloy in 3 wt% NaCl solution through EIS and ENM methods",
Mrs Advances,
vol. 0,
no. 0,
,
2022.
9
A. Zarebidaki, S.H. Hedaiatmofidi, A. Salehi Nodej,
"Corrosion mechanism of titanium dioxide nanotubes in Ringer's solution",
Materials Today Communications,
vol. 29,
no. 0,
pp.102943-102943,
2021.
10
B. Mohammadhassanizadeh, S.H. Hedaiatmofidi, A. Zarebidaki,
"Effect of friction stir process on the microstructure and corrosion behavior of AZ91 Mg alloy",
Materials Chemistry and Physics,
vol. 267,
no. 1,
,
2021.
11
A. Zarebidaki, A. Dastgheib, M.R. Mohammadzadehattar,
"Enhanced barrier properties of epoxy coating containing CaCO3 microparticles modified with cerium nitrate",
Progress In Organic Coatings,
vol. 144,
no. 2020,
pp.1-6,
2020.
12
Saeed Asadi Kouhanjani, A. Zarebidaki, Ali Akbarib,
"The Effect of Sliding Speed and Amount of Loading on Friction and Wear Behavior of Cu-0.65%wt.Cr Alloy",
Journal of Alloys and Compounds,
vol. 489,
no. 0,
pp.319-324,
2019.
13
A. Mostafanejad, M. Iranmanesh, A. Zarebidaki,
"Investigation of Corrosion Behavior of Submerged Arc Welded A131/A and A131/AH32 Steels in Simulated Seawater",
,
vol. 22,
no. 32,
pp.7-19,
2019.
14
A. Mostafanejad, M. Iranmanesh, A. Zarebidaki,
"An experimental study on stress corrosion behavior of A131/A and A131/AH32 low carbon steels in simulated seawater",
Ocean Engineering,
vol. 188,
no. 106204,
pp.1-9,
2019.
15
A. Dastgheib, M.R. Mohammadzadehattar, A. Zarebidaki,
"Evaluation of Corrosion Inhibition of Mild Steel in 3.5 wt% NaCl Solution by Cerium Nitrate",
Metals and Materials International,
vol. 0,
no. 0,
pp.1-9,
2019.
16
Nasrollah Eslamzadeh, Reza Ebrahimi-kahrizsangi, Saeed Karbasi, A. Zarebidaki, Farhad Gharavi,
"Effect of Duty Cycle on the Corrosion of Mg PEO Coatings",
International Journal of Electrochemical Science,
vol. 13,
no. 0,
pp.6236-6247,
2018.
17
V. Salarhoseini, A. Zarebidaki, M.R. Mohammadzadehattar,
"The Effect of Concentraton and Temperature on the Behavior of Copper Corrosion Inhibition by 2 - Mercaptobenzothiazole",
,
vol. 18,
no. 28,
pp.37-48,
2018.
18
A. Zarebidaki, Amir Seifoddini, Taher Rabizadeh,
"Corrosion resistance of Fe77Mo5P9C7.5B1.5in-situ metallic glass matrix composites",
Journal of Alloys and Compounds,
vol. 736,
no. 0,
pp.17-21,
2018.
19
Nasrollah Eslamzadeh, Reza Ebrahimi-kahrizsangi, Saeed Karbasi, A. Zarebidaki, Farhad Gharavi,
"An Investigation into the Corrosion Behavior of MgO/ZrO2 Nanocomposite Coatings Prepared by Plasma Electrolytic Oxidation on the AZ91 Magnesium Alloy",
Journal of Materials Engineering and Performance,
vol. 0,
no. 0,
pp.1-10,
2017.
20
Z. Shahri, S.r. Allahkaram, A. Zarebidaki,
"Electrodeposition and characterization of Co-BN (h) nanocomposite coatings",
Applied Surface Science,
vol. 276,
no. 276,
pp.174-181,
2013.
21
S.r. Allahkaram, A. Zarebidaki, T. Rabizadeh,
"EVALUATION OF ELECTROLESS NI-P AND NI-P NANO-COMPOSITE COATINGS' PROPERTIES",
International Journal of Modern Physics:conference Series(Ijmpcs),
vol. 5,
no. 5,
pp.817-824,
2012.
22
A. Zarebidaki, S.r. Allahkaram,
"Evaluation of corrosion properties of electroless NiP/Nano- SiC composite coatings",
Key Engineering Materials,
vol. 2011,
no. 471,
pp.203-208,
2011.
23
A. Zarebidaki, S.r. Allahkaram,
"Porosity measurement of electroless Ni-P coatings reinforced by CNT or SiC particles",
Surface Engineering,
vol. 28,
no. 6,
pp.400-405,
2011.
24
A. Zarebidaki, S.r. Allahkaram,
"Corrosion assessment of electroless nickel-phosphorous/nanosilicon carbide composite coatings",
Micro and Nano Letters,
vol. 11,
no. 6,
pp.937-940,
2011.
25
A. Zarebidaki, S.r. Allahkaram,
"Effect of heat treatment on the properties of electroless Ni-P-carbon nanotube composite coatings",
Micro and Nano Letters,
vol. 1,
no. 7,
pp.90-94,
2011.
26
A. Zarebidaki, S.r. Allahkaram,
"Effect of surfactant on the fabrication and characterization of Ni-P-CNT composite coatings",
Journal of Alloys and Compounds,
vol. 2011,
no. 509,
pp.1836-1840,
2010.
27
S.r. Allahkaram, M. Honarvar Nazari,, S. Mamaghani,, A. Zarebidaki,
"Characterization and corrosion behavior of electroless Ni-P/nano-SiC coating inside the CO2 containing media in the presence of acetic acid",
Materials and Design,
vol. 32,
no. 2,
pp.750-755,
2010.
28
T. Rabizadeh, S.r. Allahkaram, A. Zarebidaki,
"An investigation on effects of heat treatment on corrosion properties of Ni-P electroless nano-coatings",
Materials and Design,
vol. 31,
no. 7,
pp.3174-3179,
2010.
29
Saeed Asadi Kouhanjani, A. Zarebidaki, Morteza Abedini, N. Parvin,
"Influence of prior cold working on the tribological behavior of Cu-0.65 wt.%Cr alloy",
Journal of Alloys and Compounds,
vol. 2009,
no. 480,
pp.505-509,
2008.
30
F. Akhlaghi, A. Zarebidaki,
"Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024-graphite composites produced by in situ powder metallurgy method",
Wear,
vol. 2008,
no. 266,
pp.37-45,
2007.