1
S.A. Chabok, A. Ahmadpour,
"Data Driven Optimal Design of Flattened Microchannel Heat Sinks with Non-Newtonian Coolants",
Heat Transfer Engineering,
vol. 47,
no. 6,
pp.1-22,
2025.
2
M. Mohammadi, A. Ahmadpour, S.A. Chabok,
"Performance enhancement of double-rotor viscous micropump for transporting Bingham fluid",
International Journal of Thermofluids,
vol. 26,
no. 0,
pp.1-15,
2025.
3
B. Vojoudi, A. Ahmadpour, M. Hajmohammadi,
"Gas/liquid slug flow-based thermal management technique for enhanced proton exchange membrane fuel cell performance",
International Journal of Thermal Sciences,
vol. 212,
no. 0,
pp.1-16,
2025.
4
A. Rezaeishaker, A. Ahmadpour, M. Hajmohammadi,
"A novel design for macro encapsulation of phase change materials for energy storage systems",
Journal of Energy Storage,
vol. 113,
no. 0,
pp.1-16,
2025.
5
A. Firoozi, A. Ahmadpour, M. Hajmohammadi,
"Polymer flooding characteristics in modified Hele-Shaw cells",
Physics of Fluids,
vol. 37,
no. 2,
pp.1-20,
2025.
6
M.S. Yaghoubi, A. Ahmadpour, M. Saffar-avval,
"Geometrical Design of Minichannels with Rectangular Wall Cavities for Flow Boiling Heat Transfer Enhancement",
Results In Engineering,
vol. 25,
no. 0,
pp.1-15,
2025.
7
A. Tarabkhah, R. Hosseini Abardeh, A. Ahmadpour,
"Thermo-economic and environmental study of solar hybridization for existing fossil-fueled combined cycle power plants: comparison of two practical approaches",
Clean Technologies and Environmental Policy,
vol. 0,
no. 0,
,
2024.
8
A. Khoshnevis, A. Ahmadpour, E. Amani,
"Double Emulsion Generation in Shear-thinning Fluids under Electric Field Effects",
International Journal of Mechanical Sciences,
vol. 281,
no. 0,
pp.1-19,
2024.
9
B. Vojoudi, M. Hajmohammadi, A. Ahmadpour,
"Exploring heat transfer augmentation in slug flow through converging channels: A study on enhancement strategies",
International Communications In Heat and Mass Transfer,
vol. 157,
no. 0,
pp.1-10,
2024.
10
M. Soleimani, A. Ahmadpour, E. Amani,
"Numerical investigation of electrohydrodynamically-enhanced flow boiling inside minichannels: The seeding model",
Physics of Fluids,
vol. 35,
no. 4,
pp.1-17,
2023.
11
S. Mirahsani, A. Ahmadpour, M. Hajmohammadi,
"Optimal design of an array of porous obstacles in a partially heated channel using lattice Boltzmann method for the heat transfer enhancement",
International Communications In Heat and Mass Transfer,
vol. 143,
no. 0,
pp.1-13,
2023.
12
E. Amani, A. Ahmadpour, M. Aghajari,
"Large-eddy simulation of turbulent non-Newtonian flows: A comparison with state-of-the-art RANS closures",
International Journal of Heat and Fluid Flow,
vol. 99,
no. 0,
pp.1-14,
2022.
13
H. Nemati Moghaddam, A. Ahmadpour, M. Hajmohammadi,
"-Numerical simulation of convective heat transfer of nano -encapsulated phase change material slurries in micro channels with sinusoidal cavities and rectangular ribs",
Amirkabir Journal of Mechanical Engineering,
vol. 54,
no. 1,
pp.8-8,
2022.
14
A. Ramezan, A. Ahmadpour, M. Hajmohammadi,
"Thermo-hydraulic assessment of non-Newtonian MWCNT nanofluid flows inside microchannels with different cross-sections",
Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science,
vol. 0,
no. 0,
pp.1-17,
2021.
15
E. Amani, A. Ahmadpour, M. Aghajari,
"Dynamic subgrid-scale LES model for turbulent non-Newtonian flows: A priori and a posteriori analyses of Burgers turbulence",
Journal of Non-Newtonian Fluid Mechanics,
vol. 295,
no. 104615,
pp.1-11,
2021.
16
A. Ahmadpour, A. Khoshnevis,
"Numerical simulation of non-Newtonian blood flow in a three dimensional non-planar bifurcation with stenosis",
Amirkabir Journal of Mechanical Engineering,
vol. 53,
no. 9,
pp.4865-4886,
2021.
17
A. Ahmadpour, E. Amani, A. Mashayekhi, M. Soleimani,
"Newtonian and Shear-thinning Taylor flow heat transfer in wavy micro-tubes: a numerical study",
Meccanica,
vol. 0,
no. 0,
pp.1-22,
2021.
18
S.M. Ayatollahi, A. Ahmadpour, M. Hajmohammadi,
"Performance evaluation and optimization of flattened microchannel heat sinks for the electronic cooling application",
Journal of Thermal Analysis and Calorimetry,
vol. 0,
no. 0,
pp.1-15,
2021.
19
P. Moghimighadikolaei, H. Rahimzadeh, A. Ahmadpour,
"Experimental and numerical optimal design of a household solar fruit and vegetable dryer",
Solar Energy,
vol. 214,
no. 0,
pp.575-587,
2020.
20
S.H. Mousavi, A. Ahmadpour, M. Saffar-avval,
"Numerical simulation of convective heat transfer of non-Newtonian carbon-based nanofluids in U-bend tubes using Buongiorno's model",
Journal of Thermal Analysis and Calorimetry,
vol. 0,
no. 0,
pp.1-19,
2020.
21
M.R. Daneshvar Garmroodi, A. Ahmadpour,
"Numerical simulation of stratified waxy crude oil and water flows across horizontal pipes in the presence of wall heating",
Journal of Petroleum Science and Engineering,
vol. 193,
no. 107458,
,
2020.
22
M. Hajmohammadi, S. Gholamrezaie, A. Ahmadpour, Z. Mansoori,
"Effects of applying uniform and non-uniform external magnetic fields on the optimal design of microchannel heat sinks",
International Journal of Mechanical Sciences,
vol. 186,
no. 0,
pp.105886-105897,
2020.
23
A. Ahmadpour, S.P. Mousavi,
"Forced convective heat transfer of Carreau fluids in crossflows over multiple cylinders in tandem and staggered arrangements",
Journal of The Brazilian Society of Mechanical Sciences and Engineering,
vol. 42,
no. 285,
,
2020.
24
M.R. Daneshvar Garmroodi, A. Ahmadpour,
"A numerical study on two-phase core-annular flows of waxy crude oil/water in inclined pipes",
Chemical Engineering Research and Design,
vol. 159,
no. 0,
pp.362-376,
2020.
25
M.R. Daneshvar Garmroodi, A. Ahmadpour, M. Hajmohammadi, S. Gholamrezaie,
"Natural convection of a non-Newtonian ferrofluid in a porous elliptical enclosure in the presence of a non-uniform magnetic field",
Journal of Thermal Analysis and Calorimetry,
vol. 0,
no. 0,
pp.1-17,
2019.
26
A. Torkfar, S.m.a. Noori Rahimabadi, A. Ahmadpour,
"Natural Convection Heat Transfer of Non-Newtonian Power-Law Fluids Within an Array of Elliptic Cylinders",
Journal of Fluids Engineering-Transactions of The Asme,
vol. 142,
no. 0,
pp.1-12,
2019.
27
A. Ahmadpour,
"Displacement flow of thixoelastic fluids by a Newtonian liquid: A multiphase numerical study applicable to the start-up of gelled pipelines",
Journal of Non-Newtonian Fluid Mechanics,
vol. 271,
no. 0,
pp.104-149,
2019.
28
S.m.a. Noori Rahimabadi, A. Ahmadpour, J. P. Meyer,
"Effects of vibration on pool boiling heat transfer from a vertically aligned array of heated tubes",
International Journal of Multiphase Flow,
vol. 118,
no. 0,
pp.97-112,
2019.
29
H. Nasrfard Jahromi, H. Rahimzadeh, A. Ahmadpour, E. Amani,
"Simulation of Intermittent Flow Development in a Horizontal Pipe",
Journal of Fluids Engineering-Transactions of The Asme,
vol. 141,
no. 12,
pp.1-33,
2019.
30
A. Ahmadpour, S.m.a. Noori Rahimabadi,
"Thermal-hydraulic performance evaluation of gas-liquid multiphase flows in a vertical sinusoidal wavy channel in the presence/absence of phase change",
International Journal of Heat and Mass Transfer,
vol. 138,
no. 0,
pp.677-689,
2019.
31
K. Yazdani Motlagh, M. Sahebjamei, A. Ahmadpour,
"Natural Convection Heat Transfer and Entropy Generation in a Porous Trapezoidal Enclosure Saturated with Power-Law Non-Newtonian Fluids",
Heat Transfer Engineering,
vol. 41,
no. 11,
pp.1-20,
2019.
32
H. Nasrfard Jahromi, H. Rahimzadeh, A. Ahmadpour, H. Naderan Tahan,
"Experimental study of condensation heat transfer for R141b in intermittent flow regime within a smooth horizontal tube",
Experimental Thermal and Fluid Science,
vol. 105,
no. 0,
pp.109-122,
2019.
33
E. Amani, A. Ahmadpour, M. Tohidi Moghaddam,
"A numerical study of the rise of a Taylor bubble through a sudden/gradual expansion in Newtonian and shear-thinning liquids",
International Journal of Mechanical Sciences,
vol. 152,
no. 0,
pp.236-246,
2019.
34
A. Ahmadpour, E. Amani, M. Esmaili,
"Numerical simulation of shear thinning slug flows: the effect of viscosity variation on the shape of Taylor bubbles and wall shear stress",
Journal of The Brazilian Society of Mechanical Sciences and Engineering,
vol. 41,
no. 48,
pp.1-18,
2019.
35
A. Sarlak, A. Ahmadpour, M. Hajmohammadi,
"Thermal design improvement of a double-layered microchannel heat sink by using multi-walled carbon nanotube (MWCNT) nanofluids with nonNewtonian viscosity",
Applied Thermal Engineering,
vol. 147,
no. 0,
pp.205-215,
2018.
36
M.R. Daneshvar Garmroodi, A. Ahmadpour, F. Talati,
"MHD mixed convection of nanofluids in the presence of multiple rotating cylinders in different configurations: A two-phase numerical study",
International Journal of Mechanical Sciences,
vol. 150,
no. 0,
pp.247-264,
2018.
37
S.m.a. Noori Rahim Abadi, A. Ahmadpour, J.p. Meyer,
"Numerical simulation of pool boiling on smooth, vertically aligned tandem tubes",
International Journal of Thermal Sciences,
vol. 132,
no. 0,
pp.628-644,
2018.
38
A. Ahmadpour, S.m.a. Noori Rahim Abadi, J.p. Meyer,
"Numerical investigation of pool boiling on a staggered tube bundle for different working fluids",
International Journal of Multiphase Flow,
vol. 104,
no. 0,
pp.89-102,
2018.
39
A. Ahmadpour, M. Nasiri, M. Khazayinejad, N. Asgharian,
"Flow and convective heat transfer of Casson fluid between squeezing porous disks in the presence of thermal radiation, viscous dissipation, and variable heat source/sink",
Journal of The Brazilian Society of Mechanical Sciences and Engineering,
vol. 40,
no. 0,
pp.1-13,
2018.
40
Sahand Majidi, A. Ahmadpour,
"Thermally assisted restart of gelled pipelines: A weakly compressible numerical study",
International Journal of Heat and Mass Transfer,
vol. 118,
no. 0,
pp.27-39,
2017.
41
A. Ahmadpour, A. Allahyarikarnagh,
"Poiseuille flow of a thixo-elastic fluid: analytical and semi-analytical solutions",
Journal of Non-Newtonian Fluid Mechanics,
vol. 247,
no. 0,
pp.239-253,
2017.
42
S.m.a Noori Rahim Abadi, A. Ahmadpour, S.m.n.r. Abadi, J.p. Meyer,
"CFD-based shape optimization of steam turbine blade cascade in transonic two phase flows",
Applied Thermal Engineering,
vol. 112,
no. 0,
pp.1575-1589,
2017.
43
A. Ahmadpour, Sma Noori Rahimabadi, J.p. Meyer,
"On the performance enhancement of thermo-compressor and steam turbine blade cascade in the presence of spontaneous nucleation",
Energy,
vol. 119,
no. 0,
pp.675-693,
2017.
44
A. Salehi-shabestari, A. Ahmadpour, M. Raisee, Kayvan Sadeghy,
"Flow and Displacement of Waxy Crude Oils in a Homogenous Porous Medium: a Numerical Study",
Journal of Non-Newtonian Fluid Mechanics,
vol. 235,
no. 0,
pp.47-63,
2016.
45
A. Ahmadpour, S.m.a Noori Rahimabadi, Ramin Kouhikamali,
"Numerical simulation of two-phase gas-liquid flow through gradual expansions/contractions",
International Journal of Multiphase Flow,
vol. 79,
no. 0,
pp.31-49,
2016.