1
POURFATOLAH AMIRHOSSEIN ، CHABOK SEYED AMIN ، AHMADPOUR ALI,
"Data-driven optimal design of microchannel heat sinks with rectangular ribs and sinusoidal cavities: a ternary hybrid nanofluid coolant",
International Journal of Thermofluids,
vol. 35,
no. ,
pp.1-18,
2026.
2
DADBAKHSH FARZAD ، REZAEISHAKER ALIREZA ، AHMADPOUR ALI ، Hajmohammadi MohammadReza,
"Introducing a novel fin design with concave branches for enhanced melting in a shell-and-tube LHTES system",
Results In Engineering,
vol. 32,
no. ,
pp.111924-111924,
2026.
3
FIROOZI ATAOLLAH ، AHMADPOUR ALI ، Hajmohammadi MohammadReza,
"Polymer flooding characteristics in modified Hele-Shaw cells",
Physics of Fluids,
vol. 37,
no. 2,
pp.1-20,
2025.
4
VOJOUDI BEHNAM ، AHMADPOUR ALI ، Hajmohammadi MohammadReza,
"Gas/liquid slug flow-based thermal management technique for enhanced proton exchange membrane fuel cell performance",
International Journal of Thermal Sciences,
vol. 212,
no. 0,
pp.1-16,
2025.
5
REZAEISHAKER ALIREZA ، AHMADPOUR ALI ، Hajmohammadi MohammadReza,
"A novel design for macro encapsulation of phase change materials for energy storage systems",
Journal of Energy Storage,
vol. 113,
no. 0,
pp.1-16,
2025.
6
MOHAMMADI MELIKA ، AHMADPOUR ALI ، CHABOK SEYED AMIN,
"Performance enhancement of double-rotor viscous micropump for transporting Bingham fluid",
International Journal of Thermofluids,
vol. 26,
no. 0,
pp.1-15,
2025.
7
CHABOK SEYED AMIN ، AHMADPOUR ALI,
"Data Driven Optimal Design of Flattened Microchannel Heat Sinks with Non-Newtonian Coolants",
Heat Transfer Engineering,
vol. 47,
no. 6,
pp.1-22,
2025.
8
YAGHOUBI MOHAMMAD SINA ، AHMADPOUR ALI ، SAFFAR-AVVAL MAJID,
"Geometrical Design of Minichannels with Rectangular Wall Cavities for Flow Boiling Heat Transfer Enhancement",
Results In Engineering,
vol. 25,
no. 0,
pp.1-15,
2025.
9
TARABKHAH AMIN ، HOSSEINI ABARDEH REZA ، AHMADPOUR ALI,
"Thermo-economic and environmental study of solar hybridization for existing fossil-fueled combined cycle power plants: comparison of two practical approaches",
Clean Technologies and Environmental Policy,
vol. 0,
no. 0,
,
2024.
10
KHOSHNEVIS ARMAN ، AHMADPOUR ALI ، AMANI EHSAN,
"Double Emulsion Generation in Shear-thinning Fluids under Electric Field Effects",
International Journal of Mechanical Sciences,
vol. 281,
no. 0,
pp.1-19,
2024.
11
VOJOUDI BEHNAM ، Hajmohammadi MohammadReza ، AHMADPOUR ALI,
"Exploring heat transfer augmentation in slug flow through converging channels: A study on enhancement strategies",
International Communications In Heat and Mass Transfer,
vol. 157,
no. 0,
pp.1-10,
2024.
12
SOLEIMANI MEHRAN ، AHMADPOUR ALI ، AMANI EHSAN,
"Numerical investigation of electrohydrodynamically-enhanced flow boiling inside minichannels: The seeding model",
Physics of Fluids,
vol. 35,
no. 4,
pp.1-17,
2023.
13
MIRAHSANI SABA ، AHMADPOUR ALI ، Hajmohammadi MohammadReza,
"Optimal design of an array of porous obstacles in a partially heated channel using lattice Boltzmann method for the heat transfer enhancement",
International Communications In Heat and Mass Transfer,
vol. 143,
no. 0,
pp.1-13,
2023.
14
AMANI EHSAN ، AHMADPOUR ALI ، AGHAJARI MOHAMMADJAVAD,
"Large-eddy simulation of turbulent non-Newtonian flows: A comparison with state-of-the-art RANS closures",
International Journal of Heat and Fluid Flow,
vol. 99,
no. 0,
pp.1-14,
2022.
15
NEMATI MOGHADDAM HADI ، AHMADPOUR ALI ، Hajmohammadi MohammadReza,
"-Numerical simulation of convective heat transfer of nano -encapsulated phase change material slurries in micro channels with sinusoidal cavities and rectangular ribs",
Amirkabir Journal of Mechanical Engineering,
vol. 54,
no. 1,
pp.8-8,
2022.
16
RAMEZAN AMINREZA ، AHMADPOUR ALI ، Hajmohammadi MohammadReza,
"Thermo-hydraulic assessment of non-Newtonian MWCNT nanofluid flows inside microchannels with different cross-sections",
Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science,
vol. 0,
no. 0,
pp.1-17,
2021.
17
AMANI EHSAN ، AHMADPOUR ALI ، AGHAJARI MOHAMMADJAVAD,
"Dynamic subgrid-scale LES model for turbulent non-Newtonian flows: A priori and a posteriori analyses of Burgers turbulence",
Journal of Non-Newtonian Fluid Mechanics,
vol. 295,
no. 104615,
pp.1-11,
2021.
18
AHMADPOUR ALI ، AMANI EHSAN ، MASHAYEKHI ALIREZA ، SOLEIMANI MEHRAN,
"Newtonian and Shear-thinning Taylor flow heat transfer in wavy micro-tubes: a numerical study",
Meccanica,
vol. 0,
no. 0,
pp.1-22,
2021.
19
AHMADPOUR ALI ، KHOSHNEVIS ARMAN,
"Numerical simulation of non-Newtonian blood flow in a three dimensional non-planar bifurcation with stenosis",
Amirkabir Journal of Mechanical Engineering,
vol. 53,
no. 9,
pp.4865-4886,
2021.
20
AYATOLLAHI SAYED MOEIN ، AHMADPOUR ALI ، Hajmohammadi MohammadReza,
"Performance evaluation and optimization of flattened microchannel heat sinks for the electronic cooling application",
Journal of Thermal Analysis and Calorimetry,
vol. 0,
no. 0,
pp.1-15,
2021.
21
MOGHIMIGHADIKOLAEI POURIA ، RAHIMZADEH HASSAN ، AHMADPOUR ALI,
"Experimental and numerical optimal design of a household solar fruit and vegetable dryer",
Solar Energy,
vol. 214,
no. 0,
pp.575-587,
2020.
22
DANESHVAR GARMROODI MOHAMMAD REZA ، AHMADPOUR ALI,
"Numerical simulation of stratified waxy crude oil and water flows across horizontal pipes in the presence of wall heating",
Journal of Petroleum Science and Engineering,
vol. 193,
no. 107458,
,
2020.
23
MOUSAVI SEYYEDEH HANIEH ، AHMADPOUR ALI ، SAFFAR-AVVAL MAJID,
"Numerical simulation of convective heat transfer of non-Newtonian carbon-based nanofluids in U-bend tubes using Buongiorno's model",
Journal of Thermal Analysis and Calorimetry,
vol. 0,
no. 0,
pp.1-19,
2020.
24
Hajmohammadi MohammadReza ، GHOLAMREZAIE SEPEHR ، AHMADPOUR ALI ، MANSOORI ZOHREH,
"Effects of applying uniform and non-uniform external magnetic fields on the optimal design of microchannel heat sinks",
International Journal of Mechanical Sciences,
vol. 186,
no. 0,
pp.105886-105897,
2020.
25
AHMADPOUR ALI ، MOUSAVI SEYED PEDRAM,
"Forced convective heat transfer of Carreau fluids in crossflows over multiple cylinders in tandem and staggered arrangements",
Journal of The Brazilian Society of Mechanical Sciences and Engineering,
vol. 42,
no. 285,
,
2020.
26
DANESHVAR GARMROODI MOHAMMAD REZA ، AHMADPOUR ALI,
"A numerical study on two-phase core-annular flows of waxy crude oil/water in inclined pipes",
Chemical Engineering Research and Design,
vol. 159,
no. 0,
pp.362-376,
2020.
27
DANESHVAR GARMROODI MOHAMMAD REZA ، AHMADPOUR ALI ، Hajmohammadi MohammadReza ، GHOLAMREZAIE SEPEHR,
"Natural convection of a non-Newtonian ferrofluid in a porous elliptical enclosure in the presence of a non-uniform magnetic field",
Journal of Thermal Analysis and Calorimetry,
vol. 0,
no. 0,
pp.1-17,
2019.
28
TORKFAR ARMAN ، S.M.A. Noori Rahimabadi ، AHMADPOUR ALI,
"Natural Convection Heat Transfer of Non-Newtonian Power-Law Fluids Within an Array of Elliptic Cylinders",
Journal of Fluids Engineering-Transactions of The Asme,
vol. 142,
no. 0,
pp.1-12,
2019.
29
AHMADPOUR ALI,
"Displacement flow of thixoelastic fluids by a Newtonian liquid: A multiphase numerical study applicable to the start-up of gelled pipelines",
Journal of Non-Newtonian Fluid Mechanics,
vol. 271,
no. 0,
pp.104-149,
2019.
30
S.M.A. Noori Rahimabadi ، AHMADPOUR ALI ، J. P. Meyer,
"Effects of vibration on pool boiling heat transfer from a vertically aligned array of heated tubes",
International Journal of Multiphase Flow,
vol. 118,
no. 0,
pp.97-112,
2019.
31
NASRFARD JAHROMI HAMED ، RAHIMZADEH HASSAN ، AHMADPOUR ALI ، AMANI EHSAN,
"Simulation of Intermittent Flow Development in a Horizontal Pipe",
Journal of Fluids Engineering-Transactions of The Asme,
vol. 141,
no. 12,
pp.1-33,
2019.
32
AHMADPOUR ALI ، S.M.A. Noori Rahimabadi,
"Thermal-hydraulic performance evaluation of gas-liquid multiphase flows in a vertical sinusoidal wavy channel in the presence/absence of phase change",
International Journal of Heat and Mass Transfer,
vol. 138,
no. 0,
pp.677-689,
2019.
33
YAZDANI MOTLAGH KAVEH ، SAHEBJAMEI MOHAMMAD ، AHMADPOUR ALI,
"Natural Convection Heat Transfer and Entropy Generation in a Porous Trapezoidal Enclosure Saturated with Power-Law Non-Newtonian Fluids",
Heat Transfer Engineering,
vol. 41,
no. 11,
pp.1-20,
2019.
34
NASRFARD JAHROMI HAMED ، RAHIMZADEH HASSAN ، AHMADPOUR ALI ، NADERAN TAHAN HAMID,
"Experimental study of condensation heat transfer for R141b in intermittent flow regime within a smooth horizontal tube",
Experimental Thermal and Fluid Science,
vol. 105,
no. 0,
pp.109-122,
2019.
35
AHMADPOUR ALI ، AMANI EHSAN ، ESMAILI MOHAMMAD,
"Numerical simulation of shear thinning slug flows: the effect of viscosity variation on the shape of Taylor bubbles and wall shear stress",
Journal of The Brazilian Society of Mechanical Sciences and Engineering,
vol. 41,
no. 48,
pp.1-18,
2019.
36
AMANI EHSAN ، AHMADPOUR ALI ، TOHIDI MOGHADDAM MOHAMMAD,
"A numerical study of the rise of a Taylor bubble through a sudden/gradual expansion in Newtonian and shear-thinning liquids",
International Journal of Mechanical Sciences,
vol. 152,
no. 0,
pp.236-246,
2019.
37
SARLAK ALI ، AHMADPOUR ALI ، Hajmohammadi MohammadReza,
"Thermal design improvement of a double-layered microchannel heat sink by using multi-walled carbon nanotube (MWCNT) nanofluids with nonNewtonian viscosity",
Applied Thermal Engineering,
vol. 147,
no. 0,
pp.205-215,
2018.
38
DANESHVAR GARMROODI MOHAMMAD REZA ، AHMADPOUR ALI ، F. Talati,
"MHD mixed convection of nanofluids in the presence of multiple rotating cylinders in different configurations: A two-phase numerical study",
International Journal of Mechanical Sciences,
vol. 150,
no. 0,
pp.247-264,
2018.
39
S.M.A. Noori Rahim Abadi ، AHMADPOUR ALI ، J.P. Meyer,
"Numerical simulation of pool boiling on smooth, vertically aligned tandem tubes",
International Journal of Thermal Sciences,
vol. 132,
no. 0,
pp.628-644,
2018.
40
AHMADPOUR ALI ، S.M.A. Noori Rahim Abadi ، J.P. Meyer,
"Numerical investigation of pool boiling on a staggered tube bundle for different working fluids",
International Journal of Multiphase Flow,
vol. 104,
no. 0,
pp.89-102,
2018.
41
AHMADPOUR ALI ، NASIRI MILAD ، KHAZAYINEJAD MEHDI ، ASGHARIAN NAVID,
"Flow and convective heat transfer of Casson fluid between squeezing porous disks in the presence of thermal radiation, viscous dissipation, and variable heat source/sink",
Journal of The Brazilian Society of Mechanical Sciences and Engineering,
vol. 40,
no. 0,
pp.1-13,
2018.
42
Sahand Majidi ، AHMADPOUR ALI,
"Thermally assisted restart of gelled pipelines: A weakly compressible numerical study",
International Journal of Heat and Mass Transfer,
vol. 118,
no. 0,
pp.27-39,
2017.
43
AHMADPOUR ALI ، ALLAHYARIKARNAGH ALIREZA,
"Poiseuille flow of a thixo-elastic fluid: analytical and semi-analytical solutions",
Journal of Non-Newtonian Fluid Mechanics,
vol. 247,
no. 0,
pp.239-253,
2017.
44
S.M.A Noori Rahim Abadi ، AHMADPOUR ALI ، S.M.N.R. Abadi ، J.P. Meyer,
"CFD-based shape optimization of steam turbine blade cascade in transonic two phase flows",
Applied Thermal Engineering,
vol. 112,
no. 0,
pp.1575-1589,
2017.
45
AHMADPOUR ALI ، SMA Noori Rahimabadi ، J.P. Meyer,
"On the performance enhancement of thermo-compressor and steam turbine blade cascade in the presence of spontaneous nucleation",
Energy,
vol. 119,
no. 0,
pp.675-693,
2017.
46
A. Salehi-Shabestari ، AHMADPOUR ALI ، M. Raisee ، Kayvan Sadeghy,
"Flow and Displacement of Waxy Crude Oils in a Homogenous Porous Medium: a Numerical Study",
Journal of Non-Newtonian Fluid Mechanics,
vol. 235,
no. 0,
pp.47-63,
2016.
47
AHMADPOUR ALI ، S.M.A Noori Rahimabadi ، Ramin Kouhikamali,
"Numerical simulation of two-phase gas-liquid flow through gradual expansions/contractions",
International Journal of Multiphase Flow,
vol. 79,
no. 0,
pp.31-49,
2016.