1
M.S. Yaghoubi, A. Ahmadpour, M. Saffar-avval,
"Geometrical Design of Minichannels with Rectangular Wall Cavities for Flow Boiling Heat Transfer Enhancement",
Results In Engineering,
vol. 25,
no. 0,
pp.1-15,
2025.
2
H. Aghakhani, M. Saffar-avval, M. Hajmohammadi,
"An innovative solar still design integrated with radiative cooling for sustainable, passive, all-day freshwater harvesting: A comprehensive study",
Sustainable Energy Technologies and Assessments,
vol. 73,
no. 0,
pp.1-14,
2024.
3
M. Karami، شیرین صفاراول, M. Shokri Gazafroudi, H. Aghakhani, Z. Mansoori, M. Saffar-avval,
"Numerical and experimental investigation of floating wick solar still with a porous-media system",
Solar Energy,
vol. 282,
no. 0,
pp.1-19,
2024.
4
H. Eshraghy, E. Amani, M. Saffar-avval,
"Coarse-graining algorithms for the Eulerian-Lagrangian simulation of particle-laden flows",
Journal of Computational Physics,
vol. 493,
no. 0,
pp.1-29,
2023.
5
H. Parsa, M. Saffar-avval, M. Hajmohammadi,
"Improvement of solar air heaters performance with PCM-filled baffles and storage bed",
International Journal of Mechanical Sciences,
vol. 260,
no. 0,
pp.1-23,
2023.
6
S.A. Sadri, H. Parsa, M. Saffar-avval, M. Hajmohammadi,
"Configuration optimization of the honeycomb core in the latent heat thermal energy storage of a solar air heater: Experimental and numerical study",
International Journal of Energy Research,
vol. 46,
no. 5,
pp.5924-5954,
2022.
7
N. Zehtabiyan Rezaie, Kazimierzadamiak, M. Saffar-avval,
"Enhancement of evaporation from liquid surfaces due to electrohydrodynamic flow: A review",
Journal of Electrostatics,
vol. 114,
no. 0,
pp.103630-103630,
2021.
8
H. Parsa, M. Saffar-avval, M. Hajmohammadi,
"3D simulation and parametric optimization of a solar air heater with a novel staggered cuboid baffles",
International Journal of Mechanical Sciences,
vol. 205,
no. 0,
pp.106607-106623,
2021.
9
S. Ramezani, E. Amani, M. Saffar-avval,
"A combined rate-shaping-splitting injection strategy for regulating stratification characteristics of fuel sprays",
Applied Thermal Engineering,
vol. 187,
no. 0,
pp.1-15,
2021.
10
M. Saffar-avval, E. Amani, A. Mehdizadeh, M. Ebrahimi Pour, S. Entzari Zarch, H. Namazi Rabati, M. Esfandiari Mehni,
"Experimental study of partially metal foam wrapped tube bundles",
International Journal of Thermal Sciences,
vol. 162,
no. 0,
pp.106798-106798,
2020.
11
N. Zehtabiyan Rezaie, M. Saffar-avval, Kazimierz Adamiak,
"On the evaporation enhancement from saline water due to corona discharge generated EHD flow: A numerical and experimental study",
International Communications In Heat and Mass Transfer,
vol. 119,
no. 0,
pp.104988-104988,
2020.
12
A. Semati, E. Amani, Farhad Saffaraval, M. Saffar-avval,
"Numerical simulation of oscillating plates at the visco-inertial regime for bio-inspired pumping and mixing applications",
Physics of Fluids,
vol. 32,
no. 0,
pp.1-17,
2020.
13
N. Zehtabiyan Rezaie, M. Saffar-avval, Kazimierz Adamiak,
"Electrohydrodynamic water desalination: Evaluating the productivity and energy consumption",
Desalination,
vol. 497,
no. 0,
pp.114768-114768,
2020.
14
S.H. Mousavi, A. Ahmadpour, M. Saffar-avval,
"Numerical simulation of convective heat transfer of non-Newtonian carbon-based nanofluids in U-bend tubes using Buongiorno's model",
Journal of Thermal Analysis and Calorimetry,
vol. 0,
no. 0,
pp.1-19,
2020.
15
A. Farokhipour, Z. Mansoori, M.A. Rasoulian, A. Rasteh, M. Saffar-avval, G.ahmadi,
"Study of particle mass loading effects on sand erosion in a series of fittings",
Powder Technology,
vol. 373,
no. 1,
pp.118-141,
2020.
16
M. Setareh, M. Saffar-avval, A. Abdullah,
"Heat transfer enhancement in an annulus under ultrasound field: A numerical and experimental study",
International Communications In Heat and Mass Transfer,
vol. 114,
no. 0,
pp.104560-104560,
2020.
17
A. Farokhipour, Z. Mansoori, M. Saffar-avval, G.ahmadi,
"3D computational modeling of sand erosion in gas-liquid-particle multiphase annular flows in bends",
Wear,
vol. 450-451,
no. 1,
pp.203-241,
2020.
18
N. Zehtabiyan Rezaie, M. Saffar-avval, Kazimierz Adamiak,
"Forced convection heat transfer enhancement using a coaxial wire-tube corona system",
Journal of Electrostatics,
vol. 103,
no. 0,
pp.103415-103415,
2019.
19
H. Tofighian, E. Amani, M. Saffar-avval,
"A large eddy simulation study of cyclones: The effect of sub-models on efficiency and erosion prediction",
Powder Technology,
vol. 360,
no. 0,
pp.1237-1252,
2019.
20
Javad Rostami, A. Abbassi, M. Saffar-avval,
"Numerical Heat Transfer by Nanofluids in a wavy walls Microchannel using Dispersion Method",
,
vol. 51,
no. 4,
pp.121-130,
2019.
21
M. Saffar-avval, M.R. Eslami, N. Zehtabiyan Rezaie, M.H. Nahavandian,
"Status of research in the field of engineering in Iran; With a focus on mechanical engineering",
,
vol. 21,
no. 82,
pp.31-57,
2019.
22
N. Zehtabiyan Rezaie, N. Alvandifar, Farhad Saffaraval, M. Makki Abadi, N. Rahmati, M. Saffar-avval,
"A solar-powered solution for water shortage problem in arid and semi-arid regions in coastal countries",
Sustainable Energy Technologies and Assessments,
vol. 35,
no. 0,
pp.1-11,
2019.
23
M. Setareh, M. Saffar-avval, A. Abdullah,
"Experimental and numerical study on heat transfer enhancement using ultrasonic vibration in a double-pipe heat exchanger",
Applied Thermal Engineering,
vol. 159,
no. 0,
pp.1-13,
2019.
24
S.K. Naghib Zadeh, M. Hajmohammadi, M. Saffar-avval,
"Heat transfer enhancement of a nanofluid in ahelical coil with flattened cross-section",
Chemical Engineering Research and Design,
vol. 146,
no. 0,
pp.36-47,
2019.
25
Z. Mansoori, A. Farokhipour, A. Rasteh, M.A. Rasoulian, M. Saffar-avval, Goodarz Ahmadi,
"Study of erosion prediction of turbulent gas-solid flow in plugged tees via CFD-DEM, Powder Technology,352, 136-150, 2019",
Powder Technology,
vol. 352,
no. 1,
pp.136-150,
2019.
26
H. Tofighian, E. Amani, M. Saffar-avval,
"Parcel-number-density control algorithms for the efficient simulation of particle-laden two-phase flows",
Journal of Computational Physics,
vol. 387,
no. 0,
pp.569-588,
2019.
27
A. Farokhipour, Z. Mansoori, M. Saffar-avval, Goodarz Ahmadi,
"Numerical modeling of sand particle erosion at return bends in gas-particle two-phase flow",
Scientia Iranica,
vol. 25,
no. 6,
pp.3231-3242,
2018.
28
M.A. Rasoulian, A. Rasteh, A. Farokhipour, Z. Mansoori, M. Saffar-avval, A. Haj, Goodarz Ahmadi,
"Numerical 3D simulation of developing turbulent stratified gas-liquid flow in curved pipes consisting of entrained particles through this type of flow",
Scientia Iranica,
vol. 25,
no. 6,
pp.3243-3257,
2018.
29
M. Mirzaei, M. Saffar-avval, B. Vahidi, A. Abdullah,
"Theoretical and experimental modeling of EHD conduction in porous conductive material inside a tube",
Journal of Electrostatics,
vol. 97,
no. 0,
pp.15-25,
2018.
30
M. Mohammadpour Ghadikolaie, M. Saffar-avval, Z. Mansoori, N. Alvandifar, N. Rahmati,
"Heat Transfer Investigation of a Tube Partially Wrapped by Metal Porous Layer as a Potential Novel Tube for Air Cooled Heat Exchangers",
Journal of Heat Transfer-Transactions of The Asme,
vol. 141,
no. 0,
pp.1-12,
2018.
31
N. Alvandifar, M. Saffar-avval, E. Amani,
"An Investigation of Flow Across Porous Layer Wrapped Flat Tube Banks",
Transport In Porous Media,
vol. 0,
no. 0,
pp.1-24,
2018.
32
N. Zehtabiyan Rezaie, M. Saffar-avval, Kazimierz Adamiak,
"Numerical investigation of water surface deformation due to corona discharge",
Journal of Electrostatics,
vol. 96,
no. 0,
pp.151-159,
2018.
33
Javad Rostami, A. Abbassi, M. Saffar-avval,
"The reasons of differences between one phase and two phase models of nanofluids heat transfer characteristics: Case study flow in a wavy microchannel",
,
vol. 18,
no. 3,
pp.228-236,
2018.
34
M. Banakermani, H. Naderan Tahan, M. Saffar-avval,
"An investigation of erosion prediction for 15 to 90 elbows by numerical simulation of gas-solid flow",
Powder Technology,
vol. 334,
no. 0,
pp.9-26,
2018.
35
A. Safari, M. Saffar-avval, E. Amani,
"Numerical investigation of turbulent forced convection flow of nano fluid in curved and helical pipe using four-equation model",
Powder Technology,
vol. 328,
no. 0,
pp.47-53,
2018.
36
M. Mirzaei, M. Saffar-avval,
"Enhancement of convection heat transfer using EHD conduction method",
Experimental Thermal and Fluid Science,
vol. 93,
no. 0,
pp.108-118,
2017.
37
E. Dorari, M. Saffar-avval, Z. Mansoori,
"Numerical investigation of the effect of slip coefficient on fluid flow behavior using lattice Boltzmann method",
,
vol. 49,
no. 3,
pp.549-556,
2017.
38
N. Alvandifar, M. Saffar-avval, E. Amani,
"Partially metal foam wrapped tube bundle as a novel generation of air cooled heat exchangers",
International Journal of Heat and Mass Transfer,
vol. 118,
no. 0,
pp.171-181,
2017.
39
Y. Sheikhnejad, M.M. Hosseini, Antonia Teixeira, Ali Shahpari, R. Hosseini Abardeh, M. Saffar-avval,
"Experimental Investigation and Three-Dimensional Analysis of Ferrocovection Through Horizontal Tube Under Magnetic Field of Fixed Parallel Magnet Bars",
Journal of Heat Transfer-Transactions of The Asme,
vol. 139,
no. 0,
pp.101703-101703,
2017.
40
E. Dorari, M. Saffar-avval, Z. Mansoori,
"Sensitivity Analysis of Fluid Flow to Slip Coefficient Using the Lattice Boltzmann Method",
Aut Journal of Mechanical Engineering,
vol. 49,
no. 3,
pp.193-197,
2017.
41
H. Bagheri-esfe, M.J. Kermani, M. Saffar-avval,
"Effects of non-equilibrium condensation on aerodynamics of the flow field in a steam turbine cascade",
Scientia Iranica,
vol. 24,
no. 2,
pp.624-636,
2017.
42
F. Bagherzadeh, M. Saffar-avval, M. Seyfi, A. Abbassi,
"Numerical investigation of nanofluid heat transfer in helically coiled tubes using the four-equation model",
Advanced Powder Technology,
vol. 28,
no. 0,
pp.256-265,
2017.
43
Y. Sheikhnejad, R. Hosseini Abardeh, M. Saffar-avval,
"Experimental study on heat transfer enhansment of laminar ferrofluid flow in horizontal tube partially filled porous media under fixed parallel bars",
Journal of Magnetism and Magnetic Materials,
vol. 424,
no. 0,
pp.16-25,
2016.
44
M. Talebi, M. Setareh, M. Saffar-avval, R. Hosseini Abardeh,
"Numerical investigation of natural convection heat transfer in a cylindrical enclosure due to ultrasonic vibrations",
Ultrasonics,
vol. 76,
no. 0,
pp.52-62,
2016.
45
N. Zehtabiyan Rezaie, M. Mirzaei, M. Saffar-avval,
"Numerical Investigation of Magnetic Field Effect on Heat Transfer and Entropy Generation in Channel; New Approach for Fluid and Length Scale Selections",
Heat Transfer Engineering,
vol. 38,
no. 13,
pp.1222-1232,
2016.
46
N. Zehtabiyan Rezaie, S. Rahimi Damirchi Darasi, M.H. Fazel Zarandi, M. Saffar-avval,
"Generalized Heat Transfer and Entropy Generation of Stratified Air-Water Flow in Entrance of a Mini-channel",
Scientia Iranica,
vol. 00,
no. 0,
,
2016.
47
H. Bagheri Esfe, M.J. Kermani, M. Saffar-avval,
"Effects of non-equilibrium condensation on deviation angle and efficiency in a steam turbine stage",
Journal of Mechanical Science and Technology,
vol. 30,
no. 3,
pp.1351-1361,
2016.
48
E. Dorari, M. Saffar-avval, Z. Mansoori,
"Numerical simulation of gas flow and heat transfer in a rough microchannel using the lattice Boltzmann method",
Physical Review E,
vol. 92,
no. 6,
pp.1-10,
2016.
49
H. Bagheri Esfe, M.J. Kermani, M. Saffar-avval,
"Numerical Simulation of Compressible Two-Phase Condensing Flows",
Journal of Applied Fluid Mechanics,
vol. 9,
no. 3,
pp.1-10,
2015.
50
H. Bagheri Esfe, M.J. Kermani, M. Saffar-avval,
"Effects of Non-equilibrium Condensation on Deviation Angle and Performance Losses in Wet Steam Turbines",
Journal of Applied Fluid Mechanics,
vol. 9,
no. 4,
pp.1-13,
2015.
51
S. Tazarv, M. Saffar-avval, F. Khalvati, E. Mirzaee, Z. Mansoori,
"Experimental Investigation of Saturated Flow Boiling Heat Transfer to TiO2/R141b Nanorefrigerant",
Experimental Heat Transfer,
vol. 29,
no. 1,
pp.1-17,
2015.
52
H. Bagheri Esfe, M.J. Kermani, M. Saffar-avval,
"Effects of surface roughness on deviation angle and performance losses in wet steam turbines",
Applied Thermal Engineering,
vol. 90,
no. 0,
pp.158-173,
2015.
53
H. Akhavan Zanjani, M. Saffar-avval, M. Mansour Kiaei, F. Sharif, M. Ahadi,
"Experimental investigation of laminar forced convective heat transfer of Graphene-water nanofluid inside a circular tube",
International Journal of Thermal Sciences,
vol. 100,
no. 0,
pp.316-323,
2015.
54
S. Mirfendereski, A. Abbassi, M. Saffar-avval,
"Experimental and numerical investigation of nanofluid heat transfer in helically coiled tubes at constant wall heat flux",
Advanced Powder Technology,
vol. 26,
no. 0,
pp.1483-1494,
2015.
55
Y. Sheikhnejad, R. Hosseini Abardeh, M. Saffar-avval,
"Laminar Forced Convection of Ferrofluid in a Horizontal Tube Partially Filled with Porous Media in Presence of a Magnetic Field",
Journal of Porous Media,
vol. 18,
no. 4,
pp.1-12,
2015.
56
M. Rakhsha, F. Akbaridoust, A. Abbassi, M. Saffar-avval,
"Experimental and numerical investigations of turbulent forced convection flow of nano-fluid in helical coiled tubes at constant surface temperature",
Powder Technology,
vol. 283,
no. 0,
pp.178-189,
2015.
57
Y. Sheikhnejad, R. Hosseini Abardeh, M. Saffar-avval,
"Effect of different magnetic field distributions on lamina ferro-convection heat transfer in horizontal tube",
Journal of Magnetism and Magnetic Materials,
vol. 389,
no. 0,
pp.136-143,
2015.
58
J. Rostami, A. Abbassi, M. Saffar-avval,
"Optimization of conjugate heat transfer in wavy walls microchannels",
Applied Thermal Engineering,
vol. 82,
no. 0,
pp.318-328,
2015.
59
N. Zehtabiyan Rezaie, M. Saffar-avval, M. Mirzaei,
"Analytical and numerical investigation of heat transfer and entropy generation of stratified two-phase flow in mini-channel",
International Journal of Thermal Sciences,
vol. 90,
no. 0,
pp.24-37,
2014.
60
M. Jafari, Z. Mansoori, M. Saffar-avval, Jgoodarz Ahmadi,
"The effects of wall roughness on erosion rate in gas-solid turbulent annular pipe flow",
Powder Technology,
vol. 271,
no. 0,
pp.248-254,
2014.
61
S. Bahrehmand, A. Abbassi, M. Saffar-avval,
"Experimental and numerical investigation of turbulent nanofluid flow in helically coiled tubes under constant wall heat flux using Eulerian-Lagrangian approach",
Powder Technology,
vol. 269,
no. 0,
pp.93-100,
2014.
62
N. Mokhtarifar, F. Saffar Aval, M. Saffar-avval, Z. Mansoori, A. Siami,
"Experimental Modelling of Gas-Solid Heat Transfer in a Pipe with Various Inclination Angles",
Heat Transfer Engineering,
vol. 36,
no. 1,
pp.113-122,
2014.
63
M. Jafari, Z. Mansoori, M. Saffar-avval, Goodarz Ahmadi, A. Ebadi,
"Modeling and numerical investigation of erosion rate for turbulent two-phase gas-solid flow in horizontal pipes",
Powder Technology,
vol. 267,
no. 0,
pp.362-370,
2014.
64
M. Mahdavi, M. Saffar-avval, Saeed Tiari, Z. Mansoori,
"Entropy generation and heat transfer numerical analysis in pipes partially filled with porous medium",
International Journal of Heat and Mass Transfer,
vol. 79,
no. 0,
pp.496-506,
2014.
65
H. Akhavan Zanjani, M. Saffar-avval, M. Mansour Kiaei, M. Ahadi, F. Sharif,
"Turbulent Convective Heat Transfer and Pressure Drop of Graphene-Water Nanofluid Flowing inside a Horizontal Circular Tube",
Journal of Dispersion Science and Technology,
vol. 35,
no. 0,
pp.1230-1240,
2014.
66
M. Pishvar, M. Saffar-avval, Z. Mansoori, M. Amirkhosravi,
"Three dimensional heat transfer modeling of gas-solid flow in a pipe under various inclination angles",
Powder Technology,
vol. 262,
no. 0,
pp.223-232,
2014.
67
M. Mirzaei, M. Saffar-avval, H. Naderan Tahan,
"Heat Transfer Investigation of Laminar Developing Flow of Nanofluids in a Microchannel Based on an Eulerian-Lagrangian Approach",
Canadian Journal of Chemical Engineering,
vol. 9999,
no. 0,
pp.1-11,
2014.
68
Peyman Sindareh-esfahani, , M. Saffar-avval, Ali Ghaffari, F. Bakhtiari Nejad,
"Cold start-up condition model for heat recovery steam generators",
Applied Thermal Engineering,
vol. 65,
no. 0,
pp.502-512,
2014.
69
M. Hajmohammadi, H. Esgandari Ardebili, M. Saffar-avval, Antonio,
"A new configuration of bend tubes for compound optimization of heat and fluid flow",
Energy,
vol. 62,
no. 0,
pp.418-424,
2013.
70
M. Saffar-avval, Z. Mansoori, Sahand Behboodi Kalhori, A. Abbassi, B. Dabir, M. Sharif,
"Development of a CHP/DH system for the new town of Parand: An opportunity to mitigate global warming in Middle East",
Applied Thermal Engineering,
vol. 59,
no. 0,
pp.298-308,
2013.
71
Hameh Moradi, Ariya Alasty, M. Saffar-avval, F. Bakhtiari Nejad,
"Multivariable control of an industrial boiler-turbine unit with nonlinear model: A comparison between gain scheduling and feedback linearization approaches",
Scientia Iranica,
vol. 20,
no. 5,
pp.1485-1498,
2013.
72
H.R. Rayatzadeh, M. Saffar-avval, M. Mansour Kiaei, A. Abbassi,
"Effect of Continuous Sonification on Laminar Convective Heat Transfer Inside a Tube Using Water - TiO2 Nanofluid",
Experimental Thermal and Fluid Science,
vol. 48,
no. 1,
pp.8-14,
2013.
73
B. Tajik, A. Abbassi, M. Saffar-avval, A. Abdullah,
"Heat Transfer enhancement by acoustic streaming in a closed cylindrical enclosure filled with water",
International Journal of Heat and Mass Transfer,
vol. 60,
no. 1,
pp.230-235,
2013.
74
M. Saffar-avval, Sahand Behboodi Kalhori, Z. Mansoori, Mehdi Sharif,
"Hourly energy analysis and feasibility study of employing a thermocline TES system for an integrated CHP and DH network",
Energy Conversion and Management,
vol. 68,
no. 0,
pp.281-292,
2013.
75
S. Naemi, M. Saffar-avval, Sahand Behboodi Kalhori, Z. Mansoori,
"Optimum design of dual pressure heat recovery steam generator using nondimensional parameters based on thermodynamic and thermoeconomic approaches",
Applied Thermal Engineering,
vol. 52,
no. 2,
pp.371-384,
2013.
76
F. Akbaridoust, M. Rakhsha, A. Abbassi, M. Saffar-avval,
"Experimental and numerical investigation of nanofluid heat transfer in 3 helically coiled tubes at constant wall temperature using dispersion model",
International Journal of Heat and Mass Transfer,
vol. 58,
no. 0,
pp.480-491,
2013.
77
H. Moradi, M. Saffar-avval, Aria Alasty,
"Nonlinear dynamics bifurcation and performance analysis of an air-handling unit Disturbance rejection via feedback linearization",
Energy and Buildings,
vol. 0,
no. 0,
,
2012.
78
H. Moradi, M. Saffar-avval, F. Bakhtiari Nejad,
"Sliding mode control of drum water level in an industrial boiler unit with time varying parameters: A comparison with H infinity robust control approach",
Journal of Process Control,
vol. 0,
no. 0,
,
2012.
79
B. Tajik, A. Abbassi, M. Saffar-avval, A. Abdullah, M. Kazemi, H. Babay,
"Experimental Investigation of Heat Transfer enhancement by acoustic streaming in a closed cylindrical enclosure",
Chemical, Polymer and Material Science and Technology, Amirkabir,
vol. 44,
no. 1,
pp.11-20,
2012.
80
B. Tajik, A. Abbassi, M. Saffar-avval, A. Abdullah,
"NUMERICAL SIMULATION OF ACOUSTIC STREAMING FOR NONLINEAR STANDING ULTRASONIC WAVE IN WATER INSIDE AXISYMMETRIC ENCLOSURE",
Engineering Applications of Computational Fluid Mechanics,
vol. 6,
no. 3,
pp.366-381,
2012.
81
B. Nojabaei, Z. Mansoori, M. Saffar-avval,
"Heat Transfer in Turbulent Liquid-solid Flow Considering the Interparticle Collision Effect",
Petroleum Science and Technology,
vol. 30,
no. 12,
pp.1296-1306,
2012.
82
H. Moradi, F. Bakhtiari Nejad, M. Saffar-avval,
"Multivariable robust control of an air-handling unit: A comparison between pole-placement and H1 controllers",
Energy Conversion and Management,
vol. 55,
no. 1,
pp.136-148,
2012.
83
B. Tajik, A. Abbassi, M. Saffar-avval, M. Ahmadi Najafabadi,
"Ultrasonic properties of suspensions of TiO2 and Al2O3 nanoparticles in water",
Powder Technology,
vol. 217,
no. 0,
pp.171-176,
2012.
84
Mohammad Kalteh, A. Abbassi, M. Saffar-avval, Arjan Frijns, Anton Darhuber, Jens Harting,
"Experimental and numerical investigation of nanofluid forced convection inside a wide microchannel heat sink",
Applied Thermal Engineering,
vol. 36,
no. 0,
pp.260-268,
2012.
85
Z. Mansoori, M. Saffar-avval, S. Taghavi,
"Numerical Modeling of Nanofluid Heat Transfer in a Pipe",
International Review of Chemical Engineering,
vol. 3,
no. 4,
pp.419-426,
2011.
86
N. Alvandifar, M. Abkar, Z. Mansoori, M. Saffar-avval, G. Ahmadi,
"Turbulence modulation for gas - particle flow in vertical tube and horizontal channel using four-way Eulerian-Lagrangian approach",
International Journal of Heat and Fluid Flow,
vol. 32,
no. 4,
pp.826-833,
2011.
87
R. Kouhikamali, A. Abbassi, S. Sadough Vanini, M. Saffar-avval,
"Numerical simulation and parametric study of forced convective condensation in vertical channel",
,
vol. 43,
no. 1,
pp.25-34,
2011.
88
M. Ahmadi, M. Saffar-avval, T. Yousefi, M. Goharkhah, B.nasr, M. Ashjaee,
"Temperature measurement of a premixed radially symmetric methane flame jet using the Mach-Zehnder Interferometry",
Optics and Lasers In Engineering,
vol. 49,
no. 7,
pp.859-865,
2011.
89
M. Bidi, M.R. Heirani Nobari, M. Saffar-avval, A. Yarahmadi,
"A NUMERICAL STUDY ON THE SECOND LAW ANALYSIS OF THE FLAME STABILIZATION AND OPTIMIZATION IN A POROUS BURNER",
Journal of Porous Media,
vol. 13,
no. 10,
pp.875-894,
2010.
90
S. Alikhani, Amin Behzadmehr, M. Saffar-avval,
"Numerical Study of nanofluid mixed convection in a horizontal curved tube using two-phase approach",
Heat and Mass Transfer,
vol. 0,
no. 0,
,
2010.
91
M. Bidi, M.R. Heirani Nobari, M. Saffar-avval,
"A numerical evaluation of combustion in porous media by EGM (Entropy Generation Minimization",
Energy,
vol. 35,
no. 8,
,
2010.
92
M. Kalteh, A. Abbassi, M. Saffar-avval, Jens Harting,
"Eulerian-Eulerian two-phase numerical simulation of nanofluid laminar forced convection in a microchannel",
International Journal of Heat and Fluid Flow,
vol. 32,
no. 0,
pp.107-116,
2010.
93
P. Forooghi, M. Abkar, M. Saffar-avval,
"Steady and Unsteady Heat Transfer in a Channel Partially Filled with Porous Media Under Thermal Non-Equilibrium Condition",
Transport In Porous Media,
vol. 0,
no. 0,
,
2010.
94
M. Saffar-avval,
"Prediction of nanofluid convective heat transfer using the dispersion model",
International Journal of Thermal Sciences,
vol. ,
no. 49,
,
2010.
95
H. Moradi, M. Saffar-avval, F. Bakhtiari Nejad,
"Nonlinear multivariable control and performance analysis of an air-handling unit",
Energy and Buildings,
vol. 0,
no. 0,
,
2010.
96
F. Behzad, Z. Mansoori, M. Saffar-avval, H. Basirat Tabrizi,
"Thermal stochastic collision model in turbulent gas-solid pipe flows",
International Journal of Heat and Mass Transfer,
vol. ,
no. 53,
,
2010.
97
F. Bakhtiari Nejad, M. Saffar-avval,
"A comparative study between linear and sliding mode adaptive controllers for a hot gas generator",
Applied Thermal Engineering,
vol. 30,
no. 5,
,
2010.
98
H. Moradi, F. Bakhtiari Nejad, M. Saffar-avval,
"Robust control of an industrial boiler system; a comparison between two approaches: Sliding mode control & H 00 technique",
Energy Conversion and Management,
vol. 6,
no. 50,
,
2009.
99
H. Moradi, F. Bakhtiari Nejad, M. Saffar-avval,
"Robust control of an industrial boiler system; a comparison between two approaches: Sliding mode control & Hoo technique",
Energy Conversion and Management,
vol. ,
no. 50,
,
2009.
100
A. Abbassi, S. Sadough Vanini, M. Saffar-avval,
"Thermodynamic Design and Parametric Study of MED-TVC",
Desalination,
vol. ,
no. 222,
,
2008.
101
S. Farhad, M. Saffar-avval, M. Younessi Sinaki,
"Efficient Design of Feedwater Heaters Network in Steam Power Plants Using Pinch Technology and Energy Analysis",
International Journal of Energy Research,
vol. ,
no. 1,
,
2008.
102
M. Bidi, M.R. Heirani Nobari, M. Saffar-avval,
"A Numerical Investigation of Turbulent Premixed Methane -Air Combustion in a Cylindrical Chamber",
Combustion Science and Technology,
vol. ,
no. 179,
,
2007.
103
M.R. Assari, H. Basirat Tabrizi, M. Saffar-avval,
"Numerical Simulation of Fluid Bed Drying Based on Two-Fluid Model and Experimental Validation",
Applied Thermal Engineering,
vol. ,
no. 27,
,
2007.
104
M. Saffar-avval, N Galanis,
"Prediction of Turbulent Forced Convection of a Nanofluid in a Tube With Uniform Heat Flux Using a two Phase Approach",
International Journal of Heat and Fluid Flow,
vol. ,
no. 28,
,
2007.
105
M. Saffar-avval, H. Basirat Tabrizi, Z. Mansoori, P. Ramezani Namin,
"Gas -Solid Turbulent Flow and Heat TRANSFER With Collision Effect in a Vertical Pipe",
International Journal of Thermal Sciences,
vol. ,
no. 46,
,
2007.
106
M.J. Kermani, M. Zayernouri, M. Saffar-avval,
"Generalization of Analytical Two-Phase Steam Flow Calculator to High-Pressure Cases",
,
vol. ,
no. 4,
,
2006.
107
Z. Mansoori, P. Ramezani Namin, M. Saffar-avval, H. Basirat Tabrizi,
"Thermal Turbulent Simulation of Gas-Solid Flow in a Riser",
,
vol. ,
no. 2,
,
2006.
108
Z. Mansoori, M. Saffar-avval, H. Basirat Tabrizi, B. Dabir,
"Inter -Particle Heat Transfer in a Riser of Gas -Solid Turbulent Flows",
Powder Technology,
vol. ,
no. 159,
,
2005.
109
B. Khalifeh Soltan, M. Saffar-avval, E. Damangir,
"Minimizing Capital and Operating Costs Shell and Tube Condensers Using Optimum Baffle Spacing",
Applied Thermal Engineering,
vol. ,
no. 24,
,
2004.
110
M. Saffar-avval, H. Basirat Tabrizi, Z. Mansoori, P. Ramezani Namin,
"Particle collision effect in a vertical pipe developing turbulent gas _ solid flow",
International Journal of Heat and Mass Transfer,
vol. ,
no. ,
,
2004.
111
B. Khalifeh Soltan, M. Saffar-avval, E. Damangir,
"Minimizing capital and operating costs of shell and tube condensers using optimum baffle spacing",
Applied Thermal Engineering,
vol. ,
no. 24,
,
2004.
112
S. Porkheial, , M. Saffar-avval,
"Transient response of dry expansion evaporator in household refrigerators",
Applied Thermal Engineering,
vol. ,
no. ,
,
2004.
113
Z. Mansoori, M. Saffar-avval, H. Basirat Tabrizi,
"Experimental study of turbulent gas-solid heat transfer at different particles temperature",
Experimental Thermal and Fluid Science,
vol. ,
no. ,
,
2004.
114
M. Aliehyaei, A. Abbassi, M. Saffar-avval,
"Analysis of theoretical optimization of indirect evaporative coolers with flat plates",
Iranian Journal of Energy,
vol. ,
no. ,
,
2003.
115
H. Basirat Tabrizi, M. Saffar-avval, M.R. Assari,
"Two-dimensional mathematical model of a packed bed dryer and experimentation",
Proceedings of The Institution of Mechanical Engineers Part A-Journal of Power and Energy,
vol. ,
no. ,
,
2002.
116
Z. Mansoori, M. Saffar-avval, H. Basirat Tabrizi,
"Thermo-mechanical modeling of turbulent heat transfer in gas-solid flows including particle collisions",
International Journal of Heat and Fluid Flow,
vol. ,
no. ,
,
2002.
117
Z. Mansoori, M. Saffar-avval, H. Basirat Tabrizi,
"Modeling of heat transfer in turbulent gas-solid flow",
International Journal of Heat and Mass Transfer,
vol. ,
no. 6,
,
2002.
118
M.R. Assari, H. Basirat Tabrizi, M. Saffar-avval,
"Heat and moisture simulation of a drying process with a two-fluid model in a fluidized bed",
,
vol. ,
no. ,
,
2002.
119
A. Abbassi, M. Saffar-avval, M. Shahnazari,
"Determination of energy consumption criterion and ranking of compression water chillers in iran",
,
vol. ,
no. 14,
,
2002.
120
H. Basirat Tabrizi, M.R. Assari, M. Saffar-avval, B. Dabir,
"Numerical simulation of fluidized bed dryer by using a two-fluid model and applying to packed bed dryer",
,
vol. 0,
no. 0,
,
2002.
121
H. Basirat Tabrizi, M.R. Assari, M. Saffar-avval, B. Dabir,
"Numerical simulation of fluidized bed drying with a two-fluid model",
International Journal of Engineering Science,
vol. ,
no. 53,
,
2001.
122
G. Asjrafi, H. Basirat Tabrizi, M. Saffar-avval,
"Transient heat transfer through the superficial tissue",
,
vol. ,
no. ,
,
1998.
123
M. Saffar-avval, E. Damangir,
"A general correlation of determining of optimum baffle spacing for all types of shell and tube exchangers",
International Journal of Heat and Mass Transfer,
vol. ,
no. 13,
,
1995.
124
M. Saffar-avval, M. Ahsan,
"Experimental investigation of circulating fluidized bed heat exchanger for heat recovery",
,
vol. 0,
no. 0,
,
1993.