سیداحسان میرصالحی - دانشگاه صنعتی امیرکبیر

خدمات ویژه: هیئت علمی دانشجویان دانش آموختگان کارکنان

مطالب پایگاه

اعضای هیات علمی

اینترنت

پست الکترونیک

اتوماسیون اداری و مکاتبات

پورتال آموزشی و پژوهشی

سامانه آموزش الکترونیک

مدیریت یادگیری - دروس حضوری

سامانه ارتقای اساتید(اوج)

سامانه جامع نظام پیشنهادها

سامانه یکپارچه کتابخانه‌ها

سامانه مدیریت یکپارچه آموزش کارکنان

دانشگاه صنعتی امیرکبیر

سامانه رزومه

سیداحسان میرصالحی

استاد
دانشکده مهندسی مواد و متالورژی
گروه آموزشی فرآیندهای ساخت

دریافت با فرمت PDF English

پست الکترونیک:

mirsalehi

aut.ac.ir

شماره تماس:

h-index (Scopus):

35.00

ارجاعات (Scopus):

2762

رساله‌های دکتری

عنوان پایان‌نامه

توسط

تاریخ دفاع

تاثیر تکامل ریزساختار بر خواص مکانیکی اتصال سوپر آلیاژ پایه نیکل 939 به روش پیوند فاز مایع گذرا

حمید تازیکه و سید احسان میرصالحی

خرداد 1402

تاثیر ریز ساختار بر خواص مکانیکی نانو کامپوزیت در سیستم Al-ZrO2 تولیدی بروش همزن اصطکاکی

علی یعقوبی و سید احسان میرصالحی

مهر 1401

تاثیر متغیرهای فرآیند پیوند فاز مایع گذرا بر ریزساختار و خواص مکانیکی اتصال آلیاژ اینکول 617

علی نساج پوراصفهانی و سید احسان میرصالحی

شهریور 1401

ساز و کار ایجاد اتصال بین آلیاژ آلومینیوم و فولاد دو فازی با استفاده از روش اصطکاکی اغتشاشی نقطه ای و افزودن لایه واسط

صالح علائی بهمند و سید احسان میرصالحی

آذر 1400

تاثیر متغیرهای فرآیند لحیم کاری سخت بر ریزساختار, خواص و مدلسازی ترمودینامیکی فصل مشترک اتصالB4Cتوسط آلیاژپرکننده پایه نیکلی

علی امیرنصیری و سید احسان میرصالحی

آذر 1400

اندازه گیری مقاومت به سوزش پوشش های کامپوزیتی ZrB2-SiC/SiC بر روی گرافیت

رضا علی عسگریان و مالک نادری

تیر 1397

پایان‌نامه‌های کارشناسی ارشد

عنوان پایان‌نامه

توسط

تاریخ دفاع

تولید نانوکامپوزیت زمینه آلومینیومی با افزودن نانو ذرات زیرکونیا با ترکیب روش های ساخت افزایشی قوس سیم و فرآیند اصطکاکی اغتشاشی

مهرداد باقری و سید احسان میرصالحی

اسفند 1403

ساخت نانوکامپوزیت هیبریدی AA5083 همراه نانو افزودنی های TiO2 و CeO2 با روش رسوب دهی اصطکاکی اغتشاشی

محمد نویدی هلان و سید احسان میرصالحی

بهمن 1402

ساخت نانوکامپوزیت هیبریدی AA5083/CeO2/B4C با استفاده از فرایند رسوب دهی اصطکاکی اغتشاشی

حسین رزم جو و سید احسان میرصالحی

بهمن 1402

ساخت نانو کامپوزیت هیبریدی الماس/ Al5083/TiN توسط فرایند رسوب گذاری اصطکاکی اغتشاشی

میلاد عباسی نهر و سید احسان میرصالحی

بهمن 1402

تولید نانو کامپوزیت زمینه آلومنیومی تقویت شده با نانو تیوب کربنی (CNT) با استفاده از لایه نشانی توسط روش اصطکاکی اغتشاشی

محمدعلی قلندری و سید احسان میرصالحی

تیر 1402

تولید نانوکامپوزیت آلومینیوم/کاربید تیتانیوم و گرافن با استفاده از رسوبدهی توسط فرآیند اصطکاکی-همزنی

امیرحسین صحرائی برجلو و سید احسان میرصالحی

اسفند 1401

تولید نانوکامپوزیتهای زمینه آلومینیمی تقویت شده با نانوذرات گرافن و B4C به روش سطح کاری اصطکاکی اغتشاشی

سهیل کیانی و سید احسان میرصالحی

اسفند 1401

بررسی تاثیر شرایط اجرای فرآیند ذوب لیزر گزینشی (SLM) در ساخت قطعات از جنس فولاد زنگ نزن آستنیتی

هادی محمدی و سید احسان میرصالحی

خرداد 1401

تاثیر سرعت چرخش ابزار در فرآیند رسوب دهی اصطکاکی همزنی نانو کامپوزیت زمینه آلومینیومی

احمد پاپی و سید احسان میرصالحی

خرداد 1401

تاثیر سرعت پیشروی ابزار در فرایند رسوب دهی نانوکامپوزیت زمینه آلومینیوم با استفاده از روش اصطکاکی همزنی

علی شیخ الاسلامی نوری و سید احسان میرصالحی

اسفند 1400

تحلیل و بررسی تنش های پسماند در قطعات تولید شده به روش پرینت سه بعدی

سعید چراغ سحرکیاسرایی و سید احسان میرصالحی

مرداد 1400

ساخت نانو کامپوزیت Al - ZrO2 با استفاده از فرآیند اصطکاکی اغتشاشی

امیر جمالی و سید احسان میرصالحی

بهمن 1399

پیش بینی میزان و نوع فازهای بین فلزی در اتصال آلیاژ آلومینیوم به فولاد در حضور لایه میانی

عماد چراغی ریزی و اسلام رنجبرنوده

دی 1399

بررسی تأثیر افزودن لایه میانی و نانو ذرات بر ریزساختار و خواص مکانیکی اتصالات جوشکاری اصطکاکی اغتشاشی نقطه ای آلیاژ آلومینیوم 6061 به فولاد کم کربن

کامبیز مرادی و سید احسان میرصالحی

بهمن 1398

بررسی ریزساختار و خواص مکانیکی اتصال نامشابه آلیاژ Ti-6AL-4V به سوپرآلیاژ اینکونل 625 به روش پیوند فاز مایع گذرا

بهنام ذریت الحسینی و سید احسان میرصالحی

مهر 1398

پیوند فاز مایع گذرای سوپر آلیاژ اینکونل 625

سوشیانت وحیدی و سید احسان میرصالحی

تیر 1398

جوشکاری اصطکاکی اغتشاشی نقطه ای اتصال غیرهمجنس آلومینیوم - مس با افزودن نانو ذرات SiC

مهدی علیزاده و علی شمسی پور

اسفند 1397

اتصال اصطکاکی اغتشاشی نقطه ای مس به آلومینیم با استفاده از لایه واسط روی

علیرضا حیدری وانقی و سید احسان میرصالحی

اسفند 1397

جوشکاری اصطکاکی اغتشاشی نقطه ای فولاد کم آلیاژی استحکام بالای به کار رفته در بدنه خودرو

پژمان احمدی و سید احسان میرصالحی

شهریور 1397

شبیه سازی اجزا محدود تغییر شکل ناشی از جوش در سازه ی بزرگ با استفاده از روش کرنش ذاتی

امیرحسین صادقیان و اسلام رنجبرنوده

بهمن 1396

اتصال سوپر آلیاژ پایه نیکل اینکونل 939 به روش پیوند فاز مایع گذرا

فرزام ارحمی و سید احسان میرصالحی

بهمن 1396

اتصال اصطکاکی اغتشاشی نقطه ای آلیاژ تیتانیوم Ti-6Al-4V

افشین زهدی و سید احسان میرصالحی

بهمن 1396

اتصال پلی پروپیلن به آلومینیوم 5052 با روش جوشکاری اصطکاکی اغتشاشی

بهنام عبدالعلی پوراصل جانی و کامران دهقانی

بهمن 1395

توسعه دیاگرام های برآورد شکست برای جوش های نانوکامپوزیت آلیاژ آلومینیوم 5083 تولید شده به روش فرآیند جوشکاری اصطکاکی اغتشاشی

بهروز رحمتیان و سید احسان میرصالحی

بهمن 1395

تعمیر پوسته های بخش داغ توربین های گازی از جنس آلیاژ اینکونل 617 با استفاده از فرآیند پیوند فاز مایع گذرا

حسن اسماعیلی و سید احسان میرصالحی

بهمن 1395

اتصال غیرهم جنس مس به آلومینیم به روش جوشکاری اصطکاکی اغتشاشی با افزودن نانو ذرات SiC

فرهاد بختیاری ارگسی و علی شمسی پور

بهمن 1395

بررسی ریز ساختار و خواص مکانیکی اتصال فاز مایع گذرای آلیاژ منیزیم AZ31

سهراب قهری صارمی و سید احسان میرصالحی

مهر 1395

مدلسازی و بررسی ریز ساختار و خواص مکانیکی اتصالات سپری جوشکاری اصطکاکی اغتشاشی مس

بهروز ترابی محسن آباد و سید احسان میرصالحی

شهریور 1395

شبیه سازی اجزا محدود تنش های پسماند جوشکاری تعمیری حین سرویس

معین حسین پور و اسلام رنجبرنوده

تیر 1395

بررسی خواص مکانیکی اتصالات جوشکاری اصطکاکی اغتشاشی یک و دوطرفه آلیاژ آلومینیومAA6061

ایمان حجازی و سید احسان میرصالحی

اسفند 1394

اتصال نامتجانس آلیاژ منیزیم AZ91C به فولاد زنگ نزن آستنیتی 316 توسط فرآیند پیوند فاز مایع گذرا با استفاده از لایه واسط مس

محسن عطایی و سید احسان میرصالحی

اسفند 1394

جوشکاری اصطکاکی اغتشاشی اتصالات غیرهمجنس آلومینیوم2024 و مس با طرح اتصال سپری

مستعان لطفعلیان صارمی و سید احسان میرصالحی

اسفند 1394

بررسی ریزساختار و خواص مکانیکی اتصالات لبه روی هم آلیاژهای غیرهم جنس آلومینیم و منیزیم ایجاد شده به روش جوشکاری اصطکاکی اغتشاشی

احمد قیاسوند و سید احسان میرصالحی

بهمن 1394

بررسی تاثیر شرایط لحیم کاری سخت بر اتصالات کاربیدهای سمانته به فولادها در ابزار های حفاری

محمدرضا عامل زاده و سید احسان میرصالحی

بهمن 1394

جوشکاری اصطکاکی اغتشاشی آلیاژهای غیرهمجنس آلومینیوم و منیزیم با افزودن نانوذرات

نیما شریفی اصل و سید احسان میرصالحی

بهمن 1394

ترکیب فرآیند FSW و FSP در تولید نامنو کامپوزیت AA5086-AZ31

سینا میراقایی و کامران دهقانی

دی 1394

بررسی تاثیر طرح اتصال بر خواص مکانیکی و ریز ساختار اتصالات جوشکاری اصطکاکی اغتشاشی لبه روی هم آلومینیوم به آلومینیوم و آلومینیوم به مس

حسین درایتی و سید احسان میرصالحی

مهر 1394

مطالعه ریزساختار و خواص اتصالات غیرمشابه فولاد زنگ نزنAISI 315Lبه فولاد کم آلیاژی ASTM A335-P11 انجام گرفته توسط فرآیند GTAW

مهدی احمدی و سید احسان میرصالحی

تیر 1394

نحوه خروج ابزار و تاثیر آن بر خواص مکانیکی و ریزساختار در هنگام جوشکاری اصطکاکی اغتشاشی اتصالات محیطی آلیاژ آلومینیوم 5456

صالح علائی بهمند و سید احسان میرصالحی

مهر 1393

ایجاد لایه نانو کامپوزیتی Fe/TiC روی فولاد St37 توسط فرآیند GTAW

مهدی فقیهی و سید احسان میرصالحی

مهر 1393

شبیه سازی اجزاء محدود تاثیر منبع سرد کننده دنباله رو روی اعوجاج جوشکاری

فرشاد جعفری ویدوجی و اسلام رنجبرنوده

مهر 1393

اتصال لبه روی هم مس خالص تجاری با استفاده از روش جوشکاری اصطکاکی اغتشاشی

حمید کبیری رنانی و سید احسان میرصالحی

مهر 1393

اتصال غیر همجنس لبه روی هم مس خالص تجاری به فولاد St37 با استفاده از روش جوشکاری اصطکاکی اغتشاشی

حمید رضا اصفهانی و سید احسان میرصالحی

مهر 1393

تاثیر عملیات حرارتی بر ریزساختار و خواص مکانیکی اتصال TLP شده سوپر آلیاژ اینکونل 738

سجاد شاکرین و حمید امیدوار

مهر 1393

بررسی ریزساختار و خواص مکانیکی به منظور بهینه سازی شرایط جوشکاری فرکانس بالا (HFW) در ساخت لوله های انتقال گاز

علی کاوسی سیسی و سید احسان میرصالحی

مهر 1393

کتب

عنوان

نگارندگان/مترجمان

کشور ناشر

تاریخ انتشار

نسخه

ایمنی کار در عملیات جوشکاری و برشکاری ویژه کارگران و کارفرمایان

میرصالحی سید احسان

ایران

ایمنی کار در عملیات جوشکاری و برشکاری ویژه بازرسان کار و مسئولین ایمنی

میرصالحی سید احسان

ایران

استاندارد ملی 25239-4: آلومینیوم- جوشکاری اصطکاکی اغتشاشی قسمت 4: مشخصات وتائید دستورالعمل جوشکاری

میرصالحی سید احسان ، درایتی، حسین ، ایمانیان نجف آبادی ، رضا ، بهرامی فرد ، احمد ، تازیکه،حمید ، دانیالی ، داریوش ، شریفی اصل نیما ، یادگاری،

ایران

استاندارد ملی 25239-5: جوشکاری اصطکاکی اغتشاشی -آلومینیوم- قسمت5: الزامات کیفیت و بازرسی

ایران

استاندارد ملی 4036: جوشکاری و فرآیندهای وابسته- فهرست فرآیندها واعداد مرجع

ایران

استاندارد ملی 25239-1: جوشکاری اصطکاکی همزنی- آلومینیوم -قسمت 1: واژگان

ایران

استاندارد ملی 2-25239: جوشکاری اصطکاکی همزنی-آلومینیوم قسمت 2: طراحی اتصالات جوش

ایران

استاندارد ملی 25239-3: جوشکاری اصطکاکی اغتشاشی -آلومینیوم - قسمت 3: تائید صلاحیت اپراتور جوشکاری

ایران

استاندارد ملی 1-16692: جوشکاری مقاومتی نقطه ای - رابط های الکترود، سره مخروطی نری با شیب 1:10-قسمت1: ثابت کننده مخروطی با شیب 1:10

میرصالحی سید احسان

ایران

استاندارد ملی 2-16692: جوشکاری مقاومتی نقطه ای- رابط های الکترود، سر مخروطی نری با شیب 1:10-قسمت 2: ثابت کننده با ساق استوانه ای برای الکترودهای تحت اعمال نیروی محوری به انتها

میرصالحی سید احسان

ایران

استاندارد ملی 1-16693: کابل های اتصال ثانویه آب خنک برای جوشکاری مقاومتی - قسمت 1: ابعاد و الزامات کابل های اتصال دو رشته ای

میرصالحی سید احسان

ایران

استاندارد ملی 2-16693: کابل های اتصال ثانویه آب خنک برای جوشکاری مقاومتی - قسمت 2: ابعاد و الزامات کابل های اتصال تک رشته ای

میرصالحی سید احسان

ایران

استاندارد ملی 3-16693: کابل های اتصال ثانویه آب خنک برای جوشکاری مقاومتی - قسمت 3: الزامات آزمون

میرصالحی سید احسان

ایران

استاندارد ملی ایران شماره 12044- تعیین نسبت پواسون در دمای اتاق- روش آزمون

میرصالحی سید احسان

ایران

استاندارد ملی ایران شماره 12045- تعیین مدول برشی در دمای اتاق- روش آزمون

میرصالحی سید احسان

ایران

خواص مکانیکی مواد

میرصالحی سید احسان

ایران

مقالات مجلات

BAGHERI MEHRDAD ، MIRSALEHI SEYED EHSAN, "A novel hybrid WAAM-FSP approach for fabrication of ceramic-reinforced aluminum matrix nanocomposites", Journal of Alloys and Compounds, vol. , no. , pp.-, 2025.

ALAEIBEHMAND SALEH ، RanjbarNoodeh Eslam ، MIRSALEHI SEYED EHSAN, "Phase formation in pinless friction stir spot welding of DP600 dual-phase steel to 6061 aluminum alloy dissimilar joints", Materials Characterization, vol. , no. , pp.-, 2025.

ABBASI MILAD ، MIRSALEHI SEYED EHSAN ، PAPI AHMAD, "Additive manufacturing of AA2024/Al2O3 nanocomposites via friction surfacing: Investigating metallurgical, mechanical, and tribological properties", Journal of Materials Research and Technology-Jmr and T, vol. , no. , pp.-, 2025.

ABBASI MILAD ، MIRSALEHI SEYED EHSAN, "Additive manufacturing of AA2024/Al2O3 nanocomposites via friction surfacing: Investigating metallurgical, mechanical, and tribological properties", Journal of Materials Research and Technology-Jmr and T, vol. 36, no. 0, pp.8609-9631, 2025.

AMIRNASIRI ALI ، MIRSALEHI SEYED EHSAN, "Mechanical and Microstructural Investigation of the Effects of BNi-2 Filler Metal Thickness on Boron Carbide Ceramics Diffusion Brazing", Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, vol. , no. , pp.-, 2025.

RAZMJOO HOSSEIN ، MIRSALEHI SEYED EHSAN, "Modified friction stir deposition-Additive manufacturing, an approach to fabricate multi-layered AA5083/CeO2/B4C nano-composites with enhanced corrosion and tribological behavior", Composite Structures, vol. 363, no. , pp.119099-, 2025.

RAZMJOO HOSSEIN ، MIRSALEHI SEYED EHSAN ، ABBASI MILAD ، NAVIDI HELAN MOHAMMAD, "Microstructure, corrosion, and tribological performance of multilayered cylindrical AA5083 parts fabricated by modified friction stir deposition-Additive manufacturing", Materials Characterization, vol. , no. , pp.-, 2025.

ABBASI MILAD ، MIRSALEHI SEYED EHSAN, "Additive friction stir deposition of AA5083/MoS2-diamond hybrid nanocomposites: Investigating their metallurgical, mechanical, tribological, and electrochemical characteristics, and process-structure-property relationships", Journal of Alloys and Compounds, vol. 1013, no. 178553, , 2025.

AMIRNASIRI ALI ، MIRSALEHI SEYED EHSAN, "Investigation of microstructure and mechanical properties of diffusion brazed boron carbide ceramics with Ni-Cr-Si-Fe-B-C filler alloy", Welding In The World, vol. -, no. 0, , 2025.

GHALANDARI MOHAMMAD ALI ، MIRSALEHI SEYED EHSAN ، KIANI SOHEIL, "Production of nanocomposite parts using AA6061-T6 consumable rods via friction stir method: A novel approach of solid-state additive manufacturing of CNT-reinforced aluminum matrix nanocomposites", Materials Today Communications, vol. , no. , pp.-, 2024.

AMIRNASIRI ALI ، MIRSALEHI SEYED EHSAN, "Exploring bonding temperature variations in diffusion brazing of B4C ceramics with Ni-Cr-Si-Fe-B interlayer: Mechanical and microstructural analysis", Ceramics International, vol. , no. , pp.-, 2024.

KIANI SOHEIL ، MIRSALEHI SEYED EHSAN ، SAHRAEI AMIRHOSSEIN, "Linear and cylindrical friction stir additive manufacturing (FSAM) of AA6061-T6 by consumable rods: metallurgical structure, wear, and corrosion properties", Welding In The World, vol. 68, no. 11, pp.2869-2889, 2024.

MASHHURIAZAR AMIRHOSSEIN ، MIRSALEHI SEYED EHSAN ، MORADI KAMBIZ, "An investigation of the effects of parameters on the development of nuggets and the tensile properties of IN-625 during resistance spot welding", Experimental Techniques, vol. , no. , pp.-, 2024.

JAMALI AMIR ، MIRSALEHI SEYED EHSAN ، YAGHOUBI ALI ، FARZADI ALI, "Effect of ex situ Al3Zr intermetallic on cold and hot wear behaviors and mechanical properties of FSPed surface hybrid nanocomposite of high-strength aluminum matrix", Archives of Civil and Mechanical Engineering, vol. 24, no. 3, pp.1-26, 2024.

SAHRAEI AMIRHOSSEIN ، MIRSALEHI SEYED EHSAN, "An investigation on application of friction stir additive manufacturing (FSAM) for the production of AA6061/TiC-graphene hybrid nanocomposite in the shape of multi-layer cylindrical part", Journal of Materials Research and Technology-Jmr and T, vol. 30, no. 101016, pp.6737-6752, 2024.

ABBASI MILAD ، MIRSALEHI SEYED EHSAN ، MIRHOSSEINI SEYYED SABER, "Additive manufacturing of AA5083/TiN-Diamond hybrid nanocomposite parts via additive friction stir deposition: Metallurgical structure, mechanical, tribological, and electrochemical properties", Journal of Materials Research and Technology-Jmr and T, vol. 30, no. 0, pp.8187-8208, 2024.

ZORRIATOLHOSSEINI BEHNAM ، MIRSALEHI SEYED EHSAN ، SHAMSI FAEZEH, "Dissimilar transient liquid phase bonding of Ti-6Al-4V alloy to Inconel 625 superalloy: effect of bonding temperature on microstructural evolutions and mechanical properties", Welding In The World, vol. , no. , pp.-, 2024.

MALEKI VAHID ، Sajad Shakerin ، ZIAEI SEYED ALIREZA ، OMIDVAR HAMID ، MIRSALEHI SEYED EHSAN, "The Effect of Bonding Temperature on the Microstructural and Mechanical Properties of Transient Liquid Phase Bonded Commercially Pure Ti Joint", Journal of Materials Engineering and Performance, vol. 1, no. 1, pp.1-7, 2024.

KIANI SOHEIL ، MIRSALEHI SEYED EHSAN, "Friction stir additive manufacturing of B4C and graphene reinforced aluminum matrix hybrid nanocomposites using consumable pins", Journal of Materials Research and Technology-Jmr and T, vol. 28, no. 28, pp.1094-1110, 2023.

NASAJPOUR ESFAHANI ALI ، FARZADI ALI ، MIRSALEHI SEYED EHSAN, "Impacts of diffusion brazing time on mechanical properties of Nicrofer 5520 superalloy joint by Ni-15Cr-3.7B filler metal", Welding In The World, vol. 68, no. 1, pp.9-21, 2023.

GHIASVAND AHMAD ، RanjbarNoodeh Eslam ، MIRSALEHI SEYED EHSAN, "The microstructure and mechanical properties of single-pass and double-pass lap joint of Al 5754H- 11 and Mg AZ31-O alloys by friction stir welding", Journal of Materials Research and Technology-Jmr and T, vol. 23, no. 0, pp.6023-6038, 2023.

Amin Abdollahzadeh ، BAGHERI VANANI BEHRUZ ، HEIDARI VANEGHI ALIREZA ، Shamsipoor Ali ، MIRSALEHI SEYED EHSAN, "Advances in simulation and experimental study on intermetallic formation and thermomechanical evolution of Al-Cu composite with Zn interlayer: Effect of spot pass and shoulder diameter during the pinless friction stir spot welding process", Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, vol. 237, no. 6, pp.1475-1494, 2022.

NASAJPOUR ESFAHANI ALI ، FARZADI ALI ، MIRSALEHI SEYED EHSAN, "Effect of diffusion brazing time on microstructure, isothermal solidification completion and microhardness distribution during joining of Nicrofer 5520 superalloy using a liquited Ni-Cr_B inretlayer", Journal of Materials Research and Technology-Jmr and T, vol. 21, no. 0, pp.1212-1222, 2022.

CHERAGHI RIZI EMAD ، RanjbarNoodeh Eslam ، MIRSALEHI SEYED EHSAN, "Predicting the quantity and type of intermetallic phases in aluminum-steel dissimilar joints produced by zinc interlayer", Welding In The World, vol. 66, no. 11, , 2022.

BAGHERI VANANI BEHRUZ ، Shamsipoor Ali ، ، MIRSALEHI SEYED EHSAN, "Investigation of SiC Nanoparticle Size and Distribution Effects on Microstructure and Mechanical Properties of Al/SiC/Cu Composite during the FSSW Process: Experimental and Simulation", Metals and Materials International, vol. -, no. 0, , 2022.

JAFARI FARSHAD ، RanjbarNoodeh Eslam ، MIRSALEHI SEYED EHSAN, "Finite element simulation of the effect of trailing heat sink on welding induced distortion of Al 3105", Amirkabir Journal of Mechanical Engineering, vol. 54, no. 8, pp.12-12, 2022.

BAGHERI VANANI BEHRUZ ، ALIZADEH MEDHI ، MIRSALEHI SEYED EHSAN ، Shamsipoor Ali ،, "Nanoparticles Addition in AA2024 Aluminum/Pure Copper Plate: FSSW Approach, Microstructure Evolution, Texture Study, and Mechanical Properties", Jom, vol. 74, no. 0, pp.4420-4433, 2022.

HEIDARI VANEGHI ALIREZA ، BAGHERI VANANI BEHRUZ ، Shamsipoor Ali ، MIRSALEHI SEYED EHSAN ،, "Investigations into the formation of intermetallic compounds during pinless friction stir spot welding of AA2024-Zn-pure copper dissimilar joints", Welding In The World, vol. 66, no. 0, pp.2351-2369, 2022.

BAGHERI VANANI BEHRUZ ، ALIZADEH MEDHI ، MIRSALEHI SEYED EHSAN ، Shamsipoor Ali ،, "The effect of rotational speed and dwell time on Al/SiC/Cu composite made by friction stir spot welding", Welding In The World, vol. 66, no. 0, pp.2333-2350, 2022.

YAGHOUBI ALI ، MIRSALEHI SEYED EHSAN ، JAMALI AMIR, "Investigation on microstructure, mechanical properties and tribological behavior of AlZnMgCu1.5-T6/zirconia surface nanocomposites developed by FSP", Journal of Materials Research and Technology-Jmr and T, vol. 20, no. 0, pp.397-414, 2022.

JAMALI AMIR ، MIRSALEHI SEYED EHSAN, "Investigation on effects of traverse speed and number of passes on mechanical and abrasive properties of AA7075-T6/ZrO2 surface nanocomposite produced using friction stir processing", Welding In The World, vol. 0, no. 0, pp.1-17, 2022.

AMIRNASIRI ALI ، MIRSALEHI SEYED EHSAN, "Effect of contact time parameter on wettability and interface phenomena of B4C substrate by Ni-Cr-Si-Fe-B-C filler alloy", Ceramics International, vol. 48, no. 22, pp.32777-32786, 2022.

TAZIKEH HAMID ، MIRSALEHI SEYED EHSAN ، Shamsipoor Ali, "Investigation of microstructure evolution of Inconel 939 joint diffusion brazed using an amorphous liquated Ni-Cr-Fe-Si-B interlayer", Kovove Materialy-Metallic Materials, vol. 60, no. 4, pp.223-231, 2022.

TAZIKEH HAMID ، MIRSALEHI SEYED EHSAN ، Shamsipoor Ali, "Relationship of isothermal solidification completion and precipitate formation with mechanical properties of Inconel 939 joints vacuum TLP bonded by an amorphous Ni-Cr-Fe-Si-B filler alloy", Journal of Materials Research and Technology-Jmr and T, vol. -, no. 0, , 2022.

NASAJPOUR ESFAHANI ALI ، MIRSALEHI SEYED EHSAN ، FARZADI ALI, "Diffusion brazing of Nicrofer 5520 (IN-617) superalloy using an amorphous Ni-Cr-Si-B interlayer: Microstructura characterization and mechanical properties", Kovove Materialy-Metallic Materials, vol. -, no. 0, , 2022.

Ahmad Malekan ، MIRSALEHI SEYED EHSAN ، Mohammad Farvizi ، Noritaka Saito ، Konihiko Nakashima, "Microstructural evaluation of Hastelloy-X transient liquid phase bonded joints: Effects of filler metal thickness and holding time", Transactions of Nonferrous Metals Society of China, vol. 32, no. 5, pp.1548-1558, 2022.

MORADI KAMBIZ ، MIRSALEHI SEYED EHSAN, "Dissimilar Joining of Low-Carbon Steel to 6061-T6 Aluminum Alloy by Novel Method of Pinless Friction Stir Spot Welding-Brazing", Metals and Materials International, vol. -, no. 0, , 2022.

NASAJPOUR ESFAHANI ALI ، MIRSALEHI SEYED EHSAN ، FARZADI ALI, "Effect of Homogenization on Metallurgical Structure of Nicrofer 5520 (IN-617) Superalloy Joints Diffusion-Brazed Using a Ni-Cr-Si-B Interlayer", Jom, vol. -, no. 0, , 2022.

JAMALI AMIR ، MIRSALEHI SEYED EHSAN, "Production of AA7075/ZrO2 nanocomposite using friction stir processing: Metallurgical structure, mechanical properties and wear behavior", Cirp Journal of Manufacturing Science and Technology, vol. -, no. 0, , 2021.

AMIRNASIRI ALI ، MIRSALEHI SEYED EHSAN, "Investigation of interfacial reactions and wetting behavior of boron carbide by AMS 4777 brazing alloy", Ceramics International, vol. 47, no. 24, pp.34414-34424, 2021.

ALAEIBEHMAND SALEH ، RanjbarNoodeh Eslam ، MIRSALEHI SEYED EHSAN, "Joining mechanism in pinless FSSW of aluminum-steel with or without Zn and brass interlayer", Materials Characterization, vol. 180, no. 111400, pp.1-10, 2021.

TAZIKEH HAMID ، MIRSALEHI SEYED EHSAN ، Shamsipoor Ali, "The effect of bonding temperature on the microstructure and mechanical properties of 939 super alloy by transient liquid phase bonding method", Journal of Welding Science and Technology of Iran, vol. 7, no. 1, pp.81-88, 2021.

ALAEIBEHMAND SALEH ، MIRSALEHI SEYED EHSAN ، RanjbarNoodeh Eslam, "Pinless FSSW of DP600/Zn/AA6061 dissimilar joints", Journal of Materials Research and Technology-Jmr and T, vol. 15, no. 0, pp.996-1006, 2021.

، BAGHERI VANANI BEHRUZ ، Abbasi Mahmoud ، Farzaneh Sharifi ، MIRSALEHI SEYED EHSAN ، Ahmad Ostovari Moghaddam, "A modified version of friction stir welding process of aluminum alloys: Analyzing the thermal treatment and wear behavior", Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, vol. 235, no. 10, pp.2291-2309, 2021.

BAKHTIARI FARHAD ، Shamsipoor Ali ، MIRSALEHI SEYED EHSAN, "Preparation of bimetallic nano-composite by dissimilar friction stir welding of copper to aluminum alloy", Transactions of Nonferrous Metals Society of China, vol. 31, no. 5, pp.1363-1380, 2021.

SADEGHIAN AMIRHOSSEIN ، MIRSALEHI SEYED EHSAN ، ARHAMI FARZAM ، Ahmad Malekan ، Noritaka Saito ، Konihiko Nakashima, "Effect of Bonding Time on Dissimilar Transient Liquid Phase (TLP) Bonding of IN939 to IN625 Superalloys: Microstructural Characterization and Mechanical Properties", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, vol. 52A, no. 0, pp.1526-1539, 2021.

AMELZADEH MOHAMMADREZA ، MIRSALEHI SEYED EHSAN, "Dissimilar joining of WC-Co to steel by low-temperature brazing", Materials Science and Engineering B-Advanced Functional Solid-State Materials, vol. 259, no. 0, pp.114597-0, 2020.

RAHMATIAN BEHROOZ ، DEHGHANI KAMRAN ، MIRSALEHI SEYED EHSAN, "Effect of adding SiC nanoparticles to nugget zone of thick AA5083 aluminium alloy joined by using double-sided friction stir welding", Journal of Manufacturing Processes, vol. 52, no. 0, pp.152-164, 2020.

BAGHERI VANANI BEHRUZ ، mahmoud abbasi ، ، MIRSALEHI SEYED EHSAN, "Effect of second-phase particle size and presence of vibration on AZ91/SiC surface composite layer produced by FSP", Transactions of Nonferrous Metals Society of China, vol. 30, no. 4, pp.905-916, 2020.

Ahmad Malekan ، Mohammad Farvizi ، MIRSALEHI SEYED EHSAN ، Noritaka Saito ، Konihiko Nakashima, "Holding time influence on creep behavior of transient liquid phase bonded joints of Hastelloy X", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 772, no. 0, pp.138694-0, 2020.

Ahmad Malekan ، Mohammad Farvizi ، MIRSALEHI SEYED EHSAN ، Noritaka Saito ، Kunihiko Nakashima, "Effect of bonding temperature on the microstructure and mechanical properties of Hastelloy X superalloy joints bonded with a Ni-Cr-B-Si-Fe interlayer", Journal of Manufacturing Processes, vol. 47, no. 0, pp.129-140, 2019.

ATAEI MOHSEN ، Shamsipoor Ali ، MIRSALEHI SEYED EHSAN, "Microstructural characterization and mechanical properties of diffusion-brazed AZ91C magnesium alloy to 316L stainless steel", Kovove Materialy-Metallic Materials, vol. 57, no. 5, pp.299-306, 2019.

AMELZADEH MOHAMMADREZA ، MIRSALEHI SEYED EHSAN, "Dissimilar vacuum brazing of cemented carbide to steel using double-layer filler metals", Journal of Manufacturing Processes, vol. 47, no. 0, pp.1-9, 2019.

SADEGHIAN AMIRHOSSEIN ، ARHAMI FARZAM ، MIRSALEHI SEYED EHSAN, "Phase formation during dissimilar transient liquid phase (TLP) bonding of IN-939 to IN-625 using a Ni-Cr-Fe-Si-B interlayer", Journal of Manufacturing Processes, vol. 44, no. 0, pp.72-80, 2019.

RAHMATIAN BEHROOZ ، MIRSALEHI SEYED EHSAN ، DEHGHANI KAMRAN, "Metallurgical and Mechanical Characterization of Double-Sided Friction Stir Welded Thick AA5083 Aluminum Alloy Joints", Transactions of The Indian Institute of Metals, vol. 0, no. 0, , 2019.

KAVOUSI SISI ALI ، MIRSALEHI SEYED EHSAN, "Effect of PWHT Larson-Miller Parameter on Mechanical Properties and Microstructure of Line Pipe Microalloyed Steel Joints", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, vol. -, no. 0, , 2019.

Ahmad Malekan ، Mohammad Farvizi ، MIRSALEHI SEYED EHSAN ، Noritaka Saito ، Kunihiko Nakashima, "Influence of bonding time on the transient liquid phase bonding behavior of Hastelloy X using Ni-Cr-B-Si-Fe filler alloy", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 755, no. 0, pp.37-79, 2019.

ALIAKBARI SAEED ، KETABCHI MOSTAFA ، MIRSALEHI SEYED EHSAN, "Effect of Through-Thickness Friction Stir Processing Parameters on Weld Repair and Modification of Fusion-Welded AA6061 Aluminum Alloy", Journal of Materials Engineering and Performance, vol. .0, no. 0, , 2019.

SHARIFI ASL NIMA ، MIRSALEHI SEYED EHSAN ، DEHGHANI KAMRAN, "Effect of TiO2 nanoparticles addition on microstructure and mechanical properties of dissimilar friction stir welded AA6063-T4 aluminum alloy and AZ31B-O magnesium alloy", Journal of Manufacturing Processes, vol. 38, no. 0, pp.338-354, 2019.

KABIRI RENANI HAMID ، MIRSALEHI SEYED EHSAN, "Optimization of FSW lap joining of pure copper using Taguchi method and grey relational analysis", Materials Research Express, vol. 6, no. 5, pp.56525-0, 2019.

ARHAMI FARZAM ، MIRSALEHI SEYED EHSAN ، SADEGHIAN AMIRHOSSEIN ، Mohammad Hossein Johar, "The joint properties of a high-chromium Ni-based superalloy made by diffusion brazing: Microstructural evolution, corrosion resistance and mechanical behavior", Journal of Manufacturing Processes, vol. 0, no. 0, , 2018.

BAKHTIARI FARHAD ، Shamsipoor Ali ، MIRSALEHI SEYED EHSAN, "Dissimilar Joining of Pure Copper to Aluminum Alloy via Friction Stir Welding", Acta Metallurgica Sinica-English Letters, vol. 31, no. 11, pp.1183-1196, 2018.

ARHAMI FARZAM ، MIRSALEHI SEYED EHSAN, "The effect of heat treatment sequence on microstructure and mechanical properties of diffusion brazed IN-939 superalloy", Journal of Materials Processing Technology, vol. 0, no. 0, , 2018.

AMELZADEH MOHAMMADREZA ، MIRSALEHI SEYED EHSAN, "Influence of braze type on microstructure and mechanical behavior of WCCo/ steel dissimilar joints", Journal of Manufacturing Processes, vol. 36, no. 0, pp.450-458, 2018.

FARZADI ALI ، ESMAEILI HASSAN ، MIRSALEHI SEYED EHSAN, "Transient liquid phase bonding of Inconel 617 superalloy: effect of filler metal type and bonding time", Welding In The World, vol. 63, no. 1, pp.191-200, 2018.

ARHAMI FARZAM ، MIRSALEHI SEYED EHSAN ، SADEGHIAN AMIRHOSSEIN, "Effect of bonding time on microstructure and mechanical properties of diffusion brazed IN-939", Journal of Materials Processing Technology, vol. 0, no. 0, , 2018.

ARHAMI FARZAM ، MIRSALEHI SEYED EHSAN, "Microstructural Evolution and Mechanical Properties Evaluation of IN-939 Bonds Made by Isothermal Solidification of a Liquated Ni-Cr-B Interlayer", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, vol. 0, no. 0, , 2018.

QAHRI SAREMI SOHRAB ، MIRSALEHI SEYED EHSAN ، Shamsipoor Ali, "Transient liquid phase bonding of AZ31 magnesium alloy: Metallurgical structure and mechanical properties", Journal of Manufacturing Processes, vol. 35, no. 0, pp.140-148, 2018.

ALIAKBARI SAEED ، KETABCHI MOSTAFA ، MIRSALEHI SEYED EHSAN, "Through-thickness friction stir processing; a low-cost technique for fusion welds repair and modi fi cation in AA6061 alloy", Journal of Manufacturing Processes, vol. 35, no. 0, pp.226-232, 2018.

ALIASGARIAN REZA ، NADERI MALEK ، MIRSALEHI SEYED EHSAN, "Ablation mechanism of ZrB2-SiC coating for SiC-coated graphite under an oxyacetylene flame", Surface and Coatings Technology, vol. 350, no. 0, pp.511-518, 2018.

ALIASGARIAN REZA ، NADERI MALEK ، MIRSALEHI SEYED EHSAN ، Saeed Safi, "The Ablation and Oxidation Behaviors of SiC Coatings on Graphite Prepared by Slurry Sintering and Pack Cementation", Journal of Materials Engineering and Performance, vol. 0, no. 0, pp.1-11, 2018.

ESMAEILI HASSAN ، MIRSALEHI SEYED EHSAN ، FARZADI ALI, "Vacuum TLP bonding of Inconel 617 superalloy using Ni-Cr-Si-Fe-B filler metal: Metallurgical structure and mechanical properties", Vacuum, vol. 152, no. 0, pp.305-311, 2018.

ALIASGARIAN REZA ، NADERI MALEK ، MIRSALEHI SEYED EHSAN ، Saeed safi, "The ablation behavior of ZrB2-SiC coating prepared by shrouded plasma spray on SiC-coated graphite", Journal of Alloys and Compounds, vol. 742, no. 0, pp.797-803, 2018.

ESMAEILI HASSAN ، MIRSALEHI SEYED EHSAN ، FARZADI ALI, "Effect of joining atmosphere in transient liquid phase bonding of Inconel 617 superalloy", Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, vol. 0, no. 0, , 2017.

SHAKERIN SAJAD ، MALEKI VAHID ، ZIAEI SEYED ALIREZA ، OMIDVAR HAMID ، Mohammad Reza Rahimipour ، MIRSALEHI SEYED EHSAN, "Microstructural and mechanical assessment of transient liquid phase bonded commercially pure titanium", Canadian Metallurgical Quarterly, vol. 56, no. 3, pp.360-367, 2017.

AMELZADEH MOHAMMADREZA ، MIRSALEHI SEYED EHSAN, "Investigation on effect of holding time in brazing of steel to cemented carbide using Cu-Ag alloy filler metal", , vol. 2, no. 2, pp.38-46, 2017.

LOTFALIAN SAREMI MOSTAAN ، MIRSALEHI SEYED EHSAN ، Shamsipoor Ali, "Investigation on Metallurgical Structure and Mechanical Properties of Dissimilar Al 2024/Cu FSW T-joints", Transactions of The Indian Institute of Metals, vol. 0, no. 0, , 2016.

HEJAZI EMAN ، MIRSALEHI SEYED EHSAN, "Mechanical and metallurgical characterization of AA6061 friction stir welded joints using microhardness map", Transactions of Nonferrous Metals Society of China, vol. 26, no. 9, pp.2313-2319, 2016.

ALAEI BEHMAND SALEH ، MIRSALEHI SEYED EHSAN ، OMIDVAR HAMID ، Mohammad Ali Safarkhanian, "Interfacial and Mechanical Behavior of AA5456 Filling Friction-Stir-Welded Lap Joints Using Similar and Dissimilar Pins", Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, vol. 0, no. 0, , 2016.

HEJAZI EMAN ، MIRSALEHI SEYED EHSAN, "Effect of pin penetration depth on double-sided friction stir welded joints of AA6061-T913 alloy", Transactions of Nonferrous Metals Society of China, vol. 26, no. 3, pp.676-683, 2016.

SHAKERIN SAJAD ، OMIDVAR HAMID ، MIRSALEHI SEYED EHSAN, "The effect of substrates heat treatment on microstructural and mechanical evolution of transient liquid phase bonded IN-738 LC", Materials and Design, vol. 89, no. 1, pp.611-619, 2016.

KAVOUSI SISI ALI ، MIRSALEHI SEYED EHSAN, "Prediction of microstructure and mechanical properties of line pipe welded joints based on hardness map", Science and Technology of Welding and Joining, vol. -, no. 0, , 2015.

ALAEI BEHMAND SALEH ، MIRSALEHI SEYED EHSAN ، OMIDVAR HAMID ، Mohammad Ali Safarkhanian, "Single- and double-pass FSW lap joining of AA5456 sheets with different thicknesses", Materials Science and Technology, vol. 0, no. 0, , 2015.

AHMADI MAHDI ، MIRSALEHI SEYED EHSAN, "Investigation on microstructure, mechanical properties and corrosion behavior of AISI 316L stainless steel to ASTM A335-P11 low alloy steel dissimilar welding joints", Materials At High Temperatures, vol. 0, no. 0, , 2015.

ALAEI BEHMAND SALEH ، MIRSALEHI SEYED EHSAN ، OMIDVAR HAMID ، Ali Mohammad Safarkhanian, "Filling exit holes of friction stir welding lap joints using consumable pin tools", Science and Technology of Welding and Joining, vol. -, no. 0, , 2015.

KAVOUSI SISI ALI ، MIRSALEHI SEYED EHSAN, "Effect of post weld heat treatment on microstructure and mechanical properties of X52 linepipe HFIW joints", Journal of Materials Engineering and Performance, vol. -, no. 0, , 2015.

ESFAHANI HAMID REZA ، MIRSALEHI SEYED EHSAN, "Investigation on microstructure and mechanical properties of friction stir welded lap joints between commercially pure copper and St37-2 mild steel", Journal of Metallurgy and Materials Science, vol. 56, no. 4, pp.231-238, 2014.

MIRSALEHI SEYED EHSAN ، Ali Mohammad Hadian, "Thermodynamic modelling of wetting in a B4C/Ni-Cr-Si system", Modelling and Simulation In Materials Science and Engineering, vol. 18, no. 8, pp.85012-85025, 2010.

MIRSALEHI SEYED EHSAN ، Ali Mohammad Hadian, "Study of interface interactions in B4C/Ni-Cr-Si system", Applied Surface Science, vol. 257, no. 2, pp.628-634, 2010.

MIRSALEHI SEYED EHSAN ، Amir Hossein Kokabi, "Fatigue life estimation of spot welds using a crack propagation-based method with consideration of residual stresses effect", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 527, no. 23, pp.6359-6363, 2010.

MIRSALEHI SEYED EHSAN ، Ali Mohammad Hadian, "Investigation on wetting behaviour of B4C by Ni based brazing alloys", Science and Technology of Welding and Joining, vol. 15, no. 1, pp.48-53, 2010.

Amir Hossein Kokabi ، MIRSALEHI SEYED EHSAN, "Fatigue life estimation of resistance spot welding joints using fracture mechanics", Journal of Welding Engineering, vol. 19, no. 19, pp.18-24, 2005.

مقالات همایش‌ها

NAZARI ALI ، Abbasi Mahmoud ، MIRSALEHI SEYED EHSAN, "Effect of friction stir processing on microstructure and mechanical properties of low carbon steel welds made by resistance spot welding,", The 13th International Conference on Materials Engineering and MetallurgyThe 13th International Conference on Materials Engineering and Metallurgy, Dec 2024.

NAZARI ALI ، Abbasi Mahmoud ، MIRSALEHI SEYED EHSAN, "Effect of high pressure torsion on microstructure and mechanical properties of low carbon steel welds made by resistance spot welding,", The 13th International Conference on Materials Engineering and Metallurgy, Dec 2024.

CHERAGHI RIZI EMAD ، RanjbarNoodeh Eslam ، MIRSALEHI SEYED EHSAN, "Predicting the Quantity and Type of Intermetallic Phases in Aluminum - Steel Dissimilar Joints Produced by Zinc Interlayer,", 4th International Conference onWelding and Non Destructive Testing(ICWNDT 2022), Mar 2022.

CHERAGHSAHAR KIASARAEE SAEED ، RanjbarNoodeh Eslam ، MIRSALEHI SEYED EHSAN, "Analysis and study of distortion and residual stresses in the layer produced from Ti6Al4V alloy by selective laser melting method,", 4th International Conference on Welding and Non Destructive Testing(ICWNDT 2022(, Mar 2022.

BAGHERI VANANI BEHRUZ ، ، mahmoud abbasi ، CHERAGHI RIZI EMAD ، MIRSALEHI SEYED EHSAN, "Comparison of the Arbitrary-Lagrangian-Eulerian and Coupled-Eulerian-Lagrangian methods during simulation of the friction stir spot welding,", 16th Annual and 5th International Conference on Manufacturing Engineering (ICME2018), Dec 2019.

BAGHERI VANANI BEHRUZ ، ، mahmoud abbasi ، HAMIDI JAVAD ، MIRSALEHI SEYED EHSAN, "Improved weld microstructure, machining and mechanical characteristics of Al5083 joint during the friction stir spot vibration welding,", 16th Annual and 5th International Conference on Manufacturing Engineering (ICME2018), Dec 2019.

RanjbarNoodeh Eslam ، SADEGHIAN AMIRHOSSEIN ، MIRSALEHI SEYED EHSAN, "Prediction of welding induced distortion in stiffened plate Al 5083 using inherent deformation method,", The international conference on Electrical,Computer and Mechanical Engineering of Iran, Feb 2018.

JAFARI FARSHAD ، RanjbarNoodeh Eslam ، MIRSALEHI SEYED EHSAN ، SHADKAM SAEED, "The finite element Simulation of effects of the trailing heat sink on the distortion caused by aluminum welding 3105,", 18th National conference of welding and inspection and 7 th National conference of NDT, Feb 2018.

TAMIZI JOUNEGHANI MOHAMMAD REZA ، Mahmoud Rasouli ، MIRSALEHI SEYED EHSAN, "Effect of pin height on shear strength of AA6061 friction stir spot weld,", 6th international conference on materials engineering and metallurgy, Oct 2017.

BAKHTIARI FARHAD ، Shamsipoor Ali ، MIRSALEHI SEYED EHSAN, "Influence of addition SiC nano powder on mechanical properties of Cu-Al dissimilar joints with Friction Stir welding,", 5th INTERNATIONAL CONFERENCE ON ENGINEERING MATERIALS AND METALLURGY, Nov 2016.

HOSEINPOOR MOEIN ، RanjbarNoodeh Eslam ، MIRSALEHI SEYED EHSAN, "Numerical investigation of cold cracking in service welding,", International conference on researches in science and engineering, Jul 2016.

TORABI MOHSEN ABAD BEHROUZ ، MIRSALEHI SEYED EHSAN ، NADERI MALEK, "Modeling of mechanical properties and metallurgical structure of friction stir welded pure copper Tjoints using micro hardness map,", 1st International Conference on New Research Achievements in Mechanics, Mechatronics & Biomechanics, May 2016.

AMELZADEH MOHAMMADREZA ، MIRSALEHI SEYED EHSAN, "Investigation of effect of Ni in brazed joint of cemented carbide-steel utilized in drilling bits,", The 3rd International Conference & Exhibition of Oil, Gas and Petrochemical, Dec 2015.

GHIASVAND AHMAD ، MIRSALEHI SEYED EHSAN ، RanjbarNoodeh Eslam, "Investigation of Single-pass and double-pass friction stir welding lap joints of aluminum and magnesium alloys,", 16th National conference on welding and inspection, Dec 2015.

MIRAGHAIE SINA ، DEHGHANI KAMRAN ، MIRSALEHI SEYED EHSAN, "The influence of rotational and traverse speed on microstructure and hardness of Al 5086 / TiO2 nanocomposites fabricated by friction stir processing,", 4th International Engineering Materials & Metallurgy Conference, Nov 2015.

AMELZADEH MOHAMMADREZA ، MIRSALEHI SEYED EHSAN, "Investigate effect of chemical composition of filler in brazed joint of cemented carbide-AISI4145 steel,", 4th International Engineering Materials & Metallurgy Conference, Nov 2015.

MIRAGHAIE SINA ، DEHGHANI KAMRAN ، MIRSALEHI SEYED EHSAN ، TAJBAKHSHJOU ZOHREH, "The effect of reinforcing titanium oxide nanoparticles on the properties of AZ31 sheet by friction stir processing,", 4th International Engineering Materials & Metallurgy Conference, Nov 2015.

LOTFALIAN SAREMI MOSTAAN ، MIRSALEHI SEYED EHSAN ، Shamsipoor Ali, "Weldability and mechanical properties of t-joint fsw of Al alloy to Cu,", 4th International Engineering Materials & Metallurgy Conference, Nov 2015.

HEJAZI EMAN ، MIRSALEHI SEYED EHSAN, "Modeling of mechanical properties and micro-macro structure of friction stir welded butt joints using microhardness map,", 4th International Engineering Materials & Metallurgy Conference, Nov 2015.

GHIASVAND AHMAD ، MIRSALEHI SEYED EHSAN ، RanjbarNoodeh Eslam, "Friction stir welding lap joint of 5754 aluminum alloy and AZ31 magnesium alloy,", 4th International Engineering Materials & Metallurgy Conference, Nov 2015.

LOTFALIAN SAREMI MOSTAAN ، MIRSALEHI SEYED EHSAN, "Evaluation of weldability and mechanical properties of T-joint Friction stir welding of aluminum alloys and copper,", 2nd national conference of material engineering, Feb 2015.

TORABI MOHSEN ABAD BEHROUZ ، MIRSALEHI SEYED EHSAN, "Mechanical properties in comparison with the single-seam and two-seam T-joint mode Friction stir welding of copper,", 2nd National Conference on Materials Engineering, Feb 2015.

HEJAZI EMAN ، MIRSALEHI SEYED EHSAN, "Effect of Pin Length on Friction Stir Welding Joints of AA6061-T913 Aluminum Alloys,", 2nd National Conference on Materials Engineering, Feb 2015.

HEJAZI EMAN ، MIRSALEHI SEYED EHSAN, "Mechanical properties of double-sided AA6061-T913 Friction Stir Welded butt joints,", 15th National Welding and Inspection Conference, Dec 2014.

TORABI MOHSEN ABAD BEHROUZ ، MIRSALEHI SEYED EHSAN, "Study of mechanical properties of friction stir welding T-joint of copper,", Fifteenth National Conference of welding and inspection and the Fourth National Conference on Non-Destructive Testing, Dec 2014.

KAVOUSI SISI ALI ، MIRSALEHI SEYED EHSAN, "Mechanical properties modeling of longitudinal gas transmission linepipes weld using hardness map,", 3rd international engineering materials & metallurgy conference, Nov 2014.

SHAKERIN SAJAD ، OMIDVAR HAMID ، MIRSALEHI SEYED EHSAN ، MALEKI VAHID ، Hossein Ganjipour, "The effect of heat treatment on microstructure and mechanical properties in TLP bonded IN-738 LC superalloy,", 3rd international engineering materials & metallurgy conference, Nov 2014.

ALAEI BEHMAND SALEH ، MIRSALEHI SEYED EHSAN ، OMIDVAR HAMID ، mohammadali safarkhanian, "Filling friction stir welding exit hole with consumable pin tools by different plunging technique,rotation speed and time,", 3rd International Engineering Materials and Metallurgy Conference and Exhibition, Nov 2014.

SHAKERIN SAJAD ، OMIDVAR HAMID ، MIRSALEHI SEYED EHSAN ، MALEKI VAHID ، Hosein Ganjipour, "The effect of heat treatment on microstructure and mechanical properties in TLP bonded IN-738 LC superalloy,", 3rd international engineering materials & metallurgy conference, Nov 2014.

KAVOUSI SISI ALI ، MIRSALEHI SEYED EHSAN, "Investigation on the effect of Larson-Miller parameter of post-weld heat-treated X52 micro alloy steel joints,", 3rd international engineering materials & metallurgy conference, Nov 2014.

ALAEI BEHMAND SALEH ، MIRSALEHI SEYED EHSAN ، OMIDVAR HAMID ، Mohammad Ali Safarkhanian, "Effect of tool tilt angle on defect formation and mechanical properties in double-pass FSW lap joining of AA5456 alloy,", the second regional conference on welding engineering and inspection(RCWEI), Oct 2014.

ALAEI BEHMAND SALEH ، MIRSALEHI SEYED EHSAN ، OMIDVAR HAMID ، Mohammad Ali Safarkhanian, "Removing exit hole of friction stir welding lap joints by using consumable pin tools,", the second regional conference on welding engineering and inspection(RCWEI), Oct 2014.

AHMADI MAHDI ، MIRSALEHI SEYED EHSAN, "Microstructure and Impact Properties of AISI 316L Stainless Steel to ASTM A335-P11 Low Alloy Steel Dissimilar Joints Produced by GTAW,", 14th national Conference on Welding and Non Destructive Testing, Feb 2014.

MOHAMMADPOUR ROUDBARAKI FARIBORZ ، MIRSALEHI SEYED EHSAN, "The use of robotic NDE inspection for welding joints used in automotive body,", 14th National Conference on Welding & Inspection (14th NCWI) & 3rd National Conference on NDT ( 3rd NCNDT), Feb 2014.

MOHAMMADPOUR ROUDBARAKI FARIBORZ ، MIRSALEHI SEYED EHSAN, "The method of spot welding without destructive and non-destructive testing by optimizing the welding parameters,", 14th National Conference on Welding & Inspection (14th NCWI) & 3rd National Conference on NDT ( 3rd NCNDT), Feb 2014.

EBADI ASAR MANOOCHEHR ، Parvin Nader ، MIRSALEHI SEYED EHSAN, "Investigation on effect of filler metal type on copper foil to brass sheet brazing joint,", 14th National Conference on Welding & Inspection (14th NCWI) & 3rd National Conference on NDT (3rd NCNDT), Feb 2014.

ESFAHANI HAMID REZA ، MIRSALEHI SEYED EHSAN, "Investigation on microstructure and mechanical properties of FSW lap joints between commercially pure copper and St37-2 mild steel,", 14th national Conference on Welding and Non Destructive Testing, Feb 2014.

ALAEI BEHMAND SALEH ، MIRSALEHI SEYED EHSAN ، OMIDVAR HAMID ، Mohammad Ali Safarkhanian, "Effect of two pass friction stir lap welding parameters on AA5456 mechanical properties,", 14th national conference on welding & inspection, Feb 2014.

KABIRI RENANI HAMID ، MIRSALEHI SEYED EHSAN, "Optimization of friction stir welding of commercially pure copper Lap joint with Taguchi method based on Grey analysis and ANOVA analysis,", 14th NATIONAL CONFERENCE WELDING & INSPECTION, Feb 2014.

MOHAMMADPOUR ROUDBARAKI FARIBORZ ، MIRSALEHI SEYED EHSAN, "Determination of the Suitable Method for Non-Destructive Testing of GMAW Joints Employed in Automotive Body,", The first Regional Conference on Welding Engineering and Inspection, Oct 2013.

KABIRI RENANI HAMID ، MIRSALEHI SEYED EHSAN, "Mechanical properties of friction stir welded copper lap joints,", The first Regional Conference on Welding Engineering and Inspection, Oct 2013.

NEKOEI AMIN ، MIRSALEHI SEYED EHSAN, "Investigation on Roll welding of 1100 Aluminum to itself and to Copper Strips,", The first Regional Conference on Welding Engineering and Inspection, Oct 2013.

MIRSALEHI SEYED EHSAN ، Ali Mohammad Hadian, "Investigation on wetting behavior of boron carbide by nickel-based brazing alloys,", 7th Iranian Ceramic Congress, Apr 2009.

Amir Hossein Kokabi ، MIRSALEHI SEYED EHSAN, "Fatigue life estimation of resistance spot welding joints by crack propagation method and study of residual stresses effect on fatigue life,", 7th Iranian National Conference on Welding and Inspection, Dec 2005.

دروس ارائه شده

عنوان درس

توصیف درس

سرفصل ها

دوره درسی

Non-Destructive Testing

4051

Introduction to Manufacturing Processes

آشنایی دانشجویان با فرآیندهای مختلف ساخت و نحوه انتخاب مواد و فرآیند در هنگام ساخت

4042

Welding Engineering Design

آشنایی دانشجویان با اصول طراحی اتصالات جوشکاری و مسائل و ملاحظات مربوطه

4042

Non-Destructive Testing

4041

Advanced Welding

4041

Introduction to Manufacturing Processes

4032

Welding Engineering Design

4032

Soldering & Brazing

4032

Welding Quality Control

4032